Testing Equipment Manufacturer For Paint,Coating & Ink
BEVS Industrial Co.,Ltd. is the ISO approved laboratory testing instruments
manufacturer in the field of coating,paint,resin&ink.Our quality control and
testing instruments are made within the highest standards and combined with today’s most advanced technology.BEVS will be thebest partner with you and provide the whole solution of testing,inspection and laboratory instruments.
www.bevsinfo.com
E-mail:[email protected] Phone:86-20-29038636 Skype: bevsinfo
Introduction:
Wet Abrasion Scrub Tester
This machine is used to test the abrasion,
scrub and washability performance for many
kinds of materials, do the abrasion scrub
test in wet and dry condition; touch screen
control. It is widely used in water-based
coat ing f ie ld.
Application: Paint, coating, leather, wood, plastic,
printing materials and fiber etc.
Big LCD design, touch-screen operation
Operating Menu: Chinese or English
Test ing f lu id f low is contro l led by
per is ta l t ic pump
Technical Specification:
Scrub Rate: 37±1 cycles/min
Maximum Setting of Abrasion Times:
9999
Sample Thickness: 0-25 mm
Test Panel Thickness Range:0-25 mm
(Adjustable)
Standards:
ASTM D2486,D3450,D5213
DIN 53778
◆
◆
◆
◆
◆
◆
◆
◆
◆
BEVS 2805
Wet Abrasion Scrub Tester
Carriage assembly with pump, applied weight
500g , 2 brushes with natural bristle
BEVS 2805/1
Wet Abrasion Scrub Tester DIN 53778
Carriage assembly with pump, applied weight
250g, 2 brushes with natural bristle
BEVS 2805/2 (Standard Model)
Wet Abrasion Scrub Tester ASTM D2486
Carriage assembly with pump,applied load
454g, 2 Nylon brushers, 2 rubber pads with
12.7X0.25mm brass shim
BEVS 2805/3
Wet Abrasion Scrub Tester ASTM D3450
Carriage assembly with pump, applied weight
1500g, 2 sponges
Order Information:
◆
◆
◆
◆
325 ×
BEVS 2805/5
Fouling Resistance Tester GB/T9780-2013
Carriage assembly with pump, applied weight
absorbent cotton gauze
1500±10 g,
◆
Abrasion,Scrub & Washability