REGUPOL® ACOUSTIC UNDERLAY COLLECTION
SOUNDPROOFINGTIMBER FLOORCOVERINGS
It’s our 30 years of trusted advice.
Together we can influence our cities successful future.With solutions to soundproofing floors in multi-residential living.
3
REGUPOL® ACOUSTIC SYSTEMS
The way we treat soundproofing of floor spaces has a big
impact on the well being of those that live amongst it. To play
our part, this is our BCA solutions for impact sound insulation
of floors. We have taken the most requested floor finishes and
matched them with the Regupol® Acoustic Underlay that best
suits the application. This is Regupol® Acoustics Systems…
simplified for timber floor coverings.
The BCA’s objectives are to the safeguard occupants in
residential buildings from illness or loss of amenity resulting
from excessive noise. The BCA Part F5.4 Sound insulation
rating of floors, requires a floor in a Class 2 or 3 building to
have an impact sound insulation rating of no less than Ln,w
62. The Ln,w rating is a measure of the ability of the floor
system to suppress footfall noise and noise from other impacts.
The lower this rating, the higher the impact sound reduction
performance of the system.
The BCA F5.3 Determination of Impact Sound Insulation
Ratings requires:
(a) A floor in a building required to have an impact sound
insulation rating must -
(i) have the required value for weighted normalised
impact sound pressure level (Ln,w) determined in
accordance with AS ISO 717.2 using results from
laboratory measurements; or
(ii) comply with Specification F5.2
These Regupol® Acoustic Systems have been tested in the
laboratory in accordance with AS ISO 717.2 “Acoustics – Rating
of sound insulation in buildings and of building elements”. For
impact sound insulation testing of floors AS ISO 717.2 Part 2.
Impact sound Insulation is used. They are typical residential
applications and are not exhaustive of our products and their
applications. Many other acoustic systems are available for
specific projects and acoustic outcomes. Contact us for further
resources and access to our acoustic library of products and
testing data.
Impact SoundproofingREGUPOL® » SOUNDPROOFING MULTI-RESIDENTIAL FLOORS
Regupol® a popular choice for multi-residential construction projects
Regupol® 4515 impact soundproofing of approved engineered timber and laminate floors
TIMBER FLOORSSOUNDPROOFING ENGINEERED TIMBER OR LAMINATE FLOORS WITH REGUPOL® 4515 4.5MM ACOUSTIC UNDERLAY
5
Regupol® 4515 4.5mm is manufactured from recycled PUR foam and cork
REGUPOL® 4515 4.5MMRegupol® 4515 a soundproofing acoustic underlay manufactured from high quality PUR foam granulates and cork, bound with polyurethane. This unique material composition produces a shore hardness which makes the acoustic underlay suitable to be installed directly under engineered timber and laminate floor finishes.
Benefits include: • German quality guaranteed • Minimises construction heights• Suitable for use with under floor heating• Protects expansion joints• Light weight material• PVC free• Excellent adhesion qualities• Low odour• Low VOC• Available in modular tiles for easy installation.• Made from recycled materials• Manufactured and certified to OHAS 18001:2007, DIN
ISO 9001:2008, DIN ISO 14001:2004 Management Systems
Product Data - Rolls and TilesRolls 1m x 20lmModular Tiles 1050mm x 500mmThickness 4.5mm
Typical application under approved engineered timber flooring
REGUPOL® » TIMBER FLOORS
REPORT RG086 - REGUPOL® 4515 4.5MM
Layer of 14mm Engineered Timber (floating), to 4515 4.5mm, to 150mm Concrete Slab (no ceiling).
Ln,w 60 dBImprovement∆Lw 17dB
IIC 50Complies with BCA Part F5.3 Impact
Sound
Engineered Timber Normalized Impact Sound Pressure Levels Tested at CSIRO Clayton, in accordance with ISO 140-8: 2006 (E), ISO 140-6-2006, AS ISO 717.2-2004, ASTM E989-89. Test area 10.8m².Results can vary when different floors are installed and/or if bonded.
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150 Hz
Nor
mal
ized
Impa
ct S
ound
Pre
ssur
e Le
vel,
L'n,
dB
Bare Slab Engineered Timber Plank to 4515 4.5mm
6
with Regupol® 4515 4.5mm
This system reflects a typical residential application with approved Engineered Timber Floor Covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
Regupol® 4515 4.5mm Acoustic Underlay
Approved Engineered Timber Flooring
4
2
1
Concrete Substrate Prepared to AS1884-2012
WALL SURFACE
SKIRTING
FOAM BACKING ROD
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
ENGINEERED TIMBER FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
14MM APPROX.
4.5MM
REGUPOL® 4515 4.5mm THICK IMPACT SOUND ACOUSTIC UNDERLAY BUTT JOINED, CUT TO PERIMETER
CONCRETE SUBSTRATEPREPARED TO AS 1884-2012
USE GREEN REGUPOL TAPEON REGUPOL® 4515 4.5MM JOINSEXPANSION GAP MIN. 10mm OR
AS PER MANUFACTURERSRECOMMENDATIONS
MIN 2mmCLEARANCE
3
Tape & Sealer Information
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels.
