Product/Process Change Notice - PCN 20_0123 Rev. - Analog Devices, Inc. Three Technology Way Norwood, Massachusetts 02062-9106
This notice is to inform you of a change that will be made to certain ADI products (see Appendix A) that you may have purchased in thelast 2 years. Any inquiries or requests with this PCN (additional data or samples) must be sent to ADI within 30 days ofpublication date. ADI contact information is listed below.
PCN Title: Micro-Module, Test Site Transfer from Analog Devices Singapore to Analog DevicesPenang, Malaysia
Publication Date: 28-Feb-2020Effectivity Date: 01-Jun-2020 (the earliest date that a customer could expect to receive changed material)
Revision Description:Initial Release
Description Of Change:Micro-Module, Test Site Transfer from Analog Devices Singapore to Analog Devices Penang, Malaysia.
Reason For Change:Micro-Module devices are currently production tested at the Analog Devices Singapore (ADSG). The Analog Devices Singapore facility will beclosed in calendar Q2,2021. It was a strategic decision from business standpoint to qualify Analog Devices Penang, Malaysia (ADPG) as atest site for micro-Module devices. After qualification and replication of necessary test capability, ADPG will serve as the primary test sitefacility to serve future demands. ADPG will use the same tester platform, test programs, monitors, and controls.
Impact of the change (positive or negative) on fit, form, function & reliability:There will be no impact on fit, form, function and reliability of the product.
Product Identification (this section will describe how to identify the changed material)Tested materials in Analog Devices Penang, Malaysia will carry the same catalog part, marking and branding. Traceability to test site ismaintained through lot number marking.
Summary of Supporting Information:Test correlation and validation has been performed per ADI's standard product site to site and/or platform change correlation procedure. Seeattached Qualification Report.
Supporting DocumentsAttachment 1: Type: Qualification Results SummaryADI_PCN_20_0123_Rev_-_uModuleTest Qualification Report 2-24.pdf
Attachment 2: Type: Test Correlation ReportADI_PCN_20_0123_Rev_-_Correlation Reports for uModules.xlsx
Attachment 3: Type: OtherADI_PCN_20_0123_Rev_-_GRnR_LTM4620A_LTM4622_LTM4644_LTM8008.xlsx
