1 Audio Authority Corporation • 800-322-8346 • www.audioauthority.com March, 2006 www.audioauthority.com The Catalog of Electronics Merchandising Solutions Why Choose Cat 5 for Your Next HDTV Signal Distribution Project? SEE PAGE 12 FOR DETAILS! • Lower cost • Faster install • Superior noise rejection • Longer distances • Simplified architecture 9860 Series Advantages This ground breaking system accepts component video, composite video, digital audio and two distinct analog stereo paths which are distributed over Category 5 cable up to 1,000 feet away from the head end. Cat 5 cable is less expensive than coaxial cable, and can be installed far more quickly, thereby reducing installation costs. It is readily available in CL2 and plenum rated versions which meet most fire codes. Using the 9860 series balanced line process insures that ground loops are broken and other unwanted signals never enter the signal path. Model 9861 Cat 5 Driver Model 9869 Cat 5 Distribution Amp Model 9868 Cat 5 Adapter US & Canada: 800/322-8346
9860 Series AdvantagesThis ground breaking system accepts component video, composite video, digital audio and two distinct analog stereo paths which are distributed over Category 5 cable up to 1,000 feet away from the head end. Cat 5 cable is less expensive than coaxial cable, and can be installed far more quickly, thereby reducing installation costs. It is readily available in CL2 and plenum rated versions which meet most fire codes. Using the 9860 series balanced line process insures that ground loops are broken and other unwanted signals never enter the signal path.
Model 9861 Cat 5 Driver
Model 9869 Cat 5 Distribution Amp
Model 9868 Cat 5 Adapter
US & Canada: 800/322-8346
Buy Audio Authority Consumer Products OnLine
Audio Authority Brings It Home!Long recognized as an innovative provider of CE demonstration solutions, Audio Authority has applied their vast experience, knowledge and skills developed in the commercial arena to the Residential Custom Installation market. The results speak for themselves with the introduction of the 1100 Series of whole house, high definition signal control and distribution. The 1100 Series provides true matrix distribution and control of up to six high definition sources, with delivery out to as many as thirty-six video display locations, all over CAT5 cable. Additional information on the 1100 Series and our many other custom installation tools is available at www.audioauthority.com.
Browse all of Audio Authority’s consumer oriented distribution amps, switchers, and signal converters online, including our new line of HDMI and DVI products. Audio Authority is the source for problem-solving tools that help you get the job done.
Our Company2-3 About Audio Authority
Access Switching4 Example Systems–Home Theater4-5 AccessEZ Control Panels and
Interface Options6 About the Access™ Demonstration
Network7 AccessEZ™ Switch Modules8 Car Audio Switch Modules9 Car Audio Accessories
Switching Accessories10 Power Supplies10 Car Audio Accessories10 Expanders and Other Accessories11 Product Select Buttons
HD Signal Distribution12 Cat 5 HDTV Distribution Systems13 Cable Length Compensating Amps14 HDTV Signal Distribution Amps
How to Order15 Order Info and Terms of Sale
Featured Products16 Special Features
1. Expert Advice and ConsultationSince 1976, Audio Authority has provided innovative merchandising tools and demonstration solutions to the consumer electronics trade. Our customers range from national mass merchandisers and prominent manufacturers to electronics specialty stores of all types to individual consumers, all around the world. The unique combination of our thoughtfully designed products along with our experienced, knowledgeable staff of retail veterans insures that your merchandising goals are met in a timely, professional fashion.
2. The Industry’s Best WarrantyTalk and vague promises are little help when you are experiencing problems. We understand that solving the problem is the most important goal when a service situation arises. Our 5-year Guaranteed Replacement Warranty addresses product failures frankly and professionally by promising immediate replacement of any failed assembly as the first priority through a simple exchange program. After all, if our product is not functioning properly, regardless of the reason, your ability to demonstrate and sell your product is hampered. It is in our mutual best interest to do everything we can to fix the situation so that you can get back to your business of selling merchandise.
3. Unlimited Telephone SupportFree technical support is available for all Audio Authority products, no matter how old, through our toll free telephone number in the US and Canada at 800/322-8346, or direct at 859/233-4599. We also respond promptly to e-mail ([email protected]) or facsimile requests at 859/233-4510. Should you experience problems or frustration with any of our products, we need to know about it. During business hours, we answer our phone system with “live”, experienced people who can assist you should there be a problem or simply a question.
