Home > Documents > Ad hoc Networking Security: Solving Node Selfishness Problem

Ad hoc Networking Security: Solving Node Selfishness Problem

Date post: 23-Feb-2016
Category:
Author: moana
View: 50 times
Download: 0 times
Share this document with a friend
Description:
Ad hoc Networking Security: Solving Node Selfishness Problem. Presented by : Ali N M Noman PhD Student CSI 5148 [email protected] Course Instructor: Professor Ivan Stojmenovic. Outline. Problem Definition & Security Challenges - PowerPoint PPT Presentation
Embed Size (px)
of 38 /38
Ad hoc Networking Security: Solving Node Selfishness Problem Presented by : Ali N M Noman PhD Student CSI 5148 [email protected] Course Instructor: Professor Ivan Stojmenovic
Transcript

Slide 1

Ad hoc Networking Security: Solving Node Selfishness ProblemPresented by : Ali N M Noman PhD Student CSI 5148 [email protected]

Course Instructor: Professor Ivan Stojmenovic

C 1OutlineProblem Definition & Security ChallengesBackground InformationBasic Cryptography- Encryption, Digital SignatureDSRAnalyzing SolutionsConclusion

Node Selfishness Problem:Selfishness problem:A form of misbehavior where a node does not participate in network operation in order to save its power.

12D3SScenario 1: Node S wants to send a packet(p) to Node D using the route , where Node 2 is a selfish node PPDid not forward PCan a selfish node do its own network operation?Node Selfishness ProblemSelfishness problem:A form of misbehavior where a node does not participate in network operation in order to save its power.

12D3SScenario 2: However Node 2 can send a packet (p1) using the routeP1P1Node Selfishness Problem: Security ChallengesIs it an active attack? No

However it degrades the network performance. 10 to 40% of misbehaving nodes cause 16 to 32% of degradation of the average throughput of the network.

Can traditional cryptographic solution (i.e. integrity, authentication) solve this problem?No

Background: Basic Security GoalsConfidentiality/secrecy: Encode(encrypt) M(plain text) into a unreadable text , C(cipher text) prior to transmission so that no one except bob and tom can decode(decrypt) it. Integrity: Tom can verify whether M was not modified in transmission or not. Authentication: Tom can verify that M was really sent by Bob.Non Repudiation: After sending the msg M, Bob cannot deny. Recall the purpose of our handwritten signature. (Digital Signature) (Digital Signature) is one of the main motivation behind developing public key cryptography

BobTomBob wants to send a msg, M to TomWired/wireless linkPublic Key Cryptography:RSAPublic key is known to all; private key is a secret. Encryption: Encrypt M with receivers public key. Here, C= (M)e_tom mod N

Decryption: Receiver (i.e. Tom) will decrypt it using its private key which is a secret to all. Here, M= (C)d_tom mod N [assuming C is not modified in transmission]

BobPublic key:(e_bob, N)Private Key: (d_bob, N)

Bob wants to send a msg, M to TomWired/wireless linkTomPublic key:(e_tom, N)Private Key: (d_tom, N)

Public Key Cryptography:RSADigital Signature : Sender(Bob) will encrypts(i.e. sign) the message, M with its private key and send (M | DS) to Tom. Here DS= (M)d_bob mod N

Signature Verification: Tom verifies Bobs signature as follows:If M== (DS)e_bob mod N correct signatureElse It is not signed by BobRemark: This solution ensures integrity and authentication and non repudiation but does not provide secrecy. How can you also include secrecy here??

BobPublic key:(e_bob, N)Private Key: (d_bob, N)Bob wants to send a msg, M to TomWired/wireless linkTomPublic key:(e_tom, N)Private Key: (d_tom, N)RSA: Computational ChallengesExample: assume C(encrypted text)= 542;Receiverd private key(d,n)=(157,2773)In this case, P= 542157 mod 2773 =805 hard for your calculator.But you can do that using this trick:

Question 1:Question : Alice has the public key {e = 13, n = 899} and the private key {d = 517, n =899}. Bob has the public key {e = 17, n = 851} and the private key {d = 233, n = 851}. Suppose Bob has received the plain/unencrypted message 67 and the signature 129. Describe how Bob verifies the signature . [ Note: In this case, message is directly used to calculate signature using RSA]

Solution: Here, M=67 and DS=129.