For questions on this PCN, please send an email to the regional contacts below or contact your local ADI sales representatives.
Americas:[email protected]
Europe:[email protected]
Japan:[email protected]
Rest of Asia:[email protected]
Analog Devices, Inc. PCN 20_0123_Rev_- Page 1 of 5
Appendix A - Affected ADI Models
Added Parts On This Revision - Product Family / Model Number (721)LTC2979 / LTC2979CY#PBF LTC2979 / LTC2979IY#3NUPBF LTC2979 / LTC2979IY#PBF LTC2980 / LTC2980BIY#PBF LTC2980 / LTC2980CY#PBF
LTC2980 / LTC2980IY#PBF LTC3376 / LTC3376EY#PBF LTC3376 / LTC3376IY#PBF LTC7130 / LTC7130EY#PBF LTC7130 / LTC7130IY#3ZZPBF
LTC7130 / LTC7130IY#PBF LTC7150S / LTC7150SEY#PBF LTC7150S / LTC7150SIY#3ZZPBF LTC7150S / LTC7150SIY#PBF LTC7150S / LTC7150SJY-4#PBF
LTC7150S / LTC7150SJY-4#WPBF LTM2810 / LTM2810CY-I#PBF LTM2810 / LTM2810CY-S#PBF LTM2810 / LTM2810HY-I#PBF LTM2810 / LTM2810HY-S#PBF
LTM2810 / LTM2810IY-I#PBF LTM2810 / LTM2810IY-S#PBF LTM2881 / LTM2881CV-3#PBF LTM2881 / LTM2881CV-5#PBF LTM2881 / LTM2881CY-3#PBF
LTM2881 / LTM2881CY-5#PBF LTM2881 / LTM2881HV-3#PBF LTM2881 / LTM2881HV-5#PBF LTM2881 / LTM2881HY-3 LTM2881 / LTM2881HY-3#PBF
LTM2881 / LTM2881HY-5 LTM2881 / LTM2881HY-5#PBF LTM2881 / LTM2881IV-3#PBF LTM2881 / LTM2881IV-5#PBF LTM2881 / LTM2881IY-3
LTM2881 / LTM2881IY-3#PBF LTM2881 / LTM2881IY-5 LTM2881 / LTM2881IY-5#PBF LTM2881 / LTM2881MPY-3 LTM2881 / LTM2881MPY-3#PBF
LTM2881 / LTM2881MPY-5 LTM2881 / LTM2881MPY-5#PBF LTM2882 / LTM2882CV-3#PBF LTM2882 / LTM2882CV-5#PBF LTM2882 / LTM2882CY-3#PBF
LTM2882 / LTM2882CY-5#PBF LTM2882 / LTM2882HY-3#PBF LTM2882 / LTM2882HY-5#PBF LTM2882 / LTM2882IV-3#PBF LTM2882 / LTM2882IV-5#PBF
LTM2882 / LTM2882IY-3 LTM2882 / LTM2882IY-3#PBF LTM2882 / LTM2882IY-5#PBF LTM2883 / LTM2883CY-3I#PBF LTM2883 / LTM2883CY-3S#PBF
LTM2883 / LTM2883CY-5I#PBF LTM2883 / LTM2883CY-5S#PBF LTM2883 / LTM2883HY-3I#PBF LTM2883 / LTM2883HY-3S#PBF LTM2883 / LTM2883HY-5I#PBF
LTM2883 / LTM2883HY-5S#PBF LTM2883 / LTM2883IY-3I#PBF LTM2883 / LTM2883IY-3S#PBF LTM2883 / LTM2883IY-5I#PBF LTM2883 / LTM2883IY-5S#PBF
LTM2884 / LTM2884CY#PBF LTM2884 / LTM2884HY#PBF LTM2884 / LTM2884IY#PBF LTM2885 / LTM2885CY#PBF LTM2885 / LTM2885HY#PBF
LTM2885 / LTM2885IY#PBF LTM2886 / LTM2886CY-3I#PBF LTM2886 / LTM2886CY-3S#PBF LTM2886 / LTM2886CY-5I#PBF LTM2886 / LTM2886CY-5S#PBF
LTM2886 / LTM2886HY-3I#PBF LTM2886 / LTM2886HY-3S#PBF LTM2886 / LTM2886HY-5I#PBF LTM2886 / LTM2886HY-5S#PBF LTM2886 / LTM2886IY-3I#PBF
