ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | [email protected]AVT 1394 accessories 1394a adapter PCI bus 1394 4601-21 Your dual 1394a adapter for the PCI bus. IOI’s dual 1394a adapter offers users the ability to directly connect up to two cameras of the AVT’s long range of 1394a cameras such as Marlin, Dolphin, Guppy and Oscar to their PC in a very simple way. PCI 32 Bit theoretical bandwidth 1 of up to 132 MByte/s ensures low latency transmission of up to 2x 32 = 64 MByte/s of video data at full speed from even multiple cameras. One 1394a connector per bus allows the direct connection of locking cable. This makes this universal interface adapter ideal for industrial high speed multi camera applications with today’s PC’s. 1 Practical bandwidth is lower and dependent on individual systems/software conditions Highlights z Fully compliant with PCI 2.x at 3.3 V and 5 V signalling environment z Supports 33 MHz 32 bit specification z Up to 132 MByte/s PCI transfer bandwidth z Up to 64 MByte/s total 1394a bus bandwidth z Two separate 1394a buses on one adapter z One port per bus, allowing locking connectors z Up to eight cameras (DMA’s) parallel acquisition (bandwidth sharing) z Compliant with IEEE 1394a (2000) z 1394a data transfer rate up to 400 Mbit/s z Easy plug & play z Supports Windows and Linux z Compatible with all AVT 1394a cameras z Upwards compatible with AVT PIKE camera (@ 400 Mbit/s) z Compatible with - AVT FirePackage - AVT Fire4Linux (on request) - AVT Direct FirePackage z Additional power in connector to supply extra power for multi camera applications
IOI’s dual 1394a adapter offers users the ability to directly connect up to two cameras of the AVT’s long range of 1394a cameras such as Marlin, Dolphin, Guppy and Oscar to their PC in a very simple way. PCI 32 Bit theoretical bandwidth1 of up to 132 MByte/s ensures low latency transmission of up to 2x 32 = 64 MByte/s of video data at full speed from even multiple cameras. One 1394a connector per bus allows the direct connection of locking cable. This makes this universal interface adapter ideal for industrial high speed multi camera applications with today’s PC’s.
1 Practical bandwidth is lower and dependent on individual systems/software conditions
Highlights
Fully compliant with PCI 2.x at 3.3 V and 5 V signalling environment
Supports 33 MHz 32 bit specification Up to 132 MByte/s PCI transfer bandwidth Up to 64 MByte/s total 1394a bus bandwidth Two separate 1394a buses on one adapter One port per bus, allowing locking connectors Up to eight cameras (DMA’s) parallel acquisition
(bandwidth sharing) Compliant with IEEE 1394a (2000) 1394a data transfer rate up to 400 Mbit/s Easy plug & play Supports Windows and Linux Compatible with all AVT 1394a cameras Upwards compatible with AVT PIKE camera
(@ 400 Mbit/s) Compatible with
- AVT FirePackage - AVT Fire4Linux (on request) - AVT Direct FirePackage
Additional power in connector to supply extra power for multi camera applications
AVT 1394 accessories 1394a adapter PCI bus
Technical Specifications
Feature Description Adapter type Dual 1394a PCI 1394 chipset 2x Ti TSB43AB21 (Integrated link/phy) Interface PCI 2.x # buses 2x 1394a bus Ports 2x 1394a, supplying bus power (max. 1350 mA), but not more than 1500 mA
in total Speed 100, 200, 400 Mbit/s transfer rate Bandwidth 50/40/32 MByte/s at 400 Mbit/s (gross/net/video) per bus # cameras (DMA’s) up to 8 (External repeater for more than 2 cameras required) OS Support Windows NT4.0, 2000, XP, 2003, Linux 2.4.x/2.6.x Compliance FCC, CE Power 12 V – 36 V DC, supplying bus power up to 1500 mA max. Dimensions 120 mm x 120 mm Mass 80 g External power in 13 V – 36 V DC (cable adapter included) Operating temp. +5°C … +50°C Compatibility AVT FirePackage, AVT Direct FirePackage, AVT Fire4Linux (on request) Options: cables various lengths, with or without locking on either side, sold separately
Ordering information: Dual OHCI Dual Adapter IOI-4601-21 PCI, 2 OHCI IEEE1394-buses, 2 connectors K0000206 Cable options: Cable -2x Interlock IEEE1394a; (2x Interlock) 4.5 m, for Marlin / Oscar / Guppy K1200064 Cable -2x Interlock IEEE1394a; (2x Interlock) 10 m, for Marlin / Oscar / Guppy K1200163 Cable -2x Interlock IEEE1394a; (2x Interlock) 12.5 m, for Marlin / Oscar / Guppy K1200165 Cable -2x Interlock IEEE1394a; (2x Interlock) 17.5 m, for Marlin / Oscar / Guppy K1200162 Notes: Molex clamp locking (aka Interlock) is suitable for AVT Marlin, Guppy, Oscar. Please consult AVT or your local dealer if you require locking connector for Dolphin or third party cameras.
AVT 1394 accessories 1394b dual bus PCI Express adapter
FWB-PCIE1xE220
1394b DUAL BUS PCI Express adapter with FOUR ports.
IOI’s dual 1394b bus PCI Express adapter with four 1394b connectors offers users the ability to directly connect up to 16 cameras to their PC in a very simple way.
This PCI Express card is ideal for fast and reliable data transfers into the host system particularly in applications with multiple cameras or high data rates.
