AB Catalogue 2013

8/10/2019 AB Catalogue 2013

1/150

2013

CATALOG


2/150


3/150

2013 CATALOG


4/150

CONTENTS

COMPANY PROFILE

IMPLANTOLOGY

UNIQUE PRODUCTS

KEY OF SHORTCUTS

DENTAL IMPLANTS

PROSTHETICS

STANDARD PLATFORM (3.75mm diameter)

Healing cap

Impression transfer

Analog

Temporary abutment

Impression sleeve for casting

Cemented rehabilitation

Screw-retained rehabilitation

Removable denture

4

6

10

14

15

31

33

36

38

40

41

44

48

54

66

73

75

76

77

78

79

81

82

85

87

88

89

NARROW PLATFORM (3mm diameter)

Healing cap

Impression transfer

Analog

Impression sleeve for casting

Cemented rehabilitation

Screw-retained rehabilitation

Removable denture

ONE PIECE IMPLANT

Impression transfer

Analog

PROSTHETIC KIT


5/150

91

92

100

102

103

120

122

122

123

124

127

128

129

129

130

130

132

134

ABGUIDEDSERVICE

general information about the service

advantages

which cases can be used with abguided?

how does it work?

flow chart

abguidedservice drills kit

products index

TOOLS & ACCESSORIES

drills

drivers

professional implantology tools

surgical kits

bone graft & membrane

ab cem

tlj

ab shine

motor system for implantology


6/150

COMPANY PROFILE

AB Dental is a leading international company specializing in the development,manufacturing and marketing of Dental implants and oral rehabilitation solutions

thus providing a wide range of implants and rehabilitation units to satisfy all clinical

needs.

Quality Control

The policy of AB Dental is to provide safe and high precision Dental products and

services which undergo strictest quality control measures.

High Standards

All AB Dental products adhere to the highest international standards and have CE

mark and FDA approval. In addition we have obtained the approvals of the ministry

of health and regulatory bodies from countries in which we market our products.

Our commitment is to comply with the local regulatory norms of each country.

Our high standard is a result of years of investment in R&D and vast experience in

the sales of Dental implants in more than 45 countries worldwide

Complete Dental Solution

A unique, exclusive and patented service that enables the dentist, at the click of a

button, on his computer, to plan a precise implantation procedure. Planning and

performing of computerized implantation is prepared by AB Dental imaging center.

A Surgical Guide can be produced digitally from this 3D plan to bring the virtual


7/150

This service includes the transmission of the information from the CT centerto the doctors computer. The service provides computerized implant planning,

in accordance to the dentists instructions. The service shall also include the

rehabilitation plan as well as a complete surgical kit.

Always one step ahead

AB Dental high international standards together with its constant innovative and

unique developments (among which five are international registered patents)

give the company its worldwide market reputation as a worldwide leader in theimplantology field.

Research & development

For twenty years AB Dentals R&D Department and its Academic Advisory board

have been committed to the continued innovative approach in both products and

advanced technologies. AB Dentals advisory board keeps abreast with clinical

research activities maintaining excellence whilst meeting the challenges and

demands presented by the dental industry.

Guaranteed Satisfaction

AB Dental vision is to guarantee our customers satisfaction in re-assuring that the

companys products have been specifically designed to provide full functionality

and the maintenance of an aesthetic appearance over time in order to keep our


8/150

IMPLANTOLOGY

Material

All AB Dental implants are made of titanium alloy Ti-6Al-4V ELI grade 5,

in accordance with ASTM-F136-02 standard specification.

Titanium is a proven ideal implant material, mainly due to its ability to integrate

almost completely with the bone. In addition to being bio-friendly, it provides

favorable mechanical qualities (strength, endurance) and can be precisely

fabricated (precision measured in microns) to ensure a range of implants that meet

the requirements for optimizing stability in the widest range of patients (considering

the dimensions and state of health of an individuals bone and gums).

Biological surface

AB Dental implants undergo a special treatment of Biological blasting with calcium

phosphate for surface roughening, to enhance the direct attachment of the bone to

the implant (Osseointegration), as supported by the following quote from an article

that compared different surface treatments:As the implant surface is the first part of the device to contact the hosts biological

fluids, it is expected that its properties will affect the early healing between host

and implant (Albrektsson & Wennenberg, 2004).

Over the years, implant surfaces have evolved from smooth as-turned surfaces

towards textured surfaces Surface texturization may be achieved through a series


9/150

biocompatibility have been expressed (Lemons, 2004).The new biological surface, offered by AB Dental, combines all the technological

innovations within one surface resulting in biological advantages.

The wide particle range bioactive ceramic media blasting with mild gradative

multi-step cleaning assures a moderately rough surface (Figures 1 and 2) along

with a highly biocompatible surface chemistry where only Osseo conductive and

biocompatible elements can be detected (Figure 3).

(Albrektsson & Wennenberg, 2004).

References:

Albrektsson T, Wennerberg A. Oral implant surfaces: Part 1-review focusing on

topographic and chemical properties of different surfaces and in vivo responses

to them. Int J Prosthodont 2004;17(5):536-43.

Coelho PG, Granjeiro JM, Romanos GE, Suzuki M, Silva NR, Cardaropoli G,

Thompson VP, Lemons JE. Basic research methods and current trends of dental

implant surfaces. J Biomed Mater Res B Appl Biomater 2009;88(2):579-96. Lemons JE Biomaterials, biomechanics, tissue healing, and immediate-

function dental implants. J Oral Implantol 2004;30(5):318-24.


10/150

IMPLANTOLOGY

Figure 1:

Scanning electron micrographs of

the biological surface. The bioactive

ceramic media blasting with mild

gradative multi-step cleaning assures

a moderately rough surface. The

surface treatment results in surface

texturization in the micrometer and

nanometer level, maximizing the

interaction between surface and

biological fluids immediately after

implantation, and load bearing

30m

100m 50m

20m

Figure 2:

Representative three-dimensional

topographical reconstruction showing

texturization at the micrometer and the

nanometer level.

Figure 3:

Surface specific spectroscopy detecting

only the elements of the implant with

no contamination.


11/150

Switch Platform

All AB Dental implants and abutments support the switch platform system (Except

N abutments, which form a continuous line with the implant).

Platform switching has been shown to have the potential to reduce the vertical boneresorption and can be considered a means of preventing initial peri-implant bone

loss.

Whenever the abutment is different in diameter than the implant fixture, a certain

amount of the implant platform is exposed. This exposed area of the platform can

allow for the tissues of the biologic width - junctional epithelium and soft connective

switch platform Non switch platform

gum abutment

implant

bone

gum abutment

implant

bone


12/150

UNIQUE PRODUCTS

Double platform Implants - The complete fit!

AB Dental has a patented solution for a bridge screwed onto non-parallel

implants. The Research and Development team at AB Dental developed implants

with a flat connection platform to facilitate the path of insertion for screw retained

restoration.

The implants are designed to accommodate two restorative platforms:

Deep connection (Internal Hexagon 1.8 mm), suitable for all abutments with

antirotational hexagon. Flat connection (0.2 mm), designed for non-engaging abutments (No hexagon).

P12 - Abutment with flat platform for screw retained restoration

The abutment is used for screw retained restorations and enables restoration on

non-parallel implants by cancelling the hex and thereby cancelling the obstruction

of the insertion path. The P12 system provides a comprehensive solution for

temporary and permanent restoration while retaining maximum precision.If the implants used do not have a double platform, a special adaptor is available,

enabling the use of a flat connection abutment. This adapter provides a second

function as an extension piece.

ISSUEDPATENT!

ISSUEDPATENT!


13/150

P14 - Angular adaptor for screw retained restorations

The adaptor (base & cone) is used for screw retained rehabilitation and enables

rehabilitation on non-parallel implants by correcting extreme angles of the implant.

The angle of the implant is corrected by using a base. The base is available in

angles of 17 and 30 and at heights of 1 and 3 mm. The cone enables connection of a

temporary titanium abutment or a permanent abutment made with plastic sleeves

for casting.

P4 - Angular abutment

An angular abutment of 15, 25, 35 and 45, designed for tilted implants

Developed by AB Dental R&D Department in collaboration with Dr. Yehuda Gil.

P5-20 Angular ball attachment

An abutment that connects a detachable prosthesis to an implant and stabilizes it.

The abutment is available in 1, 2, 3 and 5 mm heights, matching the height of the gums.

The abutment comes with a stainless steel and silicon cap.

Silicon caps are available in three degrees of hardness, 1-3, from the hardest to the

softest.

35 45

ISSUEDPATENT!

ISSUED

PATENT!


14/150

UNIQUE PRODUCTS

Clip carrier

The Clip Carrier is easily removed following implant insertion.

It clips rather than screws into the implant. The clip carrier is equipped with a

rubber stopper, providing stability when inserted to the ratchet. Both the ratchet

and the contra angle driver fit the clip carrier. The positioning of the clip carriers

upper hexagon enables the dentist/surgeon to anticipate the exact location of future

restoration components, since the Clip Carrier operates in conjunction with the

implant hexagon.

P15 - Temporary Abutment

A temporary titanium abutment is available in heights of 1, 2, 3, 4, 5 and 7 mm on

which a plastic cap is attached through a clicking system. The abutment enables

temporary restoration without requiring the use of cement, thereby preventing

cement from flowing to the surgical zone. The shape of the abutment also enables

good healing of the gums, similar to a healing cap. The abutment has no hex,thereby simplifying assembly of the abutments. The plastic caps are available in

three degrees of hardness.

Developed by AB Dental R&D department in collaboration with Dr. Yehuda Gil.


15/150

D3 Clip Transfer

One piece Clip Transfer where no affixing screw is required. This simplified method

of impression taking is used in back teeth where the lack of space does not allow

both the screw and the driver to fit in.

