ABOUT US SM ILE - IDL Dental Technologies LTD · procedure. IDL Dental Technologies Ltd strictly...

SMILE WITH US

+7(707)8166356

+7(775)7820687

+972546410302

WWW.IDL-IMPLANTS.COM

IDL IDENTAL TECHNOLOGIES LTD IS

SUSTAINABLY DEVELOPING COMPANY,

TAKING FIRM POSITIONS IN THE AREA OF

DEVELOPMENT, PRODUCTION AND

DISTRIBUTION OF IMPDISTRIBUTION OF IMPLANTS, PROSTHETIC

COMPONENTS AND VARIOUS STOMATOLOGIC

SURGICAL INSTRUMENTS.

ABOUT US01

PURPOSE OF OUR COMPANY IS ACHIEVEMENT

OF MAXIMUM POSSIBLE AND COMPLETE

INTEGRATION OF IDL IDENTAL TECHNOLOGIES

LTD PRODUCTS.

ININITIAL ADHESION AND LONG-TERM STABILITY

OF ADJACENT BONE DEPEND ON IMPLANTS’

MACRO-MECHANICAL CHARACTERISTICS,

THEIR DESIGN AND SURFACE STRUCTURE.

DIRECT IMPACT OF THESE CHARACTERISTICS

ON FAVORABLE OUTCOME IN MODERN

IMPLANTOLOGY WAS PROVED BY MANY

SUCCESSFUL CLINICAL RESUSUCCESSFUL CLINICAL RESULTS.

OUR MISSION02

TECHNOLOGIES LTD

IMPLANTS | TOOLSINSTRUMENTS

IDL DENTAL

CATALOGIDL DENTAL TECHNOLOGIES LTD

CONTENT

Content

About us

SLA Surface

Implant Progressive

Implant Prime

Implant Standard

Implant One PieceImplant One Piece

Straight titanium abutments

Angulated titanium abutments

Plastic abutments

Ball abutments

Healing caps

Transfers and Analogs

Multi Unit system Multi Unit system

Conical abutments

Conical healing abutments

Conical transfer copings, replica

Instruments

Surgical drills

Surgical sets

2

3 - 4

5 - 6

7 - 8

9 - 10

11 - 12

13 - 1413 - 14

15 - 18

19 - 22

23 - 24

25 - 26

27 - 28

29 -30

31 - 3431 - 34

35 - 36

37 - 38

39 - 40

41 - 44

45 - 46

47 - 50

2

ABOUT US

IDL DENTALTECHNOLOGIES LTD

IDL DENTAL TECHNOLOGIES LTD

is sustainably developing company, taking firm positions in the area of development, production and distribution of implants, prosthetic components and various stomatologic surgical instruments. Innovation system of dental implants IDL was developed on the basis of long-term experience and researches of world leaders in the area of implantology. Their osseointegration is achieved due to precision manufacturing process and multiple treatment of implants’ surface.

IDL DentalIDL Dental Technologies Ltd developed prosthesis system for internal hex implants, with conic joint, according to the principle “one prosthetic platform almost for all diameters”, it enables to select abutments, following the requirements of rebuilding procedure. IDL Dental Technologies Ltd strictly observes international standards on quality control and provides lifetime warranty on all kinds of implants, which is critical to mental equilibrium, evenness and professional confidence of each implant user and its patients.

PProducts of IDL Dental Technologies Ltd are officially authorized for promotional marketing in the USA. It corresponds to quality standard ISO 13485:2003 composed of medical products conformance evaluation, standard ISO 9001:2015, has EN ISO 13485:2012. Variety of our products provides opportunity of individual approach to treatment of the patient, considering dental plates’ anatomic features and ensuring excellent esthetics.

Many innovations in IDL system were offered by dental professionals with vast experience in the area of implantology. Clinical situations of complete rehabilitation on implants of IDL Dental Technologies Ltd were presented in many print publications.

