AAC’s Ceramic and RF products Catalogue - A-antennas Catalogue.pdf · Qualified by...

AAC’s Ceramic and RF products Catalogue

CONTENTS

1. Company History --------------------------------------------------------------------------- 3

2. Multilayer RF Passive Components -------------------------------------------------- 4

3. Quality / Reliability / Packing ---------------------------------------------------------- 26

4. Ceramic Substrate for LED lighting ------------------------------------------------- 29

5. Ceramic Foundry Service for RF, ISM … ----------------------------------------- 30

6. RF Module for ZigBee Application -------------------------------------------------- 31

Vision To provide the Best Total Miniature Communications

Component Solution

Company History

1993 Company founded

1996 Set up US sales office

1997 Started shipping transducers for mobile phones and selling products to Motorola

2000 Established sales office in Europe and started mass production of miniature receivers

2004 Mass production of racetrack receivers and speakers

2005 Qualified by mass-production for Sony-Ericsson, became a listed company on the Stock Exchange of Hong Kong in August

2006 Mass production of SMD microphones and pancake vibrators

Global Sales and Support

3

Multilayer RF Passive Components AAC Technologies provides ceramic components to the wireless industries. AAC’s high performance and high reliable components help our customer to have competitiveness. Our RF components cover from 50MHz band to 6GHz band applications such as FM, DAB, DVB, Bluetooth, WiFi, Wimax etc. Band Pass Filter: It is a device that passes frequencies within a certain range

and rejects (attenuates) frequencies outside that range.

Balun: It is a type of electrical transformer that can convert electrical signals that are balanced about ground (differential) to signals that are unbalanced (single-ended) and vice versa. They are also often used to change and match impedance.

Balance Filter: It is the combination both of band pass filter and balun. Using balance filter, customer could get advantages of small form factor and we can also provide customized impedance matching service for high volume manufacturing.

Diplexer: It implements frequency domain multiplexing. Two ports are

multiplexed onto a third port. Signals from the common port are divided into two frequency band signal (low and high band) without interfering with each other.

Chip Antenna: It is a kind of antenna and has relatively small form factor comparing with other antenna solution. AAC provide ceramic antennas for 2.4GHz ISM band for Bluetooth and WiFi application.

4

Band Pass Filter

Part No. : SF24B05186NX

L 1.60 ± 0.15 mm

W 0.80 ± 0.10 mm

T 0.60 ± 0.10 mm

a 0.70 ± 0.15 mm

b 0.45 ± 0.10 mm

c 0.20 ± 0.10 mm

d 0.30 ± 0.10 mm

e 0.30 ± 0.10 mm

Electrical Specification

Item Unit Specifications

Center Frequency (= Fc) MHz 2450

Pass Bandwidth (= BW) MHz ± 50

Insertion Loss @ BW dB 2.4 max.

Ripple @ BW dB 1.0 max.

V.S.W.R @ BW - 2.0 max.

In, Output Impedance Ohm 50

Attenuation dB 25 min. @ 880 ~ 960 MHz

dB 20 min. @ 1710 ~ 1990 MHz

dB 8.5 min. @ 2170 MHz

dB 15.5 min. @ 4800 ~ 5000 MHz

dB 20 min. @ 7200 ~ 7500 MHz

Operation Temperature Range °C -40°C ~ +85

Typical Plot

(Narrow View)

(Wide View)

Recommended Land Pattern

5

Band Pass Filter

Part No. : SF24D05185NX

L 1.60 ± 0.15 mm

W 0.80 ± 0.10 mm

T 0.55 ± 0.10 mm

a 1.30 ± 0.15 mm

b 0.15 ± 0.10 mm

c 0.50 ± 0.10 mm

d 0.30 ± 0.10 mm

e 0.30 ± 0.10 mm

f 0.50 ± 0.10 mm







V.S.W.R @ BW - 2.0 max.



dB 45 min. @ 1710 ~ 1980 MHz

dB 20 min. @ 2110 ~ 2170 MHz

dB 30 min. @ 4800 ~ 5000 MHz

dB 20 min. @ 7200 ~ 7500 MHz


Typical Plot

(Narrow View)

(Wide View)


6

Band Pass Filter

Part No. : SF24A05218NX

L 2.00 ± 0.15 mm

W 1.25 ± 0.10 mm

T 0.80 ± 0.10 mm

a 1.60 ± 0.15 mm

b 0.20 ± 0.10 mm

c 0.20 ± 0.10 mm

d 0.30 ± 0.10 mm

e 0.30 ± 0.10 mm







V.S.W.R @ BW - 2.0 max.

