3M Abrasive SystemsAbrasive Products, Tools and Accessories
Abrasiveswhere productivity
starts
2
Cut-Off Wheel Tools
user guide | Abrasive systems
User Guide
3M Abrasive solutions at your fingertips• The 3M Abrasive systems Catalogue has been designed to make it as easy as possible for you to find the details you
require about our range of world-class abrasive products.
• Products are grouped into nine colour-coded sections with each represented by the type of tool they are designed to
work with. The final two colour-coded sections represent the tools and accessories available from the 3M range.
• A second contents page has also been provided which lists all of the products by name, to make it quicker to find the
products that you might already know by name.
• To make product selection easier, we have provided information on each of the section divider pages that shows both
the application and the substrates that each product is primarily designed to work with.
• each product page provides a detailed breakdown of the available sizes and grades as well as recommendations on
which accessories or tools each product should be used with.
Product pages
11ANGLE GRINDERS | Abrasive Systems
Angle Grinders
3M™ Green-Corps™ Flexible Grinding Discs
3M™ Type WA Flexible Grinding Discs
3M™ Type A Flexible Grinding Discs
Applications:• Flexible grinding discs are ideal for working on thinner gauged metal applications where controlled
stock removal rates are required.• Post weld clean up of heavy weld splatter and residual slag.
Features:• Contains Cubitron™, the advanced Ceramic Aluminium Oxide mineral pioneered by 3M.• INOX and complies with AS1788 & EN12413.
Applications:• Suitable for use on stainless steel and mild steel.• Fast grinding perfromance and quailty fi nish for metal fabrication.
Features:• Contains premium white aluminium oxide mineral.• INOX and complies with AS1788 & EN12413.
Applications:• Post weld clean up of heavy weld splatter and residual slag.• Great choice for general purpose metal fabrication and lighter duty grinding applications.
Features:• Provides consistent performance and value.• Complies with AS1788 & EN12413.
Size (mm) Grade TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 2 x 16 P36G 27 15,300 (80m/s) 0336334
Back-up Platessupplied in
the boxAngle Grinder
100 x 2 x 16 P46G 27 15,300 (80m/s) 0336346
100 x 2 x 16 P60G 27 15,300 (80m/s) AC010583642
100 x 2 x 16 P80G 27 15,300 (80m/s) 0336360
115 x 3 x 22 P36G 27 13,300 (80m/s) XC002031349
115 x 3 x 22 P46G 27 13,300 (80m/s) 0386979
115 x 3 x 22 P80G 27 13,300 (80m/s) 0386995
125 x 3 x 22 P36G 27 12,250 (80m/s) 0387001
125 x 3 x 22 P46G 27 12,250 (80m/s) 0387019
125 x 3 x 22 P60G 27 12,250 (80m/s) XC002032214
125 x 3 x 22 P80G 27 12,250 (80m/s) XC002032222
180 x 3.7 x 22 P36G 27 8,500 (80m/s) 0387043
180 x 3.7 x 22 P46G 27 8,500 (80m/s) XC002032248
180 x 3.7 x 22 P60G 27 8,500 (80m/s) XC002032255
Size (mm) Grade TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 2 x 16 P36G 27 15,300 (80m/s) XB002000519
Back-up Platessupplied in
the boxAngle Grinder
100 x 2 x 16 P46G 27 15,300 (80m/s) XB002005527
100 x 2 x 16 P60G 27 15,300 (80m/s) XB002005535
125 x 3 x 22 P36G 27 12,250 (80m/s) XB002005592
125 x 3 x 22 P46G 27 12,250 (80m/s) XB002005600
Size (mm) Grade TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 2 x 16 P46G 27 15,300 (80m/s) XC002057484 Back-up Platessupplied in
the boxAngle Grinder
125 x 3 x 22 P36G 27 12,250 (80m/s) XB002005717
125 x 3 x 22 P46G 27 12,250 (80m/s) XB002005725
sections are colour-coded and tabbed for easy look-up
Product name
Typical applications
Product benefits
Product selectionrecommended or OptionalAccessories
recommended or Optional Tools
Section divider pages
9ANGLE GRINDERS | Abrasive Systems
Application Substrate
3M™ Grinding Discs Grin
ding
Ligh
t Grin
ding
Blen
ding
Debu
rrin
g
Fini
shin
g
Clea
ning
Coat
ing
Rem
oval
Stai
nles
s St
eel
Alum
iniu
m
Carb
on S
teel
Cast
Iron
Tita
nium
Nick
el A
lloy
Non-
Ferr
ous
(Bra
ss/B
ronz
e)
Best 3M™ Green-Corps™ Grinding Discs • • • • • •
Better 3M™ Type WA Grinding Discs • • • •
Good 3M™ Type A Grinding Discs • • •
3M™ Fibre Discs
Best 3M™ Cubitron™ II Fibre Discs 987C • • • • • • • • •
Best 3M™ Cubitron™ II Fibre Discs 982C • • • • • • •
Better 3M™ Fibre Discs 581C • • • • •
Scotch-Brite™ Discs
Best Scotch-Brite™ Light Grinding and Blending Discs • • • • • • •
Better Scotch-Brite™ Surface Conditioning Discs • • • • • • • • • •
Best Scotch-Brite™ Clean and Strip (Depressed Centre) • • • • •
Better Scotch-Brite™ Coating Removal Discs • • • • •
3M™ Fibre Disc Back Up Pads
3M™ Centre-Pin Contact Disc Pads
• Ribbed grinding face on the back-up pads improves the cut rate of the fi bre discs and allows the operator to use less pressure on the work piece.
• Retaining nuts to suit either metric or imperial threaded tool systems are supplied with every back up pad.• Each pad is packaged individually and ready for retail stores.
• Centre-Pin Attachment System contributes to a reduction in tool vibration by centring, securing and maintaining the disc in the correct position on the back-up pad.
• Strong T-Hooks on the face of the pad will securely hold surface conditioning as well as light grinding and blending discs, while the centre-pin will signifi cantly reduce the risk of disc “fl y-off” from the back-up pad.
• The centre-pin is designed not to interfere with the work surface, allowing the disc to be used in the same method as it is now.
3M™ & Scotch-Brite™
Discs for Angle Grinders
Product list with good, better, best recommendations
Additional product information and recommendations
sections are colour-coded and tabbed for easy lookup
Product selection chart for applications
Product selection chart for substrates
3
Contents
CONTeNTs | Abrasive systems
Cut-Off Wheel Tools 7
Angle grinders 11
sanders 17
Hand sanding 27
Belt Machines 33
die grinders 40
Fillet Weld grinders 45
Bench Motors 46
small disc sanders 50
Buffing Machines 55
3M™ Air Tools 57
3M™ Accessories 63
Abrasive solutions suitable for . . .
4 PrOduCT CONTeNTs | Abrasive systems
Product contents:
Cut-Off Wheel Tools 3M™ Thin Cut-Off Wheels 7 3M™ green Corps™ Cut-Off Wheels 7
Angle Grinders 3M™ green-Corps™ rigid grinding discs 12 3M™ Type WA rigid grinding discs 12 3M™ green-Corps™ Flexible grinding discs 13 3M™ Type WA Flexible grinding discs 13 3M™ Cubitron™ ii Fibre disc 987C 14 3M™ Cubitron™ ii Fibre disc 982C 14 3M™ Fibre disc 581C 15 scotch-Brite™ Clean and strip discs (depressed Centre) 15 scotch-Brite™ Coating removal discs (Hook and Loop) 15 scotch-Brite™ Light grinding and Blending disc 16 scotch-Brite™ surface Conditioning disc 16
Sanders 3M™ Hookit™ Clean sand Paper disc 236u 18 3M™ Hookit™ Purple Paper disc - Clean sand 19 3M™ Hookit™ green Paper disc (With dust extraction) 19 3M™ Hookit™ gold Paper disc (With dust extraction) 20 3M™ Hookit™ Paper disc (With dust extraction) 20 3M™ Hookit™ Microfinishing Film discs (With dust extraction) 21 3M™ Hookit™ Finishing Film discs (With dust extraction) 21 3M™ Hookit™ Finishing Film discs (With dust extraction) 21 3M™ Hookit™ Finishing Film discs (No dust extraction) 22 3M™ Hookit™ green Paper disc (No dust extraction) 22 3M™ Hookit™ gold Paper disc (No dust extraction) 22 scotch-Brite™ Hookit™ random Orbital discs 23 scotch-Brite™ Clean and Finish disc 23 3M™ stikit™ gold Film discs (No dust extraction) 23 3M™ stikit™ green Paper discs (No dust extraction) 24 3M™ stikit™ Paper discs (No dust extraction) 24 3M™ Hookit™ Purple Clean sand sheet rolls 24 3M™ Hookit™ gold Paper sheets 25 3M™ gold Paper roll 25 3M™ Hookit™ gold Paper roll 26
Hand Sanding 3M™ gold Paper sheets 28 3M™ Wetordry™ Paper sheets 28 3M™ Wetordry™ Paper sheets 28 3M™ Flexible Abrasives Hookit™ sheet 29 3M™ gold soft Hand rolls 29 3M™ sanding Block 29 3M™ Hi-Flex sanding sponges 29 3M™ soft Back sanding sponges 30 scotch-Brite™ Multi-Flex Abrasive sheet rolls 30 scotch-Brite™ Clean and Finish rolls 30 scotch-Brite™ Cut and Polish rolls 30 scotch-Brite™ durable Flex Hand Pads 31 scotch-Brite™ Hand Pads 31
Belt Machines 3M™ Cubitron™ ii Cloth Belts 984F 34 3M™ Cloth Belts 577F 35 3M™ Cloth Belts 351A 36 3M™ Trizact™ Cloth Belts 237AA 37 scotch-Brite™ durable Flex Belts 38 scotch-Brite™ Belts 39
Die Grinders scotch-Brite™ Clean and strip discs 41 scotch-Brite™ Clean and strip discs (shaft Mounted) 41 scotch-Brite™ roloc™+ Clean and strip disc 41 scotch-Brite™ roloc™+ Combination Flap Brush 42 scotch-Brite™ roloc™+ Cut and Polish Flap Brush 42 scotch-Brite™ roloc™+ Clean and Finish Flap Brush 42 scotch-Brite™ roloc™+ Cut and Polish Mop 43 scotch-Brite™ roloc™+ Cut and Polish unitised Wheel 43 scotch-Brite™ rapid Cut unitized Wheel 43 scotch-Brite™ eXL unitised Wheel 44
5
Cut-Off Wheel Tools
PrOduCT CONTeNTs | Abrasive systems
Product Contents
scotch-Brite™ radial Bristle discs 44 scotch-Brite™ radial Bristle Brush 44
Fillet Weld Grinders scotch-Brite™ rapid Cut unitized Wheel 45 scotch-Brite™ eXL unitized Wheel 45
Bench Motors scotch-Brite™ eXL deburring Wheel 47 scotch-Brite™ Light deburring Wheel 47 scotch-Brite™ Metal Finishing Wheel 47 scotch-Brite™ Multi-Finishing Wheel 48 scotch-Brite™ Multi-Purpose unitised Wheel 48 scotch-Brite™ radial Bristle Brush 48 scotch-Brite™ Clean and strip discs 49 scotch-Brite™ High strength disc 49 scotch-Brite™ High strength Mop 49
Small Disc Sanders 3M™ Cubitron™ ii roloc™ durable edge disc 984F 51 3M™ roloc™ Fibre disc 983C 51 3M™ roloc™ disc 777F 51 3M™ roloc™ disc 361F 52 scotch-Brite™ roloc™ Light grinding and Blending disc 52 scotch-Brite™ roloc™ se surface Conditioning disc 52 scotch-Brite™ roloc™ surface Conditioning disc 53 scotch-Brite™ roloc™ rapid Cut unitized Wheel 53 scotch-Brite™ roloc™ eXL unitised Wheel 53 scotch-Brite™ roloc™ Clean and strip XT disc 54 scotch-Brite™ roloc™ Coating removal disc 54 scotch-Brite™ roloc™ Bristle disc 54
Buffing Machines 3M™ Perfect-it™ Compounds 56 3M™ Perfect-it™ Polishes 56 3M™ Perfect-it™ Clean and shine 56
3M™ Air Tools 3M™ elite series Air-Powered random Orbital sanders – Non Vacuum systems 59 3M™ elite series Air-Powered random Orbital sanders – Central Vacuum systems 59 3M™ elite series Air-Powered random Orbital sanders – self generating Vacuum 59 3M™ Orbital sander 60 3M™ Air Powered disc sanders 60 3M™ Air Powered die grinders 60 3M™ Air Powered Cut-Off Wheel Tools 60 3M™ Air-Powered File Belt sanders 61 3M™ Air Tool Lubricant 62 3M™ Filtrete™ Filter Bag 62 3M™ Filter Bag Adaptor 62
3M™ Accessories 3M™ High Pressure Fibre disc Back up Pads 64 3M™ Fibre disc Back up Pads & extended retaining Nut 64 3M™ Hook & Loop disc Pads and Holders 64 3M™ Hookit™ disc Pads and Holders for Clean sand & dust extraction systems 65 3M™ Hookit™ disc Pads and Holders for Non dust extraction systems 65 3M™ Hookit™ interface Pads for Clean sand & dust extraction systems 65 3M™ stikit™ disc Pads and Holders 66 3M™ Block & sponge Pad 66 3M™ Hookit™ Vacuum Hand Blocks 66 3M™ Hookit™ Hand Blocks 66 3M™ Hookit™ Fairing Boards 67 3M™ Hand Blocks and Pads 67 3M™ roloc™+ Holders 67 3M™ unitised Wheel Mandrels 67 3M™ Mandrels 68 3M™ roloc™ Ts Mandrel 68 3M™ Wheel Flanges & Adaptors 68 3M™ roloc™ disc Pads and Holders 68 3M™ Perfect-it™ Hookit™ Compounding & Polishing Pads 69 3M™ Hookit™ Back up Pads for Compounding & Polishing 69 3M™ superbuff™ Pads 69
6
How can 3M help your business . . .
A Long History in Abrasives3M was founded in 1902 to mine a mineral deposit for abrasive grinding wheels. in 1921, it revolutionised the sandpaper
industry by launching the world’s first waterproof sandpaper. For over 100 years, 3M has been a proven leader,
providing advanced technology and innovative solutions for increased productivity, enhanced efficiency and improved
manufacturing processes, while never compromising quality or safety.
Abrasives Specialist Sales Team3M’s team of sales specialists are dedicated to offering our customers superior value and quality across our range of
abrasive solutions. Located throughout Australia, this team can arrange for and conduct site surveys, in which their focus
is on assessing and optimising your processes. Contact 3M on 136 136 to arrange a visit from a 3M sales specialist.
Product Demonstrationsunderstanding that nothing is as effective as a live demonstration, 3M sales specialists are equipped to be able
to provide on-site demonstrations than can improve your company’s processes and make your job easier. Located
throughout Australia, the team can also work with you to conduct site surveys, in which their focus is on assessing areas
to optimise your processes. Contact 3M on 136 136 to arrange a visit from a 3M sales specialist.
Commitmentto Innovation
& Quality3M VALue | Abrasive systems
3M Value
7Cut-Off Wheel tOOlS | Abrasive Systems
3M™ Wheels forCut-Off Tools & Grinders
3M™ Cut-Off Wheel ToolsCompact design and built-in safety features make these the tools of choice! designed to easily handle cutting through everything from standard rebar to oversized bolts, you can count on the performance and dependability of the new line of 3M™ Cut-Off Wheel Tools.
Straight Shaft Cut-Off Wheel ToolsLightweight tool for 75mm and 100mm cut-off wheels
• 1 HP• 360 degree rear directional exhaust• 3M™ gripping material
More details on the tools can be found in the 3M™ Air Tools section starting on page 56 of this catalouge
3M™ Green Corps™ Cut-Off Wheels
3M™ Thin Cut-Off Wheels
Applications:• Top performance on most materials including fibreglass, stainless steel, mild steel and aerospace alloys.• Cutting sheet metal, frames, rails, bars, clamps and rusted bolts.
Features:• Long lasting 3M™ Cubitron™ Abrasive Grain.
Applications:• Suitable for use on stainless steel and mild steel.• High cut rates and long life on many materials.
Features:• Thin wheels help to reduce heat generation and material waste.• INOX and complies with AS1788 & EN12413.
Size (mm)Part
NumberType
Max Operating Speed (rpm)
Order ID Recommended Tools
75 x 0.8 x 9.5 01989 41 28,000 60980028801 Cut-Off Tool PN202336044017941875 x 1.6 x 9.5 01990 41 26,250 60980028819
100 x 0.8 x 9.5 01994 41 26.250 60980030427Cut-Off Tool PN20234
60440179426
Size (mm) Grade TypeMax Operating Speed (rpm)
Order ID Recommended Tools
100 x 1 x 16 AT60T-BF 41 15,300 (80m/s) XC002062609
Angle Grinder115 x 1 x 22 AT60T-BF 41 13,300 (80m/s) XC002062617
125 x 1 x 22 AT60T-BF 41 12,250 (80m/s) XC002062625
180 x 1.6 x 22 AT60T-BF 41 8,500 (80m/s) XC002062641
8 3M™ TeCHNOLOgy | Abrasive systems
3M Precision Grindingand Finishing solutions
Now, 3M offers you today’s most innovative portfolio of advanced abrasive technologies to help you achieve the next level of manufacturing precision and productivity.3M brings you a broad range of solutions designed to meet today’s tough processing challenges. From grinding-to-dimension all the way to superfinishing, 3M has the tools you need to achieve stringent geometry tolerances and finish specs, part after part. Together with the former Winterthur Technologies group, which is now part of 3M and one of the world’s top manufacturers of bonded abrasives for industrial use, we provide the automotive, aerospace, oil and gas, cutting tool, primary metal, glass and other industries with innovative abrasive solutions.
3M, Winterthur, Wendt and slipNaxos are brands recognized and trusted worldwide for reliable quality and precision abrasive products used in industries that manufacture precision parts and components for automotive engines and transmissions, oil and gas drilling, cutting tools, aircraft and land based turbines and many others.
Brand HistoriesWinterthur: The Winterthur brand has a long tradition of vitrified precision
grinding wheels. These products are designed and manufactured to
incorporate technology reflective of the most recent machine and grinding
developments in the industry.
Wendt: The Wendt brand provides leading superabrasive wheels for tool and
cutter grinding of hard materials such as PCd, ceramics and tungsten carbide.
SlipNaxos: slipNaxos products include hot-pressed grinding wheels for the steel
industry for grinding slabs and billets. The product range also consists
of roll grinding and centerless grinding wheels for the steel industry as well
as large diameter precision grinding wheels for cam and crankshaft grinding and
superabrasive wheels for cutting tool applications.
3M Abrasive systems divisionFor more than 100 years, 3M has been a world leader in developing advanced
abrasives. Our technologies have helped customers in virtually every industrial
sector improve productivity, cut cost and achieve the consistent high quality
finishes they need to compete in a world marketplace.
93M™ TeCHNOLOgy | Abrasive systems
3M™ Technology
3M Precision grinding solutions
Rotary Dressers Stationary Dressers Dressing Equipment
DreSSing
Vitrified CBN Metal Bond for Glass Brazed CBN and DiamondElectroplated CBN and Diamond
Vitrified DiamondResin, Poly and Hybrid
SuperAbrASive WheelS
Vitrified Bond
ConventionAl WheelS
Gear Grinding: Threaded, Bevel, Single Rib Resin Bond Large Diameter Cut-Off
Flex Diamond Compounds
FlexibleS
Microfinishing Film
3M Product, Application and Market Matrix
Supe
rAbr
ASiv
e W
heel
S
Resin
, Pol
y an
d Hy
brid
Vitri
fied
CBN
Vitri
fied
Diam
ond
Elec
tropl
ated
CBN
and
Dia
mon
d
Met
al B
ond
Braz
ed C
BN a
nd D
iam
ond
Con
ven
tion
Al W
heel
S
Vitri
fied
Bond
Resin
Bon
d
Larg
e Di
amet
er C
ut-O
ff
Flex
ible
S
Flex
Dia
mon
d
Com
poun
ds
Mic
rofin
ishi
ng F
ilm
DreS
Sin
g
Rota
ry D
ress
ers
Stat
iona
ry D
ress
ers
Dres
sing
Equi
pmen
t
Cutting tool AppliCAtionS
Indexable Insert Grinding n n n n n
Round Tools n n n
priMAry MAteriAlS
Roll Grinding and Superfinishing n n n n n n n
Slab and Plate Conditioning n n
Cut-Off n n
inveStMent CASting
Turbine Blades/Vanes n n n n n n n n n
Orthopedic Implants n n n n n n n n
poWertrAin beAringS & geArS
Gear Grinding n n n n n n
Bearing Grinding n n n n n n n
Powertrain Grinding and Finishing n n n n n n n n
oil & gAS
PCD Cutters and Drilling Bits n n n
Thermal Spray – Wear Surfaces n n n n n
3M™ TeCHNOLOgy | Abrasive systems
3M™ Technology
Engineered Perfection.
epic Performance.
3M™ Cubitron™ ii
Forget Everything You Know About GrindingiMAgiNe a new abrasive technology that rewrites the rules
of grinding. generating less heat, faster processing time,
fewer stress failures and less burnishing. 3M long known for
innovation, has found a way to precisely shape abrasive grains.
introducing the breakthrough 3M precision shaped grain
technology behind our Cubitron™ ii belts and discs.
• Up to 4X Longer Life • Up to 30% Faster Cut • Grinds Coolerif you haven’t tried Cubitron™ ii, you are missing a real game changer!
Plows through metal
ConventionalCeramic Grain 3M™ Precision Shaped Grain
Slices through metal
For more information contact 3M on 136 136 or visit www.3Mcubitron2.com/au
This technology is used in:
3M™ Cubitron™ ii Fibre disc 987C Page 14
3M™ Cubitron™ ii Fibre disc 982C Page 14
3M™ Cubitron™ ii Cloth Belts 984F Page 34
3M™ Cubitron™ ii roloc™ durable edge disc 984F Page 51
11ANGLE GRINDERS | Abrasive Systems
Angle Grinders
Application Substrate
3M™ Grinding Discs Grin
ding
Ligh
t Grin
ding
Blen
ding
Debu
rrin
g
Fini
shin
g
Clea
ning
Coat
ing
Rem
oval
Stai
nles
s St
eel
Alum
iniu
m
Carb
on S
teel
Cast
Iron
Tita
nium
Nick
el A
lloy
Non-
Ferr
ous
(Bra
ss/B
ronz
e)
Best 3M™ Green-Corps™ Grinding Discs • • • • • •
Better 3M™ Type WA Grinding Discs • • • •
3M™ Fibre Discs
Best 3M™ Cubitron™ II Fibre Discs 987C • • • • • • • • • •
Best 3M™ Cubitron™ II Fibre Discs 982C • • • • • • •
Better 3M™ Fibre Discs 581C • • • • •
Scotch-Brite™ Discs
Best Scotch-Brite™ Light Grinding and Blending Discs • • • • • • •
Better Scotch-Brite™ Surface Conditioning Discs • • • • • • • • • •
Best Scotch-Brite™ Clean and Strip (Depressed Centre) • • • • •
Better Scotch-Brite™ Coating Removal Discs • • • • •
3M™ Fibre Disc Back Up Pads
3M™ Centre-Pin Contact Disc Pads
• ribbed grinding face on the back-up pads improves the cut rate of the fibre discs and allows the operator to use less pressure on the work piece.
• retaining nuts to suit either metric or imperial threaded tool systems are supplied with every back up pad.• each pad is packaged individually and ready for retail stores.
• Centre-Pin Attachment system contributes to a reduction in tool vibration by centring, securing and maintaining the disc in the correct position on the back-up pad.
• strong T-Hooks on the face of the pad will securely hold surface conditioning as well as light grinding and blending discs, while the centre-pin will significantly reduce the risk of disc “fly-off” from the back-up pad.
• The centre-pin is designed not to interfere with the work surface, allowing the disc to be used in the same method as it is now.
3M™ & Scotch-Brite™
Discs for Angle Grinders
12 ANGLE GRINDERS | Abrasive Systems
Angle Grinders
3M™ Green-Corps™ Rigid Grinding Discs
3M™ Type WA Rigid Grinding Discs
Applications:• Suitable for use on stainless steel and mild steel.• Used for weld leveling and heavy duty grinding applications.
Features:• Contains Cubitron™, the advanced Ceramic Aluminium Oxide mineral pioneered by 3M.• INOX and complies with AS1788 & EN12413.
Applications:• Suitable for use on stainless steel and mild steel.• Used for lighter duty grinding and blending work.
Features:• Contains premium white aluminium oxide mineral.• INOX and complies with AS1788 & EN12413.
Size (mm) Grade TypeMax Operating Speed (rpm)
Order ID Recommended Tools
100 x 6 x 16 P24G 27 15,300 (80m/s) XC002057088
Angle Grinder
115 x 6 x 22 P24G 27 13,300 (80m/s) XC002058748
125 x 6 x 22 P24G 27 12,250 (80m/s) XC002058755
180 x 6 x 22 P24G 27 8,500 (80m/s) XC002057393
230 x 6 x 22 P24G 27 6,650 (80m/s) XC002058714
Size (mm) Grade TypeMax Operating Speed (rpm)
Order ID Recommended Tools
100 x 6 x 16 P24G 27 15,300 (80m/s) XC002057435
Angle Grinder115 x 6 x 22 P24G 27 13,300 (80m/s) XC002058763
125 x 6 x 22 P24G 27 12,250 (80m/s) XC002058771
13ANGLE GRINDERS | Abrasive Systems
Angle Grinders
3M™ Green-Corps™ Flexible Grinding DiscsApplications:• Flexible grinding discs are ideal for working on thinner gauged metal applications where controlled
stock removal rates are required.• Post weld clean up of heavy weld splatter and residual slag.
Features:• Contains Cubitron™, the advanced Ceramic Aluminium Oxide mineral pioneered by 3M.• INOX and complies with AS1788 & EN12413.
Size (mm) Grade TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 2 x 16 P36G 27 15,300 (80m/s) XC002509476
Back-up Platessupplied in
the boxAngle Grinder
100 x 2 x 16 P46G 27 15,300 (80m/s) XC002509484
100 x 2 x 16 P60G 27 15,300 (80m/s) AC010583642
100 x 2 x 16 P80G 27 15,300 (80m/s) XC002509500
115 x 3 x 22 P36G 27 13,300 (80m/s) XC002031349
115 x 3 x 22 P46G 27 13,300 (80m/s) XC002031356
115 x 3 x 22 P80G 27 13,300 (80m/s) XC002037304
125 x 3 x 22 P36G 27 12,250 (80m/s) XC002032198
125 x 3 x 22 P46G 27 12,250 (80m/s) XC002032206
125 x 3 x 22 P60G 27 12,250 (80m/s) XC002032214
125 x 3 x 22 P80G 27 12,250 (80m/s) XC002032222
180 x 3.7 x 22 P36G 27 8,500 (80m/s) XC002032230
180 x 3.7 x 22 P46G 27 8,500 (80m/s) XC002032248
180 x 3.7 x 22 P60G 27 8,500 (80m/s) XC002032255
3M™ Type WA Flexible Grinding DiscsApplications:• Suitable for use on stainless steel and mild steel.• Fast grinding perfromance and quailty finish for metal fabrication.
