Adams Industries Catalog 2012

8/3/2019 Adams Industries Catalog 2012

1/28

2012 Catalog


2/28

West Coast Office: (310) 472West Coast Office: (310) 472West Coast Office: (310) 472---301730173017www.AdamsIndustries.comwww.AdamsIndustries.comwww.AdamsIndustries.comEast Coast Office: (540) 815East Coast Office: (540) 815East Coast Office: (540) 815---142114211421

Hello Again!

As we start what will be our 18th year serving the military and law enforcement community, I cannottell you how pleased I am with the results from 2011 and I am impatient to once again knock it out othe part in 2012. Some of our recent accomplishments include:

1. Continued advances with our lines of Surface ANVIS Mounts and Ruggedized ANVIS Mounts.We have gone head-to-head with some very powerful (some would have said undefeatable) com-petitors on contracts this last year and we emerged victorious in most cases.

2. Development of our new SENTINEL goggle is completed and the initial response has been whydidnt anyone else build this? Yes, its that good. You can buy the SENTINEL kit to repair orupgrade your broken ANVIS or PVS-15s into ruggedized goggle with superior design features oryou can buy a whole goggle system including an option for gated unfilmed image intensifier

tubes and have the best goggles in the worldperiod.3. Our becoming a Distributor for CEJAY Engineering and spearheading the advertising and distri-

bution of the new HERO marking beacon and distraction device. Check this new product outASAP.

Any more and wed be bragging, so Ill stop there. As always we remain at the service of the war-fighter and law enforcement officer. Please never hesitate to contact us for information or help.

Best Regards,

Chris AdamsPresident, Adams Industries, Inc.


3/28


NEW PRODUCTS FOR 2012!

Check out the exciting new offerings from Adams Industries:1. We are now a Distributor for CEJAY Engineering (Pg. 4).

2. Check out the new HERO marking and distraction device(Pg. 5).

3. The new SENTINEL line of night vision goggles. Binocular in-

fantry goggles done RIGHT (Pg. 11).4. New A.I. helmet mount for the FLIR M24 (Pg. 25).

5. New FLIR T70 & T75 Thermal Weapon Sights (Pg. 27).


4/28


CEJAY ENGINEERING

Adams Industries is proud to announce that we have become a Distributor for the completeline of CEJAY Engineering beacons, markers, lights, etc. Please send us your request for anyCEJAY Engineering products and we will quickly get you pricing and delivery information.

CEJAY ENGINEERING


5/28


THE HEROHero is a versatile reusable distraction device and markingtool employing multi-directional bright light flashes and a

~130dB tone sound which can be seen and heard over consid-erable distance. It is compact, extremely rugged, and able towithstand deployment from low flying aircraft, moving vehi-cles, and unforgiving environments such as prison cells. De-signed in partnership with DEA officers to mark ground ob-jects of interest from airborne platforms, the Hero is deployedas part of our ongoing war against illegal drug trafficking.

When activated, the Hero first emits a constant sound andrapid light flashes for maximum affect. After sixty seconds,Hero begins emitting a single light flash per second and con-stant beeping sound for ease in location and recovery.

As a distraction device, the HERO is best deployed in smallenclosed areas to distract adversaries and provide the timeneeded to make successful entry. The HERO also works verywell as a training device and is much easier on participants

than flashbangs.The HERO housing is made of high strength nylon and willstand up to multiple deployments.

HERO DISTRACTION DEVICE/BEACON


6/28


AI/PVS-14The AI/PVS-14 is our version of the PVS-14 with superior tuperformance and superior warranties based on model. ThePVS-14 offers the latest state of the art capability in a packathat meets the rigorous demands of government users. It cbe head mounted, helmet mounted, camera mounted, weapmounted, and/or used as a hand held monocular.

The AI/PVS-14 is available in several models with both commercial and mil-spec tube options.

Export models also available. Contact us for details.

Ask for the Weapon Mount package by specifying -WM your requirement and youll receive the shuttered eyeguardand weapon mount. Request the Deployment Ready package by specifying -DR in your requirement and youll re-ceive everything needed for immediate deployment.

NIGHT VISION MONOCULARS


7/28


AI/PITBULLThe new Adams Industries Pitbull was designed for the U.S.

Army in response to the need for a smaller and lighter pockescope that is ruggedized and uses in-stock ANVIS-9 image intensifiers and optics but also accepts standard AN/PVS-14 accessories.