In, Output Impedance Ohm 50 Ω


dB 28 min. @ 1710 ~ 1910 MHz

dB 6 min. @ 2110 ~ 2170 MHz

dB 23 min. @ 4800 ~ 5000 MHz


Typical Plot

(Narrow View)

(Wide View)


7

Band Pass Filter


L 2.00 ± 0.15 mm

W 1.25 ± 0.10 mm

T 0.80 ± 0.10 mm

a 1.60 ± 0.15 mm

b 0.20 ± 0.10 mm

c 0.20 ± 0.10 mm

d 0.30 ± 0.10 mm

e 0.30 ± 0.10 mm


Item Uint Specifications





V.S.W.R @ BW - 2.0 max.



dB 38 min. @ 1710 ~ 1910 MHz

dB 20 min. @ 2110 ~ 2170 MHz

dB 30 min. @ 4800 ~ 5000 MHz

dB 30 min. @ 7200 ~ 7500 MHz


Typical Plot

(Narrow View)

(Wide View)


8

Band Pass Filter


L 2.50 ± 0.15 mm

W 2.00 ± 0.10 mm

T 0.75 ± 0.10 mm

a 1.90 ± 0.15 mm

b 0.30 ± 0.10 mm

c 0.30 ± 0.10 mm

d 0.50 ± 0.10 mm

e 0.30 ± 0.10 mm







V.S.W.R @ BW - 2.0 max.


Attenuation dB 10 min. @ 100 MHz

dB 25 min. @ 500 MHz

dB 35 min. @ 1472 MHz


Typical Plot

(Narrow View)

(Wide View)


9

Band Pass Filter


L 2.50 ± 0.15 mm

W 2.00 ± 0.10 mm

T 1.20 ± 0.10 mm

a 1.90 ± 0.15 mm

b 0.30 ± 0.10 mm

c 0.30 ± 0.10 mm

d 0.50 ± 0.10 mm

e 0.30 ± 0.10 mm







V.S.W.R @ BW - 2.0 max.




Typical Plot

(Narrow View)

(Wide View)


10

Band Pass Filter


L 3.20 ± 0.15 mm

W 2.50 ± 0.10 mm

T 1.20 ± 0.10 mm

a 0.55 ± 0.15 mm

b 0.45 ± 0.10 mm

c 1.00 ± 0.10 mm

d 0.40 ± 0.10 mm

e 0.70 ± 0.10 mm

f 0.40 ± 0.10 mm







V.S.W.R @ BW - 2.0 max.



dB 30 min. @ 500 MHz

dB 35 min. @ 1472 MHz


Typical Plot

(Narrow View)

(Wide View)


11

Balun

Part No. : SB24B10218DX

L 2.00 ± 0.15 mm

W 1.20 ± 0.10 mm

T 0.80 ± 0.10 mm

a 0.30 ± 0.15 mm

b 0.35 ± 0.10 mm

c 0.65 ± 0.10 mm

d 0.30 ± 0.10 mm

e 0.20 ± 0.10 mm






Unbalanced Impedance Ohm 50

Balanced Impedance Ohm 100

V.S.W.R @ BW(unbalanced port) - 2.0 max.