Features:• Contains premium white aluminium oxide mineral.• INOX and complies with AS1788 & EN12413.
Size (mm) Grade TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 2 x 16 P36G 27 15,300 (80m/s) XB002000519Back-up Plates
supplied in the box
Angle Grinder100 x 2 x 16 P46G 27 15,300 (80m/s) XB002005527
100 x 2 x 16 P60G 27 15,300 (80m/s) XB002005535
125 x 3 x 22 P36G 27 12,250 (80m/s) XB002005592
14 ANGLE GRINDERS | Abrasive Systems
Angle Grinders
3M™ Cubitron™ II Fibre Disc 982CApplications:• Designed for best performance on mild steel.• Prep work, bevelling or weld grinding.
Features:• Cuts faster, grinds cooler and lasts longer.• 3M’s New precision shaped premium ceramic mineral.
Size (mm) GradeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 16 36+ 13,300 60440230021Back-up Pad PN07312
XC003410104
Angle Grinder
100 x 16 60+ 13,300 60440230039
100 x 16 80+ 13,300 60440230047
115 x 22 36+ 13,300 60440229288Back-up Pad PN09583
XC003410039115 x 22 60+ 13,300 60440229353
115 x 22 80+ 13,300 60440229395
125 x 22 36+ 12,000 60440229270Back-up Pad PN09584
XC003410047125 x 22 60+ 12,000 60440229361
125 x 22 80+ 12,000 60440229403
180 x 22 36+ 8,600 60440229262Back-up Pad PN09921
DC272921404180 x 22 60+ 8,600 60440229379
180 x 22 80+ 8,600 60440229411
3M™ Cubitron™ II Fibre Disc 987CApplications:• Designed for best performance on stainless steel.• Prep work, bevelling or weld grinding.
Features:• Cuts faster, grinds cooler and lasts longer.• 3M’s New precision shaped premium ceramic mineral.
Size (mm) GradeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 16 36+ 13,300 60440230054Back-up Pad PN07312
XC003410104
Angle Grinder
100 x 16 60+ 13,300 60440230062
100 x 16 80+ 13,300 60440230070
115 x 22 36+ 13,300 60440229312Back-up Pad PN09583
XC003410039115 x 22 60+ 13,300 60440229577
115 x 22 80+ 13,300 60440229619
125 x 22 36+ 12,000 60440229304Back-up Pad PN09584
XC003410047125 x 22 60+ 12,000 60440229585
125 x 22 80+ 12,000 60440229627
180 x 22 36+ 8,600 60440229296Back-up Pad PN09921
DC272921404180 x 22 60+ 8,600 60440229593
180 x 22 80+ 8,600 60440229635
Have you taken the Cubitron™ II Challenge?
Nothing will:• Cut Faster• Last Longer• run Cooler
15ANGLE GRINDERS | Abrasive Systems
Angle Grinders
Scotch-Brite™ Clean and Strip Discs (depressed Centre) Applications:• Aggressive, open-web disc for cleaning welds, removing rust, paint and other coatings.
Features:• Load resistant.• Smear resistant.
Size (mm) Grade Colour TypeMax Operating Speed (rpm)
Order ID Recommended Tools
100 x 16 S XCS Purple Rigid 12,000 XC000777315
Angle Grinder
115 x 22 S XCS Blue Flexible 11,000 FN510079422
115 x 22 S XCS Purple Rigid 12,000 XC000777323
125 x 22 S XCS Purple Rigid 12,000 XC000777331
180 x 22 S XCS Purple Rigid 8,500 XC000777349
Scotch-Brite™ Coating Removal Discs (Hook and Loop) Applications:• Aggressive, open-web disc for cleaning welds, removing rust and paint.
Features:• Contains a backing that mounts to hook & loop disc pads.• Smear resistant.
Size (mm) Grade Colour TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
115 S XCS Black Flexible 12,000 61500120086Disc Pad PN9145
61500138476
Angle Grinder
178 S XCS Black Flexible 6,000 AC010592825Disc Pad PN7394
60980027753
3M™ Fibre Disc 581CApplications:• Entry level performance for both mild and stainless steel.• Prep work, bevelling or weld grinding.
Features:• Contains high quality Aluminium Zirconia mineral.• Thermo formed shape contours to 3M back up pad.
Size (mm) GradeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 16 P36 15,200 GC800984608 Back-up Pad PN07312 XC003410104
Angle Grinder
100 x 16 P60 15,200 GC800984681
115 x 22 P24 13,200 GC800984574 Back-up Pad PN09583 XC003410039115 x 22 P36 13,200 GC800984616
125 x 22 P24 12,000 GC800984582
Back-up Pad PN09584 XC003410047
125 x 22 P36 12,000 GC800984632
125 x 22 P60 12,000 GC800984707
125 x 22 P80 12,000 GC800984749
125 x 22 P120 12,000 GC800984558
180 x 22 P24 8,500 GC800984590
Back-up Pad PN09921 DC272921404
180 x 22 P36 8,500 GC800984665
180 x 22 P60 8,500 GC800984699
180 x 22 P80 8,500 GC800984731
180 x 22 P120 8,500 GC800984566
16 ANGLE GRINDERS | Abrasive Systems
Angle Grinders
Scotch-Brite™ Surface Conditioning DiscApplications:• Used for cleaning, finishing, blending and deburring applications.• Can be used to create decorative finishes on metal.
Features:• Industry leader for surface conditioning applications.• Available in multiple grades to cover most applications.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 16 A CRS Brown 15,200 61500291473
Back-up Pad PN61677 GN030104493
Angle Grinder
100 x 16 A MED Maroon 15,200 61500291465
100 x 16 A VFN Blue 15,200 61500291457
100 x 16 S SFN Grey 15,200 61500291879
115 x 22 A CRS Brown 13,200 61500291804
Back-up Pad PN61680 DE272906186
115 x 22 A MED Maroon 13,200 61500291796
115 x 22 A VFN Blue 13,200 61500291481
115 x 22 S SFN Grey 13,200 61500291887
125 x 22 A CRS Brown 12,200 61500291838
Back-up Pad PN61661 DE272906178
125 x 22 A MED Maroon 12,200 61500291820
125 x 22 A VFN Blue 12,200 61500291812
125 x 22 S SFN Grey 12,200 61500291895
178 x 22 A CRS Brown 8,500 61500291853
Back-up Pad PN61662 GN030106126
178 x 22 A MED Maroon 8,500 61500291507
178 x 22 A VFN Blue 8,500 61500291846
178 x 22 S SFN Grey 8,500 61500291903
Scotch-Brite™ Light Grinding and Blending DiscApplications:• Used for light grinding and blending work in metal fabrication.• Removal of surface burrs from the work piece.
Features:• Durable non-woven Cubitron™ abrasive product with excellent edge wear resistance.• Provides an aggressive cut and long life.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 16 Super Duty Blue 11,000* 61500292505 Back-up Pad PN61677 GN030104493
Angle Grinder
100 x 16 Heavy Duty Maroon 11,000* 61500292497
115 x 22 Super Duty Blue 10,000* 61500292455 Back-up Pad PN61680 DE272906186115 x 22 Heavy Duty Maroon 10,000* 61500292448
125 x 22 Super Duty Blue 10,000* 61500292539 Back-up Pad PN61661 DE272906178125 x 22 Heavy Duty Maroon 10,000* 61500292489
178 x 22 Super Duty Blue 6,000* 61500292562 Back-up Pad PN61662 GN030106126178 x 22 Heavy Duty Maroon 6,000* 61500292596
*Able to run at higher MOs’s when used with 3M™ Fibre disc Back-up Pads
17SanderS | abrasive Systems
Application Substrate
3M™ Paper Discs & Sheets Mineral Type Backing Pa
int R
emov
al
Blen
ding
& F
eath
er E
dgin
g
Prim
er S
andi
ng
Fini
shin
g
Gel C
oat
Com
posi
tes
Solid
Sur
face
E-Co
at
Prim
er/P
aint
Pre
p
Woo
d
Alum
iniu
m
Carb
on S
teel
Non-
Ferr
ous
(Bra
ss/B
ronz
e)
Best 236U Aluminium Oxide C Weight Paper • • • • • • • • • • •
Best 745I Ceramic Blend E Weight Paper • • • • • • • • • •
Best 734U Ceramic Blend C Weight Paper • • • • • • • • • • • •
Best 334U Aluminium Oxide C Weight Paper • • • • • • • • • • •
Best Green Corps Ceramic Blend E Weight Paper • • • • • • • • • •
Better 245 Aluminium Oxide E Weight Paper • • • • • • • • • •
Better 255P+ Aluminium Oxide C Weight Paper • • • • • • • • • • •
Good 338U Aluminium Oxide C Weight Paper • • • • • • • • • • •
3M™ Film Discs
Best 366L Aluminium Oxide Film • • • • • • • • •
Better 260L Aluminium Oxide Film • • • • • • • • •
3M™ Hookit™ & Stikit™ Products
3M™ Sanders• experience the power of a complete finishing system by
combining the 3M™ abrasives and accessories you’ve always trusted with the new line of 3M™ Tools, specifically designed to help get the job done more efficiently.
• 3M™ Air-Powered random Orbital sanders give you the power to maximize sanding performance for a smooth surface finish and minimize operational obstacles. Tools are packed with the horsepower to perform the way you need.
• Available in self generating vacumn, central vacumn and non vacunm variations.
5mm diamter Orbitfor general purpose sanding
8mm diamter Orbitfor aggressive sanding
2.5mm diameter Orbitfor finer finish sanding
for Sanders
The power lever on each sander is coded to indicate the orbit size of the sander
18 SanderS | abrasive Systems
Sanders
3M™ Hookit™ Clean Sand Paper Disc 236UApplications:• A premium aluminium oxide disc for sanding paint, primer, composites, wood, metal, plastic,
aluminium and fibreglass.• Resin bonded for increased cut and disc life.
Features:• New C weight backing provides flexibility and improved edge durability.• Hookit™ disc with precise hole design for improved dust extraction.
Size (mm) Grade Dust Pattern Product Order IDOptional
Interface Pad Recommended
Accessories Recommended Tools
75 P120 Clean Sand 236U - C wgt 60440273104 Interface PadPN05771
60455037782
Back-up PadPN20350
60440127227
SGV Oribit Sander PN2851160440238289
CV Oribit Sander PN285036044023820675 400 Clean Sand 236U - C wgt 60440273161
150 P80 Clean Sand 236U - C wgt 60440272973
Interface PadPN50544
DC272923988
Back-up PadPN05865
60455031009SGV Oribit Sander PN28462
XA100001412
CV Oribit SanderPN28461XA100001404
150 P120 Clean Sand 236U - C wgt 60440272999
150 P150 Clean Sand 236U - C wgt 60440273005
150 P180 Clean Sand 236U - C wgt 60440273013
150 P220 Clean Sand 236U - C wgt 60440273021
Back-up PadPN20465
60440128324
150 P240 Clean Sand 236U - C wgt 60440273039
150 P320 Clean Sand 236U - C wgt 60440273047
150 P400 Clean Sand 236U - C wgt 60440273054
150 P500 Clean Sand 236U - C wgt 60440273062
IMPROVED PERFORMANCE!
For ultimate results why not try the new and improved 236u with our market leading elite random Orbital sanders
• Durable composite cover.
• Sturdy, lightweight aluminium body.
• Internally located muffler to illuminate breakage when dropped.
• Speed control positioned to eliminate inadvertent adjustment.
• Ergonomically enhanced for less vibration, quiet operation, more wrist support and overall operator comfort.
• Lever is recessed, so no pinch points .
• Extended-to-base grip for improved tactile feel and reduced vibration.
19SanderS | abrasive Systems
Sanders
3M™ Hookit™ Purple Paper Disc - Clean Sand Applications:• Light weight discs for sanding primer, paint, metals and solid surface materials.• Can be used for final sanding of plastic filler and putty.
Features:• Disc with precise hole design for improved life and dust extraction. Use for rough featheredging.• 3M’s fastest cutting, longest lasting abrasive for saving labour costs and improving quality.
Size (mm) Grade Dust Pattern Product Order IDOptional
Interface PadRecommended
Accessories Recommended Tools
75 P80 Clean Sand 745I 60455052617
Interface PadPN05771
60455037782
Back-up PadPN20350
60440127227
SGV Oribit Sander PN2851160440238289
CV Oribit Sander PN2850360440238206
75 P120 Clean Sand 734U 60455036917
75 P180 Clean Sand 734U 60455036933
75 P240 Clean Sand 334U 60455036958
75 P320 Clean Sand 334U 60455036974
75 P400 Clean Sand 334U 60455036982
75 P500 Clean Sand 334U 60455036990
75 P600 Clean Sand 334U 60455047351
150 P80 Clean Sand 745I XA004181989
Interface PadPN50544
DC272923988
Back-up PadPN05865
60455031009
SGV Oribit Sander PN28462XA100001412
CV Oribit Sander PN28461XA100001404
150 P120 Clean Sand 734U XA004114741
150 P150 Clean Sand 734U XA004114733
150 P180 Clean Sand 734U XA004114725
150 P220 Clean Sand 334U XA004114717
Back-up PadPN20465
60440128324
SGV Oribit Sander PN28462XA100001412
CV Oribit Sander PN28461XA100001404
150 P240 Clean Sand 334U XA004114709
150 P320 Clean Sand 334U XA004114683
150 P400 Clean Sand 334U XA004114675
150 P500 Clean Sand 334U XA004114667
150 P600 Clean Sand 334U XA006702006SGV Oribit Sander PN28517
60440238347
CV Oribit Sander PN2850960440238263
150 P800 Clean Sand 334U XA006702014
3M™ Hookit™ Green Paper Disc (With dust extraction)Applications:• Used for stripping paint to metal shaping and sanding plastic filler.• Preliminary and intermediate sanding of hard and soft woods, plastics and metal surfaces.
Features:• Heavy weight paper for more aggressive sanding applications.• Open coat construction reduces loading on fresh filler.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Recommended Tools
150 36 6 Hole Green Corps 60455031710
Back-up PadPN20465
60440128324
SGV Oribit SanderPN28462
XA100001412
CV Oribit SanderPN28461
XA100001404
150 40 7 Hole 245 GC800973189
150 60 7 Hole 245 GC800973171
150 80 7 Hole 245 GC800973163
203 36 8 Hole Green Corps 60650014529
- Orbital Sanders203 40 8 Hole 245 GC800449396
203 80 8 Hole Green Corps 60650014495
20 SanderS | abrasive Systems
Sanders
3M™ Hookit™ Paper Disc (With dust extraction)Applications:• Ideal for intermediate and final sanding on lacquered hard and soft woods, paints lacquers, primers,
solid surface materials and plastics.
Features:• C weight paper disc with Hookit(TM) attachment for orbital sanders and off hand sanding.
Size (mm) Grade Dust Pattern Product Order IDOptional
Interface PadRecommended
Accessories Recommended Tools
150 P80 7 Hole 338U GC801032308
Interface PadPN05777
60455031264
Back-up Pad PN05865
60455031009 SGV Oribit Sander PN28462XA100001412
CV Oribit Sander PN28461XA100001404
150 P120 7 Hole 338U GC801032316
150 P150 7 Hole 338U GC801032324
150 P180 7 Hole 338U GC801032332
150 P240 7 Hole 338U GC801032357
Back-up PadPN05865
60455031009
150 P320 7 Hole 338U GC801032373
150 P400 7 Hole 338U GC801032399
150 P500 7 Hole 338U GC801032407
150 P600 7 Hole 338U GC801032415
SGV Oribit Sander PN2851760440238347
CV Oribit Sander PN2850960440238263
3M™ Hookit™ Gold Paper Disc (With dust extraction)Applications:• Anti loading benefits, particularly with fine grades on difficult to sand top coats and primers.• Intermediate and final sanding of furniture parts, varnished surfaces, kitchen counter-tops, plastic parts.
Features:• 255P+ 15-hole Discs and Pads achieve a better cut, with less loading and a reduction in airborne dust.• 15-hole configuration provides improved dust extraction.
Size (mm) Grade Dust Pattern Product Order IDOptional
Interface PadRecommended
Accessories Recommended
Tools
150 P80 15 Hole 255P+ GC801010254
Interface PadPN05777
60455031264
Back-up Pad PN05865
60455031009 SGV Oribit SanderPN28462
XA100001412
CV Oribit SanderPN28461
XA100001404
150 P100 15 Hole 255P+ GC801010262
150 P120 15 Hole 255P+ GC801010270
150 P150 15 Hole 255P+ GC801010288
150 P180 15 Hole 255P+ GC801010304
150 P220 15 Hole 255P+ GC801010296
Back-up PadPN05865
60455031009
150 P240 15 Hole 255P+ GC801010312
150 P320 15 Hole 255P+ GC801010338
150 P400 15 Hole 255P+ GC801010353
150 P500 15 Hole 255P+ GC801010247
203 P120 8 Hole 255P+ GC800487867
- - Orbital Sanders203 P180 8 Hole 255P+ GC800487842
203 P320 8 Hole 255P+ GC800487966
21SanderS | abrasive Systems
Sanders
3M™ Hookit™ Microfinishing Film Discs (With dust extraction)Applications:• Use on plastic, fibreglass, wood, metal, solid-surface composites.
Features:• Precision, micron-graded, resin-bonded, polyester film backing that creates aggressive cut with uniform finish.• The load resistant coating provides greater efficiency and longer product life.
Size (mm) Grade Dust Pattern Product Order IDOptional
Interface PadRecommended
Accessories Recommended Tools
150 15 MIC 6 Hole 366L AC019165524
Interface PadPN05777
60455031264
Back-up PadPN20465
60440128324
SGV Oribit Sander PN28462XA100001412
CV Oribit Sander PN28461XA100001404
150 20 MIC 6 Hole 366L AC019205189
150 30 MIC 6 Hole 366L 60200006298
3M™ Hookit™ Finishing Film Discs (With dust extraction)Applications:• For Primer sanding and top coat defect removal.• Designed for use in scuff sanding before painting, as well as to remove runs, dust nibs and excess
orange peel from paint and gelcoat prior to compounding.
Features:• Features a load resistant coating.• Resin bonded for heat resistance.
Size (mm) Grade Dust Pattern Product Order IDOptional
Interface PadRecommended
Accessories Recommended Tools
150 P600 7 Hole 260L GC800989730
Interface PadPN05777
60455031264
Back-up PadPN20465
60440128324
SGV Oribit Sander PN2851760440238347
CV Oribit Sander PN2850960440238263
150 P800 7 Hole 260L GC800989748
150 P1200 7 Hole 260L GC800989631
150 P1500 7 Hole 260L GC800989649
3M™ Hookit™ Finishing Film Discs (With dust extraction)Applications:• For dry sanding.
Features:• Resin bonded for heat resistance.• Features an anti-loading stearate coating.
Size (mm) Grade Dust Pattern Product Order IDOptional
Interface PadRecommended
Accessories Recommended Tools
150 P60 15-Hole 260L+ GC80106743
Interface Pad PN05774
XC003410120
PN0555160455034482
SGV Oribit SanderPN28462
XA100001412
CV Oribit SanderPN28461
XA100001404
150 P800 15-Hole 260L+ GC80106735
150 P1000 15-Hole 260L+ GC80106750
150 P1200 15-Hole 260L+ GC80106768
150 P1500 15-Hole 260L+ GC80106727
NEW!
22 SanderS | abrasive Systems
Sanders
3M™ Hookit™ Gold Paper Disc (No dust extraction)Applications:• Use for intermediate to fine finishing on all materials.• Anti loading benefits, particularly with fine grades on difficult to sand top coats and primers.
Features:• Constructed on a durable C weight paper backing with an Aluminium Oxide mineral and load resistant coating.
Size (mm) Grade Dust Pattern Product Order ID Recommended Tools
150 P80 No Holes 255P+ GC800504828
NV Oribit SanderPN28460
XA100001396
150 P120 No Holes 255P+ GC800504802
150 P150 No Holes 255P+ GC800504794
150 P180 No Holes 255P+ GC800504786
150 P240 No Holes 255P+ GC800504760
150 P320 No Holes 255P+ GC800504745
150 P400 No Holes 255P+ GC800504729
150 P500 No Holes 255P+ GC800504711
3M™ Hookit™ Green Paper Disc (No dust extraction)Applications:• Used for stripping paint to metal shaping and sanding plastic filler.• Hard wearing, heavy backed for coarse sanding applications.
Features:• Heavy weight paper for more aggressive sanding applications.• Open coat construction reduces loading on fresh filler.
Size (mm) Grade Dust Pattern Product Order ID Recommended Tools
150 36 No Holes Green Corps 60650011780 NV Oribit SanderPN28460
XA100001396150 40 No Holes Green Corps 60650011772
3M™ Hookit™ Finishing Film Discs (No dust extraction)Applications:• For Primer sanding and top coat defect removal.• Designed for use in scuff sanding before painting, as well as to remove runs, dust nibs, and excess
orange peel from paint and gelcoat prior to compounding.
Features:• Features a load resistant coating.• Resin bonded for heat resistance.
Size (mm) Grade Dust Pattern Product Order ID Recommended Tools
75 P600 No Holes 260L 60650034873NV Oribit Sander
PN28496XA100001313
75 P800 No Holes 260L 60455047351
75 P1200 No Holes 260L 60650034840
75 P1500 No Holes 260L 60650034832
23SanderS | abrasive Systems
Sanders
Scotch-Brite™ Hookit™ Random Orbital DiscsApplications:• Designed for prepping bare metal for painting or coating.
Features:• Engineered to give you a faster-cutting, longer lasting and more consistent alternative to paper and
cloth-back coated abrasives.• Constructed especially for random orbital/dual action sanders, using a non-woven nylon web
embedded with premium ceramic grain.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Tools
125 Coarse (80) Brown 12,000 61500298346 NV Oribit SanderPN20351
60440238149125 Medium (100) Maroon 12,000 61500297991
125 Fine (120) Green 12,000 61500298007
150 Coarse (80) Brown 10,000 61500298353 NV Oribit SanderPN28460
XA100001396150 Medium (100) Maroon 10,000 61500298023
150 Fine (120) Green 10,000 61500298015
3M™ Stikit™ Gold Film Discs (No dust extraction)Applications:• Used for shaping plastic filler and removing paint around damaged areas.
Features:• Anti-loading stearate treatment and open coat for more aggressive cutting.• 3M™ Stikit™ Gold Film Disc constructed on a tear-resistant, flexible film backing.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Recommended Tools
150 P120 No Holes 255L 60010025694Back-up Pad
PN05576 60980009264
NV Oribit SanderPN28460
XA100001396
150 P180 No Holes 255L 60010025553
150 P240 No Holes 255L 60010025652
150 P400 No Holes 255L 60010025611
Scotch-Brite™ Clean and Finish DiscApplications:• Flexible web for finishing, blending, and polishing.• Can be used for scuffing surfaces prior to painting or coating.
Features:• Conformability allows access to hard-to-reach areas.• Can be used with Hookit™ pack up pad for attachment to orbital sanders.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Tools
150 A VFN Maroon 4,000 AN019225083NV Oribit Sander
PN28460XA100001396
150 S ULF Grey 4,000 61500118148
150 Talc White 4,000 61500156072
NEW!
24 SanderS | abrasive Systems
Sanders
3M™ Stikit™ Paper Discs (No dust extraction)Applications:• Use for fine finishing on all materials.• Ideal for intermediate and final sanding on lacquered hard and soft woods, paints lacquers, primers, solid surface materials and plastics.
Features:• A high performance Aluminium Oxide on a light , incorporating Fre-Cut™ Anti-Loading Coating which extends its working life.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Recommended Tools
150 P80 No Holes 338U GC801027860
Back-up PadPN05576
60980009264
NV Oribit SanderPN28460
XA100001396
150 P100 No Holes 338U GC801027878
150 P120 No Holes 338U GC801027886
150 P150 No Holes 338U GC801027894
150 P180 No Holes 338U GC801027902
150 P240 No Holes 338U GC801027928
150 P320 No Holes 338U GC801027936
3M™ Hookit™ Purple Clean Sand Sheet RollsApplications:• Used for filler shaping and metal sanding applications.
Features:• Perforated sheet roll - easily snap desired sheet size for hand and file applications.• Single product for both dust-free and non-dust-free sanding.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Optional Tools
70 x 8M P40 Clean Sand 740I 60455053094Hookit™ Blocks
PN0520760455053110
PN0520860455053144
PN0520960455053136
SGV Oribit Sander PN2852960440238479
CV Oribit Sander PN2852860440238453
70 x 12M P80 Clean Sand 745I 60455053078
70 x 8M P120 Clean Sand 734U 60455053052
70 x 12M P180 Clean Sand 734U 60455053037
70 x 12M P240 Clean Sand 334U 60455053011
70 x 12M P320 Clean Sand 334U 60455052997
70 x 12M P400 Clean Sand 334U 60455052989
115 x 8M P40 Clean Sand 740I 60455053813
Hookit™ Block PN05216
60455053227Orbital Sheet Sanders
115 x 12M P80 Clean Sand 741I 60455053839
115 x 12M P120 Clean Sand 734U 60455053854
115 x 12M P180 Clean Sand 734U 60455053870
115 x 12M P240 Clean Sand 334U 60455053896
115 x 12M P320 Clean Sand 334U 60455053912
115 x 12M P400 Clean Sand 334U 60455053920
3M™ Stikit™ Green Paper Discs (No dust extraction)Applications:• Used for stripping paint to metal shaping and sanding plastic filler.• Preliminary and intermediate sanding of hard and soft woods, plastics and metal surfaces.
Features:• Heavy weight paper for more aggressive sanding applications.• Stikit™ attachment system. Each disc has an individual liner.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Recommended Tools
150 36 No Holes 251U 60650003746Back-up Pad
PN05576 60980009264
NV Oribit SanderPN28460
XA100001396
203 36 No Holes 251U 60650003779Back-up Pad
PN05712AC010595943
Orbital Sanders
25SanderS | abrasive Systems
Sanders
3M™ Hookit™ Gold Paper SheetsApplications:• A good, general purpose option for sanding paint, primer, wood, metal, plastic and fibreglass.• Works well where a heavier, more durable paper backing is required.
