A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to AAL/R 6cyl. With Joint for GSFRCAA6 ,GPRE17 &GLVW. CAV Part no: 7135-29A 6pcs Delivery Valve Washers……………………………………………5936-161 6pcs Element Barrel Locking Washers………………………………..7033-379 2pcs Air-Vent Screw Washers……………………….…..……………..NW5-17W4 1pc Cork Inspection Cover Casket…………………………………...7118-30A 2pc Camshaft Bearing Endplate………………………….……………7118-25 1pc Governor Gasket (Pneumatic Bedford)…………………………7034-968 1pc Governor Gasket (GSFRCAA6 &GLVW)…………….………….7023-794B 1pc Closure Cup. ( EFD Bedford)…………………………………….7033-527 2pc Camshaft Bearing Oil Seal…………………………………………7097-166 6pcs Base Plate Closure Plugs..…………………………………………7097-231 1pc Governor Tab Washer…………………………………………..…7118-107 1pc Lift Pump Gasket……………………………./…………………….. 7118-31 1pc Camshaft Key………………………………………………………….NK1-6 1pc Lead Seal…………………………………………………………….…5606-62 In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned.
Transcript
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to AAL/R 6cyl. With Joint for GSFRCAA6 ,GPRE17 &GLVW.
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned.
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to Type: BPE4B
CAV PART No: 7135-29B
4pcs Delivery Valve Washers…………………………………………..5339-862 4pcs Element Barrel Lock Joints……………………………………...5339-132 2pcs Air Vent Screw Joint………………………………………………5339-383
In all cases, proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
Gasket & Seal Kit for a Mechanical/ Variable Governor Fitted to N& NNL. Fuel Pumps
in all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
A Gasket Washer & Seal Kit for Reconditioning CAV Fuel Injection Pump. Fitted To BPE4A60S FERGUSON
TRACTOR. TEF20. With Back Filter KIT Part No: 7135-29D
Fuel Pump 4pcs Delivery Valve Washers……………………………………………5936-22 2pcs Fibre Air-vent Screw Washers…………………………..……....5339-132 4pcs Aluminum Element Barrel Locking Screw Washers…….…..7033-379 1pc Cork Inspection Cover Casket…………………………………...7033-24 1pc Camshaft Bearing Flange Paper Gasket (Drive End)……..…7033-175 1pc Camshaft Bearing Flange Paper Gasket (Rear End)……..….7033-176 1pc Camshaft Bearing Oil Seal…………………………………………7033-94 4pcs Base Closure Plugs………………………………………………....7033-201 1pc Key for Camshaft……………………………………………………..NK1-18 2pcs Key for Throttle & Stop Shaft………………………………….……7034-25 Filter Housing: 1pc Rubber Gasket……………………………………………………….7096-17 1pc Cork Gasket…………………………………………………………..7033-315 2pcs Filter Pad (Now Made in extra Thickness)………………..…....7097-231 1pc Control Rod Limiting Screw Washer……………………….…....7033-202 1pc Copper Inlet Adaptor Copper Washer………………………...NW5-49W4 2pcs Inlet Connection Copper Washers………………………………..5339-423 Governor Housing: 1pc Paper Gasket…………………………………………………………7034-305 2pcs Stop Shaft Felts……………………………………………………...7034-234 Excess Fuel Device: 1pc Gasket Cover Plate…………………………………………………...7043-7 1pc Lead Seal………………………………………………………………..5606-62
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned.
