About KVAL Machinery KVAL was started in the mid 1940’s by AA Kvalheim. A Norwegian trained furniture maker, who turned to cabinetmaking and carpentry, and eventually machinery manufacturing after immigrating to the United States. One prod-uct produced in the mid 40’s was a panel saw which helped expand the fledgling flush door industry that was developing around the Walled Lake, Michigan area. Early door sizing systems were supplied to companies like Young Door, Walled Lake, Arrow Door, and out on the west coast to Cal Wood Door. In the mid 1950’s, sons Andy and Irv Kvalheim joined in the business. As the company grew, so did the line of products. Door pre-hanging equipment was designed for distributors and high production equipment was designed for manufacturers producing pre-fit units. During the growth years of the 60’s, the company continued as an innovator in the industry with automatic machines for jamb processing, casing trimmers and updated door siz-ers. As the 70’s began, customers began demanding even more automa-tion to cut labor costs and improve product quality. Kval responded with bi-fold door assembly and pre-hanging machines featuring fully automatic screw driving systems. Today, Jerry, David, and Mark Kvalheim…the three grandsons of AA Kval-heim have joined the firm. The company family has also grown to include George Kameoka as head engineer, and Mark Smith as one of the manag-ing partners. KVAL products have continued to evolve and are now faster than ever, but are easier to set up, and produce higher quality doors than ever be-fore. Recent technical innovations include CNC controls and the complete replacement of air logic control systems with solid state programmable con-trollers. Fully automatic positioning and sequencing for door and jamb equipment. Digital readouts with touchscreen controls to guarantee accu-rate setup and operation. When looking for quality door, jamb, casing, and related machines, look to the leader in the industry for over six decades! Look to KVAL!!!
© KVAL Inc. All rights reserved
This document may not be copied, photocopied, reproduced, transmitted, or translated in any form or for any purpose without the express written consent of KVAL Inc.
KVAL Inc. reserved the rights, without notice, to change design and construction of any products.
Price are subject to change without notice. Errors in description, photography, or typographical errors are subject to correction.
Printed in the United States of America
Published on 10/1/2014
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
3 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Commander-DI Find
Co
mm
an
de
r-D
I
Commander-DI
The Commander-DI will accommodate either flush or raised molding doors with protrusions up to 7/8" high on one or both sides. These raised moldings must be a minimum of 4-1/4" from the lock and hinge sides of the door. The Commander-DI will also machine jambs that vary in thickness from 11/16" to 1-1/16" in thickness, at the same time as the door, or it can be used to machine jambs only. The jamb support brackets set-ups are Non-CNC controlled, and must be moved by the operator. These set ups however, can be done quickly and easily by the machine operator. Jamb width can vary from 3-1/2" to 7-1/4" when the jambs are attached to the door with hinges. Wider jambs can be machined along with the door and attached after the door has been fed out of the Commander-DI. Hinge sizes, 3-1/2" x 3-1/2", and 4" x 4", can be attached while the door and jamb are clamped in the machine. The door and jamb may also be machined for 4-1/2" x 4-1/2" hinges; however, the hinges can be attached only to the door or jamb while they are clamped in the machine. NOTE: If pilot hole drilling for the hinge screws is required for this machining set up, specify drill gearbox option A-3. If machining for 4-1/2" x 4-1/2" and attaching the hinge to the door and jamb while clamped in the machine is required, option HA is required