Features:• Constructed on a C weight, intermediate paper backing.• Premium Aluminium Oxide mineral with a load resistant coating.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Optional Tools
70 X 127 P80 8 Hole 255P GC800454669 Hookit™ BlockPN05207
60455053110SGV Oribit Sander PN28529
60440238479
CV Oribit Sander PN2852860440238453
70 X 127 P240 8 Hole 255P GC800454636
70 x 419 P80 14 Hole 255P GC800454719Hookit™ Block
PN0520960455053144
70 x 419 P120 14 Hole 255P GC800454701
70 x 419 P180 14 Hole 255P GC800454693
70 x 419 P240 14 Hole 255P GC800494541
81 x 153 P80 8 Hole 255P GC800454784
-
Orbital Sheet Sanders
81 x 153 P120 8 Hole 255P GC800454776
81 x 153 P240 8 Hole 255P GC800454750
115 x 225 P80 10 Hole 255P GC800454842
Hookit™ Block PN05216
60455053227
115 x 225 P120 10 Hole 255P GC800454834
115 x 225 P180 10 Hole 255P GC800492578
115 x 225 P240 10 Hole 255P GC800497585
115 x 225 P320 10 Hole 255P GC800497601
115 x 225 P400 10 Hole 255P GC800512268
3M™ Gold Paper RollApplications:• Suitable for sanding timber, fillers, lacquers, paint and metal surfaces.• Roll form allows for user to make custom length sheets for various tools and custom made hand sanding blocks
Features:• Premium Aluminium Oxide mineral on durable C-weight paper sheets.• Incorporates a a load resistant coating which extends work life.
Size (mm) Grade Dust Pattern Product Order ID Optional Tools
70 x 50M P80 No Holes 255P AC010594904 NV Oribit Sander PN285276044023844670 x 50M P120 No Holes 255P GC800745835
115 x 50M P40 No Holes 255P GC801024032
Orbital Sheet Sanders
115 x 50M P60 No Holes 255P GC801024040
115 x 50M P80 No Holes 255P AC010594938
115 x 50M P120 No Holes 255P GC800734110
115 x 50M P150 No Holes 255P GC801023943
115 x 50M P180 No Holes 255P GC801023950
115 x 50M P240 No Holes 255P GC801023976
115 x 50M P320 No Holes 255P GC801023992
26 SanderS | abrasive Systems
Sanders
3M™ Hookit™ Gold Paper RollApplications:• Suitable for sanding timber, fillers, lacquers, paint and metal surfaces, and is effective on hand
sanding blocks.
Features:• Hookit™ material with a premium Aluminium Oxide mineral on durable C-weight paper sheets.• Incorporates a a load resistant coating which extends work life.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Optional Tools
70 x 25M P40 No Holes 245 - E wgt GC800738442
Flexible Board PN83978
60980021558
Rigid Board PN09082
60430050546
NV Oribit Sander PN2852760440238446
70 x 25M P60 No Holes 255P+ - C wgt GC800736263
70 x 25M P80 No Holes 255P+ - C wgt GC800738467
70 x 25M P120 No Holes 255P+ - C wgt GC800738400
70 x 25M P240 No Holes 255P+ - C wgt GC800966365
115 x 25M P40 No Holes 245 - E wgt GC800633866
Orbital Sheet Sanders
115 x 25M P60 No Holes 255P+ - C wgt GC800594860
115 x 25M P80 No Holes 255P+ - C wgt AC010574310
115 x 25M P120 No Holes 255P+ - C wgt AC010574328
115 x 25M P150 No Holes 255P+ - C wgt GC800966449
115 x 25M P180 No Holes 255P+ - C wgt GC800966431
115 x 25M P240 No Holes 255P+ - C wgt GC800966423
115 x 25M P320 No Holes 255P+ - C wgt GC800966415
27HAND SANDING | Abrasive Systems
Application
3M™ Sheets, Blocks & Sponges Mineral Maintenance Paint Prep Blen
ding
Debu
rrin
g
Fini
shin
g
Clea
ning
Best 734 (Sheets) Silicon Carbide • • •
Best 314 (Sheets) Aluminium Oxide • •
Better 216U (Foam Backed Sheets) Aluminium Oxide • • •
Better Sanding Blocks Aluminium Oxide • •
Better Hi-Flex Sanding Sponges Aluminium Oxide • •
Best Soft Back Sanding Sponges Aluminium Oxide • •
Scotch-Brite™ Sheets and Rolls
Best Durable Flex Aluminium Oxide • • • • •
Best 7440 (Hand Pad) Aluminium Oxide • • • •
Better 7446 (Hand Pad) Aluminium Oxide • • • •
Better 7447 (Hand Pad) Aluminium Oxide • • • • •
Better 8447 (Perforated Hand Pad) Aluminium Oxide • • • • •
Best 7448 (Hand Pad) Silicon Carbide • • • •
Better 449 (Hand Pad) Talc • • •
Better Multi-flex (Perforated Roll) Aluminium Oxide and Silicone Carbide • • • •
Best Cut & Polish (Roll) Aluminium Oxide • • • • •
Better Clean & Finish (Roll) Aluminium Oxide and Silicone Carbide • • • • •
Hand Sanding3M™ & Scotch-Brite™
Durable Flex Hand PadsThe new scotch-Brite™ durable Flex hand pad combines high performance features to give you the fast, flexible and consistent action your finishing jobs require.
FlexibleIncreased scratch density – but still very flexible so it can get into hard
to sand places.
DurableTough non-woven nylon fibres specially coated to minimise loading for
a uniform finish throughout life of the hand pad.
VersatileAvailable in two grades, ideal for everyday uses like prepping surfaces
for primer colour coat, general scuffing, cleaning and hand blending.
High PerformanceTakes less time to prepare surfaces.
3
3
3
3
NEW!
28 HAND SANDING | Abrasive Systems
Hand Sanding
3M™ Gold Paper Sheets
3M™ Wetordry™ Paper Sheets
Applications:• Use for fine finishing on timber, primers and painted surfaces.
Features:• A high performance aluminium oxide mineral on a C weight paper backing.• An anti loading treatment has been applied to extend the working life of the product.
Applications:• Flexible and conformable water resistant paper backing for easier handling.
Features:• Sharp, abrasive Silicone Carbide mineral ensures long product life and good surface quality.• Use wet or dry.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Optional Tools
230 x 280 P80 No Holes 255P GC800708015
Sanding BlockPN05519
60980020147Orbital Sheet Sanders
230 x 280 P100 No Holes 255P GC800731827
230 x 280 P120 No Holes 255P GC800731777
230 x 280 P150 No Holes 255P GC801023778
230 x 280 P180 No Holes 255P GC801023786
230 x 280 P220 No Holes 255P GC801023794
230 x 280 P240 No Holes 255P GC801023802
230 x 280 P280 No Holes 255P GC801023810
230 x 280 P320 No Holes 255P GC801023828
230 x 280 P400 No Holes 255P GC801023844
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Optional Tools
230 x 280 P80 No Holes 734 GC800316512
Sanding BlockPN05519
60980020147Orbital Sheet Sanders
230 x 280 P120 No Holes 734 GC800316496
230 x 280 P180 No Holes 734 GC800316470
230 x 280 P220 No Holes 734 GC074316016
230 x 280 P240 No Holes 734 GC074317014
230 x 280 P280 No Holes 734 GC074318012
230 x 280 P320 No Holes 734 GC074319010
230 x 280 P400 No Holes 734 GC074324010
230 x 280 P600 No Holes 734 GC074326015
230 x 280 P800 No Holes 734 GC074327013
230 x 280 P1000 No Holes 734 GC074390011
230 x 280 P1200 No Holes 734 GC074391019
3M™ Wetordry™ Paper SheetsApplications:• Sanding hard primer coats, especially on two-pack acrylic lacquers. • Filler-coated surfaces and/or intermediate lacquer coats prior to final lacquering.
Features:• High performance aluminium oxide paper• Water-resistant flexible backing.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Optional Tools
230 x 280 P240 No Holes 314 GC223140168
Sanding BlockPN05519
60980020147Orbital Sheet Sanders
230 x 280 P320 No Holes 314 GC223140143
230 x 280 P400 No Holes 314 GC223140127
230 x 280 P600 No Holes 314 GC223140101
230 x 280 P800 No Holes 314 GC223140093
230 x 280 P1200 No Holes 314 GC223140077
29HAND SANDING | Abrasive Systems
Hand Sanding
3M™ Flexible Abrasives Hookit™ SheetApplications:• Ideal for hand sanding applications including primer sanding, blend preparation and paint finishing. This product
provides excellent cut and finish performance with high flexibility, conformability, and a soft feel.
Features:• Use wet or dry, hand or machine and wipe clean frequently to extend the life.• Hand pad included in each box.
Size (mm) Grade Dust Pattern Product Order ID Recommended Accessories Optional Tools
140 x 170 P400 No Holes 34337 60455069991
-Orbital Sander PN20331
60440127037
140 x 170 P600 No Holes 34337 60455070007
140 x 170 P800 No Holes 34340 60455070015
140 x 170 P1000 No Holes 34341 60455070023
140 x 170 P1200 No Holes 34342 60455070031
140 x 170 P1500 No Holes 34343 60455070049
3M™ Gold Soft Hand RollsApplications:• Performs well on most wood types.• Ideal for difficult to sand areas.
Features:• Combination of an A weight paper and flexible foam backing to create a soft sanding sheet for hand finishing.• Each sheet (114 x 135mm) is dispensed from a perforated roll.
Size (mm) Grade Dust Pattern Product Order ID
114 x 25M P180 No Holes 216U GC801005445
114 x 25M P240 No Holes 216U GC801005460
114 x 25M P320 No Holes 216U GC801005486
114 x 25M P400 No Holes 216U GC801005502
114 x 25M P500 No Holes 216U GC801005510
114 x 25M P600 No Holes 216U GC801005528
114 x 25M P800 No Holes 216U GC801005536
3M™ Sanding BlockApplications:• Ideal for dry or wet sanding of wood, paint, metal, plastic and fibre cement.• Rinse and reuse.
Features:• Abrasive on all four sides.• Conformable so you can get into tough to reach spots.
Size (mm) Grade Product Order ID
96 x 66 x 25 Medium 03802 DC272924325
96 x 66 x 25 Fine 03801 DC272924317
3M™ Hi-Flex Sanding SpongesApplications:• Conformable, flexible and convenient sponges are great for sanding wood, paint, metal, plastic and fibre cement.• Can be used for either dry or wet sanding rinse and reuse.
Features:• Features abrasive on two sides.• Conformable, extremely flexible and convenient.
Size (mm) Grade Product Order ID
96 x 123 x 12 Medium 03805 DC272921198
96 x 123 x 12 Fine 03804 DC272924366
NEW!
30 HAND SANDING | Abrasive Systems
Hand Sanding
3M™ Soft Back Sanding SpongesApplications:• A perfect solution for sanding wood, paint, metal, plastic and fibre cement.• Can be used for either dry or wet sanding.
Features:• Engineered with abrasive on one side.• Conformable, extremely flexible and convenient.
Size (mm) Grade Product Order ID
115 x 140 x 5 Medium 03808 XC003406367
115 x 140 x 5 Fine 03809 XC003406375
115 x 140 x 5 Super Fine 03810 XC003406383
115 x 140 x 5 Ultra Fine 02601 FC110027453
115 x 140 x 5 Micro Fine 02600 FC110027446
Scotch-Brite™ Clean and Finish RollsApplications:• Touch up work on brushed stainless steel and aluminium or matt finishing
on metals, plastic timber and lacquers.• Can be cut to desired length for hand sanding or oscillating sanders.
Features:• Can be used wet or dry, will not rust or clog.• Custom widths available on request.
Size (mm) Grade Colour Order IDEquivalent Hand Pad
Optional Accessory
115 x 10M A VFN Maroon AC019230260 8447, 7447 Hand Block PN952 61500018652115 x 9.1M S ULF Light Grey 61000043317 7448
Scotch-Brite™ Multi-Flex Abrasive Sheet RollsApplications:• 7521 is a highly conformable abrasive with high cut for paint preparation
and wood finishes without dumping edges.• 7522 is a highly conformable abrasive with silicon carbide mineral for
exceptional finishes on wood and metal.
Features:• Can be used wet or dry, will not rust or clog.• Highly conformable and load resistant.
Size (mm) Grade Type Colour Order ID
100 x 200 x 60 sheets A VFN 7521 Maroon 61500129244
100 x 200 x 60 sheets S ULF 7522 Light Grey 61500134426
Scotch-Brite™ Cut and Polish RollsApplications:• Touch up work on brushed stainless steel and aluminium or matt finishing
on metals, plastic timber and lacquers.
Features:• Can be used wet or dry, will not rust or clog.• Custom widths available on request.
Size (mm) Grade Colour Order IDEquivalent Hand Pad
Optional Accessory
25 x 9M A MED Tan 61500121704 7440Mandrel PN935 61988809358
31HAND SANDING | Abrasive Systems
Hand Sanding
Scotch-Brite™ Durable Flex Hand PadsApplications:• Maroon pad used for primer prep while grey pad is finer and suited mor for colour prep.• Ultra flexible and conformable web for cleaning or fine finishing.
Features:• Tightly graded with more active mineral sites for fast, consistent action without compromising your
final finish.• Durable, specially-coated to resist loading and prolong pad life.
Size (mm) Grade Product # Type Colour Order ID
115 x 225 A VFN 64659 Scuff Pad Maroon 61500297686
115 x 225 S ULF 64660 Scuff Pad Grey 61500297694
Scotch-Brite™ Hand PadsApplications:• Clean, blend, finish, and deburr faster, easier and with better results than conventional abrasives.• Long life performance on aluminium, stainless steel, plastics, wood and fibreglass.
Features:• Can be used wet or dry, will not rust or clog.• Consistent surface finishing.
Size (mm) Grade Product # Type Colour Order IDEquivalent
Roll MaterialOptional
Accessory
150 x 230 A MED 7440 Heavy Duty Tan 61500123205Cut and Polish
A Medium
Hand Block #95261500018652
150 x 230 S MED 7446 Blending Grey 61500295508 N/A
150 x 230 A VFN 8447 Production Maroon 61500136686Clean and Finish
A Very Fine
150 x 230 A VFN 7447 General Purpose Maroon 61500123239Clean and Finish
A Very Fine
150 x 230 S ULF 7448 Ultra Fine Light Grey 61500123247Clean and Finish
S Ultra Fine
150 x 230 Delicate 449 Cleaning White WN200031550 N/A
NEW!
32 3M™ TeCHNOLOgy | Abrasive systems
3M™ Technology
3M™ Trizact™ Abrasives
Scotch-Brite™ Surface Conditioning Products
Determined to provide the ultimate solution for precision finishing work, 3M™ Trizact™ abrasives allow you to say goodbye to erratic, inconsistent finishes generated by conventional coated abrasives.
The unique microreplicated construction of 3M™ Trizact™ Abrasives can deliver:
• Consistent, predictable finishes• Higher, more even rates of cut• Cooler finishing temperatures• Reduced processing steps
The advantages of using genuine Scotch-Brite™ have been experienced by industries around the world for more than 50 years. 3M combines abrasive mineral with it non woven technology to create products that produce consistently uniform finishes to a work piece with minimal stock removal.
This three-dimensional, open structured material can deliver:
• Consistent, predictable finishes free from burrs• Reduced risk of warping or discolouring because of lower heat
generation• Longer product life because of reduced loading• Reduced risk of undercutting
How is 3M™ Trizact™ different?
Conventional abrasives start out sharp, but they dull quickly. These randomly arranged minerals, wear and finish unevenly.
3M™ Trizact™ Abrasives have three-dimensional structures containing multiple layers of abrasive mineral. As these pyramid-like structures wear, fresh, sharp mineral is exposed. This creates consistent performance and eliminates belt-to-belt variation.
This technology is used in: 3M™ Trizact™ Cloth Belts 237AA
ideal for fine metal finishing, including high precision and cosmetic or visual finishing. suitable for stainless steel, mild steel, tool steels, cobalt, nickel alloys and titanium.
> see page 33
This technology is used in: Scotch-Brite™ Surface Conditioning Belts & Discs
used for a wide range of applications including decorative finishing, grindline conditioning, and blending on a variety of metals. The durable reinforced nylon and abrasive belts allow controlled cut to eliminate gouging, run cool and leave burr free finishes. suitable for stainless steel, mild steel, tool steels, cobalt, nickel alloys and titanium.
> see page 34
use scotch-Brite™ surface Conditioning Belts to achive your desired finish on stainless steel
#3 Finish - A Coarse #4 Finish - A Medium
#5 Finish - A Very Fine - S Super Fine
Close up view of conventional abrasives
Close up view of 3M™ Trizact™ Abrasives
Conventional
Trizact™ structure
33BELT MachinEs | abrasive systems
Belt Machines
3M™ & Scotch-Brite™
Belts
Belt Speed Recommendations
3M provides a broad range of products for your abrasive belt needs with each product offering best-in-class performance! To help you get the most out of your 3M abrasives belts, we have provided the recommenced speeds at which you should be running your belts.
Equipment Application Substrate
3M Belts File
Bel
t
Port
able
Too
ls
Back
stan
d Gr
inde
rs
Lini
sher
s
Wid
e Be
lts
Edge
San
ding
Grin
ding
Debu
rrin
g
Blen
ding
Fini
shin
g
Coat
ing
Rem
oval
Stai
nles
s St
eel
Alum
iniu
m
Carb
on S
teel
Cast
Iron
Tita
nium
Nick
el A
lloy
Non-
Ferr
ous
(Bra
ss/B
ronz
e)
Best 3M™ Cubitron™ II Cloth Belt 984F • • • • • • • • • •
Better 3M™ Cloth Belt 577F • • • • • • • • •
Good 3M™ Cloth Belt 351A • • • • • • • • • • • • • •
Best 3M™ Cloth Belt 237AA • • • • • • • • • • • •
Scotch-Brite™ Belts
Best Scotch-Brite™ Durable Flex • • • • • • • • • • •
Better Scotch-Brite™ Surface Conditioning • • • • • • • • • • • • • •
Grade Availability Chart
Coated Abrasive Speed Recommendations for Off-Hand Applications(sFPM = surface Feet Per Minute)
Scotch-Brite™ Belts Application Speed Recommendations(sFPM = surface Feet Per Minute)
Alloy Belt Speed (SFPM) Applicable Belt Grades
Cast Iron 7,000 24-120
Carbon Steel 6,500 24-120
Stainless Steel 6,500-7,000 36-120
Nickel Alloys 6,000 36-120
Titanium 2,500-3,000 36-180
Aluminium7,500-8,500 24-120
6,500-7,000 Finer grades
Brass 7,000-8,000 36-180
Application Belt Speed (SFPM)
Decorative Finishing 500-3,000
Deburring 5,000-6,500
Cleaning & Conditioning 2,000-5,000
Oxide Removal 4,500-6,500
Maximum Operating Speed: 6,500 SFPM
P24 P36 P40 P50 P60 P80 P100 P120 P150 P180 P200 P220 P240 P280 P320 P360 P400 P500 P600 P800 P1000 P1200 P1500 P2000 P3000
984F 36+ 60+ 80+
577F 36 40 60 80 120
351A P40 P60 P80 P120 P180 P240 P320
237AA A160 A100 A80 A60 A45 A30 A16 A6
Scotch-Brite™ Durable Flex
Coarse Medium Fine
Scotch-Brite™ Surface Conditioning
SE Coarse Coarse Medium Very Fine Super Fine
34 BELT machinEs | abrasive systems
Belt Machines
3M™ Cubitron™ II Cloth Belts 984FApplications:• Suitable for grinding, blending, finishing and deburring applications on virtually all metal types.• Ideal for stainless steel, mild steel, aluminium and titanium.
Features:• Grinds Faster, Lasts Longer, Cuts Cooler.• Combining a patented, precision shaped Ceramic grain and a manufacturing process that makes each mineral point toward the work piece.
Size (mm) Grade Mineral Order ID Recommended Tools
10 x 330 36+ Ceramic XC002065982
File and Portable Belts
10 x 330 60+ Ceramic XC002066154
10 x 330 80+ Ceramic XC002066329
12 x 457 36+ Ceramic XC002065990
12 x 457 60+ Ceramic XC002066162
12 x 457 80+ Ceramic XC002066337
20 x 457 80+ Ceramic XC002066345
20 x 520 36+ Ceramic XC002066014
20 x 520 60+ Ceramic XC002066188
20 x 520 80+ Ceramic XC002066352
30 x 533 36+ Ceramic XC002066022
30 x 533 60+ Ceramic XC002066196
30 x 533 80+ Ceramic XC002066360
50 x 915 36+ Ceramic XC002066030
Linishing and Fixed Machines
50 x 915 60+ Ceramic XC002066204
50 x 915 80+ Ceramic XC002066378
50 x 1220 36+ Ceramic XC002066048
50 x 1220 60+ Ceramic XC002066212
50 x 1220 80+ Ceramic XC002066386
100 x 1520 60+ Ceramic XC002066261
100 x 1520 80+ Ceramic XC002066436
50 x 2440 36+ Ceramic XC002066063
75 x 2000 36+ Ceramic XC002066071
75 x 2000 60+ Ceramic XC002066246
100 x 915 36+ Ceramic XC002066089
100 x 915 60+ Ceramic XC002066253
100 x 915 80+ Ceramic XC002066428
100 x 2000 36+ Ceramic XC002067178
100 x 2440 36+ Ceramic XC002066113
100 x 2440 60+ Ceramic XC002066287
100 x 4270 36+ Ceramic XC002066139
100 x 4270 60+ Ceramic XC002066303
150 x 2000 36+ Ceramic XC002066147
150 x 2000 80+ Ceramic XC002066485
ATTeNTiON: Belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3M sales specialist or 3M Authorised distributor.
Unique + grades for revolutionary products
Multiple grading systems have been created as mineral technology evolves, and Cubitron™ ii abrasives are no exception.
engineered triangular shapes can’t be boxed into the screens used for grading today. Precision shaped grain is bigger, better, faster and longer lasting than ANsi-graded abrasives.
you can count on 3M to meet or beat your current grinding process time.
3M™ Cubitron™ II Abrasive Grading Comparison
Conventional Grade 3M™ Cubitron™ II
P100
80+P80
P60
60+P50
36+P40
P36
P24
35BELT MachinEs | abrasive systems
Belt Machines
Size (mm) Grade Mineral Order IDRecommended
Tools
100 x 915 100 Alumina Zirconia AC019187858
100 x 915 120 Alumina Zirconia AC019176571
100 x 927 60 Alumina Zirconia AC019177602
100 x 1220 36 Alumina Zirconia AN019302924
100 x 1220 40 Alumina Zirconia AN019302965
100 x 1220 60 Alumina Zirconia AC019177586
100 x 1220 80 Alumina Zirconia AC019177123
100 x 1220 120 Alumina Zirconia AN019303096
100 x 1520 40 Alumina Zirconia AC019174732
100 x 1520 60 Alumina Zirconia AC019174773
100 x 1520 80 Alumina Zirconia AC019177115
100 x 2440 36 Alumina Zirconia AC019178304
100 x 2440 40 Alumina Zirconia AC019174740
100 x 2440 60 Alumina Zirconia AC019281743
100 x 2440 120 Alumina Zirconia AC019191570
100 x 4270 36 Alumina Zirconia AC019178270
100 x 4270 40 Alumina Zirconia AC019177959
100 x 4270 80 Alumina Zirconia AN019303054
150 x 1220 36 Alumina Zirconia AN019302932
150 x 1220 40 Alumina Zirconia AN019302957
150 x 1220 60 Alumina Zirconia AC019177511
150 x 1220 80 Alumina Zirconia AC019176968
150 x 1220 120 Alumina Zirconia AC019176530
150 x 1520 36 Alumina Zirconia AC019178254
150 x 1520 40 Alumina Zirconia AC019177934
150 x 1520 60 Alumina Zirconia AC019177495
150 x 1520 120 Alumina Zirconia AC019205239
150 x 2000 40 Alumina Zirconia AC019177926
150 x 2000 60 Alumina Zirconia AC019177479
150 x 2260 80 Alumina Zirconia AC019195919
150 x 4270 40 Alumina Zirconia AN019302981
150 x 4270 60 Alumina Zirconia AN019303021
150 x 4270 80 Alumina Zirconia AN019303088
150 x 4270 120 Alumina Zirconia AN019303104
3M™ Cloth Belts 577FApplications:• Excellent performance on stainless and exotic alloys.• Suitable for metal grinding and can be run wet or dry.
Features:• Alumina Zirconia abrasive product constructed on a YF weight, water resistant polyester cloth backing.• Ideal for backstand, swing frame, stroke sanding, portable belt grinding, wide belt grinding and polishing.
Size (mm) Grade Mineral Order IDRecommended
Tools
10 x 330 40 Alumina Zirconia AC019178189
File and Portable Belts
10 x 330 60 Alumina Zirconia AC019177868
10 x 330 80 Alumina Zirconia AC010419201
10 x 330 120 Alumina Zirconia AC019176746
12 x 457 36 Alumina Zirconia AN019302908
12 x 457 40 Alumina Zirconia AC010419524
12 x 457 60 Alumina Zirconia AC019177834
12 x 457 80 Alumina Zirconia AC019178171
12 x 610 36 Alumina Zirconia AN019302916
12 x 610 40 Alumina Zirconia AC019178163
12 x 610 60 Alumina Zirconia AN019303013
12 x 610 80 Alumina Zirconia AN019303062
20 x 520 36 Alumina Zirconia AC010419540
20 x 520 40 Alumina Zirconia AC010419508
20 x 520 60 Alumina Zirconia AC019177560
20 x 520 80 Alumina Zirconia AC019192965
20 x 520 120 Alumina Zirconia AC019176704
30 x 533 36 Alumina Zirconia AC019178411
30 x 533 60 Alumina Zirconia AC019177776
30 x 533 80 Alumina Zirconia AC019177305
90 x 400 80 Alumina Zirconia AC019174807
90 x 410 40 Alumina Zirconia AC019182255
90 x 410 60 Alumina Zirconia AC019182180
90 x 410 80 Alumina Zirconia AC019182107
90 x 410 120 Alumina Zirconia AC019182008
100 x 610 60 Alumina Zirconia AC019188291
50 x 915 36 Alumina Zirconia AC019178387
Linishing and Fixed Machines
50 x 915 40 Alumina Zirconia AC019178072
50 x 915 60 Alumina Zirconia AC010594920
50 x 915 80 Alumina Zirconia AC010595554
50 x 915 100 Alumina Zirconia AC019175607
50 x 915 120 Alumina Zirconia AC019176662
50 x 1220 36 Alumina Zirconia AC019174674
50 x 1220 40 Alumina Zirconia AC019178064
50 x 1220 60 Alumina Zirconia AC010594912
50 x 1220 80 Alumina Zirconia AC019177263
50 x 1220 100 Alumina Zirconia AC019176877
50 x 1220 120 Alumina Zirconia AC019176654
50 x 1520 36 Alumina Zirconia AC019174690
50 x 1520 60 Alumina Zirconia AC019177735
50 x 1520 80 Alumina Zirconia AC019177255
50 x 1520 120 Alumina Zirconia AC019176647
50 x 2440 36 Alumina Zirconia AC019178379
50 x 2440 40 Alumina Zirconia AC019178049
50 x 2440 60 Alumina Zirconia AC019177727
50 x 2440 80 Alumina Zirconia AC019177222
75 x 2000 36 Alumina Zirconia AC019178353
75 x 2000 40 Alumina Zirconia AC019178031
75 x 2000 60 Alumina Zirconia AC019177677
75 x 2000 80 Alumina Zirconia AC019188135
100 x 915 40 Alumina Zirconia AC019178015
100 x 915 60 Alumina Zirconia AC019177610
100 x 915 80 Alumina Zirconia AC019177156ATTeNTiON: Belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3M sales specialist or 3M Authorised distributor.
