Low voltage general performance motorsM2000 Cast lron Frames
ABB motors
We provide motors and generators, services and expertiseto save energy and improve customers’ processes over the total lifecycle of our products, and beyond.
02 M2QA Motors ABB LV Motors
Industrial
As a key element of its business strategy, ABB has committed to a broadprogram of product development and positioning under the Industrial IT
umbrella. This initiative is geared towards increasing integration of ABBproducts as the “building blocks” of larger solutions, while incorporatingfunctionality that will allow multiple products to interact seamlessly ascomponents of real-time automation and information systems.
Motors and generators represent one of the fundamental building blocksin the Industrial IT architecture.
ABB (www.abb.com) is a leader in power and automation technologiesthat enable utility and industry customers to improve performance whilelowering environmental impacts. The ABB Group of companies operatesin around 100 countries and employs about 107,000 peoples.
The Leader in Motors
ABB is a global engineering and technology group serving customersin electrical power generation; transmission and distribution; automation;oil, gas and petrochemicals; industrial products and contracting; andfinancial services. The product range includes a full range of industrialelectric motors, both AC and DC, LV and HV meeting the needs of mostapplication, with virtually any power rating.
Within the Group, ABB Motors is the world’s leading manufacturer oflow-voltage induction motors, having over 100 years experience and apresence in more than 100 countries. ABB Motors’s broad understandingof customer applications enables it to work closely to solve individualproblems or to supply custom-designed motors for any project-no matterhow demanding.
For customers, this all represents a solid value and commitment revealedin the dependable quality of ABB Motor’s products and in its unrivalledcustomer service and back up. The hallmarks of its products are efficiency,robustness and reliability, combined to represent the best value available.Customers the world over rely on ABB Motors as the most solid andreliable supplier of electric motors. But above all, ABB Motors values itscustomers.
The best value is also enhanced by ABB Motors’s worldwide customerservice network guaranteeing fast delivery, rapid response and localback-up, as well as by worldwide ABB Service network supporting theafter sales service.
ABB Motors has manufacturing facilities in Finland, Italy, Spain, Sweden,China and India. The comprehensive Motor stocks at each of these sitesare reinforced by large and versatile stocks at Central Stock Nordic inVasteras, Sweden; Central Stock, Europe in Menden, Germany andCentral Stock Asia in Singapore, and by numerous distribution stocks.
Making you more competitive
ABB has been manufacturing motors for over 100 years. Our productsare designed to be reliable, efficient and cost effective, and we can supplymotors for practically any application. A full range of services is availablethrough our worldwide service organization, with the latest eBusinesssystems providing round-the-clock access, easy ordering and fast delivery.
M2000 motors
Our M2000 range offers quality motors in the eff2 class, providing youwith the ideal efficiency level for your needs. And our 24-hour availabilityhelps make your life easier. Through our extended support and servicessuch as eBusiness solutions and an efficient global stock concept, weprovide you with easy ordering and quick delivery.
ABB LV Motors M2QA Motors 03
Technical featuresThe new M2QA series of three phase induction motors are a member ofthe ABB M2000 family with EU efficiency class. The motors are designedand manufactured according to the international standards of IEC34,IEC72, DIN432673, BS4999, AS1359, GB10069, and Q/JBQS27.The electrical and mechanical performances of ABB M2QA motors areexcellent and keeping long.
High efficiencyThe output power 1.1kW-90kW 2P and 4P, in S1 duty, M2QA motorsare among the class 2 of CEMEP-EU standard, saving energy andoperating costs.
Voltage ranges of extra versatilityA wide range of voltages can be up to max. 690 V for 50 Hz and 60 Hzavailable.
Reliable windingsTo ensure long lifetime, the windings are made of the latest availablematerials in class F protection and temperature rise limited to class B(80k) in standard motors.
Bearings with high load capacityAll motors are provided with deep-groove ball bearings as standard andthey are designed for long lifetime is extended. Cast iron motors in sizes71-225 are greased for life and motors in sizes 250-355 have a regreasingdevice as a standard.