The Pitbull accomplished both these goals admirably and in-cludes upgrades to current systems such as using the 3V Liium battery (DOD Standard) for longer operating time andsmaller size and the ability to mount the PVS-7 IR illuminator

focusing lens for greater versatility of the IR illuminator.Law Enforcement Agenciesif you received surplus ANVIS-9and now don't know what to do with themwe can turn eachunit into TWO Pitbulls and you can use standard mounts.

The Pitbull is available to military and law enforcement custoers as a complete unit or as a build kit. We can also build yoPitbull using your MX10160 image intensifier and ANVIS opti

Pitbull models are available with commercial, mil-spec, and eportable image intensifiers.


8/28


BADGER

The new Adams Industries BADGER is a form & fitequivalent to the PVS-14 but is powered by two AA batteries for longer battery life.

The BADGER uses PVS-14 style optics and accepts allPVS-14 accessories, making it a natural for users accutomed to the PVS-14. Its three position switch includeoff, on, and on-IR functions and when the units IR illu-minator is functioning a red LED warning light shows

inside the field of view.The BADGER is perfect for government operators andgovernment contractors that need cost effective per-formance in a compact package and parts interchangeability with existing systems.


9/28


MONGOOSE

Until now obtaining inexpensive night vision meant buyequipment from Russia with suspect performance andquestionable product support. Now Adams Industriesbrings you the MONGOOSE, a low cost night vision prouct available in Gen. 2+ or Gen. 3, and not one part on aMONGOOSE comes from the Former Soviet Union.

The MONOGOOSE is a commercial product but it is stilbuilt to the same rugged specifications you expect from

every Adams Industries product. Contractors deployinwith the MONGOOSE can be assured that they are usinquality piece of night vision and police officers who usethe MONGOOSE in their duties know that they are gettinthe same performance normally found in much more expensive night vision products.

The MONGOOSE can be used with standard PVS-14 accsories making it easy to support from standard logistics

chains in the field.


10/28


M3NV

The M3NV is a compact, high performance, versatile night

sion system. In its standard configuration, the M3NV is a hheld night vision pocketscope with 27mm ocular and 27mmobjective lenses (providing 1 x system magnification). However, the user can select from among combinations of diffeent lenses and adapters to reconfigure the system to suit aparticular mission. The pocketscope is available with Genetion II, SuperGen, or Generation III image intensification. Tunique design provides an exceptional degree of flexibility

For example, the pocketscope can be used as a surveillancdevice, for low-level photography, or when attached to a hemount accessory, as a hands-free system for covert operations. It can also be converted into a night vision weaponsight. Unlike other pocketscopes, the housing design ofthe M3NV permits the use of simple adapters to couple thesystem to any refractive or catadioptric objective lens, of afocal length, that may be desirable for a particular applicat


11/28


NIGHT VISION GOGGLES

AI/SENTINELBrand new from Adams Industries!

The SENTINEL is a goggle project in response to the groundforces deployment of ANVIS goggles and the resulting combatbreakage of using a system designed for use in a cockpit inenvironments it was never intended for. In essence, the SEN-TINEL can be described as an up armored ANVIS system forground use. The SENTINEL is manufactured of SOLID ALUMI-NUM but still remains lighter than a PVS-15.

SENTINEL kits for redeployment of down systems include

configurations to repair and ruggedize ANVIS-6, ANVIS-9, andPVS-15 systems. The SENTINEL is available with field-swappable dovetail and ball-and-plunger mounting solutionsand is compatible with the AI-SAM series of ruggedizedmounts.

SENTINEL Systems are available with the choice of ANVIS orPVS-14 style optics and either automatic or manual gain con-trol.

The SENTINELfinally a night vision goggle rugged enoughfor the REAL WORLD.


12/28


AI/PVS-15Operators are unanimous in their appreciation of the

AI/PVS-15 night vision goggle. This rugged and lightweighttwin tube goggle offers increased spatial awareness forground operators usually only found in aviator systems.

The AI/PVS-15 series of goggles uses mil-spec optics andhousing for a light, ruggedized, and waterproof unit. Our sytems are even more potent due to our use of unfilmed L3 anITT PINNACLE Image intensifiers.

The AI/PVS-15 goggles provides all of the advantages of oth

PVS-15 system without the long wait for delivery or difficultjustify prices.

Systems are available in a variety of configurations to matcevery need. Specify FM for a face mask or HM for a helmmount.