36 BELT machinEs | abrasive systems
Belt Machines
3M™ Cloth Belts 351AApplications:• Provides good stock removal rates and fine finishes for feed through and off hand grinding.• Ideal for backstand, swing frame, stroke sanding, wide belt grinding and polishing.
Features:• Suitable for general purpose applications.• Premium aluminium oxide mineral on a durable cloth backing.
Size (mm) Grade Mineral Order IDRecommended
Tools
10 x 330 60 Aluminium Oxide AC019180622
File and Portable Belts
10 x 330 80 Aluminium Oxide AC019175870
10 x 330 120 Aluminium Oxide AC019176138
20 x 457 40 Aluminium Oxide AC019192056
20 x 520 60 Aluminium Oxide AC010419607
20 x 520 80 Aluminium Oxide AC019175953
20 x 520 120 Aluminium Oxide AC019176174
25 x 610 60 Aluminium Oxide AC019237794
25 x 610 80 Aluminium Oxide AC019180250
75 x 533 40 Aluminium Oxide HC000399812
75 x 533 60 Aluminium Oxide AC010580101
75 x 533 80 Aluminium Oxide AC010579889
75 x 533 120 Aluminium Oxide AC010580226
75 x 610 40 Aluminium Oxide AC010580069
75 x 610 60 Aluminium Oxide AC010580119
75 x 610 80 Aluminium Oxide AC010579897
75 x 610 120 Aluminium Oxide AC010580234
90 x 285 80 Aluminium Oxide AC019174964
90 x 285 120 Aluminium Oxide AC019182479
90 x 400 40 Aluminium Oxide AC010580093
90 x 400 60 Aluminium Oxide AC010579871
100 x 610 80 Aluminium Oxide AC010578683
50 x 915 60 Aluminium Oxide AC010578667
Linishing and Fixed Machines
50 x 915 80 Aluminium Oxide AC010578709
50 x 915 100 Aluminium Oxide AC019179781
50 x 915 120 Aluminium Oxide AC010578717
50 x 915 180 Aluminium Oxide AC019282295
50 x 1220 40 Aluminium Oxide AC010578626
50 x 1220 60 Aluminium Oxide AC010578659
50 x 1220 80 Aluminium Oxide AC010578691
50 x 1220 100 Aluminium Oxide AC010579939
50 x 1220 120 Aluminium Oxide AC010579962
50 x 1220 240 Aluminium Oxide AC019238289
50 x 1520 80 Aluminium Oxide AC010580135
50 x 1520 100 Aluminium Oxide AC019179765
50 x 1520 120 Aluminium Oxide AC010580200
50 x 2440 80 Aluminium Oxide AC010580143
100 x 915 80 Aluminium Oxide AC019180029
100 x 927 40 Aluminium Oxide AC010579822
100 x 927 80 Aluminium Oxide AC010579905
100 x 927 120 Aluminium Oxide AC010580192
100 x 1220 60 Aluminium Oxide AC019183098
100 x 1220 80 Aluminium Oxide AC019179989
100 x 1330 60 Aluminium Oxide AC019175821
100 x 1330 80 Aluminium Oxide AC019179971
100 x 1330 100 Aluminium Oxide AC019179617
100 x 1520 60 Aluminium Oxide AC010578642
100 x 1520 120 Aluminium Oxide AC010579947
100 x 1520 180 Aluminium Oxide AC010580242
100 x 2440 40 Aluminium Oxide AC019181522
100 x 2440 60 Aluminium Oxide AC019180408
100 x 2440 80 Aluminium Oxide AC019179948
100 x 2440 120 Aluminium Oxide AC019191249
Size (mm) Grade Mineral Order IDRecommended
Tools
100 x 4270 40 Aluminium Oxide AC019176068
Linishing and Fixed Machines
100 x 4270 60 Aluminium Oxide AC019180382
150 x 1220 60 Aluminium Oxide AC019175813
150 x 1220 80 Aluminium Oxide AC019179914
150 x 1520 60 Aluminium Oxide AC019175839
150 x 1520 80 Aluminium Oxide AC019175896
150 x 1520 100 Aluminium Oxide AC019176273
ATTeNTiON: Belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3M sales specialist or 3M Authorised distributor.
37BELT MachinEs | abrasive systems
Belt Machines
3M™ Trizact™ Cloth Belts 237AAApplications:• Designed for medium to high pressure finishing applications on metal.• Provides excellent finish consistency, especially on stainless steel.
Features:• An aluminium oxide Trizact™ cloth belt constructed on a X-weight, durable cloth backing.• Resin bonded for heat resistance. Features grinding aid for cooler grinding.
Size (mm) Grade Mineral Order ID Recommended Tools
30 x 533 A30 Aluminium Oxide AC019217861
File and Portable Belts
50 x 316 A100 Aluminium Oxide AC019224594
50 x 321 A65 Aluminium Oxide AC019211575
50 x 321 A30 Aluminium Oxide AC019211567
90 x 400 A160 Aluminium Oxide AC019210148
90 x 400 A100 Aluminium Oxide AC019175473
90 x 400 A45 Aluminium Oxide AC019210569
90 x 400 A30 Aluminium Oxide AC019209744
90 x 400 A16 Aluminium Oxide AC019175481
100 x 285 A100 Aluminium Oxide AC019223281
100 x 286 A160 Aluminium Oxide AC019227605
100 x 286 A100 Aluminium Oxide AC019227597
100 x 315 A160 Aluminium Oxide AC019209694
50 x 915 A160 Aluminium Oxide AC019305195
Linishing and Fixed Machines
50 x 915 A100 Aluminium Oxide AC019211898
50 x 915 A65 Aluminium Oxide AC019214009
50 x 915 A80 Aluminium Oxide AC019209769
50 x 915 A45 Aluminium Oxide AC019211880
50 x 915 A16 Aluminium Oxide AC019211450
50 x 915 A6 Aluminium Oxide AC019209504
50 x 1220 A30 Aluminium Oxide AC019211609
75 x 1990 A30 Aluminium Oxide AC019228264
75 x 1990 A16 Aluminium Oxide AC019228256
100 x 4270 A100 Aluminium Oxide AC019212391
100 x 4270 A65 Aluminium Oxide AC019228132
100 x 4270 A45 Aluminium Oxide AC019228199
100 x 4270 A30 Aluminium Oxide AC019228207
100 x 4270 A16 Aluminium Oxide AC019212151
ATTeNTiON: Belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3M sales specialist or 3M Authorised distributor. 3M™ Trizact™ Grading System
Trizact ™Abrasive Grade
Conventional Grade
A160 P120
P150
P180
A100
P220
P240
A80
A65 P280
P320
A45 P360
P600
A30
P800
A16 P1200
A6 P2000
38 BELT machinEs | abrasive systems
Belt Machines
Scotch-Brite™ Durable Flex BeltsApplications:• Blending welds, matching a finish or cleaning before welding.• Conformability and cutting power needed to access the tightest corners, tackle small welds and blend finishes.
Features:• This reinforced, low-stretch belt offers good flexibility, great edge durability and reduced elongation.
Size (mm) Grade ColourMax Operating Speed (SFPM)
Order ID Recommended Tools
6 x 457 A CRS Brown 6,500 61500295961
File and Portable Belts
6 x 457 A MED Maroon 6,500 61500295805
6 x 457 A FIN Green 6,500 61500295888
10 x 330 A CRS Brown 6,500 AC010593344
10 x 330 A MED Maroon 6,500 AC010593351
10 x 330 A FIN Green 6,500 AC010593369
12 x 457 A CRS Brown 6,500 61500295995
12 x 457 A MED Maroon 6,500 61500295839
12 x 457 A FIN Green 6,500 61500295912
12 x 520 A CRS Brown 6,500 AC010593377
12 x 520 A MED Maroon 6,500 AC010593385
12 x 520 A FIN Green 6,500 AC010593393
12 x 533 A CRS Brown 6,500 AC010593401
12 x 533 A MED Maroon 6,500 AC010593419
12 x 533 A FIN Green 6,500 AC010593427
12 x 610 A CRS Brown 6,500 61500296001
12 x 610 A MED Maroon 6,500 61500295847
12 x 610 A FIN Green 6,500 61500295920
13 x 305 A CRS Brown 6,500 61500295987
13 x 305 A MED Maroon 6,500 61500295821
13 x 305 A FIN Green 6,500 61500295904
20 x 520 A CRS Brown 6,500 AC010593435
20 x 520 A MED Maroon 6,500 AC010593443
20 x 520 A FIN Green 6,500 AC010593450
25 x 610 A CRS Brown 6,500 AC010593468
25 x 610 A MED Maroon 6,500 AC010593476
25 x 610 A FIN Green 6,500 AC010593484
30 x 533 A CRS Brown 6,500 AC010593492
30 x 533 A MED Maroon 6,500 AC010593500
30 x 533 A FIN Green 6,500 AC010593518
30 x 610 A CRS Brown 6,500 AC010594805
30 x 610 A MED Maroon 6,500 AC010594813
30 x 610 A FIN Green 6,500 AC010594821
90 x 400 A CRS Brown 6,500 AC019309932
90 x 400 A MED Maroon 6,500 AC019309940
90 x 400 A FIN Green 6,500 AC019309957
50 x 915 A CRS Brown 6,500 AC019309445
Linishing andFixed Machines
50 x 915 A MED Maroon 6,500 AC019309452
50 x 915 A FIN Green 6,500 AC019309460
50 x 1524 A CRS Brown 6,500 AC019309999
50 x 1524 A MED Maroon 6,500 AC019310005
50 x 1524 A FIN Green 6,500 AC019310013
100 x 1524 A CRS Brown 6,500 AC019309965
100 x 1524 A MED Maroon 6,500 AC019309973
100 x 1524 A FIN Green 6,500 AC019309981
NEW!
39BELT MachinEs | abrasive systems
Belt Machines
Scotch-Brite™ BeltsApplications:• Choose Scotch-Brite™ Surface Conditioning Belts for cleaning, finishing, blending and deburring applications.• Remove burrs without gouging or undercutting.
Features:• Trust genuine Scotch-Brite™ belts to deliver fantastic finishes.• Ideal way to add a great finish on the work piece.
Size (mm) Grade ColourMax Operating Speed (SFPM)
Order ID Recommended Tools
10 x 330 S SFN Grey 6,500 AN019251634
File and Portable Belts
12 x 457 SE A CRS Brown/Blue 6,500 AN019251592
25 x 610 SE A CRS Brown/Blue 6,500 AN019301991
25 x 610 S SFN Grey 6,500 AN019224532
25 x 610 Delicate White 6,500 AN019199858
30 x 533 SE A CRS Brown/Blue 6,500 AN019208519
50 x 915 A CRS Brown 6,500 AN019208519
Linishing andFixed Machines
50 x 915 A MED Maroon 6,500 AN019208857
50 x 915 A VFN Blue 6,500 AN019209426
50 x 915 S SFN Grey 6,500 AN019213402
50 x 1220 A CRS Brown 6,500 AN019214435
50 x 1220 A MED Maroon 6,500 AN019213733
50 x 1220 A VFN Blue 6,500 AN019175106
50 x 1220 S SFN Grey 6,500 AN019211216
50 x 1220 Delicate White 6,500 AN019199676
50 x 1520 A CRS Brown 6,500 AN019209913
50 x 1520 A MED Maroon 6,500 AN019208931
50 x 1520 A VFN Blue 6,500 AN019219367
50 x 1520 S SFN Grey 6,500 AN019300647
75 x 2000 A CRS Brown 6,500 AN019246238
75 x 2000 A MED Maroon 6,500 AN019208840
75 x 2000 A VFN Blue 6,500 AN019227741
75 x 2000 S SFN Grey 6,500 AN019236544
100 x 915 A CRS Brown 6,500 AN019208873
100 x 915 A MED Maroon 6,500 AN019208881
100 x 915 A VFN Blue 6,500 AN019210390
100 x 1520 SE A CRS Brown/Blue 6,500 61500163334
100 x 1520 A CRS Brown 6,500 AN019210663
100 x 1520 A MED Maroon 6,500 AN019209418
100 x 1520 A VFN Blue 6,500 AN019210671
100 x 2440 A CRS Brown 6,500 AN019211786
100 x 2440 A MED Maroon 6,500 AN019228426
ATTeNTiON: Belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3M sales specialist or 3M Authorised distributor.
40 DIE GRINDERS | Abrasive Systems
Die Grinders
Discs, Brushes & Wheels
for Die Grinders3M™ & Scotch-Brite™
Application Substrate
Scotch-Brite™ Clean and Strip Blen
ding
Debu
rrin
g
Fini
shin
g
Clea
ning
Coat
ing
Rem
oval
Polis
hing
Stai
nles
s St
eel
Alum
iniu
m
Carb
on S
teel
Cast
Iron
Tita
nium
Non-
Ferr
ous
(Bra
ss/B
ronz
e)
Best Scotch-Brite™ Clean and Strip Disc - For use on mandrel • • • • • • •
Better Scotch-Brite™ Clean and Strip Disc – Shaft mounted • • • • • • •
Good Scotch-Brite™ Roloc™+ Clean and Strip Disc • • • • • • •
Scotch-Brite™ Mops
Better Scotch-Brite™ Roloc™+ Cut and Polish Mop • • • • • •
Better Scotch-Brite™ High Strength Discs • • • • • • •
Scotch-Brite™ Unitised Discs
Best Scotch-Brite™ Roloc™+ Cut and Polish Unitised Wheel • • • • • •
Best Scotch-Brite™ Cut and Polish Unitised Wheel • • • • • •
Best Scotch-Brite™ EXL Unitised Wheel • • • • • • • • •
Scotch-Brite™ Brushes
Better Scotch-Brite™ Roloc™+ Combination Flap Brush • • • • • • •
Better Scotch-Brite™ Roloc™+ Cut and Polish Flap Brush • • • • • •
Better Scotch-Brite™ Roloc™+ Clean and Finish Flap Brush • • • • • • • • •
Scotch-Brite™ Bristle Products
Best Scotch-Brite™ Radial Bristle Discs • • • • • • •
Best Scotch-Brite™ Radial Bristle Brushes • • • • • • •
3M™ Roloc™+ Quick Release SystemRecommended grades by application3M™ roloc™+ system offers a broad range of 3M abrasives for
use on die grinders and other straight shaft tools. A simple twist off, twist on quick release system allows the operator to reduce the time it takes to change grades or products during the job.
The roloc+ holders each are fitted with a ¼” diameter steel reinforced shaft and secure mounting system that allows for safe use of the products on their edge. The roloc+ system can also be combined with either of the roloc+ retaining buttons so that small unitised wheels can be mounted onto die grinders.
Blending & Deburring
Finishing Polishing Cleaning
Combination Abrasives 80-100 120-220
Nonwoven Abrasives
A CRS A MED
A VFN S SFNA CRS A MED
Clean and Strip S XCRS
Unitised Wheels 5A FIN
Bristle Discs 50-80 120 50
41DIE GRINDERS | Abrasive Systems
Die Grinders
Scotch-Brite™ Clean and Strip DiscsApplications:• Aggressive, open-web disc for cleaning welds, removing rust and paint.• May be mounted on a straight die grinders or bench motor.
Features:• Load resistant.• Smear resistant.
Size (mm) Grade Colour TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
100 x 6 S XCS Black Flexible 6,000 AC010593575 Mandrel PN93361500060969 Die Grinder PN28332
60440236341100 x 6 S XCS Purple Rigid 6,000 AC010565086
150 x 12 S XCS Black Flexible 4,000 AC010593583 Mandrel PN934 61988809341150 x 12 S XCS Purple Rigid 4,000 AC010565078
Scotch-Brite™ Clean and Strip Discs (shaft Mounted)Applications:• Ideal for pre and post-weld cleaning where more flexibility is required.• Designed to remove rust, paint and coatings.
Features:• Offers long life and improved cut rate compared to the original black Clean and Strip.• Spindle mounted for easy fitting to a die grinder.
Size (mm) Grade Colour TypeMax Operating Speed (rpm)
Order ID Recommended Tools
75 x 13 x 6 S XCS Blue Flexible 10,000 FN510078085
Die Grinder PN20238 60440179467
75 x 25 x 6 S XCS Blue Flexible 10,000 FN510078853
100 x 13 x 6 S XCS Blue Flexible 8,000 FN510078366
100 x 25 x 6 S XCS Blue Flexible 8,000 FN510078267
150 x 13 x 8 S XCS Blue Flexible 6,000 FN510078705-
150 x 25 x 8 S XCS Blue Flexible 6,000 FN510078507
Scotch-Brite™ Roloc™+ Clean and Strip DiscApplications:• Aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds and other
difficult-to-reach areas.
Features:• 3 dimensional abrasive web conforms to work area.• Quick change Roloc™+ system reduces downtime and process costs.
Size (mm) Grade ColourMax Operating Speed (rpm)
Part Number Order ID Recommended Accessories Recommended Tools
100 x 12 S XCS Black 8,000 07466 61500090578Roloc+ Holder PN09986
FN510078564Die Grinder PN20240
60440179483
42 DIE GRINDERS | Abrasive Systems
Die Grinders
Scotch-Brite™ Roloc™+ Cut and Polish Flap BrushApplications:• Satin finishing and light deburring of larger components where the machine is taken to the part.• Suitable for metal fabrication and timber finishing applications.
Features:• Three dimensional Scotch-Brite™ web produces consistent, repeatable results without damaging
the work piece.• Open, flexible flap construction is soft and pliable to produce uniform surface finishes without
chatter marks.
Size (mm) Grade ColourMax Operating Speed (rpm)
Part Number Order ID Recommended Accessories Recommended Tools
50 x 25 A MED Brown 12,000 09700 FN510078713Roloc+ Holder PN09884
FN510078473Die Grinder PN20240
6044017948363 x 32 A MED Brown 9,000 09701 FN510078788
75 x 35 A MED Brown 8,000 09702 FN510078317
Scotch-Brite™ Roloc™+ Clean and Finish Flap BrushApplications:• Cleaning, light deburring or satin finishing on metal surfaces.• Smoothing wood prior to varnishing or primer denibbing before final coat.
Features:• Brushes are impregnated with abrasive mineral to give uniform cut and finish throughout
product life.• Open, flexible flap construction is soft and pliable to produce uniform surface finishes without
chatter marks.
Size (mm) Grade ColourMax Operating Speed (rpm)
Part Number Order ID Recommended Accessories Recommended Tools
63 x 32 A VFN Maroon 9,000 09705 FN510078580
Roloc+ Holder PN09884 FN510078473
Die Grinder PN20240 6044017948363 x 32 S FIN Grey 9,000 09708 FN510078242
75 x 35 A VFN Maroon 7,500 09706 FN510078481 Die Grinder PN28332 6044023634175 x 35 S FIN Grey 7,500 09709 FN510078390
Scotch-Brite™ Roloc™+ Combination Flap BrushApplications:• Blends defects and reduces scratch roughness in one step.• Blending scratches on stainless steel or fine finishing aluminium prior to anodising.
Features:• Combination of Scotch-Brite™ Clean & Finish material and coated abrasive gives greater scratch depth.• Quick change Roloc™+ system reduces downtime and process costs.
Size (mm) Grade ColourMax Operating Speed (rpm)
Part Number Order ID Recommended Accessories Recommended Tools
63 x 32 80 Maroon 9,000 09717 FN510078440Roloc+ Holder PN09884
FN510078473Die Grinder PN20240
6044017948363 x 32 120 Maroon 9,000 09720 FN510078341
63 x 32 180 Maroon 9,000 09723 FN510078929
43DIE GRINDERS | Abrasive Systems
Die Grinders
Scotch-Brite™ Roloc™+ Cut and Polish MopApplications:• Aggressive cutting action gives a tight scratch pattern and consistent, repeatable finish on metals
and timber.• Defuzzing of wood profiles and panels; removal of lacquer, paint, dirt and discolouration; matt or
satin finishing on metal surfaces.
Features:• Disc construction provides conformability where needed on irregular surfaces.• Five discs of heavy duty Scotch-Brite Web are fixed together to form a disc brush.
Size (mm) Grade ColourMax Operating Speed (rpm)
Part Number Order ID Recommended Accessories Recommended Tools
75 x 30 A MED Tan 7,500 09714 FN510078499Roloc+ Holder PN09884
FN510078473Die Grinder PN28332
60440236341
100 x 30 A MED Tan 6,000 09715 FN510078556Roloc+ Holder PN09986
FN510078564Die Grinder PN28332
60440236341
Scotch-Brite™ Roloc™+ Cut and Polish Unitised WheelApplications:• Aggressive product capable of removing surface imperfection and handling marks.• Often used to replace many conventional abrasive products such as rubber bonded wheels and
small set-up wheels.
Features:• Excellent starting point for jobs requiring the availability of small diameters and narrow widths.• Compressed, non-woven fibre construction gives uniform grain distribution which will produce
consistent results.
Size (mm) Grade ColourMax Operating Speed (rpm)
Part Number Order ID Recommended Accessories Recommended Tools
75 x 6 x 10 5A FIN Brown 15,000 09743 FN510080073Roloc+ Holder PN9991
61500072345Die Grinder PN20240
60440179483
Scotch-Brite™ Rapid Cut Unitized WheelApplications:• Use for aggressive deburriring and blending applications.• Excellent choice for stainless steel fabrication.
Features:• Utilises 3M patented Precision Shaped Grain technology.• Advanced technology delivers faster cuts rates and cooler operating temperatures.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
75 x 6 x 10 9C CRS+ Red/Purple 18,100 61500311347Roloc™+ Holder 1 & 7
61500072345Die Grinder #20238
60440179467
NEW!
44 DIE GRINDERS | Abrasive Systems
Die Grinders
Scotch-Brite™ Radial Bristle DiscsApplications:• Durable radial plastic disc for deburring or coating removal.• Fits portable hand tool or small bench motor.
Features:• Gang multiple discs to form a brush.• Angled bristles are more aggressive than curved.
Size (mm) Grade Colour TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
76 x 10 50 Green Angle 25,000 61500139391
Mandrel PN99061500073343
Die Grinder PN20238 60440179467
76 x 10 80 Yellow Angle 25,000 61500139409
76 x 10 120 White Angle 25,000 61500139417
76 x 10 80 Yellow Curve 20,000 61500176070
76 x 10 120 White Curve 20,000 61500176088
76 x 10 220 Red Curve 20,000 61500176096
Scotch-Brite™ EXL Unitised WheelApplications:• High performance and durability for deburring and finishing applications.• Excellent choice for deburring and polishing of all metal alloys as well as
many plastics and composites.
Features:• Resists smearing and minimises heat build-up on the work piece.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
50 x 3 x 4.7 8A CRS Tan/Orange 22,100 9116593
Mandrel PN933 61500060969
Die Grinder PN20238 60440179467
50 x 3 x 4.7 6A MED Tan/Red 22,100 61500079399
38 x 6 x 4.7 2S FIN Tan 30,100 JN390022166
Scotch-Brite™ Radial Bristle BrushApplications:• Works on a variety of coatings and is a safe alternative to wire brushes.• Angled and straight bristles are more aggressive than curved.
Features:• Abrasive mineral is molded into the plastic fingers and requires minimal pressure to produce results.• Each brush includes wheel bushes and one set of flanges.
Size (mm) Grade Colour TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
150 x 12 x 25 36 Brown Angle 6,000 61500151446
Mandrel PN934 61988809341
Die Grinder PN28332 60440236341
150 x 12 x 25 50 Green Angle 6,000 61500151461
150 x 12 x 25 80 Yellow Angle 6,000 61500151479
150 x 12 x 25 80 Yellow Curve 6,000 61500187770
150 x 12 x 25 120 White Curve 6,000 61500187747
45Fillet Weld Grinders | Abrasive systems
Fillet Weld Grinders
GrindersFillet Weld NEW!
Scotch-Brite™ EXL Unitized Wheel
Scotch-Brite™ Rapid Cut Unitized Wheel
Applications:• High performance and durability for deburring and finishing applications..• Excellent choice for deburring and polishing of all metal alloys as well as many plastics and composites.
Features:• A layered, durable unitized wheel construction.• Resist smearing and minimise heat build-up on the work piece.
Applications:• Use for aggressive deburring and blending applications.• Excellent choice for stainless steel fabrication.
Features:• Utilises 3M patented Precision Shaped Grain technology.• Advanced technology delivers faster cuts rates and cooler operating temperatures.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order IDRecommended
AccessoriesRecommended Tools
150 x 3 x 25 7C CRS+ Red/Green 7,500 AC010594847- Fillet Weld Grinders
150 x 6 x 25 7C CRS+ Red/Green 7,500 AC010594854
Size (mm) Grade ColourMax Operating Speed (rpm)
Order IDRecommended
AccessoriesRecommended Tools
150 x 3 x 25 8A CRS Grey/Red 7,500 AC010594862
- Fillet Weld Grinders
150 x 6 x 25 8A CRS Grey/Red 7,500 AC010594870
150 x 3 x 25 6A MED Grey/Red 7,500 AC010594888
150 x 6 x 25 6A MED Grey/Red 7,500 AC010594896
150 x 6 x 25 2S FIN Grey/Purple 5,000 61500128766
Blend welds faster than ever before
46 BENCH MOTORS | Abrasive Systems
Bench Motors
Application Substrate
Scotch-Brite™ Convolute Wheels Blen
ding
Debu
rrin
g
Fini
shin
g
Clea
ning
Coat
ing
Rem
oval
Polis
hing
Stai
nles
s St
eel
Alum
iniu
m
Carb
on S
teel
Cast
Iron
Tita
nium
Nick
el A
lloy
Non-
Ferr
ous
(Bra
ss/B
ronz
e)
Best Scotch-Brite™ EXL Deburring Wheels • • • • • • • • •
Better Scotch-Brite™ Light Deburring Wheels • • • • • • • • • •
Best Scotch-Brite™ Metal Finishing Wheels • • • • • • • • •
Better Scotch-Brite™ Multi Finishing Wheels • • • • • • • • •
Scotch-Brite™ Unitised Wheels
Good Scotch-Brite™ Multi-Purpose Unitised Wheel • • • • • • • • • •
Scotch-Brite™ Bristle Products
Best Scotch-Brite™ Radial Bristle Brushes • • • • • • • •
Scotch-Brite™ Clean and Strip
Best Scotch-Brite™ Clean and Strip Disc • • • • • • •
Scotch-Brite™ Mops
Better Scotch-Brite™ Lapping Mops • • • • • • • •
Better Scotch-Brite™ High Strength Discs • • • • • • • •
Discs & Wheels for Pedestal& Bench Motors
3M™ & Scotch-Brite™
Getting the most from your wheels
Selecting Convolute vs. Unitised Product Surface SpeedsThis choice will often be determined by the part configuration, wheel size availability, tool speed or other fixed circumstances
Convolute is a wrapped construction on a standard sized core and the “flat” of the web becomes the cutting tool. The wheels are one directional, which is indicated by an arrow on the side of the wheel and arrows printed in the core.