LTM2886 / LTM2886IY-3S#PBF LTM2886 / LTM2886IY-5I#PBF LTM2886 / LTM2886IY-5S#PBF LTM2887 / LTM2887CY-3I#PBF LTM2887 / LTM2887CY-3S#PBF
LTM2887 / LTM2887CY-5I#PBF LTM2887 / LTM2887CY-5S#PBF LTM2887 / LTM2887HY-3I#PBF LTM2887 / LTM2887HY-3S#PBF LTM2887 / LTM2887HY-5I#PBF
LTM2887 / LTM2887HY-5S#PBF LTM2887 / LTM2887IY-3I#PBF LTM2887 / LTM2887IY-3S#PBF LTM2887 / LTM2887IY-5I#PBF LTM2887 / LTM2887IY-5S#PBF
LTM2889 / LTM2889CY-3#PBF LTM2889 / LTM2889CY-5#PBF LTM2889 / LTM2889HY-3#PBF LTM2889 / LTM2889HY-5#PBF LTM2889 / LTM2889IY-3#PBF
LTM2889 / LTM2889IY-5#PBF LTM2892 / LTM2892CY-I#PBF LTM2892 / LTM2892CY-S#PBF LTM2892 / LTM2892HY-I#PBF LTM2892 / LTM2892HY-S#PBF
LTM2892 / LTM2892IY-I#PBF LTM2892 / LTM2892IY-S#PBF LTM2893 / LTM2893CY#PBF LTM2893 / LTM2893CY-1#PBF LTM2893 / LTM2893HY#PBF
LTM2893 / LTM2893HY-1#PBF LTM2893 / LTM2893IY#PBF LTM2893 / LTM2893IY-1#PBF LTM2894 / LTM2894CY#PBF LTM2894 / LTM2894HY#PBF
LTM2894 / LTM2894IY#PBF LTM2895 / LTM2895CY#PBF LTM2895 / LTM2895HY#PBF LTM2895 / LTM2895IY#PBF LTM2987 / LTM2987BIY#PBF
LTM2987 / LTM2987CY#PBF LTM2987 / LTM2987IY#PBF LTM4600 / LTM4600EV#PBF LTM4600 / LTM4600IV#2DHPBF LTM4600 / LTM4600IV#PBF
LTM4600HV / LTM4600HVEV#PBF LTM4600HV / LTM4600HVIV#PBF LTM4600HV / LTM4600HVMPV#PBF LTM4601 / LTM4601EV#PBF LTM4601 / LTM4601EV-1#PBF
LTM4601 / LTM4601EY#PBF LTM4601 / LTM4601EY-1#PBF LTM4601 / LTM4601IV#PBF LTM4601 / LTM4601IV-1#PBF LTM4601 / LTM4601IY
LTM4601 / LTM4601IY#PBF LTM4601 / LTM4601IY-1 LTM4601 / LTM4601IY-1#PBF LTM4601A / LTM4601AEV#PBF LTM4601A / LTM4601AEV-1#PBF
LTM4601A / LTM4601AEY#PBF LTM4601A / LTM4601AEY-1#PBF LTM4601A / LTM4601AIV#PBF LTM4601A / LTM4601AIV-1#PBF LTM4601A / LTM4601AIY
LTM4601A / LTM4601AIY#PBF LTM4601A / LTM4601AIY-1 LTM4601A / LTM4601AIY-1#PBF LTM4601A / LTM4601AYDCM#PBF LTM4601AHV / LTM4601AHVEV#PBF
LTM4601AHV / LTM4601AHVEY#PBF LTM4601AHV / LTM4601AHVIV#2DWPBF LTM4601AHV / LTM4601AHVIV#PBF LTM4601AHV / LTM4601AHVIY LTM4601AHV / LTM4601AHVIY#PBF
LTM4601AHV / LTM4601AHVMPV#PBF LTM4601AHV / LTM4601AHVMPY LTM4601AHV / LTM4601AHVMPY#PBF LTM4601HV / LTM4601HVEV#PBF LTM4601HV / LTM4601HVEY#PBF
LTM4601HV / LTM4601HVIV#PBF LTM4601HV / LTM4601HVIY#PBF LTM4602 / LTM4602EV#PBF LTM4602 / LTM4602IV#PBF LTM4602HV / LTM4602HVEV#PBF
LTM4602HV / LTM4602HVIV#PBF LTM4603 / LTM4603EV#PBF LTM4603 / LTM4603EV-1#PBF LTM4603 / LTM4603IV#PBF LTM4603 / LTM4603IV-1#PBF