Step 1. Bob should decrypt the DS using Alices public keyM= (DS)13 mod 899=67 [use the trick given in the presentation]

Step 2. Now Bob will compare M with M . If they match then the signature is verified.

DSR: Dynamic Source Routing An on demand routing protocolEach data packet carries a complete path(i.e. ordered list of nodes towards destination)

12D3SDSR Example(simplified): S wants to send a packet ,P to DestinationS chooses a(best) route to D from its cache : . This route is added in packet header of P.452. (If everything goes well) the packet will traverse to D using the red pathDSR: Dynamic Source Routing12D3SDSR Example(simplified): Route Discovery (S to D)4Route Request : (S, D, request ID,RR=).Each intermediate node adds itself in the RR if it is not D or does not know a path to D D will send back the RR to S using a Route Reply. D can choose an already discovered path to S or can initiate another R. request to S if necessary . 2 main mechanisms: Route discovery: Discover (multiple) routes to D. Route maintenance : Updating route cache in nodes in order to ensure data transfer from S to D.5

RR=Route ReplyDSR: Dynamic Source Routing Route Maintenance:

Sending Route Error Massage to S: Intermediate Node informs S if link is broken

Packet Salvaging: Intermediate Node should forward packet to D using other path(if known) if the given path is broken.Solving Node Selfishness Problem Solutions can be categorized as:

Monitoring BasedWatchdogEnd-End Ack2H-ack

Reputation BasedCORECONFIDANTSigned Token

PreventiveNuglets (not feasible)Watchdog First proposal for mitigating routing misbehavior in MANET

Most of the later solutions rely on it.

2 components: Watchdog(monitoring) : Misbehavior(selfish) node detection Pathrater: choose a best path by avoiding a path with misbehaving(selfish) node.

Build on top of source routing protocol, DSR.

Watchdog Summary: Selfish Node detection. All nodes operates in promiscuous mode to monitor its neighbor nodes. If it finds that its neighbor node is misbehaving(selfish) for t (threshold) times, the node reports it to the source node.Watchdog : in selfish node detectionSelfish Node detection using Watchdog: Example(simplified) 12D3SPPDid not forward PNode 1 does not over hear forwarding of P from Node 2 Confirms it by checking t timesReports to S: Node 2 is selfishHow Pathrater works?Steps involved in finding the best path using pathrater (simpified) Initially a node gives a rate of 0.5 to all of its known nodes and a (fixed) rate of 1 to itself. Adds 0.01 to all nodes in the DSR packet forwarding path if it is successful Deduct -0.05 from all unreachable nodes of a DSR packet forwarding path (if it is unsuccessful due to broken link). Maximum rating of each node (except the initiator) is 0.8. A misbehavior node will get the rating of -100. Source Node, S will calculate the average rating of all nodes in each path and choose the path with maximum average rating.

Executing the entire Watchdog Algorithm Consider the following Scenario:1. Node S has the following rate for its known nodes:

2. Assume following events occur in order: E-1: packet forwarding to 3 using route is successful E-2: packet forwarding to 3 using route fails as link between 6 & 2 is broken (i.e. node 2 & node 3 is unreachable) E-3: Packet forwarding attempt using identifies Node 7 as a selfish nodeS12345671.00.550.50.50.60.50.50.5123S4567Executing the entire Watchdog AlgorithmQuestion 2:What is the updated node rating table of node S? Which one of the following 3 routes S will choose to send a packet to Node 3: Is it or or ?S12345671.00.550.50.50.60.50.50.5E-11.00.560.510.510.61E-21.00.460.46E-31.0-100Final1.00.560.460.460.610.50.5-100 Rating of = (1.0+0.5-100+0.46+0.46)/5 Rating of =(1.0+0.61+0.56+0.46+0.46)/5Rating of =(1.0+0.5+0.56+0.46+0.46)/5 has the highest rating. So it will be chosenWatchdog Algorithm: Pros & ConsSimple. Enhance the network performance. Weaknesses in Monitoring: collision, limited power transmission.