IDL DentalIDL Dental Technologies Ltd performs various educational programmes, meeting the needs of experiences specialists – implant users and newcomers GP dentists. It participates in charitable acts. IDL Dental Technologies Ltd pays special attention to qualitative service and customers’ support within framework of the action “Quality of life for parents”.

3

Company IDL Dental Technologies Ltd provides possibility to professional dentists to complete online training for professional development.

Moreover, the company IDL Dental Technologies Ltd rearranged efficient plan for delivery and sale of its products to dealers all over the world.

Products of IDL conquer new countries from year to year.

The company has local sales and seThe company has local sales and service centers for the purpose of the best servicing.

Price, high quality and service are basic principles of our work, which allow professional dentists all over the world to develop with us, granting beautiful smile and another quality of life to the patients!

IMPLANT SYSTEM

Purpose of our company is achievement of maximum possible and complete integration of IDL Dental Technologies Ltd products and solution.

Initial engInitial engraftment and long-term stability of adjacent bone depend on implant’s macro-mechanical features, their design and surface structure.

Direct impact of these features on favorable outcome in modern implantology was proved by many successful clinical results.

Our system was dOur system was developed in such a manner that it acts as full replacement of natural teeth.

All system components operate consistently with the sole purpose – assurance of reliable clinical benefit and life-time functional of dental implant.

ADVANTAGES OF OUR IMPLANTS ARE:

− convenience during installation;− successful osseointegration, achieved by high level of cleaning from mechanical particles and level of sterilization;− powerful capabilities in prosthetics;− li− life-time preservation of application properties, and also predictable success under conditions of application of immediate functional loading

4

ZOOM X 200

ZOOM X 1500

ZOOM X 6000

IMPLANT SURFACE,ELECTRON MICROSCOPE IMAGE

Scientific investigations all over the world prove that qualitative implant service is a key to optimal osseointegration.

Characteristics of surface of implantable material have a special impact on adhesion and growth of tissues nearby implant service or directly at it. Implants of IDL Dental Technologies Ltd are manufactures of fine-grained titanium alloy of Ti-6AI-4V ELI brand.

This is high-stThis is high-strength, durable, biocompatible material. Years of researches and development of IDL Dental Technologies Ltd led to creation of perfect surface SLA Surface, securing the quickest osseointegration.

Implant suImplant surface SLA Surface is formed during complex process of sand blasting with large grain powder of aluminium dioxide with following acid leaching during which aluminium dioxide creates a porous surface.

Land-form, increasing implant surface area in three dimensions and ensuring large absorption of plasma protein at implant surface after its installation, is created due to this process.

StructuStructure and surface roughness of the implant in the result of sand blasting and acid etching improve implant osseointegration during first contact with pre-implant tissues.

Modern surface processing technologies, used during production of dental implants, provide the highest level of the quality.

Advantages of SLA SURFACE:

- Imp- Improved contact of implant with bone - Acceleration of osseointegration- High initial stability- qualitative osseointegral link - adhesion of peri-implant tissues

SLA SURFACE

5

DENTAL IMPALNTS

6

Spiral implant with internal hex Progressive provides easy controlled installation and excellent initial stability on difficult areas of bone tissue. Developed for surgical intervention with various types of bones.

Their geometry design includes double compression thread, three spinal canals, coming from apex, and micro-rings on implant collar. All implants of implant system IDL Dental Technologies Ltd were performed from the most popular alloy in the world for dental surgery and implantology 5Ti6Al-4V ELI, processed by free jet blast and acid-etched in accordance with the special standastandard for surfaces processing. Surface of implant SLA promotes quickest adhesion of existing and formation of new peri-implant bone, ensuring long-term, beautiful, functional and reliable result.

Advantages of implant Progressive makes it ideal for any implant procedures – from the simplest during restoration of one tooth to the most difficult during complete prosthetic oral rehabilitation.

