BC-104

©Copyright 2016 Dwyer Instruments, Inc. FR # 150002-08 Printed in U.S.A. 4/16

DWYER INSTRUMENTS, INC.P.O. Box 373Michigan City, IN 46360

Return Service Requested

VPS LOW PROFILE INDUCTIVE SENSOR• Rugged PBTP housing provides corrosion resistance and moisture protection • Easily and directly mounts to actuators with ISO-NAMUR topworks• Protected against vibration and shock with epoxy embedded solid state

components

MOUNTING KITS• Each kit is specially designed for the particular valve or actuator• Stainlesssteeldriveyokeandcouplingfitsecurelywithnoslippageorbinding• Nospecialalignmentfixturesareneededduetoswitchoffsetdesign

QUICK-VIEW®

• 360° visibility in a compact design• Backlighting option available for maximum visibility• Flame retardant and UV protected• Available with up to four switches

DT DETECTOR™

• Sensor consists of a hermetically sealed reed switch potted in a stainless steel housing and a separate stainless steel magnetic actuator bolt

• No moving parts, and can be mounted in any position• Designed to meet NEMA 1, 3, 4, 4X, 6, 7, 9 ,12 and 13• CSA and cULus listed for Class I, Groups A, B, C and D; Class II, Groups E, F

and G. Divisions 1 and 2

OPE N C LOS

SWITCHVISUALINDICATOR

DRIVE YOKE

MOUNTINGKIT

ADDITIONAL POSITION INDICATORS AND SENSORS

MARK SERIES POSITION INDICATORS/SWITCHES/TRANSMITTERS MARK SERIES POSITION INDICATORS/SWITCHES/TRANSMITTERS MARK SERIES MODEL CHART

HART® COMMUNICATIONS• HART® is available on Mark 1, 3, and 4 model indicators• 4 to 20 mA analog position transmitter with HART® communications• HART® features include: • Digital indication of position • 4 digital programmable position switches • Calibration of zero and span at the device from pushbuttons or through HART® master • Indication of sensor failure, programmable to 3.8 or 21 mA • Programmable dampening • Self test

FACTORY SEALED LEADS• Eliminatesthepossibilityofconduitcontaminationandtheneedforsealfittings• UL tested to 6000 psi (413 bar)• UL and CSA listed for Class I, Groups A, B, C and D; Class II, Groups E, F and G. Divisions 1 and 2.

Mark 1Polyester Coated Aluminum

Mark 1Stainless Steel

Construction 134

Mark 1, Magnetic CouplingMark 3, Multi-TurnMark 4, Thru-Shaft

Available Options “A” signifies available with corresponding construction style.Mark1 3 4

Output Type 123313235310320455152678991

1 Switch2 Switches1kΩPotentiometer1/2%.Availablewithswitches,seenotebelow.*1kΩPotentiometer1/4%.Availablewithswitches,seenotebelow.*2kΩPotentiometer.Availablewithswitches,seenotebelow.*5kΩPotentiometer.Availablewithswitches,seenotebelow.*10kΩPotentiometer.Availablewithswitches,seenotebelow.*20kΩPotentiometer.Availablewithswitches,seenotebelow.*4 SwitchesTransmitter1kΩPotentiometer1/2%.4to20mA.Availablewithswitches,seenotebelow.*Transmitter1kΩPotentiometer1/4%.Availablewithswitches,seenotebelow.*Transmitter2kΩPotentiometer.Availablewithswitches,seenotebelow.*6 Switches. Available with Switch Types B, C, I, R, V, W.AS-interface and 1 Switch. Available with Switch Types B, I, R, W.AS-interface and 2 Switches. Available with Switch Types B, I, R, W.Transmitter with HART®communication.Availablewithswitches,seenotebelow.*Transmitter with WirelessHART® communication. Not available with switches. (Contact factory)

