A DIVISION OF CRYOFAB, INC...From rocket science to Hollywood blockbusters, Cryocomp®, a division...

Page 1

276.728.2064 [email protected]

A DIVISION OF CRYOFAB, INC

KEEP YOUR COOL

www.CRYOCOMP.com

www.cryocomp.com • 276.728.2064 • [email protected] DIVISION OF CRYOFAB, INC.

Page 2

Welcome to Cryocomp®

KEEPING YOUR COOL IS ALL ABOUT HEAT LEAK

From rocket science to Hollywood blockbusters, Cryocomp®, a division of

Cryofab, Inc., offers the specialized cryogenic and vacuum components

you need to guarantee a reliable, efficient, long-life cryogenic system.

Our valves and accessories are designed and fabricated to the highest

standards for original equipment manufacturers involved in the fabrication and

rehabilitation of:

• Vacuum Insulated Pipe

• Tankage

• Helium Transfer Lines

• Flexible Lines

• Cryogenic Pumps

• Dewars

• and other specialized systems

AT CRYOCOMP® WE STRIVE FOR

• Quality

• Availability

• Reasonable Prices

We pride ourselves on getting you the product you need before the other

guy can even get you a quote.

[email protected] DIVISION OF CRYOFAB, INC.

Page 3

I. CRYOGENIC VALVES

• C2000 Globe, Angle and Y Pattern

- Manual and Actuated

- ½” through 2”

- Variations

• C3000 (same as C2000 but improved)

- Heat Leak for LHe Service

• C5000 (replaced C1000. CV9 style)

- Globe and Angle

• Part Number System

II. ACCESSORIZE YOUR VALVES

III. VALVE SIZING

• Flow Calculation

IV. VACUUM VALVES

• V1000 Vacuum Seal-off Valves

and Valve Operators

- ¼” through 3”

• V2000 Spring Loaded Poppets


V. CRYOGENIC BAYONETS

• Linde Style, Tube Size

- ¼” ODT to ½” ODT

• Tolerance, Pipe Size

- ½” NPS through 1½” NPS


VI. SPECIALTY EQUIPMENT

• Vapor Vent

• Manifolds

• Vapor Vent Heater

Catalog Tour

www.cryocomp.com • 276.728.2064 •


Page 4

Cryocomp® Cryogenic Valves are available in ½” through 2” pipe size weld ends. These valves are also available in different body configurations as well as manual and actuated designs. Below are examples of our manual designs:

CRYOGENIC VALVES

C2000 Valve Series – Manual Valves

Manual Valves½” Pipe

MODEL C2041-M21 MODEL C2042-M21 MODEL C2043-M21

Manual Valves1” Pipe

MODEL C2081-M21 MODEL C2082-M21 MODEL C2043-M21

Manual Valves1 ½” Pipe

MODEL C2121-M21


MODEL C2161-M21



Page 5

Cryocomp® Actuated Cryogenic Valves are available in ½” through 2” pipe size weld ends. Below are examples of our actuated valve designs:

C2000 Valve Series – Actuated Valves

Actuated Valves½” Pipe

MODEL C2041-A21 MODEL C2042-A21 MODEL C2043-A21

Actuated Valves1” Pipe

MODEL C2081-A21 MODEL C2082-A21 MODEL C2083-A21

Actuated Valves1 ½” Pipe

MODEL C2041-A21


MODEL C2041-A21

CRYOGENIC VALVES



Page 6

C3000 Liquid Helium Valve Series

Manual Valves½” Pipe

MODEL C3041-M23 MODEL C3042-M23


MODEL C3081-M23


MODEL C3041-A23 MODEL C3042-A23


MODEL C3081-A23

CRYOGENIC VALVES

Cryocomp® Liquid Helium Cryogenic Valves are available in ½” through 2” pipe size weld ends. These valves are also available in different body configurations as well as manual and actuated designs. Below you will see examples of both manual and actuated designs for the industrial helium series:



Page 7

Cryocomp® also offers small liquid helium cryogenic valves which are available in ½” through 2” pipe size weld ends. These valves are also available in different body configurations as well as manual and actuated designs. Below you will see examples of both manual and actuated designs for the small liquid helium valve series as well as an adapter kit to switch a valve from a manual valve to an actuator.

C5000 Liquid Helium Valve Series

Manual Valves½” Tube

MODEL C5041-M11 MODEL C5042-M11


MODEL C5041-A11 MODEL C5042-A11

Adapter Kit:Manual

To Actuator

C5000 ACTUATOR

ADAPTER KIT

CRYOGENIC VALVES


[email protected] DIVISION OF CRYOFA B, INC.