Internal Hex

SLA surfaceprovides highosteintegrationStep for

collecting bone

Spiral, sharp and deep threads

IDL PROGRESSIVE IMPLANT


7

0 = 3.0NARROW

0 = 3.5STANDARD

0 = 3.75STANDARD

0 = 4.2STANDARD

0 = 5.0STANDARD

0 = 6.0STANDARD

10IPR 1030

11.5IPR 1130

13IPR 1330

8IPR 0835

10IPR 1035

11.5IPR 1135

13IPR 1335

16IPR 1635

6IPR 0637

8IPR 0837

10IPR 1037

11.5IPR 1137

13IPR 1337

16IPR 1637

6IPR 0642

8IPR 0842

10IPR 1042

11.5IPR 1142

13IPR 1342

16IPR 1642

8IPR 0850

10IPR 1050

11.5IPR 1150

13IPR 1350

8IPR 0860

10IPR 1060

11.5IPR 1160

13IPR 1360

L L L L L L

Drilling speed (RPM)

Drill diameter (mm)

900-1200

2

800-1000

2.5

500-700

2.8

400-700

3.2

400-600

3.65

400-600

4.2

300-500

4.8

300-500

5.2

DRILLING PROTOCOL

Color of cap indicates diameter of implant.

Color indicating thefinal drill colofinal drill color.

Outside tube Inside tube

Clip carrier

Cover screw

Implant

Components

PACKAGE CONTENT

8

Implant Prime is very popular due to advanced geometrical construction with new additional surface processing. Screw implant with internal hex Standard. Combination of conical platform of the body and variable design of thread with double step provide ergonomic advantages and makes installation less traumatizing for surrounding bone.

The implant is used on all types of a bone, under the two-stage surgical protocol. Implants of Prime will satisfy requirements as the beginning and skilled implantologists.

MicMicro-rings on implant collar expand implant contact area with bone in gingival margin of implant bed, follows by mitigation of osseous resorption of alveolar process Proved clinical fact: shape of conic implant Prime imitates shape of root of natural toothUniversal shape of the implant provides the best results by all therapeutic indications.

MAXIMUM ACCEPTABILITY:

Unique surface processing improves implant stability due to quickest adhesion in bone tissue. Horizontal macro-channels at the basis of the implant are intended for improvement of integration of soft tissues and stabilization of bone cortex.

Internal Hex Colical Platform


collecting bone

Spiral, double, sharp and deep threads

IDL PRIME IMPLANT


9

6IRP 0643

8IRP 0843

10IRP 1043

11.5IRP 1143

13IRP 1343

16IRP 1643

6IRP 0650

8IRP 0850

10IRP 1050

11.5IRP 1150

13IRP 1350

16IRP 1650

8INP 0835

10INP 1035

11.5INP 1135

13INP 1335

0 = 3.5NARROW

0 = 4.3REGULAR

0 = 5.0REGULAR

L L L L L L


Drill diameter (mm)

900-1200

2

800-1000

2.2

500-700

2.7

400-700

3.3

400-600

3.7

400-600

4

300-500

4.2

300-500

4.5

DRILLING PROTOCOL




Clip carrier

Cover screw

Implant

Components

PACKAGE CONTENT

10

Screw implant with internal hex Standard. Combination of conical shape of the body and variable design of thread with double step provide ergonomic advantages and makes installation less traumatizing for surrounding bone.

Standard is recommended for 1, 2 and 3 type of one, but can be applied in 4 subject to appropriate modification of surgical protocol.

Implant Standard is solution for all implant procedures, from restoration of one tooth till restoration of mouth cavity at complete edentulism.

