Date post: | 05-Mar-2016 |
Category: |
Documents |
Upload: | anticaidascom |
View: | 223 times |
Download: | 4 times |
P R O D U C T L I S T 2 0 1 3
Legend:
Particularly heavy or bulky products. Additional delivery costs apply.
Quick link to the product / product details. For smart-phones/tablets equipped with a barcode scanner
2
Above: Königspalast Krefeld - 1 km-long fall protection cabling system fixed to the girders
Left: Dusseldorf Central Station - 6 km-long cabling system, partly installed on the platform roofs
Center: Federal highway A4 near Jena - cabling swystems installed along all 3 sound barrier levels
Right: Duisburg Landscape Park - fall arrest system installed along the maintenance catwalks and over the retractable glass roof
P R O D U C T L I S T 2 0 1 3 3
Explanations ............................................................................4 Understanding ABS-Lock product numbers ........................................ 4
How to choose the correct anchorage point length ............................. 4
Anchorage points for individuals ..................................5-11 ABS-Lock® III ................................................................................. 5-6
ABS-Lock® III-R ................................................................................. 7
ABS-Lock® X-SR ................................................................................ 8
ABS-Lock® X-Trapez ........................................................................... 9
ABS-Lock® X for many different surfaces ..................................... 10-11
Penetration-free roof anchorage points ........................ 12 ABS-Lock® EG250 ..........................................................................12
ABS-Lock® EG260 ..........................................................................12
ABS-Lock OnTop®............................................................................12
Anchorage solutions for pitched roofs ........................... 13 ABS-Lock® SD ................................................................................13
ABS-Lock® DH05, DH04, DH03-Falz ................................................13
Anchorage points for metal seam roofs .................. 14-15 ABS-Lock® Falz IV ...........................................................................14
ABS-Lock® Falz III, Falz V .................................................................15
Overview: Devices for seam roof profiles .........................................15
Fall protection Lifeline cabling systems .................. 16-19 ABS-Lock® SYS I .............................................................................16
“SYS-Agenda” and installation park .................................................16
ABS-Lock® SYS II ............................................................................17
ABS-Lock® SYS III / IV ....................................................................18
More Lifeline system components & cable gliders ...........................19
Vertical lifeline ...................................................................... 20 ABS-Lock® SafetyHike .....................................................................20
Rail systems ........................................................................... 21 ABS-Lock® RailTrax .........................................................................21
Anchorage points for windows ...................................22-23 ABS-Lock® I+II ................................................................................22
ABS-Lock® I+II Accessories .............................................................23 More anchorage points .......................................................23 ABS-Lock® IV ..................................................................................23
ABS-Lock® V ...................................................................................23
ABS-Lock® VI ..................................................................................23
ABS-Lock® T ...................................................................................23
Horizontal rail guards ......................................................... 24 ABS Stabilik ...................................................................................24
Roof safety accessories ......................................................25 ABS SkyDome ................................................................................25
ABS BorderMark .............................................................................25
ABS RoofWay .................................................................................25
Window guards / ladder securing devices ................... 26 ABS FSG / FAS ...............................................................................26
ABS LaddFix / LaddQuick ...............................................................26
Mobile anchorage points ....................................................27 ABS CradleGuard® ..........................................................................27
ABS RunBeam® ..............................................................................27
ABS Safety door traverse ................................................................27
ABS-Lock® T-Quick ..........................................................................27
Personal protective equipment (PPE) .....................28-29 ABS ASK 8, lanyards, harnesses .....................................................28
PPE sets, storage, retractable lifelines .............................................29
Accessories .......................................................................30-31 ABS Therm, collars .........................................................................30
Installation accessories, telescope rods ..........................................31
Ludwig BeckersExecutive Director
... especially when it comes to safe-
ty at work. The ABS Safety GmbH
specializes in the field of fall arrest
systems for individuals. We are your
competent partner when it comes
to planning, sales, installation and
customer service. Our products are
innovative developments manuf. in
accordance with the latest produc-
tion methods and standards - most of
which are patented or protected de-
signs. These innovations can be im-
plemented virtually anywhere where
the danger of falling is high, e.g.
roofs, windows, building frontages,
machines, crane ways, maintenance
halls for trains, buses, planes and
many more. As a result of our mem-
bership in the standards committee
and the opportunities we have for
performing professional analyses, our
company has become a trend-setter
in the field of fall arrest. We can of-
fer our customers specially-designed,
complex solutions - even for difficult
surfaces, such as trapezoidal sheet-
ing, wood and pumice etc. As a result
of our own continuous controls and
monitoring by the DEKRA Exam GmbH
test institute, we are able to offer top
quality and safety at a fair price.
Put us to the test!
ON THE SAFE SIDE ...
4 P R O D U C T L I S T 2 0 1 3
Thermal insulation (incl. membrane):
80 mm170 mm230 mm280 mm
+150mm
230 mm320 mm380 mm430 mm
Result - rounded up:
300 mm400 mm400 mm500 mm
L3 B- - -300 100Product group,
e.g.L3 = ABS-Lock III
Type of installation / surface
e.g.B = Beton (concrete)
Protrusion (mm) = length of anchorage point above surface
Length of thread (mm) needed for installation
Explanation: How to choose the correct anchorage point length:
The following general rule applies:
Thermal insulation depth (incl. roof membrane) + 150mm, rounded up to the nearest 100mm.
This ensures that the anchorage point protrudes at least 150mm above the aquifer level - but no more than ~300mm.
Example: ABS-Lock X-SR installed in concrete
Sample calculations:
Should you require a special custom-size component not included in our product list, please ask us. Please provide appropriate details as to the installation environment and/or respective values
Understanding ABS-Lock III, X, X-SR, I+II product numbers
Anchorage pointlength
150-300mm above the aquifer level
Thermal insulation and roof membrane
Mounting surface
i
300
100
L3
B
IMPORTANT: Prior to using the components please read the Installation and User Manual!
L3-B-0-100L3-B-0-XXXL3-B-50-100
L3-B-100-100L3-B-200-100L3-B-300-100L3-B-400-100L3-B-500-100L3-B-600-100L3-B-xxx-100
L3-ST-0-100L3-ST-100-100L3-ST-300-100L3-ST-400-100L3-ST-500-100L3-ST-600-100L3-ST-xxx-100
L3-H-300L3-H-400L3-H-500L3-H-XXX
L3-HW-0-250L3-HW-100-300L3-HW-200-300L3-HW-300-300L3-HW-400-300L3-HW-500-300L3-HW-xxx-300
L3-BE-300L3-BE-400L3-BE-500L3-BE-600
L3-BE-EH
Preis je stk. | je Ve PrODUCT DesCriPTiON OrDer NO.
5P R O D U C T L I S T 2 0 1 3
ABS-Lock® III-B (walls and overhead installation)Stainless steel anchorage point for cementing into concrete, tested acc. to
EN 795 for simultaneous usage by 3 pers. Also licensed as a linfeline system
supp. acc. to EN 795 cl. C. Ø 16mm.
For hammering into concrete: C20/25 (B25)
For walls, facades & overhead implementation
Please note: If you are planning to install the device in masonry, please check
with ABS first.
ABS-Lock® III-B (flat roofs) Stainless steel anchorage point for doweling into concrete, tested acc. to EN
795 for 3 pers., suitable as an intermediate support in lifeline systems.
For doweling into concrete: C20/25 (B25)
For use on flat roofs, supp.: Ø16mm
Important for lifeline systems: For use as an end or corner support in a lifeline
system, please use our LX-SR-B-XXX (page 8).
ABS-Lock® III-BE (flat roofs) Stainl. steel anchorage point for hammering into concrete, tested acc. to EN 795,
lic. for 3 pers., also suitable as an interm. supp. in a lifel. system Important: For
use as an end or corner support in a lifel. system, pls. use our LX-SR-B-XXX.
For flat concrete roof surfaces - C20/25 (B25) and above, supp.: Ø16mm
Stainless steel hammering aid BEPrevents damage to the thread when the hammer is wrongly aimed.
ABS-Lock® III-ST Stainl. steel anchorage point for bolting onto steel, tested acc. to EN 795, lic.
for 3 pers., also suitable as an intermediate support in a lifeline system.
For steel structures / strut & bracket connections
With or without protrusion, for roofs, walls, facades or overhead usage
Incl. installation mat.
Please note: For use as an end or corner bracket: Please consult ABS.
ABS-Lock® III-HW Stainl. steel anchorage point – inserted through wood, tested acc. to EN 795,
lic. for 3 pers., also suitable as an intermediate support in a lifeline system.