Strong corrosion protectionThe motors are made to withstand aggressive environment as stan-dard and they are designed for long lifetime. For motors with regreasing,they have strong and effective protection against corrosion.
Low niose levelAn important objective in our design work is to minimize the noise level.And we have been successful.
Additional windings protectionFix thermistors(PTC), them-switches, anti condensation heaters onrequest.
International motor efficiency standardsA worldwide energy efficiency classification system now exists for low voltage three-phase asynchronous motors. This system increases the level of harmonization in efficiency regulations around the world.
International Electrotechnical Commission (IEC) standard IEC/EN 60034-30:2008 defines energy-efficiency (IE code) classes for single speed, three-phase, 50 and 60 Hz induction motors. The standard is part of an effort to unify motor testing procedures and efficiency and product labeling requirements to enable motor purchasers worldwide to easily recognize premium efficiency products. The efficiency levelsdefined in IEC/EN 60034-30 are based on test methods specified in
IEC/EN 60034-2-1:2007.Efficiency testing standad IEC/EN 60034-2-1:2007 Direct methodIndirect method:- Measurement; PLL calculated from load tests- Estimation; PLL at 2.5% – 1.0% of input power at rated load between 0.1 kW and 1000 kW- Mathematical calculation; Eh star – alternative indirect method with mathematical calculation of PLLWinding losses in stator and rotor determined at [25°C + actual temperature rise measured]To promote transparency in the market, IEC 60034-30 states that both the efficiency class and efficiency value must be shown on the motor rating plate and in product documentation. The documentation must clearly indicate the efficiency testing method used as the different methods can produce differing results.
IEC/EN 60034-2-1:2007IEC/EN 60034-2-1, which came into force in September 2007, introducesnew rules concerning the testing methods to be used for determining losses and efficiency.It offers two ways of determining efficiency; the direct and indirect methods. The standard specifies the following parameters for determining efficiency using the indirect method:−reference temperature −three options for determining PLL (additional load losses): measurement, estimation and mathematical calculation.The resulting efficiency values differ from those obtained under the previous IEC testing standard, IEC 60034-2:1996. It must be noted that efficiency values are only comparable if they are measured usingthe same method.
− reference temperature − three options for determining PLL (additional load losses): measurement, estimation and mathematical calculation.
The resulting efficiency values differ from those obtained under the previous IEC testing standard, IEC 60034-2:1996. It must be noted that efficiency values are only comparable if they are measured using the same method.
Efficiency testing standad IEC/EN 60034-2-1:2007
Direct methodIndirect method:- Measurement; PLL calculated from load tests- Estimation; PLL at 2.5% – 1.0% of input power at rated load between 0.1 kW and 1000 kW- Mathematical calculation; Eh star – alternative indirect method with mathematical calculation of PLL
Winding losses in stator and rotor determined at[25°C + actual temperature rise measured]
IEC/EN 60034-30:2008IEC/EN 60034-30:2008 defines three International Efficiency (IE) classes for single speed, three-phase, cage induction motors.− IE1 = Standard efficiency (EFF2 in the former European classification scheme) − IE2 = High efficiency (EFF1 in the former European classification scheme and identical to EPAct in the USA for 60 Hz) − IE3 = Premium efficiency (identical to "NEMA Premium" in the USA for 60 Hz) − IE4 = A future level above IE3
Efficiency levels defined in IEC/EN 60034-30 are based on test methods specified in IEC/EN 60034-2-1:2007.
Compared to the former European efficiency classes defined by the CEMEP agreement the scope has been expanded.
