Ivor Allsop and his family have sought to make everyday tasks easier. Like all of our products, Softride Access Racks developed out of necessity.
Ivor’s brainchild arose with the realization that his five-foot wife, Betty, would never be able to lift her bike atop the family Suburban. Like he had been doing for nearly 25-years, Ivor sought to make this burdensome process easier by creating a hitch mounted bike rack.
In one afternoon Ivor and his two sons, Jim and Mike, sat down and brainstormed what was the first hitch-mounted bike rack. The men quickly went to work patenting their ingenious parallelogram design that allows individuals to lower their rack parallel to the ground. The parallelogram functionality is unsurpassed because it does not “dump” bikes onto the ground when the user lowers the rack. This allows the user to easily access the rear of their vehicle without having to remove their bikes from the rack.
About Access RacksSoftride has long recognized the annoying “clank” that
originates from the receiver when towing. To remedy this aggravating occurrence Softride created a tightening hitch pin that retrofits inside a two-inch hollow ball mount. This clever device forces the receiver to the side effectively eliminating the side-to-side motion that occurs during towing. The QuietRide™ system caught the attention of a leading auto manufacturer who was seeking a “clank” solution and a partnership was created.
The success of the Tightening Hitch Pin, realized in part by the OEM agreement, caused the wheels to turn at Softride, and the QuietRide™ Tightening Ball Mount was born.
Jim Allsop’s brain child turned out to be so much more than just two dimensional tightening; it is the only product in the market that truly eliminates all sway in the receiver. The magic of this patented product occurs when the ball mount is drawn to the side of the receiver. As the ball mount is tightened the “gold wedge” is actuated forcing the ball mount down and effectively creating a secure contact on three sides of the receiver (side, top, and bottom). This ensures that all gaps around the ball mount are absorbed leaving the vehicle and equipment damage free and without the annoying “clank”.
About QuietRide
Softride Racks Other Brands QuietRide™ Tight & Quiet Other Brands Loose & Noisy
innovative bike racks towing products
Spring-loaded quick release pull pin handle
Powder-coated steel for strength & corrosion resistance
QuietRide™ tightening anti-rattle hitch bolt secures the rack to the auto
Soft, rubberized cradles gently support bikes
Rugged tie-down straps safely secure bikes
Adjustable width arms accommodate children and adult bikes
Rack arms fold down or remove to stow out of the way
Safety reflectors provide nighttime visibility
Includes QuietRide™ tightening anti-rattle hitch bolt
Anti sway, cable lock and hitch lock sold separately
Key Features
CARRIES
BIKES
Original Parallelogram Design Allows ForEasy Rear Vehicle Access
Easily Adjustable Rack Arms
Universal Hitch
Heavy Duty Straps
Parallelogram Design
Carries up to four 30 lb bikes
Weighs 30 lbs
Part # 26248 Universal Hitch(fits 2” & 1 ¼” receivers)
Rack specifications
Holds two 50 lb bikes Powder-coated steel Anodized aluminum Includes cable lock Tightening hitch bolt and lock Tilts up and down
VERSA BIKE RACK
ITEM # 26249 (Universal Hitch fits 2” and 1 ¼”)
Protects pick up truck tailgates 4 heavy duty tie downs Extra padding where it counts Carries 6+ bikes 61" wide for full-sized trucks 54" wide for mid-sized trucks
SHUTTLE PAD
6 straps secure rack in all 3 planes Holds two 30 lb bikes 4 foam pads contact vehicle Ultra-Strong steel construction
TRUNKSTER
ITEM # 26372
Carries up to 4 snowboards or 5 pairs of skis
Converts bike rack to a ski rack Holds cargo at 45-degree angle Includes lock
SKI RACK ATTACHMENT
ITEM # 24232(Fits Dura, Hydraulic Assist Dura, and Elite Racks)
ITEM # 23970(Fits HD, DX, and Pull Pin Racks)