Highlights
Dual 1394b buses (OHCI 1.2 draft compliant) 4 bilingual 1394b ports with locking screw holes Eight isochronous transmit/receive contexts per bus Supports 100, 200, 400 and 800MB/s transfer rates 2.5 Gb/s burst rate of 1-lane PCI Express bus in both
directions Backward compatible with 1394a (2000) Complies with PCIe base specification 1.1 Compatible with all AVT Software Packages1 Easy plug & play, no driver required Internal IDE 4-pin DC power connector RoHS, CE and FCC compliant
1 For details refer to the corresponding releases
AVT 1394 accessories 1394b dual bus PCI Express adapter
Technical Specifications
Feature Description Adapter type Four port dual 1394b bus card with PCI Express interface PCI Express chipset IDT: 89HPES3T3 1394b chipset 2x LSI Logic FW643 PCI Express 1394b link/PHY chip Interface PCI Express, 1 lane Ports 4x 1394b Speed 100, 200, 400, 800 Mb/s transfer rate DMA 8x isochronous transmit/receive contexts per bus Compliance RoHS Directive (2002/95/EC), CE, FCC Operating temp. +5°C… 50°C Dimensions 100 mm x 110 mm Mass 68 g External power in IDE big 4-pin cable adapter +12V included
Ordering information: FWB-PCIE1xE220 Dual OHCI FireWire (4x IEEE 1394b) to PCI Express Host Adapter K0000385 Cable options: Cable 1394b screw lock IEEE1394b; (2x screw lock), with ferrites, 7.5m K1200134 Cable 1394b angled left IEEE1394b; angled left camera side , (2x screw lock), 7.5m, K1200295 Cable 1394b angled right IEEE1394b; angled right camera side, (2x screw lock), 7.5m, K1200300 Notes: Please contact your local dealer for further cable lengths and variants!
AVT 1394 accessories 1394b adapter with PCI Express
1394 FWB-PCIE1x11B
Your industrial 1394b card with PCI Express.
IOI’s PCI Express adapter with three 1394 bilingual connectors with screw locking offers users the ability to connect AVT’s high end cameras, espe-cially of the Stingray and Pike families, to their PC in a very simple way. PCI Express bandwidth of up to 250 MByte/s1 ensures low latency trans-mission of the up to 64 MByte/s of video data at full speed from AVT’s 1394b cameras. Marlin, Dolphin, Guppy
1 Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
and Oscar cameras can also be connected by the use of legacy cables.
Highlights
• Up to 64 MByte/s bus video bandwith • Compliant with IEEE 1394b (2002) • Backward compatible with IEEE 1394a
(2000) • Easy plug & play, no driver required • Compatible with all AVT 1394b cameras • Compatible with all AVT 1394a cameras by
the use of legacy cables • Compatible with all AVT Software Packages2 • Power in connector to supply power • Screw locking for 1394b ports
2 For details refer to the corresponding releases
AVT 1394 accessories 1394b adapter with PCI Express
Adapter Type PCI Express Card with three 1394b cable ports Host Controller Texas Instruments XIO2213A Interface PCI Express, 1-lane Ports 3 x 1394b, screw locking3, supplying bus power (max. 1500 mA) per
port Speed 100, 200, 400, 800 Mbps transfer rate Bandwidth 100/80/64 MByte/s at 800 Mbps (gross/net/video) # cameras (DMA’s) up to 4 (External repeater for more than 3 required) Compliance FCC, CE, RoHS Directive (2002/95/EC) Dimensions 85 mm x 120 mm Weight 52 g External power in 12 V – 32 V DC (big IDE 4-pin cable adapter included4) Options: Cables copper cables various lengths, with or without screw locking at both
sides, sold separately
Ordering information: FWB-PCIE1x11B 3x 1394b to PCI-Express Host Adapter, industrial K0000384 Cable options: Cable IEEE 1394b 9P –9P; 4.5 m Non-locking K1200122 Cable IEEE 1394b 9P –6P; 4.5 m Legacy, non-locking K1200124 Cable 5.0m 9-Pin-9-Pin, industrial IEEE 1394b; 2 x screw lock, 5.0m, black, 2 x ferrite K1200133 Cable 7.5m 9-Pin-9-Pin, industrial IEEE 1394b; 2 x screw lock, 7.5m, black, 2 x ferrite K1200134 Notes: Different locking cables available upon request.
3 Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 4 External power is required, when connecting more than one 1394b per card.
AVT 1394 accessories 1394b adapter with PCI Express
1394b FWB-PCIE1x20
Your industrial 1394b card with PCI Express.
This PCI Express adapter with two external 1394b bilingual connectors with screw locking offers users the ability to connect AVT’s high-end cameras, especially of the Stingray and Pike families, to their PC in a very simple way. PCI Express bandwidth of up to 250 MByte/s1 ensures low latency transmission of the up to 64 MByte/s of video data at full speed from AVT’s 1394b cameras. Marlin, Dolphin, Guppy and Oscar cameras can also be connected by the use of legacy cables.
