9th International Aluminium Symposium10-11 October 2019
www.alusist.com/alusist
9 th LANOITANRETNIALUMINIUM SYMPOSIUM
10 -11 OCTOBER
2019
E X P O C E N T E R
9th International Aluminium Symposium10-11 October 2019
9th International Aluminium Symposium10-11 October 2019
GENERAL INFORMATION(ALUS’2019)
9th International Aluminium Symposium will be jointly
organized by TALSAD-Turkish Aluminium Industrialists
Association, TUBITAK Marmara Research Center and
METEM-UCTEA Chamber of Metallurgical and Materials
Engineers’s Training Center on October 10-11, 2019 at Istanbul
Expo Center, Yeşilköy, Istanbul.
The symposium will take place at the same time and venue
with the ALUEXPO International Aluminium Technologies,
Machinery and Products Trade Fair, which will be organized
by the Hannover-Messe Ankiros Fair.
9th International Aluminium Symposium aims to provide
a forum to bring together aluminium technologists,
industrialists and academia.
The purpose of this symposium is to review the economical,
technological, market and scientifi c aspects of the industry,
to inform participants about the recent developments in
aluminium industry, and to form a vision for the present and
future of Turkey in the aluminium world.
SYMPOSIUM TOPICS• Primary Aluminium Production and Techniques
• Extrusion Processes
• Rolling Processes
• Casting Processes
• Additive Technologies
• Heat Treatment and Alloying
• Aluminium Recycling and Sustainability
• Industrial Applications for Aluminium and Its Alloys
• New and Advanced Aluminium Alloys
• Aluminium Markets, Pricing and Trading
• Alumina Production and Industrial Applications
SUBMISSION OF ARTICLES
• Deadline for Abstract Submission: May 17th,2019
• Deadline for Full Manuscript Submission: July 12th 2019
• Online Submission of Abstracts and Manuscripts: www.alusist.com
• Abstract Forms: Submission page should contain the abstract
(not more than 150 words, Times New Roman 12pt, single
line spacing), keywords and contact information (phone,
fax, e-mail). Abtracts should be refl ecting the essence of
the project.
• Publication of Articles in the Symposium Book: Abstracts and
Manuscripts will be Peer reviewed by the Symposium Scientifi c
Committee. The publication of articles in the symposium book
will be subject to approval of the Scientifi c Committee.
• Presentation and Poster Sessions: Authors may choose to
present articles without publication.Scientifi c Committee
may advice articles submitted for full publication for oral
and/or poster presentation.
• Commercial Presentations: Authors may submit Commercial
Publications, which are subject to certain rules and content
review as defi ned by the Organizing Committee.
ORGANIZATION COMMITTECHAIRMAN
Göksal GÜNGÖR TALSAD-Turkish AL Ind. Assoc.
MEMBERS
Derin AKERSOY ASSAN Alüminyum
Erman CAR METEM-UCTEA Ch. Metal. & Mat. Eng. Tr. Cent.
Selda KURTTEPELİ TUBITAK Marmara Research Center
Erol METİN TALSAD-Turkish AL Ind. Assoc.
Onur MEYDANOĞLU ASSAN Alüminyum
Gizem OKTAY TUBITAK Marmara Research Center
Vedat SANCAKDAR ASAŞ Alüminyum
Hüseyin SAVAŞ METEM-UCTEA Ch. Metal. & Mat. Eng. Tr. Cent
Yalçın YEŞİLOVA CANSAN Alüminyum
Metin YILMAZ ÇUHADAROĞLU
9th International Aluminium Symposium10-11 October 2019
9th International Aluminium Symposium10-11 October 2019
HIGHLIGHTS OF THEPREVIOUS SYMPOSIUM...
8th Aluminium Symposium was held at Istanbul Expo
Center, Yeşilköy / Istanbul on October 05-06, 2017 with the
partnership of Turkish Aluminium Industrialists Association,
TUBITAK Marmara Research Center and UCTEA Chamber
of Metallurgical and Materials Engineers.
ALUEXPO2017 5th Aluminium Technology Machinery and
Products Fair was organized by Hannover-Messe Ankiros
Fair Inc. concurrently with 8th Aluminium Symposium.