LTM4603HV / LTM4603HVEV#PBF LTM4603HV / LTM4603HVIV#PBF LTM4604 / LTM4604EV#PBF LTM4604 / LTM4604IV#PBF LTM4604A / LTM4604AEV#2HFPBF
LTM4604A / LTM4604AEV#PBF LTM4604A / LTM4604AEY#PBF LTM4604A / LTM4604AIV#PBF LTM4604A / LTM4604AIY LTM4604A / LTM4604AIY#PBF
LTM4605 / LTM4605EV#3CNPBF LTM4605 / LTM4605EV#PBF LTM4605 / LTM4605IV#PBF LTM4606 / LTM4606EV#PBF LTM4606 / LTM4606EY#PBF
LTM4606 / LTM4606IV#PBF LTM4606 / LTM4606IY LTM4606 / LTM4606IY#PBF LTM4606 / LTM4606MPV#PBF LTM4606 / LTM4606MPY
LTM4606 / LTM4606MPY#PBF LTM4607 / LTM4607EV#1ABPBF LTM4607 / LTM4607EV#PBF LTM4607 / LTM4607IV#PBF LTM4608 / LTM4608EV#3DWPBF
LTM4608 / LTM4608EV#PBF LTM4608 / LTM4608IV#PBF LTM4608A / LTM4608AEV#PBF LTM4608A / LTM4608AEY#PBF LTM4608A / LTM4608AIV#PBF
LTM4608A / LTM4608AIY#PBF LTM4608A / LTM4608AMPV#PBF LTM4608A / LTM4608AMPY LTM4608A / LTM4608AMPY#PBF LTM4609 / LTM4609EV#PBF
LTM4609 / LTM4609EY#PBF LTM4609 / LTM4609IV#PBF LTM4609 / LTM4609IY LTM4609 / LTM4609IY#PBF LTM4609 / LTM4609MPV#PBF
LTM4609 / LTM4609MPY LTM4609 / LTM4609MPY#PBF LTM4611 / LTM4611EV#PBF LTM4611 / LTM4611IV#PBF LTM4612 / LTM4612EV#PBF
LTM4612 / LTM4612IV#PBF LTM4612 / LTM4612MPV#PBF LTM4613 / LTM4613EV#PBF LTM4613 / LTM4613EY#PBF LTM4613 / LTM4613IV#PBF
LTM4613 / LTM4613IY LTM4613 / LTM4613IY#PBF LTM4613 / LTM4613MPV#PBF LTM4613 / LTM4613MPY LTM4613 / LTM4613MPY#PBF
LTM4614 / LTM4614EV#PBF LTM4614 / LTM4614IV#PBF LTM4615 / LTM4615EV#PBF LTM4615 / LTM4615IV#PBF LTM4616 / LTM4616EV#PBF
LTM4616 / LTM4616EY#PBF LTM4616 / LTM4616IV#PBF LTM4616 / LTM4616IY LTM4616 / LTM4616IY#PBF LTM4616 / LTM4616MPV#PBF
LTM4616 / LTM4616MPY LTM4616 / LTM4616MPY#PBF LTM4618 / LTM4618EV#PBF LTM4618 / LTM4618EY#PBF LTM4618 / LTM4618IV#PBF
Analog Devices, Inc. PCN 20_0123_Rev_- Page 2 of 5
LTM4618 / LTM4618IY#PBF LTM4619 / LTM4619EV#2FTPBF LTM4619 / LTM4619EV#PBF LTM4619 / LTM4619IV#PBF LTM4620 / LTM4620EV#PBF
LTM4620 / LTM4620EY#PBF LTM4620 / LTM4620IV#PBF LTM4620 / LTM4620IY LTM4620 / LTM4620IY#PBF LTM4620 / LTM4620MPY
LTM4620 / LTM4620MPY#PBF LTM4620A / LTM4620AEV#2HKPBF LTM4620A / LTM4620AEV#PBF LTM4620A / LTM4620AEY#PBF LTM4620A / LTM4620AIV#PBF
LTM4620A / LTM4620AIY LTM4620A / LTM4620AIY#PBF LTM4620A / LTM4620AMPY LTM4620A / LTM4620AMPY#PBF LTM4622 / LTM4622EV#2MDPBF
LTM4622 / LTM4622EV#3KVPBF LTM4622 / LTM4622EV#3LLPBF LTM4622 / LTM4622EV#PBF LTM4622 / LTM4622EY#3KVPBF LTM4622 / LTM4622EY#3LFPBF
