2
A9990360 Play-XV 4-zone Wall-dimmer • Switch, Touch & Dimming Controller for RF-wireless Receiver(s) • Each Receiver is adressable to RF-Controller • 256 levels logarithmic dimming, smoothly without any flash • Switch ON/OFF slowly without any flash • Dimming range 0.1-100% Technical Specifications: Input Voltage: 110-230VAC Operation Frequency: 868Mhz RF wirteless Range: 15-20 mtr Ta: -20° - +50° Tc: +75° Dimension L x W x H (mm): 86 x 86 x 12 Weight: 0.134 Kg Protection: IP-20 Class II Approvals: CE / FCC / RoHS 230V AC Powersupply 12V - 24V - 36V SEC 1 INPUT 12/36VDC + - + - Powersupply 12V - 24V - 36V SEC 1 INPUT 12/36VDC + - + - Powersupply 12V - 24V - 36V SEC 1 INPUT 12/36VDC + - + - Powersupply 12V - 24V - 36V SEC 1 INPUT 12/36VDC + - + - Constant Current 350mA LED fixture(s) seriel connected Max. load: 1x 8.4W@12V 1x 16.8W@24V 1x 25,2W@36V Constant Current 700mA LED fixture(s) seriel connected Max. load: 1x 8.4W@12V 1x 16.8W@24V 1x 25,2W@36V A9910035 constant voltage LED PWM dimmer A9910035 constant voltage LED PWM dimmer A9910040 350mA constant current LED PWM dimmer A9910045 700mA constant current LED PWM dimmer + + + + + + - - - - - - 1 2 3 4 INPUT 12-36VDC PRI A9915810 Play-V LED RF-Receiver RGB RGBW Powersupply 12V - 24V - 36V Constant Voltage LED fixture(s) paralel connected 4x 24W (or 2x 48W)@12V 4x 48W (or 2x 96W)@24V 4x 72W (or 2x144W)@36V Remote is turned ON Constant Voltage LED fixtures paralel connected max. total load: 8A 96W@12V 192W@24V 288W@36V Constant Voltage LED flex-strip paralel connected max. total load: 8A 96W@12V 192W@24V 288W@36V If using with 1-channel (single color) RF-Dimmers Pairing with receivers: Short push the learning key of the first RF-Receiver and immediatly touch Z1 and slide with finger over the center dim-slider The LED(s) will flash, which means that the receiver is paired with Z1 Short push the learning key of the next RF-Receiver and immediatly touch Z2 and slide with finger over the center dim-slider The LED(s) will flash, which means that the receiver is paired with Z2 Pair zone-3 and zone-4 It is possible to pair more receivers to one zone. LED technology THE ART OF LIGHTING Accessoiries 20 INDOOR RATED After pairing, touch ON/OFF switch turn ON or OFF Touch and hold 2 seconds one of the Z for 2 to switch ON or OFF If ON, touch and slide with finger to set the brightness of this zone To store a scene, touch and hold one of the 3 S-buttons 2 seconds Remote is turned OFF Learning key: short push this key, and switch ON one of the Zone buttons of the remote controll and immediatly touch and fade the slider Learning key Learning key Learning key Learning key 86 12 Dimensions in mm: 86 S1 Z1 Z2 S2 S2 Z4 Z3 L N 21 U50
