Gooseneck Task Lights and Accessories
2009 Littlite® LLC www.littlite.com [email protected]
ADD A RACK LIGHT WITHOUTUSING ANY RACK SPACE WITH
THE LITTLITE RAKIT MOUNTINGACCESSORY.
Gooseneck Task Lights and Accessories
2009 Littlite® LLC www.littlite.com [email protected]
Step One
Take one Littlite L-Series lampsetsuch as the L-3/18 illustratedhere.
Gooseneck Task Lights and Accessories
Step Two
Take one Littlite Rakit MountingAccessory.
2009 Littlite® LLC www.littlite.com [email protected]
Gooseneck Task Lights and Accessories
The mounting surface of the RAKITis offset from the mounting tabsenabling mounting the light on
either rack rail.
Left rack rail Right rack rail
RAKIT Features:
2009 Littlite® LLC www.littlite.com [email protected]
Gooseneck Task Lights and Accessories
The mounting surface of the Rakit isslightly raised to preventinterference with rack mountedequipment controls.
RAKIT Features:
2009 Littlite® LLC www.littlite.com [email protected]
Gooseneck Task Lights and Accessories
The RAKIT is designed to mountthe gooseneck orientation up or
down.
Gooseneck Up Gooseneck Down
RAKIT Features:
2009 Littlite® LLC www.littlite.com [email protected]
Gooseneck Task Lights and Accessories
Note the mounting holes on the RAKITand the bottom on the lampset.
2009 Littlite® LLC www.littlite.com [email protected]
Gooseneck Task Lights and Accessories
RAKIT Assembly Options:
Determine which rack rail you want to mount the light onand the orientation of the gooseneck. Line up theRACKIT mounting holes with the threaded mountingholes on the bottom of the lampset. Use the screws andwashers provided to secure the lampset to the RAKIT.
2009 Littlite® LLC www.littlite.com [email protected]
Gooseneck Task Lights and Accessories
If you need to remove thelight during transport, usethe Snap Mount providedwith the Littlite lampset tomount the light to the theRAKIT. Clean the surfacesof the lampset bottom andRAKIT, remove the backingfrom the Snap Mount andapply the Snap Mount toeach surface.
The strong quick releasematerial will hold the lightsecurely in place and enableyou to remove the lightwhen necessary.
RAKIT Assembly Options:
2009 Littlite® LLC www.littlite.com [email protected]
Gooseneck Task Lights and Accessories
RAKIT Assembly Options:
To mount the light assembly to the rack rail, you willneed to locate two mounting screws 3 rack spaces or4.71 inches apart. Remove these screws, position theRAKIT assembly and secure with the rack screws.
2009 Littlite® LLC www.littlite.com [email protected]
Gooseneck Task Lights and Accessories
RAKIT Assembly Options:
Connect the lampset powercord and you now have arack light without giving upany rack space.
If there is an unused 12-Volt BNC task lightconnector on a nearbydevice such as an audiomixer or power conditioner,you can use our BAaccessory cable to powerthe Littlite from thatconnector!
2009 Littlite® LLC www.littlite.com [email protected]
Gooseneck Task Lights and Accessories
www.littlite.com [email protected]
Questions or comments?
Contact us at:
(888) 548-8548
2009 Littlite® LLC