LTM4622 / LTM4622EY#3NRPBF LTM4622 / LTM4622EY#PBF LTM4622 / LTM4622IV#3KVPBF LTM4622 / LTM4622IV#3LLPBF LTM4622 / LTM4622IV#PBF
LTM4622 / LTM4622IY LTM4622 / LTM4622IY#3KVPBF LTM4622 / LTM4622IY#3LF LTM4622 / LTM4622IY#3LFPBF LTM4622 / LTM4622IY#3LTPBF
LTM4622 / LTM4622IY#PBF LTM4622A / LTM4622AEV#PBF LTM4622A / LTM4622AEY#PBF LTM4622A / LTM4622AIV#PBF LTM4622A / LTM4622AIY
LTM4622A / LTM4622AIY#PBF LTM4623 / LTM4623EV#PBF LTM4623 / LTM4623EY#PBF LTM4623 / LTM4623IV#PBF LTM4623 / LTM4623IY
LTM4623 / LTM4623IY#PBF LTM4624 / LTM4624EY#2MHPBF LTM4624 / LTM4624EY#PBF LTM4624 / LTM4624IY LTM4624 / LTM4624IY#PBF
LTM4625 / LTM4625EY#PBF LTM4625 / LTM4625IY LTM4625 / LTM4625IY#3ZZ LTM4625 / LTM4625IY#PBF LTM4626 / LTM4626EY#PBF
LTM4626 / LTM4626IY LTM4626 / LTM4626IY#PBF LTM4627 / LTM4627EV#PBF LTM4627 / LTM4627EY#PBF LTM4627 / LTM4627IV#PBF
LTM4627 / LTM4627IY LTM4627 / LTM4627IY#PBF LTM4627 / LTM4627MPY LTM4627 / LTM4627MPY#PBF LTM4628 / LTM4628EV#2HUPBF
LTM4628 / LTM4628EV#PBF LTM4628 / LTM4628EY#PBF LTM4628 / LTM4628IV#PBF LTM4628 / LTM4628IY LTM4628 / LTM4628IY#PBF
LTM4630 / LTM4630EV#2LVPBF LTM4630 / LTM4630EV#PBF LTM4630 / LTM4630EY#PBF LTM4630 / LTM4630IV#2LVPBF LTM4630 / LTM4630IV#PBF
LTM4630 / LTM4630IY LTM4630 / LTM4630IY#2LWPBF LTM4630 / LTM4630IY#PBF LTM4630-1 / LTM4630EY-1A#PBF LTM4630-1 / LTM4630EY-1B#PBF
LTM4630-1 / LTM4630IY-1A LTM4630-1 / LTM4630IY-1A#PBF LTM4630-1 / LTM4630IY-1B LTM4630-1 / LTM4630IY-1B#PBF LTM4630A / LTM4630AEV#PBF
LTM4630A / LTM4630AEY#PBF LTM4630A / LTM4630AIV#PBF LTM4630A / LTM4630AIY#PBF LTM4631 / LTM4631EV#PBF LTM4631 / LTM4631EY#PBF
LTM4631 / LTM4631IV#PBF LTM4631 / LTM4631IY LTM4631 / LTM4631IY#PBF LTM4632 / LTM4632EV#3LZPBF LTM4632 / LTM4632EV#PBF
LTM4632 / LTM4632EY#2NEPBF LTM4632 / LTM4632EY#PBF LTM4632 / LTM4632IV#PBF LTM4632 / LTM4632IY LTM4632 / LTM4632IY#PBF
LTM4633 / LTM4633EY#PBF LTM4633 / LTM4633IY LTM4633 / LTM4633IY#2KDPBF LTM4633 / LTM4633IY#PBF LTM4633 / LTM4633MPY
LTM4633 / LTM4633MPY#PBF LTM4634 / LTM4634EY#PBF LTM4634 / LTM4634IY LTM4634 / LTM4634IY#PBF LTM4636 / LTM4636EY#PBF
LTM4636 / LTM4636IY#PBF LTM4636-1 / LTM4636EY-1#PBF LTM4636-1 / LTM4636IY-1#PBF LTM4637 / LTM4637EV#PBF LTM4637 / LTM4637EY#PBF
LTM4637 / LTM4637IV#PBF LTM4637 / LTM4637IY LTM4637 / LTM4637IY#PBF LTM4638 / LTM4638EY#PBF LTM4638 / LTM4638IY
LTM4638 / LTM4638IY#PBF LTM4639 / LTM4639EY#PBF LTM4639 / LTM4639IY LTM4639 / LTM4639IY#PBF LTM4641 / LTM4641EY#PBF