4. Factory Installation ServicesAudio Authority can provide experienced professional installers who will perform the tasks necessary to insure a successful installation in your store. If you choose our product loading service, you can receive a fully loaded and operational display direct from the factory. We also have good working relationships with several national service organizations capable of providing maintenance and troubleshooting as well as complete product rotation.
5. Instant Information OnlineA wealth of technical information is a click away on our website. If you need product manuals, current wiring diagrams, product specifications or even merchandising ideas, just go to http://www.audioauthority.com to find high-resolution documents in PDF format. You can easily find the document you are looking for using the “Site Search” feature. Check our site often because we are constantly adding new information.
Contentsgreat reasons to make Audio Authority your merchandising partner:Six
6. 30 Years and Still GrowingSince 1976 Audio Authority has been growing to meet the changing needs of our cutomers and our community. During the last two years, our company has made substantial investments in new machinery to meet higher output requirements, especially with new technology based products. We have made the necessary investments to meet new “green” compliance standards and are rapidly transitioning to meet our goal to comply with the new Reduction of Hazardous Substances standard. RoHS compliance builds on our long-standing efforts to recycle waste products responsibly.
We have invested heavily in new product development featuring the latest technology that will revolutionize and simplify HDTV signal distribution in residential and commercial applications. We have formed new partnerships with various parties to expand our resources. We have formed many new customer relationships as well in several new business channels thereby expanding our knowledge base.Recognizing some of the inequities in our world today, we have expanded our charitable giving locally not only at the corporate level but also with new charity programs initiated by our employees who wish to give back a portion of their earnings to local organizations through dollar matching programs sponsored by our company.
Interface Options!Whether your customers will be led through the selling process by a trained salesperson, or allowed to explore the products on their own, AccessEZ™ can be tailored to your specific home theater needs. We offer a variety of control panels, IR remote control, and customer friendly Product Select Buttons next to each product. The patented Access architecture allows multiple combinations of control interfaces in one system!
Model 906 (4.25” X 6”)
Perfect for single product group applications such as an in-wall speaker display, DVD wall, car audio subwoofer room, or a home theater speaker package demonstrator, the Model 906 makes it simple to control any single group in an Access System. Turn the knob to select products, and use the Compare Previous button to compare two selections. Multiple 906 Control Panels can be used to control
different groups in an integrated system. Use Model 996 Product Indicator LEDs to clearly show selected products.
Single Product Group Control Panel
Product Select ButtonsOnly Access combines easy-to-use buttons at the merchandise location with the advanced demonstration capabilities of a control panel – all in the same system (US Patents 5,422,631 and 5,646,602). The big round Model 999 is a real attention-getter, and comes in blue, red and green. When buttons are not needed, use Model 996 indicator LEDs to show which products are selected.
Model 999B Model 999R Model 996
Example System: Home Theater Speakers – Mix and MatchUsing this system, switch up to eight speakers or speaker pairs in each speaker group. Choose any front, any center, any rear, any rear center, and any sub. A dedicated DVD player and receiver drive the speakers. Capacity can be expanded by adding modules.
Model 932 8 Left Front
Model 932 8 Left Rear
Model 932 8 Center
Dedicated Source, Home Theater Receiver (and TV)
Model 932 8 Right Front
Model 932 8 Right Rear
Model 922 8 Subwoofers
Select speakers using AccessPCHT touchscreen
software and/or product select buttons. (Model 9A02, see p.5)
Example System: Home Theater Speaker PackagesSwitch up to eight speaker packages, each consisting of front, center and rear speakers, with a powered subwoofer. The Model 906 Control Panel provides the ideal level of control for this simple switching application. Product select buttons could also be added to this system.
The 903 offers powerful selling tools like one-touch A/B comparison, long-term system memory, and many security features which give you complete control of your home audio or car audio demonstration area. The IR remote lets you take all the advantages of a centralized control panel with you wherever you need them. Even if your display uses a button next to each product for intuitive customer appeal, your sales staff will find the additional capabilities of an Access control panel essential for persuasive demonstrations.
Model 903 Features:• Capacity for 8 Product Groups.
• Memory for 100+ systems with accidental erasure protection.
• Multi-level security with Control Panel or Product Group lockout.
• Self-diagnostic routine.
• Compact, full function IR remote (optional).
Get a Remote for Each Sales Person!Model 905 (2.5” X 5.5”)
The handy 905 IR remote lets you take the selling tools of the 903 Control Panel with you everywhere in the showroom. Product selection, A/B comparisons and more.