Unitised is a layered construction with a selection of centre hole sizes and no core. The “edge” of the web becomes the cutting tool. The wheels are non-directional.
Because product speed has a significant effect on performance (cut, life and finish), it is important to select the proper speed for a particular operation and work piece.
generally, low speeds are desired for generating very uniform satin finishes, for finishing aluminium alloys without lubricants and for use on composite or other soft material applications. High speeds are recommended when it is desired to remove or blend surface imperfections and tough burrs. This high speed will result in a faster cut along with finer finishes.
Finish Density
Convolute Finer Finish(grade for grade)
Softer and more conformable*
Unitised More aggressive and durable (grade for grade)
Harder and less conformable
Decorative Finishing 500-3,000 SFPM
Composites / Soft Materials 1,200-2,700 SFPM
Clenaing & Conditioning 2,000-5,000 SFPM
Oxide Removal 4,500-6,500 SFPM
Deburring 5,000-6.500 SFPM
Blending / Polishing 6,000-8,000 SFPM
Basic Performance DifferencesRecommended Operating Speeds (sFPM = surface Feet Per Minute)
* When comparing same density numbers
47BENCH MOTORS | Abrasive Systems
Bench Motors
Scotch-Brite™ EXL Deburring Wheel
Scotch-Brite™ Light Deburring Wheel
Scotch-Brite™ Metal Finishing Wheel
Applications:• High performance and durability for deburring and finishing applications.• Ideal for use on hard materials such as stainless steel, titanium and high nickel alloys.
Features:• Convolutely wound on a core to create a longer lasting wheel.• Unique resin system, which helps minimise smearing.
Applications:• Designed for deburring and finishing applications which require a highly polished finish.• Used for fine deburring, polishing and finishing because of their conformability.
Features:• Convolutely wound on a core to create a longer lasting wheel.• Able to maintain critical tolerances because of their conformability.
Applications:• Used effectively to blend and match #3 or #4 mill finishes on stainless steel.• On softer metals such as aluminium, copper and brass, they are used to blend out minor surface
imperfections and handling marks while providing the desired decorative finish.
Features:• Convolutely wound on a core to create a longer lasting wheel.• Highly conformable wheel that is designed to apply uniform and consistent satin/antique finishes.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
150 x 25 x 25 8A MED Grey 6,000 61500126588 Wheel Adaptor 0309948
Bench Motor
150 x 25 x 25 8S FIN Grey 6,000 JN310004013
200 x 25 x 75 8A MED Grey 4,500 61500126620 Flange PN35661988835544200 x 25 x 75 8S FIN Grey 4,500 JN310002603
305 x 100 x 125 8S FIN Grey 3,000 JN310001712 -
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
150 x 25 x 25 7S FIN Grey 6,000 61500126315Wheel Adaptor
0309948
Bench Motor150 x 50 x 25 7S FIN Grey 6,000 JN210016034
Wheel AdaptorAC010596099
200 x 25 x 75 7S FIN Grey 4,500 JN390061198-
300 x 50 x 125 7S FIN Grey 3,000 JN390061214
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
150 x 50 x 25 6A MED Maroon 6,000 61500037918Wheel AdaptorAC010596099
Bench Motor150 x 50 x 25 7S FIN Maroon 6,000 61500037876
200 x 50 x 75 6A MED Maroon 4,500 61500038023Flange PN35661988835544
200 x 50 x 75 4A MED Maroon 4,500 61500109550
48 BENCH MOTORS | Abrasive Systems
Bench Motors
Scotch-Brite™ Multi-Finishing WheelApplications:• Used to create uniform and attractive final finishes on ferrous and non-ferrous metals.• Tough enough to finish edges and welds and soft enough to apply a final finish on large surfaces.
Features:• The load resistant open web construction of these wheels removes surface contamination and dirt without
re-depositing contaminates onto the work piece.• Silicon Carbide mineral can create a unique bright surface that is often desired by stainless steel fabricators.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
150 x 50 x 25 4S CRS Black 6,000 61500132867
Wheel AdaptorAC010596099
Bench Motorsor
Barrel Grinder
150 x 50 x 25 4S MED Grey 6,000 61500162914
150 x 50 x 25 2S CRS Black 6,000 61500051646
150 x 50 x 25 2S MED Grey 6,000 61500051653
150 x 50 x 25 2S FIN Grey 6,000 61500051661
Scotch-Brite™ Multi-Purpose Unitised WheelApplications:• Good performing, debburing and finishing wheel for light duty applications.• Clean up of threaded parts or welded areas.
Features:• Conformable unitised construction.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Tools
150 x 25 x 14 8S FIN Grey 7,500 XN002138131Bench Motors
200 x 25 x 14 4S MED Grey 5,500 XN002138651
Scotch-Brite™ Radial Bristle BrushApplications:• Works on a variety of coatings and is a safe alternative to wire brushes.• Angled and straight bristles are more aggressive than curved.
Features:• Abrasive mineral is molded into the plastic fingers and requires minimal pressure to produce results.• Each brush includes wheel bushes and one set of flanges.
Size (mm) Grade Colour TypeMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
150 x 12 x 25 36 Brown Angle 6,000 61500151446
Comes with multi-bore adaptor
Bench Motors
150 x 12 x 25 50 Green Angle 6,000 61500151461
150 x 12 x 25 80 Yellow Angle 6,000 61500151479
150 x 12 x 25 80 Yellow Curve 6,000 61500187770
150 x 12 x 25 120 White Curve 6,000 61500187747
203 x 25 x 32 50 Green Straight 6,000 61500189446
203 x 25 x 32 80 Yellow Straight 6,000 61500189453
203 x 25 x 32 120 White Straight 6,000 61500189461
194 x 25 x 32 120 White Curve 6,000 61500190212
194 x 25 x 32 220 Red Curve 6,000 61500189479
49BENCH MOTORS | Abrasive Systems
Bench Motors
Scotch-Brite™ Clean and Strip DiscsApplications:• Aggressive, open-web disc for cleaning welds, removing rust and paint.• May be mounted on a straight die grinders or bench motor.
Features:• Load resistant.• Smear resistant.
Size (mm) Grade Colour TypeMax Operating Speed (rpm)
Order ID Recommended Tools
178 x 20 S XCS Black Flexible 3,300 AC010593146Bench Motors
178 x 20 S XCS Purple Rigid 3,300 AN000417467
Scotch-Brite™ High Strength DiscApplications:• Excellent to deburr, denib or defuzz timber and metal surfaces.• Create satin finishes on metal.
Features:• May be used individually or stacked on straight shaft tool or bench motor. • High strength material is better in edge applications than clean and finish.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Tools
150 x 12 A MED Maroon 4,000 61500137767
Bench Motors150 x 12 A VFN Maroon 4,000 61500137700
200 x 12 A MED Maroon 3,000 61500137809
200 x 12 A VFN Maroon 3,000 61500137726
Scotch-Brite™ High Strength MopApplications:• Designed for defuzzing of timber and general purpose cleaning of metals.• Create satin finishes on metals.
Features:• Uses Scotch-Brite™ High Strength discs to create a flexible conformable wheel.• Multiple discs are mounted together on nylon washers for easy mounting to tapered spindles.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
150 x 10 A MED Maroon 4,500 AC010593336
Tapered Spindle Bench Motors150 x 10 A VFN Maroon 4,500 AC010594664
200 x 10 A MED Maroon 3,500 AC010592866
200 x 10 A VFN Maroon 3,500 AC010593328
50 small DIsC saNDERs | abrasive systems
Small Disc Sanders
3M™ Disc Sanders• 3M got the right angle “right” on this
new disc sander for metalworking. A 97 degree head angle allows for more comfortable wrist position and improved ergonomics.
• 3M™ greptile™ gripping technology provides a secure grip with less effort and is easy to maneuver. And the adjustable directional exhaust feature works the way you want it to.
Short – “Direct Mount” backup pad attachmentshorter distance to the work piece generates less vibration and allows for better operator control.
Tall – ¼” collet optionAllows for longer reach and mounting of other abrasives and ¼” accessories.
3M™ Roloc™ Disc or Wheel
3M™ Roloc™ Disc Pad
Optional 1/4” Collet(assembly included with tool)
1/4” x 1/4” - 20Threaded ShaftPN45102
3M™ Roloc™ Disc or Wheel
3M™ Roloc™ Disc Pad
Roloc™ Products for Disc Sanders3M™ & Scotch-Brite™
Application Substrate
3M™ Roloc™ Discs Grin
ding
Ligh
t Grin
ding
Blen
ding
Debu
rrin
g
Ligh
t Deb
urrin
g
Fini
shin
g
Clea
ning
Stai
nles
s St
eel
Alum
iniu
m
Carb
on S
teel
Cast
Iron
Tita
nium
Nick
el A
lloy
Non-
Ferr
ous
(Bra
ss/B
ronz
e)
Best 3M™ Roloc™ Cubitron™ II Durable Edge Disc 984F • • • • • • • • •
Better 3M™ Roloc™ Fibre Disc 983C • • • • • •
Better 3M™ Roloc™ Disc 777F • • • • • • • •
Good 3M™ Roloc™ Disc 361F • • • • • • • • • •
Scotch-Brite™ Roloc™ Discs
Best Scotch-Brite™ Roloc™ Rapid Cut Unitised Discs • • • • • • •
BestScotch-Brite™ Roloc™ Light Grinding and Blending Discs
• • • • • • • •
Best Scotch-Brite™ Roloc™ Surface Conditioning Discs • • • • • • • • • • • •
Best Scotch-Brite™ Roloc™ Bristle Discs • • • • • •
Best Scotch-Brite™ Roloc™ EXL Unitised Wheels • • • • • • • • • •
Better Scotch-Brite™ Roloc™ Coating Removal Discs • • • • • • •
Best Scotch-Brite™ Roloc™ Clean and Strip XT Discs • • • • • • •
51small DIsC saNDERs | abrasive systems
Small Disc Sanders
3M™ Cubitron™ II Roloc™ Durable Edge Disc 984F
3M™ Roloc™ Fibre Disc 983C
3M™ Roloc™ Disc 777F
Applications:• Designed for top performance in heavy duty grinding applications.• Suitable for all metals.
Features:• Contains grinding aid for cooler grinding.• A premium 3M™ Ceramic grain Roloc™ disc constructed on a YF weight, water resistant
polyester cloth backing with a laminated cloth for added durability.
Applications:• Durable for heavy duty welding fabrication applications.• Excellent performance on hard metals such as stainless steel.
Features:• Features long life and fast cutting mineral.• A premium 3M™ Ceramic grain Roloc™ disc constructed on a fibre backing.
Applications:• Recommended for off hand grinding applications in metal fabrication.• Good performance on stainless steel and hard metals.
Features:• Resin bonded and contains grinding aid for improved heat resistance.• A 3M™ Ceramic grain Roloc™ disc constructed on a YF-weight, water resistant polyester cloth backing.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
50 36+ Brown 25,000 60440230138
Back Up Pad PN45096 60980026961
Disc Sander PN20231 60440179392
50 60+ Brown 25,000 60440230211
50 80+ Brown 25,000 60440230294
75 36+ Brown 20,000 60440230146
Back Up Pad PN45091 60440237778
Disc Sander PN20232 60440179400
75 60+ Brown 20,000 60440230229
75 80+ Brown 20,000 60440230302
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
50 60 Brown 25,000 60440207110Back Up Pad PN45096
60980026961Disc Sander PN20231
6044017939250 80 Brown 25,000 60440207177
75 36 Brown 20,000 60440206963
Back Up Pad PN45091 60440237778
Disc Sander PN20232 60440179400
75 50 Brown 20,000 60440207060
75 60 Brown 20,000 60440207102
75 80 Brown 20,000 60440207169
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
75 36 Orange 20,000 60650017654
Back Up Pad PN45091 60440237778
Disc Sander PN20232 60440179400
75 50 Orange 20,000 60650017662
75 60 Orange 20,000 60650017696
75 80 Orange 20,000 60650017704
75 120 Orange 20,000 60650018058
52 small DIsC saNDERs | abrasive systems
Small Disc Sanders
3M™ Roloc™ Disc 361F
Scotch-Brite™ Roloc™ Light Grinding and Blending Disc
Scotch-Brite™ Roloc™ SE Surface Conditioning Disc
Applications:• General purpose grinding and finishing in metal fabrication.• Finer grades can be used for rough sanding in woodworking.
Features:• Resin bonded for heat resistance.• An Aluminium Oxide Roloc™ disc constructed on a YF weight, water resistant polyester cloth backing.
Applications:• Tough enough to perform light grinding and blending of metals.• Fantastic for metal fabrication of smaller parts including switch boxes and stainless steel furniture.
Features:• Roloc attachment systems allows for quick changes of grades and products for completing the job faster.• Durable non woven technology with strong edge wear resistance.
Applications:• A coarse, tough, aggressive non-woven disc for heavy duty deburring and finishing.• Used in metal fabrication when standard coarse surface conditioning discs are not aggressive enough.
Features:• Roloc attachment systems allows for quick changes of grades and products for completing the job faster.• Durable non woven technology with strong edge wear resistance.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
50 36 Brown 25,000 60440208936
Back Up Pad PN45095 60440237653
Disc Sander PN20231 60440179392
50 50 Brown 25,000 60440209017
50 80 Brown 25,000 60440209140
50 120 Brown 25,000 60440209298
75 24 Brown 20,000 60440208902
Back Up Pad PN45092 60440237661
Disc Sander PN20232 60440179400
75 36 Brown 20,000 60440208944
75 50 Brown 20,000 60440209025
75 80 Brown 20,000 60440209157
75 120 Brown 20,000 60440209306
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
50 Super Duty Blue 25,000 61500292679Back Up Pad PN45095
60440237653Disc Sander PN20231
6044017939250 Heavy Duty Maroon 25,000 61500292661
75 Super Duty Blue 20,000 61500292695Back Up Pad PN45092
60440237661Disc Sander PN20232
6044017940075 Heavy Duty Maroon 20,000 61500292687
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
75 SE A CRS Brown/Blue 20,000 61500141835Back Up Pad PN45095
60440237653Disc Sander PN20231
60440179392
53small DIsC saNDERs | abrasive systems
Small Disc Sanders
Scotch-Brite™ Roloc™ Surface Conditioning Disc
Scotch-Brite™ Roloc™ EXL Unitised Wheel
Scotch-Brite™ Roloc™ Rapid Cut Unitized Wheel
Applications:• Industry leader for surface conditioning applications including cleaning, finishing, blending and deburring applications.
Features:• Tough, aggressive non-woven material that leaves the surface with an ideal finish.• Roloc attachment systems allows for quick changes of grades and products for completing the job faster.
Applications:• High performance and durability for deburring and finishing applications.• Soft, conformable and flexible.
Features:• A threaded attachment system secures the wheel to the holder.• Minimal heat build up.
Applications:• Use for aggressive deburring and blending applications.• Excellent choice for stainless steel fabrication.
Features:• Utilises 3M patented Precision Shaped Grain technology.• Advanced technology delivers faster cuts rates and cooler operating temperatures.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
50 A CRS Brown 25,000 61500141736
Back Up Pad PN4509560440237653
Disc Sander PN20231 60440179392
50 A MED Maroon 25,000 61500141728
50 A VFN Blue 25,000 61500141710
50 S SFN Grey 25,000 61500141744
75 A CRS Brown 20,000 61500141801
Back Up Pad PN45092 60440237661
Disc Sander PN20232 60440179400
75 A MED Maroon 20,000 61500141793
75 A VFN Blue 20,000 61500141785
75 S SFN Grey 20,000 61500141819
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
75 8A CRS Tan 15,100 61500099322
Back Up Pad PN45092 60440237661
Disc Sander PN20232 60440179400
75 6A MED Tan 15,100 61500099280
75 2A MED Grey 15,100 61500099249
75 2S FIN Grey 15,100 61500099223
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
75 9C CRS+ Red/Purple 15,100 61500299310Back Up Pad PN45092
60440237661Disc Sander PN20232
60440179400
NEW!
54 small DIsC saNDERs | abrasive systems
Small Disc Sanders
Scotch-Brite™ Roloc™ Bristle DiscApplications:• Use for blending, finishing, cleaning and for coating, defect, scratch and rust removal on all metals.• Excellent replacement for wire brushes.
Features:• Each disc is a molded bristle which is filled with small abrasive mineral particles.• Bristle discs will flare out when running, allowing the edge to reach into corners and joins easily.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
50 50 Green 25,000 61500135423
Back Up Pad PN4509560440237653
Disc Sander PN202316044017939250 80 Yellow 25,000 61500132172
50 120 White 25,000 61500132180
75 50 Green 15,000 61500132198
Back Up Pad PN45092 60440237661
Disc Sander PN20232 60440179400
75 80 Yellow 15,000 61500132214
75 120 White 15,000 61500132222
Scotch-Brite™ Roloc™ Clean and Strip XT DiscApplications:• Aggressive, open-web disc for cleaning welds, removing rust and paint.• Excellent for preparing surfaces for weld repairs.
Features:• Durable, rigid and long lasting.• Load and smear resistant.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
50 S XCS Purple 18,000 61500176419Back Up Pad PN45095
60440237653 Disc Sander PN20231 60440179392
75 S XCS Purple 15,000 61500153509Back Up Pad PN45092
60440237661
Scotch-Brite™ Roloc™ Coating Removal DiscApplications:• Aggressive, open-web disc for cleaning welds, removing rust and paint.• Excellent for preparing surfaces for weld repairs.
Features:• Less aggressive and more flexible that the XT Purple Clean and Strip.• Load and smear resistant.
Size (mm) Grade ColourMax Operating Speed (rpm)
Order ID Recommended Accessories Recommended Tools
50 S XCRS Black 18,000 61500119484Back Up Pad
PN4509560440237653
Disc Sander PN2023160440179392
75 S XCRS Black 15,000 61500119344Back Up Pad PN45092
60440237661Disc Sander PN20232
60440179400
55buffing machines | abrasive systems
Products for Buffing Machines3M™ Perfect-it™
3M™ Perfect-it™ Compounds & Polishes
Looking for the perfect finish?
• specially designed compounds and polishes for use on aftermarket paint system to refine the final finish.
The quality of your paint finish is dependant on so many variables, the 3M™ Perfect-it™ Paint Finishing system is designed for today’s paint. Now more than ever, your paint finish is affected by the changes to the paint industry, whether high solid or low VOC paint, this system will increase the quality of your finish. is your paint finishing system designed for today’s paint?
This five step process starts with 3M™ Trizact discs working through the Perfect-it™ compound and polish range finishing with the all new silicone free Perfect-it™ Clean and shine to leave a high gloss shine. The standardised system is a five step process that can reduce time and costs increasing productivity.
3M’s customers are achieving great results already with this system.
Suitable for the following industries:
• Automotive
• Aerospace
• Commercial vehicle
• Furniture Manufacturing
• industrial
• Composite and Fiberglass
56 buffing machines | abrasive systems
Buffing Machines
3M™ Perfect-It™ Compounds
3M™ Perfect-It™ Polishes
3M™ Perfect-It™ Clean and Shine
Applications:• Unique formula quickly removes P1200 grade and finer sand scratches and other surface defects.
Features:• Buffs to high gloss with a minimum of swirl marks.• The Perfect-It brand means this is 3M’s highest performing rubbing compound.
Applications:• Quickly and effectively removes compound swirl marks and produces an outstanding finish. • Unique formula eliminates swirl marks and produces a high gloss finish, even on the most difficult dark coloured vehicles.
Features:• Good handling, easy cleanup.• The Perfect-It brand means this is 3M`s highest performing machine polish.
Applications:• Spray detailer that cleans up compound and polish residue.
Features:• Provides a high gloss shine. • Paint shop safe. No silicones.
Size (mm) Part Number Colour Product Type Order ID Recommended Accessories Recommended Tools
946ml 05936 WhiteExtra Cut Rubbing
CompoundCompound AS010558281 Wool Pad PN05719
60455054563Foam Pad PN05737
60455036123
Polishing Machines946ml 06085 White Rubbing Compound Compound 60455071179
Size (mm) Part Number Colour Product Type Order ID Recommended Accessories Recommended Tools
946ml 06064 White Machine Polish Polish 60455034904Foam Pad PN05738
60455065726Polishing Machines
946ml 06068 White Ultrafine Machine Polish 60455034938Foam Pad PN05733
604550657831
Size (mm) Part Number Colour Product Type Order ID Recommended Accessories Recommended Tools
473ml 06084 Clear Clean and Shine Cleaner 604550348473M™ Perfect-It™
Detailing Cloth 70071407731
-
573M™ Air TOOLS | Abrasive Systems
3M™ Air PoweredTools
Technical Recommendations for 3M™ Air-Powered Tools
WarrantyAppropriate Air-lines:• use a clean, dry, lubricated air supply that will give a measured air pressure at the tool of
6.2 bar (90 psig) when the tool is running with the lever fully depressed. Note: Tools can be run at lower pressures, but should never be run higher than 6.2 bar (90 psig). if run at a lower pressure, the performance of the tool is reduced.
• use an approved 10mm (3/8”) or 13mm x 8m (1/2” x 25’) maximum length air line.• Connect the tool to the air supply.• it is strongly recommended that an air filter, regulator and lubricator (FrL) be used to
supply clean, lubricated air at the correct pressure to the tool. if such equipment is not used, the tool should be manually lubricated.
To manually lubricate the tool:• disconnect the air line and put 2 to 3 drops of suitable pneumatic motor lubricating oil,
such as 3M™ Air Tool Lubricant 20451, into the hose end (inlet) of the tool.• reconnect tool to the air supply and run tool for a few seconds to allow air to circulate
the oil.• Lubricate daily if the tool is used frequently or if the tool starts to slow or lose power.
3M’s range of air powered tools are covered by a 12 month warranty on manufacturing defaults.
The warranty covers manufacturing defects under normal use only. The warranty does not cover normal wear and tear, improper use or abuse and overloading. Please note that all warranty claims are subject to manufacturer’s approval. Be sure to keep your sales receipt and warranty cards in a safe place. These must be submitted when filing a warranty claim. Warranty repairs must be performed by an authorised 3M service Centre and can be contacted on 1300 651 817.
This warranty is provided in addition to other rights and remedies you have under law: Our goods come with guarantees which cannot be excluded under the Australian Consumer Law. you are entitled to replacement or refund for a major failure and to compensation for other reasonably foreseeable loss or damage. you are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Spare Partsspare Parts are available for 3M Air Powered Tools and are listed in the user manual of each tool. To purchase spare parts please contact our 3M service Centre on:1300 651 817.
Recommended Minimal Air Line Diameter• 10mm: 3/8” • 13mm: 1/2”
Recommended Maximum Hose Length• 8m: 25’
Recommended Maximum Working Air Pressure• 6.2 bar (90 psig)
For warranty and repair service, call 1300 651 817
Warranty registration can now be made online
www.3M.com.au/Toolregistration
58 3M™ TeCHNOLOgy | Abrasive systems
neW! the 3M™ elite Series Sanders
An internal muffler, now also on Self-Generated Vacuum models, decreases noise as much as
6 dB. Mufflers have also been relocated internally, so they won’t easily break off.
improved dust collection port –
wider port for improved dust collection.
improved angle on dust housing allows easier access to air fitting.
rugged Durability. enhanced Comfort. proven performance. get it all.3M took our best line of air-powered random Orbital sanders and then made it better.
Composite cover with exclusive
3M™ gripping Material extends to
base to absorb and reduce vibration.
The aluminum body reduces
downtime, and keeps tools in service by
preventing cracked housings.
The wrist rest is extended and
curved for more wrist support.
Lever is recessed, so no pinch points.
3M™ Technology
3M™ elite random orbital Sanders
3M’s most innovative improvements for
operations that are tough on tools through
constant usage. The durability and
operator ergonomics of 3M’s Elite line of
air tools will blow you away.
Built to last
• durable composite cover reduces
cracked housings and downtime
• sturdy, lightweight aluminium body
• No breakage of internally located muffler
• speed control positioned to eliminate
inadvertent adjustment
Designed for maximum operator comfort
• ergonomically enhanced for less
vibration, quiet operation, more wrist
support and overall operator comfort
• Lever is recessed, so no pinch points
• extended-to-base grip for improved
tactile feel and reduced vibration
Premier comfort combined with long-lasting performance
NEW!
593M™ Air TOOLS | Abrasive Systems
3M™ Air Tools
3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum SystemsFeatures:• Supplied ready with swivel hose adaptor to attach to any central vacuum system for efficient evacuation of dust and debris.• Impressive power-to-weight ratio.• Improved ergonomically designed for improved operator comfort with different grip sizes for better control.• Precision balanced back-up pad helps reduce vibration for smoother running.• 1 each of the following included: 3M™ Clean Sanding Filter Bag, Filter Bag Adapter, Hose Seal.• For optimum performance tool should be run at 90psi.
Product Number Tool Dia. Orbit Size Vacuum Type Motor Airflow Rate Maximum RPM Pad Included Order ID
28496 75mm 2.5 Non-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20348 XA100001313
28494 75mm 5 Non-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20348 60440238115
28498 125mm 2.5 Non-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20351 60440238156
28497 125mm 5 Non-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20351 60440238149
28495 125mm 8 Non-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20351 60440238123
28501 150mm 2.5 Non-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20354 60440238180
28460 150mm 5 Non-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20355 XA100001396
28499 150mm 8 Non-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20356 60440238164
28527 70mm x 198mm 3.2mm Non-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 10,000 28531 60440238446
3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating VacuumFeatures:• Supplied with a self-contained dust collection system to effectively trap and contain airborne particles.• Can also be attached to a central vacuum system.• Impressive power-to-weight ratio.• Improved ergonomically designed for improved operator comfort with different grip sizes for better control.• Precision balanced back-up pad helps reduce vibration for smoother running.• 1 each of the following included: 3M™ Clean Sanding Filter Bag, Filter Bag Adapter, Hose Seal.• For optimum performance tool should be run at 90psi.