For load-bearing wooden structures
Device is inserted through a hole drilled through the wood and then countered
For beams ≥ 100x120mm
Incl. installation mat.
ABS-Lock® III-HStainl. steel anchorage point for screwing into wood, tested acc. to EN 795,
lic. for 3 pers., also suitable as an intermediate support in a lifeline system.
For load-bearing wooden structures
Installed using a Ø13mm pre-drilled hole
For beams ≥ 60x120mm - paneled
For beams size 60x120mm and upwards - not paneled
ABS-Lock® III Anchorage points for individuals Group A
L3-TSEIT-300L3-TSEIT-400L3-TSEIT-500
L3-SEITL-100-25L3-SEITL-200-25L3-SEITL-300-25L3-SEITL-400-25L3-SEITL-500-25
L3-SEITL-200-65L3-SEITL-300-65L3-SEITL-400-65L3-SEITL-500-65L3-SEITL-600-65
L3-STÜTZR-XXX
L3-V-100L3-V-200
PrODUCT DesCriPTiON OrDer NO.
6 P R O D U C T L I S T 2 0 1 3
IMPORTANT: Prior to using the components please read the Installation and User Manual!
ABS-Lock® III-TSEITStainl. steel anchorage point specially designed as a single anchorage point for
lateral inst. in masonry and wooden structures, with welded-on base plate. Tes-
ted acc. to EN 795 for 3 pers., also suitable as an interm. supp. in a lifel. syst.
Base plate at 90° angle to the support, size: 160x50mm
For beams ≥ 50mm wide
Incl. installation mat.
ABS-Lock® III-SEITL-25 Stainl. steel anchorage point for lateral inst. in masonry, steel and wooden
structures, tested acc. to EN 795 for 3 pers., can be fitted with a supporting
tube (L3-STÜTZR-XXX) designed for end and corner supports (lifeline system)
Installed using an angle plate and 2 bore holes
Distance betw. bore hole and the wall: 25mm.
Incl. installation mat.
ABS-Lock® III-SEITL-65Stainl. steel anchorage point for lateral inst. in masonry, steel and wooden
structures, tested acc. to EN 795 for 3 pers., can be fitted with a supporting
tube (L3-STÜTZR-XXX) designed for end and corner supports (lifeline system)
Installed using an angle plate and 2 bore holes
Distance betw. bore hole and the wall: 65mm.
Incl. installation mat.
Supporting tube for ABS-Lock® IIIStainl. steel reinforcing tube, incl. force absorber, fits many protruding ABS-
Lock® III models. Must be used to support the ends and corners in a linfeline
system.
For roof, wall, facade and overhead systems. Ø 42mm supp., XXX = protrus.
Can also be installed in concrete
In special cases (facade systems)
ABS-Lock® III extensionCompl. ext. length: 100mm, resp. 200mm, consisting of a stainl. steel sleeve
socket & stainl. steel anchorage eyelet, incl. installation mat.
Group AABS-Lock® III Anchorage points for individuals
L3-ST-0-18-R-M12L3-ST-0-24-R-M16L3-ST-0-30-R-M20
L3-ST-0-50-R-M16
L3-B-0-80-R-M16
PrODUCT DesCriPTiON OrDer NO.
7P R O D U C T L I S T 2 0 1 3
ABS-Lock® III-R for steel (screwed in)Stainl. steel anchorage point (V4A), anchorage eyelet rotates 360°, screwed
into steel using pre-installed threads, tested acc. to EN 795 for 3 pers., also
EN 50308 and GL-tested.
Avail. in 3 diff. sizes:
Thread lengths M12x18mm, M16x24mm, M20x30mm
Incl. specific. plate and installation mat.
Color: RAL 1003 (yellow, powder-coated) More colors avail. upon request
ABS-Lock® III-R for steel (countered)Stainl. steel anchorage point (V4A), anchorage eyelet rotates 360°, screwed
into steel/countered (pre-drilled), tested acc. to EN 795 for 3 pers., also EN
50308 and GL-tested.
Standard size: M16x50mm
Incl. specific. plate and installation mat.
Color: RAL 1003 (yellow, powder-coated) More colors avail. upon request
ABS-Lock® III-R for concreteStainl. steel anchorage point (V4A), anchor eyelet rotates 360°, cemented into
concrete using 2-comp. adhesive (e.g . Würth WIT- C100, Hilti HIT, Fischer FIS
V), tested acc. to EN 795 for 3 pers., also EN 50308 and GL-tested.
Standard size: M16x80mm
Incl. specific. plate, adhesive not supp./not incl. in the price
Color: RAL 1003 (yellow, powder-coated) More colors avail. upon request
ABS-Lock® III-R Fitted with a freely rotating ring eyelet Group A
360°
M12 M16 M20ANCHORAGE EYELET ROTATES
P R O D U C T L I S T 2 0 1 3
LX-SR-B-300LX-SR-B-400LX-SR-B-500LX-SR-B-600LX-SR-B-700LX-SR-B-800LX-SR-B-900LX-SR-B-1000
LX-SR-B-300-ALX-SR-B-400-ALX-SR-B-500-ALX-SR-B-600-ALX-SR-B-700-ALX-SR-B-800-ALX-SR-B-900-ALX-SR-B-1000-A
LX-SR-ST-300LX-SR-ST-400LX-SR-ST-500LX-SR-ST-600LX-SR-ST-700LX-SR-ST-800LX-SR-ST-900LX-SR-ST-1000
LX-SR-HD-300LX-SR-HD-400LX-SR-HD-500LX-SR-HD-600LX-SR-HD-700LX-SR-HD-800
LX-SR-VERL-100LX-SR-VERL-200LX-SR-VERL-XXX
PrODUCT DesCriPTiON OrDer NO.
8 P R O D U C T L I S T 2 0 1 3
IMPORTANT: Prior to using the components please read the Installation and User Manual!
ABS-Lock® X-SR Reinforced anchorage point with base plate Group A
ABS-Lock® X-SR for concrete (drive-in dowel) Anchorage point, reinforced for usage as an end bracket in a safety lifeline sys-
tem, tested acc. to EN 795 for 3 pers. Supp. Ø42mm. Manufactured completely
from stainl. steel (1.4301). Installed using 4 heavy duty dowels.
For concrete B25, C20/25 and above
Base plate: 150x150mm
Incl. installation mat.
ABS-Lock® X-SR for concrete (anchor rods)Anchorage point, reinforced for usage as an end bracket in a lifeline system,
tested acc. to EN 795 for 3 pers. Supp. Ø42mm. Manuf: completely from stainl.
steel (1.4301). Installed using 4 cement anchor rods and 2-comp. adhesive
(e.g . WIT-C100, Hilti HIT, Fischer FIS V).
For concrete B25, C20/25 and above
Base plate: 150x150mm
Incl. installation mat., adhesive not incl. in the price
ABS-Lock® X-SR for steelAnchorage point, reinforced for use as an end support in a lifeline system, tes-
ted acc. to EN 795 for 3 pers. Support Ø42mm. Manufactured completely from
stainl. steel (1.4301). Installed using 4 stainl. steel bolts and counter nuts.
For steel structures/strut & bracket connections
Base plate: 150x150mm
Incl. installation mat.
ABS-Lock® X-SR for suspended ceilingsAnchorage point, reinforced for use as an end support in a lifeline system, tes-
ted acc. to EN 795 for 3 pers. Supp. Ø42mm. Manufactured completely from
stainl. steel (1.4301). Installed using 4 expansion anchors (expansion dowels)
at the thinnest web point.
For concrete B35, C30/25 and above
Base plate: 150x150mm
Incl. installation materials
ABS-Lock® X-SR extensionExtension tube for all ABS-Lock X-SR supports. Installed where anchor eyelet is
normally attached. Stainl. steel (1.4301). Incl. force absorber and pre-determi-
ned breaking point. Ø42mm
Incl. installation mat. and ring nut
Standard lengths: 100 and 200mm
Special lengths: See XXX model.
100200XXX
P R O D U C T L I S T 2 0 1 3
LX-T-150LX-T-300LX-T-400LX-T-500LX-T-600
LX-T-300-AL
LX-SW-150LX-SW-300LX-SW-400
LX-T-WDO-150LX-T-WDO-300LX-T-WDO-XXX
PrODUCT DesCriPTiON OrDer NO.
9P R O D U C T L I S T 2 0 1 3
ABS-Lock® X-TrapezStainl. steel anchorage point for metal trapezoidal sheeting (positive & negative
positions), tested acc. to EN 795 for simultaneous use by 3 pers. Can also be
used as a system support (end, corner or intermediate) in a lifeline system acc.
to EN 795, cl. C.