AAAAAAAAAAA AAAAAA

--AAAAAAAAAAAAA------

AAAAAAAAAAAAAAAAA

Switch Type& Rating

A

BCDGHIMORSTV

W

SPDT Snap, Rated: 15 A @ 125/250/480 VAC (~) ; 1/8 hp @ 125 VAC (~), 1/4 hp @ 250 VAC (~), 1/2 A @ 125 VDC ( ), 1/4 A @ 250 VDC ( ).Inductive Sensor. 10 to 30 VDC ( ). Load: 0.1 A.SPDT High Temperature Snap, 350°F (176°C) for 600 hours, Rated:15.1 A @ 125/250/277 VAC (~).DPDT Snap, Rated: 10 A @ 125/250 VAC (~), 0.3 A @ 125 VDC ( ),0.15 A @ 250 VDC ( ).SPDT Gold Contact Snap, Rated: 1 A @ 125 VAC (~).SPDT Hermetically Sealed Snap, Rated: 1 A @ 125 VAC (~).NAMUR Inductive Sensor. 15 mA max @ 5-25 VDC ( ).SPDT Magnetic Blow-Out, Rated: 10 A @ 125 VAC (~)/VDC ( ), 1/4 hp @ 125 VAC (~)/VDC ( ).No SwitchesSPDT Hermetically Sealed Reed, Rated: 2 A @ 125 VAC (~), 2 A @ 24 VDC ( ).SPDT Snap, Rated: 4 A @ 125/250 VAC (~).SPDT High Temperature Snap, 250°F (121°C) Continuous, Rated: 5 A @ 125/250/480 VAC (~).SPDT Snap, Rated: 10 A @ 125/250 VAC (~), 1/3 hp @ 125/250 VAC (~), 1/2 A @ 125 VDC ( ), 1/4 A @ 250 VDC ( ), 4 A @ 125 VAC (~) (tungsten).SPDT Gold Contact Snap, Rated 0.1 A @ 125 VAC (~).

A

AAAAAAAAAAAA

A

A

--AAA----AA----AA

A

A

AAAAAAAAAAAA

ADriving Method

ADELM

A Direct or Yoke Drive without Visual Indicator.Direct Drive (or Yoke) with Visual Indicator.Direct or Yoke Drive with Visual Indicator, Single Window.Lever Drive (Shaft Projection) without Visual Indicator.Lever (Shaft Projection) with Visual Indicator.

AAAAA

AAAAA

AAAAA

Enclosure 012567 thru 20

Aluminum, Painted BlackAluminum, Painted White Epoxy with SS trimAluminum, Painted RedAluminum,Painted(colornotyetspecified)Cast 316 Stainless SteelAluminum,Painted(colornotyetspecified)

AAAAAA

AAAAAA

AAAAAA

Options C1C2FKMJ1J2SV1SV2MTB

B

ISIS

IE

IEIIIIEMIMLB

LBLBLBPPPTSTRSTW

Long Dwell Cam (not on Mark 3)Double Cam (not on Mark 3)FKM SealsJunctionPackagewithOne1/2˝NPTFemaleConduitConnectionandTerminalStrip.JunctionPackagewithTwo1/2˝NPTFemaleConduitConnectionandTerminalStrip.1 Attached Solenoid Valve (Must be ordered with J1 option).2 Attached Solenoid Valves (Must be ordered with J2 option).Metric Threaded Conduit Connection, M25 X 1.5 (M20 X 1.5 for optional J1 and J2 connections).Any Output Type except 91: Directive 2014/34/EU, KEMA 03ATEX2391 X, 0518 II 2G Ex db IIC T6 Gb(-25/-40/-50°C≤Tamb≤70°CandT5for-25°C/-40°C/-50°C≤Tamb≤80°C).Dependingonoutputswitch type selected.OutputType91:Directive2014/34/EU,KEMA03ATEX2391X,0518II2GExdbIICT4Gb(-40°C≤Tamb≤80°C).Any Output Type except 91: Directive 2014/34/EU, KEMA 03ATEX1392 X, 0518 II 1G Ex ia IIC T4 Ga.OutputType91:Directive2014/34/EU,KEMA03ATEX1392X,0518II1GExiaIICT4Gafor-40°C≤Tamb≤80°C.AnyOutputTypeexcept91:IECExDEK11.0056XExdbIICT6Gb(-25/-40/-50°C≤Tamb≤70°CandT5for-25/-40/-50°C≤Tamb≤80°C)optionalwordingdependingonoutputandswitchtypeselected.Output Type 91: IECEx DEK 11.0056X, Ex db IIC T4 Gb.Any Output Type except 91: IECEx DEK 11.0061X Ex ia IIC T4 Ga. Output Type 91: IECEx DEK 11.0061X Ex ia IIC T4 Ga.CertificateNCC13.02339X;Marking:ExdIICT6GborExdIICT5GbCertificate:NCC13.02338X;Marking:ExiaIICT4GaOutputType91withSuffixBDirective2014/34/EU,KEMA03ATEX2391X,0518II2GExdbIICT4Gb(-40°C≤Tamb≤80°C).Batterynotincluded.OutputType91withSuffixISDirective2014/34/EU,KEMA03ATEX1392X,0518II2GExiaIICT4Gafor-40°C≤Tamb≤80°C.Batterynotincluded.OutputType91withSuffixIEIECExDEK11.0056X,ExdbIICT4Gb.Batterynotincluded.OutputType91withSuffixIIIECExDEK11.0061XExiaIICT4Ga.Batterynotincluded.Plug J1, J2 PortsPaper TagStainless Steel Tag RivetedStainless Steel Tag Wired