Concurrent organization of the fair and symposium
by the Turkish Aluminium Industrialists Association,
TUBITAK Marmara Research Center, UCTEA Chamber of
Metallurgicaland Materials Engineers and Hannover-Messe
Ankiros Fair Inc. ensures widest possible audience and has
met the expectations of all participant
FROM THE BEGINNING TO TODAY “ALUS”
The fi rst Aluminium Symposium was organized in 1994 jointly
by the Turkish Aluminium Industrialists Association, Eti
Aluminium Co. and the Chamber of Metallurgical Engineers
at the Seydişehir Eti Aluminium Plant. The second symposium
was held in collaboration with the same associations again
at Seydişehir. After the privatization of Eti Aluminium Co.,
Aluminium Symposiums have been organised in Istanbul by
the Turkish Aluminium Industrialists Association, TUBITAK
Marmara Research Center and Chamber of Metallurgical
Engineers.
In 2009, Hannover Messe Ankiros Fair Inc., the organizer
of the ALUEXPO International Aluminium Technologies,
Machinery and Products Trade Fair, joined the partnership
and the symposium was organized concurrently with the fair.
Following this partnership, the symposium continued with
full success and the presentations well received by the
visitors and participants.
INTERNATIONAL SCIENTIFIC COMMITTEMustafa ÇİĞDEM Yıldız Technical University
Derya DIŞPINAR Istanbul University - Cerrahpaşa
Murat DÜNDAR ASSAN Alüminyum
Mert EFE Middle East Technical University
Bernd FRIEDERICH RWTH Aachen University
Sebahattin GÜRMEN Istanbul Technical University
Jürgen HIRSCH Aluminium Consulting
Ali KALKANLI Middle East Technical University
Özgül KELEŞ Istanbul Technical University
Ebubekir KOÇ Fatih Sultan Mehmet Vakıf University
Ahmet TURAN Yalova University
Onuralp YÜCEL Istanbul Technical University
9th International Aluminium Symposium10-11 October 2019
9th International Aluminium Symposium10-11 October 2019
The Exclusive Hub for the Eurosian Aluminium Industry
Exhibitor Profi le
The local aluminium producers in hall 9 and the local and
international aluminium producers and suppliers to the
industry in halls 10 and 11 in Istanbul Expo Center will
showcase their products to visitors.
Suppliers to aluminium industry like:• Melting, casting, heat treatment and reheating
technology
• Pressure, die-casting machinery & equipment
• Gravity die-casting machinery & equipment
• Continues casting machinery & equipment
• Refracters and isolation materials
• Rolling mill technology
• Extrusion and drawing
• Casting, forging and extrusion moulding
• Toll, die and mould making
• Measurement and testing
• Scrap processing, recovery, reclamation and recycling
• Surface treatment
• Services, consultancy, associations and press
Aluminium producers:• Primary aluminium
• Secondary aluminium
• Semi-fi nished products like plates, profi les, ingots,
billets, etc.
• Casting products
• Aluminium systems products for architectural
applications
• Semi fi ninished products for industrial production
• Other aluminium products
319 Exhibitiors
162NATIONAL
157INTERNATIONAL
11.421Visitors
9.695NATIONAL
1.726INTERNATIONAL
An Overview of ALUEXPO 2017• Net stand area of 8.471 m²
• 319 Exhibitors from 33 countries
• 11.421 Visitors from 82 countries
REGISTRATION AND FEESFor on line registration and details please refer to the
Symposium web site (www.alusist.com).
Participants may register for the Symposium as a delegate,
author or a regular symposium participant.
Delegate Registration
Delegates Pack : Includes free high quality backpack
with abstracts and symposium program book, full set of
symposium publications, tickets for coffee and lunchs,
cocktail invitation and access ticket to the exhibition site.
Authors Registration
Authors Pack : Authors may participate to the symposium
free of charge. Authors can take symposium programme
book free of charge.
Registration for Audience
You have to make on-line registration to participate as
audient to the symposium.
9th International Aluminium Symposium
Symposium Venue: Istanbul Expo Center, Yeşilköy - Istanbul
COORDINATOR OF THE SYMPOSIUM
METEM-UCTEA Chamber of Metallurgical and Materials Engineers’s Training Center
Kocatepe Mah. Hatay Sok. No:10/9 Çankaya/ANKARA/TURKEYPhone: +90 312 425 41 60 Fax: +90 312 418 93 43
www.alusist.com [email protected]/alusist