Abhyankar Consultancies CAE and Design Consultants
Slide 2
Established in 2013 and managed by technocrats having
experience in CAE of more than 05 years. We provide CAE results
along with design consultation. We have expertise in non-linear and
dynamic analysis. Customer satisfaction first is only our vision
and mission. 2 About F.E solutions
Slide 3
Finite Element Analysis (FEA) is a computer based method of
simulating/analyzing the behavior of engineering structures and
components under different working conditions. It is an advanced
engineering tool that is used in design and to augment/replace
experimental testing. 3 What is FEA?
Slide 4
Allows virtual simulation to anticipate response of structure
(stress developed and deformations) to applied loads at design
stage. This allows fixing problems at design stage. Increases the
product reliability and robustness. Reduces product development
time and cost. Reduces the number of prototype testing Accepted
validation procedure by different design codes/agencies. 4 Why FEA
and how it will help you?
Slide 5
Structure analysis: a cantilever, a bridge, an oil platform
Solid mechanics: a gear, a automotive power train Dynamics:
vibration of Sears Tower, earthquake and seismic waves, bullet
impact, vehicle chassis Thermal analysis: heat radiation of finned
surface, temperature distribution in PCB, Biomaterials: dental
implants, human organs and tissues 5 Where FEA can be applied?
Slide 6
The availability of FEA enables engineers to achieve objectives
which they otherwise could not, for instance making design
modifications of highly stressed areas. In almost any type of
engineering endeavor, FEA saves time and money. FEA aids
understanding of the structural behaviour which helps to remove
uncertainty and unnecessary pessimism. 6 Benefits of FEA
Slide 7
Finite Element Analysis (F.E.A.) Services Finite Element
Analysis (F.E.A.) Services. Static Structural Analysis Thermal
Analysis Couple Field Analysis Dynamic Analysis and modal analysis
7
Slide 8
F. E. Analysis of Crankshaft to find the Torsional Stiffness
CAD ModelFE Model Torque = 1 N-m Journal Axis Tangential
Deformation Units N and mm
Slide 9
9 Objective :To find out stresses and deflections in base frame
of a diesel generator set under shock load. F. E. Analysis of base
frame Response was found for different excitation values.
Slide 10
10 Objective : To find deflection and linearized stresses under
different loading condition. F. E. Analysis of pressure vessel
Region for linearized stress
Slide 11
Thermal Analysis of pressure vessel CAD Model FE Model
Objective :To find temperature distribution over the vessel due to
different heat generators. Temperature distribution
Slide 12
Harmonic Analysis of base frame Objective :To find the
frequency response of the structure under the excitation load.
dist
Slide 13
F.E.A. Services F.E.A. Services. Credentials Run by team of ME
Mechanical Engineers specialized in CAE having an experience of 5+
years each. Engaged in Academic Activities providing FEA Learning
Solutions to Students of BE Mechanical Course and for industry
professionals. 13
Slide 14
14 Contact us . Address :Flat no. 14, B-1, Bandal Complex, Near
Kotharud bus Depot. Paud road, Pune -411038 Contact no. :
08237573406, Email ID:[email protected],[email protected]
Website :