IEC/EN 60034-30 covers almost all motors (for example standard, hazardous area, marine, brake motors)
− Single speed, three-phase, 50 Hz and 60 Hz − 2-, 4- or 6-pole − Rated output from 0.75 to 375 kW − Rated voltage UN up to 1000 V − Duty type S1 (continuous duty) or S3 (intermittent periodic duty) with a rated cyclic duration factor of 80 % or higher − Capable of operating direct online
The following motors are excluded from IEC 60034-30:
− Motors made solely for converter operation − Motors completely integrated into a machine (for example, pump, fan or compressor) that cannot be tested separately from the machine
04 M2QA Motors ABB LV Motors
Below lowest IE classification
Outputkw
IE1 IE2 IE3
2 pole 4 pole 6 pole 2 pole 4 pole 6 pole 2 pole 4 pole 6 pole0.75 72.1 72.1 70.0 77.4 79.6 75.9 80.7 82.5 78.91.1 75.0 75.0 72.9 79.6 81.4 78.1 82.7 84.1 81.01.5 77.2 77.2 75.2 81.3 82.8 79.8 84.2 85.3 82.52.2 79.7 79.7 77.7 83.2 84.3 81.8 85.9 86.7 84.33 81.5 81.5 79.7 84.6 85.5 83.3 87.1 87.7 85.64 83.1 83.1 81.4 85.8 86.6 84.6 88.1 88.6 86.85.5 84.7 84.7 83.1 87.0 87.7 86.0 89.2 89.6 88.07.5 86.0 86.0 84.7 88.1 88.7 87.2 90.1 90.4 89.111 87.6 87.6 86.4 89.4 89.8 88.7 91.2 91.4 90.315 88.7 88.7 87.7 90.3 90.6 89.7 91.9 92.1 91.218.5 89.3 89.3 88.6 90.9 91.2 90.4 92.4 92.6 91.722 89.9 89.9 89.2 91.3 91.6 90.9 92.7 93.0 92.230 90.7 90.7 90.2 92.0 92.3 91.7 93.3 93.6 92.937 91.2 91.2 90.8 92.5 92.7 92.2 93.7 93.9 93.345 91.7 91.7 91.4 92.9 93.1 92.7 94.0 94.2 93.755 92.1 92.1 91.9 93.2 93.5 93.1 94.3 94.6 94.175 92.7 92.7 92.6 93.8 94.0 93.7 94.7 95.0 94.690 93.0 93.0 92.9 94.1 94.2 94.0 95.0 95.2 94.9110 93.3 93.3 93.3 94.3 94.5 94.3 95.2 95.4 95.1132 93.5 93.5 93.5 94.6 94.7 94.6 95.4 95.6 95.4160 93.7 93.8 93.8 94.8 94.9 94.8 95.6 95.8 95.6200 94.0 94.0 94.0 95.0 95.1 95.0 95.8 96.0 95.8250 94.0 94.0 94.0 95.0 95.1 95.0 95.8 96.0 95.8315 94.0 94.0 94.0 95.0 95.1 95.0 95.8 96.0 95.8355 94.0 94.0 94.0 95.0 95.1 95.0 95.8 96.0 95.8375 94.0 94.0 94.0 95.0 95.1 95.0 95.8 96.0 95.8
Minimum efficiency values defined in IEC 60034-30:2008 standard (based on test methods specified inIEC 60034-2-1:2007)
ABB and efficiency standardsABB determines efficiency values according to IEC/EN 60034-2-1 using the low uncertainty method i.e. indirect method, with additional load losses determined by measurement.
ABB has a full range of IE2 motors – with many available from stock – and a broad range of IE3 motors.
As the world market leader, ABB offers the largest range of LV motors available. It has long advocated the need for efficiency in motors, and high efficiency products (EFF1 in the former European classification scheme) have formed the core of its portfolio for many years.
M
0004
16
ABB LV Motors M2QA Motors 05
Mechanical design
Totally enclosed, fan cooled IP55Heavy duty design, manufactured from extra corrosion resistant cast ironmaterials to be used in all kind of environment. The motor is mechanicallyvery strong and robust and as standard designed for additional energysaving through frequency converter drives.
Flexible cable entry direction
Powerful refit availableThe motors satisfy the requirements of a wide range of environmentsand applications, such as improving protection, insulation level,regreasing facilities, dust-proof, sealing rings, rainproof are available, afull range of options are listed in page 13.
Insulation and insulation classes
According to IEC60085, insulating materials are divided into insulationclasses. Each class has a designation corresponding to the temperaturethat is the upper limit of the range of application of the insulating materialunder normal operating condition.