Product Number Tool Dia. Orbit Size Vacuum Type Motor Airflow Rate Maximum RPM Pad Included Order ID
28513 75mm 2.5 Self-Generating Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20350 XA100001321
28511 75mm 5 Self-Generating Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20350 60440238289
28515 125mm 2.5 Self-Generating Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20353 60440238321
28514 125mm 5 Self-Generating Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20353 60440238313
28512 125mm 8 Self-Generating Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20353 60440238297
28517 150mm 2.5 Self-Generating Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20356 60440238347
28462 150mm 5 Self-Generating Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20465 XA100001412
28510 150mm 8 Self-Generating Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20356 60440238271
28529 70mm x 198mm 3.2mm Self-Generating Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 10,000 28531 60440238479
3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum SystemsFeatures:• Supplied with a self-contained dust collection system to effectively trap and contain airborne particles.• Can also be attached to a central vacuum system.• Impressive power-to-weight ratio.• Improved ergonomically designed for improved operator comfort with different grip sizes for better control.• Precision balanced back-up pad helps reduce vibration for smoother running.• 1 each of the following included: 3M™ Clean Sanding Filter Bag, Filter Bag Adapter, Hose Seal.• For optimum performance tool should be run at 90psi.
Product Number Tool Dia. Orbit Size Vacuum Type Motor Airflow Rate Maximum RPM Pad Included Order ID
28505 75mm 2.5 Centrel-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20350 60440238222
28503 75mm 5 Centrel-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20350 60440238206
28507 125mm 2.5 Centrel-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20353 60440238248
28506 125mm 5 Centrel-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20353 60440238230
28504 125mm 8 Centrel-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20353 60440238214
28509 150mm 2.5 Centrel-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20356 60440238263
28461 150mm 5 Centrel-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20465 XA100001404
28502 150mm 8 Centrel-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 12,000 20356 60440238198
28528 70mm x 198mm 3.2mm Centrel-Vacuum .28 HP (209 W) 17 SCFM ( 481 LPM) 10,000 28531 60440238453
60 3M™ Air TOOLS | Abrasive Systems
3M™ Air Tools
3M™ Orbital SanderFeatures:• Ideal for flat surface finishing, sealer sanding and working in tight corners.• Can be used with 3M™ Flexible Abrasive Hookit™ Hand Sheet.• 3M™ Hookit™ Pad included.• For optimum performance tool should be run at 90psi.
Part Number Tool Dia. Vacuum Type Motor HP (W) Airflow Rate Maximum RPM Weight kg (lbs) Order ID
20331 75mm x 100mm Non-Vac 0.24 HP (179 W) 17 SCFM (481 LPM) 10,000 1.43 (0.65) XN004216117
3M™ Air Powered Disc SandersFeatures:• The lightweight, compact design generates less vibration, while improving operator control.• Direct mount for use with 3M™ Roloc™ Backup Pads without using a collet.• Head angle on the 3M sander is 97º instead of from 90º to provide a more comfortable wrist
position and improve operating ergonomics.• 3M™ Greptile™ Gripping Technology provides a secure grip with less effort that is easy to
manoeuvre.• The adjustable directional exhaust feature allows airflow to be directed in a preferred direction.• For optimum performance tool should be run at 90psi.
Part Number Tool Dia. Motor HP (W) Maximum RPM Weight kg (lbs) Order ID
20231 50mm .5 (372) 20,000 0.58 (1.28) 60440179392
20232 75mm 1 (744) 15,000 1.97 (.89) 60440179400
3M™ Air Powered Die GrindersFeatures:• Designed to efficiently handle all your cylindrical polishing, buffing, shaping and deburring needs.• An offset gearbox with double ball bearings increase torque delivering superior performance.• Built-in comfort innovations include 3M™ Greptile™ Gripping Technology to help reduce vibration
for a more secure grip.• The adjustable directional exhaust feature allows airflow to be directed in a preferred direction.• Safety lever throttle to avoid accidental starting.• Ideal for heavy-duty applications.• For optimum performance tool should be run at 90psi.
Part Number Tool Dia. Motor HP (W) Maximum RPM Weight kg (lbs) Order ID
20237 1/4” Collet 1 (744) 20,000 0.77 (1.69) 60440179459
20238 1/4” Collet 1 (744) 18,000 0.77 (1.69) 60440179467
20340 1/4” Collet 1 (744) 8,000 0.93 (2.06) 60440179483
28332 1/4” Collet .5 (372) 4,000 0.72 (1.58) 60440236341
3M™ Air Powered Cut-Off Wheel ToolsFeatures:• Cutting tube, pipe, rebar, or sheets, 3M™ Cut-Off Wheel Tools can deliver fast, smooth
performance.• 1 HP tools, combined with 3M™ Cut-Off Wheels have the power you need to cut through carbon
steel, stainless steel and other materials.• Designed for easy handling.• 3M™ Gripping material for greater operator comfort.• For optimum performance tool should be run at 90psi.
Part Number Tool Dia. Motor HP (W) Maximum RPM Weight kg (lbs) Order ID
20233 75mm 1 (744) 25,000 0.95 (2.09) 60440179418
20234 100mm 1 (744) 20,000 1.02 (2.25) 60440179426
NEW!
613M™ Air TOOLS | Abrasive Systems
3M™ Air Tools
3M™ Air-Powered File Belt SandersFeatures:• 0.6 hp High-torque, 22,000rpm motor delivers the power needed by the operator to maintain speed under pressure without stalling the belt.• Large assortment of attachment arms .• 3M attachment arms are compatible with other tools + competitive arms can be used on the 3M tool.• Great solution for leveling, blending, finishing – especially inside right-angle welds.
Product Number Motor Maximum RPMBelt Speed
SFPM (SMM)Weight (kg) Length (mm) Height (mm) Width (mm) Order ID
28366 0.6HP 22,000 4990 (1521) 1.3 370 74.5 151.2 60440236689
28367 Kit includes Moulded Case, File Belt sander (PN28366) and 2 Arm Attahcments (PN28368 & 28370) 60440236697
Part NumberFor use with Belt Sander
Description Order ID
28368 12mm x 457mmStandard Style: Standard arm included with 3M File Belt Sander (PN28366).Sand with Contact wheel or platen
60440236705
28369 12mm x 457mmThin Style: Thinner thank standard arm.Sand with contact wheel or platen.
60440236713
283703mm x 457mm6mm x457mm
12mm x 457mm
Corners Style: Sand corners and grooves with contact wheel. Accommodates three belt widths. (Radius Wheel)
60440236721
2837116mm x 457mm19mm x 457mm
Thick Standard Style: Thicker than standard arm. Sand with contact wheel or platen. Accommodates two belt widths.
60440236739
283723mm x 457mm6mm x 457mm
Corners Style: Sand corners and grooves with contact wheel.Accommodates two belt widths. (V Wheel)
60440236747
2837316mm x 520mm19mm x 520mm
20-1/2” Arm: Sand with contact wheel or platen. Accommodates two belt widths. 60440236754
28374 12mm x 457mmCurved Arm: Unique curved arm used for blending flat areas. Sand with contact wheel or platen.
60440236762
283756mm x 457mm12mm x 457mm
Vessel Arm: Unique large arm used for blending weld seams. Sand with 4” contact wheel. Includes tracking/control knob. Accommodates two belt widths.
60440236770
3M File Belt Sander Attachment Arms
62 3M™ Air TOOLS | Abrasive Systems
3M™ Air Tools
3M™ Air Tool Lubricant
3M™ Air Tool Accessories
3M™ Filtrete™ Filter Bag
3M™ Filter Bag Adaptor
Features:• Used to keep pneumatic air tools running efficiently.• Use 2-3 drops at the end of each day, or as needed, to maintain tool performance.
Features:• For use with 3M self-generating vacuum tools.
Features:• For use with 3M Filtrete bags.
Part Number Size Order ID
20451 188ml 60440128282
Part Number Size Order ID
20452 N/A 60440236283
Part Number Size Order ID
20453 N/A 60440128308
633M™ Accessories | Abrasive systems
Accessories for 3M™
AbrasivesAngle Grinders
Random Orbital Sanders
Hand Sanding
Die Grinders
Bench Motors
Small Disc Sanders
Buffing Machines
3M™ Fibre disc Back up Pads3M™ retainer Nut3M™ Hook & Loop disc Pads and Holders
3M™ Hookit™ disc Pads and Holders3M™ Hookit™ interface Pads3M™ stikit™ disc Pads and Holders
3M™ Hookit™ Hand Blocks & Fairing Boards3M™ stikit™ Hand Pads3M™ Hand Blocks & Hand Pads
3M™ Perfect-it™ Pads3M™ superbuff™ Pads3M™ Hookit™ Back up Pads & Adaptors
3M™ roloc™+ Accessories3M™ Mandrels
3M™ Wheel Flanges3M™ Wheel Adaptors
3M™ roloc™ disc Pads and Holders3M™ roloc™ shafts
Page 58
Page 58-59
Page 60
Page 62
Page 61
Page 61
Page 62
64 3M™ Accessories | Abrasive systems
3M™ Accessories
3M™ High Pressure Fibre Disc Back Up Pads3M Ribbed Back-Up Pads have a unique optimised rib pattern and is resistant to temperaturesover 100 degrees. Used in conjunction with with 3M Cubitron™ II Fibre Discs this solution offersimproved disc life and cut rate resulting in lower cost and higher throughput for the customer.
64860 64861 64862 0066
09583 09584 09921 0066
3M™ Fibre Disc Back Up Pads & Extended Retaining Nut3M high performance back up pads come with both metric and imperial threaded retaining systems. An extended retaining nut should be used in conjunction with Scotch-Brite™ Clean and Strip Discs being mounted to metric threaded tools.
Part Number Description DiameterCentre Hole Diameter
Thread Size Colour Density Rating Max RPM Order ID
07312 Flat Face 100mm 16mm M10-1.5 INT Black Hard 15,200 XC003410104
09583 Flat Face 115mm 22mm M14-2.0 INT or 5/8-11 INT Black Hard 13,200 XC003410039
09584 Ribbed Face 125mm 22mm M14-2.0 INT or 5/8-11 INT Black Hard 12,000 XC003410047
09921 Ribbed Face 180mm 22mm M14-2.0 INT or 5/8-11 INT Black Hard 8,500 DC272921404
0066 Extended Retaining Nut - - M14-2.0 INT - - - AC010594029
Part Number Description DiameterCentre Hole Diameter
Thread Size Colour Density Rating Max RPM Order ID
64861 Ribbed Face 125mm 22mm M14-2.0INT or 5/8-11 INT Red Extra Hard 12,000 DE272923777
64862 Ribbed Face 180mm 22mm M14-2.0INT or 5/8-11 INT Red Extra Hard 8,500 DE272923785
0066 Extended Retaining Nut - - M14-2.0 INT - - - AC010594029
3M™ Hook & Loop Disc Pads and HoldersUse with hook and loop discs. Allows the disc to be run on right angle grinders and random orbital sanders.
Part Number Description Diameter Pin Diameter Thread Size Colour Face Colour Density Rating Hook Type Max RPM Order ID
923 Contact Pad 75mm - 1/4” Shank Black Black Firm 5 20,000 61500013174
914 Contact Pad 101mm - M10-1.5 INT Black Black Firm 7 13,000 AC010427329
61677 Centre Pin 100mm 16mm M10-1.5 INT Black Black Firm 7 13,000 GN030104493
9145 Contact Pad 114mm - M14-2.0 INT Black Black Firm 7 13,000 0350330
61680 Centre Pin 115mm 22mm M14-2.0 INT Black Black Firm 7 12,000 DE272906186
915M Contact Pad 127mm - M14-2.0 INT Black Black Firm 7 10,000 61500138492
915 Contact Pad 127mm - 5/8-11 INT Black Black Firm 7 10,000 61500176237
61681 Centre Pin 125mm 22mm M14-2.0 INT Black Black Firm 7 11,000 DE272906178
01917 Contact Pad 178mm - M14-2.0 INT Black Black Firm 7 4,800 DN999983021
61682 Centre Pin 180mm 22mm M14-2.0 INT Black Black Firm 7 6,000 GN030106126
20245 Centre Pin 178mm 22mm 5/8-11 INT Red Black Extra Hard 7 8,500 60440179541
923 914 61677 61680 61681 61682 9145 915 01917 20245
653M™ Accessories | Abrasive systems
3M™ Accessories
3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction SystemsDesigned with high performance hole patterns when coupled with a 3M™ Random Orbital vacuum equipped sander and discs increases abrasive life and achieves high efficiency dust pickup.
Part Number Description Diameter ThicknessCentre Hole Diameter
Thread SizeNumber of Holes
ColourFace
ColourDensity Rating
Hook Type
Max RPM
Order ID
20427 Disc Pad Kit 76mm 12.7mm - 5/16-24 EXT 6 Yellow Yellow Medium 1 15,000 60440127995
20350 Tapered Edge 76mm 12.7mm - 1/4-20 EXT 3 Red Black Firm 1 15,000 60440127227
20465 Low Profile 152mm 9.5 15.9mm 5/16-24 EXT 49 Red Black Firm 1 12,000 60440128324
05865 Low Profile 152mm 19mm 19mm 5/16-24 EXT 25 Yellow Yellow Medium 1 12,000 60455031009
50542 Direct Flow 152mm 19mm 19mm M8-1.25 EXT - Purple Black Medium 1 12,000 DC272924598
05876 Tapered Edge 152mm 19mm 19mm 5/16-24 EXT 6 Yellow Yellow Medium 1 12,000 60455031009
07390 Tapered Edge 150mm 19mm 19mm M8-1.25 EXT 7 Yellow Yellow Medium 1 12,000 60980016145
50392 Direct Flow 150mm 19mm 19mm 5/16-24 EXT 15 Grey Black Medium 1 12,000 DC272922360
50474 Low Profile 150mm 19mm 19mm 5/16-24 EXT 15 Yellow Yellow Firm 1 12,000 DC272922386
50394 Direct Flow 150mm 19mm 19mm M8-1.25 EXT 15 Grey Black Medium 1 12,000 AT010581521
05876
07390 50474 50394
20350 20465 05865 5054220427
50392
3M™ Hookit™ Disc Pads and Holders for Non Dust Extraction SystemsThese Disc Pads have a hook attachment which drives Hookit™ abrasive products with brushed Nylon loop backings.
Part Number Shape Diameter Thickness Thread Size ColourFace
ColourDensity Rating
Hook Type Max RPM Order ID
07394 Tapered Edge 178mm 25mm M14-2.0 INT Yellow Yellow Medium 1 6,000 60980027753
947 Tapered Edge 178mm 25mm 5/8-11 INT Yellow Yellow Medium 1 6,000 60980009801
05779 Tapered Edge 203mm 19mm 5/8-11 INT Yellow Yellow Medium 1 12,000 60980013936
07389 94707394 05779
3M™ Hookit™ Interface Pads for Clean Sand & Dust Extraction SystemsConstructed of soft durable foam to increase confirmability of the sanding disc. This increased flexibility allows you to follow contours and get closer to most edges while maximising dust extraction.
Part Number Diameter ThicknessNumber of
HolesColour
Face Colour
Density Rating
Hook Type Max RPM Order ID
05771 76mm 12.7mm 6 Grey Black Soft 3 15,000 60455037782
05777 152mm 12.7mm 25 Grey Black Soft 3 12,000 60455031264
05774 150mm 10mm 7 Grey Black Soft 1 12,000 XC003410120
50544 150mm 10mm 49 Grey Black Soft 1 12,000 DC272923988
50545 150mm 5mm 49 Grey Black Soft 1 12,000 DC272923996
05774 50544 5054505771 05777
66 3M™ Accessories | Abrasive systems
3M™ Accessories
3M™ Hookit™ Hand BlocksFor use with Hookit™ sheets. Available in various densities and thicknesses for your hand sanding needs.
Part Number Width Length ColourFace
ColourDensity Rating
Hook Type Order ID
05742 70mm 127mm Yellow Yellow Soft 1 60455033500
05740 70mm 127mm Yellow Black Firm 1 60980032787
05741 70mm 197mm Yellow Black Firm 1 60980032803
05744 70mm 390mm Yellow Black Firm 1 60980032829
05742 05740 05741 05744
3M™ Hookit™ Vacuum Hand BlocksFor use with Hookit™ sheets. Each block features a multiple vacuum hole system to suit 3M™ Hookit™ Clean Sand Sheet Rolls.
Part Number Description Width LengthNumber of
HolesColour
Face Colour
Density Rating
Hook Type Order ID
05207 Block 70mm 127mm Clean Sand Purple Black Firm 1 60455053110
05208 Block 70mm 198mm Clean Sand Purple Black Firm 1 60455053136
05209 Block 70mm 396mm Clean Sand Purple Black Firm 1 60455053144
05216 Block 115mm 225mm Clean Sand Purple Black Firm 1 60455053227
05215 Hose Kit - - - - - - - 60455053151
05207 05208 05209 05216 05215
3M™ Stikit™ Disc Pads and HoldersThese Disc Pads have a vinyl face material which drives Stikit™ abrasive products with Pressure Sensitive adhesive backings.
Part Number Shape Diameter Thickness Thread SizeNumber of
HolesColour
Face Colour
Density Rating
Max RPM Order ID
05576 Tapered Edge 152mm 19mm 5/16-24 EXT - Yellow Blue Medium 12,000 60980009264
05697 Tapered Edge 152mm 19mm 5/16-24 EXT 6 Yellow Blue Medium 12,000 60980012250
05576 05697
3M™ Block & Sponge PadThe block can be used with custom cut sheets of abrasives and offers the user a more comfortable way to operate sanding sheets. The firm hand sanding pad can be used with a three-fold wrap of paper sheets to make hand sanding easier and more efficient.
Part Number Width Length Thickness ColourDensity Rating
Order ID
05519 70mm 127mm - Red Hard 60980020147
05526 140mm 70mm 9.5mm Black Soft 60980011930
05526
05519
673M™ Accessories | Abrasive systems
3M™ Accessories
827930586952
3M™ Hand Blocks and PadsThe Insta-Lok hand block can be used with nonwoven Surface Conditioning Products such as hand pads and clean and finish materials. The Screen Disc Hand Pad is best suited to hand application of screen mesh discs.
Part Number Description Width Length Diamater Thickness Colour Hook TypeDensity Rating
Order ID
952 Insta-Lok Hand Block 85mm 146mm - - Blue 4 Hard 61500018652
05586 Stikit™ Hand Pad 70mm 152mm - 9.5mm Black - Medium 60980006211
82793 Screen Disc Hand Pad - - 203mm 25mm Black - Soft 60980017127
88044
3M™ Hookit™ Fairing BoardsDesigned for fairing, shaping, sanding and finishing boats, plugs and molds. These boards feature adurable, lightweight construction that combines worker comfort and getting desired results quickly.
Part Number Type Width Length Colour Hook Type Order ID
83978 Flexible 115mm 762mm Yellow 1 60980021558
09082 Rigid 115mm 762mm Yellow 1 60430050546
88044 Facing Material 104mm 3.65M Black 1 60980035830
8397809082
3M™ Unitised Wheel MandrelsRecommended for use on portable tools. Excellent for edge deburring and finishing applications of small or intricate work pieces. They are available in a wide range of diameters, grades and densities and limited to a thickness no more than 1 inch.
Part Number Length Shank Size Outside Flange Diameter Wheel Diameter Wheel Width Max RPM Order ID
990 44mm 1/4 Inch 25mm 50-75mm 3-12mm 25,100 61500073343
991 47mm 1/4 Inch 25mm 50-75mm 12-24mm 25,100 61500094208
933 50mm 1/4 Inch 25mm 38-100mm 6-18mm 14,000 61500060969
934 77mm 1/4 Inch 63mm 75-150mm 6-24mm 12,000 61988809341
936 52mm 1/4 Inch 19mm 75-150mm 25mm 22,200 61986508259
990, 991 933936
934
3M™ Roloc™+ HoldersRugged, plastic holder provides support for all Roloc™ products including discs and combi wheels. Holder has deeper internal thread to accept products with Roloc™+ buttons.
Part Number Holder Number Diameter Thread Size Colour Max RPM Order ID
09884 1 25mm 1/4” Shank Black 25,000 FN510078473
09986 2 38mm 1/4” Shank Black 25,000 FN510078564
09991 1 & 7 25mm 1/4" Shank Red 25,000 61500072345
09884 09986 09987 09991
68 3M™ Accessories | Abrasive systems
3M™ Accessories
3M™ Roloc™ Disc Pads and HoldersRubber back-up pad supports 3M™ Roloc™ abrasive discs in different degrees of hardness for varying grinding applications. Conveniently mounts directly to tools with threaded shafts or used with Roloc™ shank to fit collet chuck tools.
Part Number Description Diameter Thread Size ColourDensity Rating
Max RPM Order ID
45102 Disc Shaft 1/4" Shank 1/4-20 EXT Silver - - AC010591421
45101 Back-Up Pad 25mm 1/4-20 INT Black Medium 30,000 60980037943
45096 Back-Up Pad 50mm 1/4-20 INT Black Hard 25,000 60440237786
45095 Back-Up Pad 50mm 1/4-20 INT Black Medium 25,000 60440237653
45091 Back-Up Pad 75mm 1/4-20 INT Black Hard 20,000 60440237778
45092 Back-Up Pad 75mm 1/4-20 INT Black Medium 18,000 60440237661
45090 Back-Up Pad 75mm 1/4-20 INT Black Soft 15,000 60440237448
85000 For Angle Grinders 75mm M10-1.5 INT Black Hard 20,000 60440237810
84999 For Angle Grinders 75mm M14-2.0 INT Black Medium 18,000 60980025286
45102 45101 45096 45095 45091 45092 45090 85000
84999
3M™ Roloc™ TS MandrelUse with 3/4 inch Roloc™ TS and TSM Discs. Designed for cleaning and finishing of airplane seat track channels.
Part Number Description Length Thread Size Shank Size Order ID
85097 Track Cleaning 50mm Roloc™ TS or TSM 1/4 Inch 60980031367 85097
3M™ MandrelsUse to hold abrasive strips 25mm x 38mm long. Corrosion protected with thread and shaft machined to industrial standards.
Part Number Length Shank Size Max RPM Order ID
935 73mm 1/4 Inch 14,000 61988809358
935
3M™ Wheel Flanges & AdaptorsWheel flanges are used to reduce wheel cores and internal diameters to fit smaller shaft sizes. These are manufactured of spun aluminium The wheel adaptors are designed to be used with Scotch-Brite™ wheels that have a 25mm core size so that they can be adapted to tapered spindles.
Part Number Diameter Centre Hole Diameter Use with Order ID
356 75mm 15.8mm 61988835544
- - Tapered 25mm wide x 25mm bore AC010592874
- - Tapered 50mm wide x 25mm bore AC010596099356
693M™ Accessories | Abrasive systems
3M™ Accessories
05719 05737
3M™ Perfect-it™ Hookit™ Compounding & Polishing PadsHigh performance polishing pads. For use with 3M™ Compounds & Polishes. Use with 3M™ Hookit™ back up pads, part numbers 05717 or 05718.
Part Number Diameter Type Attachment Type Colour Order ID
05719 203mm 100 % Wool Compounding Hook and Loop White 60455054563
05737 228mm Foam Compounding Hook and Loop White 60455065700
05738 203mm Foam Polishing Hook and Loop Black 60455065726
05733 203mm Foam Polishing Hook and Loop Blue 60455065783
05738 05733
3M™ Hookit™ Back Up Pads for Compounding & PolishingHigh performance pads for use with compounding and polishing pads using the hook and loop attachment system.
Part Number Diameter Type Attachment Type Colour Order ID
05717 178mm x 5/8-11 - Hook and Loop Yellow AC010578535
05718 178mm x 5/8-11 Superbuff™ Hook and Loop Yellow 60455065031 05717 05718
3M™ Superbuff™ PadsHigh performance double sided wool compounding pads. For use with 3M™ Polishes and 3M™ Superbuff™ adaptor system.
