8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

1/14

What?

A maritime design toolFor industrial design & naval architecture

In collaboration with:

Maritime Research Laboratory

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

2/14

Fold out projection surface

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

3/14

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

4/14

Naval architects

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

5/14

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

6/14

Initial concepts

Sketch

Try outImprove

Focus:Interface design

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

7/14

List of demands

Avatar

Enable user studies on board ship - Ability to have two way communication (Of ce - ship) - Capture video (360) - Capture photo (360) - Capture sound (360) - Ability to operate from a distance - Ability to record operators view User test interface ideas and evaluate concepts - Screen - Gesture - Sound Document and log user data - Video - Sound - Motion tracking - Eye tracking Practical requirements - Powered by standard 230v plug - Use standard components(Projector etc.) - Cost ef cient casing for components - Not disturb ongoing operation

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

8/14

ID Field trip

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

9/14

Zzz...

ID Field trip

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

10/14

Before During After

BriefResearchPlanning

InstallationIntroduction & TutorialObservation

ObservationInterviewsConcept developmentUser feedbackObserving

Installation

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

11/14

A window to theDesign studio

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

12/14

Modular avatar

Off the shelf components

Rapid prototyped casing

On demand product

Custom casing for standard componentsSince this unit will be produced in such a small quantity, pro-duction technique have to be taken into consideration in anearly stage. Developing a advanced technical product is ex-tremely expensive and complex. By using standard productsand have them work together in a custom designed casing.This cost could be cut signi cantly. The casing can be producedby 3D printed, laser cut and cnc milled to get a accurate t andfunction to fair price. This would also allow for simple upgradesan customization of the units.

In the example below, the unit are equipped for video confer-ence, observation, Projection and motion tracking. The projec-tor could be switched to a stereoscopic projector in order toprovide 3D visualizations.

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

13/14

360 Camera unit(Motorized)

Stabilizing projector

3D scanner(Kinect)

Motorized mirror(Re ecting projector)

Stand mount

Standard windows tablet(works as screen andCPU)

Ethernet cable (Hooks up to ships com-puter system & logs data)

Shock absorbing stand(For outdoor use)

Or...

Roof/ Wall/Floor mount(For indoor use)

Custom made casing

holding all components.(3D printed / Laser cut /CNC milled)

8/11/2019 A mobile design tool by Per-Johan Sandlund // AHO DNVGL // Fall 2013

14/14

What now?

Avatar

Selecting components - Projector, tablet camera etc.

Sketch quantitative structure - Placement of components Concept feedback from EGGS - Over all concept feedback - Non eld trip design input Concept model mockup - Cardboard model