I15 Short Implant

AB Dental offers short implants 6mm and even 5mm long, with diameters

of 4.5mm-8mm. Short Implants are:

The answer for reduced alveolar bone height.

An alternative to complicated and invasive treatments

(bone grafting and sinus lifting).

The width compensates for the short length and provides better load distribution.

The special design with deep wings provides good initial stability.

Special surface treatment enables improved osseointegration.

Platform Switching reduces crestal bone resorption and provides better

esthetics.


16/150

KEY

Implants > Abutments >

Abbreviations

Platform

Composition of the catalog number

D Diameter D1Lesser

diameter

L1 Lesser length LSLessergum level

LS1Greatergum level

H Hexagon

PSpacebetweenthreads

N Narrow

CConical(drills)

St Stopper

O Open Tray

W Wide

G Gold

SC ScrewingSStep (for anatomicabutments)Short (for drills)

The area of contact between the implant and the abutment.

Angle

LLength (for implants)Long (for prostheticand drills)

Diameter

3.75

Length

13

Product name

I5

Product name Diameter Length

3.75 9P3


17/150

DENTAL IMPLANTS


18/150

2SCREW TYPE IMPLANTTwo-piece cylinder Implant. The I2 has gentle ,double and dense threads.

The implant has a double platform for deep and flat conection restoration.Groovy neck (interlaced grooves) design to prevent bone resorption and down

growth of epithelial cells.

This design enables:

Conservative approach implantation Insertion by clipping and crushing

Suitable for:

All types of bone, but optimal usage is in wide and dense bone Immediate

loading is optional single and multiple implantation.

All of the 3.75 mm diameter restoration components are compatible.

This implant is offered with a huge range of measurements.The implant is equipped with a switch platform.

D1

D

P=0.6mmL

TWO PIECES IMPLANT


19/150


20/150

5CONICAL IMPLANTTwopiece conical implant. The I5 has spiral, double, sharp and deep threads.

Groovy neck(interlaced grooves) design to prevent bone resorption and downgrowth of epithelial cells.


Implant primary self-retention and stability Self-tapping Prevents bone tissue

trauma Accelerating the healing Increase of the implants external surface.

Suitable for:

All types of bone but optimal usage is in soft bone Immediate loading

Immediate implantation after extraction (if there is sufficient compact bone)

single and multiple implantation Flapless procedures.

All of the 3.75 mm restoration components are compatible.The implant is equipped with a switch platform.

D1

L

D

TWO PIECES IMPLANT

P=1.2mm


21/150

FINAL DRILL PROTOCOL

13 mm

TPDC 2.0

I53.5

I53.75

I54.2

I54.5

I55.0

I56.0

I57.0

I58.0

TDC 2.7

TDC 3.3

TDC 3.7

TDC 4.0

TDC 4.5

TDC 5.5

TDCI 6.5

TDCI 7.5

Drill Speed (RPM) 900-1200 500-700 400-700 400-600 400-600 300-500 300-500 200-400

Drill Diameter (mm) 2 2.7 3.3 3.7 4 4.2 4.5 5.5

TDC Conical drills | TDCS Counter sink | TPDC - Pilot twist conical drills

All drills are availble with or without irrigation according to the dentist/surgeons preferences.

Procedure recommended by AB Dental should not replace the dentist/surgeons judgment and experience.

Double Platform AB Dental Issued Patent

This patent is provided for all the two-pieces implants.

The I5 implant is offered with two platforms:

Deep (hex connection)

flat (non-hex connection)

Its the perfect solution to facilitate the path of

insertion for screw-retained restoration on non-

Package Content

The package includes the clip Implant

Carrier and a cover screw.

The implant is sealed hermetically in

sterile double packaging.

THE IMPLANT ADDED VALUE

TDCS3.75-4.2

TDCS5-6

OPTIONAL DRILLS

Final drills for dense

bone (type I-II)

I5

Ia

ClipCarrier

IbCoverScrew

16 mm _

13 mm _

11.5 mm _

10 mm _

8 mm _

6 mm _


22/150

TRAPEZE IMPLANTTwopiece conical trapeze shaped implant. The I7 has spiral, double, sharp and

deep threads. The implant has a double platform for deep and flat conectionrestoration. Groovy neck(interlaced grooves) design to prevent bone resorption and

down growth of epithelial cells.



trauma Accelerating the healing process Increase of the implants external

surface.

Suitable for:

All types of bone but optimal usage is in soft bone Immediate loading

Immediate implantation after extraction(if there is sufficient compact bone)Single and multiple implantation Flapless procedures.

All of the 3.75 mm restoration components are compatible.

This implant is offered with a huge range of measurements.

The implant is equipped with a switch platform.

10

D1

L

P=1.2mm

D

TWO PIECES IMPLANT


23/150


13mm

16mm _

13mm _

10mm _11.5mm _

8mm _

6mm _

TPDC 2.0

I104.2

I105.0

TDC 3.7

TDC 4.5

Drill Speed (RPM) 900-1200 800-1000 500-700 400-700 400-600 400-600 300-500 300-500

Drill Diameter (mm) 2 2.2 2.7 3.3 3.7 4 4.2 4.5




I10

Ia

ClipCarrier

IbCoverScrew

OPTIONAL DRILLS

TDCS5-6

TDCS3.75-4.2 Final drills for dense

bone (type I-II)




Flat (non-hex connection)



parallel implants.

Package Content







24/150

Twopiece short & wide implant.

The I15 has spiral, double, sharp and deep threads.The implant has a double platform for deep and flat conection restoration.


Implant primary self-retention and stability Implantation in reduced alveolar

bone height An alternative to bone grafting and sinus lift Better load distribution

(the width compensates for the short length).

Suitable for:

All types of bone but optimal usage is in soft bone Immediate loadingImmediate implantation after extraction(if there is sufficient compact bone)

Single and multiple implantation Flapless procedures.

All of the 3.75 mm restoration components are compatible.

The implant is equipped with a switch platform.

Developed in collaboration with Dr. G. M. Stern.

SHORT & WIDE IMPLANT153.75 mm

L

L1

D1D

P=1.2mm

TWO PIECES IMPLANT


25/150


5 mm

TDI-I15 4.5

TDI-I15 5.5

TDI-I15 6.5

TDI-I15 7.5

I156

I157

I158

Drill Speed (RPM) 900-1200 800-1000 500-700 400-700 400-600 400-600 300-500 300-500 200-400 200-400 200-400

Drill Diameter (mm) 2 2.2 2.7 3.3 3.7 4 4.2 4.5 5.5 6.5 7.5

TDI Drills for I15



I15Implant

Ia

ClipCarrier

IbCoverScrew




Flat (non-hex connection)



parallel implants.

Package Content







26/150

INTEGRAL IMPLANTOne-piece conical implant combined with abutment.

The I7 has spiral, double, sharp and deep threads.Groovy neck(interlaced grooves) design to prevent bone resorption and down

growth of epithelial cells.



trauma Accelerating the healing process Increase of the implants external surface.

Suitable for:

All types of bone but optimal usage is in soft bone Immediate loadingImmediate implantation after extraction( if there is sufficient compact bone)

single and multiple implantation Flapless procedures.

The mechanical preparations (grinding) are optional but are only to be done in the

patients mouth, not in the lab. Extra short implants with a length of 6 mm are

offered in the 3.75, 4.2, 5 and 6 mm diameters.

7

D1

L1

L

P=1.2mm

D

ONE PIECE IMPLANT


27/150


13 mm

TPDC 2.0

TDC 2.7

TDC 3.3

TDC 3.7

TDC 4.5

TDC 5.5

Drill Speed (RPM) 900-1200 500-700 400-700 400-600 400-600 300-500 300-500 200-400

Drill Diameter (mm) 2 2.7 3.3 3.7 4 4.2 4.5 5.5


All drills are availble with or without irrigation according to the dentist/surgeons preferences. Procedure

recommended by AB Dental should not replace the dentist/surgeons judgment and experience.

Package Content

The package includes the clip Implant Carrier and a cover screw.

The implant is sealed hermetically in sterile double packaging.


I7aIntegralImplantCarrier

I73.0

I73.75

I74.2

I75.0

I76.0

OPTIONAL DRILLS

TDCS5-6

TDCS3.75-4.2

Final drills for dense

bone (type I-II)

16 mm _

13 mm _

11.5 mm _

10 mm _

8 mm _

6 mm _


28/150

CONICAL IMPLANTNarrow two-piece conical implant.

The I5-3 narrow implant is especially designed for:narrow ridges narrow interdental spaces.

Suitable for:

All types of bone but optimal usage is in soft bone Immediate loading is optional

single and multiple implantation.

This implant is offered with matching prosthetic solutions (3mm diameters).

5-3

D1

D

L P=1.2mm


13 mm

TPDC 2.0

I5

3.0

TDC 2.2

Drill Speed (RPM) 900-1200 800-1000

Drill Diameter (mm) 2 2 2

TD - Straight drills | TDC Conical drills | TPDC Pilot twist conical drills

All drills are availble with or without irrigation according to the dentist/surgeons preferences. Procedure

Package Content

The package includes

the clip Implant Carrier

and a cover screw.

The implant is sealed hermetically in sterile

double packaging.I5-3

Implant

Ia-3Clip

Carrier

Ib-3CoverScrew

TD2.5

OPTIONAL DRILLS THE IMPLANT ADDED VALUE

Final drills for dense bone

(type I-II)

16 mm _13 mm _

11.5 mm _

10 mm _

8 mm _

6 mm _

NARROW PLATFORM IMPLANT


29/150

NARROW INTEGRAL IMPLANTOne piece conical, narrow, integral implant combined with abutment.

