“ाट मीर परीण अटता” पर एक दिवसीय रा र ीय संगोी 20 फरवरी 2020 (गुरवार) ONE day NATIONAL SEMINAR ON “SMART METER TESTING QUALIFICATION” 20 th February 2020 (Thursday) आयोजक / Organised by मीरन एवं उपयोदगता चालन भाग (एम यू ए डी)/ Metering and Utility Automation Division (MUAD) केीय दवि् युत अनुसंधान संथान (सी पी आर आई)/ CENTRAL POWER RESEARCH INSTITUTE (CPRI) ो. सर सी.वी. रामन रोड/ Prof. Sir. C. V. Raman Road सिादिवनगर डाक घर, पो. बा. सं . 8066 / Sadashivanagar PO, P.B. No. 8066 बगलूऱ – 560 080 (भारत) / Bengaluru – 560 080 (INDIA) www.cpri.in
Transcript
“स्मार्ट मीर्र परीक्षण अर्टता”
पर एक दिवसीय राष्ट्र ीय संगोष्ठी 20 फरवरी 2020 (गुरुवार)
ONE day NATIONAL SEMINAR ON “SMART METER TESTING QUALIFICATION”
20th February 2020 (Thursday)
आयोजक / Organised by
मीर्रन एवं उपयोदगता स्वचालन प्रभाग (एम यू ए डी)/ Metering and Utility Automation Division (MUAD)
केन्द्रीय दवि्युत अनुसंधान संस्थान (सी पी आर आई)/ CENTRAL POWER RESEARCH INSTITUTE (CPRI)
प्रो. सर सी.वी. रामन रोड/ Prof. Sir. C. V. Raman Road
Central Power Research Institute was set up in 1960 by the Government of India and
functioning as a National organization for applied research in power sector and to serve as
an independent body for the testing and certification of power equipment. It is a premier
research and testing institute in the field of power sector meeting the expectations of
industries and utilities by nationwide and globally. CPRI laboratories are equipped with state
of art technology equipment to meet the testing requirement of National and International
standards. CPRI also provides consultancy services on various needs of power sector. It has
been offering its services for over six decades to the power sector in its quest for innovation,
new product development, import substitution, quality assurance etc. CPRI laboratories are
accredited by NABL, UCA International Users Group-USA & ISO 9001 certified and also
recognised by ASTA Intertek, DEWA, UL, CSA & BIS. CPRI is STL Member and DLMS UA
Member. Test Reports issued by CPRI are accepted worldwide. CPRI is a premier institute
for providing training and continuing education to the personnel of utilities and industries in
the power sector. CPRI has vast experience and expertise in the areas of material
characterization, simulation, diagnostic, calibration, system analysis and several other areas.
The Headquarters is located at Bengaluru and other units are at Bhopal, Hyderabad,
Nagpur, Noida, Guwahati and Kolkata.
ABOUT METERING AND UTILITY AUTOMATION DIVISION (MUAD)
MUAD, CPRI is consisting of four laboratories namely Calibration Laboratory, Energy Meter
Testing Laboratory, Metering Protocol Laboratory and Substation Automation System
Laboratory (SASL). Calibration Laboratory is rendering calibration services for calibration of
Reference standard meters and sub-standard meters (by using 100ppm Reference
Standard). Energy Meter Testing Laboratory is rendering metrological testing services for
Type Testing, Acceptance Tests, Routine Tests, Tamper and Additional Tests on Energy
meters, Prepayment meters and Smart Meters. Metering Protocol Laboratory is rendering
DLMS/COSEM protocol testing services for Energy meters and Smart Meters. CPRI is a
member in DLMS UA, Switzerland. Substation Automation System Laboratory is rendering
IEC 61850 Conformance and DNP3.0 Conformance for Substation Automation devices. All
our laboratories provide Developmental Tests for their design confirmation. All our
Laboratories are duly accredited by NABL as per ISO/IEC 17025: 2017 standard and
recognised by Bureau of Indian Standards. The Substation Automation System Laboratory is
duly accredited by UCA IUG as Level ‘A’. MUAD also provides consultancy on SCADA,
Automation and Smart Grid related activities.