Internal Hex


collecting bone

Standert sharp,deep not threads

IDL STANDARD IMPLANT


11

0 = 3.5STANDARD

0 = 3.75STANDARD

0 = 4.2STANDARD

0 = 5.0STANDARD

0 = 6.0STANDARD

8IST 0835

10IST 1035

11.5IST 1135

13IST 1335

16IST 1635

8IST 0837

10IST 1037

11.5IST 1137

13IST 1337

16IST 1637

8IST 0842

10IST 1042

11.5IST 1142

13IST 1342

16IST 1642

8IST 0850

10IST 1050

11.5IST 1150

13IST 1350

8IST 0860

10IST 1060

11.5IST 1160

13IST 1360

L L L L L L


Drill diameter (mm)

1200-1500

1.9

900-1200

2

800-1000

2.5

500-700

2.8

400-700

3.2

400-600

3.65

300-500

4.2

200-400

4.8

200-400

5.2

DRILLING PROTOCOL




Clip carrier

Cover screw

Implant

Components

PACKAGE CONTENT

12

One-part implants of IDL Dental Technologies Ltd are intended for surgical stage during restoration of denture defects.They are installed instead of missing teeth in the area of anterior teeth of low jaw in case of small horizontal component of the defect, restricted by adjacent teeth I order to support artificial dental prosthesis, crown works, bridges during restoration of masticatory function.

It is recommended to join dental protheses, based on two and more adjacent narrow implants with diameter 3 mm in the area of anterior teeth of low jaw.

NarNarrow implant is intended for conventional and direct implantation after tooth extraction.In case of one-step surgical implantation, implant can be loaded if functional load is proper and initial implant stability was achieved.

One-piece,narrow implantcombined with abatment

SLA surfaceprovides highosteintegration

Spiral, sharp and deep threads

IDL ONE PIECE IMPLANT


13

0 = 2.5ONE PIECE

0 = 3.0ONE PIECE

0 = 3.3ONE PIECE

10IOP 1025

11.5IOP 1125

13IOP 1325

16IOP 1625

10IOP 1030

11.5IOP 1130

13IOP 1330

16IOP 1630

10IOP 1033

11.5IOP 1133

13IOP 1333

16IOP 1633

L L L L


Drill diameter (mm)

900-1200

2

800-1000

2.3

500-7000

2.7

DRILLING PROTOCOL




Implant

Implant carrier

Components

PACKAGE CONTENT

14

STRAIGHT ABUTMENTS

FOR PROGRESSIVE PLATFORM

15

5mm 7mm 9mm 11mm 13mm 15mm

ISTA 15ISTA 13ISTA 11ISTA 9ISTA 7ISTA 5

Straight Abutments

9mm 11mm 13mm

ISTWA 13ISTWA 11ISTWA 9

Straight Abutments WIDE

7mm 9mm 11mm 13mm

ISTNA 11 ISTNA 13ISTNA 9ISTNA 7

Straight Abutments Narrow Platform

Straight titanium abutments with hex. There is a thread for screw inside the abutment.Straight abutments are available in three kinds: standard, narrow and wide. Wide ones are used in grinder teeth area. Narrow ones are used when space is limited, usually in frontal zone. Size tables for each kind of straight abutments are provided below. Abutments are completed with screws.

IMPORTANT! Recommended effort to tighten the abutment screw 30 newtons per centimeter!

STRAIGHT ABUTMENS


16

ABUTMENTS WITH SHOULDER

17

Used for solution of esthetic problems in vestibulum oris, follow the shape of gingival line. Used for creation of cemented constructions.

Anatomic shape of abutments allows reducing of time, spending on cutting of standard abutments. Height of abutment shoulder - 1, 2, 3, 4 mm

Abutments are completed with screws.

9mmShouder 1mm

9mmShouder 2mm

9mmShouder 3mm

9mmShouder 4mm

ISTSA 01 ISTSA 02 ISTSA 03 ISTSA 04

Straight Abutments With Shouder

9mmShouder 1mm

9mmShouder 2mm

9mmShouder 3mm

9mmShouder 4mm

ISTSWA 01 ISTSWA 02 ISTSWA 03 ISTSWA 04

Straight Abutments With Shouder Wide


ANATOMIC ABUTMENTSWITH SHOULDER


18

ANGULAR ABUTMENTS

19

9mm 11mm 13mm

ISTAA 1509 ISTAA 1511 ISTAA 1513

Angular Abutments 15°

Used when implant is installed at angle.Used for cement-retained restoration.Completed with screws.