LTM4641 / LTM4641IY LTM4641 / LTM4641IY#PBF LTM4641 / LTM4641MPY LTM4641 / LTM4641MPY#PBF LTM4642 / LTM4642EY#PBF
LTM4642 / LTM4642IY LTM4642 / LTM4642IY#PBF LTM4643 / LTM4643EV#PBF LTM4643 / LTM4643EY#PBF LTM4643 / LTM4643IV#PBF
LTM4643 / LTM4643IY LTM4643 / LTM4643IY#PBF LTM4643 / LTM4643MPV#PBF LTM4643 / LTM4643MPY LTM4643 / LTM4643MPY#PBF
LTM4644 / LTM4644EY#2HVPBF LTM4644 / LTM4644EY#3ODPBF LTM4644 / LTM4644EY#PBF LTM4644 / LTM4644EY-1#3ODPBF LTM4644 / LTM4644EY-1#PBF
LTM4644 / LTM4644IY LTM4644 / LTM4644IY#PBF LTM4644 / LTM4644IY-1 LTM4644 / LTM4644IY-1#PBF LTM4644 / LTM4644MPY
LTM4644 / LTM4644MPY#PBF LTM4645 / LTM4645EY#PBF LTM4645 / LTM4645IY LTM4645 / LTM4645IY#PBF LTM4646 / LTM4646EY#PBF
LTM4646 / LTM4646IY LTM4646 / LTM4646IY#PBF LTM4647 / LTM4647EY#PBF LTM4647 / LTM4647IY LTM4647 / LTM4647IY#PBF
LTM4648 / LTM4648EY#PBF LTM4648 / LTM4648IY LTM4648 / LTM4648IY#PBF LTM4649 / LTM4649EY#3MDPBF LTM4649 / LTM4649EY#PBF
LTM4649 / LTM4649IY LTM4649 / LTM4649IY#PBF LTM4650 / LTM4650EY#PBF LTM4650 / LTM4650IY LTM4650 / LTM4650IY#PBF
LTM4650 / LTM4650MPY LTM4650 / LTM4650MPY#PBF LTM4650-1 / LTM4650EY-1A#PBF LTM4650-1 / LTM4650EY-1B#PBF LTM4650-1 / LTM4650IY-1A
LTM4650-1 / LTM4650IY-1A#PBF LTM4650-1 / LTM4650IY-1B LTM4650-1 / LTM4650IY-1B#PBF LTM4650A / LTM4650AEV#PBF LTM4650A / LTM4650AEY#PBF
LTM4650A / LTM4650AIV#PBF LTM4650A / LTM4650AIY LTM4650A / LTM4650AIY#PBF LTM4650A-1 / LTM4650AEY-1#PBF LTM4650A-1 / LTM4650AIY-1
LTM4650A-1 / LTM4650AIY-1#3NSPBF LTM4650A-1 / LTM4650AIY-1#PBF LTM4651 / LTM4651EY#PBF LTM4651 / LTM4651IY LTM4651 / LTM4651IY#PBF
LTM4653 / LTM4653EY#PBF LTM4653 / LTM4653IY LTM4653 / LTM4653IY#3NZPBF LTM4653 / LTM4653IY#PBF LTM4655 / LTM4655EY#3NHPBF
LTM4661 / LTM4661EY#PBF LTM4661 / LTM4661IY LTM4661 / LTM4661IY#PBF LTM4662 / LTM4662EY#PBF LTM4662 / LTM4662IY
LTM4662 / LTM4662IY#PBF LTM4664 / LTM4664EY#PBF LTM4664 / LTM4664IY#PBF LTM4668 / LTM4668EY#PBF LTM4668 / LTM4668IY#PBF
LTM4668A / LTM4668AEY#PBF LTM4668A / LTM4668AIY#PBF LTM4671 / LTM4671EY#PBF LTM4671 / LTM4671IY#PBF LTM4675 / LTM4675EY#3LNPBF
LTM4675 / LTM4675EY#PBF LTM4675 / LTM4675IY LTM4675 / LTM4675IY#10HH-1PBF LTM4675 / LTM4675IY#PBF LTM4676A / LTM4676AEY#PBF
LTM4676A / LTM4676AIY LTM4676A / LTM4676AIY#PBF LTM4677 / LTM4677EY#PBF LTM4677 / LTM4677IY LTM4677 / LTM4677IY#PBF
LTM4678 / LTM4678EY#3NOPBF LTM4678 / LTM4678EY#PBF LTM4678 / LTM4678IY LTM4678 / LTM4678IY#PBF LTM4680 / LTM4680EY#PBF
