ACQUA

106

Precise loss-wax casing body.

Robust wall recess housing in GFR polymer.

Choices of beam angle.

Safety tempered glass with post-cured silicone gasket.

Excellent heat dissipation design.

Anti-condensation wiring.

High qualitya LED from Philip Lumileds.

Corrosion proof stainless steel.

LED version up to 1885 lumen output.

Watertight connecting accessories.

ACQUA

A family of under water luminaires that are suitable to be installed in a concrete wall or mounted in ground or pool walls. Accessories include lens and water tight connecting devices. ACQUA is widely used to illuminate swimming pools, decorative pools, fountains and any submersible application. To avoid installation issues and add another level of safety, ACQUA is pre wired and tested in our factory and are fitted with our anti condensation device. To avoid over-heating of the luminaire body, ACQUA is Intended to be operated in a submersible state.

Installation work must be carried out under national safety regulations. Relamping and maintenance work must be done out of the water and in a dry location. The installation of the remote LED driver or transformer must be carried out with enough servicing space and be housed in accordance with local standards. Misused or self-modification without factory permission can lead to end of liability and guarantee. We highly recommend that the luminaire lay out should be considered during specifying and planning processes.

107

LED Constant Current Driver700mA 1-20W in IP67 GFR Polymer BoxOrdering code: 9-0506-01

IP68 watertight connecting deviceOrdering code: 9-0903-00

Electronic Transformer12V 35W-105Win IP67 GFR Polymer BoxOrdering code: 9-0503-01

IP68 water tight connection device for through wiringOrdering code : 9-0902-00

Softening LensOrdering code: for QR-CB51 lamp 9-0050-00for QT12 lamp 9-0055-00

Gel-Filled IP68 connector for through wiring.For cable diameter 6.5 – 12mm.Ordering code: 9-0904-00

Flat beam lens (for QT12 lamp)Ordering code : 9-0015-00

Gel-Filled IP68 connector.For cable diameter 8 – 10mm.Ordering code: 9-0905-00

Specification

• Fixtureismanufacturedincompliancewithinternationalstandard of general requirements IEC 60598-1, fixed general purpose luminaires IEC 60598-2-1 and luminaires for swimming pools IEC 60598-2-18. Electrical protection class3. Protection against dust and water IP68 at 3 meters. Protection against mechanical impact IK10 on body and IK06 on optical part. • SupremecorrosionproofUnderWatergradeStainlessSteel. Full body polish finished. Wall recessed housing made of GFR polymer. • Impactresistantsafetytemperedglasscover.Abletowithstandthe temperature up to 250°C. •Highperformanceanodizedspunaluminiumreflector. •MoldedPClensfromrenownedmanufacturersinvariouslight distribution patterns. • Post-curedtreatedsiliconegasket.Temperatureandweather resistant. Working temperature -40°C to +200°C. •Marinegrade316stainlesssteelscrew. •GU5.3/GY6.35lampholderinceramicbodyfromAAGStucchior equivalents.IMQ/ENECapproved. •B15dlampholderinceramicandzinc-coatedsteelfromVossloh Schwabeorequivalents.VDE/ENECapproved. •HighefficiencyLEDmoduleutilizedPhilipsLumiledchips.Assembled on MCPCB and mounted on to heat conductive material. • Pre-wiredwith2x1.5mm.H07RN-FneoprenecablefromAristoncavi or equivalents. IMQ approved. 100% in-line leakage check. • Installationworkhastobecarriedonaccordingtotheenclosed installation manual.

