ActionPointMaking IoT real in Manufacturing
Condition Based Monitoring, Analytics & Predictive Maintenance.
Monitoring, Reporting and Analysing critical facilities equipment with Microsoft Azure and Dell Edge intelligent gateways.
Copyright Action Point 2018
Copyright Action Point 2017
IoT-PREDICT: A plug-and-play, infinitely scalable, end-to-end, industrial grade machine monitoring solution
10-minute setup out of the box
An industrial-grade IoT solution
Smart manufacturing enabler
The challenges of smart manufacturing
Although there is much rhetoric about its benefits, the reality is
that existing IoT solutions have been incomplete and unsuited to
harsh industrial challenges.
Unrealized promises
A daunting challenge
Supporting the Business
Although organizations want to start using IoT solutions, it is a
new technology stack and many simply do not know how to get
started quickly.
Businesses already have massive investments in highly complex
systems. Minimizing disruption and impact on day to day
operations is critical.
10-minute setup out of the box
IoT-PREDICT comes with all the hardware,
software, sensors and instructions you
need so you can get up and running within
ten minutes of opening the box.
Capture sensor data on any form of industrial equipment and
see it immediately in Microsoft Azure or through customized
alerts.
Simply install the Dell Edge Gateway and sensors via the
industry standard fixings, configure settings and connect to
your Azure subscription: 10 minutes and you’re done.
Reduce the time and complexity associated with condition
monitoring—no need to spend time and resources on a on a
complex installation, proprietary software or specialized IT
work.
Quickly deploy across your entire operation as is, or can
contact ActionPoint for a solution customized to your
business needs.
An industrial-grade IoT solution
Get a solution that’s ready for your environment, complete
with industrial-grade vibration, current, and temperature
sensors.
Identify potential faults, avoid downtime and optimize
machine and equipment performance quickly and easily—
without having to modify existing systems.
Capture data directly from the shop floor using industrial
sensors connected to a rugged Dell Edge Gateway.
Establish a highly secure and fully-encrypted connection
between the factory floor and the Azure cloud using the Dell
Edge 3000 Gateway running Windows 10 IoT Enterprise.
IoT-PREDICT delivers an industrial-grade
solution to environments that have
previously been underserved by smart
condition monitoring and predictive
maintenance.
A smart manufacturing enabler
Embrace and adopt smart manufacturing in your business by
enabling predictive maintenance, advanced analytics,
business intelligence and machine learning.
Monitor your operations from anywhere, including checking
dashboards, running queries, and receiving alerts on your
desktop, tablet, or smartphone.
Scale to your particular needs, including creating a single
view of multiple plants and comparing performance (OEE)
across regions.
Connect to the sensors of your choice, suited to your unique
operational requirements; our solutions are built on the
industry 4-20mA standard.
IoT-PREDICT enables smart manufacturing
with an intelligent condition monitoring
and predictive maintenance solution.
Copyright © 2017 – Action Point Innovation Ltd.Copyright © 2017 – Action Point Innovation Ltd.
Dell
Edge Gateway
Temp
Vibration
Power
IoT-PREDICT
Sensors
Analytics and DashboardingAzure
Time Series Insights
Azure
IoT Hub
Copyright Action Point 2018
IoT-PREDICTCondition based Monitoring, Analytics
& Predictive Maintenance Solution
Copyright Action Point 2018
Time Series Insights – Advanced Analytics
IoT-PREDICT
Copyright Action Point 2018
Time Series Insights – Intuitive Dashboard Builder
IoT-PREDICT
Copyright © 2017 – Action Point Innovation Ltd.Copyright © 2017 – Action Point Innovation Ltd.
Dell
Edge Gateway
Temp
Vibration
Power
IoT-PREDICT
Sensors
Analytics and DashboardingAzure
Time Series Insights
Azure
Stream AnalyticseMail & SMS Alerting
Azure
IoT Hub
Copyright Action Point 2018
IoT-PREDICTCondition based Monitoring, Analytics
& Predictive Maintenance Solution
eMail & SMS Alerting
Copyright Action Point 2018
Alerts Dashboard
IoT-PREDICT
Copyright © 2017 – Action Point Innovation Ltd.Copyright © 2017 – Action Point Innovation Ltd.
Dell
Edge Gateway
Temp
Vibration
Power
IoT-PREDICT
Sensors
Analytics and DashboardingAzure
Time Series Insights
Azure Storage
Azure
Stream AnalyticseMail & SMS Alerting
Azure Machine Learning
Custom Integration
• Other Sensors
• SCADA (PLCs/Modbus etc.)
• BMS BACnet
• CANbus
Custom Integration
Azure
IoT Hub
Copyright Action Point 2018
Custom Integration
Custom Integration
Line of Business Applications
Dynamics, SAP, Salesforce etc.
Custom Integration
IoT-PREDICTCondition based Monitoring, Analytics
& Predictive Maintenance Solution
Highly scalable predictive maintenance
What we needed was a no-nonsense predictive
maintenance solution that would be easy and
straightforward to implement and that would
quickly demonstrate a return on investment for the
business. For an organization the size and breadth
of Molex, an industrial enterprise-grade highly
scalable solution was also an essential requirement
and IoT-PREDICT running on Microsoft Azure and
Dell ticks these boxes for us.”
— Michael Collins
Tool Room Supervisor, Molex Ireland
‟
Growth with ActionPoint and the Azure cloud
Manufacturing is a hugely important growth area
for Sigma IT and we see IoT-PREDICT as a strategic
enabler for every one of our manufacturing clients
to help us realise this growth. ActionPoint has very
successfully made the adoption of Azure IoT really
easy for both us and our customers. We believe the
combination of IoT-PREDICT, Dell, Azure IoT and
Sigma IT’s Professional Services is a winning
formula.”
— Mattias Zaunders
Sales Manager IoT, Sigma IT Consulting
‟
Show us the problem, we’ll show you the way.
You need an IoT partner who can offer you a true end to end solution, a partner with experience, a partner that understands the technology.
Action Point is that partner.
Contact Details: Ivan O’Connor, Head of IoT, [email protected] +353 86 0483462