Regupol Green Tape
Regupol Green Tape is a single sided 72mm wide by 25m long cloth tape, used to join loose laid acoustic underlay.
REGUPOL® » TIMBER FLOORS
FLOATINGENGINEERED TIMBER
7REGUPOL® » TIMBER FLOORS
DUAL BONDENGINEERED TIMBER
with Regupol® 4515 4.5mm
This system reflects a typical residential application with approved Engineered Timber Floor Covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
Regupol One Part Polyurethane Adhesive
Regupol® 4515 4.5mm Acoustic Underlay
Approved Engineered Timber Floor
Regupol One Part Polyurethane Adhesive
5
4
3
2
1
Adhesive and Sealer Information
Regupol One Part Polyurethane Adhesive is an elastomeric moisture cured, solvent free polyurethane adhesive. The adhesive is suitable for internal and external wet and dry areas.
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels. Concrete Substrate Prepared to AS1884-2012
WALL SURFACE
SKIRTING
FOAM BACKING ROD
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
ENGINEERED TIMBER FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
14MM APPROX.
4.5MM
REGUPOL® 4515 4.5mm THICK IMPACT SOUND ACOUSTIC UNDERLAY ADHERED TO SUBSTRATE BUTT JOINED, CUT TO PERIMETER
CONCRETE SUBSTRATEPREPARED TO AS 1884-2012
REGUPOL ONE PART POLYURETHANE ADHESIVEEXPANSION GAP MIN. 10mm OR
AS PER MANUFACTURERSRECOMMENDATIONS
MIN 2mmCLEARANCE
REGUPOL ONE PART POLYURETHANE ADHESIVE
Regupol® 5512 impact sound solutions for Engineered Timber and Laminate Floors
TIMBER FLOORSSOUNDPROOFING ENGINEERED TIMBER OR LAMINATE FLOORS WITH REGUPOL® 5512 5MM ACOUSTIC UNDERLAY
9
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150 Hz
Nor
mal
ized
Impa
ct S
ound
Pre
ssur
e Le
vel,
L'n,
dB
Bare Slab Engineered to 5512
Regupol® 5512 is manufactured with recycled materials
REGUPOL® 5512 5MMRegupol® 5512 is a soundproofing acoustic underlay manufactured from recycled materials, bound with polyurethane. The product composition produces a cost effective solution to sound isolate bonded screed beds in wet and dry area installations. The product is also used under a number of hard flooring finishes such as laminates and engineered timber flooring.
Benefits include: • German quality guaranteed• Minimises construction heights• Suitable for use with under floor heating• Protects expansion joints• PVC free• Available in modular tiles for easy installation• Made from recycled materials• Manufactured and certified to OHAS 18001:2007, DIN
ISO 9001:2008, DIN ISO 14001:2004 Management Systems
Product Data - Rolls and TilesRolls 1.25m x 10lm, 50lmModular Tiles 1050mm x 500mmThickness 5mm
Typical application under engineered timber and laminate flooring
REGUPOL® » TIMBER FLOORS
REPORT RG111 - REGUPOL® 5512 5MM
Layer of 14mm Engineered Timber (floating), to Regupol® 5512 5mm, to 150mm Concrete Slab (no ceiling).
Ln,w 58 dBImprovement∆Lw 18dB
IIC 52Complies with BCA Part F5.3 Impact
Sound
Engineered Timber Normalized Impact Sound Pressure Levels Tested at CSIRO Clayton, in accordance with ISO 140-8: 2006 (E), ISO 140-6-2006, AS ISO 717.2-2004, ASTM E989-89. Test area 10.8m². Results can vary when different floors are installed and/or if bonded.
10REGUPOL® » TIMBER FLOORS
with Regupol® 5512 5mm
This system reflects a typical residential application with approved Engineered Timber Floor Covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
WALL SURFACE
SKIRTING
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALER MUST BE USED
ENGINEERED TIMBER OR LAMINATE FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
MIN 2mmCLEARANCE
14mm APPROX.
5mm
CONCRETE SUBSTRATEPREPARED TO AS1884-2012
EXPANSION GAP MIN. 10mm ORAS PER MANUFACTURERSRECOMMENDATIONS
USE REGUPOL GREEN TAPEON REGUPOL® 5512 JOINS
REGUPOL® 5512 5mm THICK IMPACT SOUND ACOUSTIC UNDERLAY, BUTT JOINED, CUT TO PERMIETER
FOAM BACKING ROD
Regupol® 5512 5mm Acoustic Underlay
Approved Engineered Timber or Laminate Flooring
2
1
Concrete Substrate Prepared to AS1884-20124
3
Tape & Sealer Information
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels.
Regupol Green Tape
Regupol Green Tape is a single sided 72mm wide by 25m long cloth tape, used to join loose laid acoustic underlay.
