Date post: | 25-Mar-2016 |
Category: |
Documents |
Upload: | total-trade-supplies |
View: | 213 times |
Download: | 0 times |
Ultra-high Capacity 4.0Ah Lithium Ion Batteries
Hitachi’s New 4.0Ah Tool Range
See over for the full Hitachi 4.0Ah range
Hitachi’s new 4.0Ah Lithium Ion technology gives cordless power tool users a massive increase in professional cordless tool performance:
• Hitachi provides DOUBLE THE RUNTIME per charge in Hitachi’s Brushless tools and 33% More Runtime per charge for Brushed Motor models*
• Lightweight & compact – same weight and size as Hitachi’s 3.0Ah Li-ion batteries
• Significantly longer overall battery pack life
• Fully compatible with all earlier model Hitachi ‘slide type’ cordless tools
• Packed with all the high-tech features you’ve come to expect from Hitachi Li-ion:
An entirely new ‘Pro Series’ now gives cordless power tool users a total range of 10 Heavy Duty 18 Volt models – all supplied standard with Ultra-high Capacity 4.0Ah batteries.
Hitachi’s new ‘Pro Series’ drills are more powerful than ever before – pushing out a massive 92Nm hard torque. And with the 4.0Ah batteries supplied, you get a third more run-time.*
Hitachi’s Premium EDT Brushless Drills are already renowned for their power – a result of less energy wasted through unnecessary friction and heat. Coupled with the new Ultra-high Capacity 4.0Ah batteries, Hitachi’s Brushless Motor technology gives you DOUBLE THE RUNTIME per charge.*
Plus, the new 4.0Ah batteries are compatible with ALL Hitachi 18V slide battery tools and accessories, putting over 25 models at your disposal. Add Hitachi slide bare tools to your 4.0Ah tool kit for a cost-effective way to create any cordless combo kit you like.
*compared to standard 3.0Ah brushed tools
* compared to conventional brushed models/3.0Ah Li-Ion battery
Over discharge protection Stops any individual cell from going into over discharge state, preventing cell damage and extending battery life
Overcharge protection Stops any cell going into overcharge state during charging, again preventing cell damage
Overload protection Stops the tool in the event of an overload situation, protecting the tool, the battery and the user
Overheat protection Stops the tool if the battery becomes too hot, preventing damage to the cells again extending the life of the battery
RANGE
4
2
DS18DBL
DS18DSDL DV18DSDL
Hitachi Fan-Cooled Smart Charging
Hitachi’s Fan-cooled Smart Chargers work intelligently when charging batteries to ensure safe electrical transfer and a long service life.
• Electronic circuitry onboard the charger communicates with the battery and monitors each individual cell during charging, preventing damage from overcharging or overheating
• Electronically controlled fan ensures that no cell is harmed during the charging process.
• Advanced fan-cooling system allows the batteries to be charged quickly, reducing down-time
Visit www.hitachipowertools.co.nz to find out more
Brushless Motor TechnologyHitachi’s Brushless technology delivers more performance and efficiency than ever before – the premium cordless solution for demanding trade applications.
• DOUBLE THE RUN TIME* – more holes, more screws, more efficiency
• MORE POWER and less wasted energy through unnecessary friction and heat
• LONGER LIFE and greater durability with smaller, lighter and more durable components
• HIGH PERFORMANCE – built in electronic controller and ‘step-less’ switch means the best speed is selected for each job, smoothly and precisely
* compared to conventional brushed models/3.0Ah Li-Ion battery
DS18DLCordless Li-ion Driver Drill
DS18DBLCordless Li-ion Driver Drill
107 HOLES
215 HOLES
RANGE
1
3
DV18DBL
Hitachi’s new ‘Pro Series’ drills are more powerful than ever before – pushing out a massive 92Nm hard torque. And with the 4.0Ah batteries supplied, you get a third more run-time.* Featuring all new heavy duty metal gear transmissions and 13mm steel-cased keyless chucks, these new drills have been built to do the hard yards and last the distance.
• All new Heavy Duty models – 92Nm Hard Torque output
• 13mm steel-cased keyless chuck with ratcheting feature and spindle lock
• 2-speed heavy duty alloy gearbox with steel gear transmission
• Variable speed and reverse
• 22-stage adjustable clutch
• Impact mode for concrete drilling (DV18DSDL only)
• LED light to illuminate work area
• Battery charge level indicator – to reduce unnecessary charging
• Featuring Hitachi’s unique Ultra-high Capacity 4.0Ah Li-ion batteries – giving 33% more runtime between charges*
• Fan-cooled Smart Charger – provides fast charging and ensures long battery life
• Supplied with 2x 4.0Ah batteries, smart charger, driver bit and robust carry case
18V PROSERIESDriver DrillDS18DSDL
18V PROSERIESImpact DrillDV18DSDL
DS18DSDL
DV18DSDL
PROSERIES
Visit www.hitachipowertools.co.nz to find out more
NEW
NEW
*compared to standard 3.0Ah brushed tools
18V PremiumBrushlessDriver DrillDS18DBL
18V PremiumBrushlessImpact DrillDV18DBL
PREMIUMBRUSHLESS
18V PremiumBrushlessImpact DriverWH18DBDL (1/4” hex drive)
18V PremiumBrushlessImpact WrenchWR18DBDL (1/2” square)
Hitachi’s high performance EDT Brushless motors deliver more power, greater top-end speed and DOUBLE THE RUN TIME*
• Max torque: 250Nm (WR18DBDL) 165Nm (WH18DBDL)
• Selective striking mode – continuous and single
• Low current-draw trigger control switch gives ‘stepless’ linear acceleration of motor
• 4-stage electronic speed switching
• Ultra-bright LED light to illuminate work area
• Supplied with 2x 4.0Ah Li-ion batteries, fan-cooled smart charger and robust carry case
• Full Load Impact Rate: 0-3200/min
• No Load Speed: 0-900, 1400, 2000, 2600/min
*compared to conventional brushed models/3.0Ah Li-ion battery
Socket not included.