The I6 narrow integral implant is especially designed for: narrow ridges withsufficient depth narrow interdental spaces temporary restoration between

permanent implants.

Suitable for: Immediate loading All types of bone but optimal usage is in dense bone.

Mechanical preparation should be done in the patients mouth (not in the lab).

6

L1

L

D

D1


13 mm

TDPC 2.0

TDC 2.4

TDC 2.7

I62.4

I63

I63.2

Drill Speed (RPM) 900-1200 800-1000 500-700

Drill Diameter (mm) 2 2 2 2 7

TDC - Conical drills | TPDC Pilot twist conical drills

All drills are availble with or without irrigation according to the dentist/surgeons preferences. Optional drills

for dense bone type: TD-1.2 & TD-1.5. Procedure recommended by AB Dental should not replace the dentist/

Package Content



and a cover screw.

The implant is sealed hermetically in sterile

double packaging.


I6Implant

I7aIntegralImplantCarrier

_ 16 mm_ 13 mm_ 11.5 mm_ 10 mm_ 8 mm_ 6 mm


P=1.2mm



30/150

ONE PIECE BALL ATTACHMENT IMPLANTOne-piece narrow implant with ball attachment on top.

The I6b narrow implant is especially designed for:Connecting the implant to a removable denture in narrow ridges.

Suitable for:

All types of bone but optimal usage is in dense bone multiple implantation.

6b

D

L1

L

D1

FINAL DRILL PROTOCOL THE IMPLANT ADDED VALUE

13 mm

TDPC 2.0

I6b2.4

Dr il l Sp ee d ( RPM) 900-1200

D ill Di t ( ) 2

TPDC Pilot twist conical drills


Optional drills for dense bone type: TD-1.2 & TD-1.5. Procedure recommended by AB Dental

I6bImplant

I6baIntegralImplantCarrier

Package Content



and a cover screw.

The implant is sealed

hermetically in sterile double packaging.

_ 16 mm

_ 13 mm_ 11.5 mm_ 10 mm_ 8 mm_ 6 mm


P=1.2mm


31/150


32/150


33/150

PROSTHETICS


34/150


35/150

STANDARD PLATFORM(3.75mm diameter)

Products are sorted out inaccordance with treatmentsequence in the clinic


36/150

INDEXSTANDARD PLATFORM PROSTHETIC

Healing Cap

P0page 36

Impression

Transfer

D2O

page 38

D2

page 38

D3

page 39

Analog

D1page 40

Temporary

Abutment

P15page 41

P3Spage 42

P4Spage 43


37/150

Impression

sleeve for

castingP2

page 44P2-P3Spage 46

P2-P4Spage 47

P9page 45

CementedRehabilitation

P3

page 48

P4

page 50

P3SZ

page 52

P4SZ

page 53

Screw-

Retained

RehabilitationP6H

page 54P7

page 56P12

page 58P14

page 60P16

page 57P24

page 64

Removable

Denture

P5page 66

P5 20page 68

P55page 70

HEALING CAP


38/150

P0TITANIUM HEALING CAPThe healing cap is set on the implant after it has been exposed, and remains in the

jaw until soft tissue (the gums) heals. Its function is to prepare the site for placing the

prosthetic device. Healing caps are available in 3 sizes: normal, narrow and wide.Selected height is a function of the thickness of the gums.

In order to ensure that the healing cap is removed easily from the implant,

the two-pieces healing cap was developed - It is set upon the implant and then tighten

into place with a screw.

The P0/2 has 2 components (healing cap and screw) and is available in 5 different

heights (2,3,4,5,7mm) and as a wide version as well.

This healing cap can be used for switch platform.

D1

D

L


39/150

P0

Titaniumhealing cap

P0-3.75,2 P0-3.75,3 P0-3.75,4 P0-3.75,5 P0-3.75,6 P0-3.75, 7

D

(mm)=3.75

D1

(mm) =4.5

L

(mm) =2, 3, 4,

5, 6, 7

P0NNarrowtitaniumhealing cap

P0N-3.75, 3 P0N-3.75, 4 P0N-3.75, 5 P0N-3.75, 6 P0N-3.75, 7

D

(mm) =3.75

D1

(mm) =3.75

L

(mm) =3, 4, 5,

6, 7

P0WWidetitaniumhealing cap

P0W-3.75, 2 P0W-3.75, 3 P0W-3.75, 4 P0W-3.75, 5 P0W-3.75, 6

D(mm) =3.75D1(mm) =5.5

L

(mm) = 3, 4, 5, 6

IMPRESSION TRANSFER


40/150

D2IMPRESSION TRANSFERHexagon Impression Transfer made of stainless steel and available for open tray -

sharp edges and long screw, and closed tray - round edges and short screw.

Also available with a flat connection.

D2ImpressionTransfer forclosed tray

D2-3.75, 9 D2-3.75, 15

D

(mm) =3.75

D1 (mm) =4.5

L

(mm) =9, 15

D2OImpressiontransfer foropen tray

D2O-3.75, 9 D2O-3.75, 15

D

(mm) =3.75

D1 (mm) =4.5

L

(mm) =9, 15

D2NNarrowimpressiontransfer

D2N-3.75, 9 D2N-3.75, 15

D

(mm) =3.75

D1 (mm) =3.75

L

(mm) =9, 15

D

L

D1

16 mm

7 mm

D2 transfers are available with D2a or D2al screw(short screw for closed tray and long screw for open tray).D2a D2al


41/150

D3CLIP TRANSFERClip impression transfer with no affixing screw.

Suitable for close tray method with higher precision. Especially efficient in posterior

areas with a limited intermaxillary space for a driver. The Clip Transfer remains in theimpression throughout the process.

Important: suitable for parallel implants only.

D3Clip transfer

D3-3.75, 9 D3-3.75, 15

D

(mm) =3.75

D1

(mm) =4.5

L

(mm) =9, 15

D3NNarrow Cliptransfer

D3N-3.75, 9 D3N-3.75, 15

D

(mm) =3.75

D1

(mm) =3.75

L

(mm) =9, 15D

L

D1

ANALOG


42/150

D1ANALOGMade of stainless steel to allow preparation of laboratory models.

Available in 3 diameters: 3.75, 5, 6.

D1 - 3.75Analog

D1-3.75

D1 (mm) =4

L(mm) =10

D1 - 5Analog

D1-5

D1

(mm) =5

L

(mm) =10

D1 - 6Analog

D1-6

D1

(mm) =6

L

(mm) =10

D1

L

TEMPORARY ABUTMENT


43/150

P15TEMPORARY ABUTMENTTemporary abutment for immediate loading.

Provided with a plastic cap.

Available in 3 hardness levels from the hardest to the softest and is connectedby a click to the abutment.

This abutment can be used for switch platform.

Developed by AB Dental R&D department in collaboration with Dr. Yehuda Gil.

P15Temporayabutmentforimmediate

loading P15-3.75,1 P15-3.75,2 P15-3.75,3 P15-3.75,4 P15-3.75,5 P15-3.75,6 P15-3.75,7

D

(mm) =3.75

D1

(mm) =4.7

L(mm) =4

LS(mm) =1, 2, 3,

4, 5, 6, 7

All abutments include a set of plastic capsP15a-1(hard)

D1

D

L

LS

P15a-2(medium)

P15a-3(soft)

TEMPORARY ABUTMENT


44/150

P3STEMPORARY PEEK ANATOMICA high performance, biocompatible thermoplastic polymer,

designed for medical device applications.


All abutments Includes short screwP3a

2 mm3 mm

D1

LS1

D

LS

L

P3S PEEKTemporaryPeek anatomicanti rotationabutment P3S-PEEK, 1 P3S-PEEK, 2 P3S-PEEK, 3

D

(mm) =3.75

D1

(mm) =4.7

L(mm) =7.5

LS(mm) =1, 2, 3

LS1(mm) =2, 3, 4


45/150

P4SANGULAR ANATOMIC TEMPORARY PEEKA high performance, biocompatible thermoplastic polymer,

designed for medical device applications.

Available in 150and 250for angular restorations.This abutment can be used for switch platform.

P4S-PEEK-15TemporaryPeek anatomic

P4S-PEEK, 15-1 P4S-PEEK, 15-2 P4S-PEEK, 15-3

D

(mm) =3.75

D1

(mm) =4.7

150

L

(mm) =9

LS(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

P4S-PEEK-25TemporaryPeek anatomic

P4S-PEEK, 25-1 P4S-PEEK, 25-2 P4S-PEEK, 25-3

D(mm) =3.75

D1(mm) =4.7

250

L

(mm) =9

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

D1

LS1

D

LS

L

All abutments Include short screw.

2 mm3 mm

P4a

IMPRESSION SLEEVE FOR CASTING


46/150

P2PLASTIC SLEEVEIntended for casting with no internal threading.

Available with or without a hex: With the hexagon, for structure on a single implant, or to set a crown or bridge onto

the abutment.

Without the hexagon, for multi implants tasks.

The P2WH sleeve can be used for switch platform.

P2N

Plastic Sleevew/FixationScrew -Rounded P2N-3.75, 15

D

(mm) =3.75

D1

(mm) =3.75

L

(mm) =15

P2NHPlastic Sleevew/FixationScrew -Straight w/Hex P2NH-3.75, 15

D

(mm) =3.75

D1

(mm) =3.75

L(mm) =15

P2WHPlastic Sleevew/FixationScrew -Wide w/Hex P2WH-3.75, 9

D(mm) =3.75

D1

(mm) =4.7

L

(mm) =9

All abutments Include short screw. Long screw is availableseparately. Abutments with at least 12 mm height (L)include as standard a long screw.

