+ All Categories
Home > Documents > 960 fadc tdc

960 fadc tdc

Date post: 26-Jan-2016
Category:
Upload: favian
View: 63 times
Download: 0 times
Share this document with a friend
Description:
168 fadc tdc. Electronics Channels. 960 fadc tdc. 2500 fadc. start 40 fadc tdc. 5 Kbytes/event. x 200 KHz level 1. = 1 Gbyte/second. upv 21 fadc. Deadtimeless. 40 fadc. 3240 fadc. 2900 tdc 11400 fadc. 192 fadc tdc. Paul Smith Indiana University. 8 bits, 250 MSPS. - PowerPoint PPT Presentation
Popular Tags:
9
960 fadc tdc 2500 fadc 3240 fadc 168 fadc tdc 192 fadc tdc 2900 tdc 11400 fadc 40 fadc start 40 fadc tdc upv 21 fadc 5 Kbytes/event x 200 KHz level 1 = 1 Gbyte/second Electronics Channels Deadtimeless Paul Smith Indiana University
Transcript
Page 1: 960 fadc tdc

960fadctdc

2500fadc

3240fadc

168fadctdc

192fadctdc

2900tdc

11400fadc

40fadc

start40

fadctdc

upv21

fadc

5 Kbytes/event

x 200 KHz level 1

= 1 Gbyte/second

Electronics Channels

Deadtimeless

Paul SmithIndiana University

Page 2: 960 fadc tdc
Page 3: 960 fadc tdc
Page 4: 960 fadc tdc

3 types of FADCs?

8 bits, 250 MSPS10-12 bits, 125

MSPS8-12 bits, 62.5

MSPS

4000 channels 3240 channels 11,400 channels

Calorimeters-energy sum

Central TrackingForward Drift

Cathodes

Other PMT/SiPMT dE/dX

low densityhigh density

low cost

Page 5: 960 fadc tdc

Indiana University

Page 6: 960 fadc tdc

FCAL Cockcroft-Walton PMT base

RadPhi

E852 GlueX

100 Prototypes constructed at IU

Selectiveassemblyrobot

Page 7: 960 fadc tdc

Andy Lankford (UC Irvine), Glenn Young (ORNL), and John Domingo(JLab)

GlueX Electronics Review - July 23 2003

Page 8: 960 fadc tdc

Selected Review Conclusions:

...characteristics are sound and appropriate choices for GlueX

The decision to standardize all detector readout on a single TDC module design and a single Flash ADC module design is good, and will help simplify the overall electronics system design in a constructive way and conserve valuable engineering resources. The Committee feels that it is desirable to locate these modules in a radiation-free area if possible, in order to improve access.

Although the GlueX electronics design parameters (e.g. data rates) exceed current JLab experiments, they do not exceed the performance of other contemporary experiments.

More manpower will be needed in order to fully realize the GlueX electronics system. Considerable special (technical) expertise will also be required.

The requirements and specifications of the analog front-end electronics are not yet adequately defined. This is coupled to the tentative status of some detector designs. The lack of full definition of detector designs may soon limit progress on electronics design...

!

Page 9: 960 fadc tdc

TAG UPV STC CDC FDC BCAL CKOV TOF FCAL

PMT?SiPM?Disc

PMT?SiPM?Pream

p

PMT?SiPM?Disc

Preamp

Preamp

Disc

SiPMDisc

Preamp

DiscCWPMTbase

FADC FADC FADC FADC FADC FADC FADC FADC FADC

TDC TDC TDC TDC TDC

Energy

Sum

TrackCount

Energy

Sum TrackCount

Energy

SumTrackCount

“good” shape

R&D in progress

need further definition

Detector:

On-detector

Electronics:

L1 Trigger:

Digitizer:

Status

Paul SmithIndiana University

GlueX detector reviewOctober 24, 2004


Recommended