ITEM # 26461(Small 54”)
ITEM # 26457(Large 61”)
Three-axis tightening Fits 2” receivers Accepts 1” ball shanks 1,000 lb tongue weight 10,000 lb GTW
STEEL TIGHTENINGBALL MOUNT
ITEM # 25733 (2” Drop)ITEM # 25734 (4” Drop)ITEM # 25735 (6” Drop)
Three-axis tightening Fits 2” receivers Accepts 1” and 1¼” ball shanks 1,000 lb tongue weight 10,000 lb GTW
ALUMINUM TIGHTENINGBALL MOUNT
ITEM # 26039 (2” Drop)ITEM # 26040 (4” Drop)ITEM # 26041 (6” Drop)
Two-axis tightening Brass lock with dust cover / keys Stainless steel bolt Fits 2” hollow receivers
TIGHTENING HITCH PIN
ITEM # 25219 (with lock)
ITEM # 25743 (Ball Mount POP Display)
ITEM # 25540 (Bike Rack POP Stand)
POP DISPLAYS Displays Softride product Easy to assemble
ELEMENT BIKE RACK
ITEM # 26248(Universal Hitch fits 2” and 1 ¼”)
Holds four 30 lb bikes Powder-coated steel Tightening hitch bolt Removable / Adjustable arms
Holds four 40 lb bikes Powder-coated steel Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable arms
DURA BIKE RACK
ITEM # 26247 (Universal Hitch fits 2” and 1 ¼”)
HYDRAULIC ASSISTDURA BIKE RACK Holds four 40 lb bikes Powder-coated steel Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable arms
ITEM # 26321 (Universal Hitch fits 2” and 1 ¼”)
Holds three 30 lb bikes Anodized aluminum Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable / Adjustable arms
ALUMINA3
BIKE RACK
ITEM # 26428(Universal Hitch fits 2” and 1 ¼”) NEW
NEW
NEW
Original parallelogram design for easy rear vehicle access
Powder-coated steel for strength & corrosion resistance
QuietRide™ locking & tightening anti-rattle hitch bolt secures the rack to the auto
Spring-loaded quick release pull pin handle
Reinforced steel top plate for added strength
Soft, rubberized cradles and rugged tie-down straps safely secure the bike
Includes cable lock, hitch lock and anti-sway
Accommodates children and adult bikes
Removable rack arms stow out of the way
Safety reflectors provide nighttime visibility
Includes QuietRide™ tightening anti-rattle hitch bolt and lock with dust cover
Ski rack attachment available
Key Features
Rugged Construction & The Ultimate Function
Anti Sway Cradle
Rack Arms Easily Removable
Universal Hitch
Carries up to four 40 lb bikes
Weighs 43 lbs
Part # 26247 Universal Hitch(fits 2” & 1 ¼” receivers)
Rack specifications
EASY ACCESS
CARRIES
BIKES
Hydraulic assisted for easy lifting and provides dampening when lowering
Original parallelogram design for easy rear vehicle access
QuietRide™ locking & tightening anti-rattle hitch bolt secures the rack to the auto
Hydraulic assisted for effortless lifting
Gas spring provides dampening when lowering
Unique disengagement lever for everyday use without bikes
Spring-loaded quick release pull pin handle
Reinforced steel top plate for added strength
Soft, rubberized cradles and rugged tie-down straps safely secure the bike
Includes cable lock, hitch lock and anti-sway
Accommodates children and adult bikes
Removable rack arms stow out of the way
Safety reflectors provide nighttime visibility
Includes QuietRide™ tightening anti-rattle hitch bolt and lock with dust cover
Ski rack attachment available
Key Features
Hydraulic Assisted for Effortless Lifting
Rack Arms Easily Removable
Hydraulic Assist Gas Spring
Carries up to four 40 lb bikes
Weighs 43.5 lbs
Part # 26321 Universal Hitch (fits 2” & 1 ¼” receivers)
Patent Pending
Rack specifications
EASY ACCESS
CARRIES
BIKES
Universal Hitch
Heavy Duty Straps Heavy Duty Straps
EASY ACCESS
Al13aluminum
10 lb base rack install weight
Anodized aluminum rack body with powder coated steel rack arms
Full featured rack at a fraction of the weight
Lightweight and strong materials (Anodized Aluminum and Powder Coated Steel)
Easily lowers while bikes stay loaded
Soft rubberized cradles and rugged tie downs
Cable lock, anti-rattle hitch lock and anti-sway cradles
Removable rack arms reduce installation weight of rack to 10 lbs.