LTM4680 / LTM4680IY LTM4680 / LTM4680IY#PBF LTM4686 / LTM4686EV#PBF LTM4686 / LTM4686IV#10HC-1PBF LTM4686 / LTM4686IV#10HD-1PBF
LTM4686 / LTM4686IV#10HE-1PBF LTM4686 / LTM4686IV#10HF-1PBF LTM4686 / LTM4686IV#PBF LTM4686-1 / LTM4686EV-1#PBF LTM4686-1 / LTM4686IV-1#PBF
LTM4700 / LTM4700EY#PBF LTM4700 / LTM4700IY LTM4700 / LTM4700IY#PBF LTM8001 / LTM8001EY#3NQPBF LTM8001 / LTM8001EY#PBF
LTM8001 / LTM8001IY LTM8001 / LTM8001IY#PBF LTM8001 / LTM8001MPY LTM8001 / LTM8001MPY#PBF LTM8002 / LTM8002HY
LTM8002 / LTM8002HY#PBF LTM8002 / LTM8002HY-3.3#PBF LTM8002 / LTM8002IY#PBF LTM8002 / LTM8002IY-3.3#PBF LTM8003 / LTM8003HY
LTM8003 / LTM8003HY#3ME LTM8003 / LTM8003HY#3ZZ LTM8003 / LTM8003HY#PBF LTM8003 / LTM8003HY-3.3#PBF LTM8003 / LTM8003IY
Analog Devices, Inc. PCN 20_0123_Rev_- Page 3 of 5
LTM8003 / LTM8003IY#PBF LTM8003 / LTM8003IY-3.3#PBF LTM8005 / LTM8005EY#PBF LTM8005 / LTM8005HY#A1PBF LTM8005 / LTM8005HY#PBF
LTM8005 / LTM8005IY#PBF LTM8008 / LTM8008HV#3GSPBF LTM8008 / LTM8008HV#PBF LTM8020 / LTM8020EV#PBF LTM8020 / LTM8020IV#PBF
LTM8020 / LTM8020MPV#PBF LTM8021 / LTM8021EV#PBF LTM8021 / LTM8021IV#2FZPBF LTM8021 / LTM8021IV#PBF LTM8022 / LTM8022EV#2FZPBF
LTM8022 / LTM8022EV#PBF LTM8022 / LTM8022IV#2FZPBF LTM8022 / LTM8022IV#PBF LTM8022 / LTM8022MPV#2FZPBF LTM8022 / LTM8022MPV#PBF
LTM8023 / LTM8023EV#2FZPBF LTM8023 / LTM8023EV#PBF LTM8023 / LTM8023EY#2FZPBF LTM8023 / LTM8023EY#PBF LTM8023 / LTM8023IV#2FZPBF
LTM8023 / LTM8023IV#PBF LTM8023 / LTM8023IY LTM8023 / LTM8023IY#2FZPBF LTM8023 / LTM8023IY#PBF LTM8023 / LTM8023MPV#PBF
LTM8023 / LTM8023MPY LTM8023 / LTM8023MPY#PBF LTM8024 / LTM8024EY#PBF LTM8024 / LTM8024IY#PBF LTM8025 / LTM8025EV#2FZPBF
LTM8025 / LTM8025EV#PBF LTM8025 / LTM8025EY#PBF LTM8025 / LTM8025IV#2FZPBF LTM8025 / LTM8025IV#PBF LTM8025 / LTM8025IY
LTM8025 / LTM8025IY#PBF LTM8025 / LTM8025MPV#PBF LTM8025 / LTM8025MPY LTM8025 / LTM8025MPY#PBF LTM8026 / LTM8026EV#2FVPBF
LTM8026 / LTM8026EV#PBF LTM8026 / LTM8026EY#PBF LTM8026 / LTM8026IV#PBF LTM8026 / LTM8026IY LTM8026 / LTM8026IY#PBF
LTM8026 / LTM8026MPV#PBF LTM8026 / LTM8026MPY LTM8026 / LTM8026MPY#PBF LTM8027 / LTM8027EV#PBF LTM8027 / LTM8027EY#PBF
LTM8027 / LTM8027IV#2FZPBF LTM8027 / LTM8027IV#PBF LTM8027 / LTM8027IY LTM8027 / LTM8027IY#PBF LTM8027 / LTM8027MPV#PBF
LTM8027 / LTM8027MPY LTM8027 / LTM8027MPY#PBF LTM8028 / LTM8028EY#PBF LTM8028 / LTM8028IY LTM8028 / LTM8028IY#PBF