The winding insulation of a motor is determined on the basis of thetemperature rise in the motor and the ambient temperature. The insulation
In most cases, the standard rated outputs of motors from ABB Motorsare based on the temperature rise for insulation classes B. Where thetemperature rise is according to class F, this is specified in the datatables.
However, all the motors are designed with class F insulation, which permitsa higher temperature rise than class B. The motors, therefore, have agenerous over-load margin. If temperature rise to class F is allowed,the outputs given in the tables can generally be increased by about 12 %
Temperature limits are according to standards. The extra thermal marginwhen using class F insulation with class B temperature rise makes themotors more reliable.
Mounting arrangements
Foot-mounted motor
Foot-mounted motor, shaft with free extensions
IM B8IM1071
*) Not stated in IEC 60034-7
Flange-mounted motor, large flange
Flange-mounted motor, small flange
Foot-and flange-mounted motor with feet, large flange
Foot-and flange-mounted motor with feet, small flange
IM B3IM1001
IM V5IM1011
IM V6IM1031
IM B6IM1051
IM B7IM1061
IM B5IM3001
IM V1IM3011
IM V3IM3031
*)IM3051
*)IM3061
*)IM3071
IM B14IM3601
IM V18IM3611
IM V19IM3631
*)IM3651
*)IM3661
*)IM3671
IM B35IM2001
IM V15IM2011
IM V36IM2031
*)IM2051
*)IM2061
*)IM2071
IM B34IM2101 IM2111 IM2131 IM2131 IM2161 IM2171
IM1002 IM1012 IM1032 IM1052 IM1062 IM1072
Product code pos.12
A= foot-mounted, term.box top B= flange mounted, large flangeL = foot-mounted, term.box LHS C= flange mounted, small flangeR= foot-mounted, term.box RHS T = foot/flange -mounted, term.box LHSH= foot/flange-mounted, term.box top S= foot/flange-mounted, term.box RHSJ = foot/flange-mounted, small flange
06 M2QA Motors ABB LV Motors
Terminal boxes are mounted on the top of the motors, right or left. Terminalboxes of motor size 71-132 can rotate 4x90°,and those of 160-355 canrotate 2x180°. All are easy to refit.
is normally dimensioned for the hottest point in the motor at its normalrated output and at ambient temperature of 40°C. Motors subjected toambient temperatures above 40°C will generally have to be derated.
Motors for other voltages
Motors wound for a given voltage at 50Hz can also be used for othervoltages. Recalculation factors for current and torque given are beside;efficiency, power factor and speed remain approximately the same.Guaranteed values available on request.
ABB Motors reserve the right to change the design, technical specification and dimensions without prior notice.
Bearings and terminal boxes
Terminal boxes for motor sizes 71-132
Bearing seals for motor sizes 71-132
Terminal boxes for motor sizes 160-250 Terminal boxes for motor sizes 280-355
Bearing seals for motor sizes 160-225
Motors wound for certain voltage at 50 Hz can be operated at 60 Hz,without modification, subject to the following changes in their data.
Bearing seals for motor sizes 250-355
The motors are normally fitted with single-row deep groove ball bearingsas listed in the table below. Degree of protection of the standard termi-nal box is IP55. The motors are supplied with 2 cable entries as stan-dard according to the table below.
Terminal boxes are mounted on top of the motor. The terminal box ofmoter sizes 71 to 132 can be turned 4 x 90° and in motors sizes 160 to355 rotated 2 x 180°.
Standard design
TC70 x 85 x 10
TC80 x 100 x 10
TC80 x 100 x 10 (2P)
TC95 x 120 x 12 (4-8P)
Radial seal D-end
Motor
size
250
280
315
TC95 x 120 x 12 (2P)
TC95 x 120 x 12 (4-8P)
355
TC110 x 140 x 12 (4-8P)
ABB LV Motors M2QA Motors 07
Permissible loadings on the shaft end
The tables below give the permissible radial force in Newton, assumingzero axial force. The values are based on normal conditions at 50 Hzand calculated bearing lives for motor sizes 71 to 355 of 20000 hoursand 40000 hours.