1 Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1,000,000
Highlights
• Up to 64 MByte/s bus video bandwidth • Compliant with IEEE 1394b (2002) • Backward compatible with IEEE 1394a
(2000) • Easy plug & play, no driver required • Compatible with all AVT 1394b cameras • Compatible with all AVT 1394a cameras by
the use of legacy cables • Compatible with all AVT Software Packages2 • Power-in connector to supply bus power • Screw locking for 1394b ports • Bracket for low-profile PCI enclosed
2 For details refer to the corresponding releases
AVT 1394 accessories 1394b adapter with PCI Express
Adapter Type Two ext. port 1394b PCI Express Card Chipset LSI643 PCI Express 1394 host controller Interface PCI Express rev. 1.1, x1 lane Ports 2 x 1394 bilingual3, screw locking4, supplying bus power (max. 1500
mA) per port Speed 100, 200, 400, 800 Mbps transfer rate Bandwidth 100/80/64 MByte/s at 800 Mbps (gross/net/video) # cameras (DMAs) up to 8 OS Support Windows 2000/XP/Vista/20035, Linux 2.4.x/2.6.x Compliance FCC, CE, VCCI, RoHS Directive (2002/95/EC), WEEE Directive
(2002/96/EC)
Power 12 V – 32 V DC, supplying bus power, max. 1500 mA Operating temp. +5 °… 50 ° Celsius Dimensions 135 mm x 120 mm Weight 50 g External power in 13 V – 32 V DC (big IDE 4-pin cable adapter included6) Options: Cables copper cables various lengths, with or without screw locking at both
sides, sold separately
Ordering information: FWB-PCIE1x20 2x 1394b to PCI-Express Host Adapter, industrial K0000368 Cable options: Cable IEEE 1394b; 9 pin to 6 pin, 4.5 m IEEE 1394Legacy; 9-pin screw lock, 6-pin K1200288 Cable IEEE 1394b; 9 pin to 9 pin, 5.0 m IEEE 1394b; 2 x screw lock, 5.0m, black, 2 x ferrite K1200133 Cable IEEE 1394b; 9 pin to 9 pin, 7.5 m IEEE 1394b; 2 x screw lock, 7.5m, black, 2 x ferrite K1200134 Notes: Different locking cables available upon request.
3 Bilingual ports can either operate in 1394b or 1394a, depending on the device (cable) attached. 4 Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 5 DFP may require exchange of MS-driver, depends on service pack 6 External power is required, when connecting more than one 1394b camera per card.
IOI’s PCI Express adapter with integrated GOF port offers users the ability to connect AVT’s high end cameras, especially of the Stingray and Pike cameras with integrated GOF port, directly to their PC in a very simple way. This solution enables very long distance applications associated with the elimination of common ground problems without the use of external hubs. The card is equipped with a high quality optical transceiver with LCLC receptacles to bridge distances up to 500 m at 800 Mbps with 50 µm/125 µm multimode fiber. PCI Express bandwidth of up to 250 MByte/s1 ensures low latency transmission of the up to 64 MByte/s of video data at full speed from AVT’s 1394b cameras. Two additional 1394 bilingual connectors with screw locking enable the direct connection of 1394b cameras with copper interface. Marlin, Dolphin, Guppy and Oscar cameras can also be connected by the use of legacy cables.
1 Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
Highlights
Up to 64 MByte/s bus video bandwidth B signalling eliminates common ground Compliant with IEEE 1394b (2002) Backward compatible with IEEE 1394a (2000) Up to 800 Mbps @ 500 m cable length @
850 nm wavelength GOF port Class 1 laser safety compliant Multimode fiber 50 µm/125 µm up to
500 m or 62.5 µm/125 µm up to 200 m Easy plug & play, no driver required Led for optical connection on card Compatible with all AVT 1394b cameras Compatible with all AVT 1394a cameras by the use
of legacy cables
Compatible with all AVT Software Packages2 Power in connector to supply power Screw locking for 1394b ports
Feature Description Adapter type 1394b PCI Express Card with LCLC GOF port PCI Express chipset PLX Technologies: PEX8111-BB66BC 1394 chipset TI TSB82AA2 (link); TI TSB81BA3D (phy) Interface PCI Express, 1 lane Ports 2x 1394 bilingual3, screw locking4, supplying bus power (max. 1500 mA ) per
port; 1x Glass Optical Fiber (GOF) port with LCLC receptacles, removable dust protection for unused port5. Small form factor Gigabit optical transceiver with vertical cavity surface emitting laser (VCSEL) @ 850 nm. Supporting S800Beta/ S400Beta/ S200Beta/ S100Beta transfer modes6
Speed 100, 200, 400, 800 Mbps transfer rate Bandwidth 100/80/64 MByte/s at 800 Mbps (gross/net/video) # cameras (DMA’s) up to 4 (External repeater for more than 3 required) OS support Windows NT4.0, 2000 (FP only); XP, 20037, Linux 2.4.x/2.6.x8
Compliance FCC, CE, RoHS Directive (2002/95/EC), WEEE Directive (2002/96/EC), GOF-transceiver: UL 1950, class 1 laser safety compliant
Power 12 V – 32 V DC, supplying bus power, max. 1500 mA Operating temperature +5°C… 50°C Dimensions 135 mm x 120 mm Mass 80 g External power in 13 V – 32 V DC (big IDE 4-pin cable adapter included9) Options: cables GOF cables, various lengths and grades; copper cables various lengths, with
or without screw locking at both sides, sold separately
3 Bilingual ports can either operate in 1394b or 1394a, depending on the device (cable) attached. 4 Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 5 Dust protection has to be taken off before fiber cable can be connected. 6 With a 1394a camera or a computer port connected on the electrical side, the GOF port translates to 1394b language, but a 1394a speed (S400Beta/ S200Beta/ S100Beta), thus enabling long distance application and the elimination of the common ground. 7 DFP may require exchange of MS-driver, depending on service pack. 8 On request: Contact your local support. 9 External power is required, when connecting more than one 1394b camera via copper per card.