Home Theater Touchscreen DemonstrationModel 9A02 (1024 X 768)
configuration). Options such as brand and model, product info, item/total price, timeout to default system, and the Q & A section can be turned on or off as desired. One Model 970 Serial Interface module is required in order to communicate with the Access™ Demonstration Network. AccessPCHT requires an IBM compatible computer, 233 MHz or greater, with two RS-232 ports, and Windows 95™ or later plus a touchscreen monitor (CPU and monitor not included).
AccessPCHT™ wraps a versatile, informative software interface into an elegant one-screen solution for demonstrating home theater. Customers and sales staff will all find it very user-friendly. Up to eight product groups are available including Source, Receiver, Front Speakers, Center Speakers, Rear Speakers, Front Effects Speakers, Rear Center Speakers, and Subwoofers. The system can be customized, eliminating product groups which may not be merchandised in a particular display (see page 8 for a speakers-only
Access Control Panels
Infrared InterfaceModel 971 (5.25” X 5.25”)
A vital link in automated demonstrations, this module can be programmed to start tracks and control the volume of CD or DVD players. Works with a control panel or individual buttons. Custom software and product IR codes required.
Control Any Access System with a PC!Model 970 RS-232 Serial Interface (5.25” X 5.25”)
Allows two-way communication between PC interface and the Access system. Custom programming charges may apply.
The best solution for demonstrating and selling today’s sophisticated audio components and multichannel sound systems.
Demonstrating today’s complex audio products using yesterday’s switching is exasperating. AccessEZ means fewer pieces to the home theater puzzle. Every AccessEZ module is a self-contained unit, designed for a specific component type – everything you need in one package, instead of a patchwork of circuit boards. Not only is the size more convenient, these all-in-one units are actually less expensive than purchasing separate modules!
AccessEZ modules can be combined to create a complex switching system including sources, receivers and speakers, or a single module can be used to demonstrate a particular product group, such as receivers, using a dedicated source and speakers.Installation is a snap with color-coded, gold plated RCA jacks, removable high-level terminals and instructions printed right on the steel case. Choose our easy to use product select buttons, one of the powerful control panels, a PC touchscreen, an IR remote control, or a combination of interfaces that suits your selling technique. Give us a call and we will help you get started on the ideal showroom for you.
Integrated SystemThe Access system incorporates main modules for every major product group in the home theater mix – AV sources, home theater receivers, speakers, subwoofers, and HDTV displays. This configuration provides switching capability for multiple products in each category, and video distribution for HDTVs. Each module has the capacity for four products, (or eight in the case of speakers).
Channel FlexibilitySince the speakers are switched by mono modules, the system may be set up for any number of speaker channels. A 5.1 channel system is shown here, with four HD video displays. Expanding the system is easy – just add more modules in the category you wish to expand. Making a simpler system is just as easy – just replace the switch module with a dedicated component. For example, if you wish to use one source for the whole system, replace the 954 module with a dedicated DVD player or satellite receiver.
Switches 4 DVD players, VCRs, or DSS receivers. Five channels of output switched on one module: left/right audio, coaxial digital audio and composite video. It’s easy to add channels such as component video–just slide an Access expansion module onto the EZ docking port.
Component Video and Digital Audio SourcesModel 954 (5” X 6.5”)
Show your customers the real difference between standard definition, and the brilliance of HDTV. The Model 954 will allow your component sources to show their true colors, not to mention your choice of optical or coax connections for digital audio.
Home Theater ReceiversModel 947 (5” X 13”)
Switches 4 home theater receivers including analog audio, digital audio, composite video in and out, sub in and out, and five channels of high-level output. Like all AccessEZ modules, the Model 947 features gold-plated, color coded jacks that are easy to hook up, and maintain long-term signal integrity. EZ high-level terminals are removable for fast installation. You can add more switching channels to the 947 (such as component video) by using EZ expansion modules.
Low-Level Subwoofers and Stereo SourcesModel 922 (5” X 5”)
Switches 4 stereo or mono subs, in an integrated demonstration system. The Model 922 can also demonstrate low-level stereo sources or car audio head units. High current car amplifiers (over 200 watts RMS) should be demonstrated using a 922 for the low level input, and a 949X High Current Amp Expander to switch the output singals.
Computer SpeakersModel 934 (5” X 6.5”)
Use the powerful AccessEZ™ System platform to demonstrate multimedia speakers. Works with product select buttons or a control panel such as the Model 906. One 805-021 power pack required for each system (not included).
