28
W A new “steel” of doing things
W
A new “steel” of doing things
ARANIA S.A. is a family business with more than 75 years of experience in the manufacture of high precision cold rolled steel strip.
ARANIA is a company expert in integrating the needs of its customers into production and management processes, with the aim of achieving the maximum quality and reliability throughout the value chain. The auxiliary automotive sector, as well as multiple users of steel with the highest technical requirements, benefit from the excellent adaptability of ARANIA.
Excellence in products and services, and commitment to corporate
social responsibility.
VALUES:PEOPLE. Safety, Commitment, Development and Participation. ETHICAL AND TRANSPARENT. MANAGEMENT. Honesty SUSTAINABILITY. Respect for the Environment. SOCIAL CONTRIBUTION. Cooperation with our Surroundings.
STANDARDS OF BEHAVIOUR:Customer focus at all organisational levels.Excellence in our processes, products and service. Innovation and continuous improvement.Focus on international growth.
VALUES AND STANDARDS
OF BEHAVIOURVISIONMISSION
Cold rolling company leader in development and adaptability to the customer, being a reference in
service and quality.
EMPLOYEES
+ 150 people
PLANT
28.000 m2
ACTIVITY
Precision cold rolled steel
PRODUCTION
120.000 mT/year
ARANIA has one production plant, located in Amorebieta (Bizkaia)
ORGANISATION
Quality and continuous innovation mark the difference in our product.The international suitability of ARANIA is reflected in the high export rates of our production, reaching 65% of the same in recent years.
We sell our products in more than 30 countries
35%NATIONAL
65%EXPORTS
INTERNATIONALISATION
ARANIA offers steel with high and low carbon content , as well as high strength low alloy steel. Thicknesses range between 0.2 mm and 8 mm, widths between 14 mm to 800 mm and external diameters between 850 mm and 2000 mm with different surface finishes.
Most of our products are destined for the manufacture of components for the AUTOMOTIVE sector.
HIGH CARBON STEELS
HIGH STRENGH LOW ALLOY STEELS
MILD STEELS
PRODUCTS
Grade Re (N/mm2) Rm (N/mm2) Al% (L=80)
DC01 A ----- 270/390 min 28%
DC01 LC max 280 270/410 min 28%
DC01 C290 200/380 290/430 min 18%
DC01 C340 min 250 340/490 -----
DC01 C390 min 310 390/540 -----
DC01 C440 min 360 440/590 -----
DC01 C490 min 420 490/640 -----
DC01 C590 min 520 590/740 -----
DC01 C690 min 630 min 690 -----
DC03 C340 min 240 340/440 -----
DC03 C390 min 330 390/490 -----
DC03 C440 min 380 440/540 -----
DC03 C490 min 440 -----
DC03 C590 min 540 min 590 -----
DC03 A ----- 270/370 min 34%
DC04 A ----- 270/350 min 38%
DC03 LC max 240 270/370 min 34%
DC03 C290 210/355 290/390 min 22%
DC04 LC max 210 270/350 min 38%
DC04 C290 220/325 290/390 min 24%
LOW CARBON STEEL
EU standardEN 10139
Grade Re (N/mm2) Rm (N/mm2) Al% (L=80)
DC04 C340 min 240 340/440 -----
DC04 C390 min 350 390/490 -----
DC04 C440 min 400 440/540 -----
DC04 C490 min 460 490/590 -----
DC05 LC max 180 270/330 min 40%
DC07 LC max 150 270/310 min 40%
DC06 LC max 170 270/330 min 38%
DC04 C590 min 560 590/690 -----
HIGH CARBON STEEL
Re (N/mm2) Rm (N/mm2) Al% (L=80)
C10E max 345 max 430 min 26%
C15E max 360 max 450 min 25%
16MnCr5 max 420 max 550 min 21%
17Cr3 max 420 max 550 min 21%
EN 10132-2EU standard
EN 10132-3EU standard
EN 10132-4EU standard
C22E max 400 max 500 min 22% C30E max 420 max 520 min 20%
C45E max 455 max 570 min 18%
25Mn4 max 460 max 590 min 20%
C60S max 495 max 620 min 17%
C35E max 430 max 540 min 19%
C50E max 465 max 580 min 17%
25CrMo4 max 440 max 580 min 19%
C85S max 670 max 535 min 15%
C67S max 510 max 640 min 16%
C40E max 440 max 550 min 18%
C60E max 495 max 620 min 17%
C55S max 480 max 600 min 17%
C55E max 480 max 600 min 17%
34CrMo4 max 460 max 600 min 16%
C90S max 680 max 545 min 14%
C75S max 510 max 640 min 15%
42CrMo4 max 480 max 620 min 15%
C100S max 690 max 550 min 13%
51CrV4 max 550 max 700 min 13%
Grade
EU standardEN 10132
HIGH STRENGH LOW ALLOY STEEL
EU standardEN 10268
SURFACEMirror Bright Matt Rough
< 0,2 µm
< 8 micro in
< 0,6 µm
< 23 micro in
0,6 - 1,5 µm
23 – 59 micro in
> 1,5 µm
> 60 micro in
DIMENSIONSThickness
0,20 – 8,00 mm
Caliber 33 – 1
Width
≤ 800 mm
≤ 31,5”
Outside Ø
≤ 2000 mm
≤ 78”
Grade Re (N/mm2) Rm (N/mm2) Al% (L=80)
HC260 LA 260-330 350-430 min 26%
HC300 LA 300-380 380-480 min 23%
HC340 LA 340-420 410-510 min 21%
HC380 LA 380-480 440-580 min 19%
HC460 LA 460-580 510-660 min 13%
HC420 LA 420-520 470-600 min 17%
HC500 LA 500-620 550-710 min 12%
*Note: Please do not hesitate to contact us if you require information on International Standards
Extra high strength low alloy steel and Mn-B alloy steels and other specialty steels, please enquire.