to revise the jamb supports allow for the in-creased space between the door and jamb. The Commander-DI is also equipped with a computer controlled pre-drill system, which uses manually installed drill gearboxes complete with air motors and chucks, to drill pilot holes for the hinge screws. Each drill gearbox is also equipped with locating brackets and mounting base to allow for quick change from one drilling pattern to another. The pilot hole drill gearboxes are sold separately, and are made to match the screw hole pattern for each type of hinge. Pilot hole drill gearboxes for 3-1/2" x 3-1/2", 4" x 4", 4-1/2" x 4-1/2" full or half hinges are listed in the options. Machining Parameters: • 1-3/8” – 2-1/4” door thickness • 18”– 48” door width • 6’6”–10’ door length including raised molding doors with moldings up to 7/8" high, and located not less than 4-1/4” from the door edge. • Jamb width without adjustment from 3-1/2” to 7-1/4” for pre-hanging. • Hinge knuckle height to 5” (max 4-1/2”x 4-1/2” for pre-hanging) • 1/4" OR 5/8” hinge radius • No Hinge, 2 hinge, 3 hinge, 4 hinge machining sequence • No Lock, 1 lock, or automatic 2 lock machining
4 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Tooling
Wrench For Perske Motor KNS22-08-2-0204, Manual Quick Change KVAL P/N: PERSP0300050
Twist Drill, 1/4" Dia X 70mm Long, 10 X 23 Shank Brad Point, Right Hand Twist KVAL P/N: TD0470-BP
Collet, 1/2", 1 and 2 HP, Perske Motors and 1.5 HP Colombo motor. KVAL P/N: PERER20-1/2
Cover Nut, ER20 (1/2) Collet Used on 1 HP and 2 HP Perske Motor. KVAL P/N: PERER20C
Chuck, Replacement Chuck For the Perske Motor KNS22-08-2-0204, Self clamping chuck holder KVAL P/N: PERSP0300043
Sipp Cutter Blade (#13) KVAL P/N: SIP013
Arbor 1/2 Dia Shank 1/4-28 Thread 2-1/2 OAL (BOS82818). KVAL P/N: KVARBOR18A
Arbor 1/2 Dia Shank 1/4-28 Thread 2-3/8 OAL KVAL P/N: KVARBOR18A1
Twist Drill, 4mm Dia, 70mm Long, 10 X 23 Shank Brad Point, Right Hand Twist . KVAL P/N: TD04M70-BP
Router Bit, Spin On, 1-1/4" Dia, 1/4-28 Thread KVAL P/N: RBSO1250-4
Shaft Wrench,22MM, 1 and 2 HP Perske Mo-tor and 1.5 hp Columbo motor With 1/2 Collet Capacity. KVAL P/N: WRENCH22MM
Strain Relief Connector, M20 x 1.5 Cable Range in inches .354—.512. KVAL P/N: 2532M20B
Sipp Cutter Blade (#13), Buy 4 Get 1 FREE KVAL P/N: SIP013-PROMO
Drill Bit, High Speed Steel, 1/8 Stub Length KVAL P/N: SLD1250
Collet Wrench, ER20 Series, 1/2" Collet, 1 and 2 HP Perske (Fingers) KVAL P/N: PERER20W
Rear Fan Cover with Electrical Fitting Hole, Perske 1 & 2 HP Motor . KVAL P/N: 804C
Strain Relief Connector, Straight, 2522, 1/2 Hub Cable Range in inches .375—.500. KVAL P/N: 2522
5 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Frame & Feed Find
Co
mm
an
de
r-D
I
Pulley, Single Sheave Belt Pulley Assembly KVAL P/N: 604A
Pulley, BK55H Pulley Single Sheave 5-OD 1.997 Bore with Oilite (Modified) (Auto-Feed), Hex Pulley KVAL P/N: BROBK55HY
Taper Bushing, Split, G X 14MM KVAL P/N: BROG14MM
Motor, Inverter Duty, 3/4 HP, 17525 RPM, 56C, 3 Phase 460/230V . KVAL P/N: BALIDNM3542
Motor 3/4 HP 1140 RPM TEFC 56C 208-220/440 Volt KVAL P/N: BALVM3543
Gearbox, 90 Degree 1:1 Ratio, 1" Bore RH Float-A-Shaft KVAL P/N: BRA4304-0344
Photo Eye Blowoff Kit - Includes (1) HUMBF1, (1) HUMSEF, (1) HUMBF, (2) NUTCJ375, and (1) 236C (1-1/2 LG Thread). KVAL P/N: 90F3-003
Frame & Feed
Gearbelt Pulley, 14 Groove, 2.174 O.D., 14HG100, Use G Bushing . KVAL P/N: BRO14HG10
Sprocket, 4014 X 1 Bore KVAL P/N: BRO401406
Pulley, Gearbelt, BK55H, Single Sheave 5" OD Tapered Bore, Modified KVAL P/N: BROBK55HX
Taper Bushing, Split, 4016 X 1 Bore . KVAL P/N: BROH16
Shuttle Valve, 1/4", SV20B, NPT KVAL P/N: DELSV20B
Hairline Pointer, Plastic KVAL P/N: HLPOINTR1
FMCBES Model 625 Clutch-Brake Com . KVAL P/N: HOR801623
Bearing, FB 160 X 1", 2 Hole Mount, Setscrew Locking Relube KVAL P/N: HUBFB1603
Bearing, FB 260 X 1", 2 Hole Mount, Setscrew Locking Relube. KVAL P/N: HUBFB2603
6 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Frame & Feed