AAAAAAAAA

A

AA

A

AAAAAA

AAAAAAA

----AAA----AA

--

A--

A

--AAAA--

------AAAA

AAAAAAAAA

A

AA

A

AAAAAA

AAAAAAA

*Note: Mark 1 and 4 potentiometer and transmitter outputs will have no switches when ordered with switch type O; 2 switches if ordered with switch types B, C, I, R, V, or W; and 4 switches if ordered with switch type S. Mark 3 potentiometer and transmitter outputs will have no switches when ordered with switch type O, and 2 switches if ordered with switch types A, D, G, M or T. WirelessHART® not available with switches.Example: 12VD0-J1. Mark 1, 2 Switches both Type V – SPDT, Direct Drive, Painted Aluminum Enclosure with Junction Package.Example: 15VD0. Mark 1, 2 Switches both Type V – SPDT, 4 to 20 mA transmitter, Direct Drive, Painted Aluminum Enclosure.

MARK 1 MAGNETIC COUPLING• Features a patented magnetic coupling that isolates the switch compartment, completely sealing the unit from the surrounding atmosphere for maximum hazard and leak protection• EZset cams on switch models provide simple set point adjustment• Flexible design allows multiple switches and transmitter options• Ideal for corrosive environments

MARK 4 THRU-SHAFT• Thru-Shaftdesignthatfeaturesa1˝bearingforlonglifeando-ringstosealtheswitch compartment for hazard, corrosion, and leak protection• EZset cams on switch models provide simple set point adjustment• Flexible design allows multiple switches and transmitter options• A more cost effective alternative to the Mark 1 Series for less demanding applications

WIRELESSHART® COMMUNICATIONS• WirelessHART® is available on Mark 1 and 4 model indicators• WirelessHART® allows for adjustment of settings without needing to remove the device from a hazardous environment• Wireless ability saves on installation costs associated with running conduit and wires

AS-INTERFACE• AS-Interface allows networking of up to 31 devices over a 2-wire network• Option for Mark 1 and 4 model indicators• Available with 1 or 2 incorporated solenoid valves

The Proximity Mark Series is a line of position indicators with a selection of various output options. Three model styles make up the Mark Series to cover almost any application.

• Weatherproof, explosion-proof and submersible options• Available with up to 6 switch outputs• Available with potentiometer and transmitter outputs• Adjustable visual indicator that displays OPEN/CLOSED status and degrees is standard on direct drive units

MARK 3 MULTI-TURN• Features a patented magnetic coupling that isolates the switch compartment, completely sealing the unit from the surrounding atmosphere for maximum hazard and leak protection• Multi-Turn models that can provide switch signals between 1 and 25 revolutions, and transmitter models for up to 10 revolutions without gear reduction• Flexible design allows multiple switches and transmitter options• Ideal for corrosive environments

MARK SERIES POSITION INDICATORS/SWITCHES/TRANSMITTERS MARK SERIES POSITION INDICATORS/SWITCHES/TRANSMITTERS MARK SERIES MODEL CHART

HART® COMMUNICATIONS• HART® is available on Mark 1, 3, and 4 model indicators• 4 to 20 mA analog position transmitter with HART® communications• HART® features include:

• Digital indication of position• 4 digital programmable position switches• Calibration of zero and span at the device from pushbuttons or through HART® master• Indication of sensor failure, programmable to 3.8 or 21 mA• Programmable dampening• Self test

FACTORY SEALED LEADS• Eliminatesthepossibilityofconduitcontaminationandtheneedforsealfittings• UL tested to 6000 psi (413 bar)• UL and CSA listed for Class I, Groups A, B, C and D; Class II, Groups E, F and G. Divisions

1 and 2.