D

L

D1

7 mm6 mm2 mm3 mm

P3a P3al


47/150

P9GOLD COMPOSED ABUTMENTGold composed hex/non-hex abutment

This sleeve allows precise location on the implant and easy carving.Also available with a gold base without hex.


P9H

ComposedHex abutment

P9H-3.75, 11

D

(mm) =3.75

D1

(mm) =4.5

L

(mm) =11

LS

(mm) =1

P9HGGoldcomposedHex abutment

P9HG-3.75, 11

D

(mm) =3.75

D1

(mm) =4.5

L(mm) =11

LS(mm) =1

P9GGoldcomposednot-Hexabutment P9G-3.75, 11

D(mm) =3.75

D1

(mm) =4.5

L

(mm) =11

LS

(mm) =1All abutments Include short screw.Long screw is available separately.

D

L

LS

D1

7 mm6 mm2 mm3 mm

P3a P3al



48/150

P2-P3SSTRAIGHT ANATOMIC PLASTIC SLEEVEStraight anatomical Plastic Sleeve for casting with no internal threading.

This sleeve can be used for switch platform.

P2-P3SStraightanatomicPlasticSleeve

P2-P3S-3.75, 1 P2-P3S-3.75, 2 P2-P3S-3.75, 3

D

(mm) =3.75

D1

(mm) =4.7

L

(mm) =7.5

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

D

LS1

D1

LS

L

All abutments Include short screw.Long screw is available separately.

7 mm6 mm2 mm3 mm

P3a P3al


49/150

P2-P4SANGULAR ANATOMIC PLASTIC SLEEVEAngular anatomical Plastic Sleeve for casting with no internal threading.

This sleeve can be used for switch platform.

P2-P4S-15AngularanatomicPlasticSleeve

P2-P4S-3.75, 15-1 P2-P4S-3.75, 15-2 P2-P4S-3.75, 15-3

D

(mm) =3.75

D1

(mm) =4.7

150

L

(mm) =9

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

P2-P4S-25

AngularanatomicPlasticSleeve

P2-P4S-3.75, 25-1 P2-P4S-3.75, 25-2 P2-P4S-3.75, 25-3

D

(mm) =3.75

D1

(mm)

=4.7250

L

(mm) =9

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

D

LS1

L

LS


D1

2 mm3 mm

P4a

CEMENTED REHABILITATION


50/150

P3ANTI ROTATION ABUTMENTD1

D

L

P3 - 3.75Anti-rotation abutment

P3-3.75,5 P3-3.75,7 P3-3.75,9 P3-3.75,12 P3-3.75,15

D

(mm) =3.75

D1

(mm) =4.5

L

(mm) =5, 7, 9

12, 15

P3 - 5Anti-rotation abutment (forrestoration on wide implants ofminimum 5 mm diameter) P3-5,9

D

(mm) =3.75

D1

(mm) =5

L

(mm) =5, 7, 9

P3NNarrow anti-rotationabutment

P3N-3.75, 5 P3N-3.75, 7 P3N-3.75, 9

D

(mm) =3.75

D1

(mm) =3.75

L

(mm) =5, 7, 9

P3 Anti-rotation abutment

A straight titanium abutment with hex designed for permanent restoration.

P3N Narrow anti-rotation abutmentA straight titanium abutment with hex to be used where space is limited, between two

teeth or implants and narrow ridges.

P3W Wide anti-rotation abutment

A wide straight titanium abutment with hex to be used where wide space is available,

usually for back teeth.

P3S Anatomic anti-rotation abutment

Straight titanium abutment with hex designed to follow the shape of the gum line.

This abutment can be used for switch platform except P3N.


51/150

P3W

Wide anti-rotation abutment

P3W-3.75, 9 P3W-3.75, 12

D

(mm) =3.75

D1

(mm) =5.5

L

(mm) = 9, 12

P3SAnatomic anti-rotationabutment

P3S-3.75, 1 P3S-3.75, 2 P3S-3.75, 3

D

(mm) =3.75

D1

(mm) =4.5

L

(mm) =7.5

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

P3SWWide anatomicanti-rotation abutment

P3SW-3.75, 1 P3SW-3.75, 2 P3SW-3.75, 3

D(mm) =4

D1(mm) =5.5

L

(mm) =10.55

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

All abutments Include short screw. Long screw is available separately.Abutments with at least 12 mm height (L) include as standard a long screw.

7 mm6 mm2 mm3 mm

P3alP3a



52/150

P4ANGULAR ABUTMENTAn angular abutment of 15, 25, 35 and 45, designed for restoration on tilted implants.

This abutment can be used for switch platform except P4N.

P4Angularabutment

P4-3.75, 15 P4-3.75, 25 P4-3.75, 35 P4-3.75, 45

D

(mm) =3.75

D1(mm) =4.7

150, 250, 350, 450

L

(mm) 150, 250=9

L(mm) 350, 450=12,10

P4LLong Angular

abutmentP4L-3.75, 15 P4L-3.75, 25

D

(mm) =3.75

D1

(mm) =4.7

150, 250

L

(mm) =11

P4S -3.75,15Anatomicangularabutment 15

o

with shoulderP4S-3.75, 15-1 P4S-3.75, 15-2 P4S-3.75, 15-3

D

(mm) =3.75

D1

(mm) =4.7

150

L

(mm) =9

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

D

L

D1


53/150

P4S -

3.75, 25Anatomicangularabutment 25

o

with shoulder P4S-3.75, 25-1 P4S-3.75, 25-2 P4S-3.75, 25-3

D(mm) =3.75

D1(mm) =4.7

250

L

(mm) =9

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

P4NNarrowangularabutment 15

o

P4N-3.75, 15

D

(mm) =3.75

D1

(mm) =3.75

150

L

(mm) =9


2 mm3 mm

P4a

P3SZ ZIRCONIUM ANATOMIC ABUTMENT



54/150

P3SZ ZIRCONIUM ANATOMIC ABUTMENTA straight abutment composed of 99.8% Zirconium with titanium base.

Ideal for aesthetic solutions with strong and stable outcome.


P3SZZirconiumanatomicabutment

P3SZ-3.75, 1 P3SZ-3.75, 2 P3SZ-3.75, 3

D=

(mm) 3.75

D1(mm) =4.7

L(mm) =7.5

LS(mm) =1, 2, 3

LS1(mm) =2, 3, 4


D1

LS1

D

LS

2 mm3 mm

P3a

P4SZ ANGULAR ZIRCONIUM ABUTMENT


55/150

P4SZANGULAR ZIRCONIUM ABUTMENTAn angular abutment composed of 99.8% Zirconium with titanium base.

Ideal for aesthetic solutions with strong and stable outcome.


P4SZ-15ZirconiumAnatomicabutment

P4SZ-3.75, 15-1 P4SZ-3.75, 15-2 P4SZ-3.75, 15-3

D

(mm) =3.75

D1(mm) =4.7

150

L

(mm) =9

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

P4SZ-25ZirconiumAnatomicabutment

P4SZ-3.75, 25-1 P4SZ-3.75, 25-2 P4SZ-3.75, 25-3

D

(mm) =3.75

D1

(mm) =4.7

250

L

(mm) =9

LS

(mm) =1, 2, 3

LS1

(mm) =2, 3, 4

D1

D

LS1

L

LS


2 mm3 mm

P4a


56/150


57/150

P6H-bPlastic Sleevewithout Hex

P6H-b

D1(mm) =4.7

L

(mm) =10

P6H-bHPlastic Sleevewith Hex

P6H-bH

D1

(mm) =4.7

L

(mm) =10

P6H-bTTitaniumSleevewithout Hex

P6H-bT

D1

(mm) =4.7

L

(mm) =10

P6H-bTHTitaniumSleevewith Hex

P6H-bTH

D1

(mm) =4.7

L(mm) =10

All sleeves Include short screw.Long screw is availble separately.

7 mm6 mm

2 mm2.5 mm

P6a P6al

P7 ANTI ROTATION AESTHETIC ABUTMENT

SCREW-RETAINED REHABILITATION


58/150

An abutment with hex on both sides. Suitable for restorations on a single implant or a

screwed bridge on non-parallel implants. This abutment can be used for switch platform.

P7ANTI-ROTATION AESTHETIC ABUTMENT

P7Anti-rotationaestheticabutment P7-3.75, 1 P7-3.75, 2 P7-3.75, 3

D

(mm) =3.75

D1(mm) =4.7

L

(mm) =1, 2, 3

D2-P7Impressiontransfer

for P7 D2-P7

D1

(mm) =4.7

L

(mm) =12

D1-P7Analogfor P7

D1-P7

D

(mm) =4.5

L

(mm) =12

P7bPlasticSleevewithout Hex P7b

D

(mm) =4.05

D1

(mm) =6

L

(mm) =8.5

P7b-HPlasticSleevewith Hex P7b-H

D1

(mm) =4.7

L

(mm) =12

L

D1

D

D2-P7 transfer is availablewith D2-P7a screw.

16 mm

D2-P7a

All abutments IncludeP7-a screw accordingthe abutment heightsrespectively.P7a-1 P7a-2 P7a-3

11 mm 12 mm 13 mm

2 mm2 mm2 mm

P16 STRAIGHT ADAPTOR


59/150

P16STRAIGHT ADAPTORA straight adaptor made from titanium.

Facilitates the installation of an over denture system on nonparallel implants.

The upper cone solves the lack of parallelism.The impression-taking is performed over the installed adaptors.

The over denture system is screwed to the cone. Available in different heights.