ACQUA

Product Image

Dimension

Light Distribution

ACQUA

Project Data

Project :

Location :

Date :

Note :

Product Name : ACQUA Wall Recess

Ordering Code : 7405-0-2-281-92

Lamp Type : QR-CB51 GU5.3 50W 12V 8200cd 10°

Protection : IP68 Class3

Specification

• Fixtureismanufacturedincompliancewithinternationalstandard ofgeneralrequirementsIEC60598-1,fixedgeneralpurpose luminairesIEC60598-2-1andluminairesforswimmingpoolsIEC 60598-2-18.Electricalprotectionclass3.Protectionagainstdustand waterIP68at3meters.ProtectionagainstmechanicalimpactIK10on bodyandIK06onopticalpart. • Bodyandcoverinsupremecorrosionproofunderwatergradestain lesssteel.Fullbodypolishfinished.Wallrecesshousingmadeof GFRpolymer.Suitableforsubmersingapplication. • Impactresistantsafetytemperedglasscover.Abletowithstandthe temperatureupto250°C. • Reflectorinhighpurityanodizedaluminium. • Post-curedtreatedmoldedsiliconegasket.Temperatureandweather resistant.Workingtemperature-40°Cto+200°C. • Externalscrewsinstainlesssteelwithsiliconegreasedipping. • CableentryprotectedbyIP68brassnickelcableglandfrom Lapp Kabel - Germany. • GU5.3lampholderinceramiccasewithnickelcontactfromVossloh Schwabe–Germany/ENECapproved. • Pre-wiredwith3meters2x1.5mm.H05RN-Funderwatercablefrom Aristoncavi–Italy.Anti-condensationwiringapplied.100%in-line leakage checking. • Tobeusedunderwateronly. • Remotetransformer/LEDdriveravailableseparately. • Installationworkhastobecarriedonaccordingtotheenclosed installationmanual.

Available Color

Black (replacethelast2digitsoforderingcodewith01)Graphite (replacethelast2digitsoforderingcodewith02)DarkGrey (replacethelast2digitsoforderingcodewith03)AluminiumSilver (replacethelast2digitsoforderingcodewith04)SmoothSilver (replacethelast2digitsoforderingcodewith05)White (replacethelast2digitsoforderingcodewith06)

ACQUAProduct name: ACQUA - Wall Recess

Ordering Code: 7405-0-2-911-92

Lamp Type: LED

Protection: IP68 Class III

Specification:

IEC Standard: IEC 60598-1 General Requirement

IEC 60598-2-18 Luminaires for Swimming Pools

IK Rating: Protection against mechanical impact IK10 on body and IK06 on optical part.

Luminaires Body Housing: Supreme corrosion proof Under Water grade Stainless Steel.

Full body polish finished.

Wall recessed housing made of GFR polymer.

N/A

Coating Process: N/A

Diffuser: Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.

N/A

Reflector: N/A

Lens: Molded PC lens from renowned manufacturers in various light distribution patterns.

Adjustable Optic: N/A

Gasket: Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.

External Screws: Marine grade 316 stainless steel screw.

Cable Entry: Cable entry protected by M20 cable gland. To be used with H05RN-F/ H07RN-F cable with 7-13mm. diameter.

Lamp Holder: N/A

Ballast: N/A

Capacitor: N/A

Ignitor: N/A

LED: High efficiency LED module utilized Philips Lumiled chips. Assembled on MCPCB and mounted on to heat conductive material.

Driver: Driver is not included and has to be ordered separately.

Internal Wire: N/A

Terminal Block/Connector: N/A

Pre-wired Cable: Pre-wired with 2x1.5mm. H07RN-F neoprene cable from Aristoncavi or equivalents. IMQ approved.

Caution: Installation work has to be carried on according to the enclosed installation manual.

The water drainage system must be tested to ensure that it is sufficiency and efficiency.

N/A

1170 lmN/A 12 W(700mA) 38° 3000 K

The whole systems tested to be operated under maximum ambient environment up to +40°C.

N/A

N/A

Product Image

Dimension

Light Distribution

Project Data

Project :

Location :

Date :

Note :

Product Name : ACQUA Wall Recess

Ordering Code : 7405-0-2-911-92

Lamp Type :

Protection :

ACQUAProduct name: ACQUA - Wall Recess

Ordering Code: 7405-0-2-910-92

Lamp Type: LED

Protection: IP68 Class III

Specification:

IEC Standard: IEC 60598-1 General Requirement

IEC 60598-2-18 Luminaires for Swimming Pools

IK Rating: Protection against mechanical impact IK10 on body and IK06 on optical part.