SPECIALQUALITIES
Teamwork at the Commercial Department and technical assistance for customers by ARANIA enable the specific needs of each customer to be covered and oriented smoothly and effectively towards the development of new products.
SERVICES
6%OTHERS
1%TEXTILE
4%FURNITURE
3%ELECTRICAL
11%INDUSTRY
75%AUTOMOTIVE
SECTORS
ARANIA has the best facilities, guaranteeing the efficiency of the process and finished product.
MANUFACTURING
Our manufacturing plant in Amorebieta (Spain) covers 28,000 square metres
A surface area of 3000 m2 organised by a last generation automated crane. The surface storage area has a capacity of 18,000 mT, (approximately 800 coils). In addition, we have a integrated software management system running throughout the process.
RAW MATERIAL STORAGE
Descaling through immersion in HCL (hydrochloric acid) utilising a push-pull system. The integrated longitudinal slitting line at the end of the process optimises the lead time (2 steps in 1)
Maximum width: 1,500 mm
Minimum width: 800 mm
Min. thickness: 1 mm
Max. thickness: 7 mm
Maximum weight: 25 mT
PICKLING LINE
1
We have two reversible Four-Cylinder Mills, with x-ray thickness measurement and laser controlled speed. Our rolling mills are High precision in thickness tolerance, based on the perfect definition of the thickness and velocity measurement systems.
Width: 450 to 750 mm
Output thickness (min) 0.20 mm
Maximum input thickness 7.00 mm
Max exterior Ø: 1,800 mm (18.4 Kg/mm)
Maximum speed: 1,100 m/min
Width: 450 to 800 mm
Output thickness (min) 0.90 mm
Maximum input thickness 9.00 mm
Max exterior Ø: 2,000 mm (23 Kg/mm)
Maximum speed: 850 m/min
ROLLING MILLS
2
A four cylinder Mill, and integrated final gauge measurement using radioisotopes, together with the use of antioxidant thixotropic oils, and the precision surface finish working cylinders guarantee a high quality final product.
Width: 450 to 750 mm
Thickness: 0.20 to 6.00 mm
Max exterior Ø 1800 mm (18.4 Kg/mm)
Max speed: 500 m/min
SKIN PASS
Our factory has high convection annealing furnaces in a protective atmosphere of Hydrogen (H2). The high convection system and the hydrogen atmosphere give us high uniformity in the mechanical characteristics of the material, as well as optimal surface cleanliness.
No. of bases: 22
No. of furnaces: 12
No. cooling chambers: 10
Maximum 65 mT/base
ANNEALING FURNACES
CERTIFICATIONSOHSAS 18001:2007ISO 9001:2008ISO TS 16949:2009ISO 14001:2004
Our laboratory is focussed on the needs of our customers: the different product analyses that guarantee the highest quality and, of course, the fulfillment in design specification. Innovation maintains us at the leading-edge and enables us to offer technical assistance and join development with our customers.
The high quality requirements our customers demand and our commitment to develop high precision products has led us to implement internal management systems in the fields of safety, quality and the environment, backed by the following certifications achieved :
LABORATORY
We have 4 integrated longitudinal cutting lines. The automatic change of the cutting body, the detection and finishing systems of the installations enable a high quality of the final strip, combined with high cutting productivity.
No. of shears: 4
Cutting width: 14 – 1,350 mm
Thicknesses of: 0.20 to 9.00 mm
Output ext Ø: from 850 to 1,800 mm
Max speed: 300 m/min
SLITTING LINES
The packaging line is totally automated and guarantees the highest product quality, along with high productivity and safety, avoiding human handling throughout the process.
PACKAGING
ARANIA has the latest technology in logistics, handling and control of finished products. The entire process is controlled by software, which allows us to guarantee excellent agility and speed of despatch.
LOGISTIC AREA
This process results in fast lead times for deliveries to any location.
www.aratubo.com
Founded in 1997
Activity: Welded steel tubes Production: 100,000 mT/year
Employees: 180 people Plant: Júndiz (Spain)
www.araniasa.com
Founded in 1940
Activity: Rolled steel strips Production: 120,000 mT/year
Employees: 150 people Plant: Amorebieta (Spain)
OUR GROUP
www.ar-storage.com/shelving
Founded in 1992
Activity: Light load storage Production: 15,000 mT/year
Employees: 200 people2 Plants: - Galdácano (Spain)
- Bytca (Slovakia)
www.ar-storage.com/racking
Founded in 2004
Activity: Industrial storage Production: 60,000 mT/year
Employees: 180 people Plant: Tudela (Spain)
ARANIA S.A.Ctra. N-634 Km 88
48340 Euba-Amorebieta. Spain
T. +34 946 300 025F. +34 946 730 248
www.araniasa.com