ALLIED VISION TECHNOLOGIES GMBH Design and specification of the described product(s) Taschenweg 2a | D-07646 Stadtroda | Germany are subject to change without notice. Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | [email protected]
Applications
up to 500 m Glass optical fiber
Pike with built-in GOF port
Remote power supply
AVT GOF hub
Legacy cabling Remote power supply
The total video bandwidth of the latter configuration is limited to 32 MByte/s due to the fact that the bus switches to 1394a speed. Ordering information: FWB1GLC-PCIE10 2x 1394b & GOF (DUPLEX LC) to PCI-Express Host Adapter, industrial K0000349 Cable options: GOF cable 10 m for optical repeater 62.5/125 µm, LCLC connector, indoor 10 m K1200095 GOF cable 30 m for optical repeater 62.5/125 µm, LCLC connector, indoor 30 m K1200087 GOF cable 50 m for optical repeater 62.5/125 µm, LCLC connector, indoor 50 m K1200085 GOF cable 100 m for optical repeater 62.5/125 µm, LCLC connector, indoor 100 m K1200086 GOF cable 150 m for optical repeater 62.5/125 µm, LCLC connector, indoor 150 m K1200088 GOF cable 200 m for optical repeater 62.5/125 µm, LCLC connector, indoor 200 m on request GOF cable 300 m for optical repeater 62.5/125 µm, LCLC connector, indoor 300 m on request GOF cable 400 m for optical repeater 62.5/125 µm, LCLC connector, indoor 400 m on request Cable 0.5 m 9-pin - 9-pin, industrial IEEE 1394b; 2x screw lock, 0.5 m, black, 2x ferrite K1200201 Cable 5.0 m 9-pin - 9-pin, industrial IEEE 1394b; 2x screw lock, 5.0 m, black, 2x ferrite K1200133 Cable 7.5 m 9-pin - 9 pin, industrial IEEE 1394b; 2x screw lock, 7.5 m, black, 2x ferrite K1200134 Cable 4.5 m 9-pin - 6-pin, industrial IEEE 1394b/a; 9-pin (screw lock) / 6-pin (latch), 4.5 m K1200171 Notes: Remote power supply needed either at camera or remote device. GOF cables with higher mechanical grades: Available upon request. Different locking cables available upon request.
AVT 1394 accessories 1394a dual bus PCI Express adapter
1394 FWX2-PCIE10
Your 1394a dual bus PCI Express adapter with two or four ports.
IOI’s dual 1394a bus PCI Express adapter with either two or four 1394a connectors offers users the ability to directly connect up to four cameras of its long range of 1394a cameras to their PC in a very simple way. Compared to single 1394a bus per card solutions, users save one slot in their system. PCI Express bandwidth of up to 250 MByte/s1 ensures low latency transmission of the up to 2x 32 = 64 MByte/s of video data at full speed from AVT’s Marlin, Dolphin, Guppy and Oscar cameras.
1 Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
Highlights
Up to 2x 32 = 64 MByte/s bus video bandwidth Compatible with IEEE 1394a (2000) Easy plug & play, no driver required Compatible with all AVT 1394a cameras
Compatible with all AVT Software Packages2 Power in connector to supply power Clamp locking for 1394a dual port possible
2 For details refer to the corresponding releases
AVT 1394 accessories 1394a dual bus PCI Express adapter
Technical Specifications
Feature Description Adapter type Two/four port dual 1394a bus card with PCI Express interface PCI Express chipset PLX Technologies: PEX8111-BB66BC 1394 chipset 2x TI TSB43AB22A (integrated link/phy) Interface PCI Express, 1 lane Ports 2x or 4x 1394a, supplying bus power (max. 1350 mA) per port Speed 100, 200, 400, Mbps transfer rate Bandwidth 2x 50/40/32 MByte/s at 400 Mbps (gross/net/video) # cameras (DMA’s) up to 2x 4 (External hubs for more than 4 required) OS support Windows NT4.0, 2000 (FP); XP, 2003; Linux 2.4.x/2.6.x (on request) Compliance FCC, CE, RoHS Directive (2002/95/EC), WEEE Directive (2002/96/EC) Power 12 V – 32 V DC, supplying bus power, max. 1500 mA Operating temp. +5°C… 50°C Dimensions 110 mm x 120 mm Mass 75 g External power in 13 V – 32 V DC (big IDE 4-pin cable adapter included) Options: cables copper cables various lengths, with or without clamp locking at both sides,
sold separately Ordering information: FWX2-PCIE10-2 Dual OHCI FireWire (2x IEEE 1394a) to PCI Express Host Adapters K0000344 FWX2-PCIE10-4 Dual OHCI FireWire (4x IEEE 1394a) to PCI Express Host Adapters K0000345 Cable options: Cable -2x Interlock IEEE1394a; (2x Interlock) 4.5 m, for Marlin / Oscar / Guppy K1200064 Cable -2x Interlock IEEE1394a; (2x Interlock) 10 m, for Marlin / Oscar / Guppy K1200163 Cable -2x Interlock IEEE1394a; (2x Interlock) 12.5 m, for Marlin / Oscar / Guppy K1200165 Cable -2x Interlock IEEE1394a; (2x Interlock) 17.5 m, for Marlin / Oscar / Guppy K1200162 Cable -1x Interlock IEEE1394a; (1x Interlock) 3.0 m, for Marlin / Oscar / Guppy K1200167 Cable -1x Interlock IEEE1394a; (1x Interlock) 4.5 m, for Marlin / Oscar / Guppy K1200091 Cable -1x Interlock IEEE1394a; (1x Interlock) 6.0 m, for Marlin / Oscar / Guppy K1200160 Cable -1x Interlock IEEE1394a; (1x Interlock) 7,5 m, for Marlin / Oscar / Guppy K1200212 Cable -1x Interlock IEEE1394a; (1x Interlock) 10 m, for Marlin / Oscar / Guppy K1200159 Notes: Cable locking at card side is not possible with four port card due to narrow spacing of ports (use 1x Interlock). Cable locking at card side is possible with two port card. (use 2x Interlock ). Molex clamp locking (aka Interlock) is suitable for AVT Marlin, Guppy, Oscar. Please consult AVT or your local dealer if you require locking connector for Dolphin or third party cameras.