Luminaires Body Housing: Supreme corrosion proof Under Water grade Stainless Steel.

Full body polish finished.

Wall recessed housing made of GFR polymer.

N/A

Coating Process: N/A

Diffuser: Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.

N/A

Reflector: N/A

Lens: Molded PC lens from renowned manufacturers in various light distribution patterns.

Adjustable Optic: N/A

Gasket: Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.

External Screws: Marine grade 316 stainless steel screw.

Cable Entry: Cable entry protected by M20 cable gland. To be used with H05RN-F/ H07RN-F cable with 7-13mm. diameter.

Lamp Holder: N/A

Ballast: N/A

Capacitor: N/A

Ignitor: N/A

LED: High efficiency LED module utilized Philips Lumiled chips. Assembled on MCPCB and mounted on to heat conductive material.

Driver: Driver is not included and has to be ordered separately.

Internal Wire: N/A

Terminal Block/Connector: N/A

Pre-wired Cable: Pre-wired with 2x1.5mm. H07RN-F neoprene cable from Aristoncavi or equivalents. IMQ approved.

Caution: Installation work has to be carried on according to the enclosed installation manual.

The water drainage system must be tested to ensure that it is sufficiency and efficiency.

N/A

1170 lmN/A 12 W(700mA) 25° 3000 K

The whole systems tested to be operated under maximum ambient environment up to +40°C.

N/A

N/A

Product Image

Dimension

Light Distribution

Project Data

Project :

Location :

Date :

Note :

Product Name : ACQUA Wall Recess

Ordering Code : 7405-0-2-910-92

Lamp Type :

Protection :

ACQUAProduct name: ACQUA - Wall Recess

Ordering Code: 7405-0-2-909-92

Lamp Type: LED

Protection: IP68 Class III

Specification:

IEC Standard: IEC 60598-1 General Requirement

IEC 60598-2-18 Luminaires for Swimming Pools

IK Rating: Protection against mechanical impact IK10 on body and IK06 on optical part.

Luminaires Body Housing: Supreme corrosion proof Under Water grade Stainless Steel.

Full body polish finished.

Wall recessed housing made of GFR polymer.

N/A

Coating Process: N/A

Diffuser: Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.

N/A

Reflector: N/A

Lens: Molded PC lens from renowned manufacturers in various light distribution patterns.

Adjustable Optic: N/A

Gasket: Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.

External Screws: Marine grade 316 stainless steel screw.

Cable Entry: Cable entry protected by M20 cable gland. To be used with H05RN-F/ H07RN-F cable with 7-13mm. diameter.

Lamp Holder: N/A

Ballast: N/A

Capacitor: N/A

Ignitor: N/A

LED: High efficiency LED module utilized Philips Lumiled chips. Assembled on MCPCB and mounted on to heat conductive material.

Driver: Driver is not included and has to be ordered separately.

Internal Wire: N/A

Terminal Block/Connector: N/A

Pre-wired Cable: Pre-wired with 2x1.5mm. H07RN-F neoprene cable from Aristoncavi or equivalents. IMQ approved.

Caution: Installation work has to be carried on according to the enclosed installation manual.

The water drainage system must be tested to ensure that it is sufficiency and efficiency.

N/A

1170 lmN/A 12 W(700mA) 15° 3000 K

The whole systems tested to be operated under maximum ambient environment up to +40°C.

N/A

N/A

Product Image

Dimension

Light Distribution

Project Data

Project :

Location :

Date :

Note :

Product Name : ACQUA Wall Recess

Ordering Code : 7405-0-2-909-92

Lamp Type :

Protection :

ACQUAProduct name: ACQUA - Wall / Ground Mount

Ordering Code: 7406-0-2-911-92

Lamp Type: LED

Protection: IP68 Class III

Specification:

IEC Standard: IEC 60598-1 General Requirement

IEC 60598-2-18 Luminaires for Swimming Pools

IK Rating: Protection against mechanical impact IK10 on body and IK06 on optical part.