9mm 11mm 13mm

ISTAA 2509 ISTAA 2511 ISTAA 2513

Angular Abutments 25°Used when implant is installed at big angle.Used for cement-retained restoration.Completed with screws.

9mm 9mm

ISTAA 3509 ISTAA 4509

Angular Abutments 35°, 45°

9mm 9mm

ISTSAA 9 ISTSAA 10

Angular Abutments Narrow 15°, 25°


ANGULAR ABUTMENTS


20

ANGULAR ABUTMENTS

WITH SHOLDER

21

9mmShouder 1mm

9mmShouder 2mm

9mmShouder 3mm

9mmShouder 4mm

ISTAA 15-1 ISTAA 15-2 ISTAA 15-3 ISTAA 15-4

Angular Abutments With Shoulder 15°

9mmShouder 1mm

9mmShouder 2mm

9mmShouder 3mm

9mmShouder 4mm

ISTAA 25-1 ISTAA 25-2 ISTAA 25-3 ISTAA 25-4

Angular Abutments With Shoulder 25°


Used for solution of esthetic problems in vestibulum oris, follow the shape of gingival line. Used for cement-retained restoration.Height of abutment shoulder - 1, 2, 3, 4 mmCompleted with screws.

ANATOMIC ANGULAR ABUTMENTS WITH SHOLDER


22

PLASTIC ABUTMENTS

T-BASE AND SCREWS

23

UCLA Plastic Abut.Hex

Plastic Abut.Non Hex

Plastic Abut.Narrow Hex

TitaniumBase

TitaniumScrew

TitaniumScrew Blue

TitaniumScrew Narrow

ISPAH 9 ISACH 9 ISSACH 9 ITB ISSA 083 ISSAB ISSSAIUCLA


Plastic abutment with hex

Plastic burnout abutments with internal hex Used for manufacturing of single constructions with autodrive fixation in chewable areas, in case of shortage of clinical weight for cement-retained restoration (at least 4 mm). Usage for manufacturing of individual abutments for further cement-retained restoration of esthetic restorations is possible.

Plastic abutment without hex

Plastic burnout abutments without hex. Used for manufacturing of bridge constructions with auPlastic burnout abutments without hex. Used for manufacturing of bridge constructions with autodrive fixation, in case of short-age of clinical weight for cement-retained restoration (at least 4 mm) and mismatch of axis of installed implants less than on 10°.

Plastic abutment with titanium base

Plastic burnout abutments with internal hex at titanium platform. Used for manufacturing of highly esthetic individual abutments from press-ceramics and zirconium dioxide, resulting in maximum accurate reconstruction of esthetics of cervical part of future construction.

Metal-free part is adhered to titanium platform, using glue. This construction allows transferring of load of fixing screw directly on titanium platform. It prevents them from strain and following destruction opposed to entirely zirconium abutments. Completed with screws.

Titanium base for zirconium and ceramics

Used as a basis for manufacturing of individual zirconium and ceramic two-component (hybrid) abutments, screw-retained dental prosthesis, using CAD/CAM technologies. Completed with screws.

PLASTIC ABUTMENTS T-BASE AND SCREWS


24

BALL ATTACHMENT

25


0.5mm 1mm 2mm 3mm 4mm 5mm 6mm

ISBA 0.5 ISBA 1 ISBA 2 ISBA 3 ISBA 4 ISBA 5 ISBA 6

Standard Ball Attachment


ISBAN 1 ISBAN 2 ISBAN 3 ISBAN 4 ISBAN 5 ISBAN 6

Ball Attachment Narrow Platform

ISMC ICN 003 ICN 001 ICN 002

Metal Cap Silicon Cap Silicon Cap Soft Silicon Cap Extra Soft

Ball Attachments Caps

Ball abutments are used for removable denture fixation.Delivered at height 0.5, 1, 2, 3, 4, 5, 6 mm. Selection depends on gingival height.These abutments are used with stainless steel cap with silicone cap. Silicone caps are available with various degree of hardness.