IOI FW-PCIE1x20 PCI Express adapter offers users the ability to connect AVT’s broad 1394a camera range into their PC in a very simple way. PCI Express bandwidth of up to 250 MByte/s1 ensures low latency transmission of the up to 32 MByte/s of video data at full speed from AVT’s camera range. Two 1394a external connectors for the direct connection of AVT’s Marlin, Guppy or Oscar cameras make this universal interface card ideal for most modern PC’s. It also offers the possibility to use interlock cable.
1 Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
specification 250 MByte/s PCI express transfer bandwidth Compliant with IEEE 1394a (2000) 1394a data transfer rate up to 400 Mbit/s Easy plug & play Supports Windows OS; Linux OS and Mac OS Compatible with AVT’s 1394a camera families No extra driver needed for
- AVT FirePackage - AVT Fire4Linux (on request) - AVT Direct FirePackage
Additional power in connector to supply extra power for multi camera applications
Feature Description Adapter type 1394a PCI Express Host controller PCI Express chipset LSI FW533E-02 1394 chipset integrated in LSI FW533E-02; single OHCI Interface PCI Express, 1 lane Ports 2x 1394a external, supplying bus power (max. 1350 mA ) per port, but not
more than 1350 mA in total 1x 1394a internal,
Speed 100, 200, 400 Mbit/s transfer rate Bandwidth 50/40/32 MByte/s at 400 Mbit/s (gross/net/video) # cameras (DMA’s) up to 8 (External repeater for more than 2 required) OS support Windows XP, 2003, Vista, 7; Linux 2.6.x; Mac OS 10.4.8 or later Compliance FCC, CE, RoHS Directive (2002/95/EC), WEEE Directive (2002/96/EC) Power 12 V – 36V DC, supplying bus power, max. 1350 mA Operating temp. +5°C… 55°C External power in 13 V2 – 36 V DC Dimensions Low profile PCIe form factor Compatibility AVT FirePackage (FP), AVT Direct FirePackage (DFP), AVT Fire4Linux (on
request) Options: cables various lengths, with or without screw locking at camera side, sold separately
IOI’s economical low profile three port 1394a Card offers users the ability to externally connect up to two cameras of the AVT’s wide range of 1394a cameras such as Marlin, Dolphin, Guppy and Oscar with clamp locking cables to their PC in a very painless and simple way. PCI 32 Bit theoretical bandwidth1 of up to 132 MByte/s ensures low latency transmission of the up to 32 MByte/s of video data at full speed. This makes this economical interface card ideal for many space-critical applications with today’s PC’s.
1 Practical bandwidth is lower and dependent on individual systems/software conditions; M = Mega = 1.000.000
Highlights
Fully compliant with PCI 2.x at 3.3V and 5V signalling environment
Supports 33 MHz 32 bit specification Up to 132 MByte/s PCI transfer bandwidth Up to 32 MByte/s total 1394a bus bandwidth Up to four cameras (DMA’s) parallel acquisition
(bandwidth sharing) Compliant with IEEE 1394a (2000) 1394a data transfer rate up to 400 Mbit/s Easy plug & play Suitable for clamp locking cables Supports Windows and Linux O.S. Compatible with all AVT 1394a cameras Upwards compatible with AVT’s PIKE camera Compatible with
- AVT FirePackage - Avt Fire4Linux - AVT Direct FirePackage
Additional power in connector to supply extra power for multi camera applications
Feature Description Adapter type 1394a PCI 1394 chipset TI single chip Texas Instruments TSB43AB23 Interface PCI 2.x Ports 2x 1394a external 1x internal, supplying bus power (max. 1350 mA) per port,
but not more than 1500 mA in total Speed 100, 200, 400 Mbit/s transfer rate Bandwidth 50/40/32 MByte/s at 400 Mbit/s (gross/net/video) # cameras (DMA’s) <= 4 OS support Windows NT4 (FirePackage), 2000, XP, 2003, Linux 2.4.x/2.6.x Compliance FCC, CE, RoHS Power 8 – 36V DC, supplying bus power up to 1.5A max. Dimensions 120 mm x 120 mm (80 mm x 120 mm low profile) Mass 80 g External power in 12 V2 – 36 V DC (cable adapter included) Operating temp. +5°C … 50°C Compatibility AVT FirePackage, AVT Direct FirePackage, AVT Fire4Linux Options: cables various lengths, w or w/o clamp locking at either sides, sold separately
Ordering numbers: OHCI Triple Adapter IOI-FW3201 PCI-card OHCI IEEE1394, 3 connectors (2 extern, 1 intern) K0000361 slot bracket IOI BR-00194 low profile slot bracket for FW-PCI3201 (K0000361) K0000364 Cable-Options: Cable -2x Interlock IEEE1394a; (2x Interlock) 4.5 m, for Marlin / Oscar / Guppy K1200064 Cable -2x Interlock IEEE1394a; (2x Interlock) 10 m, for Marlin / Oscar / Guppy K1200163 Cable -2x Interlock IEEE1394a; (2x Interlock) 12.5 m, for Marlin / Oscar / Guppy K1200165 Cable -2x Interlock IEEE1394a; (2x Interlock) 17.5 m, for Marlin / Oscar / Guppy K1200162 Notes: Molex clamp locking (aka Interlock) is suitable for AVT Marlin, Guppy, Oscar. Please consult AVT or your local dealer if you require locking connector for Dolphin or third party cameras.