For steel plating ≥ 0.63mm, base plate 290x200mm, supp. Ø16mm
For upright rib intervals (center to center) of 180 to 280mm
Incl. installation mat. (4 spec. toggle bolts)
ABS-Lock® X-T-ALUStainl. steel anchorage point for alum. trapezoidal sheeting, tested acc. to EN
795 for simultaneous use by 3 pers. Also suitable as a support (end, corner or
intermediate) in a lifeline system acc. to EN 795, cl. C.
For aluminum plating ≥ 0.7mm, base plate 375x375mm, supp. Ø16mm
For 335mm upright rib intervals (center to center)
Incl. installation mat. (6 special toggle bolts)
ABS-Lock® X-Sandwich Stainl. steel anchorage point for sandwich profiles, tested acc. to EN 795 for
3 pers. simultaneous. Also suitable for use as a system support (end, corner
or intermediate) in a lifeline system acc. to EN 795, cl. C
For steel plating ≥ 0.5mm, base plate 372x200mm, supp. Ø16mm
For upright rib intervals (center to center) of 280 to 333mm
Incl. installation mat. (4 special toggle bolts)
The aBove PRodS. can Be fiTTed wiTh a SuPPoRT TuBe (LX-STÜTZR-XXX, P. 11) foR uSaGe aS an end oR coRneR SuPPoRT in a LifeLine SySTem!
ABS-Lock® X-T-WDOStainl. steel anchorage point for metal trapezoidal sheeting with on-top insu-
lation mat., tested acc. to EN 795 for 3 pers. Insulation mat. is bridged using
spacer sleeves. Please check with ABS that device can be used.
For steel plating ≥ 0.63mm, base plate 290x200mm, support Ø16mm
For upright rib intervals (center to center) of 180 to 280mm
Incl. installation mat. (4 special toggle bolts)
ABS-Lock® X Solutions for metal roofs Group A
INSTALL ON TRAPEZOIDAL SHEETING
10 P R O D U C T L I S T 2 0 1 3
LX-B-300LX-B-400LX-B-500LX-B-XXX
LX-ST-150LX-ST-300LX-ST-400LX-ST-500LX-ST-XXX
LX-AUFSCHW-200LX-AUFSCHW-300LX-AUFSCHW-400LX-AUFSCHW-500LX-AUFSCHW-XXX
LX-KLEMM-150LX-KLEMM-300LX-KLEMM-400LX-KLEMM-500LX-KLEMM-XXX
LX-SOLAR-150
LX-DURCH-150LX-DURCH-300LX-DURCH-400LX-DURCH-500LX-DURCH-600LX-DURCH-XXX
PrODUCT DesCriPTiON OrDer NO.
IMPORTANT: Prior to using the components please read the Installation and User Manual!
ABS-Lock® X Anchorage point with adjustable base plate Group A
ABS-Lock® X-BStainl. steel anchorage point with base plate for doweling into concrete, tested
acc. to EN 795 for 3 pers. simult. Also lic. as a system supp. in a lifeline system
acc. to EN 795, cl. C, when fitted with opt. supp. tube (LX-STÜTZR-XXX, p. 11)
For concrete B25, C20/25 and above, base plate: 200x200mm
Incl. installation mat. Support diameter Ø16mm
Also available without dowel set for cementing in!
ABS-Lock® X-STStainl. steel anchorage point with base plate for bolting onto steel structures,
tested acc. to EN 795 for 3 pers. Also lic. as a system supp. in a lifeline system
acc. to EN 795, cl. C, when fitted with opt. supp. tube (LX-STÜTZR-XXX, p. 11).
For steel structures/strut & bracket connections
Base plate: 200x200mm
Incl. installation mat. (4 bolts w. counter nuts)
ABS-Lock® X-Aufschw (welding)Stainl. steel anchorage point w. base plate for welding onto steel structures,
tested acc. to EN 795 for 3 pers. Also lic. as a system supp. in a lifeline system
acc. to EN 795, cl. C, when fitted with opt. supp. tube (LX-STÜTZR-XXX, p. 11).
For steel structures/strut & bracket connections
Base plate: 80x80mm (more sizes avail. upon request), supp.: Ø16mm
ABS-Lock® X-Klemm (clamp)Anchorage point with base and counter plates designed for clamping, tested acc.
to EN 795 for 3 pers. Also licensed as a system supp. in a lifeline system acc.
to EN 795, cl. C, when fitted with optional supp. tube (LX-STÜTZR-XXX, p. 11).
For wooden & concrete beams/steel girders
Base plate: 200x200mm (more sizes avail. upon request), supp. Ø16mm
Incl. installation mat. (4x V2A threaded bolts)
ABS-Lock® X-SolarStainl. steel anchorage point with base and counter plates, for clamping onto a
solar panel bracket, tested acc. to EN 795 for 1 pers. You must check prior to
installation whether the substructure is capable of absorbing the ensuing force.
For aluminum and other profiles up to max 50x50mm
Base plate: 100x100mm, supp. Ø16mm, Length: 150mm
Incl. installation mat.
ABS-Lock® X-Durch (push-through)Stainl. steel anchorage point w. base and counter plates for push-through ins-
tallation, tested acc. to EN 795 for 3 pers. Also licensend for use as a system
supp. in a lifeline system acc. to EN 795, cl. C.
Pushed through walls, hollow profiles & lightweight concrete
Cross-shaped base plate: 200x200mm, supp. Ø42mm
Incl. installation mat., counter plate & supp. tube
Please note: Pls. quote the ceiling depth/clamping zone when ordering.
Clamping zone
11P R O D U C T L I S T 2 0 1 3
LX-STÜTZR-XXXLG-STÜTZR-XXX
LX-H-150-4LX-H-300-4LX-H-400-4LX-H-500-4
LX-H-150-8+2LX-H-300-8+2LX-H-400-8+2LX-H-500-8+2LX-H-600-8+2LX-H-XXX-8+2
LX-H-150-16LX-H-300-16LX-H-400-16LX-H-500-16LX-H-600-16LX-H-XXX-16
LX-Fi-200-XXLX-Fi-300-XXLX-Fi-400-XXLX-Fi-XXX-XX
PrODUCT DesCriPTiON OrDer NO.
ABS-Lock® X-H-8+2Stainl. steel anchorage point for wooden panels & rafters, tested acc. to EN 795
for simult. usage by 3 pers. Also lic. as a system supp. in a lifeline system acc.
to EN 795, cl. C, when fitted with opt. supp. tube (LX-STÜTZR-XXX, p. 11).
For wooden beams ≥ 6cm wide
Base plate 200x200mm, supp. Ø16mm
Incl. installation mat. (8 short & 2 long screws)
ABS-Lock® X-H-4Stainl. steel anchorage point for wooden structures, tested acc. to EN 795 for
simult. usage by 3 pers. Also lic. as a system supp. in a lifeline system acc. to
EN 795, cl. C, when fitted with opt. supp. tube (LX-STÜTZR-XXX, p. 11).
For wooden beams ≥ 10x12cm
Base plate 100x100mm, supp. Ø16mm
Incl. installation mat. (4 long screws)
ABS-Lock® X-H-16Stainl. steel anchorage point for wooden panels, tested acc. to EN 795 for
simult. usage by 3 pers. Also lic. as a system supp. in a lifeline system acc. to
EN 795, cl. C, when fitted with opt. supp. tube (LX-STÜTZR-XXX, p. 11).
For OSB wood panels ≥ 18mm, 24mm wooden panels
Base plate 200x200mm, supp. Ø16mm
Incl. installation mat. (16 screws)
ABS-Lock® X-FiStainl. steel anchorage point for attachment to the roof apex, tested acc. to EN
795 for 3 pers. simult. when fitted with opt. supp. tube (LX-STÜTZR-XXX, p. 11),
also licensed as a supp. in a lifeline system acc. to EN 795, cl. C.
Angular base plate 400x320mm w. 3 pre-set angles to choose from:
xx = 15°, 25°, 37°. which can all be bent a further +- 7.5°
Adjustable to fit a roof pitch range from 7.5°-45°
Incl. installation mat. (32 screws)
ABS-Lock® X Solutions for wooden surfaces Group A
Supporting tube for ABS-Lock® X and ABS-Lock® EG250Stainl. steel supp. tube for most ABS-Lock® X & EG250 models, incl. force
absorption. Must be used to supp. ends & corners in a lifeline system For roof,
wall, facade & overhead system
Supp. Ø 42mm, XXX = protrusion
LX-STÜTZR-XXX = for Lock X LG-STÜTZR-XXX = Lock EG250
XXX = various lengths avail. depending on the model/type
12 12 P R O D U C T L I S T 2 0 1 3
LG-1000
LG-1001
L-OT
PrODUCT DesCriPTiON OrDer NO.