BALL ATTACHMENT


26

HEALING CAP

27


ISHC 1 ISHC 2 ISHC 3 ISHC 4 ISHC 5 ISHC 6

Healing Cap Standard Platform 4.5

2mm 3mm 4mm 5mm 6mm

ISHCW 2 ISHCW 3 ISHCW 4 ISHCW 5 ISHCW 6

Healing Cap Wide Platform 5.5


ISHCN 1 ISHCN 2 ISHCN 3 ISHCN 4 ISHCN 5 ISHCN 6

Healing Cap For Narrow Platform 3.0

Healing caps are intended for preparation of place for installation of dental prostheses. Offered healing caps: standard, narrow and wide.Sizes for each kind of healing caps are provided below.Height of healing caps is determined by height of mucous.

HEALING CAP


28

ANALOGS, TRANSFERS

29

Standart Analog 3.75 Wide Analog 5.0 Narrow Analog 3.0

ISIA 375 ISIA 500 ISISA 300

Analogs

TransferClip Tray13mm

TransferClip Tray9mm

TransferOpen Tray13mm

TransferClose Tray9mm

Transfer NarrowOpen Tray13mm

ISTC 13 ISTC 9 IST 13 IST 9 ISST 13

Transfers

Analogs is manufactured from stainless steel.Used as implant analog in dental laboratory.Allows making preparation for laboratory models.

Screw and clip transfer copings are manufactured from stainless steel.Delivered for close and open spoon for moulding teeth.

ANALOGS, TRANSFERS


30

STANDARD MULTI UNIT

31

Metal PositionHolder

Analog Transfer Open Closed PlasticTransfer Cap

Healing Cap ScrewPlastic SleeveAbutment

Titanium SleeveAbutment

IMMPH IMUA IMUTO IMUTC IMUPSA IMUTSA IMUHC IMUS

Multi Unit Tools

1mm 2mm 3mm 4mm 5mm

ISMU 1 ISMU 2 ISMU 3 ISMU 4 ISMU 5

Standard Multi Unit

Multi Unit is intended for portable prosthetics.

This system allows achieving of more effective result due to its low profile.

Moreover, useful life of the construction is increased in ten times in comparison with standard system Ball Attachment due to usage of PEEK materials in copings.

IFSBMU 1

IFSBMU 2

IFSBMU 3

IFSBMU 4

IFSBMU 5

STANDARD MULTI UNIT


32

ANGULATED MULTI UNIT

33

Metal PositionHolder

Analog Transfer Open Closed PlasticTransfer Cap

Healing Cap ScrewPlastic SleeveAbutment

Titanium SleeveAbutment

IMMPH IMUA IMUTO IMUTC IMUPSA IMUTSA IMUHC IMUS

Multi Unit Tools

1mm 2mm 3mm

IAMU 9-1 IAMU 9-2 IAMU 9-3

Angulated Multi Unit 9°

1mm 2mm 3mm



1mm 2mm 3mm



Multi Unit is intended for portable prosthetics at angle 9°, 17°, 30°.

This system allows achieving of more effective result due to its low profile.

MoMoreover, useful life of the construction is increased in ten times in comparison with standard system Ball Attachment due to usage of PEEK materials in copings.

IFABMU 9-1

IFABMU 9-2

IFABMU 9-3

IFABMU 17-1

IFABMU 17-2

IFABMU 17-3

IFABMU 30-1

IFABMU 30-2

IFABMU 30-3

ANGULATED MULTI UNIT


34

CONICAL PLATFORM ABUTMENTS

35

9mm RP 13mm RP 9mm NP 13mm NP Castable HEX RP Castable HEX NP

ISSAC-9 RP ISSAC-13 RP ISSAC-9 NP ISSAC-13 NP ISACHC-RP 4.3 ISACHC-NP 3.5

Standard Abutment Conical

1mm RP 2mm RP 3mm RP 1mm NP 2mm NP 3mm NP

ISSAC-1-RP ISSAC-2-RP ISSAC-3-RP ISSAC-1-NP ISSAC-2-NP ISSAC-3-NP

Straight Conical Abutment With Shoulder

Conical Abutment Angular RP 15° Conical Abutment Angular NP 15°

ISCAA-RP ISCAA-NP

Angulated Abutment Conical 15°

Straight titanium abutments with conical platform and internal hex.There is a thread for screw inside the abutments. Dimension charts are provided below for each kind of conical abutments. Abutments are completed with screws.