Arms fold down when not in use
Safety reflectors increases nighttime visibility
Universal hitch (includes parts for 2” and 1.25” receivers)
Adjustable width arms accommodate large range of bikes (7” to 9” span)
Key Features
Lightest Rack That Allows Rear Vehicle Access with Bikes Loaded
Carries up to three 30 lb bikes
Weighs 20 lbs
Install Weight 10 lb (plus detachable rack arms)
Part # 26428 Universal Hitch (fits 2” & 1 ¼” receivers)
Rack specifications
Easily Adjustable Rack Arms
Heavy Duty Straps
Fold Down Arms
22CARRIES
BIKES33CARRIES
BIKES
Folds Up When Not In UseCompact When Not In Use
Designed for easy rear vehicle access
Folds up when not in use
QuietRide™ locking & tightening anti-rattle hitch bolt secures the rack to the auto
Most Compact & LightweightReceiver-Mounted 2-Bike Rack Available
Holds up to two 50 lb bikes (on standard Class III 2” receivers)
Weighs 43 lbs
Part # 26249 Universal Hitch (fits 2” & 1 ¼” receivers)
Patent Pending
Rack specifications
EASY ACCESS
Anodized aluminum and powder-coated steel for strength and corrosion resistance
Spring-loaded quick release pull pin lever arm
Includes secure wheel mount cradles with rubber straps
Telescoping tubes adjust side-to-side to accommodate children and adult bikes
Safety reflector for nighttime visibility
Includes cable lock
Includes QuietRide™ tightening anti-rattle hitch bolt and lock with dust cover
Key Features
Universal Hitch
Heavy duty vinyl cover for passenger truck tail gates
Extra padding where it counts
Snug fittings with 4 tie-down straps and a daisy chain for securing bikes to the rail
Easily converts the tail gate of most full sized trucks into a working 6 bike rack
Designed for Mountain Bikes (works with most all bikes)
Access™ flap to reach gate handle while pad is attached
Includes 6 soft wraps for tethering bikes to daisy chain
Least expensive way to carry 6 bikes
Key Features
Tailgate Pad Protects Bikes and TrucksFor Quick Transport
Carries up to 6 bikes
Weighs 4 lbs
2 Sizes: L (61”) S (54”)
Part #26457 (L size: fits most full-size trucks)
Part #26461 (S size: fits most mid-size trucks)
Rack specifications
FAST LOAD / UNLOAD
Carries up to two 30 lb bikes
Weighs 13 lbs
Tool-less install
Designed for vehicles without spoilers
Part #26372
Rack specifications
Snug fit to vehicle with 6 straps
Fits wide range of vehicles
No tools required for assembly and install
Tool-less assembly and installation
Holds 2 bikes securely
Fits minivans, coupes, sedans, wagons, crossovers, and SUVs
4 foam pads create soft points of contact
Fast fit dial for easy installation
Key Features
Elegant and Straight Forward Trunk Mounted 2 Bike Rack
66CARRIES
BIKES22CARRIES
BIKES
45º Angle Minimizes Height
Easy rear vehicle access
45º angle minimizes height for garage access
Securely holds all skis and snowboards
Converts bike rack to a ski rack
Holds skis and snowboards
Holds cargo at 45-degree angle
Fits in most Softride Bike Racks
Versatile & Convenient – no more reaching to the top of vehicle to retrieve equipment
Carrier can be easily lowered with a spring pull pin to allow access to rear of vehicle with fully loaded rack
Sturdy Construction
Includes lock
Key Features
Versatile & Easily ConvertsBike Rack into a Ski/Snowboard Rack
Carries up to 4 snowboards, 5 skis, or a combination of both
Part # 24232 (Fits Dura, Hydraulic Assist Dura, and Elite Racks)
Part # 23970 (Fits HD, DX, and Pull Pin Racks)
Rack specifications
EASY ACCESS
55CARRIES
SKIS44CARRIES
SNOWBOARDS
Patented 3-axis tightening & locking technology
Forged & heat treated solid aluminum construction
Reduces wear & tear on the vehicle's drive train
Use with any 2" vehicle receiver
Wedge and tightening hitch pin combine for safe, quiet towing
Stainless steel hitch pin with lock and dust cover