SpeakersModel 932 (5” X 6.5”)
The Model 932 makes demonstrating multi-channel surround speaker systems EZ by locating switching capability close to the merchandise and dramatically reducing installation costs. Each 932 handles up to 8 speakers in one channel. Add 932 modules for capacities of 16, 24, or more. This modular approach provides an unlimited number of audio channels and speakers. The AutoDamping circuit improves showroom acoustics by eliminating sympathetic vibration.
Amplifiers, Receivers andCar Head UnitsModel 942 (5” X 7”)
Provides low-level 2-channel input and high-level 2-channel output switching for amplifiers or receivers less than 200 Watts RMS. Amps may be bypassed when the bypass feature is on. May also be used for head units with 2-channel low-level and 2-channel high-level output.
Connect Head Units with any output configuration to this all-in-one module. Model 910 switches low-level and high-level audio, as well as DC power – all on one module, so you don’t need to add expanders. The 910 module is designed specifically for groups of 4, but can be divided in half to accommodate a 2-up or 6-up marketing approach.
Car Audio Equalizers or SACD and DVD-AudioModel 958 (5” X 8.5”)
Connect car equalizers or processors to this all-in-one module. It switches two-channel input and up to six-channel output on one module. This module is also ideal for demonstrating Super Audio Compact Disc and DVD-Audio systems. Call us for details.
High Current Speaker Module Model 939 (6.5” X 11”)
Each Model 939 High Current Speaker Module is designed to merchandise up to eight speakers in one channel. Stereo applications will require two 939 modules. The 939 installs, operates and performs like its little brother - the Model 932 Speaker Module – while providing a high current signal pathway for ear splitting demonstrations. Like the 932, the modular approach of the 939 provides for an unlimited number of audio channels and speakers.
High Current Amplifier Expander ModuleModel 949X (6” X 9.75”)
The Model 949X is designed to allow the demonstration of today’s higher current amplifiers. It may be combined with our Model 922 Low Level Module for both low and high-level amplifier signal pathways or added to our Model 942 Amplifier Module to significantly improve the 942’s high level output performance. Installation of the 949X is a breeze with the exclusive AccessEZ docking port design. If space in your display is a concern, the design of the 949X allows you to locate the module remotely.
• Extra heavy-duty relays handle amplifiers producing up to 2,500 watts RMS at 4 ohms• 1/2 inch PC board traces designed for high current applications• Heavy duty board-soldered terminal blocks insure maximum signal integrity• 10AWG speaker wire compatible• 2 channel speaker-level outputs (four amplifier positions)
High Current Speaker and Amp Modules
Speakers or High-Level Head UnitsModel 940 (5” X 5”)
For switching up to four speaker pairs, the 940 may be a cost-effective solution. The 940 can also demonstrate four high-level car audio head units.
The 9A42 Interface is a multi-purpose accessory that simplifies amplifier sharing and multi-channel operation in an AccessEZ Car Audio Demonstration System. It provides a convenient connection point for all DC and signal wiring of any 2, 4, or 6 channel amplifier. Its flexible design allows you to quickly and simply adapt your display to meet rapidly changing merchandising demands.
Configurable Amp Sharing InterfaceModel 9A42 (9.75” X 4”)
Dedicated Crossover Model 9A80 (3.5” X 5”)
Model 9A80 provides an adjustable frequency, 2-in / 6-out crossover that can be concealed inside your display, thereby eliminating the need for a processor product group, or a dedicated component processor.
CD Changers and Antenna DistributionModel 975 (5” X 2”)
The compact Model 975A now provides a convenient way to distribute AM as well as FM radio signal to all of your head units, and a way to distribute RF signals from changer units. Ask about our RF expansion kits.
Managed DC Power DistributionThe Access power network offers three different power modes. You can power only those components currently playing to conserve power, or you can leave all components in the display on at all times, for instantaneous signal switching. This is the best mode for product comparisons, but when that is not possible, our exclusive power memory mode allows you to power up to 3 units in each product group so that instantaneous comparisons are possible. Remember, your power mode choice should include consideration of your DC power supply’s capacity.
Power for EQs & ChangersModel 915X (5” X 2.5”)
Use the Model 915X for DC distribution to head units, changers and passive EQs. 10 amp circuit breaker.
Power for AmplifiersModel 916X (5” X 4.25”)
The Model 916X distributes DC Power for 4 car audio amplifiers. Each module has its own 40 amp circuit breaker to protect your merchandise.