IMPORTANT: Prior to using the components please read the Installation and User Manual!
ABS-Lock® EG250Stainl. steel weighted anchor fitted with a durable, environmentally resistant
mesh, tested acc. to EN 795, cl. E, also suit. for as an end or corner supp. in
a lifeline system when equipped with opt. supp. tube (LX-STÜTZR-XXX, p. 11).
Weighed down with substrate, concrete slabs, gravel etc.
Single anchorage point: 250 kg needed to weigh device down (360 kg when
used as an end/corner anchor) frame dimensions: 1.5x1.5m
Incl. protective mats to protect the roof membrane
ABS-Lock® EG260Mobile stainl. steel weighted anchor w. portable weights, tested acc. to EN 795,
cl. E, for 1 pers. Relocated in just 5-10 mins.
Incl. 10x portable weights, (each 25kg)
Frame dimensions: 1.4x1.3m
Incl. large, weather-proof protective fleece mat
Total weight: 260 kg
ABS-Lock OnTop®V2A cross-shaped anchor which is fused onto the upper roof membr. using
the same roof membr. mat. as that already installed. Tested for loads acc.
to EN 795 for 3 pers., also suit. as an interm. supp. in a lifeline system
For tear-resistant bitumen & PVC roof surfaces (reinforced fabric)
Max. force uptake: 12 kN
Strut length: 2m, stand. anchorage supp.: 300mm
Roof membr. mat. not supp./not incl. in the price!
Penetration-free roof anchorage points Group A
Group B
PENETRATION-FREE SOLUTIONS
mobile
13P R O D U C T L I S T 2 0 1 3
L-SD-300 L-SD-400
DH05
DH04-VA-FDH04-VA-F-RDH04-VA-F-ADH04-VA-F-X
DH04-VA-OGDH04-VA-OG-RDH04-VA-OG-ADH04-VA-OG-X
DH03-VA-F
PrODUCT DesCriPTiON OrDer NO.
Anchorage solutions for pitched roofs Group B
ABS-Lock® SDAnchorage construction for pitched roofs, attached to two rafters by screwing
device onto the crossbars. Tested acc. to EN 795 for 3 pers., also suit. as end
or corner supp. in a lifeline system.
Ø42mm, L = 300/400mm, stainl. steel, 1m crossbar - galvanized steel
Angle can be adjusted to fit
Can be aligned to match any tile shape
Min. rafter size: 6x12cm, max. dist. betw. the rafters 920mm
ABS-Lock® DH05Stainl. steel roof safety hook fitted with a cranked shaft and base plate, ser-
ves as an anchorage point for simult. usage by 3 pers. and as a ladder hook
acc. to EN 795 & EN 517 B.
Designed for rafter attachment (through the counter battens)
Can also be used with over-rafter insulation
Base plate allows flex. installation
Incl. installation mat.
ABS-Lock® DH04-F (flat design)Stainl. steel roof safety hook w. flat shaft, serves as an anchorage point for
simult. usage by 3 pers. & as a ladder hook acc. to EN 795 & EN 517 B.
Ideal for slate roofs w. paneling installed throughout
Designed for rafter attachment (through the paneling & counter battens)
Can also be used w. over-rafter insulation
Incl. installation mat.
R = red (RAL 3009) a = anthracite (RAL 7005) X = special color
ABS-Lock® DH04-OG (cranked design)Stainl. steel roof safety hook witwh a cranked shaft, serves as an ancho-
rage point for simult. usage by 3 pers. and as a ladder hook acc. to EN 795
& EN 517 B.
Ideal for bridging the roof battens on a tiled roof
attached to the rafters (through the counter battens)
Can also be used w. over-rafter insulation Incl. installation mat.
R = red (RAL 3009) a = anthracite (RAL 7005) X = special color
ABS-Lock® DH03-Falz Stainl. steel roof safety hook designed to be fitted to an ABS-Lock® Falz IV
anchorage point for penetration-free install. on a metal seam roof, ser-
ves as an anchorage point for 3 pers. simult. & as a ladder hook acc. to
EN 795 & EN 517 B.
Ideal for pitched roofs w. metal seam panels
Fitted to an ABS-Lock®Falz IV bracket (Prod. PF-4-XX-XXX, p. 14)
Only use with an ABS-Lock®Falz IV bracket
price r
eduction
14 P R O D U C T L I S T 2 0 1 3
PF-4-RB-450PF-4-RB-660
PF-4-465
PF-4-RB-ZW
PF-4-500
PF-4-ST-450PF-4-ST-660PF-4-CU-450PF-4-CU-660
PF-4-ST-ZWPF-4-CU-ZW
PrODUCT DesCriPTiON OrDer NO.
IMPORTANT: Prior to using the components please read the Installation and User Manual!
ABS-Lock® Falz IV Rundbördelfalz (rounded-edge seams)Stainl. steel anchorage point w. alum. clamps for rounded-edge profiles, tested
for 3 pers. acc. to EN 795, also suit. for use as a supp. in a lifeline system
For seam intervals of 300-450mm & 420-660mm
Ideal for BEMO, KalZip & similar alum. profile systems
ABS-Lock® Falz IV-465Stainl. steel anchorage point which is clamped onto special profiles (avail. upon
request), tested acc. to EN 795 for 3 pers., also suit. as a lifeline system supp.
Also suit. for Zambelli Ribroof 465 & Domico GBS systems
ABS-Lock® Falz IV Rundbördelfalz ZW (rounded-edge seams)Stainl. steel interm. bracket w. alum. clamps for rounded-edge profiles & ABS
lifeline systems. Not for usage as a single anchorage point.
Attached to just one seam using two clamps
Ideal for BEMO, KalZip & similar alum. profile systems
ABS-Lock® Falz IV-500Stainl. steel anchorage point for clamping onto special profiles (avail.
upon request), tested acc. to EN 795 for 3 pers., also suit. for usage as a
lifeline system supp.
Also suit. for Zambelli Ribroof 500 & Domico Domitec systems
ABS-Lock® Falz IV Stehfalz (standing seams)Stainl. steel anchorage point w. alum. clamps for standing seam profiles,
tested acc. to EN 795 for 3 pers., also suit. for use as a supp. in a lifeline system.
For seam intervals of 300-450mm & 420-660mm
Ideal for BEMO, Rheinzink & similar profile systems
ST = for alum., titanium zinc, steel cu = for copper standing seams
ABS-Lock® Falz IV Stehfalz ZW (standing seams)Stainl. steel interm. bracket w. alum. clamps for standing seams & ABS lifeline
systems. Not to be used as a single anchorage point.
Attached to just one seam using two clamps
Ideal for BEMO, Rheinzink & similar profile systems
ST = for alum., titanium zinc, steel cu = for copper standing seams
ABS-Lock® Falz IV Metal profile clamps Group B
Penetration-free seam profile solutions
ABS-Lock® FALZ products
15P R O D U C T L I S T 2 0 1 3
PF-1003A
PF-5-STPF-5-CU
PF-5-RB
PrODUCT DesCriPTiON OrDer NO.
ABS-Lock® Falz IIIAlum. anchorage point w. stainl. steel anchorage eyelet, for clamping onto
rounded-edge profiles, tested acc. to EN 795 for 1 pers.
Attached to the seam using a single clamp
Ideal for BEMO, KalZip & similar alum. profile systems
ABS-Lock® Falz V Stehfalz (standing seams)Stainl. steel anchorage point w. alum. clamps for standing seam profiles,
tested acc. to EN 795 for 3 pers., fits any seam interval
Attached to just one seam using two clamps
Ideal for BEMO, Rheinzink & similar profile systems
ST = for alum., titanium zinc, steel cu = for copper standing seams
ABS-Lock® Falz V Rundbördelfalz (rounded-edge seams)Stainl. steel anchorage point w. alum. clamps for rounded-edge profiles, tested
acc. to EN 795 for 3 pers., fits any seam interval.
Attached to just one seam using two clamps
Ideal for BEMO, KalZip & similar alum. profile systems
ABS-Lock® Falz III
ABS-Lock® Falz V
Metal profile clamps
Metal profile clamps
Group B
Group B
Rounded-edge seamsMounting options:
ABS-Lock® Falz IV-ZW / V
ABS-Lock® Falz III
ABS-Lock® Falz IV
Standing seamsMounting options:
ABS-Lock® Falz IV-ZW / Falz V
ABS-Lock® Falz IV
Special profilesMounting options:
ABS-Lock® Falz IV-465
ABS-Lock® Falz IV-500
1
1
4
4
6
6
2
2
5
5
7
7
3
3
16 P R O D U C T L I S T 2 0 1 3
SY-1000
SY-1007
SY-1051
SY-1008
PrODUCT DesCriPTiON OrDer NO.