2 Parallel wiring of PC power supply is possible, that means ext. voltage must not exceed internal PCI bus voltage due to modified circuitry.
IOI’s 32/64 bit PCI adapter with integrated GOF port offers users the ability to connect AVT’s high end cameras, especially of the Stingray and Pike family with integrated GOF port, directly to their PC in a very simple way. This solution enables very long distance applications associated with the elimination of common ground problems without the use of external hubs. The card is equipped with a high quality optical transceiver with LCLC receptacles to bridge distances up to 500 m at 800 Mbps with 50 µm/125 µm multimode fiber. PCI 32/64 Bit theoretical bandwidth1 of up to 132/264 MByte/s ensures low latency transmission of the up to 64 MByte/s of video data at full speed from AVT’s 1394b cameras. Two additional 1394 bilingual connectors with screw locking enable the direct connection of 1394b cameras with copper interface. Marlin, Dolphin, Guppy and Oscar cameras can also be connected by the use of legacy cables.
1 Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
Highlights
Up to 64 MByte/s bus video bandwidth B signalling eliminates common ground Compliant with IEEE 1394b (2002) Backward compatible with IEEE 1394a (2000) Up to 800 Mbps @ 500 m cable length @
850 nm wavelength GOF port Class 1 laser safety compliant Multimode fiber 50 µm/125 µm up to
500 m or 62.5 µm/125 µm up to 200 m Easy plug & play, no driver required LED for optical connection on card Compatible with all AVT 1394b cameras Compatible with all AVT 1394a cameras by the use
of legacy cables
Compatible with all AVT Software Packages2 Power in connector to supply power Screw locking for 1394b ports
Feature Description Adapter type 1394b 32/84 bit PCI Card with LCLC GOF port 1394 chipset TI TSB82AA2 (link); TI TSB81BA3D (phy) Ports 2x 1394 bilingual3, screw locking , supplying bus power (max. 1500 mA ) per
port; 1x Glass Optical Fiber (GOF) port with LCLC receptacles, removable dust protection for unused port5. Small form factor Gigabit optical transceiver with vertical cavity surface emitting laser (VCSEL) @ 850 nm. Supporting S800Beta/ S400Beta/ S200Beta/ S100Beta transfer modes6
Speed 100, 200, 400, 800 Mbps transfer rate Bandwidth 100/80/64 MByte/s at 800 Mbps (gross/net/video) # cameras (DMA’s) up to 4 (External repeater for more than 3 required) OS support Windows NT4.0, 2000 (FP only); XP, 20037, Linux 2.4.x/2.6.x8
Compliance FCC, CE, RoHS directive (2002/95/EC), WEEE directive (2002/96/EC), GOF-transceiver: UL 1950, class 1 laser safety compliant
Power 12 V – 32 V DC, supplying bus power, max. 1500 mA Operating temperature +5°C… 50°C Dimensions 165 mm x 120 mm Mass 80 g External power in 13 V – 32 V DC (big IDE 4-pin cable adapter included9) Options: cables GOF cables, various lengths and grades; copper cables various lengths, with
or without screw locking at both sides, sold separately
3 Bilingual ports can either operate in 1394b or 1394a, depending on the device (cable) attached. 4 Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 5 Dust protection has to be taken off before fiber cable can be connected. 6 With a 1394a camera or a computer port connected on the electrical side, the GOF port translates to 1394b language, but a 1394a speed (S400Beta/ S200Beta/ S100Beta ), thus enabling long distance application and the elimination of the common ground. 7 DFP may require exchange of MS-driver, depending on service pack. 8 On request: Contact your local support. 9 External power is required, when connecting more than one Pike via copper per card.