Wheel, 3" Dia. X 1-1/4" Wide 3/8" ID Wheel With Simi Precision Roller Bearing KVAL P/N: INDXS0303106
Handle, Kip 3/8-16 Thread, 1.56 Stud, Adjusta-ble KVAL P/N: KIP38254
Air Piloted Valve, Humphrey 250A-3-10-20, Normally Closed 1/4" (6.4mm), 3-Way Pilot KVAL P/N: HUM250A01
Valve, Humphrey, Air Piloted 501A-3-12-20, 1/2 Ports, 275 CFM AT 125 PSI 2&3WAY,N/0&C KVAL P/N: HUM501A
Bearing, 1-1/2" Open Super Linear Pillow Block KVAL P/N: INASPB240
Radial Ball Bearing,77R12,3/4" Bore KVAL P/N: NAC77R12
Bearing, Pillow Block, PB 250 X 1, Setscrew Locking Relube. KVAL P/N: HUBPB2503
Bearing, Pillow Block, TPB 250 X 1, Tapped Base Setscrew Locking Relube. KVAL P/N: HUBTPB253
LoveJoy, L095 Coupling Body, 1" Bore, Part of 3 Piece Flexible Coupling . KVAL P/N: LOVL09516
Servo Motor, 3", 2400 rpm, 27.5 in/lbs, 3.7 amps or MPM892BSG7G1N KVAL P/N: MPM892BTG7G1N
Seal 1/2-ID .875 OD Single Lip KVAL P/N: SEAL08
Seal 1-ID 1.567-OD Single Lip KVAL P/N: SEAL16
Rod End Male, TRE-6, 3/8 Bore, 3/8-24 Male Thread Shank End KVAL P/N: RODEND06M
Rod End Male, 3/8-24 NF Left Hand KVAL P/N: RODENDCB6
Ruler,1-1/2" x 38", Plastic Adhesive backed reading Left to Right 16-52,White/Green/Red Graphics, 1" blank at Ends, Top Coated. KVAL P/N: RULE1652
Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R
7 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Frame & Feed Find
Co
mm
an
de
r-D
I
Regulator, Bracket, 1/4" Mini KVAL P/N: SMC20001Y
Valve,VQC4100-5 or VQC4101-5 SMC Valve Without Base, Single Acting 24VDC. KVAL P/N: SMCVQC4100-5
Valve,VQC4100-5 AND VQ4000 SMC Valve with 1/4 National Pipe Thread Base Single Acting. KVAL P/N: SMCVQC4100-5A
Lubricator 1/2" NPT, SMC, AL40-N04-Z KVAL P/N: SMC40004L
Regulator 1/2" NPT, SMC, AR40K-N04-Z KVAL P/N: SMC40004R
Regulator, SMC, 1/2" NPT Port With Back-flow Mechanism With Gauge KVAL P/N: SMC40004R-K
Filter, 1/2" With Auto Drain, SMC, AF40-N04D-Z KVAL P/N: SMC40004F
Frame & Feed
Pressure Gauge, SMC, K40, 1/8 NPT Thread, 160 PSI . KVAL P/N: SMCK10
Pressure Gauge, SMC, K50, 1/4 NT Thread, 160 PSI KVAL P/N: SMCK12
Hytrel Spider or Connector for the 090 and 095 Series Flexible Couplings. . KVAL P/N: SPIDER005-H
Generation 2, 25mm STAR Ball Rail Bearing STA165121420 With (2)161922130 Seals In-stalled KVAL P/N: STA165121420S
Tape 12' Stick-Down 1/2 Wide Reads L-R KVAL P/N: TAPE12RI
Timken Bearing Race for the Ball Screw Hous-ing (20mm) . KVAL P/N: TIMLM11710
Timken Bearing for Ball Screw Housing (20mm) 8.45 KVAL P/N: TIMLM11749
8 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Lower Head Assy
Cylinder, Bimba 090.5D 1/2 Double Acting Front Nose Mount 1-1/16 Bore KVAL P/N: BIM090UD
Cylinder, Bimba 121D 1" Double Acting Front Nose Mount 1-1/4 Bore. KVAL P/N: BIM121D
Cylinder, Advance, Hardware, 240 & 300 Se-ries, Clevis KVAL P/N: ADV240M01
Cylinder, Advance, Hardware, 300 Series, Clevis Single Mount KVAL P/N: ADV300M03
Cylinder, Advance, 490 X 1" KVAL P/N: ADV490A17
Front Section
Spring 1-25/64-OD 7" LG 7/8-ID .207 W C/G Bpr Spg 110Saw K-17 SPG0702 KVAL P/N: 570700A
Micro Mini Pre-Wired Rotary Enclosed Switch 914CE16-9 or OMRON D4C-1620 KVAL P/N: 914CE169
Cylinder, Bimba, Hardware, 120,170 Foot Bracket .75 Bore 2.50 Long Slotted Base . KVAL P/N: BIMD241
Belt, Gearbelt, 1" Wide, 40 Teeth, 150L100 KVAL P/N: BLT150L10
Sleeve Valve, 3/8", 3-Way KVAL P/N: FOS3W375
Limit Switch, Standard, Micro Switch 1LS312L KVAL P/N: LIMITSWAA
Gearbelt Pulley, 18 Groove, 2.119 O.D., 18LG100, Use G Bushing KVAL P/N: BRO18LG10
Flange Ball Screw Nut, 40mm Dia., Adjusta-ble, 20mm Lead KVAL P/N: BSNUT40B
Limit Switch Arm Outside Offset 1-1/2 Radius with 3/4 Wheel 1/4 Wide . KVAL P/N: LSZ55D
Gearbelt Pulley, 14 Groove, 2.174 O.D., 14HG100, Use G Bushing . KVAL P/N: BRO14HG10
Taper Bushing, Split, G X 14MM KVAL P/N: BROG14MM
9 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Lower Head Assy Find
Co
mm
an
de
r-D
I
Servo Motor AC, 45 in-lbs Continuous Torque 3000 RPM Continuous 4200 RPM Max.) KVAL P/N: MPM1141ATG7G1N