1-¼” shank hole with sleeve for 1” ball shanks
Class IV
1,000 lb tongue weight
10,000 lb gross towing weight
Patent # 7,004,491
Key FeaturesWorld’s First Solid AluminumTightening Ball Mount
2” Drop & ¾” Rise
Part # 26039
2” Drop Ball Mount
4” Drop & 2-¾” Rise
Part # 26040
4” Drop Ball Mount
6” Drop & 4-¾” Rise
Part # 26041
6” Drop Ball Mount
Patented Wedge TechnologySpacer for 1” Ball Shanks
Patented 3-axis tightening & locking technologies
Rugged powder-coated steel construction
Reduces wear & tear on the vehicle's drive train
Use with any 2" vehicle receiver
Wedge and tightening hitch pin combine for safe, quiet towing
Stainless steel hitch pin with lock and dust cover
1” shank hole for 1” ball shanks
Class IV
1,000 lb tongue weight
10,000 lb gross towing weight
Patent # 7,004,491
Key FeaturesWorld’s FirstTightening Ball Mount
2” Drop & ¾” Rise
Part # 25733
2” Drop Ball Mount
4” Drop & 2-¾” Rise
Part # 25734
4” Drop Ball Mount
6” Drop & 4-¾” Rise
Part # 25735
6” Drop Ball Mount
Patented Wedge TechnologyRugged Powder-Coated Steel
13aluminum
Al
Two axis tightening & locking hitch pin
Reduces wear & tear on the vehicle's drive train
Adapts for use on otherreceiver-mounted products
Patented Tightening Hitch PinStops the Clank
2-AXIS TIGHTENING
SAFELY ELIMINATES
THE “CLANK” Stainless steel hitch pin
Brass lock with rubber dust cover
Use with any 2" hollow ball mount
Eliminates the clanking sound while towing
Key Features
Weighs 1 lb
Part # 25219 (Tightening Hitch Pin with Lock)
Patent # 7,338,065
Tightening Hitch Pin Specifications
Six-pack display
Available individually
NOITPIRCSED # METI YROSSECCA
Dura Rack Arm Set smrA 2 fo teS 07852 #METI
Element Rack Arm Set smrA 2 fo teS 73162 #METI
Cable Lock )aruD( 25442 #METI
)3animulA ,asreV ,tnemelE( 82952 #METI
Anti-sway And Strap Kit 53162 #METI
Hitch Lock And Bolt Set )ylnO srevieceR kcaR ekiB "4/1-1 stiF( 75052 #METI
)ylnO srevieceR kcaR ekiB "2 stiF( 65052 #METI
Replacement Rubber Straps )kcaP-4( 96852 #METI
Locking Bolt For Bike Racks )ylnO srevieceR kcaR ekiB "4/1-1 stiF( 69691 #METI
)ylnO srevieceR kcaR ekiB "2 stiF( 76922 #METI
Replacement Keys
Replacement Nut Holder And Nut For Tightening Hitch Pin ITEM# 25880
Replacement Bike Block Without Strap 20062 #METI
Ball Mount Pop Stand 34752 #METI
Bike Rack Pop Stand 04552 #METI
Universal Lower Kit 64462 #METI (Use to convert size specific Dura,,aruD tsissA .dyH ,3animulA ,tnemelE)"4/1-1 dna "2 lasrevinU ot asreV dna
ITEM # 26033ITEM # 25748
ITEM # 22751
Bolts to any secure vertical wall surface Uses existing rack arms
to neatly store bikes Robotically welded Powder-coated steel
GARAGE STORAGE STATION
Extends the bike rack 4-8”past rear-mounted spare tires
For 2” Dura, Elite, Element,Alumina3, Hyd. Assist Dura, and Versa Bike Racks
Rugged powder-coated steel
EXTENDED HITCH BARGOOSENECK ADAPTER Adds 4” of height for low riding vehicles For use with any 2" vehicle receiver Rugged powder-coated steel
Bridges the gap from stem to seat tube Allows upright rack use with:
kids bikes, lady bikes, and stepthrough frames
For use with any bike rack Min Distance 15" Max Distance 21"
ITEM # 26442ITEM # 26373
BIKE BUMPERTOP TUBE ADAPTER
ITEM # 26260(4 PACK)
ITEM # 26458(50 PACK FISHBOWL)
SOFT VELCRO WRAPS
Accessories
Protects bikes from contact damage against bike rack uprights
Durable and compression resistant For use on all upright Softride Racks Compatible with most brands
of upright racks Includes 2 Soft Velcro Wraps 20” Tall, 3.5” Wide
Velcro straps for securing bikes or cargo Countless uses include:
Ski Tie, Pant Leg Tether, Cable Holder, Cage Holder
Useful with every Softride rack
NEW NEW
NEW
Protects pick up truck tailgates 4 heavy duty tie downs Extra padding where it counts Carries 6+ bikes 61" wide for full-sized trucks 54" wide for mid-sized trucks
SHUTTLE PAD