Hitachi’s high performance EDT Brushless motors deliver more power, greater top-end speed and DOUBLE THE RUN TIME*
• Heavy duty 2-speed gearbox with metal gear transmission
• Heavy duty steel-cased keyless chuck with ratcheting feature and spindle lock
• Hard torque 86Nm
• Low current-draw trigger control switch gives ‘stepless’ linear acceleration of motor
• 8 preset speeds (via 2-speed gearbox and 4-stage electronic switching)
• 22-stage adjustable clutch
• Ultra-bright LED light to illuminate work area
• Supplied with 2x 4.0Ah Li-ion batteries, fan-cooled smart charger, driver bit and robust carry case
DS18DLCordless Li-ion Driver Drill
DS18DBLCordless Li-ion Driver Drill
107 HOLES
215 HOLES
20MM HOLES DRILLED IN 40MM PINE
Hitachi 4.0Ah Brushless Driver Drill vs.
Hitachi 3.0Ah Brushed Driver Drill
18.0V Twin PacksImpact Drill / Impact DriverKC18DKL
Driver Drill / Impact DriverKC18DLL
18.0V High Torque Impact WrenchWR18DSHL
18.0V Rotary Hammer DrillDH18DSL
18.0V CompactSeries Impact DrillDV18DSLNN
18.0V Impact DrillDV18DSFL(with Impact Model for concrete drilling)
18.0V Driver Drill DS18DSFL
18.0V CompactSeriesDriver DrillDS18DSL
18.0V Worksite RadioUR18DSL
• DV18DSDL ProSeries Impact Drill (KC18DKL)or• DS18DSDL ProSeries Driver Drill (KC18DLL)plus• WH18DSAL 145Nm Impact Driver• Supplied with 2x Hitachi Hi-Tech Ultra-high Capacity
4.0Ah Li-ion batteries, fan-cooled smart charger, driver bit and robust 2-tool carry case
• 480Nm max torque• Maximum no-load speed 1500rpm• Maximum capacity bolt: M22• Convenient rocker switch for forward/reverse• LED light to illuminate work area• Battery level indicator – for convenience
and to extend battery life• Supplied with 2x Hitachi Hi-Tech Ultra-high
Capacity 4.0Ah Li-ion batteries, fan-cooled smart charger and robust carry case
BARE TOOL - supplied without batteries, charger or case.• Digital tuner• High performance 83dB volume• Bass reflex speakers• MP3/iPod compatible• AC Adaptor provided• Can be powered by all standard size
Hitachi batteries – 9.6 - 18.0V• Cellphone charger feature – via USB output
BARE TOOL - supplied without batteries, charger or case.• Compact and lightweight• 13mm heavy duty steel-cased keyless chuck• Automatic spindle lock and ratchet feature• Impact mode for concrete drilling• 2 speed gearbox plus variable speed and reverse• 57Nm hard torque output• LED light to illuminate work area
• 2-speed gearbox plus variable speed control
• 22-stage adjustable clutch• 45Nm max torque
output (DV18DSFL)• 41Nm max torque
output (DS18DSFL)• Supplied with
2x Hitachi Hi-Tech 1.5Ah Li-ion batteries, fast charger and carry case
• 16mm capacity in concrete
• 2 mode action: Drill only and Hammer Drill
• Variable speed plus reverse• Lightweight – just 2.3kg• Supplied with 2x Hitachi Hi-Tech 3.0Ah Li-ion
batteries, fan-cooled smart charger and robust carry case
• 13mm heavy duty steel-cased keyless chuck
• Automatic spindle lock and ratchet feature
• 2 speed gearbox plus variable speed and reverse
• 57Nm hard torque output• Compact & lightweight – just 1.8kg• LED light to illuminate work area• Supplied with 2x Hitachi Hi-Tech 3.0Ah Li-ion
batteries, fan-cooled smart charger and robust carry case
18.0V Brushless Impact DriverWH18DBDLNNBARE TOOL - supplied without batteries, charger or case.(see Premium Brushless page for specifications)
www.hitachipowertools.co.nz
18.0V 115mm Angle GrinderG18DSL
• 115mm grinding wheel
• Anti restart mechanism
• Slide switch• Removable side handle• Supplied with 2x Hitachi Hi-Tech Ultra-high
Capacity 4.0Ah Li-ion batteries, fan-cooled smart charger and carry case
ALL BARE TOOLS FEATURED HERE COMPATIBLE WITH 18V SLIDE BATTERIES – 1.5AH, 3.0AH AND NEW 4.0AH
18.0V 115mm Angle GrinderG18DSLNNBARE TOOL - supplied without batteries, charger or case.(see G18DSL above for specifications)
18.0V High Torque Impact WrenchWR18DSHLNNBARE TOOL - supplied without batteries, charger or case.(see WR18DSHL above for specifications)
18.0V Brushless Impact WrenchWR18DBDLNNBARE TOOL - supplied without batteries, charger or case.(see Premium Brushless page for specifications)
*
*
*
*Socket not included.