P16Atraightadaptor

P16-3.75,1 P16-3.75,2 P16-3.75,3 P16-3.75,4 P16-3.75,5

D

(mm) =3.75

D1

(mm) =4.5

L

(mm) =2.2

LS

(mm) =1, 2, 3

4, 5

3 different sleeves for casting are availble with this abutment:

Plastic, titanium or gold

For specific details please refer to page 61

P14-bTP14-bGP14b

D1

D

L

P16 adaptor includes P14a screw.

2.5 mm

P14a

P12 FLAT CONNECTION ABUTMENT


ISSUED


60/150

P12FLAT CONNECTION ABUTMENT* Issued Patent by AB Dental.

The P12 patented system provides a comprehensive solution for temporary and permanent

restoration while retaining maximum precision. The abutment is used for screw retainedrestorations and enables restoration on non-parallel implants by cancelling the hex and

thereby cancelling the obstruction of the insertion path.


P12Flatconectionabutment

P12-3.75

D

(mm) =3.75

D1(mm) =4.5

L(mm) =5

P12-TTemporary Flatconectionabutment

P12-3.75-T

D(mm) =3.75D1

(mm) =4.5

L

(mm) =15

L1

(mm) =7

P12-T-LTemporary Flatconectionlong abutment

P12-3.75-T-L

D

(mm) =3.75

D1

(mm) =4.5

L

(mm) =15

L1

(mm) =11

D

D1

L

DPATENT

All abutments Include short screw. Long screw is available separately.Abutments with at least 12 mm height (L) include as standard a long screw.

7 mm6 mm2 mm3 mm

P3a P3al


61/150

In case of non-double platform implant, the P12C adaptor is available enabling the use of a flat connection abutment.

P12CAdaptor forflat conectionabutment P12C-3.75, 3

D(mm) =3.75D1

(mm) =3.75

L

(mm) =3

SC

=M 1.4

P12CAdaptor forflat conectionabutment P12C-3.75, 5

D

(mm) =3.75

D1(mm) =3.75

L

(mm) =5

SC

=NF 1.72

D2-P12Impressiontransfer forFlat connectionabutment D2-P12-3.75,9 D2-P12-3.75,15

D(mm) =3.75D1

(mm) =4.5

L(mm) =9,15

D2N-P12Narrowimpressiontransfer for P12 D2N-P12-3.75,9 D2N-P12-3.75,15

D

(mm) =3.75

D1

(mm) =3.75

L

(mm) =9,15

The P12c-3.75, 3includes P12Ca screw.

2.5 mm8 mm

P12ca

D2-P12 transfer is availablewith D2-P12ca or D2al screw.

16 mm16 mm

D2al D2-P12ca

P14 ANGULAR ADAPTOR


ISSUED


62/150

P14ANGULAR ADAPTOR* Issued Patent by AB Dental.

The adaptor (base & cone) enables rehabilitation on non-parallel implants by correcting

extreme angles of the implant. The angle of the implant is corrected by using a base.The cone enables connection of a temporary titanium abutment or permanent abutment

made with plastic sleeves for casting. This adaptor is a perfect solution for All on four

restorations. This abutment can be used for switch platform.

The cone should be tighten applying 30Nm of torque. The healing cap should be tighten

applying 20Nm of torque. This will ensure that at the time of removing the healing cap,

the cone wont be untightened as well.

P14-17Angularadaptor

P14-3.75, 17-1 P14-3.75, 17-3

D(mm) =3.75

D1(mm) =4.5

170

LS

(mm) =1, 3

LS1

(mm) =4, 5

P14-30Angularadaptor

P14-3.75, 30-1 P14-3.75, 30-3

D

(mm) =3.75

D1

(mm) =4.5

300

LS

(mm) =1, 3

LS1

(mm) =4, 5

D

LS

D1

LS1

P14 adaptor is available with P14a and P14e screws.

2 mm2.5 mm

P14a P14e

EDPATENT!


63/150

PO-P14Healing

cap for P14

PO-P14,3 PO-P14,5

D

(mm) =4.5

D1

(mm) =4.5

L(mm) =3, 5

D2-P14Imressiontransfer forangularadaptor D2-P14

D

(mm) =4.5

D1

(mm) =4.5

L

(mm) =11

D1-P14Analogfor P14

D1-P14

D1

(mm) =4.5

L

(mm) =2.2

P14bPlastic

Sleevefor angularadaptor P14b

D1(mm) =4.5

L

(mm) =10

P14-bTTitaniumSleeve forangularadaptor P14-bT

D1

(mm) =4.5

L

(mm) =12

P14-bGGold Sleevefor angularadaptor

P14-bG

D1

(mm)

=4.5L

(mm) =10

These sleeves are available with P14a screw.

2.5 mm

P14a

D2-P14 transfer is available

with D2-P14al screw.

16 mm

D2-P14al


P14 ANGULAR ADAPTOR ISSUED


64/150

Base for angular adaptor

P14ANGULAR ADAPTOR

P14base-17Base forangularadaptor

P14base, 17-1 P14base, 17-3

D

(mm) =3.75

D1

(mm) =4.5

170

LS

(mm) =1, 3

LS1(mm) =4, 5

P14base30Base forangularadaptor

P14base, 30-1 P14base, 30-3

D(mm) =3.75

D1

(mm) =4.5

300

LS

(mm) =1, 3

LS1

(mm) =4, 5

P5-P14Ball forangularadaptor

P5-P14, 1 P5-P14, 2

D

(mm) =4.5

D1

(mm) =4.5

L

(mm) =1, 2

PATENT!

P14 adaptor is available with P14a and P14e screws.

2 mm2.5 mm

P14a P14e


65/150

Casting sleeves option Packaging options

Complete

Ball attachment

Ball attachment option

P14c

P14e

P14d

P14e

P14Ca+P14c

P5-P14

(Heights 1, 2 mm)

P5-P14(Heights 1, 2 mm)

P5b

P5b

P5a

P5aP14d

P14b P14-bG P14-bTP14d+e+f

P14d+e+f

Driver

Driver

P24 ONE PIECE ANGULAR ADAPTOR



66/150

P24ONE PIECE ANGULAR ADAPTOR* Patent pending.

The adaptor (base & metal sleeve) is used for screw retained rehabilitation and enables

rehabilitation on non-parallel implants by correcting extreme angles of the implant.Available in angles of 17, 30, 45 and at heights of 1 mm and 3 mm.

This abutment can be used for switch platform. The product is marketed

with a complete screw.

P24 - 17

One pieceangularadaptor

P24-3.75, 17-1 P24-3.75, 17-3

D

(mm) =3.75

D1

(mm) =4.5

170

LS

(mm) =1, 3

LS1

(mm) =4, 5

P24 - 30One pieceangularadaptor

P24-3.75, 30-1 P24-3.75, 30-3

D

(mm) =3.75

D1

(mm) =4.5

300

LS

(mm) =1, 3

LS1

(mm) =4, 5

P24 - 45One pieceangularadaptor

P24-3.75, 45-1 P24-3.75, 45-3

D(mm) =3.75D1

(mm) =4.5

450

LS(mm) =1, 3

LS1(mm) =4, 5

D

LS

LS1

D1

P24 adaptor is available with P14a and P14e screws

2 mm2.5 mm

P14a P14e


67/150

D2 - P24Impressiontransfer forP24

D2-P24

D

(mm) =4.1x4.6

D1

(mm) =4

L(mm) =12

D1 - P24Analog for

P24

D1-P24

D

(mm) =4.1x4.6

D1

(mm) =4

L(mm) =12

P24bPlasticsleeve forone pieceangularadaptor P24b

D

(mm) =4.1x4.6

D1

(mm) =4

L

(mm) =12

P24 - bTTitanium

sleeve forone pieceangularadaptor P24bT

D

(mm) =4.1x4.6

D1

(mm) =4

L

(mm) =12

All sleeves include P14a screw.

2.5 mm

P14a

P5 BALL ATTACHMENT ABUTMENT

REMOVABLE DENTURE


68/150

P5BALL ATTACHMENT ABUTMENTThe ball attachment serves to connect a removable denture to an implant.

The abutment is provided with a stainless steel cap and silicon cap.

Silicon caps are available in three degrees of hardness, 1-3, from the hardest to the softest.


D

L

2.5mm

D1


69/150

P5Ball

attachmentabutment P5-3.75, 1 P5-3.75, 2 P5-3.75, 3 P5-3.75, 4 P5-3.75, 5 P5-3.75, 6

D

(mm) =3.75

D1

(mm) =4.5

L(mm) =1, 2, 34, 5, 6

P5aMetal cap

P5a

D

(mm) =5

L

(mm) = 3.2

P5bSilicon cap

P5b-1(hard)

P5b-2(medium)

P5b-3(soft)

D

(mm) =4

L

(mm) = 2.5

P5dProtectivedisk

P5d

P5 attachment is also availble as a set including metal and silicon caps.P5-3.75 P5a P5b

P5-20 ANGULAR BALL ATTACHMENT 20oREMOVABLE DENTURE


70/150

P5 20ANGULAR BALL ATTACHMENT 20* Issued Patent by AB Dental.

Multi-optional angular ball attachment, which is designed to connect a denture on tilted

implants. It provides the dentist a solution even at extreme angles.

The angular ball attachment arrives with a stainless steel cap and a silicon intermediate cap.

The silicon cap is available in three degrees of hardness 1- 3, from the hardest to the softest.

This unique abutment offers a solution for non-parallel implants. Its advantages are:

Excellent solution for non-parallel implants, for accurate joints on over

denture implants.

Enables adjustment of the angle at which the implant is positioned

This new design provides multiple solutions for difficulties in affixing and removing over

dentures, side pressures from other teeth / implants, prevents wear of ball attachment.This abutment can be used for switch platform.