6 straps secure rack in all 3 planes Holds two 30 lb bikes 4 foam pads contact vehicle Ultra-Strong steel construction
TRUNKSTER
ITEM # 26372
Carries up to 4 snowboards or 5 pairs of skis
Converts bike rack to a ski rack Holds cargo at 45-degree angle Includes lock
SKI RACK ATTACHMENT
ITEM # 24232(Fits Dura, Hydraulic Assist Dura, and Elite Racks)
ITEM # 23970(Fits HD, DX, Hang5, and Pull Pin Racks)
ITEM # 26461(Small 54”)
ITEM # 26457(Large 61”)
HANG2
ITEM # 27041
Carries 5 flat bar bikes (3 road bike) Holds bikes by the handle bar Parallelogram Lowering action Rugged steel construction No frame or fork contact Ships in two boxes 2" hitches only
Holds bikes by the handle bar Parallelogram Lowering action Rugged steel construction No frame or fork contact Carries 2 bikes MTB or Road or both
HANG5
Two-axis tightening Brass lock with dust cover / keys Stainless steel bolt Fits 2” hollow receivers
TIGHTENING HITCH PIN
ITEM # 25219 (with lock)
ELEMENT BIKE RACK
ITEM # 26248(Universal Hitch fits 2” and 1 ¼”)
Holds four 30 lb bikes Powder-coated steel Tightening hitch bolt Removable / Adjustable arms
Holds four 40 lb bikes Powder-coated steel Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable arms
DURA BIKE RACK
ITEM # 26247 (Universal Hitch fits 2” and 1 ¼”)
HYDRAULIC ASSISTDURA BIKE RACK Holds four 40 lb bikes Powder-coated steel Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable arms
ITEM # 26321 (Universal Hitch fits 2” and 1 ¼”)
Holds three 30 lb bikes Powder-coated aluminum Anti-sway cradles Integrated cable lock Tightening hitch bolt and lock Removable / Adjustable arms
ALUMINA3 BIKE RACK
ITEM # 26428(Universal Hitch fits 2” and 1 ¼”)
Softride Rack Products
ITEM # 26496
ACCESSORY ITEM # DESCRIPTION
Dura Rack Arm ITEM# 26557 1 Rack Arm
Element Rack Arm Driver Side ITEM# 26558 1 Driver Side Rack Arm
Element Rack Arm Passenger Side ITEM# 26559 1 Passenger Side Rack Arm
Cable Lock ITEM# 24452 (Dura)
Anti-sway And Strap Kit ITEM# 26135
Hitch Lock And Bolt Set Combo ITEM# 25056 (Fits 1-1/4" and 2” Bike Rack Receivers Only)
Replacement Rubber Straps ITEM# 25869 (4-Pack)
Replacement Hang5 Super Straps ITEM# 26543 (2-Pack)
Locking Bolt For Bike Racks ITEM# 19696 (Fits 1-1/4" Bike Rack Receivers Only)
ITEM# 22967 (Fits 2" Bike Rack Receivers Only)
Replacement Keys
Replacement Nut Holder And Nut For Tightening Hitch Pin ITEM# 25880
Replacement Bike Block Without Strap ITEM# 26549
Bike Rack Pop Stand ITEM# 25540
Common Universal Hitch Kit ITEM# 26446 (Use to convert size specific Dura,Element, Alumina3, Hyd. Assist Dura,and Versa to Universal 2" and 1-1/4")
ITEM # 26033ITEM # 25748
ITEM # 22751
Bolts to any secure vertical wall surface Uses existing rack arms
to neatly store bikes Robotically welded Powder-coated steel
GARAGE STORAGE STATION
Extends the bike rack 4-8”past rear-mounted spare tires
For 2” Dura, Elite, Element,Alumina3, Hyd. Assist Dura, Hang2, and Versa Bike Racks
Rugged powder-coated steel
EXTENDED HITCH BARGOOSENECK ADAPTER Adds 4” of height for low riding vehicles For use with any 2" vehicle receiver Rugged powder-coated steel
Bridges the gap from stem to seat tube Allows upright rack use with:
kids bikes, lady bikes, and stepthrough frames
For use with any bike rack Min Distance 15" Max Distance 21"
ITEM # 26442ITEM # 26373
BIKE BUMPERTOP TUBE ADAPTER
ITEM # 26260(4 Pack)
ITEM # 26458(50 Pack Fishbowl)
SOFT WRAPS (Hook and Loop)
Accessories
Protects bikes from contact damage against bike rack uprights
Durable and compression resistant For use on all upright Softride Racks Compatible with most brands of upright racks Includes 2 Soft Velcro Wraps 20” Tall, 3.5” Wide
Hook and loop straps for securing bikes or cargo
Countless uses include:Ski Tie, Pant Leg Tether, Cable Holder, Cage Holder
Useful with every Softride rack