Made up of 20A modules, the 978 is designed to continue operating even if a module fails. Two 978-100s can be
used in the same display for a whopping 200 amperes. A green light shows every installed and operating module, so you can be sure of normal operation at a glance. Overheat is indicated by a red light, and also by an audible tone. Car audio stiffening capacitors can be used if even more output surge capacity is desired. Model 978-60 is the 60 amp version.
Low-Level Expander 920X Adds two low-level channels. (5” X 2.5”)
System AccessoriesPrevent Blue-ScreenModel 986 provides automatic composite video bypass to prevent blank TV screen when a receiver is selected which has no video in/out. Can also be used to patch through a default video source in systems including audio/video and audio-only sources. For AccessEZ. (5” X 2.5”)
System Module The 980EZ provides the connection point for 903 and 4904 control panels, and DC system power. It performs vital system tasks such as SilenTouch™. One 980EZ is required for every AccessEZ System. (5” X 5.25”)
Model 980EZ
High-Level Expander 940X Adds two high-level channels. (5” X 2.5”)
Speaker-Level Expander (8 positions)932X adds one speaker-level channel to 932. (5” X 3”)
Audio/Video Expander 950X adds two audio channels and a composite video channel. (5” X 2.5”)
Y Pb Pr Expander 953X adds a set of three component video channels. (5” X 2.75”)
System Bus & Speaker Bus CablesAccess and DirectSelect
EZ System Bus w/4-pin connector 2 ft ..................................... 802-307EZ Speaker Bus w/4-pin connector 2 ft .................................... 802-186EZ System Bus Extension w/2 connectors, 20 ft ...................... 802-323EZ Speaker Bus Extension w/2 connectors, 20 ft ..................... 802-309Access™ System Bus extension w/2 connectors, 20 ft .............. 802-193Access™ to AccessEZ™ adapter System Bus Cable ................... 802-319
Switching Accessories
Control Panel Accessories
Control Panel EnclosureModel 989
The 989-1 provides for easy shelf mounting of 903 control panels. Model 989-2 accommodates 906, and 988 control panels.
External Infrared ReceiverModel 990A
Ceiling Mount, omni-directional remote receiver used to extend 905 remote’s range.
Car Audio Accessories
Extension Harness for Model 910Model 998 allows 910 to be split into 2 separate modules for greater placement flexibility.
DC EliminatorModel 981 is an in-line RCA device designed to eliminate DC offset present in some products. One 981 is required per two-channel device.
Low-Level Isolator TransformerModel 982AUsed to eliminate hum by breaking the ground path between heads or EQs and amplifiers.
50A Model 572-008The Astron RSA-50A is a 50 Amp linear DC power supply. City of Los Angeles approved.
35A Model 572-007The Astron® RSA-35A is a linear DC Power supply, rated at 35 Amps. City of Los Angeles approved.
10A Samlex Model 572-005Samlex® 10 Amp linear DC Power Supply.
3A UL Model 805-016Our supply of choice for Home Audio and Home Theater Access systems, the 805-016 provides 3 Amps of DC power, and is approved by Underwriters Laboratory.
Small System Power Pack 805-021Provides system power for home audio systems which do not include a 903 Control Panel (use 805-016 for 903 systems). Plugs into the 980 or 988 system module.
Model 978 (11” X 7” X 14”)
100A Switching Supply Designed Specifically for Car Audio Displays
Signal Expansion ModulesAccess expanders can be used to add channels to Access, AccessEZ, and DirectSelect modules. Expanders add 4 positions except where noted.
The DirectSelect™ Series is unsurpassed in its unique balance of useful features and cost-effectiveness.
The DirectSelect™ series is perfect for simple displays which can be operated by individual selection buttons. Each module can be used as a stand-alone demonstrator inside a store fixture, or more complex demonstration systems can be made by combining source, amp and speaker modules. Product capacity can be increased in increments of four by adding modules.
If additional channels are required, Access expansioin modules (see page 10) may be used with DirectSelect modules. One system power pack required for each system (Model 805-021). One product select button is required for each active position. PSBs are available in red, blue or green.
AV SourcesModel 2955 (4.25” X 6.5”)
Switches the composite video and stereo analog audio of 4 sources such as VCRs, DVDs, or DSS units either independently, with a dedicated receiver, speakers and monitor, or combined with other DirectSelect modules to form an integrated demonstration system.