AVT 1394 accessories 1394b / GOF PCI adapter
ALLIED VISION TECHNOLOGIES GMBH Design and specification of the described product(s) Taschenweg 2a | D-07646 Stadtroda | Germany are subject to change without notice. Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | [email protected]
Applications
up to 500 m Glass optical fiber
Pike with built-in GOF port
Remote power supply
AVT GOF hub
Legacy cabling Remote power supply
The total video bandwidth of the latter configuration is limited to 32 MByte/s due to the fact that the bus switches to 1394a speed. Ordering information: FWB1GLC-PCI01 2x 1394b & GOF (DUPLEX LC) to PCI Host Adapter, industrial K0000348 Cable options: GOF cable 10 m for optical repeater 62.5/125 µm, LCLC connector, indoor 10 m K1200095 GOF cable 30 m for optical repeater 62.5/125 µm, LCLC connector, indoor 30 m K1200087 GOF cable 50 m for optical repeater 62.5/125 µm, LCLC connector, indoor 50 m K1200085 GOF cable 100 m for optical repeater 62.5/125 µm, LCLC connector, indoor 100 m K1200086 GOF cable 150 m for optical repeater 62.5/125 µm, LCLC connector, indoor 150 m K1200088 GOF cable 200 m for optical repeater 62.5/125 µm, LCLC connector, indoor 200 m on request GOF cable 300 m for optical repeater 62.5/125 µm, LCLC connector, indoor 300 m on request GOF cable 400 m for optical repeater 62.5/125 µm, LCLC connector, indoor 400 m on request Cable 0.5 m 9-pin - 9-pin, industrial IEEE 1394b; 2x screw lock, 0.5 m, black, 2x ferrite K1200201 Cable 5.0 m 9-pin - 9-pin, industrial IEEE 1394b; 2x screw lock, 5.0 m, black, 2x ferrite K1200133 Cable 7.5 m 9-pin - 9 pin, industrial IEEE 1394b; 2x screw lock, 7.5 m, black, 2x ferrite K1200134 Cable 4.5 m 9-pin - 6-pin, industrial IEEE 1394b/a; 9-pin (screw lock) / 6-pin (latch), 4.5 m K1200171 Notes: Remote power supply needed either at camera or remote device. GOF cables with higher mechanical grades: Available upon request. Different locking cables available upon request.
IOI’s FWB-PCI02 adapter offers users the ability to securely connect AVT’s high end cameras, especially of the PIKE family, into their PC in a very simple way. PCI 32/64 Bit theoretical bandwidth1 of up to 132/264 MByte/s ensures low latency transmission of up to 64 MByte/s of video data at full speed from AVT’s Stingray or Pike cameras. Two 1394 bilingual connectors with screw locking allow the direct connection of two 1394b cameras. 1394a devices such as AVT’s Marlin, Dolphin, Guppy or Oscar family of cameras can be connected as well due to legacy cables converting from 9-pin to 6-pin connectors. This makes this two port interface adapter ideal for multi camera applications with today’s PCI-expansion-slot PCs.
1 Practical bandwidth is lower and dependent on individual
systems/software conditions. Mega = 1.000.000
Highlights
Fully compliant with PCI 2.x at 3.3 V and 5 V signalling environment
Supports 33 MHz 32/64 bit specification Up to 132/264 MByte/s transfer bandwidth Up to four cameras (DMA’s) parallel acquisition
(bandwidth sharing) Compliant with IEEE 1394b (2002) and backward
compatible with IEEE1394a (2000) 1394b data transfer rate up to 800 Mbps Easy plug & play Supports Windows and Linux Compatible with all AVT 1394b cameras Backward compatible with all AVT 1394a cameras
Compatible with all AVT Software Packages2 Additional power in connector to supply extra
Feature Description Adapter type 1394b PCI Card 1394 chipset TI TSB82AA2 (link); TI TSB81BA3 (phy) Ports 2x 1394 bilingual3, screw locking4, supplying bus power (max. 1500 mA ) per
port; Speed 100, 200, 400, 800 Mbps transfer rate Bandwidth 100/80/64 MByte/s at 800 Mbps (gross/net/video) # cameras (DMA’s) up to 4 (External repeater for more than 3 required) OS Support Windows NT4.0, 2000 (FP only); XP, 20035, Linux 2.4.x/2.6.x6
Compliance FCC, CE, RoHS Directive (2002/95/EC), WEEE Directive (2002/96/EC) Power 12 V – 32 V DC, supplying bus power, max. 1500 mA Operating temp. +5°C… 50°C Dimensions 165 mm x 120 mm Mass 80 g External power in 13 V – 32 V DC (big IDE 4-pin cable adapter included)7
Options: Cables GOF cables, various lengths and grades; copper cables various lengths, with or without screw locking at both sides, sold separately
Ordering information: PCI Adapter 1394b 2-port OHCI IEEE-1394b to PCI Host Adapter, industrial K0000347 Cable options: Cable 0.5 m 9-pin - 9-pin, industrial IEEE 1394b; 2x screw lock, 0.5 m, black, 2x ferrite K1200201 Cable 5.0 m 9-pin - 9-pin, industrial IEEE 1394b; 2x screw lock, 5.0 m, black, 2x ferrite K1200133 Cable 7.5 m 9-pin - 9 pin, industrial IEEE 1394b; 2x screw lock, 7.5 m, black, 2x ferrite K1200134 Cable 0.5 m 9-pin - 6-pin, industrial IEEE 1394b/a; 9-pin (screw lock)/6-pin (latch), 0.5 m K1200198 Cable 4.5 m 9-pin - 6-pin, industrial IEEE 1394b/a; 9-pin (screw lock)/6-pin (latch), 4.5 m K1200171 Notes: Different locking cables available upon request.
3 Bilingual ports can either operate in 1394b or 1394a, depending on the device (cable) attached. 4 Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 5 DFP may require exchange of MS-driver, depending on service pack. 6 On request: Contact your local support. 7 External power is required, when connecting more than one 1394b camera per card.
Your quad port dual 1394a adapter for the PCI bus.
