SUPERIORPERFORMANCE
• High Activity• High Selectivity• Low Pressure Drop• Low Attrition
Hydrogenation • Dehydrogenation • Dehalogenation • Syngas to Alcohols • Specialty Processes
CONVERT FROM BATCH TOCONTINUOUS REACTORS • Higher Productivity• Higher Flexibility• Lower Operating Costs• Lower Capital Costs
ACTIVATED CARBON
MONOLITH (ACMC)
CATALYSTS
FOR CHEMICALPROCESS
INTENSIFICATION
CATALYST CARBON TYPE METALG/CF WT%
PROCESSPH RANGE
METAL LOADING
ACMC-Pd-115-101H Wood, #101 Pd 115 1.15 1 to 8
ACMC-Pd-80-101H Wood, #101 Pd 80 0.8 1 to 8
ACMC-Pt-40-101H Wood, #101 Pt 40 0.4 1 to 8
ACMC-Pd-80-108J5 Coconut, #108 Pd 80 0.7 1 to 8
ACMC-Rh-20-101H Wood, #101 Rh 20 0.2 1 to 8
ACMC-Ni-1500-101H Wood, #101 Ni 1500 15 1 to 8
ACMC-Fe-1000-101H Wood, #101 Fe 1000 10 1 to 8
ACMC-Cu-1000-101H Wood, #101 Cu 1000 10 1 to 8
GAC-Pd-120-109 Coconut, #109 Pd n.a. 1 9 and above
GAC-Pd-60-109 Coconut, #109 Pd n.a. 0.5 9 and above
ORGANICLIQUID
HYDROGEN
HEATER /CHILLER
CATA
LYST
PRODUCT
ACMC isrecommended for any process where carbon supported catalysts are used.
REACTOR LENGTH (FT)
01 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
10
20
30
40
50
60
70
80
90
100
CO
NVER
SIO
N (%
)
10% NITROBENZENE IN ISOPROPANOL
NITROBENZENE CONVERSION (60°C, 50 PSI)
SPACE VELOCITY (GHSV HR-1)
02000 4000 6000 8000 10000 12000 14000
2
4
6
8
10
12
14
16
18
DP/FT
(IN
CH
ES O
F W
ATE
R C
OLU
MN
)
GRANULAR ACTIVATED CARBON (4X8 MESH) ACM (400 CPSI)
Process example: Hydrogenation of 10% Nitrobenzene:
ACMC Monolith Catalysts have Low Pressure Dropcompared to Particulate Catalysts:
5555 Pleasantdale Road, Doraville, Georgia 30340 | Email: [email protected] | Office: 678-735-4945 | www.appliedcatalysts.com
MOBILE• Automotive• Commercial Transport• Marine• Small Engine• Diesel Engine
AIRPOLLUTIONABATEMENT
STATIONARY• Coal-Fired Power Plant• Industrial Manufacturing• Diesel & Gas Engine• Mining Equipment• CO2 Capture
