A doctor’swork starts by
listening to patients
As a physician, I often heard concerns
about allergies and asthma symptoms caused
primarily by irritants in dust, dirt and pollen. These
are usually unseen by the naked eye, but nevertheless
exist all around your living space. After listening to the needs of my patients, I realized
that I could remedy the problem by developing a fabric purifier called RAYCOP to help sanitize the surfaces of where we sleep and live.
Based on scientific research, this new purifying technique was designed to apply UV rays to sanitize and clean fabric surfaces in your home such as bedding and upholstery.
Through continuous research and development, we have been able to develop a
very unique and effective product to effectively trap and help eliminate dust mite matter, pollen and dirt.
D R . S U N G J I N L E E , Founder of R AYC O P
WH
Y T
HE
RAYCOP PURIFIER W
AS C
REA
TED
WH
Y T
HE
RAYCOP PURIFIER W
AS C
REA
TED
Not a vacuum cleaner (vacuums don’t
sanitize) or an electronic gadget, you’ll find your
RAYCOP Purifier instantly useful throughout your home —
everywhere you live, eat and sleep. A quick way to purify your bed
and table linens, you’ll especially love it for fabrics that can’t just
be tossed in the wash, like upholstery, drapes even decorative pillows.
The optimized synergy of UV sanitization, vibration, suction and filtration works
to carefully sanitize even your delicate fabrics. With the RAYCOP Purifier, your
home always looks cleaner and feels fresher (without constantly doing laundry)
and your family always breathes more freely.
ESS
ENTIAL TO YOUR HO
ME
The most sacred places
in the home are your bed and couch. They’re also the likely home for dust mite, bacteria, and pollen.
House dust mite feed on human skin, and flourish in the stable environment of dwellings. Their matter is a common cause of asthma and
allergic symptoms worldwide. Therefore, removal of house dust mite matter is
a challenging task. Another microscopic intruder, bacteria is commonly found in
public places like gyms and schools, and is easily brought back home to our beds.
RAYCOP Purifier’s patented RayClean Technology®
is
uniquely designed to effectively eliminate dust mite
matter, bacteria, pollen and other common allergens
from bedding and other fabric surfaces. Now your
whole home is a fresher and cleaner environment.
WHY USE RAYCO
P
Delicate
Normal
Heavy
Power Button
Press for a
couple of seconds
Standby and
press again
Start using and
also change modes
D E L I C AT E M O D E
For delicate and lighter fabrics such
as sheets, curtains, thin blankets
N O R M A L M O D E
For blankets, decorative
pillows, and covers
H E AV Y M O D E
For sturdier fabric surfaces such
as upholstery and mattresses
The various purifying modes enable the
optimal balance between the bristle power,
suction force, and vibration speed.
Control Panel
Choose from 3 different modes by
pressing on the power button:
Function Names
Alert to Wash Dust Box Filter
Alert to Replace Micro HEPA Filter
Dust Box Lamp
Delicate
Normal
Heavy
Lock Lamp
Purifying Modes
HOW TO START
How to Use
PLEASE NOTE: The RAYCOP Purifier was designed for home fabric surfaces and is not recommended on wall to wall carpeting, wood, leather or metal.
RAYCOP Purifiers are designed to be sturdy to ensure stability and durability, but you’ll quickly see how easily your purifier glides on
the surface. Slowly glide along the surface you want to clean 2 or 3 times. Once your purifier is laid flat on the surface, the UV light will turn on.
Direct contact on the surface ensures effective cleaning so do not lift or angle your purifier.
RAYCOP was created to be used on various surfaces from heavy to delicate fabrics; the suction power was specifically calibrated to ensure there’s no damage to fabric surfaces.
Once your purifier is lifted or angled, the UV light will automatically turn off.
HO
W TO
USE RAYCOP RS2
Dust Box Filter
UV Lamp Indicator ExhaustOpening
Power Cord Rewind Button
Micro HEPA Filter Cover
Micro HEPA Filter Cover( Equipped with HEPA Filter)
UV Lamp
Target Detection Sensor
UV Lamp Grille/Frame
TargetDetection Sensor
Exhaust Opening
Power Cord
Grille Hook
Surface Brush
Pulsating Pad
UV Lamp Grille/Frame
UV Lamp Set
FunctionDisplay Panel
Power Button(Switch Modes)
Suction Width Guide
Dust Box FilterDetection Sensor
Dust BoxIndicator
UV Ray Width Approx. 9in (23cm)
Dust Box
REMINDER:
When it’s time to replace your parts,
please use genuine RAYCOP parts.
To order please visit www.raycop.com or
contact us at [email protected]
G
ETT
ING
TO KNOW RAYC
OP R
S2
End Cap
Filter
Brush
Slide the grille hooks at both ends until the green point appears to remove them.
Remove the surface brush
from the cap side.
Grille Hook
Green Point
Pull out the
dust box as
shown below.
Air dry your filter in a shaded area, do not use a
dryer. Once dry, secure the filter back into the dust box.
1
1
Remove the dust box filter by pressing the protrusions on both sides.
23
Surface Brush
For more maintenance and parts replacement
(such as: the UV-lamp & HEPA filter) information, please visit raycop.com/maintain
3
To avoid dust from scattering
into the air, submerge both the
dust box and filter in water and remove the filter from the dust box.
Note: If the filter is clogged, you may notice that the suction is weaker.
Clean the filter with a mixture of water:detergent (ratio 9:1).
2
Securely attach the dust box by
pressing it into the cleaner until
the dust box lamp goes out.
4
Detach the cap and
remove house dust or
hairs entangled in the
surface brush. If the
brush is excessively dirty,
wash it with detergent
or soap, rinse with water,
and thoroughly dry.