A Gasket & Seal Kit for a CAV Lift Pump
Type: BPF/K22 & P
PART No: 7135-29E 1pc Hand Primer……………………………………………………………ZC7264 1pc Gasket ………………………………………………………………….7010-417 2pc Valve……………………………………………………………….……7027-26 2pc Valve Spring……………………………………………………………7027-27 3pc Spring Washer………………………………………………………… 5293-57 4pc Banjo Washers…………………………………………………………NW5-43W4 1pc Spindle O-Ring…………………………………………………………5855-30B
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
Gasket & Seal Kit for a CAV NL/6 Fuel Pump. Fitted to N& NNL6 Fuel Pumps with Back Filter
CAV Part No: 7135-29F 6pcs D-Valve Joints……………..……………………………………………7097-319 6pcs D-Valve 0-Rings…………………………………………………….…..7097-45 2pcs Air Vent Joints ………………………………………………………….5339-131 1pc Inspection Joint….. ……………………………………………….…..7097-34 3pcs Filter Felt Pads………………………………………………………….7097-231 1pc Gasket for Filter Cover………………………………………….…….7097-51 1pc Gasket for Filter Support Plate……………………………………...7097-139 1pc Gasket for Base Plate………………………………………………….7097-26 1pc Gasket for Lift Pump………………….……………………………….7097-19 2pcs Gaskets for Endplate………………………..………………………..7097-30 2pcs Camshaft Oil seal………………………………………………………7097-166 1pc Camshaft Key…………………………………………………………...NK1-6 1pc Gasket for Mechanical Governor………………………………..….7023-794 1pc Gasket for Pneumatic Governor……………………..……………..7034-968
In all cases proprietary Part Numbers are quoted for reference only, and are not
intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to NNL/R 8 cylinder. With back Filters
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Hydraulic Governor
Fitted to N& NNL/R Fuel Pumps
CAV Part no: 7135-29H 1pc Gasket Pump Housing………………………………………………7095-151 1pc Gasket Sandwich Plate……………………………………………..7095-311 1pc Gasket Gear Pump…………………………………………………..7095-156 1pc Gasket Cover Plate…………………………………………………..7095-157 1pc Gasket Plunger Unit………………………………………………….7095-153 1pc Gasket Flange Gasket………………………………………………..7095-182 1pc Gasket Bearing Bracket……………………………………………..7095-481 Assortment of Washers & O-Seals necessary for the reconditioning of the unit
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Fuel Injection Pump.
Fitted to BPE4A. Perkins P4, IHC Engine Application & Others
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
I
A Gasket & Seal Kit for a DFP6 Lift Pump
Fitted to CAV AAL Fuel Pumps
Part No:7135-29M 1pc Diaphragm………..………………………………………………7092-205 1pc Gasket Lift Pump to Cambox…………………………….…….7118-31 2pc Non Return disc Valve……………………………….…………7092-256A 1pc Spring Cap………………………………………………………..7092-218 1pc Spring Priming Lever…………………………………………..7092-219 1pc Washer 0-Ring……………………………………………………5936-58K 1pc O-Ring Priming Spindle…………………………………………5855-30B 1PC Priming Spindle…………………………………………………..7092-203 1pc Operating Lever………………………………..…………..……7092-183 1pc Fulcrum Pin………………………………………………………..7092-206 1pc Lead Seal……………………………………………………………5606-62 3pcs Spring Washer …………………………………………………....5293-57 2pc Washer Banjo……………………………………………………..NW5-22W4
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to BPE6A. Perkins P6, R6, DBT Engine Application
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
Gasket & Seal Kit for a CAV N/NN4 Fuel Pump Fitted to N& NNL4. Fuel Pumps with or without Back Filter
CAV Part No: 7135-29R 4pcs D-Valve Joints…………………………………………………….…..7097-319 4pcs D –Valve O -Rings………………………………………………..……7097-45 2pcs Air Vent Joints…………………………………………………………5339-131 1pc Inspection Joint……………………………………………………...7096-54 2pcs Filter Felt Pads…………………..………….……………………..…7097-231. 1pc Gasket for Filter Cover…………………………………………...…7096-14 1pc Gasket for Filter Support Plate…………………………………....7096-17 1pc Gasket for Lift Pump………………………………………………...7097-19 1pc Gasket for Base Plate……………………………………………….7076-11 2pcs Gasket for Endplate…………………………………………………7097-30 2pcs Camshaft Oil Seal………………………………………….……….7097-166 1pc Camshaft Key………………………………………………………..NK1-6 1pc Gasket for Mechanical Governor………………………………..7023-794 1pc Gasket for Pneumatic Governor………………………………..7034-968
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
Pin & Bush Kit for a Mec/ Vari Governor Weight. Fitted to CAV Fuel Pumps
CAV Part No: 7135-29S 4pcs Bush Short…………………………………………………….…...7046-17
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to BPF3B Gardner 6 cylinder Application
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
I
A Gasket & Seal Kit for a C.A.V Fuel Pump
TYPE DP15
Part No: 7168-303
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV DPA Fuel Pump with a Mechanical Governor.
With or Without Advance Device Fitted. Part No: 7135-110
Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals, etc
For the refurbishment of the CAV DPA Fuel Pump .
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a CAV DPA Fuel Pump with a Hydraulic Governor.
With or Without Advance Device Fitted. Part No: 7135-114
Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals, etc
For the refurbishment of the CAV DPA Fuel Pump .