13/28


Adams Industries goes beyond just selling pre-kitted ANVIS

systems like the other companies in this business. We go theextra mile in many ways:

Parts: A.I. stocks ANVIS parts and supports several of theaviation shops that service and certify ANVIS goggles.

Support: A.I. not only helps keeps ANVIS systems flying,but also supports re-tasked ANVIS systems. Ask about ourANVIS overhaul service for 1033 program goggles. We cantake that piece of junk your department got for free and

make it a valuable asset to your agency.

Manufacturing: A.I. manufactures the Rugged ANVIS Mountfor flight use and the Surface ANVIS Mount for ground use.We also make the only battery pack worth taking into groundoperationsthe Air/Ground Warrior Battery Pack.

ANVIS


14/28


Adams Industries is proud to introduce its series of helmet mounts fattaching ANVIS flight goggles to a variety of flight helmet systems.The RAM or Ruggedized ANVIS Mount. No aviation mount on the maket today can take the abuse the RAM can and that is of unquestioneimportance in a military environment.

The standard AI Ruggedized ANVIS Mount (AI/RAM) is the base for aour systems and features an all new manufacture ANVIS style mountwhich is properly spaced to hold the ANVIS style goggle in the appropriate position when mounted to most flight helmets. This mount wi

attach to most helmets using the standard four screw mountingmethod, and can be provided as a quick release as well.

Adams Industries helmet mounts do not interfere with headsets andcan be used with most helmet shields that are configured for ANVISuse. They are available in several configurations and can be orderedfit almost any helmet system. Simply put there is no other helmet

mount of this sort on the market that can be acquired as quickly and as cost effectively as thAdams Industries AI/RAM series of mounts.

RUGGED ANVIS MOUNT


15/28


Adams Industries is proud to introduce its series of helmet mounts f

attaching ANVIS-6, ANVIS-9, and F5050/PVS-23 night vision goggles most commonly available ballistic and non-ballistic protective helmeThe AI series of mounts provide a stable mounting platform for thenight vision unit without sacrificing the utility of the helmet.

The standard AI Surface ANVIS Mount (AI/SAM) is the base for all ousystems and features an all new manufacture ANVIS style mount whis properly spaced to hold the ANVIS style goggle in the appropriateposition when mounted to most military helmets. This mount will sn

into any standard US MIL headmount plate and will also work with thNOROTOS shroud mount.

Adams Industries helmet mounts do not interfere with headsets andcan be used with or without a helmet cover. They are available in seeral configurations and can be ordered to fit almost any helmet systeSimply put there is no other helmet mount of this sort on the marketthat can be acquired as quickly and as cost effectively as the AdamsIndustries AI/SAM series of mounts.

SURFACE ANVIS MOUNT


16/28


The face of warfare and the equipment used in it is an evechanging environment where something that worked perfectly in its original application is found wanting in anothCurrent ANVIS battery packs are not water resistant, notrugged, and do not accept 3V lithium batteries. In a worldwhere pilots and infantry soldiers are more commonly usANVIS and PVS-23 systems in adverse conditions both oflight helmets and ground helmets, a new battery pack waneeded; and here it is.

The Air Ground Warrior Battery Pack (AI/AGWBP) is wateresistant. It is rugged. It accepts BOTH AA and 3V Lithiubatteries. The AI/AGWBP is the answer to the problems fing pilots, special forces, infantry and other forces in thefield.

The AI/AGWBPReady for deployment in the mud, in therain, in the snow, IN THE REAL WORLD.

AI/AGWBP


17/28


AI/PVS-7The AI/PVS-7 is our version of the PVS-7D and is availablewith many tube options for both the domestic and export

markets. Built to withstand the rigors of battlefield usethe AI/PVS-7 will withstand water immersion, operatehands free, and includes an infrared LED for use in com-plete darkness and assist in reading maps. An LED warn-ing light is also built into the unit to remind the user thatthe infrared LED can be seen by others who are usingnight vision devices. A low battery warning light is builtinto the unit and there is a high light cutoff which will turn

the unit off if it is left on during daylight conditions. TheAI/PVS-7 runs on two AA batteries which power the unitfor more than 40 hours.

Ask for the Deployment Ready package by specifyingDR in your requirement and youll receive everythingneeded for immediate deployment.

We will help you identify the exact version of the AI/PVS-7

which is correct for your application, ask for details.


