15 16

Mixed-Flow Pumps

Axial-Flow Pumps

Submersible Pumps

Miscellaneous Pumps

P.23

P.24

P.25

P.27

End-Suction Pumps

Double-Suction Pumps

Multi-Stage Pumps

Specialized Pumps

P.15

P.19

P.20

P.22

End-Suction Pumps

End-Suction Pumps

Main Pumps List

CAL (Cast Iron), CAR (Stainless Steel)10bar end-suction volute pump

We call CAL and CAR the Eco-Pumps which are eco-friendly semi-ordered standard pumps applying the state of the art technology of our large-sized high-ef�ciency engineered pumps.

The big features of CAL and CAR:1) CFD (Computational Fluid Dynamics) optimized

casing design ensures smooth �uid �ow. 2) Three dimensional curved impeller optimizes

smooth �uid �ow.3) Meeting customer’s speci�cation by impeller cut.4) Excellent parts interchangeability

ApplicationsFeed / Drainage water for general industries, Feed / Drainage water / Various processes for chemical / food industries, Water intake / Distribution / Supply for water works, Water pumping, Fire-�ghting, Industrial water,Cold / Hot water circulation in district heating / cooling plants, etc.

CERSEnd-suction volute pump for heat transfer oil

Specialized for heat transfer oil. Effective air-cooled design leads to no requirement for cooling at shaft sealing or bearing to 340°C heat transfer oil.

ApplicationsDry / Agitator / Heating systems for chemical industries, Oven / Dry / Heating systems for food industries, Dry / Heating systems for general industries, etc.

up to 600 m3/h / 2,640 USgpmup to 100 m / 320 ft-10 to 80°C / -50 to 170°Fup to 1 MPa / 10 bar / 145 psi32 to 200 mm

up to 300 m3/h / 1,320 USgpmup to 98 m / 320 ftup to 340°C / 640°F32 to 100 mm

CapacityTotal HeadTemperaturePressureSize

CAM (Cast Iron), CAS (Stainless Steel)16bar end-suction volute pump

In common with CAL and CAR as CA series, CAM and CAS are totally optimized design pumps which adopt the ef�cient impeller design.

ApplicationsFeed / Drainage water for general industries, Feed / Drainage water / Various processes for chemical / food industries, Cold / Hot water circulation in district heating / cooling plants, Water intake / Distribution / Supply for water works, Water pumping, Fire-�ghting, Industrial water, etc.

up to 1,200 m3/h / 5,280 USgpmup to 150 m / 490 ft-40 to 80°C / -100 to 170°Fup to 1.6 MPa / 16 bar / 230 psi32 to 250 mm

CapacityTotal HeadTemperaturePressureSize

CapacityTotal HeadTemperatureSize

490

300

100

20

5

350200202

10 50 100 500 9001400

0.8

5

30

100

15060004000100010020

2

Hm

Hft

USgpm

Q l/sQ m3/h

490

300

100

20

5

350200202

10 50 100 500 9001500

0.8

5

30

100

15065004000100010020

2

Hm

Hft

USgpm

Q l/sQ m3/h

10

100

300

3.3 10 100

12 100 500 1000

55 200 2000 4000

5

50

100

2

Hm

Hft

USgpm

Q l/sQ m3/h50

CapacityTotal Head

Temperature

PressureSize

CEEnd-suction volute pump

A single- or two-stage end-suction volute pump. Various materials and structural designs employed to meet speci�cation requirements for a variety of applications from fresh water, chemicals and heat transfer.

ApplicationsWater intake / Distribution / Supply / Boosting / Clari�cation for water works,Various processes for chemical industries,Water pumping / Drainage for agriculture,Boiler feed pump,Heat medium circulation,Heater drain, etc.

up to 2,100 m3/h / 9,240 USgpmup to 90 m / 295 ftup to 140°C / 280°F (340°C / 640°F for heat medium)up to 1 MPa / 10 bar / 145 psi200 to 300mm

5

50

100

400

10 100 6501.2

10 40 400 2000

20 100 500 2000 10000

2

5

20

80

100

Hm H

ft

USgpm

Q l/sQ m3/h

Centerline pump foot mounted. Used as booster pump for SWRO desalination and energy recovery purpose.

ApplicationsERD booster pumps for high pressure line in RO desalination plants

up to 2,000 m3/h / 8,800 USgpmup to 70 m / 280 ftup to 80°C / 176°Fup to 8 MPa / 80 bar / 1,160 psi125 to 400 mm

CapacityTotal HeadTemperaturePressureSize

200

100

30

230

1000100 600

100 360 2000

10 30

95001500500

Hm

Hft

USgpm

Q l/sQ m3/h

80

70

50

30

10

0

CBREnd-suction volute pump for ERD booster