P5-20Angular Ballattachment20

o

P5-3.75, 20-1 P5-3.75, 20-2 P5-3.75, 20-3 P5-3.75, 20-4 P5-3.75, 20-5 P5-3.75, 20-6

D

(mm) =3.75

D1

(mm) =4.5

200

L

(mm) =1, 2, 3

4, 5, 6

P5aMetal cap

P5a

D(mm) =5L

(mm) = 3.2

2.5mm

D1

D

L

ISSUEDPATENT!


71/150

P5bSilicon cap

P5b-1(hard)

P5b-2(medium)

P5b-3(soft)

D

(mm) =4

L

(mm) =2.5

P5dProtectivedisk

P5d

P5b

P5a

P5d

P5-20

PATENT!

P5-20 abutments Include P5-20a screw (available in heights1, 2, 3, 4, 5, 6mm). P5-20 attachment is also available as a setincluding metal and silicon caps.

7 mm

1.5 mm

P5-20a

P55LOW CONNECTOR

REMOVABLE DENTURE


72/150

P55 - The new innovative extremely small overdenture attachment system for easy

connection between the denture and the implants. The P55 opens up new possibilities

for restoration with overdentures considerably enhancing the quality of life of the patient.

Available in different heights: 1mm-8mm.

Advantages:

The reduced height enables the dentist to place an overdenture even in cases of

reduced interocclusal space.

High retention.

Simple and easy to use.

The P55 can be assembled with the regular abutment driver. No special instrument

is needed.


P55Low connector

P55-3.75, 1 P55-3.75, 2 P55-3.75, 3 P55-3.75, 4 P55-3.75, 5 P55-3.75, 6

D

(mm) =3.75

L

(mm) =0.5, 1.5,

2.5, 3.5, 4.5,

5.5, 6.5, 7.5

P55-3.75, 7 P55-3.75, 8

D

L


73/150

P55aMetal cap

P55a

D

(mm) =5

L

(mm) =3.2

P55bSilicon cap

P55b-1(hard)

P55b-2(medium)

P55b-3(soft)

D

(mm) =4

L

(mm) =2.5

P5dProtectivedisk

P5d

P55 attachment is also availble as a set including metal and silicon caps.P55 P55a P55b


74/150


75/150

NARROW PLATFORM(3mm diameter)

Products are sorted out inaccordance with treatmentsequence in the clinic

INDEXNARROW PLATFORM PROSTHETIC


76/150

Healing Cap

P0page 75

Impression

Transfer

D2page 76

D2Opage 76

Analog

D1page 77

Impression

sleeve for

castingP2N

page 78

P2NH

page 78

CementedRehabilitation

P3page 79

P3Wpage 79

P4page 80

Screw-

Retained

RehabilitationP16

page 81

Removable

Denture

P5page 82

P55page 83

P0TITANIUM HEALING CAP

HEALING CAP


77/150

The healing cap is set on the implant after it has been exposed, and remains

in the jaw until soft tissue (the gums) heal. Its function is to prepare the site for placing

the prosthetic device.

Selected height is a function of the thickness of the gums.

This healing cap can be used for switch platform.

P0TitaniumHealing Cap

P0-3,2 P0-3,3 P0-3,4 P0-3,5

D

(mm) =3

D1

(mm) =4

L

(mm) =2,3,4,5D

L

D1

D2TRANSFER

IMPRESSION TRANSFER


78/150

Hexagon Impression Transfer made of stainless steel and available for open tray and

closed tray.

D2Impressiontransfer (forclosed tray) D2-3, 9

D

(mm) =3

L

(mm) =9

D2OImpressiontransfer (foropen tray) D2O-3, 15

D

(mm) =3

L

(mm) =15

L

D

D2 transfers are available with D2a-3 or D2al-3 screws.(short screw for closed tray and long screw for open tray)

16 mm

7 mm

D2a-3 D2al-3

D1ANALOG

ANALOG


79/150

Made of stainless steel to allow preparation of laboratory models.

Available in 2mm diameter internal hexagon platform.

D1-3Analog

D1-3

D1(mm) =4

L

(mm) =12L

D1

D

P2PLASTIC SLEEVE



80/150

Intended for casting with no internal threading.

Available with or without a hex:

With the hexagon, for structure on a single implant,or to set a crown or bridge onto the abutment.

Without the hexagon, for multi implants tasks.

P2N

Plastic Sleevew/Fixationnarrow Screw -

straight P2N-3, 15

D

(mm) =3

D1

(mm) =3

L

(mm) =15

P2NH

Plastic Sleevew/Fixationnarrow Screw -Straight w/Hex

P2NH-3, 15

D

(mm) =3

D1

(mm) =3

L

(mm) =15

All abutments Include short screw. Long screw is availableseparately. Abutments with at least 12 mm height (L)include as standard a long screw.

7 mm6 mm2 mm3 mm

P3a P3al

D

L

D1

P3ANTI ROTATION ABUTMENT



81/150

P3 - Anti-rotation abutment

Straight titanium abutment with 2mm diameter hex to be used where space is limited,

between two teeth or implants and narrow ridges.

P3W - Wide anti-rotation abutment

Straight titanium abutment with hex to be used where wide space is available,

usually for back teeth.


P3Anti-rotationabutment

P3-3, 9

D

(mm) =3

D1(mm) =3

L

(mm) =9

P3WWide anti-rotationabutment

P3W-3, 9

D

(mm) =3

D1

(mm) =4

L

(mm) =9

L

D

D1

All abutments Includes short screw.P3a-3

2 mm3 mm


P4ANGULAR ABUTMENT


82/150

Offers a solution for rehabilitation on narrow implants.

A narrow angular abutment of 150and 250, designed for tilted implants.


P4Angularabutment 150

P4-3, 15 P4-3, 25

D

(mm) =3

D1

(mm) =4

150, 250

L

(mm) =8

All abutments Includes short screw.

L

DD1

2 mm3 mm

P4a-3

P16STRAIGHT ADAPTOR

SCREW RETAINED REHABILITATION


83/150

A narrow straight adaptor made from titanium.

Facilitates the installation of an over denture system on nonparallel narrow implants.

The upper cone solves the lack of parallelism.

The impression-taking is performed over the installed adaptors.The over denture system is screwed to the cone. Available in different heights.


P16Straightadaptor

P16-3, 1 P16-3, 2 P16-3, 3 P16-3, 4

D

(mm) =3

D1

(mm) =4.5

L

(mm) =1, 2, 3,

4

L

D1

D

P14-bTP14-bGP14b

3 different sleeves for casting are availble with this abutment:

Plastic, titanium or gold

For specific details please refer to page 61

P5BALL ATTACHMENT ABUTMENT

REMOVABLE DENTURE


84/150

The ball attachment serves to connect a removable denture to a narrow implant.

The abutment is provided with a stainless steel and silicon cap.

Silicon caps are available in three degrees of hardness, 1-3, from the hardest to the softest.


P5Ballattachmentabutment P5-3, 1 P5-3, 2 P5-3, 3 P5-3, 4 P5-3, 5 P5-3, 6

D

(mm) =3

L

(mm) =1, 2, 3

4, 5, 6

P5 Narrow attachment is also available as a set including metal and silicon caps.

L

2.5 mm

D

P5-3 P5a P5b

P55LOW CONNECTOR DIAMETER 3


85/150

L

D

The new innovative extremely small overdenture narrow attachment system for easy

connection between the denture and the implants. The narrow P55 opens up new possibilities

for restoration with overdentures considerably enhancing the quality of life of the patient.

Available in different heights: 1mm-4mm. This abutment can be used for switch platform.

P55Lowconnectordiameter 3 P55-3, 1 P55-3, 2 P55-3, 3 P55-3, 4

D

(mm) =3

L(mm) =0.5, 1.5,

2.5, 3.5

P55aMetal cap

P55a

D

(mm) =5

L

(mm) = 3.2

P55bSiliconcap P55b-1

(hard)P55b-2

(medium)P55b-3(soft)

D

(mm) =4

L

(mm) =2.5

P5dProtectivedisk

P5d

P55 Narrow attachment is also available as a set including metal and silicon caps.P55-3 P55a P55b


86/150


87/150

INDEXONE PIECE IMPLANT


88/150

Impression

Transfer

D2-I6page 87

Analog

D1-I6page 88

D1-I6bpage 88

D2TRANSFER

IMPRESSION TRANSFER


89/150

D2-I6Impressiontransfer forI6 implant D2-I6

D

(mm) =4

L

(mm) =10

Hexagon Impression Transfer made of stainless steel and available

for open tray and closed tray.

L

D

D1ANALOG

ANALOG


90/150

Made of stainless steel to allow preparation of laboratory models.

D1-I6bImplant

analog

D1-I6b

D

(mm) =4

D1

(mm) =3

L

(mm) =18

D1-I6Implantanalog

D1-I6

D(mm) =2.4

D1(mm) =4

L

(mm) =12

L

D

PROSTHETIC KIT

PKPROSTHETIC KIT


91/150

PK-D2

Plastic Transfer

PK-P0

Healing Cap

PK-P2

Plastic ConicalSleeve

PK-P2H

Plastic ConicalSleeve

PK-P3-1

Anatomic Anti rotation Abutment

AB-Dental Prosthetic Kit offers the professional an easy solution

in one small packaging.

It is the perfect solution for impression and transfer techniques,

both for a single crown and bridge restoration.This kit enables the professional to take a closed-tray impression with the benefits of open-tray.

AB-Dental Prosthetic Kit makes the restoration process as simple as possible; eliminating any

necessary adjustments and giving the professional a complete set of tools with no need for

additional parts.

Available in 4 different heights (1-4) in both platforms:

standard-3.75mm and narrow-3mm.

The kit is marketed in packaging of tenth.