Part Number Diameter Type Attachment Type Colour Order ID
05701 203mm Blend Wool Compounding Screw on White XS002000643
05703 203mm 100 % Wool Compounding Screw on White XA600057039
05710 14mm - 5/8-11 Adaptor Screw on Silver AC010581588
05700 05701 05703 05710
70
Index:Order ID Product Name Page Order ID Product Name Page
9116593 Scotch-Brite™ EXL Unitised Wheel 4460010025553 3M™ Stikit™ Gold Film Discs (No Dust Extraction) 2360010025611 3M™ Stikit™ Gold Film Discs (No Dust Extraction) 2360010025652 3M™ Stikit™ Gold Film Discs (No Dust Extraction) 2360010025694 3M™ Stikit™ Gold Film Discs (No Dust Extraction) 2360200006298 3M™ Hookit™ Microfinishing Film Discs (With Dust Extraction) 2160430050546 3M™ Hookit™ Fairing Boards 6760440127227 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 6560440127995 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 6560440128282 3M™ Air Tool Lubricant 6260440128324 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 6560440179400 3M™ Air Powered Disc Sanders 6060440179418 3M™ Air Powered Cut-Off Wheel Tools 6060440179426 3M™ Air Powered Cut-Off Wheel Tools 6060440179459 3M™ Air Powered Die Grinders 6060440179467 3M™ Air Powered Die Grinders 6060440179483 3M™ Air Powered Die Grinders 6060440179541 3M™ Hook & Loop Disc Pads and Holders 6460440206963 3M™ Roloc™ Fibre Disc 983C 5160440207060 3M™ Roloc™ Fibre Disc 983C 5160440207102 3M™ Roloc™ Fibre Disc 983C 5160440207110 3M™ Roloc™ Fibre Disc 983C 5160440207169 3M™ Roloc™ Fibre Disc 983C 5160440207177 3M™ Roloc™ Fibre Disc 983C 5160440208902 3M™ Roloc™ Disc 361F 5260440208936 3M™ Roloc™ Disc 361F 5260440208944 3M™ Roloc™ Disc 361F 5260440209017 3M™ Roloc™ Disc 361F 5260440209025 3M™ Roloc™ Disc 361F 5260440209140 3M™ Roloc™ Disc 361F 5260440209157 3M™ Roloc™ Disc 361F 5260440209298 3M™ Roloc™ Disc 361F 5260440209306 3M™ Roloc™ Disc 361F 5260440229262 3M™ Cubitron™ II Fibre Disc 982C 1460440229270 3M™ Cubitron™ II Fibre Disc 982C 1460440229288 3M™ Cubitron™ II Fibre Disc 982C 1460440229296 3M™ Cubitron™ II Fibre Disc 987C 1460440229304 3M™ Cubitron™ II Fibre Disc 987C 1460440229312 3M™ Cubitron™ II Fibre Disc 987C 1460440229353 3M™ Cubitron™ II Fibre Disc 982C 1460440229361 3M™ Cubitron™ II Fibre Disc 982C 1460440229379 3M™ Cubitron™ II Fibre Disc 982C 1460440229395 3M™ Cubitron™ II Fibre Disc 982C 1460440229403 3M™ Cubitron™ II Fibre Disc 982C 1460440229411 3M™ Cubitron™ II Fibre Disc 982C 1460440229577 3M™ Cubitron™ II Fibre Disc 987C 1460440229585 3M™ Cubitron™ II Fibre Disc 987C 1460440229593 3M™ Cubitron™ II Fibre Disc 987C 1460440229619 3M™ Cubitron™ II Fibre Disc 987C 1460440229627 3M™ Cubitron™ II Fibre Disc 987C 1460440229635 3M™ Cubitron™ II Fibre Disc 987C 1460440230021 3M™ Cubitron™ II Fibre Disc 982C 1460440230039 3M™ Cubitron™ II Fibre Disc 982C 1460440230047 3M™ Cubitron™ II Fibre Disc 982C 1460440230054 3M™ Cubitron™ II Fibre Disc 987C 1460440230062 3M™ Cubitron™ II Fibre Disc 987C 1460440230070 3M™ Cubitron™ II Fibre Disc 987C 1460440230138 3M™ Cubitron™ II Roloc™ Durable Edge Disc 984F 5160440230146 3M™ Cubitron™ II Roloc™ Durable Edge Disc 984F 5160440230211 3M™ Cubitron™ II Roloc™ Durable Edge Disc 984F 5160440230229 3M™ Cubitron™ II Roloc™ Durable Edge Disc 984F 5160440230294 3M™ Cubitron™ II Roloc™ Durable Edge Disc 984F 5160440230302 3M™ Cubitron™ II Roloc™ Durable Edge Disc 984F 5160440236283 3M™ Filtrete™ Filter Bag 6260440236283 3M™ Filter Bag Adaptor 6260440236341 3M™ Air Powered Die Grinders 6060440236689 3M™ Air-Powered File Belt Sanders 6160440236697 3M™ Air-Powered File Belt Sanders 6160440236705 3M File Belt Sander Attachment Arms 6160440236713 3M File Belt Sander Attachment Arms 6160440236721 3M File Belt Sander Attachment Arms 6160440236739 3M File Belt Sander Attachment Arms 6160440236747 3M File Belt Sander Attachment Arms 6160440236754 3M File Belt Sander Attachment Arms 6160440236762 3M File Belt Sander Attachment Arms 6160440236770 3M File Belt Sander Attachment Arms 6160440237448 3M™ Roloc™ Disc Pads and Holders 6860440237653 3M™ Roloc™ Disc Pads and Holders 6860440237661 3M™ Roloc™ Disc Pads and Holders 6860440237778 3M™ Roloc™ Disc Pads and Holders 6860440237786 3M™ Roloc™ Disc Pads and Holders 6860440237810 3M™ Roloc™ Disc Pads and Holders 6860440238115 3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum Systems 5960440238123 3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum Systems 59
60440238149 3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum Systems 5960440238156 3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum Systems 5960440238164 3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum Systems 5960440238180 3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum Systems 5960440238198 3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum Systems 5960440238206 3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum Systems 5960440238214 3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum Systems 5960440238222 3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum Systems 5960440238230 3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum Systems 5960440238248 3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum Systems 5960440238263 3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum Systems 5960440238271 3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating Vacuum 5960440238289 3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating Vacuum 5960440238297 3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating Vacuum 5960440238313 3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating Vacuum 5960440238321 3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating Vacuum 5960440238347 3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating Vacuum 5960440238446 3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum Systems 5960440238453 3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum Systems 5960440238479 3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating Vacuum 5960440238479 3M™ Orbital Sander 6060440238479 3M™ Air Powered Disc Sanders 6060440272973 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440272999 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440273005 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440273013 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440273021 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440273039 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440273047 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440273054 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440273062 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440273104 3M™ Hookit™ Clean Sand Paper Disc 236U 1860440273161 3M™ Hookit™ Clean Sand Paper Disc 236U 1860455031009 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 6560455031009 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 6560455031264 3M™ Hookit™ Interface Pads for Clean Sand & Dust Extraction Systems 6560455031710 3M™ Hookit™ Green Paper Disc (With Dust Extraction) 1960455033500 3M™ Hookit™ Hand Blocks 6660455034847 3M™ Perfect-It™ Clean and Shine 5660455034904 3M™ Perfect-It™ Polishes 5660455034938 3M™ Perfect-It™ Polishes 5660455036917 3M™ Hookit™ Purple Paper Disc - Clean Sand 1960455036933 3M™ Hookit™ Purple Paper Disc - Clean Sand 1960455036958 3M™ Hookit™ Purple Paper Disc - Clean Sand 1960455036974 3M™ Hookit™ Purple Paper Disc - Clean Sand 1960455036982 3M™ Hookit™ Purple Paper Disc - Clean Sand 1960455036990 3M™ Hookit™ Purple Paper Disc - Clean Sand 1960455037782 3M™ Hookit™ Interface Pads for Clean Sand & Dust Extraction Systems 6560455047351 3M™ Hookit™ Purple Paper Disc - Clean Sand 1960455052617 3M™ Hookit™ Purple Paper Disc - Clean Sand 1960455052989 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455052997 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053011 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053037 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053052 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053078 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053094 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053110 3M™ Hookit™ Vacuum Hand Blocks 6660455053136 3M™ Hookit™ Vacuum Hand Blocks 6660455053144 3M™ Hookit™ Vacuum Hand Blocks 6660455053151 3M™ Hookit™ Vacuum Hand Blocks 6660455053227 3M™ Hookit™ Vacuum Hand Blocks 6660455053813 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053839 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053854 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053870 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053896 3M™ Hookit™ Purple Clean Sand Sheet Rolls 24
iNdeX | Abrasive systems
Index
iNdeX | Abrasive systems
71iNdeX | Abrasive systems
Index
Order ID Product Name Page Order ID Product Name Page
60455053912 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455053920 3M™ Hookit™ Purple Clean Sand Sheet Rolls 2460455054563 3M™ Perfect-it™ Hookit™ Compounding & Polishing Pads 6960455065031 3M™ Hookit™ Back Up Pads for Compounding & Polishing 6960455065700 3M™ Perfect-it™ Hookit™ Compounding & Polishing Pads 6960455065726 3M™ Perfect-it™ Hookit™ Compounding & Polishing Pads 6960455065783 3M™ Perfect-it™ Hookit™ Compounding & Polishing Pads 6960455069991 3M™ Flexible Abrasives Hookit™ Sheet 2960455070007 3M™ Flexible Abrasives Hookit™ Sheet 2960455070015 3M™ Flexible Abrasives Hookit™ Sheet 2960455070023 3M™ Flexible Abrasives Hookit™ Sheet 2960455070031 3M™ Flexible Abrasives Hookit™ Sheet 2960455070049 3M™ Flexible Abrasives Hookit™ Sheet 2960455071179 3M™ Perfect-It™ Compounds 5660650003746 3M™ Stikit™ Green Paper Discs (No Dust Extraction) 2460650003779 3M™ Stikit™ Green Paper Discs (No Dust Extraction) 2460650011772 3M™ Hookit™ Green Paper Disc (No Dust Extraction) 2260650011780 3M™ Hookit™ Green Paper Disc (No Dust Extraction) 2260650014495 3M™ Hookit™ Green Paper Disc (With Dust Extraction) 1960650014529 3M™ Hookit™ Green Paper Disc (With Dust Extraction) 1960650017654 3M™ Roloc™ Disc 777F 5160650017662 3M™ Roloc™ Disc 777F 5160650017696 3M™ Roloc™ Disc 777F 5160650017704 3M™ Roloc™ Disc 777F 5160650018058 3M™ Roloc™ Disc 777F 5160650034832 3M™ Hookit™ Finishing Film Discs (No Dust Extraction) 2260650034840 3M™ Hookit™ Finishing Film Discs (No Dust Extraction) 2260650034873 3M™ Hookit™ Finishing Film Discs (No Dust Extraction) 2260980006211 3M™ Hand Blocks and Pads 6760980009264 3M™ Stikit™ Disc Pads and Holders 6660980009801 3M™ Hookit™ Disc Pads and Holders for Non Dust Extraction Systems 6560980011930 3M™ Block & Sponge Pad 6660980012250 3M™ Stikit™ Disc Pads and Holders 6660980013936 3M™ Hookit™ Disc Pads and Holders for Non Dust Extraction Systems 6560980016145 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 6560980017127 3M™ Hand Blocks and Pads 6760980020147 3M™ Block & Sponge Pad 6660980021558 3M™ Hookit™ Fairing Boards 6760980025286 3M™ Roloc™ Disc Pads and Holders 6860980027753 3M™ Hookit™ Disc Pads and Holders for Non Dust Extraction Systems 6560980028801 3M™ Green Corps™ Cut-Off Wheels 760980028819 3M™ Green Corps™ Cut-Off Wheels 760980030427 3M™ Green Corps™ Cut-Off Wheels 760980031367 3M™ Roloc™ TS Mandrel 6860980032787 3M™ Hookit™ Hand Blocks 6660980032803 3M™ Hookit™ Hand Blocks 6660980032829 3M™ Hookit™ Hand Blocks 6660980035830 3M™ Hookit™ Fairing Boards 6760980037943 3M™ Roloc™ Disc Pads and Holders 6861000043317 Scotch-Brite™ Clean and Finish Rolls 3061500013174 3M™ Hook & Loop Disc Pads and Holders 6461500018652 3M™ Hand Blocks and Pads 6761500037876 Scotch-Brite™ Metal Finishing Wheel 4761500037918 Scotch-Brite™ Metal Finishing Wheel 4761500038023 Scotch-Brite™ Metal Finishing Wheel 4761500051646 Scotch-Brite™ Multi-Finishing Wheel 4861500051653 Scotch-Brite™ Multi-Finishing Wheel 4861500051661 Scotch-Brite™ Multi-Finishing Wheel 4861500060969 3M™ Unitised Wheel Mandrels 6761500072345 3M™ Roloc™+ Holders 6761500073343 3M™ Unitised Wheel Mandrels 6761500079399 Scotch-Brite™ EXL Unitised Wheel 4461500090578 Scotch-Brite™ Roloc™+ Clean and Strip Disc 4161500094208 3M™ Unitised Wheel Mandrels 6761500099223 Scotch-Brite™ Roloc™ EXL Unitised Wheel 5361500099249 Scotch-Brite™ Roloc™ EXL Unitised Wheel 5361500099280 Scotch-Brite™ Roloc™ EXL Unitised Wheel 5361500099322 Scotch-Brite™ Roloc™ EXL Unitised Wheel 5361500109550 Scotch-Brite™ Metal Finishing Wheel 4761500118148 Scotch-Brite™ Clean and Finish Disc 2361500119344 Scotch-Brite™ Roloc™ Coating Removal Disc 5461500119484 Scotch-Brite™ Roloc™ Coating Removal Disc 5461500120086 Scotch-Brite™ Coating Removal Discs (Hook and Loop) 1561500121704 Scotch-Brite™ Cut and Polish Rolls 3061500123205 Scotch-Brite™ Hand Pads 3161500123239 Scotch-Brite™ Hand Pads 3161500123247 Scotch-Brite™ Hand Pads 3161500126315 Scotch-Brite™ Light Deburring Wheel 4761500126588 Scotch-Brite™ EXL Deburring Wheel 4761500126620 Scotch-Brite™ EXL Deburring Wheel 4761500128766 Scotch-Brite™ EXL Unitized Wheel 4561500129244 Scotch-Brite™ Multi-Flex Abrasive Sheet Rolls 3061500132172 Scotch-Brite™ Roloc™ Bristle Disc 5461500132180 Scotch-Brite™ Roloc™ Bristle Disc 5461500132198 Scotch-Brite™ Roloc™ Bristle Disc 5461500132214 Scotch-Brite™ Roloc™ Bristle Disc 5461500132222 Scotch-Brite™ Roloc™ Bristle Disc 5461500132867 Scotch-Brite™ Multi-Finishing Wheel 4861500134426 Scotch-Brite™ Multi-Flex Abrasive Sheet Rolls 3061500135423 Scotch-Brite™ Roloc™ Bristle Disc 5461500136686 Scotch-Brite™ Hand Pads 3161500137700 Scotch-Brite™ High Strength Disc 4961500137726 Scotch-Brite™ High Strength Disc 49
61500137767 Scotch-Brite™ High Strength Disc 4961500137809 Scotch-Brite™ High Strength Disc 4961500138476 3M™ Hook & Loop Disc Pads and Holders 6461500138492 3M™ Hook & Loop Disc Pads and Holders 6461500139391 Scotch-Brite™ Radial Bristle Discs 4461500139409 Scotch-Brite™ Radial Bristle Discs 4461500139417 Scotch-Brite™ Radial Bristle Discs 4461500141710 Scotch-Brite™ Roloc™ Surface Conditioning Disc 5361500141728 Scotch-Brite™ Roloc™ Surface Conditioning Disc 5361500141736 Scotch-Brite™ Roloc™ Surface Conditioning Disc 5361500141744 Scotch-Brite™ Roloc™ Surface Conditioning Disc 5361500141785 Scotch-Brite™ Roloc™ Surface Conditioning Disc 5361500141793 Scotch-Brite™ Roloc™ Surface Conditioning Disc 5361500141801 Scotch-Brite™ Roloc™ Surface Conditioning Disc 5361500141819 Scotch-Brite™ Roloc™ Surface Conditioning Disc 5361500141835 Scotch-Brite™ Roloc™ SE Surface Conditioning Disc 5261500151446 Scotch-Brite™ Radial Bristle Brush 4461500151446 Scotch-Brite™ Radial Bristle Brush 4861500151461 Scotch-Brite™ Radial Bristle Brush 4461500151461 Scotch-Brite™ Radial Bristle Brush 4861500151479 Scotch-Brite™ Radial Bristle Brush 4461500151479 Scotch-Brite™ Radial Bristle Brush 4861500153509 Scotch-Brite™ Roloc™ Clean and Strip XT Disc 5461500156072 Scotch-Brite™ Clean and Finish Disc 2361500162914 Scotch-Brite™ Multi-Finishing Wheel 4861500163334 Scotch-Brite™ Belts 3961500176070 Scotch-Brite™ Radial Bristle Discs 4461500176088 Scotch-Brite™ Radial Bristle Discs 4461500176096 Scotch-Brite™ Radial Bristle Discs 4461500176237 3M™ Hook & Loop Disc Pads and Holders 6461500176419 Scotch-Brite™ Roloc™ Clean and Strip XT Disc 5461500187747 Scotch-Brite™ Radial Bristle Brush 4461500187747 Scotch-Brite™ Radial Bristle Brush 4861500187770 Scotch-Brite™ Radial Bristle Brush 4461500187770 Scotch-Brite™ Radial Bristle Brush 4861500189446 Scotch-Brite™ Radial Bristle Brush 4861500189453 Scotch-Brite™ Radial Bristle Brush 4861500189461 Scotch-Brite™ Radial Bristle Brush 4861500189479 Scotch-Brite™ Radial Bristle Brush 4861500190212 Scotch-Brite™ Radial Bristle Brush 4861500291457 Scotch-Brite™ Surface Conditioning Disc 1661500291465 Scotch-Brite™ Surface Conditioning Disc 1661500291473 Scotch-Brite™ Surface Conditioning Disc 1661500291481 Scotch-Brite™ Surface Conditioning Disc 1661500291507 Scotch-Brite™ Surface Conditioning Disc 1661500291796 Scotch-Brite™ Surface Conditioning Disc 1661500291804 Scotch-Brite™ Surface Conditioning Disc 1661500291812 Scotch-Brite™ Surface Conditioning Disc 1661500291820 Scotch-Brite™ Surface Conditioning Disc 1661500291838 Scotch-Brite™ Surface Conditioning Disc 1661500291846 Scotch-Brite™ Surface Conditioning Disc 1661500291853 Scotch-Brite™ Surface Conditioning Disc 1661500291879 Scotch-Brite™ Surface Conditioning Disc 1661500291887 Scotch-Brite™ Surface Conditioning Disc 1661500291895 Scotch-Brite™ Surface Conditioning Disc 1661500291903 Scotch-Brite™ Surface Conditioning Disc 1661500292448 Scotch-Brite™ Light Grinding and Blending Disc 1661500292455 Scotch-Brite™ Light Grinding and Blending Disc 1661500292489 Scotch-Brite™ Light Grinding and Blending Disc 1661500292497 Scotch-Brite™ Light Grinding and Blending Disc 1661500292505 Scotch-Brite™ Light Grinding and Blending Disc 1661500292539 Scotch-Brite™ Light Grinding and Blending Disc 1661500292562 Scotch-Brite™ Light Grinding and Blending Disc 1661500292596 Scotch-Brite™ Light Grinding and Blending Disc 1661500292661 Scotch-Brite™ Roloc™ Light Grinding and Blending Disc 5261500292679 Scotch-Brite™ Roloc™ Light Grinding and Blending Disc 5261500292687 Scotch-Brite™ Roloc™ Light Grinding and Blending Disc 5261500292695 Scotch-Brite™ Roloc™ Light Grinding and Blending Disc 5261500295508 Scotch-Brite™ Hand Pads 3161500295805 Scotch-Brite™ Durable Flex Belts 3861500295821 Scotch-Brite™ Durable Flex Belts 3861500295839 Scotch-Brite™ Durable Flex Belts 3861500295847 Scotch-Brite™ Durable Flex Belts 3861500295888 Scotch-Brite™ Durable Flex Belts 3861500295904 Scotch-Brite™ Durable Flex Belts 3861500295912 Scotch-Brite™ Durable Flex Belts 3861500295920 Scotch-Brite™ Durable Flex Belts 3861500295961 Scotch-Brite™ Durable Flex Belts 3861500295987 Scotch-Brite™ Durable Flex Belts 3861500295995 Scotch-Brite™ Durable Flex Belts 3861500296001 Scotch-Brite™ Durable Flex Belts 3861500297686 Scotch-Brite™ Durable Flex Hand Pads 3161500297694 Scotch-Brite™ Durable Flex Hand Pads 3161500297991 Scotch-Brite™ Hookit™ Random Orbital Discs 2361500298007 Scotch-Brite™ Hookit™ Random Orbital Discs 2361500298015 Scotch-Brite™ Hookit™ Random Orbital Discs 2361500298023 Scotch-Brite™ Hookit™ Random Orbital Discs 2361500298346 Scotch-Brite™ Hookit™ Random Orbital Discs 2361500298353 Scotch-Brite™ Hookit™ Random Orbital Discs 2361500299310 Scotch-Brite™ Roloc™ Rapid Cut Unitized Wheel 5361500311347 Scotch-Brite™ Rapid Cut Unitized Wheel 4361986508259 3M™ Unitised Wheel Mandrels 6761988809341 3M™ Unitised Wheel Mandrels 6761988809358 3M™ Mandrels 68
72
Order ID Product Name Page Order ID Product Name Page
61988835544 3M™ Wheel Flanges & Adaptors 68 AC019309932 Scotch-Brite™ Durable Flex Belts 38AC010419201 3M™ Cloth Belts 577F 35AC010419508 3M™ Cloth Belts 577F 35AC010419524 3M™ Cloth Belts 577F 35AC010419540 3M™ Cloth Belts 577F 35AC010419607 3M™ Cloth Belts 351A 36AC010565078 Scotch-Brite™ Clean and Strip Discs 41AC010565086 Scotch-Brite™ Clean and Strip Discs 41AC010574310 3M™ Hookit™ Gold Paper Roll 26AC010574328 3M™ Hookit™ Gold Paper Roll 26AC010578535 3M™ Hookit™ Back Up Pads for Compounding & Polishing 69AC010578626 3M™ Cloth Belts 351A 36AC010578642 3M™ Cloth Belts 351A 36AC010578659 3M™ Cloth Belts 351A 36AC010578667 3M™ Cloth Belts 351A 36AC010578683 3M™ Cloth Belts 351A 36AC010578691 3M™ Cloth Belts 351A 36AC010578709 3M™ Cloth Belts 351A 36AC010578717 3M™ Cloth Belts 351A 36AC010579822 3M™ Cloth Belts 351A 36AC010579871 3M™ Cloth Belts 351A 36AC010579889 3M™ Cloth Belts 351A 36AC010579897 3M™ Cloth Belts 351A 36AC010579905 3M™ Cloth Belts 351A 36AC010579939 3M™ Cloth Belts 351A 36AC010579947 3M™ Cloth Belts 351A 36AC010579962 3M™ Cloth Belts 351A 36AC010580069 3M™ Cloth Belts 351A 36AC010580093 3M™ Cloth Belts 351A 36AC010580101 3M™ Cloth Belts 351A 36AC010580119 3M™ Cloth Belts 351A 36AC010580135 3M™ Cloth Belts 351A 36AC010580143 3M™ Cloth Belts 351A 36AC010580192 3M™ Cloth Belts 351A 36AC010580200 3M™ Cloth Belts 351A 36AC010580226 3M™ Cloth Belts 351A 36AC010580234 3M™ Cloth Belts 351A 36AC010580242 3M™ Cloth Belts 351A 36AC010581588 3M™ Superbuff™ Pads 69AC010583642 3M™ Green-Corps™ Flexible Grinding Discs 13AC010591421 3M™ Roloc™ Disc Pads and Holders 68AC010592825 Scotch-Brite™ Coating Removal Discs (Hook and Loop) 15AC010592866 Scotch-Brite™ High Strength Mop 49AC010592874 3M™ Wheel Flanges & Adaptors 68AC010593146 Scotch-Brite™ Clean and Strip Discs 49AC010593278 3M™ Hook & Loop Disc Pads and Holders 64AC010593328 Scotch-Brite™ High Strength Mop 49AC010593336 Scotch-Brite™ High Strength Mop 49AC010593344 Scotch-Brite™ Durable Flex Belts 38AC010593351 Scotch-Brite™ Durable Flex Belts 38AC010593369 Scotch-Brite™ Durable Flex Belts 38AC010593377 Scotch-Brite™ Durable Flex Belts 38AC010593385 Scotch-Brite™ Durable Flex Belts 38AC010593393 Scotch-Brite™ Durable Flex Belts 38AC010593401 Scotch-Brite™ Durable Flex Belts 38AC010593419 Scotch-Brite™ Durable Flex Belts 38AC010593427 Scotch-Brite™ Durable Flex Belts 38AC010593435 Scotch-Brite™ Durable Flex Belts 38AC010593443 Scotch-Brite™ Durable Flex Belts 38AC010593450 Scotch-Brite™ Durable Flex Belts 38AC010593468 Scotch-Brite™ Durable Flex Belts 38AC010593476 Scotch-Brite™ Durable Flex Belts 38AC010593484 Scotch-Brite™ Durable Flex Belts 38AC010593492 Scotch-Brite™ Durable Flex Belts 38AC010593500 Scotch-Brite™ Durable Flex Belts 38AC010593518 Scotch-Brite™ Durable Flex Belts 38AC010593575 Scotch-Brite™ Clean and Strip Discs 41AC010593583 Scotch-Brite™ Clean and Strip Discs 41AC010594029 3M™ High Pressure Fibre Disc Back Up Pads 64AC010594029 3M™ Fibre Disc Back Up Pads & Extended Retaining Nut 64AC010594664 Scotch-Brite™ High Strength Mop 49AC010594805 Scotch-Brite™ Durable Flex Belts 38AC010594813 Scotch-Brite™ Durable Flex Belts 38AC010594821 Scotch-Brite™ Durable Flex Belts 38AC010594847 Scotch-Brite™ Rapid Cut Unitized Wheel 45AC010594854 Scotch-Brite™ Rapid Cut Unitized Wheel 45AC010594862 Scotch-Brite™ EXL Unitized Wheel 45AC010594870 Scotch-Brite™ EXL Unitized Wheel 45AC010594888 Scotch-Brite™ EXL Unitized Wheel 45AC010594896 Scotch-Brite™ EXL Unitized Wheel 45AC010594904 3M™ Gold Paper Roll 25AC010594912 3M™ Cloth Belts 577F 35AC010594920 3M™ Cloth Belts 577F 35AC010594938 3M™ Gold Paper Roll 25AC010595554 3M™ Cloth Belts 577F 35AC010596099 3M™ Wheel Flanges & Adaptors 68AC019165524 3M™ Hookit™ Microfinishing Film Discs (With Dust Extraction) 21AC019174674 3M™ Cloth Belts 577F 35AC019174690 3M™ Cloth Belts 577F 35AC019174732 3M™ Cloth Belts 577F 35AC019174740 3M™ Cloth Belts 577F 35AC019174773 3M™ Cloth Belts 577F 35AC019174807 3M™ Cloth Belts 577F 35