Luminaires Body Housing: Supreme corrosion proof Under Water grade Stainless Steel.

Full body polish finished.

N/A

N/A

Coating Process: N/A

Diffuser: Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.

N/A

Reflector: N/A

Lens: Molded PC lens from renowned manufacturers in various light distribution patterns.

Adjustable Optic: N/A

Gasket: Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.

External Screws: Marine grade 316 stainless steel screw.

Cable Entry: Cable entry protected by M20 cable gland. To be used with H05RN-F/ H07RN-F cable with 7-13mm. diameter.

Lamp Holder: N/A

Ballast: N/A

Capacitor: N/A

Ignitor: N/A

LED: High efficiency LED module utilized Philips Lumiled chips. Assembled on MCPCB and mounted on to heat conductive material.

Driver: Driver is not included and has to be ordered separately.

Internal Wire: N/A

Terminal Block/Connector: N/A

Pre-wired Cable: Pre-wired with 2x1.5mm. H07RN-F neoprene cable from Aristoncavi or equivalents. IMQ approved.

Caution: Installation work has to be carried on according to the enclosed installation manual.

The water drainage system must be tested to ensure that it is sufficiency and efficiency.

N/A

1170 lmN/A 12 W(700mA) 38° 3000 K

The whole systems tested to be operated under maximum ambient environment up to +40°C.

N/A

N/A

Product Image

Dimension

Light Distribution

Project Data

Project :

Location :

Date :

Note :

Product Name : ACQUA Wall / Ground Mount

Ordering Code : 7406-0-2-911-92

Lamp Type :

Protection :

ACQUAProduct name: ACQUA - Wall / Ground Mount

Ordering Code: 7406-0-2-910-92

Lamp Type: LED

Protection: IP68 Class III

Specification:

IEC Standard: IEC 60598-1 General Requirement

IEC 60598-2-18 Luminaires for Swimming Pools

IK Rating: Protection against mechanical impact IK10 on body and IK06 on optical part.

Luminaires Body Housing: Supreme corrosion proof Under Water grade Stainless Steel.

Full body polish finished.

N/A

N/A

Coating Process: N/A

Diffuser: Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.

N/A

Reflector: N/A

Lens: Molded PC lens from renowned manufacturers in various light distribution patterns.

Adjustable Optic: N/A

Gasket: Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.

External Screws: Marine grade 316 stainless steel screw.

Cable Entry: Cable entry protected by M20 cable gland. To be used with H05RN-F/ H07RN-F cable with 7-13mm. diameter.

Lamp Holder: N/A

Ballast: N/A

Capacitor: N/A

Ignitor: N/A

LED: High efficiency LED module utilized Philips Lumiled chips. Assembled on MCPCB and mounted on to heat conductive material.

Driver: Driver is not included and has to be ordered separately.

Internal Wire: N/A

Terminal Block/Connector: N/A

Pre-wired Cable: Pre-wired with 2x1.5mm. H07RN-F neoprene cable from Aristoncavi or equivalents. IMQ approved.

Caution: Installation work has to be carried on according to the enclosed installation manual.

The water drainage system must be tested to ensure that it is sufficiency and efficiency.

N/A

1170 lmN/A 12 W(700mA) 25° 3000 K

The whole systems tested to be operated under maximum ambient environment up to +40°C.

N/A

N/A

Product Image

Dimension

Light Distribution

Project Data

Project :

Location :

Date :

Note :

Product Name : ACQUA Wall / Ground Mount

Ordering Code : 7406-0-2-910-92

Lamp Type :

Protection :

ACQUAProduct name: ACQUA - Wall / Ground Mount

Ordering Code: 7406-0-2-909-92

Lamp Type: LED

Protection: IP68 Class III

Specification:

IEC Standard: IEC 60598-1 General Requirement

IEC 60598-2-18 Luminaires for Swimming Pools

IK Rating: Protection against mechanical impact IK10 on body and IK06 on optical part.