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for an AMAL Lift Pump
Fitted to a Gardner Engine
Part No 120-15A 1pc Diaphragm Set of 3………………………………………………120-129 1pc Gasket Lift Pump to Cambox…………………………….…….MA210 1pc Valve Seat…………………………………………………………120-124 1pc Inlet Valve Disc…………………………………………………..136-024 1pc Valve Seat Spring……………………………………………….120-286. 1pc Rubber Washer for Filter Cup…………………………………120-025 1pc Split Pin for Fulcrum Pin…………………………………..……140-012 1pc Fulcrum Pin………………………………………………………..140-010 1pc Steel Ball……………………………………………………………120-023 2pcs Inlet Valve Washers……………………………………………...120-036 1pc Washer D-Valve Cage…………………………………………….136-036 1pc Large Washer for Inlet Banjo……………………………………120-035
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
Elements & Delivery Valves for CAV & Simms Fuel Pumps . Simms Elements SPE “A” Types
85905 7.5mm Fordson Tractor & Ford Trader SPE4A/6A 75S 85904 7.0mm. Fordson Tractor (Early) SPE4A70S380. 86203 7.0mm Ford Industrial Application 86204 7.5mm Ford Industrial Application 23460 6.0mm Ford Dexta 3cyl Tractor 86537 7.5mm BMC Nuffield Tractor SPE4A75S 86205 8.0mm BMC 5.1 5.7 85136 D-Valve BMC All applications 84055 D-Valve Ford Applications 7.5mm Elements & Dexta 82002 D-Valve Ford Applications 7.0mm Elements.
CAV Elements BPE “A” S.Change Types. 7032-26A 6.0mm Ident: B57/1 Perkins P3/P4/P6 7032-83C 6.5mm Ident: BX39 Perkins R6 7032-33A 6.0mm Ident: B58/1 FE 20C. 7032-56 6.0mm Ident: BX26 David Brown Tractor 7033-359 D-Valve Perkins P3/P4/P6. FE20C David Brown 7033-361A D-Valve Perkins R6
Please Specify the Element Ident No or the Fuel pump Part Number before Ordering I
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
This End-Cap is fitted to the CAV Governor Type:
BEP/AMN80S102X Fitted to: BPE4A60S Fuel Pump
Ferguson TEF20C Application.
The kit 7034-380A is complete with the fixing screws And the small key for the control lever shaft.
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
Ferguson TEF20C Fuel injection Pump.
Type: BPE4A60S120S6341EL
Replaces: Type BPE4A60Q120S6200EL
BPE4A60Q120S6292EL BPE4A60S120S6293EL
These are Fully Reconditioned CAV Fuel Injection Pumps on a Service Exchange Basis
Fully overhauled with all new gaskets washers and Oil Seal
New Camshaft Bearings, Delivery Valves, Filter Felts, Governor Diaphragm, Governor Control Pin & Sleeve, End Cap re-bushed
with a new spindle.
In all cases proprietary Part Numbers are quoted for reference only and are not intended to imply that the parts are manufactured by the companies mentioned
C.A.V. & SIMMS Pneumatic Governor Springs
Fitted to Fuel Pumps
CAV Main Springs for Pneumatic Governors. 7033-33 IDENT YELLOW STRIPE Free Length: 115mm Application: Perkins S6, David Brown 7034-253 Ii1ENT Green Strip Free Length: 135mm. Application: Perkins P3/P4/P6 & L4 7034-306 IDENT Blue Stripe. Free Length: 122mm. Application: Ferguson TEF 20 7034-376 IDENT No Colour Marking. Free Length: 152mm Application: Perkins S6, Leyland
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a Simms Fuel Injection Pump. Part No: 506812
Fitted to SPE4A series with a GMVA & GVH Governor
Suitable for Ford Industrial: SPE4A & BMC Industrial: SPE4A Please Note: For 6 cylinder Applications: Additional Parts Are Required. Inspection Gasket Part No: 85127. + 2 extra D Valve & Barrel Locking Washers 4pcs Delivery Valve Washers……………………………………………….P82009 2pcs Air Vent Screw Washers…………………………..………………….21005 4pcs Element Barrel Locking Screw Washers……………………….….21906 2pc Camshaft Bearing Oil Seal…………………………………………….22159 1pc Copper Inlet Adaptor Copper Washer……………………………...101404 1pc Filter Capsule…………………………………………………………….82383 4pc Element Plunger Shims………………………………………………..82003 2pc Cam-box Drain Washer………………………………………………… 22186 1pc Cork Inspection Cover Casket…………………………………….....85947 1pc Lift Pump Gasket………………………………………………….….…85960 1pc Lead Seal………………………………………………………………...5606-62 1pc Governor to Pump Casing……………………………………………23343 1pc Governor Cover Joint GMVA……………………….……………...23342 1pc Governor Cover Joint GVH………………………………….……..23381 2pcs Governor Cross Shaft Joint…………………………………………23370 2pcs O-Ring Stop Shaft GVH…………………………………………….126063-7
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Fuel Injection Pump.