Speed Controller, One-touch Fitting, 1/4 NPT - 3/8" OD, Elbow & Universal Types, NAS2201F-N02-11S KVAL P/N: SMCAS2201F4
Air, Muffler, 1/4 Thread, Bronze Screen . KVAL P/N: MUFFLER04
Ball Bearing, 5201ZZ, .4724 5201-2NS KVAL P/N: NAC5201ZZ
Lower Head Assy
Front Section
Turck BI2-G12K-AN6X-7M Inductive Prox-imity Switch 12MM Dia. 24 VDC (30MM Length). KVAL P/N: SHORT12DC
Speed Controller, One-touch Fitting, 1/8 NPT - 1/4" OD, Elbow & Universal Types, NAS2201F-N01-07S KVAL P/N: SMCAS2201F1
Valve, VQC4200-5 SMC Valve Without Base, Double Acting, 24VDC . KVAL P/N: SMCVQC4200-5
Valve, Blanking Kit, SMC KVAL P/N: SMCVVQ4000-10A-1
Manifold, Station Tie Rod, VQC4000 Series SMC Valve KVAL P/N: SMCVVQ4000-14
Tapered Roller Bearing Race, Single Row Use with Tapered Roller Bearing TIM28985 KVAL P/N: TIM28921
Servo Motor, 3", 2400 rpm, 27.5 in/lbs, 3.7 amps or MPM892BSG7G1N KVAL P/N: MPM892BTG7G1N
Seal 1/2-ID .875 OD Single Lip KVAL P/N: SEAL08
Seal 1-ID 1.567-OD Single Lip KVAL P/N: SEAL16
Valve,VQC4100-5 or VQC4101-5 SMC Valve Without Base, Single Acting 24VDC. KVAL P/N: SMCVQC4100-5
Generation 2, 25mm STAR Ball Rail Bearing STA165121420 With (2)161922130 Seals In-stalled KVAL P/N: STA165121420S
Timken Bearing Race for the Ball Screw Hous-ing (20mm) . KVAL P/N: TIMLM11710
10 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Lower Head Assy
Front Section
Timken Bearing for Ball Screw Housing (20mm) 8.45 KVAL P/N: TIMLM11749
11 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Upper Head Assy Find
Co
mm
an
de
r-D
I
Cylinder, Fabco Pancake D-121-X 1/2 Stroke, 1-1/8 Bore KVAL P/N: FABD121X
Cylinder, Stroke Pancake X-121-X 3/4 1-1/8 Bore Fabco. KVAL P/N: FABX121X
Cylinder, Advance, 300 X 5" . KVAL P/N: ADV300A1R
Cylinder, Advance, 490 X 4" KVAL P/N: ADV490A1K
Belt, Gearbelt, 1" Wide, 50 Teeth, 187L100 KVAL P/N: BLT187L10
Upper Head Assy
Front Section
Gearbelt Pulley, 20 Groove, 2.357 O.D., 20LG075, Use G Bushing . KVAL P/N: BRO20LG75
Taper Bushing, Split, G X 19MM KVAL P/N: BROG19MM
Router, Perske, KNS22-08-2, .5 KW, 18,000 - 24,000 RPM, 300/400 Hz KVAL P/N: PERKNS22082
Cylinder, Fabco Pancake RK-121 Repair Kit - 121 Series . KVAL P/N: FABRK121
Shuttle Valve, 1/4", SV20B, NPT KVAL P/N: DELSV20B
Valve, Humphrey, Air Piloted 501A-3-12-20, 1/2 Ports, 275 CFM AT 125 PSI 2&3WAY,N/0&C KVAL P/N: HUM501A
Radial Ball Bearing,77R12,3/4" Bore KVAL P/N: NAC77R12
Servo Motor, 3", 2400 rpm, 27.5 in/lbs, 3.7 amps or MPM892BSG7G1N KVAL P/N: MPM892BTG7G1N
Cylinder, Advance, Hardware, 240 & 300 Se-ries, Clevis KVAL P/N: ADV240M01
Micro Mini Pre-Wired Rotary Enclosed Switch 914CE16-9 or OMRON D4C-1620 KVAL P/N: 914CE169
Sleeve Valve, 3/8", 3-Way KVAL P/N: FOS3W375
Router Perske, 2HP, 230/380V 300-400Hz, 18000-24000 RPM, 1/2 Collet Capacity (Includes Wrenches) KVAL P/N: PERKRIS35.5-2D
12 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Upper Head Assy
Speed Controller, Standard, 1/4" Right Angle, 1/4 NPT,Metal Body Elbow Style KVAL P/N: SMCAS2102
Front Section
Speed Controller, In-line, 1/4" . KVAL P/N: SMCAS3002
Generation 2, 15mm STAR Ball Rail Bearing STA165111420 With (2)161912120 Seals In-stalled. KVAL P/N: STA165111420S
Seal 1/2-ID .875 OD Single Lip KVAL P/N: SEAL08
Seal 1-ID 1.567-OD Single Lip KVAL P/N: SEAL16
Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R
Regulator, Bracket, 1/4" Mini KVAL P/N: SMC20001Y
Pressure Gauge, SMC, K40, 1/8 NPT Thread, 160 PSI . KVAL P/N: SMCK10
Valve,VQC4100-5 or VQC4101-5 SMC Valve Without Base, Single Acting 24VDC. KVAL P/N: SMCVQC4100-5
Valve,VQC4100-5 AND VQ4000 SMC Valve with 1/4 National Pipe Thread Base Single Acting. KVAL P/N: SMCVQC4100-5A
Generation 2, 25mm STAR Ball Rail Bearing STA165121420 With (2)161922130 Seals In-stalled KVAL P/N: STA165121420S
Timken Bearing Race for the Ball Screw Hous-ing (20mm) . KVAL P/N: TIMLM11710
Timken Bearing for Ball Screw Housing (20mm) 8.45 KVAL P/N: TIMLM11749
Speed Controller, One-touch Fitting, 1/8 NPT - 1/4" OD, Elbow & Universal Types, NAS2201F-N01-07S KVAL P/N: SMCAS2201F1