Mark 1Polyester Coated Aluminum

Mark 1Stainless Steel

Construction 134

Mark 1, Magnetic CouplingMark 3, Multi-TurnMark 4, Thru-Shaft

Available Options “A” signifies available with corresponding construction style.Mark1 3 4

Output Type 123313235310320455152678991

1 Switch2 Switches1kΩPotentiometer1/2%.Availablewithswitches,seenotebelow.*1kΩPotentiometer1/4%.Availablewithswitches,seenotebelow.*2kΩPotentiometer.Availablewithswitches,seenotebelow.*5kΩPotentiometer.Availablewithswitches,seenotebelow.*10kΩPotentiometer.Availablewithswitches,seenotebelow.*20kΩPotentiometer.Availablewithswitches,seenotebelow.*4 SwitchesTransmitter1kΩPotentiometer1/2%.4to20mA.Availablewithswitches,seenotebelow.*Transmitter1kΩPotentiometer1/4%.Availablewithswitches,seenotebelow.*Transmitter2kΩPotentiometer.Availablewithswitches,seenotebelow.*6 Switches. Available with Switch Types B, C, I, R, V, W.AS-interface and 1 Switch. Available with Switch Types B, I, R, W.AS-interface and 2 Switches. Available with Switch Types B, I, R, W.Transmitter with HART®communication.Availablewithswitches,seenotebelow.*Transmitter with WirelessHART® communication. Not available with switches. (Contact factory)

AAAAAAAAAAA AAAAAA

--AAAAAAAAAAAAA------

AAAAAAAAAAAAAAAAA

Switch Type& Rating

A

BCDGHIMORSTV

W

SPDT Snap, Rated: 15 A @ 125/250/480 VAC (~) ; 1/8 hp @ 125 VAC (~), 1/4 hp @ 250 VAC (~), 1/2 A @ 125 VDC ( ), 1/4 A @ 250 VDC ( ).Inductive Sensor. 10 to 30 VDC ( ). Load: 0.1 A.SPDT High Temperature Snap, 350°F (176°C) for 600 hours, Rated:15.1 A @ 125/250/277 VAC (~).DPDT Snap, Rated: 10 A @ 125/250 VAC (~), 0.3 A @ 125 VDC ( ),0.15 A @ 250 VDC ( ).SPDT Gold Contact Snap, Rated: 1 A @ 125 VAC (~).SPDT Hermetically Sealed Snap, Rated: 1 A @ 125 VAC (~).NAMUR Inductive Sensor. 15 mA max @ 5-25 VDC ( ).SPDT Magnetic Blow-Out, Rated: 10 A @ 125 VAC (~)/VDC ( ), 1/4 hp @ 125 VAC (~)/VDC ( ).No SwitchesSPDT Hermetically Sealed Reed, Rated: 2 A @ 125 VAC (~), 2 A @ 24 VDC ( ).SPDT Snap, Rated: 4 A @ 125/250 VAC (~).SPDT High Temperature Snap, 250°F (121°C) Continuous, Rated: 5 A @ 125/250/480 VAC (~).SPDT Snap, Rated: 10 A @ 125/250 VAC (~), 1/3 hp @ 125/250 VAC (~), 1/2 A @ 125 VDC ( ), 1/4 A @ 250 VDC ( ), 4 A @ 125 VAC (~) (tungsten).SPDT Gold Contact Snap, Rated 0.1 A @ 125 VAC (~).

A

AAAAAAAAAAAA

A

A

--AAA----AA----AA

A

A

AAAAAAAAAAAA

ADriving Method

ADELM

A Direct or Yoke Drive without Visual Indicator.Direct Drive (or Yoke) with Visual Indicator.Direct or Yoke Drive with Visual Indicator, Single Window.Lever Drive (Shaft Projection) without Visual Indicator.Lever (Shaft Projection) with Visual Indicator.

AAAAA

AAAAA

AAAAA

Enclosure 012567 thru 20

Aluminum, Painted BlackAluminum, Painted White Epoxy with SS trimAluminum, Painted RedAluminum,Painted(colornotyetspecified)Cast 316 Stainless SteelAluminum,Painted(colornotyetspecified)