FLOATING TIMBERENGINEERED OR LAMINATE
11REGUPOL® » TIMBER FLOORS
with Regupol® 5512 5mm
This system reflects a typical residential application with approved Engineered Timber Floor Covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
Regupol One Part Polyurethane Adhesive
Regupol® 5512 5mm Acoustic Underlay
Approved Engineered Timber or Laminate Floor
Regupol One Part Polyurethane Adhesive
5
4
3
2
1
WALL SURFACE
SKIRTING
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE SEALANT MUST BE USED
ENGINEERED TIMBER OR LAMINATE FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
MIN 2mmCLEARANCE
14mm APPROX.
5mm
CONCRETE SUBSTRATEPREPARED TO AS1884-2012
EXPANSION GAP MIN. 10mm ORAS PER MANUFACTURERSRECOMMENDATIONS
REGUPOL ONE PART POLYURETHANE ADHESIVE
REGUPOL® 5512 5mm THICK IMPACT SOUND ACOUSTIC UNDERLAY ADHERED TO SUBSTRATE, BUTT JOINED, CUT TO PERMIETER
FOAM BACKING ROD
REGUPOL ONE PART POLYURETHANE ADHESIVE
Adhesive and Sealer Information
Regupol One Part Polyurethane Adhesive is an elastomeric moisture cured, solvent free polyurethane adhesive. The adhesive is suitable for internal and external wet and dry areas.
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels. Concrete Substrate Prepared to AS1884-2012
DUAL BOND TIMBERENGINEERED OR LAMINATE
Regupol® K225 5mm impact sound insulation for parquetry timber - direct fix
TIMBER FLOORSSOUNDPROOFING PARQUETRY AND ENGINEERED TIMBER FLOORS WITH REGUPOL® K225 5MM ACOUSTIC UNDERLAY
13
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150 Hz
Nor
mal
ized
Impa
ct S
ound
Pre
ssur
e Le
vel,
L'n,
dB
Bare Slab Parquetry to K225 5mm
Regupol® K225 is manufactured from recycled cork and SBR rubber
REGUPOL® K225 5MMRegupol® K225 is a soundproofing acoustic underlay manufactured from recycled SBR rubber granulates and cork, bound with polyurethane. The product composition produces an effective acoustic barrier to install parquetry and timber floors directly to the surface finish. The cork and rubber combination ensures excellent adhesion between the polyurethane adhesive, the acoustic underlay and the timber floor.
Benefits include: • German quality guaranteed• Minimises construction heights• Suitable for use with under floor heating• Protects expansion joints• PVC Free• Available in modular tiles for easy installation• Excellent adhesion qualities• Made from recycled materials• Manufactured and certified to OHAS 18001:2007, DIN
ISO 9001:2008, DIN ISO 14001:2004 Management Systems
Product Data - Rolls and TilesRolls 1m x 20lmModular Tiles 1050mm x 500mmThickness 5mm
Typical application under parquetry and engineered timber
REGUPOL® » TIMBER FLOORS
REPORT RG019 - REGUPOL® K225 5MM
Layer of 19mm Parquetry, bonded to Regupol® K225 5mm, bonded to 150mm Bare Concrete Slab (no ceiling).
Ln,w 56 dBImprovement∆Lw 20dB
IIC 54Complies with BCA Part F5.3 Impact
Sound
Parquetry Timber Normalized Impact Sound Pressure Levels Tested at CSIRO Highett, in accordance with ISO 140-8: 1997 (E), ISO 140-6, AS ISO 717.2-2004, ASTM E989-89. Test area 11.7m². Results can vary when different floors are installed and/or if bonded.
14REGUPOL® » TIMBER FLOORS
with Regupol® K225 5mm
This system reflects a typical residential application with approved parquetry timber floors. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
Concrete Substrate Prepared to AS1884-2012
Regupol One Part Polyurethane Adhesive
Regupol® K225 5mm Acoustic Underlay
Approved Parquetry Floor 14mm or 19mm
Regupol One Part Polyurethane Adhesive
REGUPOL ONE PART POLYURETHANE ADHESIVE TROWEL APPLIED TO ADHERE UNDERLAY TO SUBSTRATE
WALL SURFACE
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
MINIMUM 2mmCLEARANCE
14mm OR 19mm SOLID BLOCK PARQUETRYINSTALLED AS PER MANUFACTURERSRECOMMENDATIONS
FOAM BACKING ROD
SKIRTING
14 OR 19mm
1mm NOMINAL
5mm
CONCRETE SUBSTRATEPREPARED TO AS1884-2012
REGUPOL ONE PART POLYURETHANEADHESIVE TO ADHERE PARQUETRY TOREGUPOL® K225 UNDERLAY
REGUPOL® K225 5mm THICK IMPACT SOUND ACOUSTIC UNDERLAY ADHERED TO SUBSTRATE, BUTT JOINED, CUT TO PERMIETER
EXPANSION GAP MIN. 10mm OR AS PER MANUFACTURERSRECOMMENDATIONS
5
4
3
2
1
Regupol One Part Polyurethane Adhesive is an elastomeric moisture cured, solvent free polyurethane adhesive. The adhesive is suitable for internal and external wet and dry areas.