Stereo Amps or ReceiversModel 2957 (4.25” X 6.5”)
Switches 4 two-channel receivers or amplifiers either independently, with a dedicated source, speakers and monitor, or combined with other DirectSelect modules to form an integrated demonstration system.
Headphone Demo and Volume ControlModel 2959 (4” X 5”)
Model 2959 controls volume and demonstrates up to 8 headphones. Model 2958 (not shown) is a volume conrol only.
Stereo SourcesModel 2952 (4.25” X 6.5”)
Switches the analog stereo audio of 4 sources such as CD players, MiniDisc players, or tape decks either independently, with a dedicated receiver, speakers and monitor, or combined with other DirectSelect modules to form an integrated demonstration system.
SpeakersModel 2953 (4.25” X 3.5”)
Switches 4 speaker pairs. Includes AutoDamping™ which shorts unselected speakers to ground, eliminating sympathetic vibration. Will allow up to two speaker pairs to play at once.
Computer SpeakersModel 2956 (4.25” X 3.5”)
Select multimedia speakers with buttons next to each product.
DC Power Distribution ModuleModel 2994
Power distribution for car audio applications.
High Level Car Head UnitsModel 2957 (4.25” X 6.5”)
Ideal for very small systems, this module switches 4 two-channel high level head units.
Default TimerModel 2981 (4.25” X 3.5”)
With instructions right on the module, it’s easy to use the 2981 to return your display to a default selection in any product group. Time-out settings range from 1 minute to 5 minutes.
Cat 5 Signal Distribution for Retail Showrooms 9860 Series
Cat 5 Signal Distribution for Separate Destinations 9870 Series
The 9870 Series incorporates the key signal paths necessary for effective audio and video entertainment, plus an IR pathway for easy remote control of AV components. All these signals are carried over just two inexpensive, easy to install Cat 5 cables to each Wallplate. Each Driver feeds two Wallplates, and expanding capacity is as easy as adding more Driver modules. The 9878 Wallplate is easy to install in a standard dual-gang electrical box. Its components extend only one inch behind the stainless steel plate surface. In addition
to the audio and video signals, each durable, stainless steel Wallplate offers an antenna pass-through jack (RF cable must be added separately) and an IR jack. The IR jack provides a convenient pathway for a third party IR remote distribution network over the Cat 5 pathway. IR receiver and emitter equipment is not included.The 9870 Series delivers pristine high definition video signal with astounding clarity and color fidelity up to 1,000 feet from the source. Due to its balanced line technology, the 9870 Series provides superior ground isolation, preventing hum bars and other artifacts associated with ground loops.It’s easy to expand a 9870 System to serve multiple Wallplates. Simply stack additional 9871 Drivers using our Kit 46 stacking system, or interconnect by using RCA cables.
Component video, composite video, analog audio (two distinct stereo paths) and digital audio are included in its three strands of Cat 5 cable for each run. A Cat 5 Driver (Model 9861) converts and sends RCA signals over Cat 5e/6 cable, and one of two units can be used to adapt the Cat 5 signal back to RCA format. Total distance from head end to last amplifier can be up to 1,000 feet. Up to ten 9869 amps can operate in one Cat 5 run. Each Model 9861 Driver can drive two 9869 bus runs.
9860 Facts• Ultra high bandwidth • Adjustable cable length
compensation• Superior noise rejection• Component video• Composite video• Digital audio (coaxial)• Two distinct stereo
analog pathways (one for each video pathway)
Model 9861 Cat 5 DriverTwo Cat 5 bus paths from one RCA source input. Each bus path can drive up to ten 9869 distribution amps. To expand head end capacity, multiple 9861 Drivers may be stacked together.
Model 9869 Distribution AmpAdapts Cat 5 signals to their original RCA format feeding four HDTV displays. Adjustable cable length compensation ensures excellent signal strength, clarity and color up to 1,000 feet. Cat 5 bus outputs feed more amplifiers down a bus chain.
Model 9868 AdapterAdapts Cat 5 signals to their original RCA format for one TV or an RCA bus distribution network. Cable length compensation compensates for up to 1,000 feet of Category 5 cable.
Model 9861 (4.8” X 8.8”) Model 9868 (3.1” X 8.8”) Model 9869 (7.1” X 8.8”)
Model 9871 Driver (3.5” X 9” X 1”)
Model 9878 Wallplate (4.75” X 4.75” X 1”)
9870 Facts• Up to 1080p component video• Coaxial digital and stereo analog audio• Infrared remote jack for IR pathway• Wallplate powered through Cat 5 cable• Antenna pass-through jack
This diagram shows basic audio/video signal flow in a medium sized installation. Two or more Drivers may be “stacked” to increase capacity. The RCA bus output may be used to feed HDTV signals to a local video display and/or sound system. Download the Installation Manual for details.