18/28


FLIR T90 T ANSThe MilSight T90 TaNS (Tactical Night Sight) is ahigh-resolution Clip-on Night Vision Device (CNVD) tha

mounts on any MIL-STD-1913 rail interface forward of aexisting scope, adding night vision capabilities to dayttarget acquisition platforms.

The TaNS utilizes a Gated Gen 3 image intensifier tubfast f/0.9 catadioptric lens for a brighter and sharper image in starlight, and patented permanent boresight aligment technology.

The unit is installed, operated, and removed without toThe TaNS features the proprietary and patent-appliedModular Utilitarian Power-Pack System (MUPPS), a detachable, field-replaceable battercompartment that accommodates either AA or CR123 batteries. Also standard on TaNS istemperature-compensated low-battery indicator that appears intermittently in the operatorfield of vision (when approximately 30 minutes of battery service remains) but does not ob-struct or otherwise interfere with the target image.

The TaNS is Optimized for close combat assault rifles such as the M4; M16; HK416; and AK

NIGHT VISION SIGHTS


19/28


FLIR T105 UNSThe MilSight T105 UNS (Universal Night Sight) AN/PVS-22 is a high-resolution Clip-on Night Vision Device (CNVD) that

mounts on any MIL-STD-1913 rail interface forward of an exist-ing scope, adding night vision capabilities to daytime targetacquisition platforms.

The UNS utilizes a full MIL-SPEC Gen 3 (autogated pinnacle)image intensifier tube, a fast f/1.15 catadioptric lens for abrighter and sharper image in starlight, and patented perma-nent boresight alignment technology.

The unit is installed, operated, and removed without tools andwithout affecting boresight (permanent boresight alignment).The unit can be mounted on a spotting scope for long range

reconnaissance, hand-held as a Night Observation Device (NOD), or used in other night-time opera-tions requiring night vision capabilities. Effective on all weapons and optimized for medium-rangesniper weapons, assault rifles and machine guns, the UNS includes FLIR's proprietary ShockMitigation System (SMS), allowing the unit to be used on weapons up to and including .50 cali-ber bolt-action rifles.


20/28


AN/PVS-24/M2124The PVS-24/M2124 is a rugged, clip-on night vision dev(CNVD) used by U.S. Special Operations Forces. The ad

vanced design of the M2124 eliminates the typical requiment of removing a primary (day) sighting system sincethe CNVD mounts in line with a standard day optical sigCombining day and night vision sights eliminates the nto re-zero, since the primary sight remains undisturbedAdditional advantages to supplementing a primary sighing system with the M2124 include maintaining a usersconsistent eye relief and shooting position as well as re

taining user muscle memory.

By operating the locking quick-disconnect, single-throwlever mounting system provided, the M2124 easily at-taches to a MIL-STD-1913 rail interface system. The unitmay also be used as a hand-held observation device anin conjunction with a spotting scope.


21/28


FLIR S135 MUNS

The MilSight S135 MUNS (Magnum Universal Night

Sight) AN/PVS-27 is a high-resolution clip-on night visionweapon sight that mounts on any MIL-STD-1913 rail inter-face forward of an existing scope, adding night vision capa-bilities to daytime target acquisition platforms.

The MUNS utilizes a an extremely fast f/1.0 catadioptriclens for a brighter and sharper image in starlight, and pat-ented permanent boresight alignment technology. TheMUNS gathers twice as much light as the AN/PVS-22 Uni-versal Night Sight (UNS) and can be used against tar-gets at 1.5 times the range of the UNS.

The unit is installed, operated, and removed without tools and without affecting boresight(permanent boresight alignment). The unit can be mounted on a spotting scope for long range re-connaissance, hand-held as a Night Observation Device (NOD), or used in other night-time opera-tions requiring night vision capabilities.

The MUNS is effective on all weapons up to .50 caliber equipped with an extended MIL-STD-1913

rail system and includes FLIR's proprietary Shock Mitigation System (SMS).


22/28


M2124-LRThe M2124-LR is the extended range version of the PV24/M2124 clip-on night vision device (CNVD) used by

U.S. Special Operations Forces. The advanced designthe M2124-LR eliminates the need to remove a primary(day) sighting system before switching to night operation. Combining day and night vision sights eliminatesthe need to re-zero, since the primary sight remains udisturbed. Additional advantages to supplementing a mary sighting system with the M2124-LR include maintaining a users consistent eye relief and shooting pos

tion as well as retaining user muscle memory.

