HL-Hydraulik GmbH Kupferhütte 5C
D-57562 Herdorf E4 JUN17
Tel: +49 (0)2744-9324-0 web: www.hl-hydraulik.deFax: +49 (0)2744-9324-56 e-mail: [email protected]
ACCESSORIES FOR TUNDISH SYSTEMS
System Solutions for Industry
HP Pneumatics Water- and Special- Fluid Hydraulics Equipment for Road Safety Training Centres Accessories for Tundish Systems Fire Fighting Systems for Transformers Live Line Washing Systems for Insulators
HL Hydraulik GmbHKupferhütte 5c
57562 Herdorf
Telefon: +49 (0)27 44-93 24-0
Fax: +49(0)27 44-93 24-56
E-Mail: [email protected]
HP Pneumatic (Drucklufttechnik)VDEW empfohlene Druckluftsysteme und Komponenten
bis 350 bar
HP PneumaticElectrical Industry (VDEW) recommended systems
and components up to 350 bar
Wasser- und SonderhydraulikEdelstahl-Cartridgeventile und Vorsteuerungen bis 350 bar (800 bar),
Nennweiten 2 bis 250 mm Entzunderungsventile, Druck- und
Wegeventile, Sprühventile zur partiellen Walzenkühlung.
Water- and Special-Fluid HydraulicsStainless steel cartridges and pilot valves up to 350 bar
(optional 800 bar), size 2 to 250 mm (08-10 inch).
Descaling valves, directional, check, flow and pressure
control functions, spray valves for roll coolant systems.
www.hl-hydraulik.de
Technik für FahrsicherheitszentrenInnovative Technik zur Simulation kritischer Situationen im
Straßenverkehr: Schleuderplatten, Fahrbahnbewässerungen,
Wasserhindernissysteme
Equipment for Road Safety Training CentersTo simulate critical traffic situations.
Vehicle skidding devices, water film systems, water obstacles
Zubehör für GießpfannenschieberKomplette Schieber, Ersatz- und Verschleißteile
Accessories for Tundish SystemsComplete tundish valves, spares and maintenance parts
Feuerlöschsysteme für TransformatorenFremdenergie-unabhängige Wassersprühsysteme
Fire Fighting Systems for TransformersWater spraying systems for operation independent from an external power supply
IsolatorenreinigungssystemeStationäre Wassersprühsysteme zur Reinigung unter Spannung
Insulator Cleaning SystemsWater spraying systems for stationary live electrical line cleaning
SCHRUPP HL Hydraulik GmbHFLOCONFLOCON
R
www.hl-hydraulik.de
E4.1 JUN17 FLOCON
Kupferhütte 5C 57562 Herdorf
Tel 02744-9324-0 Fax 02744-9324-56
SLIDING GATE VALVES FOR LADLES
Single nozzle valves and spareparts
HP Pneumatics Water- and Special- Fluid Hydraulics Equipment for Road Safety Training Centres Accessories for Tundish Systems Fire Fighting Systems for Transformers Live Line Washing Systems for Insulators
SCHRUPP HL Hydraulik GmbHFLOCONFLOCON
R
www.hl-hydraulik.de
E4.2 JUN17 FLOCON
Kupferhütte 5C 57562 Herdorf
Tel 02744-9324-0 Fax 02744-9324-56
Sliding Gate System - FloCon Typ 42xx / 63xxHL Hydraulik GmbH is the only supplier of FLOCON products under the trade name SCHRUPP. Until 1990 SCHRUPP was an subsidiary company of Zimmermann & Jansen, Germany and was the first producer of FLOCON SLIDING GATE VALVES and SPAREPARTS. Continuous development and an experience of more than 20 years allows improvements to this program to follow the requirements of the market.
So we can offer "Original - FlOCON" products with a high quality standard to a favourable price. This Catalogue is only a overview of our product lists and spare parts.
Tundish System Typ 4200 / 6300
Typical Spareparts Clamping cylinder and connection
The movement of the sliding frame will be controlled by the cylinder which is coupled to the sliding frame.
SCHRUPP HL Hydraulik GmbHFLOCONFLOCON
R
www.hl-hydraulik.de
E4.3 JUN17 FLOCON
Kupferhütte 5C 57562 Herdorf
Tel 02744-9324-0 Fax 02744-9324-56
Mounting Plate The basic assembling sheet is crewed on the main frame which is welded to thundish bottom
Permanent Magnets (Holding System)The mounting plate are equipped with permanent magnets to keep the head disk in position. The magnets are fixed by headless bolts. During mainte-nance the retention force of the of the magnets has to be checked.
Tundish valve housing
The thundish valve housing guides the sliding frame
Floor plate for thundish valve housing withFixing Elements and Sliding Strips
Sliding Frame
Insert RingDuring operation the centering plate can be damaged. If this happens the insert ring has to be replaced.
SCHRUPP HL Hydraulik GmbHFLOCONFLOCON
R
www.hl-hydraulik.de
E4.4 JUN17 FLOCON
Kupferhütte 5C 57562 Herdorf
Tel 02744-9324-0 Fax 02744-9324-56
Floor plate - gliding frame withFixing Elements and Sliding Strips
Swivel Frame of closing system
Each vale includes a closing device on both sides. This elements are under permanent mechanically stress during stress during operation and must be checked regularly and replaced if necessary.
Thermodynamic- spring elements TD - Elements The basic assembling sheet are equipped with permanent magnets to keep the head disk in position. The magnets are fixed by headless bolts. During maintenance the retention force of the magnets has to be checked.
Test unit for thermodynamic- spring elements
�
SCHRUPP
�
������������ ���
ENTZUNDERUNGSTECHNIK DESCALING TECHNOLOGY
R
www.hl-hydraulik.de
DE2.5.1 AUG12 Wasserhydraulik
Kupferhütte 5C 57562 Herdorf
Tel 02744-9324-0 Fax 02744-9324-56
Kupferhütte 5c D 57562 Herdorf
Tel +49 (0)2744-9324-0 Fax +49 (0)2744-9324-56 [email protected]
www.hl-hydraulik.de