PK-D1

Implant analog


92/150


93/150

91

TOOLS & ACCESSORIES

STRAIGHT DRILLSAll t i ht d ill l il bl ith t i t l i i ti

DRILLS


94/150

92

All straight drills are also available without internal irrigation.

TMDI-1.9

1.9 Marker Drill Bitwith irrigation

TPDI-2.0

2 Pilot Drill Bitwith irrigation

TDI-2.5

2.5 Drill Bitwith irrigation

TDI-2.8


TDI-3.2


TDI-3.65


16mm

13mm11.5mm10mm

8mm

6mm


95/150

93

TDI-4.0


TDI-4.5


TDI-5.0


TDI-5.5


TDE-I

Drill extensionBit with irrigation

SHORT DRILLSDRILLS

All short drills are also available without internal irrigation.


96/150

94

TPDSI-2.0

Short Drill bit

with irrigation

TDSI-3.65

Short Drill bit

with irrigation

TDSI-2.5

Short Drill bit

with irrigation

TDSI-4.0

Short Drill bit

with irrigation

TDSI-2.8

Short Drill bit

with irrigation

TDSI-4.5

Short Drill bit

with irrigation

TDSI-3.2

Short Drill bit

with irrigation

TDSI-5.5

Short Drill bit

with irrigation

All short drills are also available without internal irrigation.

11.5mm10mm

8mm

6mm

LONG DRILLS


97/150

95

TDLI-2.5

Long Drill bit

with irrigation

TDLI-3.2

Long Drill bit

with irrigation

TDLI-3.65

Long Drill bit

with irrigation

TDLI-4.2

Long Drill bit

with irrigation

20mm

18mm

16mm

CONICAL DRILLSDRILLS

All conical drills are also available without internal irrigation (except TDCI-6.5 & TDCI 7.5).


98/150

96

TPDCI-2.0

2 Pilot

Conical Drill Bitwith irrigation

TDCI-2.2

2.2mm


TDCI-2.7

2.7mm


TDCI-3.3

3.3mm


TDCI-3.7

3.7mm


TDCI-4.0

4.0mm


TDCI-4.5

4.5mm


g p

16mm

13mm11.5mm10mm

8mm

6mm


99/150

97

TDCI-7.5,11.5

7.5mm,

Length 11.5mmConical Drill Bitwith irrigation

TDCI-7.5,10

7.5mm,

Length 10mmConical Drill Bitwith irrigation

TDCI-7.5,8

7.5mm,


TDCI-6.5,11.5

6.5mm,

Length11.5mmConical Drill Bitwith irrigation

TDCI-6.5,10

6.5mm,


TDCI-6.5,8

6.5mm,

Length 8 mmConical Drill Bitwith irrigation

TDCI-5.5

5.5mm


SHORT DRILLS FOR I15DRILLS


100/150

98

TDI-I15, 4.5

Drill Bitwith irrigation

TDI-I15, 5.5


TDI-I15, 6.5


TDI-I15, 7.5


COUNTER SINK TREPHINE


101/150

99

TDCS-3.75-4.2

Counter Sink

TDCS-5-6

Counter Sink

TDIT-3.0

Trephine

TDIT-4.0

Trephine

TDIT-5.0

Trephine

fl 3.6 fl 4.8

fl 4.2 fl 5.8

16mm

13mm

11.5mm10mm8mm6mm

fl 3.0/4.0 fl 4.0/5.0 fl 5.0/6.0

DRIVERS

AB Dentals drivers and tools are made of surgical stainless steel and precisely designed to fit perfectly

DRIVER FOR IMPLANT PLACEMENT


102/150

100

T3-2,9

T1-1.2,9 T1-1.8,9

T3-2.4,9T3-I6T3-2,18

Ratchet Hex Driver for Implant

T1-1.2,15

Ratchet Hex Driver for Abutment

T1-1.8,15

Ratchet Hex Driver for P6

T3 2.4,18


T3-I6L


our implants and prosthetics, while ensuring the parts remain together in the patients mouth.

DRIVER TO TIGHTEN ABUTMENT

HAND DRIVER TO TIGHTEN ABUTMENT


103/150

101

T2-1.2,9

Hand Hex Driver for Abutment

T5-2.4,20

Contra Angle Driver for implant

T5-2.4,25T5-2,20


T5-2,25

T2-1.2,15 T2-1.8,9

Hand Hex Driver for P6

T2-1.8,15

CONTRA ANGLE DRIVER

T5-1.2,26T5-1.2,21

Contra Angle Driver for abutment

DRIVERS

PARALLELING PIN RETRIEVING SCREW


104/150

102

TP-23TP-17

Parallel Pin

T4

Retrieving Screw

PROFESSIONAL IMPLANTOLOGY TOOLS

T8c-10-40Ratchet-TorqueCombination

T8RatchetWrench

T10Handle

T11Mallet

T12AbutmentGripper

T13TechniciansHandle

T17TissuePunch Driver

T9DepthGauge

SURGICAL KITS

TK SINUSSINUS LIFT KITAB Dentals sinus kit includes spoons of various angles for lifting

the sinus membrane during open sinus lift procedure


105/150

103

Tsinus-0Light Blue SinusLift Instrument

Tsinus-1Green SinusLift Instrument

Tsinus-2Red SinusLift Instrument

Tsinus-3Black SinusLift Instrument

Tsinus-4Silver SinusLift Instrument

Tsinus-5Pink SinusLift Instrument

Tsinus-6PurpleSinusLift Instrument

Tsinus-7Gold SinusLift Instrument

the sinus membrane during open sinus lift procedure.

Width: 17cm

Length: 23cmHeight: 4cm

SURGICAL KITS

TK OSTEOOSTEOTOMES KIT/STRAIGHTThe osteotome is a device for lifting the sinus membrane during closed sinus lift procedure.

AB Dentals osteotomes kit offers these devices as a straight or angle instruments in various


106/150

104

T-ost-2-2.8straightosteotome

T-ost-2.8-3.2straightosteotome




AB Dental s osteotomes kit offers these devices as a straight or angle instruments in various

diameters.

Width: 17cmLength: 23cm

Height: 4cm

TKA OSTEO OSTEOTOMES KIT/ANGULARThe osteotome is a device for lifting the sinus membrane during closed sinus lift procedure.

AB Dentals osteotomes kit offers these devices as a straight or angle instruments in various


107/150

105

T-ostA-2-2.8AngularOsteotome

T-ostA-2.8-3.2AngularOsteotome




AB Dental s osteotomes kit offers these devices as a straight or angle instruments in various

diameters.

Width: 17cmLength: 23cm

Height: 4cm

SURGICAL KITS

TKS/TKSICOMPACT ORGANIZED KITFull small kit of drills with or without internal irrigation.


108/150

106

Width: 8cm

Length: 10cm

Height: 5cm

T5-2.4,25Contra AngleDriver for implant

TP-23ParallelPin (x2)

T8RatchetWrench

T3-2,18

Ratchet HexDriver forImplant


T3-2.4,9 T3-2.4,18


109/150

107

TPD-2.0 2 Pilot Drill Bit

TMD-1.91.9 MarkerDrill Bit

TD-3.65 3.65 Drill Bit






T1-1.2,15T1-1.2,9


T2-1.2,15T2-1.2,9


SURGICAL KITS

TKSC/TKSCICOMPACT ORGANIZED CONICAL KITFull conical small kit of drills with or without internal irrigation.


110/150

108

Width: 8cm

Length: 10cm

Height: 5cm

T5-2.4,25Contra AngleDriver for implant

TP-23Parallel Pin(x2)

T8RatchetWrench

T3-2,18

Ratchet HexDriver forImplant


T3-2.4,9 T3-2.4,18


111/150

109

TDC-2.2 2.2 ConicalDrill Bit







TPDC-2.0 2 Pilot ConicalDrill Bit

T1-1.2,15T1-1.2,9


T2-1.2,15T2-1.2,9


SURGICAL KITS

TKM/TKMIMEDIUM ORGANIZED KITFull medium kit of drills with or without internal irrigation.

Width: 14cm


112/150

110

Width: 14cm

Length: 19cm

Height: 5cm

T5-2.4,20


T5-1.2,21

Contra AngleDriver forabutment

TP-23

ParallePin (x4)

T8

Ratchet Wrench

T3-2.4,9T3-2,18T3-2,9

Ratchet Hex Driver for Implant Ratchet Hex Driver for Implant

T3-2.4,18

T5-2.4,25


113/150

111

TPD-2.0

2 PilotDrill Bit

TD-3.65

3.65Drill Bit

TD-2.5

2.5Drill Bit

TD-2.8

2.8Drill Bit

TD-4.0

4.0Drill Bit

TD-4.5

4.5Drill Bit

TD-E

DrillingExtension Bit

TD-5

5Drill Bit

TD-5.5

5.5Drill Bit

TD-3.2

3.2Drill Bit

T1-1.2,15T1-1.2,9


T2-1.2,15T2-1.2,9


TMD-1.9

1.9 MarkerDrill Bit

SURGICAL KITS

TKMI-T8CMEDIUM ORGANIZED KITFull medium kit of drills with internal irrigation and T8C ratchet.