IMPORTANT: Prior to using the components please read the Installation and User Manual!
Special ABS stainl. steel 8mm cableStainl. steel cable for ABS-Lock®SYS I & II & SafetyHike lifeline systems
Manuf. from V4A mat. (1.4401)
Weight: 250g/m
ABS 8000 8mm tensioning elementStainl. steel end bracket w. clevis & integr. tensioning device.
Basic comp. in all ABS-Lock SYS I & SYS II lifeline systems
Attached to the cable onsite
ABS 8620 8mm clevis (molded)Stainl. steel end bracket for ABS-Lock®SYS I & II lifeline systems.
Supplied pre-molded to one end of the cable
Manuf. completely from stainl. steel
ABS 8020 8mm clevis (not molded-on)Stainl. steel end bracket for ABS-Lock®SYS I & II lifeline systems.
Attached to the cable onsite
Manuf. completely from stainl. steel
Standard components Group A
Fall protection lifeline systems Ø8mmABS-Lock® SYS I
ABS-Lock® SYS II
Non-traversable supports
Traversable supports
The ABS-Lock® SYS agenda:
Vital component in all ABS-Lock® SYS lifeline systems:
End brackets
For cables < 80m:1 tensioning element with integrated clevis1 clevis (standard: molded)
For cables ≥ 80m:2 tensioning elements with integrated clevis
Cable and labeling:
1 specification plateRequired cable length
Traversable cabling system:
Traversable cornersTraversable intermediate brackets1 lifeline glider per person
17P R O D U C T L I S T 2 0 1 3
SY-1015B
SY-1016B
SY-1028B
SY-1016B-UEK-ASY-1016B-UEK-I
SY-1015
PrODUCT DesCriPTiON OrDer NO.
ABS intermediate cable bracket 8mmStainl. steel interm. cable bracket designed for the ABS-Lock®SYS II system
Fully traversable using ABS universal gliders (SY-1024A+B, p. 19)
Incl. installation mat.
ABS 90° curve element with carrier plateStainl. steel curve element w. carrier plate for 90° curves, installed on top of an
ABS supp. or facade corner plate. Fully traversable.
For concave & convex curves
ABS 135° curve elementStainl. steel curved element for semi-circ. curves (135°), designed for moun-
ting directly on top of an ABS supp. Fully traversable w. ABS universal gliders
(SY-1024A+B, p. 19) For concave & convex curves
ABS overhead curve element Ø8mm convex/concaveStainl. steel curve element w. carrier plate for 90° curves, installed on top of
an ABS support or facade corner plate. Incl. installation mat.
Sy-1016B-ueK-a = convex curve Sy-1016B-ueK-i = concave curve
Optional components for glide-over functionality Group B
Convex Concave
ABS SZH-SStainl. steel interm. cable bracket designed for overhead install. (ABS-Lock®SYS II)
Fully traversable overhead solution
Use with ABS GLEIT-RO (Sy-1037, p. 19)
18 P R O D U C T L I S T 2 0 1 3
SY-1000A
SY-1007A
SY-1051A
SY-1008A
SY-1015A
SY-1016A
SY-1028A
SY-1016A-UEK-ASY-1016A-UEK-I
PrODUCT DesCriPTiON OrDer NO.
IMPORTANT: Prior to using the components please read the Installation and User Manual!
Special ABS stainl. steel cable 6mmStainl. steel cable for ABS-Lock®SYS III & IV lifeline systems
Manuf. from V4A mat. (1.4401)
Weight: 152g/m
ABS 8000/6 6mm tensioning elementStainl. steel end bracket w. clevis & integr. tensioning device.
Basic comp. in all ABS-Lock SYS III & SYS IV lifeline systems
Attached to the cable onsite
ABS 8620/6 6mm clevis (molded)Stainl. steel end bracket for ABS-Lock®SYS III & IV lifeline systems.
Pre-molded to one end of the cable
Manuf. completely from stainl. steel
ABS 8020/6 6mm clevis (not molded-on)Stainl. steel end bracket for ABS-Lock®SYS III & IV lifeline systems.
Attached to the cable onsite
Manuf. completely from stainl. steel
Group A
Group B
Fall protection cabling systems Ø6mmABS-Lock® SYS III
ABS-Lock® SYS IV
Non-traversable supports
Traversable supports
ABS intermediate cable bracket Ø6mmStainl. steel interm. cable bracket designed for the ABS-Lock®SYS IV syst., Ø6mm
Fully traversable using ABS universal gliders (SY-1024A+B, p. 19)
Incl. installation mat.
ABS 90° curve element with carrier plateStainl. steel curve element w. carrier plate for 90° curves, installed on top of an
ABS support or facade corner plate. For Ø6mm cables.
For concave & convex curves
ABS 135° curve elementStainl. steel curved element for semi-circ. curves (135°), designed to be moun-
ted directly on top of an ABS supp. For Ø6mm cables.
For concave & convex curves
Standard components
Optional components for glide-over functionality
ABS overhead curve element Ø6mm convex/concaveStainl. steel curve element w. carrier plate for 90° curves, installed on top of an
ABS supp. or facade corner plate. Incl. installation mat.
Sy-1016a-ueK-a = convex curve Sy-1016a-ueK-i = concave curveConvex Concave
19P R O D U C T L I S T 2 0 1 3
SY-1009SY-1009-F
SY-1016-FA
SY-1031
SY-1024A+B
SY-1062-8SY-1062-4
SY-1037
PS-ROLL
SY-FORCE-8SY-FORCE-8-A
PrODUCT DesCriPTiON OrDer NO.
Standard components
Group A
ABS specification plateAlum. lifeline system specific. plate
SY-1009: [2] Angular shape fits system supports
SY-1009-F: [1] Flat shape - hooked onto a cable or wall mount.
Bracket for facade cornersBracket for 90° facade corners - attached laterally to the facade edge. An SY-1016A,
resp. B, is installed using the upper holes to lead the cable around the corner.
Incl. installation mat., for structures ≤ 200mm
ABS SPStainl. steel connector tab connects two lifeline systems to one support
or to create a T-junction in a lifeline system.
ABS universal gliderDetachable lifeline glider made of steel combined with a special bronze alloy,
incl. ABS carabiner hook for closing the system
For Ø6mm & Ø8mm stainl. steel lifeline systems (ABS-Lock®SYS II & IV)
ABS force limiter: 8 resp. 4 kNStainl. steel force limiter w. hard rubber casing limits the force from a fall
to max. 8 kN (SY-1062-8), resp. max 4 kN (SY-1062-4)
Casing indicates a fall (fall indicator)
ABS Gleit-ROStainl. steel lifeline glider w. rollers for overhead applications. Glides perf. along
the stainl. steel cable. Ideal for use w. a vert. lifeline.
For straight Ø8mm stainl. steel lifeline stretches (ABS-Lock®SYS I & II)
ABS traveling trolleyLifeline glider w. roller, glides smoothly along the cable.
For our fabric-covered Ø14mm ABS ASK 8 kernmantle cable (PS-1013-XX)
For Ø6 & Ø8mm ABS-Lock®SYS I, II, III & IV stainl. steel cables
Group B
lifeline system gliders
For one individual
4
8
1
2
NEW
Optional components
ABS force absorber SYS Force-85-in-1 end bracket w. clevis combines the following features:
[1.] Tensioning element, [2.] spring bias, [3.] cable clamp,
[4.] Force absorber max. 8 kN, [5.] Fall indicator
Sy-foRce-8-a = can also be connected to an alarm system
20 P R O D U C T L I S T 2 0 1 3
SH-END
SH-TOP-S
SH-TOP-L
SY-1000
SH-GLEIT
SY-1051
SH-ZW
PrODUCT DesCriPTiON OrDer NO.
IMPORTANT: Prior to using the components please read the Installation and User Manual!
ABS SafetyHike® end bracketLower ABS SafetyHike® section
Integr. tensioning device
Manuf. completely from stainl. steel (1.4301)
ABS SafetyHike® lifeline system
ABS SafetyHike® short top sectionUpper SafetyHike® section with a short ext.
Manuf. completely from stainl. steel (1.4301)
Ext.: Approx. 30cm above the top rung
ABS SafetyHike® long top sectionUpper SafetyHike® section w. a long ext.