9870 Signal Flow
1269 Audio and Video Signals
• ATSC or NTSC RF signals• Component video• Composite video• Digital audio• Stereo analog audio
(Two distinct analog pathways, one for each vido pathway)
1269-4 4-foot amplifier section; distributes audio and video signal to four video displays.
1269B Blank section (duct only, no end caps) covers all wires between amplifier sections.
1269C Corner piece for inside or outside 90-degree corners.
1269E End cap with conduit knock-outs for source connections and power supply.
9861 Driver with coaxial inputs (RCA connectors) and two Cat 5 output pathways
The 1269 signal distribution system encloses our proven Cat 5 signal distribution know-how inside tough and attractive steel ducts. Use the modular sections, corners and end pieces to build a custom solution that not only includes our industry standard 9860 series technology, but incorporates RF signal distribution as well. Component video, composite video, analog audio (two distinct stereo paths) and digital audio are included in its three strands of Cat 5
System Components
Detail of amplifier section (1269-4)
A Complete Cat 5 Solution for Showroom Signal Distribution• Integrates with 9860 Series• Helps prevent ground loops• Cat 5e or Cat 6 Bus• Tough steel enclosures• 1.5 in. x 8 in. profile
cable for each run. A Cat 5 Driver (Model 9861) converts and sends RCA signals over Cat 5e/6 cable, then each 1269-4 adapts the Cat 5 signal back to RCA format for connection to HDTV displays. Total distance from head end to last amplifier can be up to 1,000 feet. Up to ten 1269 amp sections can operate in one Cat 5 run. Each Model 9861 can drive two 1269 bus runs.
• HD Component Video • Coax Digital Audio• Optical Digital Audio (Input)
Component Video and Digital AudioThe Model 985DTV Component Video Distribution Amp provides pristine video quality and digital audio to multiple monitors. Use either optical (TosLink) or coax (RCA) connections for the digital audio input signal; outputs are coaxial. The self-terminating bus allows multiple 985DTV modules to be chained together, providing component video signal to 4, 8, 12 or any number of monitors from a single source.
Component Video & Every Flavor of AudioComponent video and an analog stereo audio path are available for HDTVs, plus auto-converting digital audio ports for home theater and HTIB systems. Whether your input is optical or coaxial, the digital audio output is automatically converted so both formats are always available.
• Ultra High Bandwidth Component Video
• Analog Audio • Coax Digital Audio• Optical Digital Audio
Model 985DTO (6” X 8.5”)
HDTV Signal Distribution
Multi-mode Distribution Amplifier
Model 985U or
Model 985UF (4.25” X 7.75”)
• HD Component Video • Composite Video• Digital Audio (Coax)• Stereo Analog Audio
Either connect HD component video and stereo analog audio to your TVs, or use the digital audio output for a complete theater sound receiver/speaker system. Each 985U faithfully distributes your best quality Audio/Video signal to four HDTVs or video monitors. The self terminated, thru-bus design makes installation simple. Use multiple 985U modules to distribute the same high quality source signal to all your component or composite video TVs. Also available with screw-on bus terminals (985UF).
Composite AV Distribution• Composite video stereo audio signal • 1 input x 8 output; cascadeable • Self terminating bus • Ground isolation switch
Model 9851 or 9851F (9-Channel Distribution Amp) (6.5” X 8.75”)
Model 9850 or 9850F (7-Channel Distribution Amp) (6.5” X 7.5”)
HDTV Distribution with Cable Length Compensation
• Bandwidth over 120MHz for maximum clarity • Adjustable cable length compensation• Ground isolation switch • Two bus connection choices: RCA or F-connectors • Component and composite video • Digital and analog audio • Two pairs of analog audio channels–one for each
video source (9851 only)
A buffered bus and special cable length compensation circuitry eliminate bandwidth losses associated with long coaxial cable runs, allowing bus cable runs of up to 500 feet. The excellent isolation properties prevent other signal noise problems which degrade picture quality. The 9850’s 7-channel wide architecture enables simultaneous distribution of digital audio, analog audio, composite video and HD component video. Model 9851 has an additional stereo pair of channels so that one amplifier can provide two separate audio/video feeds directly to each TV.