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels.
Adhesive and Sealer Information
DUAL BONDPARQUETRY TIMBER
15REGUPOL® » TIMBER FLOORS
DUAL BONDENGINEERED TIMBER
with Regupol® K225 5mm
This system reflects a typical residential application with approved Engineered Timber Floors. For all other applications please contact Regupol’s Technical Division. Please note that drawings are not to scale and are for illustration purposes only.
Regupol® K225 5mm Acoustic Underlay
Approved Engineered Timber Floor
Regupol One Part Polyurethane Adhesive
5
3
2
1
Adhesive and Sealer Information
Concrete Substrate Prepared to AS1884-2012
WALL SURFACE
SKIRTING
FOAM BACKING ROD
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
ENGINEERED TIMBER FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
14MM APPROX.
5MM
REGUPOL® K225 5mm THICK IMPACT SOUND ACOUSTIC UNDERLAY ADHERED TO SUBSTRATE BUTT JOINED, CUT TO PERIMETER
CONCRETE SUBSTRATEPREPARED TO AS1884-2012
REGUPOL ONE PART POLYURETHANE ADHESIVEEXPANSION GAP MIN. 10mm OR
AS PER MANUFACTURERSRECOMMENDATIONS
MIN 2mmCLEARANCE
REGUPOL ONE PART POLYURETHANE ADHESIVE
Regupol One Part Polyurethane Adhesive4
Regupol One Part Polyurethane Adhesive is an elastomeric moisture cured, solvent free polyurethane adhesive. The adhesive is suitable for internal and external wet and dry areas.
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels.
Regupol® 6015 6/3mm dimple acoustic underlay under approved engineered timber floors
TIMBER FLOORSSOUNDPROOFING ENGINEERED TIMBER FLOORS WITH REGUPOL® 6015 6/3MM ACOUSTIC UNDERLAY
17
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150 Hz
Nor
mal
ized
Impa
ct S
ound
Pre
ssur
e Le
vel,
L'n,
dB
Bare Slab Engineered to 6015 6-3
Regupol® 6015 is manufactured using recycled SBR rubber
REGUPOL® 6015 6/3MMRegupol® 6015 dimple is a soundproofing acoustic underlay manufactured from recycled SBR rubber, bound with polyurethane. The product is made to a specific density and finished in 3D dimple profile. Regupol® 6015 dimple is a soundproofing acoustic underlay designed to isolate approved floor finishes from the main structure of the building, reducing impact energy generated by general footfall.
Benefits include: • German quality guaranteed • Minimises construction heights• Suitable for use with under floor heating• Protects expansion joints• PVC free• Made from recycled materials• Manufactured and certified to OHAS 18001:2007, DIN
ISO 9001:2008, DIN ISO 14001:2004 Management Systems
Product Data - RollsRolls 1.25m x 20lmThickness 6mm dimpled profile 6/3mm
Typical application under approved engineered timber floors
REGUPOL® » TIMBER FLOORS
REPORT RG113 - REGUPOL® 6015 6/3MM
Layer of 14mm Engineered Timber (floating), to Regupol® 6015 6/3mm dimpled, to 150mm Concrete Slab (no ceiling).
Ln,w 58 dBImprovement∆Lw 17dB
IIC 51Complies with BCA Part F5.3 Impact
Sound
Engineered Timber Normalized Impact Sound Pressure Levels Tested at CSIRO Clayton, in accordance with ISO 140-8: 2006 (E), ISO 140-6-2006, AS ISO 717.2-2004, ASTM E989-89. Test area 10.8m²Results can vary when different floors are installed and/or if bonded.
18
with Regupol® 6015 6/3mm
This system reflects a typical residential application with approved Engineered Timber Floor Covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
WALL SURFACE
SKIRTING
FOAM BACKING ROD
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
APPROVED ENGINEERED TIMBER FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
14MM APPROX.
6MM
REGUPOL® 6015 6/3mm THICK DIMPLED IMPACT SOUND ACOUSTIC UNDERLAY, BUTT JOINED, CUT TO PERIMETER
CONCRETE SUBSTRATEPREPARED TO AS1884-2012
EXPANSION GAP MIN. 10mm ORAS PER MANUFACTURERSRECOMMENDATIONS
MIN 2mmCLEARANCE
USE REGUPOL GREEN TAPE ON REGUPOL® 6015 6/3mm JOINS
Regupol® 6015 6/3mm Acoustic Underlay
Approved Engineered Timber Flooring
2
1
Concrete Substrate Prepared to AS1884-20124
3
Tape & Sealer Information
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels.
Regupol Green Tape
Regupol Green Tape is a single sided 72mm wide by 25m long cloth tape, used to join loose laid acoustic underlay.
REGUPOL® » TIMBER FLOORS
FLOATINGENGINEERED TIMBER
Please Note: Not all Engineered Timber Floors are approved over the dimpled acoustic underlay. Contact Regupol Australia to check compatibility with the selected Engineered Board.
