simulates rain to help predict the dura- bility of materials subjected to thermal shock. The QUV/spray can be set to produce short spray cycles for thermal shock or longer periods of spray to achieve mechanical erosion. Circle 429 on the reader service card Steam Evaporator RGF Environmental SystemsInc. West Palm Beach, Ha. The RGF Steam Draygon Evapora- tor will evaporate up to 99% of con- taminated wastewater, leaving only minimal residual waste to dispose of. It can process from 250 to 400 gallons of wastewater per day, operates automat- ically or by manual batch process, and incorporates a self-priming centrifugal processing pump. The Draygon incor- porates a high-flow exhaust fan and a serpentine heat exchanger to increase the evaporation rate, prevent unneces- sary loss of BTUs, and reduce fuel cost. Circle 430 on the reader service card Touch-Up Paint Pen Raabe Corp. Menomonee Falls, Wise. The Raabe Precision Color air-dry touch-up paint pen is ideal for repair- ing small finish imperfections such as nicks, scratches, and hook marks. The paint is custom made to match manu- facturer’s original coating and is used during production, installation, or sold as a retail item. The pen’s tip provides an accurate touch-up while the valve Circle 033 on reader information card system allows for easy one-hand appli- cation. The pens are available in both acrylic enamel and acrylic lacquer. Paint is also available in an aerosol spray can, brush-in-cap bottle, or tra- ditional liquid can. Circle 431 on the reader service card Abrasive Disks Rex-Cut Products Inc. Fall River, Mass. Rex-Cut Cotton Fiber Quick Change Disks feature multiple layers of rein- forced nonwoven cotton fiber impreg- nated with abrasive grains, pressed, bonded together, and then mounted on 3M Roloc style holders. Available in four different test kits containing 13 disks each, 2- or 3-in diameter, and Type R or S style holders, these disks run cool, constantly expose fresh abra- sives, are nonloading, and last up to 25 METAL FINISHING ?? SEPTEMBER 1996 91
Transcript
simulates rain to help predict the dura- bility of materials subjected to thermal shock. The QUV/spray can be set to produce short spray cycles for thermal shock or longer periods of spray to achieve mechanical erosion.
Circle 429 on the reader service card
Steam Evaporator RGF Environmental Systems Inc. West Palm Beach, Ha.
The RGF Steam Draygon Evapora- tor will evaporate up to 99% of con- taminated wastewater, leaving only minimal residual waste to dispose of. It can process from 250 to 400 gallons of wastewater per day, operates automat- ically or by manual batch process, and incorporates a self-priming centrifugal processing pump. The Draygon incor- porates a high-flow exhaust fan and a serpentine heat exchanger to increase the evaporation rate, prevent unneces- sary loss of BTUs, and reduce fuel cost.
Circle 430 on the reader service card
Touch-Up Paint Pen Raabe Corp. Menomonee Falls, Wise.
The Raabe Precision Color air-dry touch-up paint pen is ideal for repair- ing small finish imperfections such as nicks, scratches, and hook marks. The paint is custom made to match manu- facturer’s original coating and is used during production, installation, or sold as a retail item. The pen’s tip provides an accurate touch-up while the valve
Circle 033 on reader information card
system allows for easy one-hand appli- cation. The pens are available in both acrylic enamel and acrylic lacquer. Paint is also available in an aerosol spray can, brush-in-cap bottle, or tra- ditional liquid can.
Circle 431 on the reader service card
Abrasive Disks Rex-Cut Products Inc. Fall River, Mass.
Rex-Cut Cotton Fiber Quick Change Disks feature multiple layers of rein- forced nonwoven cotton fiber impreg- nated with abrasive grains, pressed, bonded together, and then mounted on 3M Roloc style holders. Available in four different test kits containing 13 disks each, 2- or 3-in diameter, and Type R or S style holders, these disks run cool, constantly expose fresh abra- sives, are nonloading, and last up to 25
METAL FINISHING ?? SEPTEMBER 1996 91
ReliabZlity, innovation and basic American ingenuity have made Kocour Thickness Testers the choice of progressive platers for over SO years. So, doesn’t it make sense to rely on either a Model 6000 with micro-processor based circuitry providing access to over 300 coatinti
substrate applications or the compact Series 10 Handheld unit available in both bask and enhanced models.
The Model 6000 features: ??Versatility - measures anything from a #2 screw to the largest coil. m Multi-layer coatings and ahoy layers ??Wire Capability ??Digital calibration, 98% Accuracy ??Easy to
Read Direct Readout ??STEP H Print Capability ??RS232C Interface to PC H Proven Kocour Quality, Reliability and Value
Model 6000
Kocour’s Thickness Testers
MEASUREUP Series IO has 12 models. Choose the one just right for your application. They are all lightweight, durable and feature easy-to-read LCD displays. And, all are designed II--:-- In and manufactured with Kocour’s total commitment to quality. Basic models measure non-magnetic coatings on steel, or on non-conductive coatings on non-ferrous metals. Anything from plating to paint, or anodizing, galvanizing and powder coatings. Enhanced models feature these additional capabilities: ??Printer Capability / RS232 Interface ??Multiple Calibration Memories and Batch Statistics ??instantaneously ??
Displays Full Measurement Statistics I E
Telephone: (312) 647-l 111 - FAX. (312) 647.3399 4600 South St. LOUIS Avenue. Chicaqo. Mnas 60632 U.S.A. !
Circle 044 on reader information card
times longer than conventional coated disks. The kits provide a selection of aluminum oxide abrasives in 24- to 120-grit types and flexible or medium bonds for providing different stock re- moval rates.
Circle 432 on the reader service card
Polyurethane Enamel Sherwin Williams Co. Cleveland
Polane S Plus polyurethane enamel is a low-VOC, low-gloss, two-compo- nent acrylic polyurethane providing high-volume solids and excellent exte- rior durability for metal and plastic finishing. The enamel is HAPs-com-
pliant and meets 2.8 VOC regulations while providing excellent gloss and color retention, as well as excellent hardness, abrasion, and chemical resis- tance for exterior applications. A high- solids coating, the enamel is fast dry- ing compared to other exterior polyurethanes and can be applied using conventional, airless, air-assisted air- less, HVLP, and electrostatic spray methods.
Circle 433 on the reader service card
Sealless Pump Setfi/co Ltd. Northbrook, 111.
A new EHM series of high-flow-rate vertical sealless CPVC pumps is avail- able from Serfilco. Models feature flow rates to 200 gpm at 80 ft TDH, or a 175ft maximum TDH with nonme- tallic solution contact, using 7.5 or 10 hp chemical duty motors. The pump is specifically designed for fume scrub- bers, circuit board wet process sys- tems, waste treatment, chemical trans- fer, and high flow/high TDH applications having shallow sumps. Shaft vapor seal provides fume con- tainment when the pump assembly is installed on a drop-in installation. Maximum service temperature is 180°F.