Amplitude Balance dB ±1

Phase Balance ° 180 ±10

Power capacity mW 500


Typical Plot

(S.W.R) (Pass band)

(Amplitude balance) (Phase balance)


12

Balun

Part No. : SB54B10218NX

L 2.00 ± 0.15 mm

W 1.20 ± 0.10 mm

T 0.80 ± 0.10 mm

a 0.30 ± 0.15 mm

b 0.35 ± 0.10 mm

c 0.65 ± 0.10 mm

d 0.30 ± 0.10 mm

e 0.20 ± 0.10 mm













Typical Plot

(S.W.R) (Pass band)

(Amplitude Balance) (Phase Balance)


13

Balance Filter

Part No. : BF24A05216D8

L 2.00 ± 0.15 mm

W 1.20 ± 0.10 mm

T 0.60 ± 0.10 mm

a 0.30 ± 0.15 mm

b 0.35 ± 0.10 mm

c 0.65 ± 0.10 mm

d 0.20 ± 0.10 mm

e 0.50 ± 0.10 mm

f 0.20 ± 0.10 mm

g 0.20 ± 0.10 mm









Attenuation dB 30 min. @ 880~960 MHz

dB 30 min. @ 1710~1910 MHz

dB 30 min. @ 4800~5000 MHz





Typical Plot

(Narrow View) (Wide View)



14

Balance Filter

Part No. : BF24A4R218D8

L 2.00 ± 0.15 mm

W 1.20 ± 0.10 mm

T 0.80 ± 0.10 mm

a 0.30 ± 0.15 mm

b 0.35 ± 0.10 mm

c 0.65 ± 0.10 mm

d 0.20 ± 0.10 mm

e 0.50 ± 0.10 mm

f 0.20 ± 0.10 mm

g 0.20 ± 0.10 mm







Balanced Impedance Ohm Conjugate match to CSR series



dB 25 min. @ 1710~1910 MHz

dB 30 min. @ 4800~5000 MHz

Amplitude Balance dB ±1.5




Typical Plot




15

Balance Filter

Part No. : BF24A10218D8

L 2.00 ± 0.15 mm

W 1.20 ± 0.10 mm

T 0.80 ± 0.10 mm

a 0.30 ± 0.15 mm

b 0.35 ± 0.10 mm

c 0.65 ± 0.10 mm

d 0.20 ± 0.10 mm

e 0.50 ± 0.10 mm

f 0.20 ± 0.10 mm

g 0.20 ± 0.10 mm










dB 25 min. @ 1710~1910 MHz

dB 20 min. @ 4800~5000 MHz





Typical Plot




16

Diplexer

Part No. : DFBAA05218NX

L 2.00 ± 0.15 mm

W 1.20 ± 0.10 mm

T 0.80 ± 0.10 mm

a 0.30 ± 0.15 mm

b 0.35 ± 0.10 mm

c 0.65 ± 0.10 mm

d 0.20 ± 0.10 mm

e 0.30 ± 0.10 mm

f 0.20 ± 0.10 mm


Item Condition Unit Specifications

Frequency Range Low Band MHz 2400~2500

High Band MHz 4900~5850

Insertion Loss Low Band ( +25°C) dB 0.6 max.

High Band ( +25°C) dB 0.85 max.

Impedance Low Band Ohm 50

High Band Ohm 50

Attenuation Low Band (4900~5850 MHz) dB 17 min.

High Band (2400~2500 MHz) dB 21 min.

VSWR Common Low Band - 2.0 max.

High Band - 2.0 max.

Operation Temperature Range °C -40 ~ +85

Typical Plot

\(Low Band View)

(High Band View)


17

Diplexer

Part No. : DFBAA05218NM

L 2.00 ± 0.15 mm

W 1.20 ± 0.10 mm

T 0.80 ± 0.10 mm

a 0.30 ± 0.15 mm

b 0.35 ± 0.10 mm

c 0.65 ± 0.10 mm

d 0.20 ± 0.10 mm

e 0.30 ± 0.10 mm

f 0.20 ± 0.10 mm








High Band Ohm 50






Typical Plot

(Low Band View)

(High Band View)