19
with Regupol® 6015 6/3mm
This system reflects a typical residential application with approved bamboo floor covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
Regupol One Part Polyurethane Adhesive
Regupol® 6015 6/3mm Acoustic Underlay
Approved Engineered Timber Flooring
Regupol One Part Polyurethane Adhesive
5
4
3
2
1
Adhesive and Sealer Information
Regupol One Part Polyurethane Adhesive is an elastomeric moisture cured, solvent free polyurethane adhesive. The adhesive is suitable for internal and external wet and dry areas.
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels.
WALL SURFACE
SKIRTING
FOAM BACKING ROD
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
APPROVED ENGINEERED TIMBER FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
14MM APPROX.
6MM
REGUPOL® 6015 6/3mm THICK DIMPLED IMPACT SOUND ACOUSTIC UNDERLAY ADHERED TO SUBSTRATE BUTT JOINED, CUT TO PERIMETER
CONCRETE SUBSTRATEPREPARED TO AS 1884-2012
REGUPOL ONE PARTPOLYURETHANE ADHESIVE
EXPANSION GAP MIN. 10mm ORAS PER MANUFACTURERSRECOMMENDATIONS
MIN 2mmCLEARANCE
REGUPOL ONE PART POLYURETHANE ADHESIVE
Concrete Substrate Prepared to AS1884-2012
REGUPOL® » TIMBER FLOORS
DUAL BOND ENGINEERED TIMBER
Please Note: Not all Engineered Timber Floors are approved over the dimpled acoustic underlay. Contact Regupol Australia to check compatibility with the selected Engineered Board.
Regupol® 6010 8/4mm dimple impact soundproofing under approved engineered timber floors
TIMBER FLOORSSOUNDPROOFING APPROVED ENGINEERED TIMBER FLOORING WITH REGUPOL® 6010 8/4MM ACOUSTIC UNDERLAY
21REGUPOL® » TIMBER FLOORS
Regupol® 6010 is manufactured using recycled SBR rubber
REGUPOL® 6010 8/4MMRegupol® 6010 dimple is a soundproofing acoustic underlay manufactured from recycled SBR rubber, bound with polyurethane. The finished product is technically superior when it comes to installing approved engineered timber floors. The dimple profile allows for the impact sound generated to dissipate and effectively reduce.
Benefits include: • German quality guaranteed• Minimises construction heights• Suitable for use with under floor heating• Protects expansion joints• PVC free• Made from recycled materials• Manufactured and certified to OHAS 18001:2007, DIN
ISO 9001:2008, DIN ISO 14001:2004 Management Systems
Product Data - RollsRolls 1.15m x 20lmThickness 8mm dimpled profile 8/4mm
Typical application under approved engineered timber floors
REPORT RG112 - REGUPOL® 6010 8/4MM
Layer of 14mm Engineered Timber (floating), to Regupol® 6010 8/4mm dimpled, to 150mm Concrete Slab (no ceiling).
Ln,w 57 dBImprovement∆Lw 18dB
IIC 53Complies with BCA Part F5.3 Impact
Sound
Engineered Timber Normalized Impact Sound Pressure Levels Tested at CSIRO Clayton, in accordance with ISO 140-8: 2006 (E), ISO 140-6-2006, AS ISO 717.2-2004, ASTM E989-89. Test area 10.8m²Results can vary when different floors are installed and/or if bonded.
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150 Hz
Nor
mal
ized
Impa
ct S
ound
Pre
ssur
e Le
vel,
L'n,
dB
Bare Slab Engineered to 6010 8-4
22REGUPOL® » TIMBER FLOORS
FLOATINGENGINEERED TIMBER
with Regupol® 6010 8/4mm
This system reflects a typical residential application with approved Engineered Timber Floor Covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
WALL SURFACE
SKIRTING
FOAM BACKING ROD
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
ENGINEERED TIMBER FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
14MM APPROX.
8MM
REGUPOL® 6010 8/4mm THICK DIMPLED IMPACT SOUND ACOUSTIC UNDERLAY, BUTT JOINED, CUT TO PERIMETER
CONCRETE SUBSTRATEPREPARED TO AS1884-2012
EXPANSION GAP MIN. 10mm ORAS PER MANUFACTURERSRECOMMENDATIONS
MIN 2mmCLEARANCE
USE REGUPOL GREEN TAPE ON REGUPOL® 6010 8/4mm JOINS
Regupol® 6010 8/4mm Acoustic Underlay
Approved Engineered Timber Flooring
2
1
Concrete Substrate Prepared to AS1884-20124
3
Tape & Sealer Information
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels.
Regupol Green Tape
Regupol Green Tape is a single sided 72mm wide by 25m long cloth tape, used to join loose laid acoustic underlay.
Please Note: Not all Engineered Timber Floors are approved over the dimpled acoustic underlay. Contact Regupol Australia to check compatibility with the selected Engineered Board.