Payment TermsVISA, Mastercard, and American Express.Also C.O.D., check, or bank wire. Custom displays and fixtures require deposit with order.
QuantityNo minimum order requirements.
AvailabilityTypically two to four weeks for standard items. Call for specific delivery quote.
Sales TaxSome states require payment of sales taxes on capital equipment purchases, even when purchased out-of-state. Any applicable sales taxes are the responsibility of the customer. Audio Authority is required to charge sales tax in California, Kentucky and Tennessee. Consult your state revenue office.
OEM Products, Custom Projects, and Roll-outsCustom and O.E.M. products are available on a quotation/contract basis only. Typically a deposit is required prior to the initial production run of any custom or O.E.M. project.
Foreign DistributorsAudio Authority products are sold factory direct in North America. Audio Authority products are available in many countries through independent distributors. Please contact the factory for more information on product availability outside North America.
Installation Services and TermsAudio Authority can provide installation services in your business to deliver the quality and expert installation you have come to expect from Audio Authority. Installation Services are available upon a quotation/contract basis.
ShippingYour order will normally ship via ground service with the freight charges added to the order. Expedited delivery via Next Day or Second Day is available at an additional charge. International shipments are made via a carrier of the customer’s choosing and freight charges are prepaid and added to the invoice. Any customs, duties or taxes are the responsibility of the consignee. All shipments are FOB our dock, Lexington, Kentucky. Merchandise is consigned to and becomes the responsibility of the customer upon leaving our dock.
Claims for damages or errors must be made within 5 days of receipt. Any claims for damage must first be reported to the delivering carrier (save all packing and cartons).
Shipping Tip:
CUSTOMELECTRONICDESIGN &INSTALLATION ASSOCIATION
®
It’s easy to order any Audio Authority product...
• Call Toll-Free: 1-800-322-8346 (US and Canada) or 859-233-4599• The toll free number is staffed Monday-Friday, 8:30 to 5:00 EST• E-mail: [email protected]• Fax: 859-233-4510• Fax and e-mail are available 24 hours a day.
Certain items are also available for purchase online at www.audioauthority.com
These credit cards are accepted for any purchase.
Audio Authority is a proud member of the following organizatioins:
Other Fine PrintAll pricing shown in US Dollars. Pricing, terms of sale, and specifications shown in this catalog supersede all previously published information and are subject to change without notice. Audio Authority and the Double-A Symbol are registered trademarks of Audio Authority Corp. Access Demonstration Network, AccessEZ, AccessPC, DirectSelect, AutoDamping, TheftAlert, AutoLimiting, AutoSwitch, AutoCal, and SilenTouch are trademarks of Audio Authority. Audio Authority products are protected by US Patents 5,422,631 and 5,646,602. Other patents pending. Copyright March, 2006.HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Toslink is a trademark of Toshiba America. Dolby Digital and ProLogic are trademarks of Dolby Labs.
Statement of Limited Product WarrantyElectronic switch modules are covered by our 5-year Guaranteed Replacement Warranty (copy available upon request). Other Audio Authority® products (DC power supplies & fixtures, mechanical switching products, consumer products, etc.) are warranted to the original purchaser to be free of defects in materials and workmanship for a period of one year from date of shipment. During the warranty period, defective products are usually repaired in-field by exchange of circuit board modules, or returned to the factory for repair at no charge. Units returned for service must be shipped freight prepaid after obtaining a Service Authorization Number. Units repaired under warranty will be returned ground freight prepaid. This warranty is void for products which, in our opinion, have been subject to accident, alteration, misuse, abuse, lightning damage, or improper installation. Audio Authority assumes no responsibility for consequential damages arising from the use or misuse of these products. See the “Service Policy & Procedures” statement for complete information, available at www.audioauthority.com or upon request.
We don’t need to tell you, returned goods is one of the biggest headaches CE retailers must manage today. The Model 1020VS is a multi-purpose all-in-one audio/video test set that will save you money on alleged “out-of-box defective merchandise” as well as improperly installed components. Verify AV components before installation, before selling used equipment, and before exchanging “defective” components which may simply have been installed incorrectly. Head unit, DC power supply, and video display not included.
Model 1020VS Audio Video Bench Test Unit
• DVD players• CD players • Car radios • Changers • Equalizers • Amplifiers • Speakers • Powered subs • High level subs • Multi channel home
theater receivers
The 1020VS allows you to verify products immediately when returned as defective.Stop Wasting Money on Returned Goods!