Luminaires Body Housing: Supreme corrosion proof Under Water grade Stainless Steel.

Full body polish finished.

N/A

N/A

Coating Process: N/A

Diffuser: Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.

N/A

Reflector: N/A

Lens: Molded PC lens from renowned manufacturers in various light distribution patterns.

Adjustable Optic: N/A

Gasket: Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.

External Screws: Marine grade 316 stainless steel screw.

Cable Entry: Cable entry protected by M20 cable gland. To be used with H05RN-F/ H07RN-F cable with 7-13mm. diameter.

Lamp Holder: N/A

Ballast: N/A

Capacitor: N/A

Ignitor: N/A

LED: High efficiency LED module utilized Philips Lumiled chips. Assembled on MCPCB and mounted on to heat conductive material.

Driver: Driver is not included and has to be ordered separately.

Internal Wire: N/A

Terminal Block/Connector: N/A

Pre-wired Cable: Pre-wired with 2x1.5mm. H07RN-F neoprene cable from Aristoncavi or equivalents. IMQ approved.

Caution: Installation work has to be carried on according to the enclosed installation manual.

The water drainage system must be tested to ensure that it is sufficiency and efficiency.

N/A

1170 lmN/A 12 W(700mA) 15° 3000 K

The whole systems tested to be operated under maximum ambient environment up to +40°C.

N/A

N/A

Product Image

Dimension

Light Distribution

Project Data

Project :

Location :

Date :

Note :

Product Name : ACQUA Wall / Ground Mount

Ordering Code : 7406-0-2-909-92

Lamp Type :

Protection :

Product Image

Dimension

Light Distribution

ACQUA

Project Data

Project :

Location :

Date :

Note :

Product Name : ACQUA Wall / Ground Mount

Ordering Code : 7406-0-2-281-92

Lamp Type : QR-CB51 GU5.3 50W 12V 8200cd 10°

Protection : IP68 Class3

Specification

• Fixtureismanufacturedincompliancewithinternationalstandard ofgeneralrequirementsIEC60598-1,fixedgeneralpurpose luminairesIEC60598-2-1andluminairesforswimmingpoolsIEC 60598-2-18.Electricalprotectionclass3.Protectionagainstdustand waterIP68at3meters.ProtectionagainstmechanicalimpactIK10on bodyandIK06onopticalpart. • Bodyandcoverinsupremecorrosionproofunderwatergradestain lesssteel.Fullbodypolishfinished.Wallrecesshousingmadeof GFRpolymer.Suitableforsubmersingapplication. • Impactresistantsafetytemperedglasscover.Abletowithstandthe temperatureupto250°C. • Reflectorinhighpurityanodizedaluminium. • Post-curedtreatedmoldedsiliconegasket.Temperatureandweather resistant.Workingtemperature-40°Cto+200°C. • Externalscrewsinstainlesssteelwithsiliconegreasedipping. • CableentryprotectedbyIP68brassnickelcableglandfrom Lapp Kabel - Germany. • GU5.3lampholderinceramiccasewithnickelcontactfromVossloh Schwabe–Germany/ENECapproved. • Pre-wiredwith3meters2x1.5mm.H05RN-Funderwatercablefrom Aristoncavi–Italy.Anti-condensationwiringapplied.100%in-line leakage checking. • Tobeusedunderwateronly. • Remotetransformeravailableseparately. • Installationworkhastobecarriedonaccordingtotheenclosed installationmanual.

Available Color

Black (replacethelast2digitsoforderingcodewith01)Graphite (replacethelast2digitsoforderingcodewith02)DarkGrey (replacethelast2digitsoforderingcodewith03)AluminiumSilver (replacethelast2digitsoforderingcodewith04)SmoothSilver (replacethelast2digitsoforderingcodewith05)White (replacethelast2digitsoforderingcodewith06)