It does not give any penalty to a selfish node, instead it helps the selfish node to save its energy. How??What if A lies?? Reputation of A??20End-End Ack-How it works?Basis: Monitoring the reliability of routes by acknowledging in an end-end manners If S gets an ack (within the time out interval) from D after sending a packet, the route is fine. Otherwise not Successful delivery of a packet will increase the route rating and unsuccessful delivery decrease route ratingIf a routes goes under a threshold(not reliable any more) the route will not be used (may be for a specific time) Cross layer mechanism makes it possible to use TCP ack instead of implementing end end ack in network layer TCPNetwork TCPNetworkSDend-end ackEnd-End Ack-Pros & Cons Unreliable routes can be avoided. So routes having selfish node can also be avoided.

Cross layer mechanism makes it possible to use TCP ack instead of adding explicit ack in network layer .

Ack needs to be signed (specially in network layer ack implementation). In this case, end-end security association is required

Can it detect the selfish/misbehaving node? No ---This is the main drawback of this solution.

Signed token based Solution Collaborative localized monitoring.

Only Nodes with a valid token(signed collaboratively by its neighbors) can participate in network operation.

A misbehaving/selfish nodes token will be revoked by its neighbors.

RSA is used

Based on threshold secret sharing(polynomial secret sharing). Here private/secret key(sk) is shared among n nodes. Signing a token with private key , sk is same as if k(out of n) nodes sign the token with the part of sk it posses Signed token: How it works? 3 components: Collaborative monitoring, token renewal, token revocation. Token Renewal: K out of N neighbor nodes issue/renew a token for a node.

Signed token: How it works? contd Steps Involved(simplified):Upon detecting misbehavior of a neighbor ,a node broadcast a SID( single intrusion detection) to its neighbor.

Once a node received m (e.g. m=k) independent SID it broadcasts a GID(Global Intrusion Detection) to its neighbors.

When a node received K independent GID, it constructs a signed TREV(token revocation) packet and broadcasts it.

Upon receiving the signed TREV, a node checks its TREV table, if there is no entry for this node include it into the TREV table.

Any active link with a revoked node will be considered as broken

Signed token: Pros & Cons Localized solutions. Signature management is also done locally.

Self organized.

Very much suitable for a dense network; protect misbehavior in routing and packet forwarding.

A node with less than K neighbors cannot communicate. > Main Drawback

CONFIDANT A reputation based solution. Can be considered as an extension of DSR. Treats Misbehavior as an exception.4 components: Monitor, Reputation System, Trust Manager, Path Manager

1. Misbehavior detectedExceed the thresholdRate the selfish node considering others feedback also .Informs it to others as an alarmOther Nodes will do the same thing. However they will also consider informers trustworthinessIf the node rate is less than the threshold , avoid the path with misbehaving nodeExecuting CONFIDANT : (simplified example)

1. Route Request: A wants to send a packet to E2. Route Reply: D and E both know a path to E Route Cache of AemptyRoute Cache of A[A,B,E][A,C,D,E]Executing CONFIDANT : (simplified example)3 . Data Flow & Alarm: A sends data and receives alarm from C that D is misbehaving4. Act on Alarm: A chooses an alternative path to E

Route Cache of A[A,B,E][A,C,D,E]Route Cache of A[A,B,E]

UpdatedCONFIDANT: Pros & Cons Performance enhancement with some overhead.