AAAAAA

AAAAAA

AAAAAA

Options C1C2FKMJ1J2SV1SV2MTB

B

ISIS

IE

IEIIIIEMIMLB

LBLBLBPPPTSTRSTW

Long Dwell Cam (not on Mark 3)Double Cam (not on Mark 3)FKM SealsJunctionPackagewithOne1/2˝NPTFemaleConduitConnectionandTerminalStrip.JunctionPackagewithTwo1/2˝NPTFemaleConduitConnectionandTerminalStrip.1 Attached Solenoid Valve (Must be ordered with J1 option).2 Attached Solenoid Valves (Must be ordered with J2 option).Metric Threaded Conduit Connection, M25 X 1.5 (M20 X 1.5 for optional J1 and J2 connections).Any Output Type except 91: Directive 2014/34/EU, KEMA 03ATEX2391 X, 0518 II 2G Ex db IIC T6 Gb(-25/-40/-50°C≤Tamb≤70°CandT5for-25°C/-40°C/-50°C≤Tamb≤80°C).Dependingonoutputswitch type selected.OutputType91:Directive2014/34/EU,KEMA03ATEX2391X,0518II2GExdbIICT4Gb(-40°C≤Tamb≤80°C).Any Output Type except 91: Directive 2014/34/EU, KEMA 03ATEX1392 X, 0518 II 1G Ex ia IIC T4 Ga.OutputType91:Directive2014/34/EU,KEMA03ATEX1392X,0518II1GExiaIICT4Gafor-40°C≤Tamb≤80°C.AnyOutputTypeexcept91:IECExDEK11.0056XExdbIICT6Gb(-25/-40/-50°C≤Tamb≤70°CandT5for-25/-40/-50°C≤Tamb≤80°C)optionalwordingdependingonoutputandswitchtypeselected.Output Type 91: IECEx DEK 11.0056X, Ex db IIC T4 Gb.Any Output Type except 91: IECEx DEK 11.0061X Ex ia IIC T4 Ga. Output Type 91: IECEx DEK 11.0061X Ex ia IIC T4 Ga.CertificateNCC13.02339X;Marking:ExdIICT6GborExdIICT5GbCertificate:NCC13.02338X;Marking:ExiaIICT4GaOutputType91withSuffixBDirective2014/34/EU,KEMA03ATEX2391X,0518II2GExdbIICT4Gb(-40°C≤Tamb≤80°C).Batterynotincluded.OutputType91withSuffixISDirective2014/34/EU,KEMA03ATEX1392X,0518II2GExiaIICT4Gafor-40°C≤Tamb≤80°C.Batterynotincluded.OutputType91withSuffixIEIECExDEK11.0056X,ExdbIICT4Gb.Batterynotincluded.OutputType91withSuffixIIIECExDEK11.0061XExiaIICT4Ga.Batterynotincluded.Plug J1, J2 PortsPaper TagStainless Steel Tag RivetedStainless Steel Tag Wired

AAAAAAAAA

A

AA

A

AAAAAA

AAAAAAA

----AAA----AA

--

A--

A

--AAAA--

------AAAA

AAAAAAAAA

A

AA

A

AAAAAA

AAAAAAA

*Note: Mark 1 and 4 potentiometer and transmitter outputs will have no switches when ordered with switch type O; 2 switches if ordered with switch types B, C, I, R, V, or W; and 4 switches if ordered with switch type S. Mark 3 potentiometer and transmitter outputs will have no switches when ordered with switch type O, and 2 switches if ordered with switch types A, D, G, M or T. WirelessHART® not available with switches.Example: 12VD0-J1. Mark 1, 2 Switches both Type V – SPDT, Direct Drive, Painted Aluminum Enclosure with Junction Package.Example: 15VD0. Mark 1, 2 Switches both Type V – SPDT, 4 to 20 mA transmitter, Direct Drive, Painted Aluminum Enclosure.

MARK 1 MAGNETIC COUPLING• Features a patented magnetic coupling that isolates the switch compartment, completely

sealing the unit from the surrounding atmosphere for maximum hazard and leak protection• EZset cams on switch models provide simple set point adjustment• Flexible design allows multiple switches and transmitter options• Ideal for corrosive environments

MARK 4 THRU-SHAFT• Thru-Shaftdesignthatfeaturesa1˝bearingforlonglifeando-ringstosealtheswitch

compartment for hazard, corrosion, and leak protection• EZset cams on switch models provide simple set point adjustment• Flexible design allows multiple switches and transmitter options• A more cost effective alternative to the Mark 1 Series for less demanding applications

WIRELESSHART® COMMUNICATIONS• WirelessHART® is available on Mark 1 and 4 model indicators• WirelessHART® allows for adjustment of settings without needing to remove the device

from a hazardous environment• Wireless ability saves on installation costs associated with running conduit and wires

AS-INTERFACE• AS-Interface allows networking of up to 31 devices over a 2-wire network• Option for Mark 1 and 4 model indicators• Available with 1 or 2 incorporated solenoid valves

The Proximity Mark Series is a line of position indicators with a selection of various output options. Three model styles make up the Mark Series to cover almost any application.