Motors are foot-mounted IM B3 version with force directed sideways. Insome cases the strength of the shaft affects the permissible forces.
At 60 Hz the values must be reduced by 10%. For two-speed motors,thevalues must be based on the higher speed.
Permissible loads of simultaneous radial and axial forces will be suppliedon request.
Permissible radial forcesMotor size 71 to 355
If the radial force is applied between points X o and Xmax,the permissible force F R can calculatedform the following formula: F R=Fxo-X/E (Fxo-Fxmax) E=length of shaft extension in basic version
Permissible axial forces
The Following tables give the permissible axial forces in Newton,assuming zero radial force. The values are based on normal conditionsat 50 Hz with standard bearings and calculated bearing life time of 20000and 40000 hours.
At 60 Hz the values are to be reduced by 10% For two-speed motors,the values are to be based on the higher speed. The permissible loadsof simultaneous radial and axial forces will be supplied on request.
Given axial forces F AD, assumes D-bearing locked by means of lockingring.
Mounting arrengement IM B3
08 M2QA Motors ABB LV Motors
Sample orderWhen placing an order, the motor type, size and product code must bespecified. The product code of the motor is composed in various way, inaccordance with the following examples.
A Motor typeB Motor size
C Product codeD Mounting arrangement code
E Voldtage and frequency codeF Generation code
G Variant codes
Positions 1 to 4M2QA = Totally enclosed fan cooled squirel cage motor with cast ironframe
Positions 5 and 6IEC frame07 = 71 13 = 132 25 = 25008 = 80 16 = 160 28 = 28009 = 90 18 = 180 31 = 31510 = 100 20 = 200 35 = 35511 = 112 22 = 225
Position 7Speed (pole pairs)1 = 2 poles 6 = 12 poles2 = 4 poles 7 = >12 poles3 = 6 poles 8 = Two-speed motors for fan drive motors for constant torque4 = 8 poles 9 = Multi-speed motors, two-speed5 = 10 poles
Position 8 to 10Serial number
Position 11- (dash)
Positions 12Mounting arrangementA = Foot-mounted, top-mounted terminal boxR = Foot-mounted, terminal box on RHS, seen from D-endL = Foot-mounted, terminal box on LHS, seen from D-endB = Flange-mounted, large flangeC = Flange-mounted, small flange size (71-112)H = Foot-and flange-mounted, terminal box top-mountedJ = Foot-and flange-mounted, small flange with tapped holesS = Foot-and flange-mounted, terminal box RHS seen from D-endT = Foot-and flange-mounted, terminal box LHS seen from D-endV = Flange-mounted. special flangeF = Foot-and flange--mounted. Special flange
Positions 13Voltage and frequencySingle-speed motorsB 380 V 50HzD 400 V / 690VY 50Hz, 460V 60HzE 500 V 50HzF 500 VY 50HzS 230 V / 400VY 50Hz, 460VY 60HzT 660 V 50HzU 690 V 50HzX Other rated voltage, connection or frequency, 690 V maximumRemarkFor voltage code X the variant code 209 non-stamdard voltage or frequency(special winding) must be ordered.
Positions 14Generation codeA, B, C, ...
Positions 15+ (plus)
Positions 16Variant codesThe product code must be, if need, followed by variant codes: Please see page 15-16.