Overhead(O): In this case additional alarm messages are transmitted along with all DSRs regular messages(i.e. Route Request, Route Reply and Route Error Message)

In the last execution of CONFIDANT, Overhead(O)=2/10=1/5=20% [ This is Question3]

Trust issue. Alarm msg needs to be signed

Conclusion Monitoring is the basis for most of the proposed solutions.

Where as Watchdog solution only avoids a route having misbehaving node , the reputation based solutions (e.g. CONFIDANT and Signed) also penalize the selfish/misbehaving node/

However most of the solutions have some limitations. End-End ack selfish node undetectedSigned Token Node needs at least K neighbors to performReferences:Yang, H.; Meng, X.; Lu, S. Self-organized network layer security in mobile ad hoc networks. ACM MOBICOM Wireless Security Workshop (WiSe 2002), Atlanta, GA,Sept 28, 2002.S. Buchegger and J.-Y. Le Boudec, Nodes Bearing Grudges: Towards Routing Security, Fairness,and Robustness in Mobile Ad Hoc Networks, in Proceedings of the 10th Euromicro Workshopon Parallel, Distributed and Network-based Processing. S. Buchegger and J.-Y. Le Boudec, Performance Analysis of the CONFIDANT Protocol, inProceedings of MobiHoc 2002. S. Marti, T. Giuli, K. Lai, and M. Baker, Mitigating Routing Misbehavior in Mobile Ad HocNetworks, in Proceedings of MOBICOM 2000. P. Michiardi and R. Molva, Core: A COllaborative REputation mechanism to Enforce Node Cooperation in Mobile Ad Hoc Networks, in Proceedings of IFIP Communication and MultimediaSecurity Conference 2002.Conti, M.; Gregori, E.; Maselli, G. Improving the performability of data transfer in mobile ad hoc networks. The 2nd IEEE International Conference on Sensor and Ad Hoc Communications and Networks (SECON 2005), Santa Clara, CA, Sept 2629, 2005.

Ad Hoc Network Security by Pietro Michiardi & Refik Molva

Thank You.

Questions??

34Appendix-1: RSA key pair generationSteps Involved:

Appendix2: Question 1 Digital SignatureDigital Signature (DS): DS is created by encrypting the message with senders private key. Receiver can verify it by decrypting DS with senders public key.

Question 1 : Alice has the public key {e = 13, n = 899} and the private key {d = 517, n =899}. Bob has the public key {e = 17, n = 851} and the private key {d = 233, n = 851}. Suppose Bob has received the plain/unencrypted message 67 and the signature 129. Describe how Bob verifies the signature. [ Note: In this case, message is directly used to calculate signature using RSA] Solution: Here, M=67 and DS=129. Step 1. Bob should decrypt the DS using Alices public keyM= (DS)13 mod 899=67 [use the trick discussed during presentation]Step 2. Now Bob will compare M with M. If they match then the signature is verified.Appendix3: Question 2 on Pathrater Question 2:What is the updated node rating table of node S? Which one of the following 3 routes S will choose to send a packet to Node 3: Is it or or ?S12345671.00.550.50.50.60.50.50.5E-11.00.560.510.510.61E-21.00.460.46E-31.0-100Final1.00.560.460.460.610.50.5-100 Rating of = (1.0+0.5-100+0.46+0.46)/5 Rating of =(1.0+0.61+0.56+0.46+0.46)/5Rating of =(1.0+0.5+0.56+0.46+0.46)/5

[ Follow Slide No 17-19 . The algorithm is given there] has the highest rating. So it will be chosenAppendix 4: Question 3 on CONFIDANT Communication Overhead in CONFIDANT: In this case additional alarm messages are transmitted along with all DSRs messages (i.e. Route Request, Route Reply and Error Message). It is calculated as follows: Question 3: Consider the following execution of the CONFIDANT Algorithm to calculate overhead(0).

Appendix 4: Question 3 on CONFIDANTSolution:

In this case Overhead(O) = 2/(6+4)=1/5= 20%


Recommended