Date post: | 16-Dec-2015 |
Category: |
Documents |
Upload: | kailey-harm |
View: | 233 times |
Download: | 0 times |
960H- Start GuideRecord Setup
For Motion Setup: Log into Alarm; then go to Motion Detect. Setup each channel forMotion recording one by one.
For Record Setup Login to your DVR: go To Record Channel, then click on recordConfig, setup recording how you want here.
Motion SetupRecord General
960H- Start GuideSearch & Playback Local
You Can do a play back two different ways…
You can go to “playback” before you login to main menu.
You can go to “playback” after you login to main menu.
960H- Start GuideSearch & Playback Local
Select the channels you would like to see,
depending on the way the HVR is setup to in Channel
Type. For example, you can have up to 8ch
playback on 1611Z-960H; set on 16 @ 960H and 4Ch
playback on 811Z-960H; set on 8 @ 960H.
The days highlighted
with a green square will be
the days available.
Time layout is in 24Hour format, you
can double click within the channel to just to a certain time; you will only see four channels below, if you
have a 8/16CH and you want to see video
from 5,6,7,8 then select those cameras.
Channels Edit Toolbar
In Sync mode you can play back all
the camera at the same time on a
4CH view.
960H- Start GuideSearch & Playback Remote
Once you log in your DVR Remote click on “playback.”
Click here to search by
“time”Click here to
search by “events”
Select the channel you want to see; in “event” search you can only do one channel at a time; on “time” search you
can select multiple channels.
Select Event type or all video; then
select your from and to date and
time.
960H- Start GuideSearch & Playback Remote
When you do and Event search for all
event, you will get a list like the one on the left. You can either playback
events from here or backup events from
here.
You can only view a total of 64 lines in the search field; if you
want to go to the next 64 line you simply click on the “Page Down.”
960H- Start GuideSearch & Playback Remote
Select a file you want to view; you can double click the file to bring it
up or you can check the ones you want to see and click on play to go
through all the ones you have selected.
You can also download your data from here. Simply click on the files you want to back up and put a checkmark in the box
and click download. You will be prompted to select file type and save location as
described on the next page.