Rating plate
The rating plates are in table form giving values for speed, current and power factor for three voltages.The following information must be shown on the motor rating plate according to IEC 60034-30; 2008 and European MEPS (Commission Regulation, EC, No 640/2009):
− Lowest nominal efficiency at 100 %, 75 % and 50 % rated load − Efficiency level IE1
3 motor M2QA9OL4A IEC 60034-1
3GQA092501-CSA62052RSH/C3
230Y/400Y 50 1400 1.5 0.79 6.17/3.54
460Y 60 1700 1.73 0.700 3.41
62052RSH/C3
Explanation of the product code (C,D,E,F) :
Ordering information
3 motor M2QA160M4A B3IEC 160M42S1 No. 36C12500524493006006
400 50 11 1460 21.2 0.85690 50 11 1460 12.3 0.85460 60 12.7 1755 20.5 0.87IE1 - 88.2(100%)-89.1(75%)-88.7(50%)
Prod.code 3GQA162301-ADA
Date 2012.1
6309/C3 6209/C3 116 kg
IEC 60034-1
IE1-78.3(100%)-80.6(75%) 90.2(50%) 21 KG
ABB LV Motors M2QA Motors 09
Totally enclosed squirrel cagethree phase motors, cast iron frame IP55 IC411
Insulation class FTemperature rise class BIE1-2 Poles, IE1-4 Poles
***
**
28702785284028552850285028602875290529102920292029202940295529552970296029702970298029802975297529802980
139513951410141513951400143014251435143514401460145514701470147514801480147514801480148514851485148514901490
69.069.072.074.576.879.082.283.785.186.587.689.590.091.091.592.292.692.893.494.094.394.594.894.995.095.395.5
71.1970.7272.5275.7477.2280.8182.5184.6085.6687.2088.0789.8190.6191.0691.6592.1392.4792.6593.2993.9694.1994.1894.5594.5994.7794.9995.28
0.700.720.730.760.760.780.790.810.480.820.830.850.860.860.880.870.860.870.880.870.870.870.880.880.880.900.90
0.751.071.511.922.703.514.896.398.7511.214.920.928.034.139.754.067.180.497.1132158193230278347423529
4.54.55.26.06.06.06.06.56.56.56.56.56.56.56.56.57.07.07.06.57.26.96.96.96.96.97.0
1.712.533.735.067.5310.214.720.126.636.649.772.098.51201431942392903564845817078491029108616022019
2.12.12.42.42.32.32.32.32.32.32.32.42.32.32.42.22.22.22.42.42.32.12.12.12.12.12.1
2.42.42.02.22.22.22.22.22.22.22.22.82.43.03.12.82.82.83.02.62.82.22.22.22.22.62.3
72.075.575.577.579.081.583.085.087.588.590.090.090.590.891.492.292.693.494.094.394.094.594.694.895.496.0
73.4777.6875.8278.8279.9882.0783.5885.8087.6688.8889.6989.9690.5590.6090.6291.5992.0692.9393.4993.9393.0793.7693.8794.3694.7095.43
0.820.830.850.860.870.860.870.900.890.900.880.880.900.900.900.900.890.890.900.910.900.900.910.920.90.9
0.901.271.692.383.154.536.07.5510.213.720.227.233.038.952.664.078.895.5127151187223268331420526
6.05.56.17.07.07.07.07.07.07.06.56.56.56.56.56.57.07.57.57.57.17.17.27.27.16.9
1.271.892.523.685.037.3710.013.318.124.636.049.160.571.597.01201451772412893534235146428011009
2.22.22.22.22.22.22.22.22.22.22.52.52.52.32.22.32.52.42.52.31.81.81.81.82.32.0
2.42.42.22.22.22.22.22.22.22.23.03.23.22.82.72.72.83.03.33.22.22.22.22.22.82.8
*Insulation Class F Tmperature rise Class F
10 M2QA Motors ABB LV Motors
Totally enclosed squirrel cagethree phase motors, cast iron frame IP55 IC411
Insulation class FTemperature rise class BIE1-6 Poles
***
***
885885930925920920940940945950950960970975980980985980980980990990990985990990990
55.058.063.565.771.073.077.279.681.684.085.088.088.589.590.390.491.592.292.693.093.593.894.394.594.795.095.4