23REGUPOL® » TIMBER FLOORS
DUAL BONDENGINEERED TIMBER
with Regupol® 6010 8/4mm
This system reflects a typical residential application with approved Engineered Timber Floor Covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
Regupol One Part Polyurethane Adhesive
Regupol® 6010 8/4mm Acoustic Underlay
Approved Engineered Timber Floor
Regupol One Part Polyurethane Adhesive
5
4
3
2
1
Adhesive and Sealer Information
Regupol One Part Polyurethane Adhesive is an elastomeric moisture cured, solvent free polyurethane adhesive. The adhesive is suitable for internal and external wet and dry areas.
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels. Concrete Substrate Prepared to AS1884-2012
WALL SURFACE
SKIRTING
FOAM BACKING ROD
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
ENGINEERED TIMBER FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
14MM APPROX.
8MM
REGUPOL® 6010 8/4mm THICK DIMPLED IMPACT SOUND ACOUSTIC UNDERLAY ADHERED TO SUBSTRATE BUTT JOINED, CUT TO PERIMETER
CONCRETE SUBSTRATEPREPARED TO AS1884-2012
EXPANSION GAP MIN. 10mm ORAS PER MANUFACTURERSRECOMMENDATIONS
MIN 2mmCLEARANCE
REGUPOL ONE PARTPOLYURETHANE ADHESIVE
REGUPOL ONE PART POLYURETHANE ADHESIVE
Please Note: Not all Engineered Timber Floors are approved over the dimpled acoustic underlay. Contact Regupol Australia to check compatibility with the selected Engineered Board.
Regupol® 6010 10mm impact soundproofing engineered timber and laminate floors
TIMBER FLOORSSOUNDPROOFING ENGINEERED TIMBER AND LAMINATE FLOORS WITH REGUPOL® 6010 10MM ACOUSTIC UNDERLAY
25
Regupol® 6010 is manufactured using recycled SBR rubber
REGUPOL® 6010 10MMRegupol® 6010 is a soundproofing acoustic underlay manufactured from recycled SBR rubber, bound with polyurethane. The product is a popular choice under floating timber floors, offering improved impact sound noise levels up to 20dB. Regupol® 6010 10mm is a soundproofing acoustic underlay designed to isolate approved floor finishes from the main structure of the building, reducing impact energy generated by general footfall.
Benefits include:• German quality guaranteed Minimises construction
heights• Suitable for use with under floor heating• Protects expansion joints• PVC free• Made from recycled materials• Manufactured and certified to OHAS 18001:2007, DIN
ISO 9001:2008, DIN ISO 14001:2004 Management Systems
Product Data - RollsRolls 1.25m x 20lmThickness 10mm
Typical application under engineered timber floor
REGUPOL® » TIMBER FLOORS
REPORT RG087 - REGUPOL® 6010 10MM
Layer of 14mm Engineered Timber (floating), to Regupol® 6010 10mm, to 150mm Concrete Slab (no ceiling).
Ln,w 58 dBImprovement∆Lw 18dB
IIC 50Complies with BCA Part F5.3 Impact
Sound
Engineered Timber Normalized Impact Sound Pressure Levels Tested at CSIRO, in accordance with ISO 140-8: 2006 (E), ISO 140-6-2006, AS ISO 717.2-2004, ASTM E989-89. Test area 10.8m²Results can vary when different floors are installed and/or if bonded.
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150 Hz
Nor
mal
ized
Impa
ct S
ound
Pre
ssur
e Le
vel,
L'n,
dB
Bare Slab Engineered Timber Plank to 6010 10mm
26REGUPOL® » TIMBER FLOORS
with Regupol® 6010 10mm
This system reflects a typical residential application with approved Engineered Timber Floor Covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
Regupol® 6010 10mm Acoustic Underlay
Approved Engineered Timber or Laminate Flooring
4
2
1
Concrete Substrate Prepared to AS1884-2012
WALL SURFACE
SKIRTING
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
ENGINEERED TIMBER OR LAMINATE FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
MIN 2mmCLEARANCE
14mm APPROX.
10mm
CONCRETE SUBSTRATEPREPARED TO AS 1884-2012
EXPANSION GAP MIN. 10mm ORAS PER MANUFACTURERSRECOMMENDATIONS
USE REGUPOL GREEN TAPE ONREGUPOL® 6010 10mm JOINS
REGUPOL® 6010 10mm THICK IMPACT SOUND ACOUSTIC UNDERLAY,BUTT JOINED, CUT TO PERMIETER
FOAM BACKING ROD
3
Tape & Sealer Information
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels.
Regupol Green Tape
Regupol Green Tape is a single sided 72mm wide by 25m long cloth tape, used to join loose laid acoustic underlay.
FLOATING TIMBERENGINEERED OR LAMINATE
27REGUPOL® » TIMBER FLOORS
with Regupol® 6010 10mm
This system reflects a typical residential application with approved Engineered Timber Floor Covering. For all other applications please contact Regupol’s Technical Division. Please note that the drawings are not to scale and are for illustration purposes only.
