A Survey of Logic Block Architectures

For Digital Signal Processing Applications

Presentation Outline

Considerations in Logic Block DesignComputation RequirementsWhy Inefficiencies?

Representative Logic Block ArchitecturesProposedCommercial

Conclusions: What is suitable Where?

Why DSP??? The Context

Representative of computationally intensive class of applications datapath oriented and arithmetic oriented

Increasingly large use of FPGAs for DSP multimedia signal processing, communications, and much more

To study the “issues” in reconfigurable fabric design for compute intensive applications What is involved in making a fabric to accelerate multimedia reconfigurable computing possible?

Elements of a Reconfigurable Architecture Logic Block/Processing Element

Differing Grains Fine>>Coarse>>ALUs Routing Dynamic Reconfiguration

So what’s wrong with the typical FPGA? Meant to be general purpose lower

risks Toooo Flexible! Result: Efficiency Gap Higher Implementation Cost, Larger Delay,

Larger Power Consumption than ASICs Performance vs. Flexibility Tradeoff

Postponing Mapping and Silicon Re-use

Solution? See how FPGAs are Used? FPGAs are being used for “classes” of

applications Encryption, DSP, Multimedia etc.

Here lies the Key Design FPGAs for a class of applications

Application Domain Characterization Application Domain Tuning

Domain Specialization

COMPUTATION defines ARCHITECTURE Target Application Characteristics known

beforehand? Yes1. Characterize the application domain

2. Determine a balance b/w flexibilty vs efficiency

3. Tune the architecture according

Categorizing the “Computation”

Control Random Logic Implementation Datapath Processing of Multi-bit Data Conflicting Requirements???

Datapath Element Requirements

Operates on Word Slices or Bit Slices Produces multi-bit outputs Requires many smaller elements to

produce each bit output i.e. multiple small LUTs

Control Logic Requirements

Produces a single output from many single bit inputs

Benefits from large grain LUT as logic levels gets reduced

Logic Block Design: Considerations “How much” of “what kinds” of

computations to support? Tradeoff: Generality vs Specialization

How much of What? Applications benchmarking

So what do we have to support?

Datapath functionality, in particular arithmetic, is dominant in DSP.

The datapath functions have different bit-widths. DSP designs heavily use multiplexers of various

size. Thus, an efficient mapping of multiplexers should be supported.

DSP functions do contain random logic. The amount of random logic varies per design.

Some DSP designs use wide boolean functions.

DSP Building Blocks

Some techniques widely used to achieve area-speed efficient DSP implementations

Bit Serial Computations Routing Efficient Bit Level Pipelining Increases throughput even more

Digit Serial Computation Combining “Area efficiency” of bit-serial and with

“Time efficiency” of Bit-parallel

Classes of DSP-optimized FPGA Architectures

1. Architectures with Dedicated DSP Logic Homogeneous Hetrogeneous Globally Homogeneous, Locally

Heterogenous

2. Architectures of Coarser Granularity3. With DSP Specific Improvements (e.g.

Carry Chains, Input Sharing, CBS)

Some Representative Architectures

Bit-Serial FPGA with SR LUT

Bit-serial paradigm suites the existing FPGA so why not optimize the FPGA for it!

Logic block to support efficient implementation of bit-serial data path and bit-level pipelining

LUTs can be used for combinational logic as well as for Shift Registers

A Bit-Serial Adder

A Bit-Serial Adder which processes two bits at a time

Interface Block Diagram

A Bit-Serial Multiplier Cell

The Proposed Bit Serial Logic Block Architecture

4x4-input LUTs and 6 flip-flops.

The two multiplexers in front of the LUTs are targeted mainly for carry-save operations which are frequently used in bit-serial computations.

There are 18 signal inputs and 6 signal outputs, plus a clock input.

Feed-back inputs c2, c3, c4, c5 can be connected to either GND or VDD or to one of the 4 outputs d0, d1, d2, d3. Therefore, each LUT can implement any 4-input functions controlled by inputs a0, a1, a2, a3 or b0, b1, b2, b3.

Programmable switches connected to inputs a4 and b4 control the functionality of the four multiplexers at the output of LUTs. As a result, 2 LUTs can implement any 5-input functions.