Fitted to SPE3A series with a GPD Governor BMC: SPE3A75S473 GPD 90A47
BMC: SPE3A75S621 GPD90A47 Part Number: 501613 Ford Dexta: SPE3A60S 593A GPD90A63 A Diaphragm is included for the FORD Dexta Ford Dexta: SPE3A60S 402 GPD90A31 3pcs Delivery Valve Washers……………………………………………….P82009 2pcs Air-Vent Screw Washers…………………………..………………….21005 3pcs Element Barrel Locking Screw Washers………………….….…...21906 2pc Camshaft Bearing Oil Seal…………………………………………….22159 1pc Copper Inlet Adaptor Copper Washer……………………………...101404 1pc Filter Capsule…………………………………………………………….82383 3pc Element Plunger Shims………………………………………….……..82003 1pc Control Rod O-Seal…………………………………………………….126064/9 1pc Damper Assembly Washer……………………………………….…….P86816 1pc Cambox Drain Washer………………………………………………… 22186 1pc Cork Inspection Cover Casket…………………………………….....23462 1pc Lift Pump Gasket………………………………………………….….…85960 1pc Lead Seal………………………………………………………………...5606-62 1pc Governor Diaphragm Ford Dexta……………………………………23484
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Fuel Injection Pump.
Fitted to SPE3A series with a GPD Governor BMC: SPE3A75S473 GPD 90A47 BMC: SPE3A75S621 GPD90A47
Ford Dexta: SPE3A60S 593A GPD90A63 Part No: 501614 Ford Dexta: SPE3A60S 402 GPD90A31 3pcs Delivery Valve Washers……………………………………………….P82009 2pcs Air-Vent Screw Washers…………………………..………………….21005 3pcs Element Barrel Locking Screw Washers………………….….…...21906 2pc Camshaft Bearing Oil Seal…………………………………………….22159 1pc Copper Inlet Adaptor Copper Washer……………………………...101404 1pc Filter Capsule…………………………………………………………….82383 3pc Element Plunger Shims………………………………………….……..82003 1pc Control Rod O-Seal…………………………………………………….126064/9 1pc Damper Assembly Washer……………………………………….…….P86816 1pc Cambox Drain Washer………………………………………………… 22186 1pc Cork Inspection Cover Casket…………………………………….....23462 1pc Lift Pump Gasket………………………………………………….….…85960 1pc Lead Seal………………………………………………………………...5606-62
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Fuel Injection Pump. Fitted to: SPE6A75S318 Fuel Pump. Ford Trader 6D Engine SPE4A75/80S Fuel Pump. BMC 5.1L & 5.8L Engine
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned.
A Gasket & Seal Kit for a Simms Fuel Injection Pump. Fitted to: SPE4A75 Fuel Pump. Fordson Tractor Engine SPE4A75S Fuel Pump. BMC Nuffield Tractor
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned.
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Minimec 4 Cylinder Fuel Injection Pump.
Part No:506800 Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals etc:
For the refurbishment of the Simms Minimec 4 cylinder Fuel Pump .
Includes both types of delivery valve washers Top sealing & Nylon.
Various applications include; Ford, BMC. David Brown Dorman & Others
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Minimec 3 Cylinder Fuel Injection Pump.
Part No: 506801 Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals etc:
For the refurbishment of the Simms Minimec 3 cylinder Fuel Pump . Includes both types of delivery valve washers Top sealing & Nylon.
Various applications include; Ford, BMC. & Others
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Minimec 6 Cylinder Fuel Injection Pump.
Part No: 506806 Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals etc:
For the refurbishment of the Simms Minimec 6 cylinder Fuel Pump . Includes both types of delivery valve washers Top sealing & Nylon.
Various applications include; Ford, BMC. Leyland, David Brown, Vauxhall
Dorman & Others
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
Various parts for a Simms SPE 3A Fuel Injection Pump.
Application Ford Dexta SPE3A60S402/593
Lift Pump…………………………………………………………….AC461-110 Diaphragm…………………………………………………………..23484 Camshaft Bearings……………………………………………… ..20084 Camshaft Oil Seal……………………………………………….....22159 ***** Inspection Cover Joint…………………………………………….23462 ***** Air Vent Screw………………………………………………………82858 Control Shaft…………………………………………………………24421 Rocker…………………………………………………………………23471 Element………………………………………………………………..23460 Delivery Valve………………………………………………………..84055 Tappet Springs……………………………………………………….85127 Set of Roller Pin & Bush 10mm…………………………………..23949 ***** These parts are included in our Gasket & Seal Kit Part No: 501614
In all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the companies mentioned