Page 8

Purge Port: 1 = No Port2 = Port with Pipe Plug3 = Port with Relief Valve (150 PSIG)4 = Port with Relief Valve (XXX PSIG) (specify with order)

Vacuum Jacket: 1 = Full Jacket2 = No Jacket3 = Cold Box Jacket4 = Special

Other Features: A = Flow Plug (EQ%)B = Flow Plug (Linear)X = Specify with OrderT = Gas Trap

Design Series: C2000 Series = CV3 ReplacementC3000 Series = LHE ValveC5000 Series = CV9/C1000 Replacement

Size: 04 = ½” (4/8)06 = ¾” (6/8)08 = 1” (8/8)12 = 1½” (12/8)

Body: 1 = Globe Butt Weld Ends2 = Right Angle Butt Weld Ends3 = Y Pattern Butt Weld Ends

Operation: M = ManualA = Actuated/Pneumo/NCB = Actuated/Pneumo/NOC = Actuated/Pneumo/SpecialD = Actuated Valve Assembly without ActuatorE = Actuator with SolenoidF = Actuator with Solenoid and Filter/RegulatorK= Check Valve

Other Feature (specify)JacketPurge PortOperation

Body ShapeSize (⅛”)Design Series: C2000 = Industrial Jacketed Series

C3000 = Industrial Helium SeriesC5000 = Small Helium Valves

C = All Vacuum Jacketed Style Cryogenic Valves

C0000( )-X00XModel Number:

VACUUM JACKETED STYLE CRYOGENIC VALVES

CRYOGENIC VALVES

Part Number System

P = MPTF = FPTT = TubeA = AN Male

M = Butt Weld TubeS = Socket Weld PipeB = Soc Weld TubeC = Soc Solder CopperN = Flare Tube and Nut



Page 9

ACTUATOR

ANGLEGLOBE Y-PATTERN

SOLENOID VALVE

FILTER REGULATOR

ACTUATOR with POSITIONER I-P and P-P

LIMIT SWITCHES

RELIEF VALVE

Downstream Thermal Expansion Protection

Relief Valve►

023 45 67 89 10 20 30 40 50 60

7080

90100

20

40

60

80

100

% O

F LI

FT

PERCENT OF MAX. FLOW

EQUAL PERCENTAGE

LINEAR

QUICK OPENING

10

30

50

70

90

Typical Lift Flow Curves

=►

CHARACTERIZED FLOW PLUGS

Characterized Flow Plugs

Equal Percentand Linear

ACCESSORIZE YOUR VALVES



Page 10

CV = QL CV = Flow CoefficientQL = Flow (GPM)ρ (Rho) = Density (#/cu.ft.)P1 = Upstream Press (PSIA)P2 = Downstream Press (PSIA)

ρ (Rho)

(P1-P2)(62.4)

BASIC LIQUID FLOW FORMULA

C2000 & C3000 Globe Angle Y Pattern½” 2.6 5.7 5.61” 16.3 28.6 25

1½” 31 37 422” 42.3 54 N/A

C5000 Globe Angle Y Pattern½” 1.1 2.3 N/A

CV

TABLE OF FLOW COEFFICIENTS

DENSITY TABLE FOR COMMON FLUIDS (ρ)

Water 62.4 #/cu.ft.LN2 50.4 #/cu.ft.LH2 4.4 #/cu.ft.LHe 7.8 #/cu.ft.LAr 87.4 #/cu.ft.LO2 71.2 #/cu.ft.

VALVE SIZING

Flow Calculations



Page 11

VACUUM VALVES

V1000 Series

¼” - 3” Vacuum

Seal-off Valves

V1000 SEAL-OFF VALVE V1000 SEAL-OFF VALVE WITH SIDE PORT

¼” - 3” Vacuum

Seal-off Valves and Operators

V1000 VALVE OPERATOR

2” Spring Loaded Vacuum

Seal-off Valves and Operators

V2000 SEAL-OFF VALVE V2000 VALVE OPERATOR

Cryocomp® offers two styles of vacuum valves for applications where a user requires a vacuum entry which is simple, reliable and tamper resistant.

The V1000 Vacuum Valve series is simple, inexpensive and reliable. This design ranges in size from ¼” through 3” with matching operators.

The V2000 Vacuum Valve is a larger, spring loaded valve design which has been used for many years on large vacuum spaces like MRI magnets, dewars and cold boxes. With the V2000 Vacuum Valve reliability and simplicity are the important design factors.

V2000 Series



Page 12

VACUUM VALVES

Model Number:

Special Detail Seal-off Valve or OperatorBody MaterialSize (⅛”)Design Series

V = All Vacuum Valves and Valve Operators

V0000-0-0

Seal Off Valve or Operator: 1 = Seal-off Valve2 = Valve Operator with Tube End3 = Valve Operator with ISO Flange End (add –XX for ISO size)4 = Valve Operator with ¾” Tube End

Special Detail: 0 = No Side Port1 = ⅛” FPT/TC Port2 = View Port3 = Non-reliving/Snap Ring Groove

or Plug Arrestor Accessory4 =5 =

10 =16 =25 =40 =50 =

Design Series: V1000 Series = SV8/VO8 ReplacementV2000 Series = SV7/VO7 ReplacementV3000 Series = Relief Disc