Manuf. completely from stainl. steel (1.4301)
Ext.: Approx. 130cm above the top rung for a larger connect/disconnect area
ABS SafetyHike® special stainless steel cableStainl. steel cable for the ABS SafetyHike® lifeline system
Ø8mm stainl. steel cable
Weight: 250g/m
ABS SafetyHike® vertical lifeline gliderVertical lifeline glider for the ABS SafetyHike® system, w. integr. extra short fall-
absorbing lanyard & carabiner hook
Autom. locks in the case of a fall
Group B
ABS 8620 8mm clevis (molded)Stainl. steel end bracket for ABS-Lock® SYS I & II lifeline systems & our vert.
ABS SafetyHike® system
Pre-molded to one end of the cable
130cm
30cm
130cm
30cm
ABS SafetyHike® intermediate bracketInterm. cable bracket is attached to a ladder rung
Rubber guide facilitates hooking up/unhooking the stainl. steel cable
Recomm. intervals: Indoors: every 6-7m, outdoors: every 5-6m
Group A
Group C
Vertical lifeline systems
21P R O D U C T L I S T 2 0 1 3
RT-S-3000
RT-B-ZWRT-ST-ZWRT-ZW-100
RT-B-ZW-VRT-ST-ZW-VRT-ZW-V-100
RT-VB
RT-B-ENDRT-ST-ENDRT-END-100
RT-HK-90RT-HK-XX
RT-GLEIT
PrODUCT DesCriPTiON OrDer NO.
ABS RailTrax® rail system
Group B
ABS RailTrax® rail 3mStainl. steel rail (1.4301 material), length = 3000mm, bores on both sides to
add additional rail elements or complete the section. Tested acc. to EN 795 for
max. 4 pers. Spec. lengths avail. upon request!
ABS RailTrax® intermediate anchorAs above, but for situations where the rail joints do not correspond to the secu-
ring brackets, manuf. completely from 1.4301 mat.
Incl. installation mat. for: B = concrete dowels, ST = steel
RT-Zw-100 = 100mm tab for facades and installation on ABS supports
ABS RailTrax® interm. anchor connectorInterm. anchor for our ABS RailTrax® system, designed for rail joints, i.e. to
connect two rail sections, manuf. completely from 1.4301 mat.
Incl. installation mat. for: B = concrete dowels, ST = steel
RT-ZW-V-100 = 100mm tab for facades and installation on ABS supports.
ABS RailTrax® end stop End bracket for ABS RailTrax®, with securing pins for attaching and removing
rail gliders, manuf. completely from 1.4301 mat.
Incl. installation mat. for: B = concrete dowels, ST = steel
RT-end-100 = 100mm tab for facades and installation on ABS supports
ABS RailTrax® horizontal curveStainl. steel curve rail (1.4301 mat.) for overhead use & flat roof systems.
Important: Check the radius!
RT-hK-90 = fixed radius 220mm/90° RT-hK-XX = made-to-measure
ABS RailTrax® rail gliderRail glider for the ABS RailTrax® system
Manuf. completely from 1.4571 mat.
Max. environmental resistance for long-term usage
Rail systems
ABS RailTrax® 4-hole connectorRail connector - not attached to the subsurface, made of 1.4301 mat.
22 P R O D U C T L I S T 2 0 1 3
L2-VA-DECKEL
L1-1000
L2-ST-30
L2-B-100L2-B-150L2-B-200
L2-ST-100L2-ST-150L2-ST-200
PrODUCT DesCriPTiON OrDer NO.
IMPORTANT: Prior to using the components please read the Installation and User Manual!
Stainl. steel protective capStainl. steel protective cap (1.4301) for ABS-Lock®II
Ø: 40mm
Self-locking
ABS-Lock® IABS-Lock® I socket pin. Tested acc. to EN 795, cl. A+B, for simult. usage by 2
pers. Use w. ABS-Lock® II sleeve. Important: Our ABS-Lock® I can be detached
& moved from sleeve to sleeve. Quantity: As req.
Manuf. completely from stainl. steel (1.4301)
Crossbar prevents device being accidently unlocked
ABS-Lock® II for steel (extra short)ABS-Lock® II sleeve. Tested acc. to EN 795, cl. A+B, for simult. usage by 2 pers.
Use w. ABS-Lock® I socket pin. Short model for steel structures.
Incl. white PVC cap & protective stopper for installation phase
30mm long, upper hexagonal ring for countering
Incl. installation mat.
ABS-Lock® II for concreteABS-Lock®II sleeve. Tested acc. to EN 795, cl. A+B, for simult. usage by 2 pers.
Use w. ABS-Lock®I socket pin. For concrete C20/25 (B25) and above - also
cracked.
Incl. white PVC cap & protective stopper for installation phase
Avail. lengths: 100, 150 & 200mm. Other lengths avail. upon request!
Please note: Installation in masonry only after consulting ABS.
ABS-Lock® II for steelABS-Lock® II sleeve. Tested acc. to EN 795, cl. A+B, for simult. usage by 2 pers.
Use w. ABS-Lock® I socket pin. For steel structures.
Incl. white PVC cap and protective stopper for installation phase
Incl. installation mat.
Avail. lengths: 100, 150 & 200mm. Other lengths avail. upon request!
ABS-Lock® I+II Anchorage points for securing windows Group A
ABS-Lock® I + II
Detachable anchorage points Lock i Lock ii
The following components are supplied with all our Lock II models:
1 protective cap (white) & 1 protective stopper
23P R O D U C T L I S T 2 0 1 3
L1-TELE-1L1-TELE-3L1-TELE-4
L2-UK-100L2-UK-300
L2-UK-500
L4-B-100L4-ST-100
L6-1000
L5-BL5-ST
LT
L2-ZUB-EB
L2-Winkel
PrODUCT DesCriPTiON OrDer NO.
ABS-Lock® I+II
ABS-Lock® IV
ABS-Lock® V
ABS-Lock® VI
ABS-Lock® T
Group A
Group A
Group A
Group A
Group B
ABS-Lock® I telescopic rodTelescopic device designed to hook up or unhook a Lock I socket pin from a
Lock II sleeve installed in the ceiling when standing.
TeLe-1 = 58-98cm TeLe-3 = 160-290cm TeLe-4 = 210-390cm
Substructure for suspended ceilingsTo bridge a suspended ceiling cavity
Incl. tab & installation mat. (cement not incl.)
X = L2-UK-100 ≤ 100mm, L2UK-300 ≤ max. 300mm
Mounting rod for suspended ceilingsTo bridge suspended ceilings, L = 50mm + ceiling cavity
Incl. tab, supporting tube and installation mat. (cement not incl.)
y = ≤ max. 900mm
ABS-Lock® IVStainl. steel anchorage point for concrete and steel, for 1 pers. acc. to EN 795
For concrete C20/25 (B25), adhesive must be purchased separately!
For steel structures, Ø12mm thread, incl. countering device
ABS-Lock® VIStainl. steel anchorage point for sheet metal roofs, tested acc. to EN 795 for 1 pers.
Particularly small & inconspicuous (M8) Also for safety nets
Sheet thickness ≥ 0.88mm (anchorage points), resp. 0.75 (safety nets)
ABS-Lock® VStainl. steel anchorage point for concrete and steel, for 1 pers. acc. to EN 795
Small and inconspicuous Incl. installation mat.
For concrete C20/25 (B25) & steel structures, Ø10mm thread
ABS-Lock® TAnchorage point fitted permanently to the girder, tested acc. to EN 795 for 3
pers., also suit. as a supp. in a lifeline system Stainl. steel angular plate, rod &
eyelet (1.4301), girder clamps made of hot galvanized steel.
For flange widths of 8-16mm,
For girder widths up to 320mm
Cementing accessory kitKit contains addit. mat. for fixing paneling & a stainl. steel anchor nut (1.4301)
for concrete, incl. 2x anchor screws.
Angular bracket for lateral installationAngular bracket for ABS-Lock®II - lateral installation
Incl. installation mat. (cement not incl.)
Stainl. steel (1.4301)
Accessories
Anchorage point for concrete and steel
Anchorage point for concrete and steel
Anchorage point for sheet metal roofs
Anchorage point for clamping onto a steel girder
Group C
24 P R O D U C T L I S T 2 0 1 3
SG-STABILIK
SG-ECKE-FIX
SG-ENDBÜGEL
SG-WAND
SG-ECKE-VAR
IMPORTANT: Prior to using the components please read the Installation and User Manual!
PrODUCT DesCriPTiON OrDer NO.
ABS StabilikSelf-supporting horizontal alum. guard rail
Incl. chest & knee rails, weights, upper clamp stoppers
no roof penetration, own weight holds it in place
chest rail height approx. 1.10m
Price per running meter, excl. installation
our aBS Stabilik is avail. w. straight or curved supports. Both models cost
the same! when ordering, pls. state the preferred system.