18

Dual Filter

Part No. : DFTLA05322NF

L 3.20 ± 0.15 mm

W 2.50 ± 0.10 mm

T 1.20 ± 0.10 mm

a 0.55 ± 0.15 mm

b 0.45 ± 0.10 mm

c 1.00 ± 0.10 mm

d 0.40 ± 0.10 mm

e 0.70 ± 0.10 mm

f 0.40 ± 0.10 mm








High Band Ohm 50






Typical Plot

(Low Band View)

(High Band View)


19

Chip Antenna

Part No. : AT(2J)X05311NX

(1) Feed

(2) GND

L 3.20 ± 0.15

W 1.60 ± 0.10

T 1.10 ± 0.10

a 0.62 ± 0.10

b 1.36 ± 0.10

c 1.76± 0.10

Unit : mm

Electrical Specification (typical)

Note (1) : The center frequencies changes with the evaluation board layout. Please refer to the below center frequency table.

ITEM UNIT Data

Operating temperature -40 ~ +85

Center Frequency MHz 2450 (1)

Input Impedance Ω 50

Polarization - Linear

Frequency MHz 2400 2420 2450 2480 2500

Gain Peak dBi (25) 0.5 1.8 1.8 1.7 0.8

Average dBi (25) -3.0 -1.8 -1.3 -1.4 -2.2

Efficiency (%) 50.0 66.2 74.4 71.8 60.3

V.S.W.R @ BW - 3.0 max

Fc (GHz) 2.3 2.36 2.4 2.45 2.48 2.53

Marking 2G 2H 2I 2J 2K 2L

Fc (GHz) 2.58 2.62 2.66 2.73 2.78 2.83

Marking 2M 2N 2O 2P 2Q 2R

Typical Plot

(VSWR)


20

Coupler

Part No. : CL08A050650X

L 6.35 ± 0.25 mm

W 5.08 ± 0.25 mm

T 1.50 ± 0.15 mm

a 4.20 ± 0.10 mm

b 2.93 ± 0.10 mm

c 1.08 ± 0.10 mm

d 0.60 ± 0.10 mm



Frequency Range MHz 815~960

Isolation dB 18 min.

Insertion Loss dB 0.35 max.

VSWR - 1.2 max.



Power Capacity W 80

Operating Temperature °C -55 ~ +85

Typical Plot

(Narrow View)


21

Coupler


L 6.35 ± 0.25 mm

W 5.08 ± 0.25 mm

T 1.50 ± 0.15 mm

a 4.20 ± 0.10 mm

b 2.93 ± 0.10 mm

c 1.08 ± 0.10 mm

d 0.60 ± 0.10 mm






VSWR - 1.2 max.



Power Capacity W 80

Operating Temperature °C -55 ~ +85

Typical Plot

(Narrow View)


22

Coupler


L 14.22 ± 0.25 mm

W 8.89 ± 0.25 mm

T 1.75 ± 0.35 mm

a 9.18 ± 0.10 mm

b 3.85 ± 0.10 mm

c 2.52 ± 0.10 mm

d 1.02 ± 0.10 mm






VSWR - 1.2 max.



Power Capacity W 200

Operating Temperature ˚C -55 ~ +85

Typical Plot

(Narrow View)


23

Coupler


L 14.22 ± 0.25 mm

W 8.89 ± 0.25 mm

T 1.75 ± 0.35 mm

a 9.18 ± 0.10 mm

b 3.85 ± 0.10 mm

c 2.52 ± 0.10 mm

d 1.02 ± 0.10 mm






VSWR - 1.2 max.



Power Capacity W 80


Typical Plot

(Narrow View)


24

Delay Line

Part No. : DL21X05AA2N6

L 12.0 ± 0.25 mm

W 12.0 ± 0.25 mm

T 2.40 ± 0.15 mm

a 5.00 ± 0.10 mm

b 1.10 ± 0.10 mm

c 1.10 ± 0.10 mm

d 2.40 ± 0.10 mm




Delay Time ns 4±0.2


Return Loss @ BW dB 15 min.