CONICAL ABUTMENTS


36

HEALINC CAP CONICAL

37

2mm RP 3mm RP 4mm RP 5mm RP

IHCC-2-RP IHCC-3-RP IHCC-4-RP IHCC-5-RP

Healing Cap Conical RP

2mm NP 3mm NP 4mm NP 5mm NP

IHCC-2-NP IHCC-3-NP IHCC-4-NP IHCC-5-NP

Healing Cap Conical NP

Healing caps are intended for preparation place for installation dental prostheses.Proposed healing abutments with conical platform ensure additional stability.Sizes are provided below.Height of healing abutments is determined by height of mucous.

HEALINC CAP CONICAL


38

TRANSFER, ANALOG, SCREWS

39

Transfer ConicalShort RP

Transfer ConicalLong RP

Transfer ConicalShort NP

Transfer ConicalLong NP

IITCS-RP IITCS-NP IITCL-NPIITCL-RP

Transfer Conical

Analog Conical RP Analog Conical NP

ISAC-RP ISAC-NP

Analog Conical

Abutments Screw Conical RP Abutments Screw Conical NP

ISCA-RP ISCA-NP

Screws for Conical Abutments

Analog is manufactured from stainless steel.Used as implant analoa in dental laboratory.Allows making preparation for laboratory models.Transfers are manufactured from stainless steel.Delivered for open spoon for moulding teeth.

CONICAL TRANSFER, ANALOG, SCREWS


40

IMPLANTOLOGY INSTRUMENTS

41

Ratchet Driver7mm

Ratchet Driver10mm

Ratchet Driver15mm

Ratchet One Piece Driver Key

Handle Driver7mm

Handle Driver10mm

Handle Driver15mm

IRDKN-7 IRDKN-10 IRDKN-15 IOPDK IHDK-7 IHDK-10 IHDK-15

Ratchet and Handle Drivers 1.25

Ratchet ImplantDriver 7mm



Ratchet ImplantDriver Conical RP

10mm

Ratchet ImplantDriver Conical RP

15mm

Ratchet ImplantDriver Conical NP

10mm

Ratchet ImplantDriver Conical NP

15mm

IRDK-7 IRDK-10 IRDK-15 IRDKRP-10 IRDKRP-15 IRDKNP-10 IRDKNP-15

Ratchet and Handle Drivers 2.42

Motor MountImplant22mm

Motor MountImplant 28mm

Motor MountAbutment22mm

Motor MountAbutment28mm

Motor MountConical RP22mm

Motor MountConical RP28mm

Motor MountConical NP22mm

Motor MountConical NP28mm

IMMI-22 IMMI-28 IMMA-22 IMMA-28 IMMCRP-22 IMMCRP-28 IMMCNP-22 IMMCNP-28

Motor Drivers

Instruments of the company IDL Dental Technologies Ltd are manufactured from surgical stainless steel and are heat treated, what essentially protects instrument against tear and wear.