Speed Controller, One-touch Fitting, 1/4 NPT - 3/8" OD, Elbow & Universal Types, NAS2201F-N02-11S KVAL P/N: SMCAS2201F4
13 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Pre-Drill Gear Box Find
Co
mm
an
de
r-D
I
Cylinder, Advance , Hardware, 240 Series, Clevis Double Mount With Pin & Snap Rings. KVAL P/N: ADV240M02
Gearbelt Pulley, 20 Groove, 2.357 O.D., 20LG075, Use G Bushing KVAL P/N: BRO20LG75
Pre-Drill Gear Box
Front Section
Generation 2, 15mm STAR Ball Rail Bearing STA165111420 With (2)161912120 Seals In-stalled. KVAL P/N: STA165111420S
14 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Back Section
Collet, 1/2" Capacity, 1/2"-33/64" Capacity, AF123 KVAL P/N: ACUAF123
Cylinder, Advance, Hydraulic, 490 X 5" KVAL P/N: ADV490H1R
Pulley, Single Sheave Belt Pulley Assembly KVAL P/N: 604A
Cover Nut, ACU 9400005 KVAL P/N: ACU940005
Collet, 1/2-3/4 Capacity KVAL P/N: ACUAF122
Wrench for the Acuraflex Nut Material:CRS Stock Size:1/4 X 2 X 10-1/2 KVAL P/N: 15-00-ER32
Router Bit, 2-Wing, 2-1/8" Dia, Carbide Tipped, 1/2" Shank KVAL P/N: 2WB34-CT
Motor, 3-HP, 3450 RPM, Machined with Taper 145T Frame, 208/230-460V, 60 HZ, 35R202T123. KVAL P/N: BALM35R202T123
Motor, 5-HP, 3450 RPM, Machined with Taper 184T Frame With Seal 400281, 208/230-440V, 60 HZ KVAL P/N: BALM36K887X100S
Cylinder, Bimba 242DXDE 2" Double Acting Double End Rod Mount 1-3/4 Bore. KVAL P/N: BIM242DXD
Cylinder, Bimba 122DP 2" Double Acting Rear Pivot Double End Mount 1-1/4 Bore. KVAL P/N: BIM122DP
Cylinder, Bimba 2420DP 20" Double Acting Rear Pivot Double End Mount 1-3/4 Bore. KVAL P/N: BIM2420DP
Cylinder, Bimba 1212DP 12" Double Acting Rear Pivot Double End Mount 1-1/4 Bore. . KVAL P/N: BIM1212DP
Cylinder, Bimba 241DP 1" Double Acting Rear Pivot Double End Mount 1-3/4 Bore. KVAL P/N: BIM241DP
Collet, 5/8-3/4 Capacity KVAL P/N: ACUAF130
Fasteners,Flat Head,5/16-18 X 1", Grade 8 KVAL P/N: 312CFS100
15 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Back Section Find
Co
mm
an
de
r-D
I
Gearbelt Pulley, 22 Groove, 3.447 O.D., 22HH100, Use H Bushing KVAL P/N: BRO22HH10
Sleeve Valve, 1/4", 3-Way KVAL P/N: FOS3W250
Idler Shaft, 1" Dia, 4-3/8" OAL, 3/4-10 Thread . KVAL P/N: BRON3
Flange Ball Screw Nut, 32mm Dia., 10mm Lead, 1512-3-4013 KVAL P/N: BSNUT32AO
Back Section
Cylinder Hardware, Bimba 240 Foot Mount Bracket 1.037 Bore, 3" Long Slotted Base KVAL P/N: BIMC1337
Cylinder, Bimba, Hardware, 2 Piece Pivot Bracket, .250 Bore 2.12 Slotted Base . KVAL P/N: BIMD1360
Cylinder, Fabco Pancake E-121-X 1" Stroke, 1-1/8 Bore KVAL P/N: FABE121X
Cylinder, Stroke Pancake X-121-X 3/4 1-1/8 Bore Fabco. KVAL P/N: FABX121X
Taper Bushing, Split, H X 19MM KVAL P/N: BROH19MM
Chipout, Back Section Lock Bevel Material: Ryertex Stock Size: 5/16 X 3-1/2 X 4 KVAL P/N: CHIPOUT05
Cylinder, Fabco Pancake B-221-X 1/2 Stroke, 1-5/8 Bore KVAL P/N: FABB221X
Hairline Pointer, Plastic KVAL P/N: HLPOINTR1
Cylinder, Bimba, Hardware, 120,170 Foot Bracket .75 Bore 2.50 Long Slotted Base KVAL P/N: BIMD241
Flat Washer, 1" I.D. 1-1/2" O.D. 1/16" Thick, Shim for N2 & N3 Tightener Shaft . KVAL P/N: BRON2WSHR
Cylinder, Fabco Pancake RK-221 Repair Kit - 221 Series KVAL P/N: FABRK221
Cylinder, Fabco Pancake RK-121 Repair Kit - 121 Series KVAL P/N: FABRK121
Bearing, FB 260 X 1", 2 Hole Mount, Setscrew Locking Relube. . KVAL P/N: HUBFB2603
Bearing, Pillow Block, TPB 250 X 1, Tapped Base Setscrew Locking Relube. KVAL P/N: HUBTPB253
Air Piloted Valve, Humphrey 250A-3-10-20, Normally Closed 1/4" (6.4mm), 3-Way Pilot KVAL P/N: HUM250A01
Bearing, 1-1/2" Open Super Linear Pillow Block KVAL P/N: INASPB240
Valve, Humphrey, Hardware, 8-20A Mounting Base for HUM250A01 & HUM250A02 KVAL P/N: HUM820A
Bearing, Modified KGXO-24PP 1-1/2" Open Super Linear Pillow Block . KVAL P/N: INASPB240M
16 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Back Section
Chuck Tapered 1" KVAL P/N: KVASC0032
Shock Absorber, Gas Operated, Kayaba, KG5406 KVAL P/N: KYBKG5406