AC019174964 3M™ Cloth Belts 351A 36AC019175473 3M™ Trizact™ Cloth Belts 237AA 37AC019175481 3M™ Trizact™ Cloth Belts 237AA 37AC019175607 3M™ Cloth Belts 577F 35AC019175813 3M™ Cloth Belts 351A 36AC019175821 3M™ Cloth Belts 351A 36AC019175839 3M™ Cloth Belts 351A 36AC019175870 3M™ Cloth Belts 351A 36AC019175896 3M™ Cloth Belts 351A 36AC019175953 3M™ Cloth Belts 351A 36AC019176068 3M™ Cloth Belts 351A 36AC019176138 3M™ Cloth Belts 351A 36AC019176174 3M™ Cloth Belts 351A 36AC019176273 3M™ Cloth Belts 351A 36AC019176530 3M™ Cloth Belts 577F 35AC019176571 3M™ Cloth Belts 577F 35AC019176647 3M™ Cloth Belts 577F 35AC019176654 3M™ Cloth Belts 577F 35AC019176662 3M™ Cloth Belts 577F 35AC019176704 3M™ Cloth Belts 577F 35AC019176746 3M™ Cloth Belts 577F 35AC019176877 3M™ Cloth Belts 577F 35AC019176968 3M™ Cloth Belts 577F 35AC019177115 3M™ Cloth Belts 577F 35AC019177123 3M™ Cloth Belts 577F 35AC019177156 3M™ Cloth Belts 577F 35AC019177222 3M™ Cloth Belts 577F 35AC019177255 3M™ Cloth Belts 577F 35AC019177263 3M™ Cloth Belts 577F 35AC019177305 3M™ Cloth Belts 577F 35AC019177479 3M™ Cloth Belts 577F 35AC019177495 3M™ Cloth Belts 577F 35AC019177511 3M™ Cloth Belts 577F 35AC019177560 3M™ Cloth Belts 577F 35AC019177586 3M™ Cloth Belts 577F 35AC019177602 3M™ Cloth Belts 577F 35AC019177610 3M™ Cloth Belts 577F 35AC019177677 3M™ Cloth Belts 577F 35AC019177727 3M™ Cloth Belts 577F 35AC019177735 3M™ Cloth Belts 577F 35AC019177776 3M™ Cloth Belts 577F 35AC019177834 3M™ Cloth Belts 577F 35AC019177868 3M™ Cloth Belts 577F 35AC019177926 3M™ Cloth Belts 577F 35AC019177934 3M™ Cloth Belts 577F 35AC019177959 3M™ Cloth Belts 577F 35AC019178015 3M™ Cloth Belts 577F 35AC019178031 3M™ Cloth Belts 577F 35AC019178049 3M™ Cloth Belts 577F 35AC019178064 3M™ Cloth Belts 577F 35AC019178072 3M™ Cloth Belts 577F 35AC019178163 3M™ Cloth Belts 577F 35AC019178171 3M™ Cloth Belts 577F 35AC019178189 3M™ Cloth Belts 577F 35AC019178254 3M™ Cloth Belts 577F 35AC019178270 3M™ Cloth Belts 577F 35AC019178304 3M™ Cloth Belts 577F 35AC019178353 3M™ Cloth Belts 577F 35AC019178379 3M™ Cloth Belts 577F 35AC019178387 3M™ Cloth Belts 577F 35AC019178411 3M™ Cloth Belts 577F 35AC019179617 3M™ Cloth Belts 351A 36AC019179765 3M™ Cloth Belts 351A 36AC019179781 3M™ Cloth Belts 351A 36AC019179914 3M™ Cloth Belts 351A 36AC019179948 3M™ Cloth Belts 351A 36AC019179971 3M™ Cloth Belts 351A 36AC019179989 3M™ Cloth Belts 351A 36AC019180029 3M™ Cloth Belts 351A 36AC019180250 3M™ Cloth Belts 351A 36AC019180382 3M™ Cloth Belts 351A 36AC019180408 3M™ Cloth Belts 351A 36AC019180622 3M™ Cloth Belts 351A 36AC019181522 3M™ Cloth Belts 351A 36AC019182008 3M™ Cloth Belts 577F 35AC019182107 3M™ Cloth Belts 577F 35AC019182180 3M™ Cloth Belts 577F 35AC019182255 3M™ Cloth Belts 577F 35AC019182479 3M™ Cloth Belts 351A 36AC019183098 3M™ Cloth Belts 351A 36AC019187858 3M™ Cloth Belts 577F 35AC019188291 3M™ Cloth Belts 577F 35AC019191249 3M™ Cloth Belts 351A 36AC019191570 3M™ Cloth Belts 577F 35AC019192056 3M™ Cloth Belts 351A 36AC019192965 3M™ Cloth Belts 577F 35AC019195919 3M™ Cloth Belts 577F 35AC019205189 3M™ Hookit™ Microfinishing Film Discs (With Dust Extraction) 21AC019205239 3M™ Cloth Belts 577F 35AC019209504 3M™ Trizact™ Cloth Belts 237AA 37AC019209694 3M™ Trizact™ Cloth Belts 237AA 37AC019209744 3M™ Trizact™ Cloth Belts 237AA 37AC019209769 3M™ Trizact™ Cloth Belts 237AA 37AC019210148 3M™ Trizact™ Cloth Belts 237AA 37
iNdeX | Abrasive systems
Index
iNdeX | Abrasive systems
73
Order ID Product Name Page Order ID Product Name Page
AC019210569 3M™ Trizact™ Cloth Belts 237AA 37AC019211450 3M™ Trizact™ Cloth Belts 237AA 37AC019211567 3M™ Trizact™ Cloth Belts 237AA 37AC019211575 3M™ Trizact™ Cloth Belts 237AA 37AC019211609 3M™ Trizact™ Cloth Belts 237AA 37AC019211880 3M™ Trizact™ Cloth Belts 237AA 37AC019211898 3M™ Trizact™ Cloth Belts 237AA 37AC019212151 3M™ Trizact™ Cloth Belts 237AA 37AC019212391 3M™ Trizact™ Cloth Belts 237AA 37AC019214009 3M™ Trizact™ Cloth Belts 237AA 37AC019217861 3M™ Trizact™ Cloth Belts 237AA 37AC019223281 3M™ Trizact™ Cloth Belts 237AA 37AC019224594 3M™ Trizact™ Cloth Belts 237AA 37AC019227597 3M™ Trizact™ Cloth Belts 237AA 37AC019227605 3M™ Trizact™ Cloth Belts 237AA 37AC019228132 3M™ Trizact™ Cloth Belts 237AA 37AC019228199 3M™ Trizact™ Cloth Belts 237AA 37AC019228207 3M™ Trizact™ Cloth Belts 237AA 37AC019228256 3M™ Trizact™ Cloth Belts 237AA 37AC019228264 3M™ Trizact™ Cloth Belts 237AA 37AC019230260 Scotch-Brite™ Clean and Finish Rolls 30AC019237794 3M™ Cloth Belts 351A 36AC019238289 3M™ Cloth Belts 351A 36AC019281743 3M™ Cloth Belts 577F 35AC019282295 3M™ Cloth Belts 351A 36AC019305195 3M™ Trizact™ Cloth Belts 237AA 37AC019309445 Scotch-Brite™ Durable Flex Belts 38AC019309452 Scotch-Brite™ Durable Flex Belts 38AC019309460 Scotch-Brite™ Durable Flex Belts 38AC019309940 Scotch-Brite™ Durable Flex Belts 38AC019309957 Scotch-Brite™ Durable Flex Belts 38AC019309965 Scotch-Brite™ Durable Flex Belts 38AC019309973 Scotch-Brite™ Durable Flex Belts 38AC019309981 Scotch-Brite™ Durable Flex Belts 38AC019309999 Scotch-Brite™ Durable Flex Belts 38AC019310005 Scotch-Brite™ Durable Flex Belts 38AC019310013 Scotch-Brite™ Durable Flex Belts 38AN000417467 Scotch-Brite™ Clean and Strip Discs 49AN019175106 Scotch-Brite™ Belts 39AN019199676 Scotch-Brite™ Belts 39AN019199858 Scotch-Brite™ Belts 39AN019208519 Scotch-Brite™ Belts 39AN019208519 Scotch-Brite™ Belts 39AN019208840 Scotch-Brite™ Belts 39AN019208857 Scotch-Brite™ Belts 39AN019208873 Scotch-Brite™ Belts 39AN019208881 Scotch-Brite™ Belts 39AN019208931 Scotch-Brite™ Belts 39AN019209418 Scotch-Brite™ Belts 39AN019209426 Scotch-Brite™ Belts 39AN019209913 Scotch-Brite™ Belts 39AN019210390 Scotch-Brite™ Belts 39AN019210663 Scotch-Brite™ Belts 39AN019210671 Scotch-Brite™ Belts 39AN019211216 Scotch-Brite™ Belts 39AN019211786 Scotch-Brite™ Belts 39AN019213402 Scotch-Brite™ Belts 39AN019213733 Scotch-Brite™ Belts 39AN019214435 Scotch-Brite™ Belts 39AN019219367 Scotch-Brite™ Belts 39AN019224532 Scotch-Brite™ Belts 39AN019225083 Scotch-Brite™ Clean and Finish Disc 23AN019227741 Scotch-Brite™ Belts 39AN019228426 Scotch-Brite™ Belts 39AN019236544 Scotch-Brite™ Belts 39AN019246238 Scotch-Brite™ Belts 39AN019251592 Scotch-Brite™ Belts 39AN019251634 Scotch-Brite™ Belts 39AN019300647 Scotch-Brite™ Belts 39AN019301991 Scotch-Brite™ Belts 39AN019302908 3M™ Cloth Belts 577F 35AN019302916 3M™ Cloth Belts 577F 35AN019302924 3M™ Cloth Belts 577F 35AN019302932 3M™ Cloth Belts 577F 35AN019302957 3M™ Cloth Belts 577F 35AN019302965 3M™ Cloth Belts 577F 35AN019302981 3M™ Cloth Belts 577F 35AN019303013 3M™ Cloth Belts 577F 35AN019303021 3M™ Cloth Belts 577F 35AN019303054 3M™ Cloth Belts 577F 35AN019303062 3M™ Cloth Belts 577F 35AN019303088 3M™ Cloth Belts 577F 35AN019303096 3M™ Cloth Belts 577F 35AN019303104 3M™ Cloth Belts 577F 35AS010558281 3M™ Perfect-It™ Compounds 56AT010581521 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 65DC272921198 3M™ Hi-Flex Sanding Sponges 29DC272921404 3M™ Fibre Disc Back Up Pads & Extended Retaining Nut 64DC272922360 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 65DC272922386 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 65DC272923988 3M™ Hookit™ Interface Pads for Clean Sand & Dust Extraction Systems 65
DC272923996 3M™ Hookit™ Interface Pads for Clean Sand & Dust Extraction Systems 65DC272924317 3M™ Sanding Block 29DC272924325 3M™ Sanding Block 29DC272924366 3M™ Hi-Flex Sanding Sponges 29DC272924598 3M™ Hookit™ Disc Pads and Holders for Clean Sand & Dust Extraction Systems 65DE272906178 3M™ Hook & Loop Disc Pads and Holders 64DE272906186 3M™ Hook & Loop Disc Pads and Holders 64DE272923777 3M™ High Pressure Fibre Disc Back Up Pads 64DE272923785 3M™ High Pressure Fibre Disc Back Up Pads 64DN999983021 3M™ Hook & Loop Disc Pads and Holders 64FC110027446 3M™ Soft Back Sanding Sponges 30FC110027453 3M™ Soft Back Sanding Sponges 30FN510078085 Scotch-Brite™ Clean and Strip Discs (Shaft Mounted) 41FN510078242 Scotch-Brite™ Roloc™+ Cut and Polish Unitised Wheel 43FN510078267 Scotch-Brite™ Clean and Strip Discs (Shaft Mounted) 41FN510078317 Scotch-Brite™ Roloc™+ Cut and Polish Mop 43FN510078341 Scotch-Brite™ Roloc™+ Clean and Finish Flap Brush 42FN510078366 Scotch-Brite™ Clean and Strip Discs (Shaft Mounted) 41FN510078390 Scotch-Brite™ Roloc™+ Cut and Polish Unitised Wheel 43FN510078440 Scotch-Brite™ Roloc™+ Clean and Finish Flap Brush 42FN510078473 3M™ Roloc™+ Holders 67FN510078481 Scotch-Brite™ Roloc™+ Cut and Polish Unitised Wheel 43FN510078499 Scotch-Brite™ Roloc™+ Combination Flap Brush 42FN510078507 Scotch-Brite™ Clean and Strip Discs (Shaft Mounted) 41FN510078556 Scotch-Brite™ Roloc™+ Combination Flap Brush 42FN510078564 3M™ Roloc™+ Holders 67FN510078580 Scotch-Brite™ Roloc™+ Cut and Polish Unitised Wheel 43FN510078705 Scotch-Brite™ Clean and Strip Discs (Shaft Mounted) 41FN510078713 Scotch-Brite™ Roloc™+ Cut and Polish Mop 43FN510078788 Scotch-Brite™ Roloc™+ Cut and Polish Mop 43FN510078853 Scotch-Brite™ Clean and Strip Discs (Shaft Mounted) 41FN510078929 Scotch-Brite™ Roloc™+ Clean and Finish Flap Brush 42FN510079422 Scotch-Brite™ Clean and Strip Discs (Depressed Centre) 15FN510080073 Scotch-Brite™ Roloc™+ Cut and Polish Flap Brush 42GC074316016 3M™ Wetordry™ Paper Sheets 28GC074317014 3M™ Wetordry™ Paper Sheets 28GC074318012 3M™ Wetordry™ Paper Sheets 28GC074319010 3M™ Wetordry™ Paper Sheets 28GC074324010 3M™ Wetordry™ Paper Sheets 28GC074326015 3M™ Wetordry™ Paper Sheets 28GC074327013 3M™ Wetordry™ Paper Sheets 28GC074390011 3M™ Wetordry™ Paper Sheets 28GC074391019 3M™ Wetordry™ Paper Sheets 28GC223140077 3M™ Wetordry™ Paper Sheets 28GC223140093 3M™ Wetordry™ Paper Sheets 28GC223140101 3M™ Wetordry™ Paper Sheets 28GC223140127 3M™ Wetordry™ Paper Sheets 28GC223140143 3M™ Wetordry™ Paper Sheets 28GC223140168 3M™ Wetordry™ Paper Sheets 28GC800316470 3M™ Wetordry™ Paper Sheets 28GC800316496 3M™ Wetordry™ Paper Sheets 28GC800316512 3M™ Wetordry™ Paper Sheets 28GC800449396 3M™ Hookit™ Green Paper Disc (With Dust Extraction) 19GC800454636 3M™ Hookit™ Gold Paper Sheets 25GC800454669 3M™ Hookit™ Gold Paper Sheets 25GC800454693 3M™ Hookit™ Gold Paper Sheets 25GC800454701 3M™ Hookit™ Gold Paper Sheets 25GC800454719 3M™ Hookit™ Gold Paper Sheets 25GC800454750 3M™ Hookit™ Gold Paper Sheets 25GC800454776 3M™ Hookit™ Gold Paper Sheets 25GC800454784 3M™ Hookit™ Gold Paper Sheets 25GC800454834 3M™ Hookit™ Gold Paper Sheets 25GC800454842 3M™ Hookit™ Gold Paper Sheets 25GC800487842 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC800487867 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC800487966 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC800492578 3M™ Hookit™ Gold Paper Sheets 25GC800494541 3M™ Hookit™ Gold Paper Sheets 25GC800497585 3M™ Hookit™ Gold Paper Sheets 25GC800497601 3M™ Hookit™ Gold Paper Sheets 25GC800504711 3M™ Hookit™ Gold Paper Disc (No Dust Extraction) 22GC800504729 3M™ Hookit™ Gold Paper Disc (No Dust Extraction) 22GC800504745 3M™ Hookit™ Gold Paper Disc (No Dust Extraction) 22GC800504760 3M™ Hookit™ Gold Paper Disc (No Dust Extraction) 22GC800504786 3M™ Hookit™ Gold Paper Disc (No Dust Extraction) 22GC800504794 3M™ Hookit™ Gold Paper Disc (No Dust Extraction) 22GC800504802 3M™ Hookit™ Gold Paper Disc (No Dust Extraction) 22GC800504828 3M™ Hookit™ Gold Paper Disc (No Dust Extraction) 22GC800512268 3M™ Hookit™ Gold Paper Sheets 25GC800594860 3M™ Hookit™ Gold Paper Roll 26GC800633866 3M™ Hookit™ Gold Paper Roll 26GC800708015 3M™ Gold Paper Sheets 28GC800731777 3M™ Gold Paper Sheets 28GC800731827 3M™ Gold Paper Sheets 28GC800734110 3M™ Gold Paper Roll 25GC800736263 3M™ Hookit™ Gold Paper Roll 26GC800738400 3M™ Hookit™ Gold Paper Roll 26GC800738442 3M™ Hookit™ Gold Paper Roll 26GC800738467 3M™ Hookit™ Gold Paper Roll 26GC800745835 3M™ Gold Paper Roll 25GC800966365 3M™ Hookit™ Gold Paper Roll 26GC800966415 3M™ Hookit™ Gold Paper Roll 26GC800966423 3M™ Hookit™ Gold Paper Roll 26
iNdeX | Abrasive systems
Index
74 iNdeX | Abrasive systems
Index
GC800966431 3M™ Hookit™ Gold Paper Roll 26GC800966449 3M™ Hookit™ Gold Paper Roll 26GC800973163 3M™ Hookit™ Green Paper Disc (With Dust Extraction) 19GC800973171 3M™ Hookit™ Green Paper Disc (With Dust Extraction) 19GC800973189 3M™ Hookit™ Green Paper Disc (With Dust Extraction) 19GC800984558 3M™ Fibre Disc 581C 15GC800984566 3M™ Fibre Disc 581C 15GC800984574 3M™ Fibre Disc 581C 15GC800984582 3M™ Fibre Disc 581C 15GC800984590 3M™ Fibre Disc 581C 15GC800984608 3M™ Fibre Disc 581C 15GC800984616 3M™ Fibre Disc 581C 15GC800984632 3M™ Fibre Disc 581C 15GC800984665 3M™ Fibre Disc 581C 15GC800984681 3M™ Fibre Disc 581C 15GC800984699 3M™ Fibre Disc 581C 15GC800984707 3M™ Fibre Disc 581C 15GC800984731 3M™ Fibre Disc 581C 15GC800984749 3M™ Fibre Disc 581C 15GC800989631 3M™ Hookit™ Finishing Film Discs (With Dust Extraction) 21GC800989649 3M™ Hookit™ Finishing Film Discs (With Dust Extraction) 21GC800989730 3M™ Hookit™ Finishing Film Discs (With Dust Extraction) 21GC800989748 3M™ Hookit™ Finishing Film Discs (With Dust Extraction) 21GC801005445 3M™ Gold Soft Hand Rolls 29GC801005460 3M™ Gold Soft Hand Rolls 29GC801005486 3M™ Gold Soft Hand Rolls 29GC801005502 3M™ Gold Soft Hand Rolls 29GC801005510 3M™ Gold Soft Hand Rolls 29GC801005528 3M™ Gold Soft Hand Rolls 29GC801005536 3M™ Gold Soft Hand Rolls 29GC801010247 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801010254 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801010262 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801010270 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801010288 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801010296 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801010304 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801010312 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801010338 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801010353 3M™ Hookit™ Gold Paper Disc (With Dust Extraction) 20GC801023778 3M™ Gold Paper Sheets 28GC801023786 3M™ Gold Paper Sheets 28GC801023794 3M™ Gold Paper Sheets 28GC801023802 3M™ Gold Paper Sheets 28GC801023810 3M™ Gold Paper Sheets 28GC801023828 3M™ Gold Paper Sheets 28GC801023844 3M™ Gold Paper Sheets 28GC801023943 3M™ Gold Paper Roll 25GC801023950 3M™ Gold Paper Roll 25GC801023976 3M™ Gold Paper Roll 25GC801023992 3M™ Gold Paper Roll 25GC801024032 3M™ Gold Paper Roll 25GC801024040 3M™ Gold Paper Roll 25GC801027860 3M™ Stikit™ Paper Discs (No Dust Extraction) 24GC801027878 3M™ Stikit™ Paper Discs (No Dust Extraction) 24GC801027886 3M™ Stikit™ Paper Discs (No Dust Extraction) 24GC801027894 3M™ Stikit™ Paper Discs (No Dust Extraction) 24GC801027902 3M™ Stikit™ Paper Discs (No Dust Extraction) 24GC801027928 3M™ Stikit™ Paper Discs (No Dust Extraction) 24GC801027936 3M™ Stikit™ Paper Discs (No Dust Extraction) 24GC801032308 3M™ Hookit™ Paper Disc (With Dust Extraction) 20GC801032316 3M™ Hookit™ Paper Disc (With Dust Extraction) 20GC801032324 3M™ Hookit™ Paper Disc (With Dust Extraction) 20GC801032332 3M™ Hookit™ Paper Disc (With Dust Extraction) 20GC801032357 3M™ Hookit™ Paper Disc (With Dust Extraction) 20GC801032373 3M™ Hookit™ Paper Disc (With Dust Extraction) 20GC801032399 3M™ Hookit™ Paper Disc (With Dust Extraction) 20GC801032407 3M™ Hookit™ Paper Disc (With Dust Extraction) 20GC801032415 3M™ Hookit™ Paper Disc (With Dust Extraction) 20GC80106727 3M™ Hookit™ Finishing Film Discs (With Dust Extraction) 21GC80106735 3M™ Hookit™ Finishing Film Discs (With Dust Extraction) 21GC80106743 3M™ Hookit™ Finishing Film Discs (With Dust Extraction) 21GC80106750 3M™ Hookit™ Finishing Film Discs (With Dust Extraction) 21GC80106768 3M™ Hookit™ Finishing Film Discs (With Dust Extraction) 21GN030104493 3M™ Hook & Loop Disc Pads and Holders 64GN030106126 3M™ Hook & Loop Disc Pads and Holders 64HC000399812 3M™ Cloth Belts 351A 36JN210016034 Scotch-Brite™ Light Deburring Wheel 47JN310001712 Scotch-Brite™ EXL Deburring Wheel 47JN310002603 Scotch-Brite™ EXL Deburring Wheel 47JN310004013 Scotch-Brite™ EXL Deburring Wheel 47JN390022166 Scotch-Brite™ EXL Unitised Wheel 44JN390061198 Scotch-Brite™ Light Deburring Wheel 47JN390061214 Scotch-Brite™ Light Deburring Wheel 47WN200031550 Scotch-Brite™ Hand Pads 31XA004114667 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA004114675 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA004114683 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA004114709 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA004114717 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA004114725 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA004114733 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA004114741 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA004181989 3M™ Hookit™ Purple Paper Disc - Clean Sand 19
XA006702006 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA006702014 3M™ Hookit™ Purple Paper Disc - Clean Sand 19XA100001313 3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum Systems 59XA100001321 3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating Vacuum 59XA100001396 3M™ Elite Series Air-Powered Random Orbital Sanders – Non Vacuum Systems 59XA100001404 3M™ Elite Series Air-Powered Random Orbital Sanders – Central Vacuum Systems 59XA100001412 3M™ Elite Series Air-Powered Random Orbital Sanders – Self Generating Vacuum 59XA600057039 3M™ Superbuff™ Pads 69XB002000519 3M™ Type WA Flexible Grinding Discs 13XB002005527 3M™ Type WA Flexible Grinding Discs 13XB002005535 3M™ Type WA Flexible Grinding Discs 13XB002005592 3M™ Type WA Flexible Grinding Discs 13XC000777315 Scotch-Brite™ Clean and Strip Discs (Depressed Centre) 15XC000777323 Scotch-Brite™ Clean and Strip Discs (Depressed Centre) 15XC000777331 Scotch-Brite™ Clean and Strip Discs (Depressed Centre) 15XC000777349 Scotch-Brite™ Clean and Strip Discs (Depressed Centre) 15XC002031349 3M™ Green-Corps™ Flexible Grinding Discs 13XC002031356 3M™ Green-Corps™ Flexible Grinding Discs 13XC002032198 3M™ Green-Corps™ Flexible Grinding Discs 13XC002032206 3M™ Green-Corps™ Flexible Grinding Discs 13XC002032214 3M™ Green-Corps™ Flexible Grinding Discs 13XC002032222 3M™ Green-Corps™ Flexible Grinding Discs 13XC002032230 3M™ Green-Corps™ Flexible Grinding Discs 13XC002032248 3M™ Green-Corps™ Flexible Grinding Discs 13XC002032255 3M™ Green-Corps™ Flexible Grinding Discs 13XC002037304 3M™ Green-Corps™ Flexible Grinding Discs 13XC002057088 3M™ Green-Corps™ Rigid Grinding Discs 12XC002057393 3M™ Green-Corps™ Rigid Grinding Discs 12XC002057435 3M™ Type WA Rigid Grinding Discs 12XC002058714 3M™ Green-Corps™ Rigid Grinding Discs 12XC002058748 3M™ Green-Corps™ Rigid Grinding Discs 12XC002058755 3M™ Green-Corps™ Rigid Grinding Discs 12XC002058763 3M™ Type WA Rigid Grinding Discs 12XC002058771 3M™ Type WA Rigid Grinding Discs 12XC002062609 3M™ Thin Cut-Off Wheels 7XC002062617 3M™ Thin Cut-Off Wheels 7XC002062625 3M™ Thin Cut-Off Wheels 7XC002062641 3M™ Thin Cut-Off Wheels 7XC002065982 3M™ Cubitron™ II Cloth Belts 984F 34XC002065990 3M™ Cubitron™ II Cloth Belts 984F 34XC002066014 3M™ Cubitron™ II Cloth Belts 984F 34XC002066022 3M™ Cubitron™ II Cloth Belts 984F 34XC002066030 3M™ Cubitron™ II Cloth Belts 984F 34XC002066048 3M™ Cubitron™ II Cloth Belts 984F 34XC002066063 3M™ Cubitron™ II Cloth Belts 984F 34XC002066071 3M™ Cubitron™ II Cloth Belts 984F 34XC002066089 3M™ Cubitron™ II Cloth Belts 984F 34XC002066113 3M™ Cubitron™ II Cloth Belts 984F 34XC002066139 3M™ Cubitron™ II Cloth Belts 984F 34XC002066147 3M™ Cubitron™ II Cloth Belts 984F 34XC002066154 3M™ Cubitron™ II Cloth Belts 984F 34XC002066162 3M™ Cubitron™ II Cloth Belts 984F 34XC002066188 3M™ Cubitron™ II Cloth Belts 984F 34XC002066196 3M™ Cubitron™ II Cloth Belts 984F 34XC002066204 3M™ Cubitron™ II Cloth Belts 984F 34XC002066212 3M™ Cubitron™ II Cloth Belts 984F 34XC002066246 3M™ Cubitron™ II Cloth Belts 984F 34XC002066253 3M™ Cubitron™ II Cloth Belts 984F 34XC002066261 3M™ Cubitron™ II Cloth Belts 984F 34XC002066287 3M™ Cubitron™ II Cloth Belts 984F 34XC002066303 3M™ Cubitron™ II Cloth Belts 984F 34XC002066329 3M™ Cubitron™ II Cloth Belts 984F 34XC002066337 3M™ Cubitron™ II Cloth Belts 984F 34XC002066345 3M™ Cubitron™ II Cloth Belts 984F 34XC002066352 3M™ Cubitron™ II Cloth Belts 984F 34XC002066360 3M™ Cubitron™ II Cloth Belts 984F 34XC002066378 3M™ Cubitron™ II Cloth Belts 984F 34XC002066386 3M™ Cubitron™ II Cloth Belts 984F 34XC002066428 3M™ Cubitron™ II Cloth Belts 984F 34XC002066436 3M™ Cubitron™ II Cloth Belts 984F 34XC002066485 3M™ Cubitron™ II Cloth Belts 984F 34XC002067178 3M™ Cubitron™ II Cloth Belts 984F 34XC002509476 3M™ Green-Corps™ Flexible Grinding Discs 13XC002509484 3M™ Green-Corps™ Flexible Grinding Discs 13XC002509500 3M™ Green-Corps™ Flexible Grinding Discs 13XC003406367 3M™ Soft Back Sanding Sponges 30XC003406375 3M™ Soft Back Sanding Sponges 30XC003406383 3M™ Soft Back Sanding Sponges 30XC003410039 3M™ Fibre Disc Back Up Pads & Extended Retaining Nut 64XC003410047 3M™ Fibre Disc Back Up Pads & Extended Retaining Nut 64XC003410104 3M™ Fibre Disc Back Up Pads & Extended Retaining Nut 64XC003410120 3M™ Hookit™ Interface Pads for Clean Sand & Dust Extraction Systems 65XN002138131 Scotch-Brite™ Multi-Purpose Unitised Wheel 48XN002138651 Scotch-Brite™ Multi-Purpose Unitised Wheel 48XS002000643 3M™ Superbuff™ Pads 69
Order ID Product Name Page Order ID Product Name Page
3M Australia Pty LimitedAbrasive Systems Division
3M New Zealand LtdAbrasive Systems Division