INSTRUMENTS


42

OTHER TOOLS

43

Implant DriverIID

Drill ExtenderIDE

Depth ProbeIDP

Ratchet WrenchIRW

Standard RatchetISR

Trephines

3.0/4.0 mm IDT-34

4.0/5.0 mm IDT-45

5.0/6.0 mm IDT-56

Tissue Punch

3.5 mm ITP-35

4.0 mm ITP-40

4.5 mm ITP-45

5.0 mm ITP-50

Parallel Pin

16 mmIPP-16

10 mmIPP-10

OTHER TOOLS

TOOLS


44

IMPLANTOLOGY DRILLS

45

MD 1.9mm 2.0mm 2.5mm 2.8mm 3.2mm 3.65mm 4.2mm 4.5mm 4.8mm 5.2mm

IMD ISD-20 ISD-25 ISD-28 ISD-32 ISD-36 ISD-42 ISD-45 ISD-48 ISD-52

Standard Cyllindrical Drills External Irrigation

2.4mm1.8mm

2.7mm1.8mm

2.8mm1.8mm

3.2mm2.0mm

3.3mm2.0mm

3.7mm2.5mm

4.0mm2.7mm

4.5mm2.7mm

5.5mm3.1mm

ICD-24 ICD-27 ICD-28 ICD-32 ICD-33 ICD-37 ICD-40 ICD-45 ICD-55

Conical Cyllindrical Drills External Irrigation

3.8mm / 4.2mm 5.0mm / 6.0mm

ICSD-38 ICSD-50

Countersink Drills

Drills of the company IDL Dental Technologies Ltd are manufactured from medical stainless steel and are heat treated, what essentially protects them against tear and wear.Drills are delivered with external cooling.

DRILLS


laser marking

Color code

Drill dipping (mm)

46

SURGICAL KITS

47

SURGICAL KITS


1. Ratchet standard 2. Ratchet hex for implant 2.423. Ratchet hex for abutments 1.254. Motor mount for implants 2.425. Motor mount for abutments 1.256. Handle key for abutments 1.25 7.7. Drill extender 8. Marking drill 1.99. Drills with external irrigation: 2.0 2.8 3.2 3.65 4.2 5.210. Plastic box

STANDARD PLASTIC IMPLANTOLOGY SET PROPERTIES:

ISSPS

1. Ratchet torque2. Ratchet hex for implant 2.423. Ratchet hex for abutments 1.254. Motor mount for implants 2.425. Motor mount for abutments 1.256. Handle key for abutments short/long 1.25 7. 7. Parallel pin short/long8. Drill extender 9. Marking drill 1.910. Drills with external irrigation: 2.0 2.5 2.8 3.2 3.65 4.2 11. Metal box

STANDARD METAL IMPLANTOLOGY SET PROPERTIES:

ISSMS

48

SURGICAL KITS

49

SURGICAL KITS


1. Ratchet standard 2. Ratchet hex for implant 2.42 short/long3. Ratchet hex for abutments 1.25 short/long4. Motor mount for implants 2.42 short/long5. Motor mount for abutments 1.25 short/long6. Handle key for abutments 1.25 short/long 7.7. Parallel pin 2 pieces short, 2 pieces long8. Drill extender 9. Marking drill 1.910. Drills with external irrigation: 2.0 2.8 3.2 3.65 4.2 5.211. Countersink drills 3.8/4.2 5.0/6.0

FULL PLASTIC IMPLANTOLOGY SET PROPERTIES:

IFSPS

STOPPER DRILL EXTERNAL IRRIGATION KIT 30 PIECES:

0 2.0

0 2.8

0 3.2

0 3.65

0 4.0

0 4.5

6 8 10 11.5 13

6 8 10 11.5 13

6 8 10 11.5 13

6 8 10 11.5 13

6 8 10 11.5 13

6 8 10 11.5 13

ISSDK

50

CONTACT US+7(707)8166356

+7(775)7820687

+972546410302

[email protected]

www.idl-implants.com

IDL Dental Technologies Ltdisrael, ISO 9001: 2015ISO13485:2016EN ISO13485:2012

NON EST CENSUSSUPERSALUTIS CORPORIS

Date post:	04-Jun-2020
Category:	Documents
Upload:	others
View:	10 times
Download:	0 times

ABOUT US SM ILE - IDL Dental Technologies LTD · procedure. IDL Dental Technologies Ltd strictly...

Documents