The final outputs d0, d1, d2, d3 can either be the direct outputs from the multiplexers or the outputs from flip-flops. All bit-serial operators use the outputs from flip-flops; therefore the attached programmable switches are actually unnecessary. They are only present in order to implement any other logic functions other than bit-serial datapath circuits.

Two flip-flops are added (inputs c0 and c1) to implement shift registers which are frequently used in bit-serial operations.

The Modified LUT Implementing a Shift Register

Performance Results

Digit-Serial Logic Block Architecture Digit–Serial Architectures process one

digit (N=4 bits) at a time They offer area efficiency similar to bit-

serial architectures and time-efficiency close to bit-parallel architectures

N=4 bits can serve as an optimal granularity for processing larger digit sizes (N=8,16 etc)

Digit-Serial Building Blocks

A Digit-Serial Adder A Digit-Serial Unsigned Multiplier

Digit-Serial Building Blocks

A Pipelined Digit-Serial Unsigned Multiplier For Y=8 bits

Digit-Serial Signed Multiplier Blocks

Middle Stages ModuleFirst Stage Module Last Stage Module

Signed Digit-Serial Multiplier

A Digit-Serial Signed Booth’s Pipelined Multiplier with Y=8

Proposed Digit-Serial Logic Block

Detailed Structure of Digit-Serial Logic Block

The Basic Logic Module (LM)

The Structure of the LM

Table of Functions Implemented

Examples of Implementations

N=4 Unsigned Multiplier

N=4 SignedMultiplier

Two N=2 Multipliers

Bit-Level Pipelined

Area Comparison with Xilinx 4000 Series

Mixed-Grain Logic Block Architecture Exploits the adder inverting property Efficiently implements both datapath and

random logic in the same logic block design

Adder Inverting Property

Full Adder and Equations ShowingThe Inverting Property

An optimal structure derived fromthe property

LUT Bits Utilization in Datapath and Logic Modes

Structure of a Single Slice

Complete Logic Block

Modified ALU Like Functionality

Comparison Results

Comparison Results (Cont…)

Comparison Results (cont…)

Coarser ALU Like Architectures

CHESS Architecture

CHESS ALU Based Logic Block

Structure of a Switch Box

Comparison Results

Computation Field Programmable Architecture A Heterogeneous architecture with cluster

of datapath logic blocks Separate LUT Based Logic Blocks for

supporting random logic mapping Basic Logic Block called a Partial Adder

Subtraction Multiplier (PASM) Module

PASM Logic Block of CFPA

Cluster of PASM Logic Blocks

Comparison Results

Some Industry Architectures Designs

Altera APEX II Logic Element

Altera MAX II Logic Element

LE Configuration in Arithmetic Mode

LE in Random Logic Implementation

Altera Stratix Logic Element

Altera Stratix II Architecture

Stratix II Adaptive Logic Module

Stratix II ALM in Arithmetic Mode

Various Configurations in an ALM of Stratix II

Multiplier Resources in Stratix II

Structure of a DSP Block in Stratix II

XILINX Virtex II Pro Architecture

Basic Logic Element of Virtex II Pro

Dedicated Multipliers in Virtex II Pro

Processor-Programmable Logic Coupled Architecture

PiCoGA Architecture Coupled with a VLIW processor

PiCoGA Logic Block

Conclusions

Traditional general purpose FPGA inefficient for data path mapping

Logic blocks with DSP specific enhancements seem a promising solution

Coarse Grained Logic can achieve better application mapping for data path but sacrifice flexibility

Dedicated Blocks (Multipliers) increase performance but also increases cost significantly

Conclusions

PDSPs with embedded FPGA can achieve a good balance between performance and power consumption

So…Which approach is the best? No single best exists

Suitability of Approaches

Highly computationally intensive applications with large amounts of parallelism can use platform FPGAs where often large resources are required and power consumption is not an issue.

Here cost/function will be lowest

Suitability of Approaches

Field Programmable Logic based coprocessors can benefit from coarse grained blocks where most control functions are implemented by the PDSP itself

Suitability of Approaches

Higher flexibility and lower cost can be achieved with logic blocks with DSP specific enhancements but flexibility to implement control logic in an efficient manner.