• Weatherproof, explosion-proof and submersible options• Available with up to 6 switch outputs• Available with potentiometer and transmitter outputs• Adjustable visual indicator that displays OPEN/CLOSED status and degrees is standard

on direct drive units

MARK 3 MULTI-TURN• Features a patented magnetic coupling that isolates the switch compartment, completely

sealing the unit from the surrounding atmosphere for maximum hazard and leak protection

• Multi-Turn models that can provide switch signals between 1 and 25 revolutions, and transmitter models for up to 10 revolutions without gear reduction

• Flexible design allows multiple switches and transmitter options• Ideal for corrosive environments

MARK SERIES POSITION INDICATORS/SWITCHES/TRANSMITTERS MARK SERIES POSITION INDICATORS/SWITCHES/TRANSMITTERS MARK SERIES MODEL CHART

HART® COMMUNICATIONS• HART® is available on Mark 1, 3, and 4 model indicators• 4 to 20 mA analog position transmitter with HART® communications• HART® features include:

• Digital indication of position• 4 digital programmable position switches• Calibration of zero and span at the device from pushbuttons or through HART® master• Indication of sensor failure, programmable to 3.8 or 21 mA• Programmable dampening• Self test

FACTORY SEALED LEADS• Eliminatesthepossibilityofconduitcontaminationandtheneedforsealfittings• UL tested to 6000 psi (413 bar)• UL and CSA listed for Class I, Groups A, B, C and D; Class II, Groups E, F and G. Divisions

1 and 2.

Mark 1Polyester Coated Aluminum

Mark 1Stainless Steel

Construction 134

Mark 1, Magnetic CouplingMark 3, Multi-TurnMark 4, Thru-Shaft

Available Options “A” signifies available with corresponding construction style.Mark1 3 4

Output Type 123313235310320455152678991

1 Switch2 Switches1kΩPotentiometer1/2%.Availablewithswitches,seenotebelow.*1kΩPotentiometer1/4%.Availablewithswitches,seenotebelow.*2kΩPotentiometer.Availablewithswitches,seenotebelow.*5kΩPotentiometer.Availablewithswitches,seenotebelow.*10kΩPotentiometer.Availablewithswitches,seenotebelow.*20kΩPotentiometer.Availablewithswitches,seenotebelow.*4 SwitchesTransmitter1kΩPotentiometer1/2%.4to20mA.Availablewithswitches,seenotebelow.*Transmitter1kΩPotentiometer1/4%.Availablewithswitches,seenotebelow.*Transmitter2kΩPotentiometer.Availablewithswitches,seenotebelow.*6 Switches. Available with Switch Types B, C, I, R, V, W.AS-interface and 1 Switch. Available with Switch Types B, I, R, W.AS-interface and 2 Switches. Available with Switch Types B, I, R, W.Transmitter with HART®communication.Availablewithswitches,seenotebelow.*Transmitter with WirelessHART® communication. Not available with switches. (Contact factory)

AAAAAAAAAAA AAAAAA

--AAAAAAAAAAAAA------

AAAAAAAAAAAAAAAAA

Switch Type& Rating

A

BCDGHIMORSTV

W

SPDT Snap, Rated: 15 A @ 125/250/480 VAC (~) ; 1/8 hp @ 125 VAC (~), 1/4 hp @ 250 VAC (~), 1/2 A @ 125 VDC ( ), 1/4 A @ 250 VDC ( ).Inductive Sensor. 10 to 30 VDC ( ). Load: 0.1 A.SPDT High Temperature Snap, 350°F (176°C) for 600 hours, Rated:15.1 A @ 125/250/277 VAC (~).DPDT Snap, Rated: 10 A @ 125/250 VAC (~), 0.3 A @ 125 VDC ( ),0.15 A @ 250 VDC ( ).SPDT Gold Contact Snap, Rated: 1 A @ 125 VAC (~).SPDT Hermetically Sealed Snap, Rated: 1 A @ 125 VAC (~).NAMUR Inductive Sensor. 15 mA max @ 5-25 VDC ( ).SPDT Magnetic Blow-Out, Rated: 10 A @ 125 VAC (~)/VDC ( ), 1/4 hp @ 125 VAC (~)/VDC ( ).No SwitchesSPDT Hermetically Sealed Reed, Rated: 2 A @ 125 VAC (~), 2 A @ 24 VDC ( ).SPDT Snap, Rated: 4 A @ 125/250 VAC (~).SPDT High Temperature Snap, 250°F (121°C) Continuous, Rated: 5 A @ 125/250/480 VAC (~).SPDT Snap, Rated: 10 A @ 125/250 VAC (~), 1/3 hp @ 125/250 VAC (~), 1/2 A @ 125 VDC ( ), 1/4 A @ 250 VDC ( ), 4 A @ 125 VAC (~) (tungsten).SPDT Gold Contact Snap, Rated 0.1 A @ 125 VAC (~).

A

AAAAAAAAAAAA

A

A

--AAA----AA----AA

A

A

AAAAAAAAAAAA

ADriving Method

ADELM

A Direct or Yoke Drive without Visual Indicator.Direct Drive (or Yoke) with Visual Indicator.Direct or Yoke Drive with Visual Indicator, Single Window.Lever Drive (Shaft Projection) without Visual Indicator.Lever (Shaft Projection) with Visual Indicator.