Linear Bearing Block With Standard 1 Bearing & 2 Seals 2-3/4 Long 2 Square. KVAL P/N: KVALBB16A
Linear Bearing Block, With Steel Linear Ball Bearing, 1" Dia., 2 Seals & Zirk Fitting Hole, 2-3/4" Long 2 Square. KVAL P/N: KVALBB16B
Chuck Tapered 7/8" KVAL P/N: KVASC0028
Handle, Kip 5/16-18 Thread, 2.72 Stud Adjust-able Handle GN300-63 KVAL P/N: KIP38158-BS
Linear Bearing Block, With Standard 3/4 Bear-ing & 2 Seals, 2" Long, 1-1/2 Square KVAL P/N: KVALBB12A
Chain, Offset Link, 40 Chain KVAL P/N: LIN400002
Fastener,Internal Snap Ring, Used With KVAL Chuck #28 & #32 KVAL P/N: KVASC0098
Retainer -- Tapered Chucks (SC0028 and SC0032) KVAL P/N: KVASC0099
17 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Back Section Find
Co
mm
an
de
r-D
I
Regulator, Bracket, 1/4" Mini KVAL P/N: SMC20001Y
Speed Controller, Standard, 1/8" Right Angle, 1/8 NPT,Metal Body Elbow Style. KVAL P/N: SMCAS2101
Speed Controller, Standard, 1/4" Right Angle, 1/4 NPT,Metal Body Elbow Style KVAL P/N: SMCAS2102
Back Section
Reservoir Hydraulic, Monnier, 2-1750 KVAL P/N: MON21750
Seal, 1.25 I.D. X 1.629 O.D. X 3/16 Thick KVAL P/N: SEAL12329
Seal, 1.254" O.D. X .875" I.D., Single Lip KVAL P/N: SEAL8624
Split Collar, One Piece, 3/4" Dia., Steel KVAL P/N: SC112F
Split Collar, Two Piece, 1" Dia., Steel KVAL P/N: SC216F
Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R
Router Bit, Spin On, 1/2" Dia, 1/4-28 Thread, Reverse Helix, KV55253 KVAL P/N: RBSO500
Split Collar, One Piece, 1" Dia., Steel KVAL P/N: SC116F
Speed Controller, In-line, 1/8" KVAL P/N: SMCAS2001
Seal, V-Ring Seal For Motor Shafts, Baldor 5HP Motor, 400281 KVAL P/N: SEAL400281
Seal 1-ID 1.567-OD Single Lip KVAL P/N: SEAL16
Pneumatic Air/Oil Reservoir, 2-1750, Bowl and Gaskets Kit for Monnier Reservoir, 3-3/8" O.D. KVAL P/N: MON24555
Reservoir Bowl Gasket, Fits 2-1750 Bowl, Monnier 82747 . KVAL P/N: MON82747
Valve,VQC4100-5 AND VQ4000 SMC Valve with 1/4 National Pipe Thread Base Single Acting KVAL P/N: SMCVQC4100-5A
Valve, SMC 4-Way Single Pilot With 1/4 Base KVAL P/N: SMCNVSA03
Valve,VQC4100-5 or VQC4101-5 SMC Valve Without Base, Single Acting 24VDC KVAL P/N: SMCVQC4100-5
Twist Drill, 1" Dia, 4" Twist, Brad Point, Car-bide Tipped, 1/2" Shank, 6" OAL. . KVAL P/N: TD1664-BPCT
Pump Wrench, 1-5/8" Thin Pattern KVAL P/N: WRENCH026
Speed Controller, In-line, 1/4" KVAL P/N: SMCAS3002
Pressure Gauge, SMC, K40, 1/8 NPT Thread, 160 PSI KVAL P/N: SMCK10
Valve, VQC4200-5 SMC Valve Without Base, Double Acting, 24VDC KVAL P/N: SMCVQC4200-5
18 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Back Section
Retaining Ring, External, 3/4" KVAL P/N: THOPR750
Bearing, Super 16, 1" Closed Linear Ball Bear-ing KVAL P/N: THOLBB16
19 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Jamb Clamp Find
Co
mm
an
de
r-D
I
Cylinder, Advance, Hardware, 240 & 300 Se-ries, Clevis KVAL P/N: ADV240M01
Bearing, 1" Closed Super Linear Pillow Block KVAL P/N: INASPBC160
Cylinder, Advance, Hardware, 490 Series, Clevis Double Mount With Pin & Snap Rings KVAL P/N: ADV490M02
Cylinder, Bimba 122DP 2" Double Acting Rear Pivot Double End Mount 1-1/4 Bore. KVAL P/N: BIM122DP
Jamb Clamp
Toggle Clamp, Model 56040, 4-3/4" Long, 5/16-18 Female Thread KVAL P/N: DES604
Cylinder, Stroke Pancake G-121-X 1-1/2 Cyl-inder, Bore Fabco 1-1/8. KVAL P/N: FABG121X
Pad, Delrin 1" Dia X 7/16" NF Thread . KVAL P/N: P161607FD
Pad, Felt, 2" Dia X 1/8" KVAL P/N: P320200-F
Pad, Aluminum 2" Dia X 5/16 Thick KVAL P/N: P320505-A
Cylinder, Advance, 490 X 1" KVAL P/N: ADV490A17
Cylinder, Bimba 124DP 4" Double Acting Rear Pivot Double End Mount 1-1/4 Bore. KVAL P/N: BIM124DP
Air Hose, 5 Bonded Coiled Hose, 10 FT, Tube 1/4", With 8" Tails, Stacked Configuration KVAL P/N: BUCM29720
Valve,VQC4100-5 or VQC4101-5 SMC Valve Without Base, Single Acting 24VDC. KVAL P/N: NAC77R08
Speed Controller, One-touch Fitting, 1/8 NPT - 1/4" OD, Elbow & Universal Types, NAS2201F-N01-07S KVAL P/N: SMCAS2201F1
Cylinder, Bimba, Hardware, 120,170 Foot Bracket .75 Bore 2.50 Long Slotted Base . KVAL P/N: BIMD241