54.0059.5763.9366.8872.1074.8377.8780.5482.6984.6085.9488.3088.8789.6990.3790.6391.3592.5392.4292.8293.2493.6094.1694.4294.2694.6695.05
0.670.670.660.680.720.740.740.730.770.770.780.780.780.820.820.830.828.880.860.860.860.860.870.880.880.880.88
0.710.931.271.792.122.943.795.466.898.9312.015.823.029.536.142.358.165.881.698.7135161194230277345430
3.54.05.05.05.05.05.55.56.56.56.56.06.06.06.06.06.66.86.57.07.47.46.86.86.86.76.7
1.942.703.805.687.7911.415.222.430.340.255.374.610814718021429136143953672386810611280154319292412
2.12.01.91.92.02.02.02.02.02.02.02.02.22.32.22.12.22.32.32.32.02.02.02.02.12.02.0
2.32.01.81.82.22.22.22.22.22.22.22.32.32.82.82.82.82.82.42.52.02.02.02.02.42.32.3
700700700700690675695710710720720720730730735735735740740740740740740740740740
51.054.562.563.570.071.575.081.081.084.085.586.587.789.090.090.591.391.892.492.893.093.894.094.394.594.7
50.1253.2862.0763.3470.0870.2875.3981.7881.3883.9895.6285.8286.9689.3889.1289.6090.1091.791.191.5291.9393.2292.3893.8994.1394.53
0.600.600.600.620.640.640.680.700.750.730.740.740.770.780.730.740.790.790.790.820.820.820.820.820.820.82
0.851.101.412.032.423.444.585.607.139.4212.516.923.531.440.647.460.073.689.0104142169206248298372
3.33.64.44.75.05.05.05.55.55.55.55.55.45.55.56.06.56.06.06.97.07.16.46.26.26.2
2.463.415.057.5010.415.620.629.640.453.173.099.514419624028639047858171096811611420170420652581
1.81.81.81.81.81.81.81.81.82.12.12.12.02.32.12.22.32.12.11.81.81.81.81.81.81.8
1.91.91.92.02.02.02.02.02.02.52.52.52.82.82.82.82.62.62.72.02.02.02.02.02.02.0
*Insulation Class F Tmperature rise Class F
ABB LV Motors M2QA Motors 11
Cast iron motorType M2QA71-355
Dimension drawingFoot-mounted motor designation IM B3, IM B6, IM B7, IM B8, IM V5, IM V6Flange-mounted, mounting designation IM B5, IM V1, IM V3Foot-and flange-mounted, mounting designation IM B35, IM V15, IM V36
three phase motor, foot mounted, terminal box top-mounted
three phase motor, foot mounted, terminal box on right hand side (on request)
Size 71-132 Size 160-355
Size 71-132 Size 160-355
12 M2QA Motors ABB LV Motors
Cast iron motorType M2QA71-355
Dimension drawingFoot-mounted motor designation IM B3, IM B6, IM B7, IM B8, IM V5, IM V6Flange-mounted, mounting designation IM B5, IM V1, IM V3Foot-and flange-mounted, mounting designation IM B35, IM V15, IM V36
three phase motor, foot-and flange-mounted, terminal box mounted on right hand side (on request)
three phase motor, foot-and flange-mounted, terminal box top-mounted
three phase motor, flange-mounted
Size 71-200 Size 315-355Size 225-280
Size 160-355Size 71-132
Size 160-355Size 71-132
ABB LV Motors M2QA Motors 13
Cast iron motorType M2QA71-355
Dimension drawingFlange-mounted; IM B14, IM V18, IM V19Foot-and flange-mounted; IM B34
flange-mounted motor, small flange IM B14 (on request)
)tseuqer no( 43B MI detnuom-edis xob lanimret)tseuqer no( 43B MI detnuom-pot xob lanimret
14 M2QA Motors ABB LV Motors
Co
rro
sio
n p
rote
ctio
nE
ffec
tive
co
rro
ssio
n p
rote
ctio
nm
eans
tha
t th
e m
otor
can
be
used
in a
ll en
viro
nmen
ts.
M20
00 C
ast
iro
n m
oto
rs -
to
tally
enc
lose
d s
qui
rrel
cag
e th
ree
pha
se m
oto
rs
Lub
rica
tio
nM
otor
siz
es 7
1-22
5 ar
e fit
ted
with
bea
rings
that
are
regr
ease
dfo
r lif
e. F
or s
ize
250-
355
are
equi
pped
with
bea
ring
that
are
regr
easa
ble
via
grea
se n
ippl
es.