CLE
AN
ING YOUR RAYCO
P RS2
Dust Box Filter Detection Sensor
A safety device that prevents your purifier from operating without the dust box filter attached by using a sensor located on the
dust box attachment.
Dust Box Filter Washing Alert
If house dust accumulates on the dust box
filter, starts flashing red to inform you it’s time to wash the dust box filter.
House Dust Indicator
The house dust indicator is designed
to light up during use so you can easily
check how much dust has accumulated.
This alerts you to clean the dust box
and filter.
Lock Function
A safety function to prevent your purifier from accidentally operating by locking it
when left for about 1 minute while the power plug is in an outlet.
Micro HEPA Filter Replacement Alert
Starts flashing in red to inform you it’s time to replace the micro HEPA filter with a new one.
Motor Overheating Prevention Device
If your purifier is continuously used for 30 minutes, the motor overheating prevention
device automatically stops suction to
prevent overheating the motor. This may
occur if the dust box or filter is clogged with house dust.
Run Time Control System
You will hear 5 beeps right before your purifier automatically stops after running around 29 minutes.
Target Detection Sensor
A safety device that automatically turns off
the UV lamp when your purifier is moved away from the target. The UV lamp is automatically turned back on when your
purifier is moved close to the target again.
UV (ultraviolet light) Blocking Feature
Minimizes UV emitted to areas other than the area being cleaned.
DESIG
NED FOR SAFETY
WARNING – To reduce the risk of fire, electric shock, or injury:
� Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
� Do not use outdoors or on wet surfaces
� Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufactur-er’s recommended attachments.
� Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
� Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
� Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
All RAYCOP products are designed
with the highest safety standards.
I M P O RTA N T S A F E TY I N S T R U CT I O N S
Read all instructions before using
� Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
� Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
� Turn off all controls before unplugging.
� Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
� Always turn off this appliance before connecting or disconnecting motorized nozzle.
� Hold plug when rewinding onto cord reel.
� Do not allow plug to whip when rewinding.
� Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
� Do not use without dust box and/or filters in place.
SAVE THESE INSTRUCTIONSTo reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
UV Lamp Caution: � Direct exposure to ultraviolet
radiation can cause serious skin burns and eyes.
• Do not touch the UV lamp during or immediately after use.
• Do Not directly emit the ultraviolet light from the UV lamp towards the eyes or skin of humans and animals.
• UV-C bulbs contain mercury, which is considered hazardous waste and is subject to Federal and/or state hazardous waste regulations.
- In rare instances, (similar to standard florescent light bulbs) mercury leakage could occur if the bulb breaks and could cause birth or reproductive issues.
• Please keep the UV lamp protective tube clean.
- Inadequate and infrequent maintenance may lower the transmission of ultraviolet light.
Other Precautions: � Do not use or store heating
appliances such as stoves or heaters, nor flammable substances such as combus-tible sprays near this product.
� Do not stick knives, thumbtacks, burning ash, toner powder or other inappropriate materials.
� If you notice any abnormal noise, odors, or smoke emanating from this product, immediately remove the power plug.
• Please visit raycop.com/maintain for specific instructions on proper cleaning and maintenance practices.
This product is intended for primarily for household use on mattresses, bed covers, bedding, pillows, cushions, sofas, and other fabric products.
� Do not use for outdoor purposes or on metal, leather, wood, liquids or other non-fabric surfaces.
SAFE
TY INSTRUCTIONS
Technical Specifications
Model RS2-100A
Serial Number
Warranty Period1 year from the date of purchase(parts and additional products are not included)
Size (mm)
Weight
Power Consumption
UV-C Lamp
Vibration Pads
Surface Brush
Suction Mode
Retractable Power Cord
Air Filtration
UV Light Safety Mechanism
Motor Safety
15 x 17 x 6in (383.1 x 434.8 x 166.4mm)
Approximately 6lbs (2.77kg)
300W
11W (253.7nm)
4,600-5,000 RPM
200mm
3 Modes
3.3ft (3.8m)
Standard Filter + HEPA Filter
Two Built in Sensors for Surface Detection
Heat Detection with Automatic Cutoff Switch
EPA Company No. 92492
EPA Est. No. 92507-KOR-1
Produced For
RAYCOP North America Inc.
3875 Hopyard Road
Pleasanton, CA 94588866.872.9267
� 3 Different Suction Modes
� 2 Separate Air Filtration System
� Surface Brush to Remove Hair and Debris
� Powerful 11 Watt UV-C Lamp
� 4,600-5,000/Minute Vibration Capability
� Retractable Cord
� Cradle Included for Easy Storage
CO
MM
ITMENT TO QUALITY
R A Y C O P R S2
RAYCOP Limited One-Year Warranty
1.2.
3.
4.
RAYCOP warrants its product to be free from defects in material and
workmanship for a period of one year from the date of the original
purchase from RAYCOP or an authorized RAYCOP distributor.
Proof of purchase is required for all warranty claims.
We thank you for being a customer of RAYCOP.
This warranty does not cover damage, defects or failure caused by or resulting from accident,
external destruction, alteration, modification, abuse, misuse or misapplication of this product.Please read all the documentations carefully to ensure RAYCOP was used as intended.
The warranty period is valid one year from the date of original purchase.
Follow the instructions below.
1. Locate original sales receipt and make note of your model and serial number.
2. Call RAYCOP at 866.8RAYCOP or 866.872.9267 from
9am to 5pm M-F PST, or email us at [email protected].
3. You will be asked to provide your name, address, date of purchase,
model and serial number.
4. RAYCOP will arrange shipping boxes to be sent to your home to recover
the product. Simply follow the instructions inside the box on how to send
the device back to RAYCOP.
CO
MM
ITMENT TO QUALITY
NOTES
NOTES