By operating the locking quick-disconnect, single-throlever mounting system provided, the M2124-LR easilyattaches to a MIL-STD-1913 rail interface system. Theunit may also be used as a hand-held observation devand in conjunction with a spotting scope.


23/28


THERMAL VIEWERS

FLIR RECONThe FLIR RECON M18 is excellent for military and governmentuse. Its compact package offers a choice of high resolution

sensors (640x480 or 320x240) and accessories that make it aversatile performer.

Standard to the M18 is 2x and 4x digital zoom for long distanceobservation. For greater ranges there is an afocal extender lensoption to increase the range to detect. A standard 850nm30mW infrared laser (government only) is used to identify tar-gets to operators using night vision and the 0.5 mW modemakes the unit safe for training. There is a visible laser versionwhich is not restricted for distribution, and a no laser versionfor those who prefer to remain completely covert.

The M18 is a small rugged performer perfect for military andgovernment use.


24/28


THERMAL VIEWERS

FLIR RECON M18The FLIR RECON M18 is excellent for military and government uIts compact package offers a choice of high resolution sensors

(640x480 or 320x240) and accessories that make it a versatile peformer.

Standard to the M18 is 2x and 4x digital zoom for long distance servation. For greater ranges there is an afocal extender lens otion to increase the range to detect. A standard 850nm 30mW infrared laser (government only) is used to identify targets to opetors using night vision and the 0.5 mW mode makes the unit saffor training. There is a visible laser version which is not restricfor distribution, and a no laser version for those who prefer to remain completely covert.

The M18 is a small rugged performer perfect for military and government use.


25/28


FLIR RECON M24The FLIR RECON M24 is best described as a rough duty thermalpocketscope. This unit combines thermal performance with the

small size and ruggedness usually only found in military night vi-sion systems. The unit is easy to use and can be accessorizedto meet many mission requirements.

2x and 4x zoom as well an optional afocal extender make the M24capable of detecting targets at ranges not to be expected fromsuch a small package. When size and weight are important, theM24s performance is unmatched.

Finally, the M24 can operate in environments where most thermalimagers cannot. It is rated to MIL-STD-810E and waterproof to 66for 2 hours.

CHECK OUT OUR NEW HEAD/HELMET MOUNT ADAPTER FORTHE M24!


26/28


THERMAL SIGHTS

FLIR T50 ACTSThe ThermoSight T50 Advanced Combat ThermoSight (ACTS) isshort to medium range front mounted thermal imaging system de

signed to operate as a clip-on imager and as a rugged handheldunit as well.

The T50 was designed to work with the Trijicon Advanced CombaOptical Gunsight (ACOG) to present the soldier with the same fieof view and long range target acquisition while maintaining bore-sight. The unit works equally well with other day scopes as well.

Smart intuitive features are found on this unit such as a shuttered

eyeguard for surveillance use and large rugged single button controlsno complicated menus to navigate.

The system is rated IP68 and will operate in the most extreme conditions. Commercially availablCR123 batteries will power the unit for approximately nine hours of continuous use.

The FLIR T50 is a handsome package and a proven performer not found wanting in the mostdemanding of situations and the most challenging of conditions.


27/28


FLIR T70 & T75

Coming Q32012!

The T70 &T75 are a new line of thermal imager inline weapon sights with 640x480 resolution thatcan also be used as a rugged handheld imageras well. An optional laser pointer can be used toidentify targets to squad mates utilizing imageintensified optics.

Unlike previous in-line thermal weapon sights, the T70 &T75 can also be used as stand aloneweapon sights. In this role they make the total size/weight package smaller than other thermalweapon sights available until now.

Smart intuitive features are found on this unit such as a thumb operated mini-joystick to adjust andcontrol the sight while keeping hands on rails, grips, triggers, ammo, etc. ugged single buttoncontrolsno complicated menus to navigate.

The systems are rated IP67+ and will maintain integrity in 66 feet of seawater for up to two hours.

Commercially available CR123 batteries will power the unit for approximately six hours of continu-ous use. The FLIR T70 & T75 promise to be the most impressive thermal weapon sights of 2012.


28/28

FROM: Adams Industries, Inc.

P.O. Box 641413

Los Angeles, CA 90064

TO:

Date post:	06-Apr-2018
Category:	Documents
Upload:	solsys
View:	221 times
Download:	0 times

Adams Industries Catalog 2012

Documents