Width: 14cm


114/150

112

Length: 19cm

Height: 5cm

T5-2.4,20

Contra Angle Driver forimplant

T5-1.2,21

Contra AngleDriver forabutment

TP-23

ParallelPin (x4)

TDCS-5-6

CounterSink

TDCS-3.75-4

CounterSink

T8C-10-40

Ratchet-TorqueCombination

T3-2.4,9

Ratchet Hex Driver forImplant

T3-2.4,18 T5-2.4,25


115/150

113

T3-2,18

TMDI-1.9

1.9

MarkerDrill Bit withirrigation

TPDI-2.0

2 Pilot

Drill Bitwithirrigation

TDI-4.0

4.0


TDI-2.8

2.8


TDI-3.2

3.2


TDI-2.5

2.5


TDI-4.5

4.5


TDI-5.0

5.0


TDI-5.5

5.5


TDE-I

Drill

extensionBit withirrigation

TDI-3.65

3.65


T1-1.2,15T1-1.2,9


T2-1.2,15T2-1.2,9


T3-2,9



116/150


117/150

115

T1-1.2,15T1-1.2,9


T2-1.2,15T2-1.2,9


TDC-2.2

2.2 ConicalDrill Bit

TDC-3.3


TDC-3.7


TDC-5.5


TD-E

DrillingExtension Bit

TDC-4.0


TDC-4.5


TDC-2.7


TPDC-2.0

2 PilotConicalDrill Bit

SURGICAL KITS

TKD/TKDI DRILLS KIT WITH STOPPERFull stopper drill kit with or without internal irrigation

(stopper drill bit).


118/150

116

Width: 8cm

Length: 10cmHeight: 5cm

TDSt-2.8,6

Diameter

2.8mmLength6mm

TDSt-2,11.5

Diameter2mm Length11.5mm

TDSt-2,13

Diameter2mm Length13mm

TDSt-2.8,13

Diameter

2.8mmLength13mm

TDSt-2.8,8

Diameter

2.8mmLength8mm

TDSt-2,6


TDSt-2.8,10

Diameter

2.8mmLength10mm

TDSt-2,8


TDSt-2.8,11.5

Diameter

2.8mmLength11.5mm

TDSt-2,10



119/150

SURGICAL KITS

TKDC CONICALDRILLS KIT WITH STOPPERFull conical stopper drill kit without internal irrigation.

Width: 8cm


120/150

118

Length: 10cm

Height: 5cm

TDCSt-2.2,6

ConicalStopperDrill

TDCSt-2.7,6

ConicalStopperDrill

TDCSt-2.7,8

ConicalStopperDrill

TDCSt-2.7,10

ConicalStopperDrill

TDCSt-2.7,11.5

ConicalStopperDrill

TDCSt-2.7,13

ConicalStopperDrill

TDCSt-2.2,8

ConicalStopperDrill

TDCSt-2.2,10

ConicalStopperDrill

TDCSt-2.2,11.5

ConicalStopperDrill

TDCSt-2.2,13

ConicalStopperDrill


121/150

119

TDCSt-3.3,6

ConicalStopperDrill

TDCSt-3.3,8

ConicalStopperDrill

TDCSt-3.3,10

ConicalStopperDrill

TDCSt-3.3,11.5

ConicalStopperDrill

TDCSt-3.3,13

ConicalStopperDrill

TDCSt-3.7,6

ConicalStopperDrill

TDCSt-4.0,6

ConicalStopperDrill

TDCSt-4.0,8

ConicalStopperDrill

TDCSt-4.0,10

ConicalStopperDrill

TDCSt-4.0,11.5

ConicalStopperDrill

TDCSt-4.0,13

ConicalStopperDrill

TDCSt-4.5,6

ConicalStopperDrill

TDCSt-4.5,8

ConicalStopperDrill

TDCSt-4.5,10

ConicalStopperDrill

TDCSt-4.5,11.5

ConicalStopperDrill

TDCSt-4.5,13

ConicalStopperDrill

TDCSt-3.7,8

ConicalStopperDrill

TDCSt-3.7,10

ConicalStopperDrill

TDCSt-3.7,11.5

ConicalStopperDrill

TDCSt-3.7,13

ConicalStopperDrill

BONE GRAFT & MEMBRANE

BioFill-SBioFill-S is a revolutionary artificial bone substitute; BioFill-S may be applied in a variety of

surgeries involving bone fracture, craniofacial surgery, spine plastic or oral surgery.


122/150

120

Features:

Synthetic resorbable bone-graft. Composed of 100% B-TCP.

An osteoconductive material, which regenerates bone defects in the entire skeletal system.

Composed of a 3D space system that enables the growth of the bone.

Works well under wet conditions, low dissolving into blood and body fluids.

Absorption time: 6 months.

Lot. No. BIOFILL-1g-s BIOFILL-1g-l BIOFILL-3g-s BIOFILL-3g-l

Particle Size (mm) 0.5-1 1-2 0.5-1 1-2

Content (cc) 1 1 3 3

BioSeal-SBioSeal-S is an absorable collagen membrane intended for use during guided bone

regeneration (GBR) and guided tissue regeneration (GTR) procedure.


123/150

121

Features:

Made of collagen type 1 to minimize antigenicity.Sponge surface to allow the ingrowth of bone forming cells.

Film surface to prevent the ingrowth of fibrous tissue into the bone defect.

Absorption time: 4 months.

Lot. No. BIOSEAL-S-1.5*2 BIOSEAL-S-1.5*3 BIOSEAL-S-2.5*2.5 BIOSE AL-S- 3*4

Size (mm) 15*20 15*30 25*25 30*40

ABCEMRESIN CEMENTNon-Eugenol Resin Cement for Implant Retained Crowns.

Provides a tight adherence and holds the crown in a hard setting that can be reversible.

Its high elasticity compensates for the lost PDL, absorbing some of the occlusal forces.

A l h b h h l d b l


124/150

122

As a result, the abutment screw has a much lower tendency to become loose.

Available in a self-mixing dispenser.The kit contains one 5ml syringe, one mixing pad and ten mixing tips.

Aimed for all cemented rehabilitation but the Zirconium.

TLJTRANSPARENT LOWER JAWSTransparent plastic model of the lower jaw, illustrating implants and rehabilitation

components.

ABSHINE ZIRCONIUM KITExceptional array of burs designed to treat zirconium abutments and prevent cracking

thereof. The burs benefit from a high level of roughness due to the variety of grains sizes.

This roughness assists in maintaining low temperature.

Th i t f b f ilit t th d t l


125/150

123

The variety of burs facilitates the doctor s leeway:

PR15 Pointed head burs for inter proximal preparation.K2, PR2 Versatile burs for all abutments aspects.

A3, A4 Rounded head burs for preparation of the abutments top corners.

T2, E5, E7 Burs for abutment preparation above the anatomic level.

PR15A3 A4 K2E7 T2E5 PR2

ABPhysio MOTOR SYSTEM FOR IMPLANTOLOGNew AB Dental MD 11 Motor System for Implantology with sophisticated motor control

for smooth and precise power delivery in any speed range.

Motor speed range of 300 40000 rpm.


126/150

124

70 Ncm of maximum torque at 20:1 Contra Angle with graphical, real time torque control

on display - (with or without LED - optional) with internal/external cooling system Sturdy, high quality finish.

Integrated pump system for cooling to prevent tissue damage.

The new AB Dental MD 11 Motor System, is developed with the intention to put extra

smoothness into your hands. The further development of its electronic motor and

a sophisticated motor control are key players in this product. This reflects also the new

design with smooth edges for easy cleaning and a display that gives you all the information

at a glance. Single function keys with haptic and audible feedback guarantee for accurate

device setup.

Inserting and changing of tube sets is carried out effortless by a front access push button

and tube compartment. The tube bracket swings out and stays in plain sight while the tube

set is positioned between the two notches of the bracket.

A broad variety of extensions and accessories is provided and can anytime be added.

Included in delivery:

AB Dental MD 11 control unit

Electronic Vario pedal

Electronic Motor

Sterile tube set, 2 m

Clip set for tube set mount

Stand for irrigation fluid

I

I

l


127/150

125

Handpiece cradle

User Manual MD 11 in

5 languages on CD-ROM

2028 AB MD 11, brushless single motor system,

40,000 rpm consists of:

1 x Control unit MD 11 (3335) with 1 micromotors socket,

irrigation pump on the top surface of the housing, socket for

Vario-pedal

1 x Contra-angle 20:1 (with or without LED optional) with

internal/external cooling system (5052)

1 x Electronic motor 21, 40,000 rpm, with cable 2 m,

autoclaveable, metal plug (2097)

1 x Vario-foot control IP 68 (1866), electronic, suitable

for operating theatre

1 x Single tubing set (1706), disposable, sterile, 2 m

1 x Bottle holder (1770)

2 x Spray nozzle attachment for NOU-CLEAN (1942 / 1958)

1 x Cooling fluid flask NaCl 0.9 %, 1lt (1696)

I

I I

I

l

I

I I

I

I

I

l

l

20:1 LED

CONTRA ANGLE

20:1 CONTRA

ANGLE


128/150


129/150

127

GUIDEDSERVICE

GUIDEDSERVICEAbout the service

A unique, exclusive and patented (pending) service that enables the dentist, at the click of a button

on his computer, to plan a precise implantation procedure from the clinic. A Surgical Guide can be


130/150

128

produced digitally from this 3D plan, that brings the virtual plan to the mouth.

ABGuidedService will prepare a treatment plan according to the dentist instructions, and present

the dentist 2D and 3D images in the ABDenpax web-based technology.

Dentist can view the plan, consult with colleagues or the dental laboratory (as the location of the

restorations can be seen in the virtual plan) and either request changes to be made to the plan or

approve the plan.

After the treatment plan is approved by the dentist, a surgical guide is manufactured digitally,

directly from the planning software.

ABGuidedService is designed specifically for users of AB Implants. The process is easy and

enables the dentist to produce surgical guides for even a single implant.

There is no need to install software and to learn how to use it. ABGuided and ABDenpax provide

this service to the dentist, with all the images needed to view the plan.

The ABGuided Drill Kit provides all the

Date post:	02-Jun-2018
Category:	Documents
Upload:	ahmadmodi
View:	216 times
Download:	0 times

AB Catalogue 2013

Documents