Cylinder, Fabco Pancake RK-121 Repair Kit - 121 Series KVAL P/N: FABRK121
Speed Controller, One-touch Fitting, 1/4 NPT - 1/4" OD, Elbow & Universal Types, NAS2201F-N02-07S KVAL P/N: SMCAS2201F2
20 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Jamb Clamp
21 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Operator Workstation Find
Co
mm
an
de
r-D
I
Mushroom Knob, Black, Square D, 1-3/8 in. Screw-on for KR24 and SKR24 KVAL P/N: K92B
Non-Illuminated Pushbutton Operator Push - Momentary; Pull - Maintained, Square D KVAL P/N: KR9
Pushbutton Contact Square D 1-NC Red KVAL P/N: KA3
Pushbutton Operator, Non-Illuminated , Mush-room, Momentary, Type: K, Size: 30mm, Square D KVAL P/N: KR20
Operator Workstation
Dual Pushbutton Non-Illuminated, (2) Momen-tary, Start/Stop, 1 N.O. & 1 N.C. Contact,Type: KX, Size: 30mm, 10A. KVAL P/N: KXRC136
Push/Pull Knob, Yellow, Square D, for KR8, KR9, SKR8, SKR9 Operators KVAL P/N: Y22
Pushbutton Contact Square D 1-NO Green KVAL P/N: KA2
Pushbutton Non-Illuminated, Momentary, Green Button, 1 N.O Contact, Type: K, Size: 30mm, 10A, 600V, Square D KVAL P/N: KR24GH36
Pushbutton Illuminated, Maintained (Push/Pull), 2 Position, Green Button, 2 N.C. Con-tact,Type: K, Size: 30mm, 10A Square D KVAL P/N: KR9P1GH8
22 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Electrical
Relay, Finder, General Purpose Realy, 55.34.8.120.0050, 4PDT, 120 V AC Coil (50/60Hz), 7A, 14 Pin KVAL P/N: 55.34.8.1200050
Micro Mini Pre-Wired Rotary Enclosed Switch 914CE16-9 or OMRON D4C-1620 KVAL P/N: 914CE169
Grounding Terminal Block Entrelec, Green/Yellow, 24-10 AWG, 6mm Width Electrically Connected to Rail, 016580901 KVAL P/N: 016580901
Terminal End Section, Entrelec 11836816 KVAL P/N: 11836816
Relay Interface Mod-ule,FINDER,38.51.7.024.0050,24VDC KVAL P/N: 385170240050
End Plate For Grounding Terminal Block, En-trelec 01036221 KVAL P/N: 01036221
Terminal Block, 6mm, 30A, Grey, Screw 30A/600V Max., Accepts 24-10 AWG Wire M4/6, Screw Terminal KVAL P/N: 011511607
Relay, Finder Relay Socket 94.04 For Relay Type 55.34... . KVAL P/N: 94.04
Thermal Overload Relay, Class 10 6-9A. KVAL P/N: CGT-22-9.0
PLC, OpenNet, Relay Output Module, 16PT KVAL P/N: FC3A-R161
PLC, IDEC MicroSmart, 24 I/O PLC KVAL P/N: FC4A-C24R2
PLC, OpenNet, Controller, IDEC KVAL P/N: FC3A-CP2K
PLC, OpenNet, Input Module 24 VDC, 16 Point, IDEC. KVAL P/N: FC3A-N16B1
Sensor, Fixed Range, 2" Fixed Field, 24 Volts DC, 18mm Dia. . KVAL P/N: DIFUSEFF2-M12
PLC, OpenNet, Expansion Power Supply KVAL P/N: FC3A-EA1
Relay, FINDER, 34.51.7.024.0010, 24VDC, SPDT Interface Relay KVAL P/N: 345170240010
23 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Electrical Find
Co
mm
an
de
r-D
I
PLC, Microsmart, 16 Input, 24 VDC Module KVAL P/N: FC4AN16B1
Limit Switch, Standard, Micro Switch 1LS312L KVAL P/N: LIMITSWAA
Contactor, LG, 40 Amps . KVAL P/N: GMC-40A-120
Pushbutton Contact Square D 1-NO Green KVAL P/N: KA2
Electrical
PLC, Microsmart, 8 Input, 24 VDC Module . KVAL P/N: FC4AN08B1
Non-Illuminated Pushbutton Operator Push - Momentary; Pull - Maintained, Square D KVAL P/N: KR9
Selector Switch Operator Maintained, 4 Posi-tion, Non-Illuminated, Type: K, Size: 30mm, Square D KVAL P/N: KS88
Limit Switch Arm Outside Offset 1-1/2 Radius with 3/4 Wheel 1/4 Wide . KVAL P/N: LSZ55B
Limit Switch Arm Outside Offset 1-1/2 Radius with 3/4 Wheel 1/4 Wide KVAL P/N: LSZ55D
Cord M12 Conn 4 Wire DC 5 Meters KVAL P/N: M12-4PIN-DC-5M
Disconnect Shaft Stromburg 3/16" X 3/16" X 10-1/2" OAL KVAL P/N: OETLZS49
PLC, Microsmart, 8 Relay Output Module KVAL P/N: FC4AR081
Pushbutton Contact Square D 1-NC Red KVAL P/N: KA3
Pushbutton Non-Illuminated, Momentary, Green Button, 1 N.O Contact, Type: K, Size: 30mm, 10A, 600V, Square D KVAL P/N: KR24GH36
Limit Switch Low Pre-Travel, Micro Switch 1LS319L KVAL P/N: LIMITSWBB
Cord M12 conn 4wire DC 5 Meters Cable 90 Deg Fitting KVAL P/N: M12-4PIN-DC-5M-RA
Pistol Handle, Red/ Black, Nema 1, 3R, 12 Accepts 6mm SQ Shaft, 65mm Handle Pad-lockable. KVAL P/N: OHB65J6