Regupol One Part Polyurethane Adhesive
Regupol® 6010 10mm Acoustic Underlay
Approved Engineered Timber or Laminate Flooring
Regupol One Part Polyurethane Adhesive
5
4
3
2
1
Adhesive and Sealer Information
Regupol One Part Polyurethane Adhesive is an elastomeric moisture cured, solvent free polyurethane adhesive. The adhesive is suitable for internal and external wet and dry areas.
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels. Concrete Substrate Prepared to AS1884-2012
WALL SURFACE
SKIRTING
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
ENGINEERED TIMBER OR LAMINATE FLOOR INSTALLED ASPER MANUFACTURERS RECOMMENDATIONS
MIN 2mmCLEARANCE
14mm APPROX.
10mm
CONCRETE SUBSTRATEPREPARED TO AS 1884-2012
EXPANSION GAP MIN. 10mm ORAS PER MANUFACTURERSRECOMMENDATIONS
REGUPOL ONE PART POLYURETHANE ADHESIVE
REGUPOL® 6010 10mm THICK IMPACT SOUND ACOUSTIC UNDERLAY ADHERED TO SUBSTRATE, BUTT JOINED, CUT TO PERMIETER
FOAM BACKING ROD
REGUPOL ONE PART POLYURETHANE ADHESIVE
DUAL BOND TIMBERENGINEERED OR LAMINATE
Regupol® 6010 17/8mm dimple for high impact acoustic performance under T&G and plywood timber system
TIMBER FLOORSSOUNDPROOFING T&G TIMBER AND PLYWOOD FLOORSWITH REGUPOL® 6010 17/8MM ACOUSTIC UNDERLAY
29
Regupol® 6010 17/8mm is manufactured using recycled SBR rubber
REGUPOL® 6010 17/8MMRegupol® 6010 17/8mm dimple is a soundproofing acoustic underlay manufactured from recycled SBR rubber, bound with polyurethane. The product is made to a specific density and finished in a 3D dimple profile. The finished product is technically superior when it comes solid T&G timber & plywood floors. The dimple profile allows for the impact sound generated to reduce and dissipate.
Benefits include:• German quality guaranteed• Minimises construction heights• Suitable for use with under floor heating• Protects expansion joints• PVC free• Made from recycled materials• Manufactured and certified to OHAS 18001:2007, DIN
ISO 9001:2008, DIN ISO 14001:2004 Management Systems
Product DataRolls 1.25m x 10mThickness 17mm Dimpled
Typical application under T&G and plywood timber system
REGUPOL® » T&G FLOORS
REPORT RG018 - REGUPOL® 6010 17/8MM
Layer of 19mm T&G Timber, bonded to 18mm Yellow Tongue, bonded to Regupol® 6010 17/8mm, to 170mm Concrete Slab.
Ln,w 53 dBImprovement∆Lw 27dB
IIC 55Indicative
Result Only
T&G Timber Normalized Impact Sound Pressure Levels - Indicative Result Only* Tested at CSIRO, sample was bonded together and fixed to the concrete slab. Sample size 1200mm x 1200mm.* Sample size was not full laboratory tested and is only indicative of result. Results can vary when different floors are installed and/or if bonded.
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150 Hz
Nor
mal
ized
Impa
ct S
ound
Pre
ssur
e Le
vel,
L'n,
dB
Bare Slab T&G Timber to 6010 17/8mm
30REGUPOL® » T&G FLOORS
Adhesive and Sealer Information
Regupol One Part Polyurethane Adhesive is an elastomeric moisture cured, solvent free polyurethane adhesive. The adhesive is suitable for internal and external wet and dry areas.
Regupol Two Part Water Based Epoxy Moisture Sealer is a high performance; water based two component epoxy moisture and vapour barrier formulated to prevent water seepage and permeation in building and construction substrates. Use when relative humidity exceeds the required levels.
with Regupol® 6010 17/8mm
This system reflects a typical residential application with approved T&G and overlay timber floors. For all other applications please contact Regupol’s Technical Division. Please note that drawings are not to scale and are for illustration purposes only.