PROGRAMME OVERVIEW AND OBJECTIVE
As per the guidelines of Ministry of Power, Govt. of India, the rollout of Smart meters in the country by the Utilities is on the fast track. To cater to this ambitious initiative our test laboratories at Bengaluru and Bhopal are geared up to meet the expected demand and quality assurance of testing of Smart meters. At this juncture the awareness about the testing procedures as per relevant standards is a matter of interest for all technical personnel of utilities and manufacturers. All utilities are looking for the implementation of Smart Meters at their consumers’ premises for online monitoring of the load and consumption patterns and allow their consumers to use/ schedule their consumption effectively to ensure uninterrupted power supply to all, by reducing the peak demand, enforcement to sanctioned load limit and detecting tampering and theft events. This is accomplished by transmitting the data automatically through a communication network. Robust communication technologies would be a back bone to have
reliable communication in the distribution system. Communication is an additional key feature in smart meter to the prevailing conventional electricity meters. So stability and reliability of smart meter technology is most desired aspect to be confirmed by actual testing (both metrological testing and protocol testing) of smart meter, before putting them in the field. Bureau of Indian Standards (BIS) has published relevant standards IS 16444 (Part 1) for a.c. Static direct connected watthour Smart Meters, Class 1 & 2 and IS 16444 (Part 2) for a.c. Static transformer operated watthour and Var-Hour Smart Meters, Class 0.2S, 0.5S & 1.0S in the country. The quality of Smart meter is non-negotiable for which testing of Smart Meters is paramount to evaluate its performance based on relevant Standards. Therefore, it is very much essential to have in depth knowledge on the procedure of Type testing and Data exchange
protocol testing as per IS 16444 (Part 1 & Part 2) and IS 15959 (Part 2 & Part 3). Many utilities have already floated tenders for procurement of Smart meters. Pilot projects for smart grid across the country are at different stages of implementation. At this juncture the awareness about AMI, communication technologies, standards, testing qualification requirements are matter of interest to manufacturers, utilities and stake holders. The objective of this programme is to familiarize Engineers in understanding the smart meter testing aspects.
ABOUT THE SEMINAR
Training of human resources is always paramount for any organisation. CPRI is organising this Seminar on Smart Meter Testing Qualification, which is designed to take on in-depth dive on smart meter technology and to provide interactive platform for enrichment of knowledge. This Seminar is meant to disseminate knowledge and provide platform for experience sharing in the field of testing smart meters. Our main focus will be on Type testing & Data exchange protocol qualification. The seminar will also highlight on Smart meter technologies, communication technologies, smart meter infrastructure and case studies of smart meter implementation. The Seminar consists of lectures by experts followed by discussions and visit to the test laboratories. TOPICS
The Seminar covers:
Smart Meter Technologies.
Communication technologies for Smart Meters.
Standards and Type testing of Smart meters.
Data exchange meter protocol (DLMS/COSEM) for Smart meters.
Smart meter infrastructure and Case studies. WHO SHOULD ATTEND
The Seminar is aimed at professionals of Power utilities, Meter manufacturers, Technology and Solution providers, Service providers, Researchers, Academia, Renewable energy industry, System Integrators, Regulators, IT & Communication equipment suppliers, consultants etc. REGISTRATION FEE
For Manufacturers / Industries * Rs. 5,000 plus GST @ 18% per participant
For Power Utilities / Electricity Boards / Faculty members of Academic Institutions
Rs. 3,500 plus GST @ 18% per participant
For Students of Academic Institutions Rs. 2,500 plus GST @ 18% per participant
* Group discount of 10% on the registration fee for minimum three participants and 20% on the registration fee for four or more participants attending from the same organisation. The registration fee shall be made in advance through NEFT/RTGS to State Bank of India, IISC Branch, Bengaluru, India (IFSC code: SBIN0002215, Branch MICR No.: 560002109,
(Bengaluru) or by way of DD drawn in favour of “Accounts Officer, CPRI, Bengaluru” payable at Bengaluru. CPRI GST No. is 29AAAAC0268P1ZF.
The registration fee includes kit, course material, tea/coffee with snacks and lunch.
Registration form, may be completed in all respect and shall be sent to the programme co-ordinators(s) along with the registration fee. Kindly use separate form for each participant, downloaded/photo copy of registration form is acceptable.
EVENT SPONSORSHIP OPPORTUNITIES
Category/Type Amount (Rs) * Benefit/Number of free delegates #
Gold 50,000/- 5 (Five)
Silver 30,000/- 3 (Three)
* Inclusive of GST @18%. # The name & logo of Gold & Silver sponsoring organization will be displayed in the Seminar venue.
SEMINAR VENUE AND DATE
Venue: CCAR, CPRI, Bengaluru Date and Time: 20th February, 2020 (9.00 AM to 5.30 PM), Registration starts from 8.30 AM.
TRAVEL AND ACCOMMODATION
This is a non-residential programme, participants have to make their own arrangements for travel and accommodation. However, accommodation upon request can be arranged at guest house of CPRI on payment basis subject to availability. CPRI is about 32KM from the Airport and around 8 KM from the Bengaluru City Railway station and City Bus Station.