Ter
min
al b
ox
The
spac
ious
ter
min
al b
ox o
f ca
st ir
on m
akes
the
mot
or q
uick
and
eas
y to
con
nect
. The
term
inal
box
of m
otor
siz
es 7
1-13
2 ca
n be
turn
ed 4
x90
degr
ees
and
for
size
s 16
0-35
5 it
is p
ossi
ble
to tu
rn th
e te
r-m
inal
box
2x1
80 d
egre
es.
As
stan
dard
the
ter
mi-
nal b
ox is
on
top
of th
e m
otor
but
it is
als
o po
ssib
lein
som
e si
zes
to
get
it on
eith
er r
ight
or
left
hand
side
at c
usto
mer
s r
eque
st.
Insu
lati
on
Ph
ase
insu
lati
on
an
d g
ener
ou
sel
ectr
ical
dim
ensi
onin
g gi
ve th
e m
otor
a hi
gh o
verlo
ad c
apac
ity. (
Sui
tabl
e fo
rfre
quen
cy c
onve
rter
driv
e)
End
shie
lds,
flanges
The
end
shie
ld a
nd d
iffer
ent
varia
nts
of flanges
are
of c
ast
iron.
Bea
ring
sTh
e m
otor
siz
es 7
1-13
2 ar
e fitted
with
encl
osed
DD
U C
3 be
arin
gs a
s st
anda
rd.
The
fram
e si
zes
160-
225
are fitted
with
encl
osed
2Z
bear
ing
as s
tand
ard.
Siz
es25
0-35
5 ha
ve r
egre
asab
le b
earin
gs a
sst
anda
rd.
Mod
ern
desi
gn s
ecur
e hi
ghlo
ad c
apac
ity r
un.
Sta
tor
The
stat
or is
mad
e of
cas
t iro
n, in
clud
ing
feet
, w
hich
mak
e th
e m
otor
mec
hani
cally
ver
y st
rong
and
robu
st. I
nteg
rally
cas
t iro
n fe
et a
llow
a v
ery
rigid
mou
ntin
g an
d m
inim
al v
ibra
tion.
Ro
tor
win
din
gTh
e ro
tor
win
din
g is
mad
e of
pre
ssur
edi
ecas
t alu
min
ium
, a d
esig
n th
at p
rovi
des
high
sta
rtin
g ca
paci
ty a
nd lo
w n
oise
leve
l.
Low
no
ise
leve
lTh
e hi
gh efficiency
of
the
mot
orm
eans
tha
t a
smal
ler,
qui
eter
fan
can
be u
sed.
ABB LV Motors M2QA Motors 17
ABB Motors’ total product offer
ABB offers several comprehensive
ranges of AC motors and generators.
We manufacture synchronous motors
for even the most demanding appli -
cations, and a full range of low and
high voltage induction motors. Our
in-depth knowledge of virtually every
type of industrial processing ensures
we always specify the best solution
for your needs.
Low voltage motors and generators
Process performance motors for
more demanding applications
− Cast iron motors
− Premium efficiency motors
− NEMA motors
Industrial performance motors
– flexibility for most customer
applications
− Aluminum motors
− Steel motors
− Cast iron motors
General performance motors
– out-of-the-box simplicity for
high volume customers
− Aluminum motors
− Cast iron motors
Motors for hazardous areas
− Flameproof motors
− Increased safety motors
− Non-sparking motors
− Dust ignition proof motors
Marine motors
− Aluminum motors
− Steel motors
− Cast iron motors
− Open drip proof motors
Motors for additional applications
− Open drip proof motors
− Brake motors
− Single phase motors
− High ambient motors
− Permanent magnet motors
− High speed motors
− Wind turbine generators
− Smoke venting motors
− Water cooled motors
− Motors for roller table drives
− Servomotors
High voltage and synchronous
motors and generators
− High voltage cast iron motors
− Induction modular motors
− Slip ring motors
− Motors for hazardous areas
− Synchronous motors and generators
− DC motors and generators
− Wind turbine generators
− Traction motors
18 M2QA Motors ABB LV Motors
Visit our web sitewww.abb.com/motors&generators
ABB LV Motors M2QA Motors 19