Regupol One Part Polyurethane Adhesive
Regupol® 6010 17/8mm Acoustic Underlay
Approved T&G and Overlay Timber Flooring
7
6
5
1
19mm T&G Plywood or 2 Layers of 9mm Plywood3
Regupol One Part Polyurethane Adhesive4
Concrete Substrate Prepared to AS1884-2012
WALL SURFACE
SKIRTING
FLEXIBLE POLYURETHANE SEALANT COLOUR TO SUITWHEN INSTALLED IN A CLASS 2-9 BUILDING A SUITABLEFIRE RATED SEALANT MUST BE USED
19mm T&G PLYWOOD OR 2 LAYERS OF 9mmPLYWOOD AS DESCRIBED IN OUR SUGGESTED INSTALLATION GUIDELINES
REGUPOL ONE PART POLYURETHANE ADHESIVETO ADHERE TIMBER TO T&G PLYWOOD
SELECTED 19mm STRIP TIMBER FLOORING - OR 12mm THICK OVERLAY TIMBER FLOORING TROWEL GLUED TO PLYWOOD, AS PER MANUFACTURERS RECOMMENDATIONS
MINIMUM 2mmCLEARANCE
REGUPOL® 6010ISOLATION STRIP
CONCRETE SUBSTRATEPREPARED TO AS 1884-2012
REGUPOL ONE PART POLYURETHANE ADHESIVE TO ADHERE REGUPOL® 6010 TO SUBSTRATE
EXPANSION GAP MIN 10mm ORAS PER MANUFACTURERSRECOMMENDATIONS
REGUPOL® 6010 17/8mm THICK DIMPLED IMPACT SOUND ACOUSTIC UNDERLAY ADHERED TO SUBSTRATE,BUTT JOINED, CUT TO PERMIETER
10 - 19mm NOMINAL
1mm NOMINAL
19mm
1mm NOMINAL
17mm
REGUPOL ONE PART POLYURETHANE ADHESIVE TO ADHERE T&G PLYWOOD TO REGUPOL® UNDERLAY
Regupol One Part Polyurethane Adhesive2
T&G/OVERLAY TIMBERFLOORS OVER PLYWOOD
31
Regupol® is a global success story. Back in the early 1960’s, BSW GmbH had the ingenuity to manufacture recycled products from waste resources. The Regupol® brand represents the materials that make it; Recycled Gummi Rubber and Polyurethane.
The Regupol® brand is one of the world’s largest users of recycled rubber; reducing, recycling and re-using it in the manufacture of a broad range of rubber flooring and acoustic underlay products. To maintain our high level of product quality, we actively seek out sustainable manufacturers of rubber, PU foams, EPDM rubber, cork and other sustainable materials that make up our product ranges. No production waste is land filled – all off-cuts and remnants are re-cycled and re-used. Every production process and product is examined with regard to environmental capabilities, ensuring minimal or zero negative environmental impact.
GECA
Recycled materials and products, such as Regupol® can play such a major role in the design and construction of environmentally friendly and sustainable buildings. To ensure this, we have had many of the Regupol® Impact Sound Acoustic Underlays Good Environmental Choice Australia (GECA) certified for their environmental contribution.
The independent verification performed by GECA shows that the acoustic range of Regupol® recycled products are environmentally preferable and meet the requirements of GECA 25-2011 v2 - Floor Coverings Standard. Additionally, the GECA 25-2011 v2 Floor Coverings Standard is recognised by the Green Building Council of Australia (GBCA) under their Assessment Framework for Product Certification Schemes. The selected Regupol® products will provide a Level A sustainability factor weighting (100%) within the Green Star Sustainable Products Calculator.
Look for the Good Environmental Choice Australia tick to confirm if the product has been independently certified. For more information on GECA visit www.geca.org.au
NATSPEC
NATSPEC is a national not-for-profit organisation that is owned by the design, build, construct and property industry through professional associations and government property groups. NATSPEC’s objective is to improve the construction quality and productivity of the built environment through leadership of information. NATSPEC is the preferred specification system for major building professionals. Government departments, contractors, consultants and architects endorse NATSPEC.
Branded worksections are technical worksections developed by NATSPEC in conjunction with a manufacture known as a NATSPEC Product Partner. Each branded worksection is based on the associated NATSPEC generic worksection and shares the same classification number. It is a MS Word document Template which follows the NATSPEC style and can be customised. Regupol Australia are a NATSPEC Product Partner, offering a national specification for our acoustic floor underlays under the 0473 REGUPOL in acoustic floor underlays branded work section.
For more information on NATSPEC visit www.natspec.com.au
REGUPOL® AND THE ENVIRONMENT
REGUPOL® » ENVIRONMENT
REGUPOL AU 02.12018 Digital Version Jun 2018
DISCLAIMERInformation contained within this brochure is given in good faith as a suggested guide in specifying Regupol® Impact Sound Acoustic Underlays, no guarantee or warranty is expressed or implied. Any circumstances not covered by this guide should be referred to Regupol (Australia) Pty Limited or its Distributors for any particular attention required. No liability is accepted by Regupol (Australia) Pty Limited, our employees, distributors, representatives or agents, for any loss or damage, direct or indirect, that may result from using the information and/or suggestions as actual conditions for use that are beyond our control. All materials should be checked/tested for their suitability to the prevailing site conditions.
REGUPOL AUSTRALIA HEAD OFFICE & WAREHOUSE155 Smeaton Grange RoadSMEATON GRANGE NSW 2567Australia
Tel. +61 2 4624 0050Fax +61 2 4647 [email protected]
REGUPOL AUSTRALIA GOLD COAST WAREHOUSEUnit 3, 14 Hopper AvenueORMEAU QLD 4208Australia
Tel. 1800 418 909
Download or request additional information about the Regupol family of Vibration Isolation and Impact Sound Proofing products at www.regupol.com.au