IOI’s quad port dual 1394a adapter offers users the ability to directly connect up to four cameras of the AVT’s long range of 1394a cameras such as Marlin, Dolphin, Guppy and Oscar to their PC in a very simple way. PCI 32 Bit theoretical bandwidth1 of up to 132 MByte/s ensures low latency transmission of up to 2x 32 = 64 MByte/s of video data at full speed from multiple cameras. Two 1394a connectors per bus allow the direct connection of up to four 1394a cameras to this adapter. This makes this universal interface card ideal for high speed multi camera applications with today’s PC’s.
1 Practical bandwidth is lower and dependent on individual systems/software conditions
Highlights
Fully compliant with PCI 2.x at 3.3 V and 5 V signalling environment
Supports 33 MHz 32 bit specification Up to 132 MByte/s PCI transfer bandwidth Up to 64 MByte/s 1394a video bus bandwidth Two separate 1394a buses on one adapter Two ports per bus Up to eight cameras (DMA’s) parallel acquisition
(bandwidth sharing) Compliant with IEEE 1394a (2000) 1394a data transfer rate up to 400 Mbit/s Easy plug & play Supports Windows and Linux Compatible with all AVT 1394a cameras Upwards compatible with AVT PIKE camera
(@ 400 Mbit/s) Compatible with
- AVT FirePackage - AVT Fire4Linux (on request) - AVT Direct FirePackage
Additional power in connector to supply extra power for multi camera applications
AVT 1394 accessories 1394a adapter PCI bus
Technical Specifications
Feature Description Adapter type Dual 1394a PCI 1394 chipset 2x Ti TSB43AB21 (Integrated link/phy) Interface PCI 2.x # buses 2x 1394a bus Ports 4x 1394a, supplying bus power (max. 1350 mA), but not more than 1500 mA
in total Speed 100, 200, 400 Mbit/s transfer rate Bandwidth 50/40/32 MByte/s at 400 Mbit/s (gross/net/video) per bus # cameras (DMA’s) up to 8 (External repeater for more than 4 cameras required) OS Support Windows NT4.0, 2000, XP, 2003, Linux 2.4.x/2.6.x Compliance FCC, CE Power 12 V – 36 V DC, supplying bus power up to 1500 mA max. Dimensions 120 mm x 120 mm Mass 80 g External power in 13 V – 36 V DC (cable adapter included) Operating temp. +5°C … +50°C Compatibility AVT FirePackage, AVT Direct FirePackage, AVT Fire4Linux (on request) Options: cables various lengths, with or without locking on either side, sold separately
Ordering information: Dual OHCI Quad Adapter IOI-4601-22 PCI, 2 OHCI IEEE1394-buses, 4 connectors K0000207 Cable options: Cable -1x Interlock IEEE1394a; (1x Interlock) 3.0 m, for Marlin / Oscar / Guppy K1200167 Cable -1x Interlock IEEE1394a; (1x Interlock) 4.5 m, for Marlin / Oscar / Guppy K1200091 Cable -1x Interlock IEEE1394a; (1x Interlock) 6.0 m, for Marlin / Oscar / Guppy K1200160 Cable -1x Interlock IEEE1394a; (1x Interlock) 7,5 m, for Marlin / Oscar / Guppy K1200212 Cable -1x Interlock IEEE1394a; (1x Interlock) 10 m, for Marlin / Oscar / Guppy K1200159 Notes: Cable locking at card side is not possible due to narrow spacing of ports. Molex clamp locking (aka Interlock) is suitable for AVT Marlin, Guppy, Oscar. Please consult AVT or your local dealer if you require locking connector for Dolphin or third party cameras.
This PCI Express adapter with four external 1394b bilingual screw lock connectors is designed for high speed computer-based machine vision applications.
The PCIe-FIW64 provides four IEEE 1394b ports. Each port is supported by its own OHCI bus controller. This allows connecting up to 32 AVT cameras, especially Stingray and Pike (1394b). Marlin, Guppy and Oscar cameras can also be connected by the use of legacy cables.
The PCIe-FIW64 also includes four isolated programmable trigger output pulses to manage trigger events such as activating a strobe light.
Highlights
• 4 x 1394b ports with industrial screw lock connectors
• 4 x 1394b OHCI bus controllers • PCI Express® x4 compliant • Compliant with IEEE 1394b (2002) and
backward compatible with IEEE1394a (2000) • 1394b data transfer rate up to 800 MBit/s • Up to 32 cameras parallel acquisition
(bandwidth sharing) • Supports Windows Vista / XP/ XP embedded • Compatible with all AVT Software Packages1 • Power-in connector to directly supply power
to the 1394b bus
Digital and Trigger I/Os • Four isolated digital inputs and outputs • Four isolated trigger inputs and outputs 1 For details refer to the corresponding releases or contact your sales representative
4x 1394b ports with screw lock holes
4 OHCI
AVT 1394 accessories 1394b quad bus PCI Express adapter
Feature Description Adapter Type IEEE1394a/b <- -> PCI Express Interface x4 PCI Express Ports 4x 1394b bilingual, supplying up to 1A bus power when
externally powered1 Speed 4x100, 4x200, 4x400, 4x800 Mbit/s transfer rate Bandwidth 4x100/4x80/4x64 MByte/s at 800 Mbit/s
(gross/net/video) # cameras (DMA’s) Up to 32 (External hub for more than 4 required) Compliance RoHS Dimensions 129.5 x 111.15 mm Weight 60 g External power in 12 V HDD power supply connector Operating temp. +0 ° … 55 °Celsius