ABS St-W9090° corner set, alum.
Consisting of an upper & lower shaft
Incl. installation mat.
Horizontal safety rail
Additional charges for corners, end brackets etc.
Group B
ABS STABILIK - own weight holds it in place!
ABS end barSystem termination bar, alum.
Links up chest & knee rails
ABS Stabilik
ABS St-Wand (wall)End bracket for attachm. to walls or masonry, alum.
End brackets for chest & knee rails
Dowels to fit wall type not supplied!
ABS St-VarAdjustable corner set, alum.
Consisting of an upper & lower hinge
Incl. installation mat.
Straight Curved
25P R O D U C T L I S T 2 0 1 3
RW-RRW-R-4
BM-PFOST-T
BM-PFOST
BM-Schild
BM-8-G
SG-1016-1,5SG-1016-2SG-1016-2,5SG-1016-3
SG-1016-1,5-TSG-1016-2-TSG-1016-2,5-TSG-1016-3-T
PrODUCT DesCriPTiON OrDer NO.
ABS RoofWayAnti-slip walkway tiles for securing, marking & using walkways & roof surfaces.
Fleece backing mat.
For PVC & bitumen roofs Dimensions: 50x50x3cm
Installed using plug-in connectors:
Rw-R = plug-in connectors along the front & rear edges
Rw-R-4 = plug-in connectors on all 4 sides for more stability in a dual-
track system/at a fork!
ABS SkyDome
ABS BorderMark
ABS RoofWay
Group B
Group C
Group C
ABS BorderMark gate postStainl. steel post to which chain can be hooked up/unhooked, complete w.
pedestal post & protective mat to protect the roof membr., UV-resistant synth.
weight and synth. carabiner for hooking up/unhooking the chain.
ABS BorderMark postStainl. steel post (1.4301) complete w. pedestal weight & protective mat to
protect the roof membr., UV-resistant synth. weight
Height = 900mm Post Ø: 42mm
ABS BorderMark warning plateStainl. steel plate, w. warning mess. & symbols, incl. installation mat., 125 x 220mm
„Stop! Authorized personnel only“ „Access to fall danger zone“
„Mandatory use of PPE equipment from this point onwards!“
ABS BorderMark chain Ø 8mmWeather-proof synth. chain
Alternating yellow/black
Chain Ø8mm
ABS SkyDomeFour-sided, self-supp. guard rail system to seal off a domed rooflight
Consists of 4 side units, connectors & weights.
Handrail height = 1100mm 4 concrete weights
Manuf. completely from galvanized steel Incl. hand & knee rails
SG-1016-XX = Last 2 digits stand for the length of the side units in m.
The sides of the domed rooflight must be 0.5m shorter.
SG-1016-XX-T = fitted w. a gate on one side
Horizontal rail guard for domed rooflights
Barrier chain (cordoning off/marking)
Roof walkway marker tiles
26 P R O D U C T L I S T 2 0 1 3
FS-FSG01FS-FSG02FS-FSG03FS-FSG04FS-FSG05
FS-FAS01FS-FAS02FS-FAS03
FS-FH-S-WFS-FH-S-R
FS-FH-B-WFS-FH-B-R
Coming soon!
Coming soon!
IMPORTANT: Prior to using the components please read the Installation and User Manual!
PrODUCT DesCriPTiON OrDer NO.
ABS FSG window guardsTransportable window guard system which can be moved from window to win-
dow. Consists of two crossbars.
adjustm. range / weight:
FSG01 = 400-910mm / 6,9 kg FSG04 = 700-1160mm / 3,9 kg
FSG02 = 770-1720mm / 5,2 kg FSG05 = 1110-1570 / 4,9 kg
FSG03 = 490-730mm / 2,9 kg
ABS FAS window guardsTransportable window guard system which is installed in the window frame
using pre-installed guide sleeves. Price per bar.
adjustm. range / weight:
FAS01 = 190-620mm / 1,2 kg FAS03 = 1550-2400mm / 2,5 kg
FAS02 = 615-1610mm / 1,8 kg
Window guide sleeve SStandard guide sleeve for FAS system, w = white, R = red
Window guide sleeve BGuide sleeve for extruded profiles, w = white, R = red
ABS LaddFixLadder fixing device provides addit. protection from tipping. For perm. implem.,
outdoor usage poss., manuf. compl. from stainl. steel.
Supp. w. dowels for attachm. to walls/masonry
Can be clamped to gutters
Can be attached to parapet - pls. consult ABS first.
For indoor & outdoor usage
ABS LaddQuickTemporary ladder fixing device provides addit. protection from tipping. Spring
mech. allows device to be easily clamped betw. two rungs and then hooked
onto the gutter.
Rubberized hooks protect the gutter from scratches
Temporary: Connect up & remove as needed
ABS FSG
ABS FAS
ABS LaddFix
ABS LaddQuick
Transportable window guard
Window guard with guide sleeves
Permanently installed ladder fixing device
Temporary ladder fixing device
Group C
Group C
ABS LaddFix and LaddQuick – for all ladders!
27P R O D U C T L I S T 2 0 1 3
PS-FBA-140PS-FBA-160PS-FBA-180PS-FBA-200PS-FBA-220PS-FBA-240PS-FBA-260
RB-140/180RB-160/200
PS-1069
LT-Q
PrODUCT DesCriPTiON OrDer NO.
Group B
Group B
ABS CradleGuard®Mobile anchorage point, tested acc. to EN 795 for 1 pers. - glides smoothly
along a horizontal track (e.g. facade access system)
Can be attached to/removed from the track at any desired point.
8 rollers ensure optimum gliding props.
Easy-to-use double securing mech.
For girder widths: 140, 160, 180, 200, 220, 240, 260mm
Other widths avail. upon request!
ABS RunBeamRoller-mounted stainl. steel girder glider, tested acc. to EN 795 for 1 pers.,
Manuf. completely from stainl. steel. Glides smoothly along an overhead girder.
For perm. installation and usage - incl. outdoors
For 4 girder widths (adjustable):
RB-140/180 = 140mm and 180mm
RB-160/200 = 160mm and 200mm
ABS door traverseMobile „door traverse“ anchorage point for door openings. Tested acc. to EN
795. The door traverse is easily installed - no tools required.
For all frames w. a max. opening of 1100mm (1 pers.)
When used by 2 pers. simult. max. door opening: 900mm.
Contact surfaces covered in synth. mat. to protect the structure
Weight: 10 kg
ABS-Lock® T-QuickMobile anchorage point for steel girders, tested acc. to EN 795 for 1 pers.,
manuf. completely from alum. Easy to use, can be installed or removed in a
matter of seconds.
Adjustable to fit steel girders w. flange widths of 95-400mm.
Ultralight design, weighs only 1.5 kg
Mobile Anschlagpunkte
Mobile anchorage points
Girder gliders for facade access systems
ABS CradleGuard®
Price r
eduction!
More sizes avail. upon request
28 P R O D U C T L I S T 2 0 1 3
PS-1013-15PS-1013-23PS-1013-30
PS-VB-1.0PS-VB-1.5PS-VB-2.0
PS-1083
PS-VB-SK-5PS-VB-SK-10PS-VB-SK-15PS-VB-SK-20
PS-1083-WEST-S/MPS-1083-WEST-L/XLPS-1083-WEST-XXL
IMPORTANT: Prior to using the components please read the Installation and User Manual!
PrODUCT DesCriPTiON OrDer NO.
Personal protective equipment
Connectors
Safety harnesses
Group C
Group C
Group C
ABS ASK 8 - temporary safety cable
ABS ASK 8Temp. lifeline system, tested acc. to EN 795 for simult. usage by 4 pers. Ideal
for use on flat & pitched roofs.
High-quality kernmantle cable, Ø 14mm
Incl. cable tensioner & 1 (2/3) freely-moving, spliced carabiner hooks
Use w. ABS traveling trolley (PS-ROLL, p. 19), also ideal for usage w. a vert.
lifeline!
PS-1013-15 = 15m, PS-1013-23 = 23m, PS-1013-30 = 30m
ABS VB BFDConnector made of Ø12mm kernmantle cable, incl. integr. energy absorber,
carabiner at each end.
Sharp edge-tested
Lic. acc. to EN 354 & EN 355
Avail. lengths: 1m, 1.5m, 2m
ABS safety harnessUniversal harness w. hook-up points at the front & back. Easy to clean, for all
types of roof work & vert. lifelines.
W. handy „click“ fasteners
Adjustable straps (shoulders & legs)
Tested acc. to EN 361
ABS VB BFD SKConnector made of Ø12mm kernmantle cable, incl. integr. rope shortener &
energy absorber. Can be adjusted to fit the distance to the edge.