AAAAA

AAAAA

AAAAA

Enclosure 012567 thru 20

Aluminum, Painted BlackAluminum, Painted White Epoxy with SS trimAluminum, Painted RedAluminum,Painted(colornotyetspecified)Cast 316 Stainless SteelAluminum,Painted(colornotyetspecified)

AAAAAA

AAAAAA

AAAAAA

Options C1C2FKMJ1J2SV1SV2MTB

B

ISIS

IE

IEIIIIEMIMLB

LBLBLBPPPTSTRSTW

Long Dwell Cam (not on Mark 3)Double Cam (not on Mark 3)FKM SealsJunctionPackagewithOne1/2˝NPTFemaleConduitConnectionandTerminalStrip.JunctionPackagewithTwo1/2˝NPTFemaleConduitConnectionandTerminalStrip.1 Attached Solenoid Valve (Must be ordered with J1 option).2 Attached Solenoid Valves (Must be ordered with J2 option).Metric Threaded Conduit Connection, M25 X 1.5 (M20 X 1.5 for optional J1 and J2 connections).Any Output Type except 91: Directive 2014/34/EU, KEMA 03ATEX2391 X, 0518 II 2G Ex db IIC T6 Gb(-25/-40/-50°C≤Tamb≤70°CandT5for-25°C/-40°C/-50°C≤Tamb≤80°C).Dependingonoutputswitch type selected.OutputType91:Directive2014/34/EU,KEMA03ATEX2391X,0518II2GExdbIICT4Gb(-40°C≤Tamb≤80°C).Any Output Type except 91: Directive 2014/34/EU, KEMA 03ATEX1392 X, 0518 II 1G Ex ia IIC T4 Ga.OutputType91:Directive2014/34/EU,KEMA03ATEX1392X,0518II1GExiaIICT4Gafor-40°C≤Tamb≤80°C.AnyOutputTypeexcept91:IECExDEK11.0056XExdbIICT6Gb(-25/-40/-50°C≤Tamb≤70°CandT5for-25/-40/-50°C≤Tamb≤80°C)optionalwordingdependingonoutputandswitchtypeselected.Output Type 91: IECEx DEK 11.0056X, Ex db IIC T4 Gb.Any Output Type except 91: IECEx DEK 11.0061X Ex ia IIC T4 Ga. Output Type 91: IECEx DEK 11.0061X Ex ia IIC T4 Ga.CertificateNCC13.02339X;Marking:ExdIICT6GborExdIICT5GbCertificate:NCC13.02338X;Marking:ExiaIICT4GaOutputType91withSuffixBDirective2014/34/EU,KEMA03ATEX2391X,0518II2GExdbIICT4Gb(-40°C≤Tamb≤80°C).Batterynotincluded.OutputType91withSuffixISDirective2014/34/EU,KEMA03ATEX1392X,0518II2GExiaIICT4Gafor-40°C≤Tamb≤80°C.Batterynotincluded.OutputType91withSuffixIEIECExDEK11.0056X,ExdbIICT4Gb.Batterynotincluded.OutputType91withSuffixIIIECExDEK11.0061XExiaIICT4Ga.Batterynotincluded.Plug J1, J2 PortsPaper TagStainless Steel Tag RivetedStainless Steel Tag Wired

AAAAAAAAA

A

AA

A

AAAAAA

AAAAAAA

----AAA----AA

--

A--

A

--AAAA--

------AAAA

AAAAAAAAA

A

AA

A

AAAAAA

AAAAAAA

*Note: Mark 1 and 4 potentiometer and transmitter outputs will have no switches when ordered with switch type O; 2 switches if ordered with switch types B, C, I, R, V, or W; and 4 switches if ordered with switch type S. Mark 3 potentiometer and transmitter outputs will have no switches when ordered with switch type O, and 2 switches if ordered with switch types A, D, G, M or T. WirelessHART® not available with switches.Example: 12VD0-J1. Mark 1, 2 Switches both Type V – SPDT, Direct Drive, Painted Aluminum Enclosure with Junction Package.Example: 15VD0. Mark 1, 2 Switches both Type V – SPDT, 4 to 20 mA transmitter, Direct Drive, Painted Aluminum Enclosure.

