www.begcontrols.com
ControlsB.E.G.
Project name: Type
Catalog number:
Location:
Date:
Comments:
FLEX-230
Product Code Description Color Part Number
FLEX-230 FLEX 230° Indoor/Outdoor Motion Sensor, Surface Mount, 120-277V White 97007
FLEX-230-BLK FLEX 230° Indoor/Outdoor Motion Sensor, Surface Mount, 120-277V Black 97207
Accessories
IR-ADAPTER IR-Adapter for Smartphones (phone by others) to enable use of Smart-phone Remote Control App Black 92726
Wire basket BSK / white Protective wire guard/basket for FLEX White 92467
TOP FEATURES
■ Line voltage PIR motion sensor with 230° detection coverage and integral photosensor
■ 360° creep zone detection
■ Robust tilt and rotation adjustment of ball sensor head enables flexible mounting and aiming
■ Suitable for indoor and outdoor use. Damp and wet locations!
■ Works out of the box with factory settings
■ Full range of settings are remotely adjusted using our Android or iOS smartphone apps
■ Protective wire guard/basket cover available
DESCRIPTION
The FLEX-230 delivers superior 230-degree motion detection coverage and excellent range. The combination of passive Infrared (PIR) motion detection and a photosensor enables daytime and nighttime operation for optimal security and energy savings. The 360-degree look-down anti-creep protection provides additional security. The FLEX-230 provides single-pole, single phase circuit control at 120-277 VAC. The ball head and housing offers robust adjustment in aiming the sensor to enable a wide variety of coverage and mounting orientation. The plug base and socket construction simplifies installation and maintenance. An accessory wire guard/basket cover is available to protect the sensor from vandalism and tampering. All of the settings of the FLEX-230 are remotely adjusted using our iOS or Android smartphone app. Mechanical adjustments can be made for range, time-out, and daylight level threshold. Masking blinds are included to limit the detection coverage pattern and range in certain applications to prevent false triggers and interference.
OPERATION
The FLEX-230 detects both motion and the ambient light level and then automates the lights according to the parameters set by the building management. Using the factory settings, the integrated light sensor constantly measures the ambient light, and if the light level is below the set threshold the lights will be switched on when motion is detected. If the ambient light level is above the set threshold, the lights will not be allowed to come on. If no motion is detection for the duration of the time-out period, at the end the lights will turn off. The FLEX-230 offers a robust set of adjustable parameters to optimally fine-tune sensor operation and performance for the application. Please refer to the installation instruction/manual for a detailed description of functions and operation.
ORDERING INFORMATION
ceiling mounted wall mounted
www.begcontrols.com
■ Indoor: - Corridors - Common Areas
■ Outdoor: - Parking lots - Building Exterior - Sally Ports
APPLICATIONS
PRODUCT INFORMATION
■ Designed for indoor or outdoor use in protected wet, damp, or dry locations
■ Line voltage Passive Infrared motion sensor with 230° detection coverage and integral photosensor
■ 360° PIR creep zone detection. Can be enabled or disabled
■ Single circuit switching (single pole, single phase)
■ Sensor ball head rotates 180° and tilts 45°, and base rotates 10°
■ Mechanical adjustment for time-out and daylight level threshold
■ Ball head contains two motion sensors with independent range adjustment
■ Separate time-out delays can be set for each direction of motion
■ The detection coverage area can be expanded by connecting multiple sensors. Up to 5 FLEX sensors can be wired in parallel to a single circuit
■ All programmable features are remotely adjusted using our free Android and iOS apps (requires IR-ADAPTER, part number 92726 sold separately)
■ Self-test upon power up
■ LED indicators for operation feedback and troubleshooting
■ Plug base and socket construction simplifies installation and maintenance. Socket mounts on junction box cover using standard ½” trade size threaded nipple
■ Masking blinds included to limit degree of motion detection coverage
■ ROHS and REACH compliant
■ 5 years limited warranty
Voltage: 120-277 Vac, 50 /60 Hz
Contact: Dry contact
Detection: max. 65 ft/20 m acrossmax. 19 ft/ 6 m towardsmax. 13 ft/ 4 m anti-creep
Recommended Mounting Height: 8.2 ft / 2.5 m
Suitable Environment:
Dry location (non-condensing) / wet and high-humidity locations
Ambient temperature: -13 °F to 122 °F-25 °C to +50 °C
Housing: UV- and shock resistant 5VA material
Flame Rating: UL 94 5VA
Switching power: 8.3 A @ 277 VAC8.3 A @ 120 VAC
Type of contact: µ-contact, NO contact
Follow-up time: 15 sec - 16 min
Switch-on threshold:
0.19 - 185.81 fc2 - 2000 Lux
Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1).
TECHNICAL DETAILS
www.begcontrols.com
ControlsB.E.G.
1107
17 –
xxx
x
Note: Product specifications are subject to change without notice. Please consult the B.E.G. Controls web site for the most recent product specifications.
RANGE DIAGRAMWIRING DIAGRAM
3.4/
85
4.8/121 2.8/71inch/mm
DIMENSIONS DRAWING
LN
LLNC1
E165ft/20m
19ft/6m230°
131ft/40 m1
3
2
6ft/2m
Walking across1Walking towards2Anti-creep protection3