Impedance (Input, Output) Ohm 50


Typical Plot

(Narrow View)


25

Quality……………………………………………. With our improvement on quality control, we are qualified in the strictest certification in the industry. AAC is fully qualified for ISO9001, ISO14001 and TS16949 Certification.

ISO9001 ISO14001 ISO-TS16949

26

Reliability………………………………………....

Overall reliability of electronic products Component failure analyses Equipment reliability analyses Material analyses Chemical analyses

Reliability test capability Reliability

Long term maximum power

Short term maximum power

Long term power

Chemical

Salt Mist

Nitric acid

Humidity cycle test

Environmental

Storage

Thermal Shock test

Temperature cycling test

Mechanical

Mechanical shock Sinusoidal vibration Random vibration Drop test Contact spring lifetime test Bending

ESD

ESD

DC safety

27

Packing…………………………………………... They can be supplied in tape-and-reel packaging for automated-assembly production

Detail Specification

28

Ceramic Substrate for LED lighting AAC Technologies provides ceramic substrate solution for LED lighting. Our ceramic substrates are appropriate for high power LED application. AAC offer customized ceramic substrate solution using internally developed process and technologies.

Substrate Structure

Technology Advantage

- High Reflectivity (Silver Reflector)

- Miniature and Thinner (Multi-step Cavity)

- High Thermal Conductivity (Silver Slug) Thermal Resistance Rth J-S 8 K/W

- Surface mount device

- Multi-chip design

- Pb-free & RoHS Compliant

29

Ceramic Foundry Service

For RF, ISM … application AAC Technologies provides ceramic foundry service. AAC’s experienced and expert engineers bring our customers optimized ceramic substrate solution.

General Design Rule

SYMBOL ITEMS VALUE (mm)

A Line width 0.08 Min.

B Line to line spacing 0.08 Min.

C Via diameter 0.08 / 0.10 / 0.15

D Via land diameter 0.125 / 0.15 / 0.20

E Via pitch (center to

center) 0.20 / 0.30 / 0.375

F Via land to via land

spacing 0.10 Min.

G Via land to line spacing 0.10 Min.

H PKG edge to via spacing 0.25 Min.

I PKG edge to via land

spacing 0.20 Min.

J Unit edge to line spacing 0.20 Min.

K GND pattern Isolation

gap 0.15 Min.

30

RF Module for ZigBee Application AAC Technologies provides RF module for ZigBee standard. AAC’s high performance ZigBee module helps you strengthen competiveness of your business.

ZigBee is the set of specs built around the IEEE 802.15.4 wireless

protocol. The standard itself is regulated by a group known as the ZigBee Alliance. ZigBee has been developed to meet the growing demand for capable wireless networking between numerous low-power devices.

Frequency - 2.4GHz (Global)

Data Rate - 250Kbps @ 2.4GHz

Acting Area - Smart Energy

- Home Automation

- Sensor Network

- Personal, Home and Hospital Care

- Commercial Building Application

- Telecom Application

- PC and TV remotes

31

ZigBee Module

Part No. : RP-M100

Appearance Key Features - IEEE802.15.4 SOC Moudle

- Flash 96KB

- Data 8KB

- PCB Chip antenna

- -100dBm High sensitivity

- 2.4GHz ISM Band

- 16channels


Pin Description

Dimension


32

ZigBee Module

Part No. : RP-M500

Appearance Key Features - IEEE802.15.4 SOC Moudle

- Flash 96KB

- Data 8KB

- High gain LTCC antenna


- 2.4GHz ISM Band

- 16channels


Pin Description

Dimension


33

ZigBee Module

Part No. : RP-M2410

Appearance Key Features - IEEE802.15.4 transciver only.

- Data rate 32.25kbps~4Mcps.

- RF Power 10dBm

- High gain LTCC antenna


- 2.4GHz ISM Band

- 16hannels


Pin Description


34

Date post:	04-Jun-2018
Category:	Documents
Upload:	ngokhanh
View:	224 times
Download:	0 times

AAC’s Ceramic and RF products Catalogue - A-antennas Catalogue.pdf · Qualified by...

Documents