+ All Categories
Home > Engineering > A brief information about hospital services and design By: Heersh o.faraj

A brief information about hospital services and design By: Heersh o.faraj

Date post: 07-Aug-2015
Category:
Upload: herish-ofmi
View: 64 times
Download: 8 times
Share this document with a friend
24
Hospital engineering services, planning and design Heersh O.Faraj
Transcript

Hospital engineering services, planning and design

Heersh O.Faraj

Must meet the needs of the patient it is going to serve adequately.

It must be in a size and proportions which the owners or promoters will be able to build and operate

Hospital must meet two basic fundamental needs:

Hospital engineering service

* Hospital engineering service and installation is very important component considered to be life line for a smooth functioning hospital

* The Hospital engineering service can broadly be classified as below :

Civil services

Electrical services

Bio-Medical services

Several types of services

Water requirement

Sewerage disposal

Electric supply

Electricity

STRUCTURED CABLING

LIFTS

CENTRAL PIPELINES

Services under maintenance

Physical environment

Building

Building

Elevators

Air condition & Lifts

Pumps

1-CLINIC

2-SURGERY

3-BED MANAGEMENT SERVICES

4-INTENSIVE CARE UNIT

5-maternity

6-SPECIAL TREATMENT SERVICES

7-DAY SURGERY

8-IMAGING

9-NUCLEAR MEDICINE

10-LABORATORIES

11-BLOOD BANK

12-PHARMACY

13-RADIATION

14-ARCHIVE

15-MANAGEMENT AND ADMINISTRATIVE DEPARTMENTS

16-LAUNDRY

17-MORGAN

18 -..........

19 -..........

20 -..........

GENERAL PROJECT PLANNING HEALTH CARE SHOULD BE IN SPACES LIST (Architectural requirements lists)

- Linear accelerator (LINPAC-linear accelerator) room 60-80m2. 1

- LINPAC control room 15-20m2 1

- Cobalt-60 teletherapy system 40-60m2 1

- Cobalt 60 control room 15-20m2 1

- Remote after loading device 20-40m2 1

- Automatic film processing room 10-15m2 1

- Patient simulator device 40-60m2 1

- Treatment planning system (3D) 25-50m2 1

- Dosimeter-konturmetr chamber (Physics Department) 30-50m2 1

Storage 25-35m2 1

- The examination room (s) 12-15m2 3

- Physics engineer room 12-15m2 1

- Doctors room (s) 4 12-15m2

- Management and administrative areas 100m2 1

- Consulting and waiting area 100m2 1

- Patients locker / dressing area 20-30m2 2

- WC (patient / staff) rest 30-40m2 1

- Nurse station 10-15m2 1

PLANNING DETAILED PLANNING DEPARTMENT

(Requirements for list-Feature) Radiotherapy department

Name area no

1-Reception Area 20 m2 1 2-Patient Transfer Area 10 m2 1 3-contaminated area trolley park 02 m2 2 4-clean area trolley park 02 m2 2 5-Women Dressing / Dressing 30m2 1 6-Bay locker / dressing 30m2 1 7-Chief of Anesthesia 12m2 Room 1 8-Anesthesia Physicians 12m2 Room 4 9-Anesthesia Technician 20m2 Room 1 10-Specialist Nurse Room 12 m2 1 11-Perfusionists Room 15 m2 1 12-Staff Recreation 20 m2 1 13-Housekeeping Office 10 m2 1 14-Movies Bath Room 10 m2 1 15-pump (perfusionist) Room 25 m2 1 16-Device Storage 25 m2 1 17-Supplies Warehouse 50 m2 1 18-IC Crossing Corridor 19-Operating Room 35-55m2 5 pieces 20-scrup Area 12 m2, 5 pieces 21-Clean Room 20 m2 1 22-Dirty Room 20 m2 1 23-Mobile X-ray Park Area 4 m2 1 24-Contaminated Surgical Instruments Trading Room 15 m2 1 25-Recovery Room 35 m2 1 26-Recovery Room Nurse Station 12 m2 1

Space requirements of some basic departments-

Bed: Population = A x S x 100

365 x PO

A= number of inpatient admissions/1000 population/year

S= average length of stay

PO= percentage occupancy

Bed planning-

Thank you Zor supas


Recommended