24 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Electrical
Power Pole For OT63E3 KVAL P/N: OTPS63EP
Disconnect 6mm Shaft, 290mm long. KVAL P/N: OXP6X290
Disconnect Switch, 80 Amp, 3 Poles, ABB, OT80F3, 1SCA105798R1001 KVAL P/N: OT80F3
Disconnect, Neutral For OT63E3 KVAL P/N: OTPN63EP
Power Supply, PLC, 24V DC, 1.3 Amps, Input: 100-240, 30 Watts, IDEC KVAL P/N: PS5R-SC24
Drive,VM7 230V 2HP VM721P5 KVAL P/N: VM7-230V-2HP
Turck B12-G12K-AN6X-7M Inductive Prox-imity Switch 12MM Dia. 24 VDC (30MM Length).. KVAL P/N: SHORT12DC
Limit Switch Arm,Wide Wheel, 2" Radius with 11/16 DIA X 11/16 Wheel KVAL P/N: WL1A200
25 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in Chipout Find
Co
mm
an
de
r-D
I
Chipout, Back Section Lock Bevel Material: Ryertex Stock Size: 5/16 X 3-1/2 X 4 KVAL P/N: CHIPOUT05
Chipout, Commander-Di, Hinge Router, 5/8" Radius (1-1/4" Bit), Natural Canvas Phenolic, 3/4 X 3/4 X 1-7/16 LG KVAL P/N: CHIPOUT81
Chipout
Chipout, Commander-Di, Hinge Router, 5/8" Radius (1-1/4" Bit), Natural Canvas Phenolic, 3/4 X 3/4 X 1-7/16 LG KVAL P/N: CHIPOUT77
Chipout, Commander-DI, Hinge Router, 5/8 Radius (1-1/4" Bit); Material: Ryertex Stock Size: 3/4 X 3/4 X 1-3/16 KVAL P/N: CHIPOUT82
Knob, DK-83, 4-Prong (1-1/4 Dia) 1/4-20 X 7/16 Deep Blind Hole Brass Insert. KVAL P/N: REIDK83
Washer, 1/4-ID 7/16-OD 1/16 Thick KVAL P/N: WSHR1416-.375
Mechanical
Pneumatic
Cylinder, Bimba 1212DP 12" Double Acting Rear Pivot Double End Mount 1-1/4 Bore. KVAL P/N: BIM1212DP
Speed Controller, One-touch Fitting, 1/8 NPT - 1/4" OD, Universal Types KVAL P/N: SMCAS2301F
Cylinder, Bimba 123D 3" Double Acting Front Nose Mount 1-1/4 Bore. KVAL P/N: BIM123D
Valve, SMC 4-Way Single Pilot Without Base. KVAL P/N: SMCNVSA01
Filter, 1/2" With Auto Drain, SMC, AF40-N04D-Z KVAL P/N: SMC40004F
Valve, SMC 4-Way Double Pilot Without Base. KVAL P/N: SMCNVSA04
Speed Controller, In-line, 1/8" KVAL P/N: SMCAS2001
Cylinder, Bimba, Hardware, 120,170 Foot Bracket .75 Bore 2.50 Long Slotted Base KVAL P/N: BIMD241
26 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Order Today! Call 1.800.553.5825
Co
mm
an
de
r-D
I
Notes
PHONE: 1-800-553-5825 | FAX: 1-707-762-0485 | WWW.KVALINC.COM | E-mail [email protected]
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY
Parts Order Form
Shipping Preference ___ UPS Next Day Early AM ___ FedEx Priority Overnight ___ UPS Next Day ___ FedEx Standard Overnight ___ UPS 2nd Day ___ FedEx 2nd Day ___ UPS 3 Day Select ___ FedEx Express Saver ___ UPS Ground ___ FedEx International Priority ___ Common Carrier ___ FedEx International Standard
Remember: UPS requires a street address
Total $________
Sales Tax and Shipping Charges to be determined
Shipping Address Company:_________________________________________ Your name:________________________________________ Address:__________________________________________ City/State/Zip:_____________________________________ Phone:____________________________________________
Billing Address Company:_______________________________________ Your name:______________________________________ Address:________________________________________ City/State/Zip:___________________________________ Phone:__________________________________________
KVAL Inc. ● 825 Petaluma Blvd. So. ● Petaluma, CA 94952
Thanks for your order! We appreciate your business!
*If Credit Card is chosen, please complete the information below. ___ VISA ___ MasterCard ___ American Express
Payment Method ___ C.O.D (Collect on Delivery) ___ Established Account ( PO# ___________) ___Credit Card* Card Number:__________________________ Cardholder’s Name: __________________________________ Expiration Date:_______________ Card Validation Value (CVV): _________ (VISA/MasterCard - 3 digit/American Express - 4 digit)
Signature ______________________________ Date _____________
Published on 10/1/2014
Parts Department
Monday thru Thursday 6:00 a.m. to 4:00 p.m. Pacific Time
Friday
6:00 a.m. to 1:00 p.m.
Email: [email protected]
WWW.KVALINC.COM