MARK 1 MAGNETIC COUPLING• Features a patented magnetic coupling that isolates the switch compartment, completely

sealing the unit from the surrounding atmosphere for maximum hazard and leak protection• EZset cams on switch models provide simple set point adjustment• Flexible design allows multiple switches and transmitter options• Ideal for corrosive environments

MARK 4 THRU-SHAFT• Thru-Shaftdesignthatfeaturesa1˝bearingforlonglifeando-ringstosealtheswitch

compartment for hazard, corrosion, and leak protection• EZset cams on switch models provide simple set point adjustment• Flexible design allows multiple switches and transmitter options• A more cost effective alternative to the Mark 1 Series for less demanding applications

WIRELESSHART® COMMUNICATIONS• WirelessHART® is available on Mark 1 and 4 model indicators• WirelessHART® allows for adjustment of settings without needing to remove the device

from a hazardous environment• Wireless ability saves on installation costs associated with running conduit and wires

AS-INTERFACE• AS-Interface allows networking of up to 31 devices over a 2-wire network• Option for Mark 1 and 4 model indicators• Available with 1 or 2 incorporated solenoid valves

The Proximity Mark Series is a line of position indicators with a selection of various output options. Three model styles make up the Mark Series to cover almost any application.

• Weatherproof, explosion-proof and submersible options• Available with up to 6 switch outputs• Available with potentiometer and transmitter outputs• Adjustable visual indicator that displays OPEN/CLOSED status and degrees is standard

on direct drive units

MARK 3 MULTI-TURN• Features a patented magnetic coupling that isolates the switch compartment, completely

sealing the unit from the surrounding atmosphere for maximum hazard and leak protection

• Multi-Turn models that can provide switch signals between 1 and 25 revolutions, and transmitter models for up to 10 revolutions without gear reduction

• Flexible design allows multiple switches and transmitter options• Ideal for corrosive environments

BC-104

©Copyright 2016 Dwyer Instruments, Inc. FR # 150002-08 Printed in U.S.A. 4/16

DWYER INSTRUMENTS, INC.P.O. Box 373Michigan City, IN 46360

Return Service Requested

VPS LOW PROFILE INDUCTIVE SENSOR• Rugged PBTP housing provides corrosion resistance and moisture protection • Easily and directly mounts to actuators with ISO-NAMUR topworks• Protected against vibration and shock with epoxy embedded solid state

components

MOUNTING KITS• Each kit is specially designed for the particular valve or actuator• Stainlesssteeldriveyokeandcouplingfitsecurelywithnoslippageorbinding• Nospecialalignmentfixturesareneededduetoswitchoffsetdesign

QUICK-VIEW®

• 360° visibility in a compact design• Backlighting option available for maximum visibility• Flame retardant and UV protected• Available with up to four switches

DT DETECTOR™

• Sensor consists of a hermetically sealed reed switch potted in a stainless steel housing and a separate stainless steel magnetic actuator bolt

• No moving parts, and can be mounted in any position• Designed to meet NEMA 1, 3, 4, 4X, 6, 7, 9 ,12 and 13• CSA and cULus listed for Class I, Groups A, B, C and D; Class II, Groups E, F

and G. Divisions 1 and 2

OPE N C LOS

SWITCHVISUALINDICATOR

DRIVE YOKE

MOUNTINGKIT

ADDITIONAL POSITION INDICATORS AND SENSORS

BC-104

©Copyright 2016 Dwyer Instruments, Inc. FR # 150002-08 Printed in U.S.A. 4/16

DWYER INSTRUMENTS, INC.P.O. Box 373Michigan City, IN 46360

Return Service Requested

VPS LOW PROFILE INDUCTIVE SENSOR• Rugged PBTP housing provides corrosion resistance and moisture protection • Easily and directly mounts to actuators with ISO-NAMUR topworks• Protected against vibration and shock with epoxy embedded solid state

components

MOUNTING KITS• Each kit is specially designed for the particular valve or actuator• Stainlesssteeldriveyokeandcouplingfitsecurelywithnoslippageorbinding• Nospecialalignmentfixturesareneededduetoswitchoffsetdesign

QUICK-VIEW®

• 360° visibility in a compact design• Backlighting option available for maximum visibility• Flame retardant and UV protected• Available with up to four switches

DT DETECTOR™

• Sensor consists of a hermetically sealed reed switch potted in a stainless steel housing and a separate stainless steel magnetic actuator bolt

• No moving parts, and can be mounted in any position• Designed to meet NEMA 1, 3, 4, 4X, 6, 7, 9 ,12 and 13• CSA and cULus listed for Class I, Groups A, B, C and D; Class II, Groups E, F

and G. Divisions 1 and 2

OPE N C LOS

SWITCHVISUALINDICATOR

DRIVE YOKE

MOUNTINGKIT

ADDITIONAL POSITION INDICATORS AND SENSORS