Sharp edge-tested
Lic. acc. to EN 353-2 & EN 355
Avail. lengths: 5m, 10m, 15m, 20m
ABS Safety JacketHarness sewed into a safety jacket, breast & dorsal anchor eyelets. Signal color
is ideal for poor visibility/nearby traffic (abseiling into manholes etc.)
Leg straps fitted w. „click“ fasteners, large pocket on the back
Neon yellow, reflector strips, integr. D-ring extender
Tested acc. to EN 361 & EN 471
29P R O D U C T L I S T 2 0 1 3
PS-GB-Set-x
PS-FP-Set-x
PS-HWB-x
PS-HWS-x
PS-HWPB-x
PS-HWPS-x
PS-1015
PS-1015K
PS-DD-Set-5-xPS-DD-Set-10-xPS-DD-Set-15-xPS-DD-Set-20-x
x = Bx = Tx = K
PrODUCT DesCriPTiON OrDer NO.
Group C
Group C
Group C
ABS scaffolder‘s setIncl. safety harness w. dorsal eyelet & elast. lanyard
1.5m-2m (fully stretched) & energy absorber, incl. sewn-in 0.5m extension and
Velcro strips. Max. lanyard length can be extended up to 2.5m! Incl. storage
(see below)
ideal for implem. on scaffolding. also en 363-certified!
ABS window cleaner‘s setIncl. safety harness w. dorsal eyelet & 2 m lanyard, integr. energy absorber.
Incl. storage (see below)
ideal for window-cleaning work.
ABS HWBWith alum. casing & strap, lic. for horiz. usage
Avail. lengths x = 2m, 3.5m
ABS HWSWith alum. casing & steel cable, lic. for horiz. usage
Avail. lengths x = 4,5m, 6m, 9m, 12m, 18m, 24m
ABS HWPBWith synth. casing & strap, lic. for horiz. usage
Avail. lengths x = 3,5m, 5,5m, 7m, 9m, 12m, 15m
ABS HWPSWith synth. casing & steel cable, lic. for horiz. usage
Avail. lengths x = 3m, 4,5m, 6m, 9m, 12m, 18m, 24m
ABS Care+ largeMetal PPE storage locker, painted red with PPE label
Dimensions: 650x400x350mm, can store 1 set + access. (ASK 8, helmet etc.)
Lockable, incl. 2 keys Drying rod inside
ABS Care+ smallMetal PPE storage locker, painted red with PPE label
Dimensions: 500x350x220mm, plenty of space for one PPE set
Lockable, incl. 2 keys Drying rods inside
ABS roofer‘s setIncl. safety harness w. dorsal eyelet & lanyard w. rope shortener, max. lengths:
5, 10, 15 & 20m, tape sling & storage (see below). Rope shortener allows rope
to be adjusted as req.
ideal for implem. on all roof types.
all sets include a storage solution:
Large sack [1]
Large shoulder bag [2]
Steel plate carrying case [3]
PPE sets according to EN 354, 355 and 361
Vertical lifelines
Storage lockers
1 2 3
30 P R O D U C T L I S T 2 0 1 3
ZU-1009ZU-1009-FZU-1009A-F
ZU-SIGNAL-80
ZU-1006
ZU-V-16-300ZU-V-16-600ZU-V-16-1200
ZU-BITU-16ZU-BITU-42
ZU-V-42-300ZU-V-42-600ZU-V-42-1200
ZU-PVC-16ZU-PVC-42
ZU-PP-16ZU-PP-42
ZU-PE-16ZU-PE-42
IMPORTANT: Prior to using the components please read the Installation and User Manual!
PrODUCT DesCriPTiON OrDer NO.
ABS THERMThermal protective cap, 320mm, made of UV-resistant & weather-proof synth.
mat. Covers anchor section protruding above the roof membr. Is not sealed in!
Can be cut to size onsite.
Zu-1009 = [1] For ABS-Lock® III und X
Zu-1009-f = [2] For ABS-Lock®III & X & lifeline systems
Zu-1009a-f = [3] For ABS-Lock®X-SR & lifeline systems
Additional charge for ABS SIGNAL[4] Signaling rod to mark an ABS-Lock® anchorage point.
Attached to an ABS-THERM cap using 2 plastic ties
Ideal in winter: The anchorage points are visible even when you‘re snowed in!
80cm long, Ø6mm, mat.: Fiber glass composite, signal color
Thermal protective caps
Sealant collars
Collar extensions
Group B
Group B
Group B
ABS EPDMEPDM sealant collar for cold bonding
For bitumen roof membranes
For Ø16mm & Ø42mm supports, incl. tube clamp
ABS collar extension (for Ø16 supports)Sealant shrink tubing for ABS collars, extends the seal above the aquifer layer,
e.g. inverted roofs
Standard lengths: 300, 600 & 1200mm, simply shorten it onsite
ABS BITUBitumen sealant collar (sanded) for bitumen roofs.
For bitumen roof membranes
For Ø16mm & Ø42mm supports, incl. 100mm shrink tubing
ABS collar extension (for Ø42 supports)Sealant shrink tubing for ABS collars, extends the seal above the aquifer layer,
e.g. inverted roofs
Standard lengths: 300, 600 & 1200mm, simply shorten it onsite
ABS PVCSealant collar for PVC roofs
e.g. for Sikaplan, Bauder, FDT, Wolfin, Alwitra, Flag, Alkorplan systems
For Ø16mm & Ø42mm supports, incl. 100mm shrink tubing
ABS PPSealant collar for PP roofs
e.g. for Bauder, FDT, Vedag, Wolfin, Flag, Sucoflex systems
For Ø16mm & Ø42mm supports, incl. 100mm shrink tubing
ABS PESealant collar for PE roofs
e.g. for Polyfin, Nebiprofa, Schedetal systems
For Ø16mm & Ø42mm supports, incl. 100mm shrink tubing
Accessories
Accessories
Accessories
1 2
43
31P R O D U C T L I S T 2 0 1 3
ZU-1000ZU-1017
ZU-1001ZU-1001A
ZU-1025ZU-1025A
ZU-1003
ZU-1002
PS-1025-1PS-1025-3PS-1025-4
PS-TELE-4PS-TELE-6PS-TELE-XXX
PrODUCT DesCriPTiON OrDer NO.
Accessories
Accessories
Group B
Group C
ABS specially designed adhesive2-comp. adhesive for installing ABS-Lock® II & III in concrete or masonry & for
anchor rods. Incl. 2 mixing nozzles
Zu-1000 (300ml) = e.g. for ABS cartr. applic. gun ZU-1003
Zu-1017 (145ml) = for all commercially avail. guns
Bore hole cleaning brushCleaning brush w. wire bristles for cleaning out bore holes.
ZU-1001 = For bore holes ≤ Ø20mm (e.g . ABS-Lock®III)
ZU-1001A = For bore holes ≤ Ø25mm (e.g . ABS-Lock®II)
ABS perforated sleeveMetal perforated sleeve for installation using spec. adhesive, avail. in 2 sizes.
For hollow-core slab floors/masonry with air pockets.
ZU-1025 = For M16 thread ZU-1025A = For M22 thread
Cartridge applicator gun for ABS special adhesiveRobust, durable cartr. applic. gun for 300ml ZU-1000 cartr. Simple cartr.
installation, easy to use.
Bore hole air pumpManually operated air pump for cleaning out bore holes, w. hose nozzle. High
capacity, air chamber length 42cm
ABS UP-SystemTelescopic rod system w. spec. carabiner, for hooking up protective equipment
from a standing pos./secured area, incl. spec. designed carab.
1025-1 = 58-98cm 1025-3 = 160-290cm 1025-4 = 210-390cm
ABS telescopic rodExtra-long telescopic rod w. hook, ideal for pulling out vert. lifelines installed in
the ceiling when standing.
Standard lengths: 4m, 6m. Other lengths avail. upon request.
Installation accessories
Telescopic rods
Left: ABS Up system with specially-designed carabiner - hooking up/unhooking is done from a standing position!Right: With our ABS telescopic rods you can even reach systems installed very high up in the ceiling!
Prod
uced
by
| ABS
Saf
ety
GmbH
| Da
te 0
4-06
-201
3
abssafetygmbh
ABS Safety
ABS Safety GmbHGewerbering 347623 KevelaerGermany
Tel: +49 (0)2832 97281-0Fax: +49 (0)2832 97281-280
[email protected] www.absturzsicherung.de
www.fall-arrest.eu [email protected]
www.fall-protection-usa.com [email protected]