Size: 04 = ½” (4/8)06 = ¾” (6/8)88 = 1” (8/8)12 = 1-½” (12/8)16 = 2” (16/8)

Body Material: 1 = Aluminum2 = Brass/Bronze5 = Stainless Steel

ISO Flange Size

VACUUM SEAL-OFF VALVES

Part Number System



Page 13

CRYOGENIC BAYONETS

CB700 Series

Tube Size Cryogenic

Connection for Vacuum Insulated

Piping and Flex Line Applications

CB700 CRYOGENIC BAYONET

Pipe Size Cryogenic

Connection for Vacuum Insulated Piping Systems

B3000 CRYOGENIC BAYONET

Cryocomp® manufactures the CB700 tube size series and B3000 pipe size series of Cryogenic Bayonets.

The CB700 Cryogenic Bayonet design is a tube size high efficiency cryogenic connection for vacuum insulated piping and flex line applications. This series utilizes a threaded connection nut to facilitate easy connection and separation functions, a nose seal design to maximize efficiency and a silicone o-ring to assure tight sealing at cryogenic temperatures.

The B3000 Cryogenic Bayonet is a high efficiency cryogenic connection for vacuum insulated piping systems. The design utilizes an extremely close fit between the male and mating female bayonet, establishing a gas pocket between the liquid interface and the flange seal. The very small gas pocket and the thin stainless elements contribute to the high efficiency of this design. The primary seal is a silicone o-ring at the ambient flange location. The close design tolerances eliminate the necessity of a nose seal.

B3000 Series



Page 14

Length (standards): 3 = 3” Thermal Length6 = 6” Thermal Length9 = 9” Thermal Length15 = 15” Thermal Length

Function: B (or no number) = Bayonet (standard)A = VJ Cap or Plug with Pipe OutletC = VJ Cap or Plug, Blank D = NJ Cap or Plug (pressure only, no cryo)E = NJ Cap or Plug with ¼” FPT (pressure only, no cryo)P = Protective Cover (usually plastic, vented)

Example: VJ Plug, Blank for ½” x 3” Female Bayonet = CB704-5M3C VJ Cap for ½” x 6” Male Bayo with Pipe Outlet = CB704-5F6A

Size: 04 = ½” (4/8)03 = ⅜” (3/8)02 = ¼” (2/8)

Material: 5 = Stainless8 = Plastic

Gender: M = MaleF = FemaleS = Set

FunctionLength (thermal length in inches)Gender Material Size (⅛”)Design Series (all Linde Style Bayonets)

CB700-000XModel Number:

Part Number System

CB7 LINDE STYLE BAYONETS

CRYOGENIC BAYONETS



Page 15

Gender: M = MaleF = FemaleS = Set (includes male, female, seal and v-band)

Function: B = Bayonet (standard)A = VJ Cap or Plug with Pipe OutletC = VJ Cap or Plug Blank D = NJ Cap or Plug (pressure only, no cryo)E = NJ Cap or Plug with ¼” FPT (pressure only, no cryo) E-25 = Pressure Plug with KF-25 FlangeP = Protective Cover (usually plastic, vented)

Example: VJ Plug, Blank for ½” Female Bayonet = B3049-MC VJ Cap for Male Bayonet with Pipe Outlet = B3049-FA

Design Series: B3000 Series = CB300 Replacement

Size: 04 = ½” (4/8)06 = ¾” (6/8)12 = 1-½” (12/8)16= 2” (16/8)

Length (standards): 9 = 9” Thermal Length12 = 12” Thermal Length

FunctionGender Length (thermal)Size (⅛”)Design SeriesB = All Bayonets

B0000-00Model Number:

CRYOGENIC BAYONETS

STANDARD BAYONETS

Part Number System



Page 16

SPECIALTY EQUIPMENT

½" Vacuum Insulated

Liquid Level Keepfull

K2041 MALE PIPE CONNECTION / K2042 MALE BAYONET CONNECTION

H1300 Vapor Vent Heater

Vacuum Insulated Custom Manifolds

Vapor Vents

The Cryocomp® vapor vent gets rid of vapor and maintains liquid level, usually at a remote location in a piping system or on a container. The vapor vent, otherwise known as a "liquid keepfull" device, allows the boiled off gases to vent but not the liquid. Cryocomp® offers this vacuum insulated vapor vent in two versions:

• The K2041 with a ½” pipe inlet• The K2042 with a ½” tube style bayonet inlet

The pipe inlet design can be installed in any liquid nitrogen system and the bayonet design can be designed into a vacuum insulated piping system for a more efficient interface. The Cryocomp® vapor vent is a fully mechanical system requiring no electrical or pressure assistance.


Date post:	21-Jan-2021
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

A DIVISION OF CRYOFAB, INC...From rocket science to Hollywood blockbusters, Cryocomp®, a division...

Documents