LTM8028 / LTM8028MPY LTM8028 / LTM8028MPY#PBF LTM8029 / LTM8029EY#PBF LTM8029 / LTM8029IY LTM8029 / LTM8029IY#PBF
LTM8029 / LTM8029MPY LTM8029 / LTM8029MPY#PBF LTM8031 / LTM8031EV#PBF LTM8031 / LTM8031IV#PBF LTM8031 / LTM8031MPV#PBF
LTM8032 / LTM8032EV#2FZPBF LTM8032 / LTM8032EV#PBF LTM8032 / LTM8032EY#2FZPBF LTM8032 / LTM8032EY#PBF LTM8032 / LTM8032IV#2FZPBF
LTM8032 / LTM8032IV#PBF LTM8032 / LTM8032IY LTM8032 / LTM8032IY#2FZPBF LTM8032 / LTM8032IY#PBF LTM8032 / LTM8032MPV#PBF
LTM8032 / LTM8032MPY LTM8032 / LTM8032MPY#2FZPBF LTM8032 / LTM8032MPY#PBF LTM8033 / LTM8033EV#PBF LTM8033 / LTM8033EY#PBF
LTM8033 / LTM8033IV#PBF LTM8033 / LTM8033IY LTM8033 / LTM8033IY#PBF LTM8033 / LTM8033MPV#PBF LTM8033 / LTM8033MPY
LTM8033 / LTM8033MPY#PBF LTM8040 / LTM8040EV#PBF LTM8040 / LTM8040IV#PBF LTM8042 / LTM8042EV#PBF LTM8042 / LTM8042EV-1#PBF
LTM8042 / LTM8042IV#PBF LTM8042 / LTM8042IV-1#PBF LTM8045 / LTM8045EY#PBF LTM8045 / LTM8045IY LTM8045 / LTM8045IY#3NYPBF
LTM8045 / LTM8045IY#PBF LTM8045 / LTM8045MPY LTM8045 / LTM8045MPY#PBF LTM8046 / LTM8046#2MMPBF LTM8046 / LTM8046EY#PBF
LTM8046 / LTM8046EY-1#2KXPBF LTM8046 / LTM8046IY LTM8046 / LTM8046IY#PBF LTM8046 / LTM8046MPY LTM8046 / LTM8046MPY#PBF
LTM8047 / LTM8047EY#PBF LTM8047 / LTM8047IY LTM8047 / LTM8047IY#PBF LTM8047 / LTM8047MPY LTM8047 / LTM8047MPY#PBF
LTM8048 / LTM8048EY#2GJPBF LTM8048 / LTM8048EY#PBF LTM8048 / LTM8048IY LTM8048 / LTM8048IY#PBF LTM8048 / LTM8048MPY
LTM8048 / LTM8048MPY#2GJPBF LTM8048 / LTM8048MPY#PBF LTM8049 / LTM8049EY#3OAPBF LTM8049 / LTM8049EY#PBF LTM8049 / LTM8049IY
LTM8049 / LTM8049IY#PBF LTM8050 / LTM8050EY#PBF LTM8050 / LTM8050IY LTM8050 / LTM8050IY#PBF LTM8050 / LTM8050MPY
LTM8050 / LTM8050MPY#PBF LTM8052 / LTM8052AEV#PBF LTM8052 / LTM8052AEY#PBF LTM8052 / LTM8052AIV#PBF LTM8052 / LTM8052AIY
LTM8052 / LTM8052AIY#PBF LTM8052 / LTM8052AMPV#PBF LTM8052 / LTM8052AMPY LTM8052 / LTM8052AMPY#PBF LTM8052 / LTM8052EV#PBF
LTM8052 / LTM8052EY#PBF LTM8052 / LTM8052IV#PBF LTM8052 / LTM8052IY LTM8052 / LTM8052IY#PBF LTM8052 / LTM8052MPV#PBF
LTM8052 / LTM8052MPY LTM8052 / LTM8052MPY#PBF LTM8053 / LTM8053EY#PBF LTM8053 / LTM8053EY-1#PBF LTM8053 / LTM8053IY#PBF
LTM8053 / LTM8053IY-1#PBF LTM8054 / LTM8054EY#PBF LTM8054 / LTM8054IY LTM8054 / LTM8054IY#PBF LTM8054 / LTM8054MPY
LTM8054 / LTM8054MPY#PBF LTM8055 / LTM8055EY#PBF LTM8055 / LTM8055EY-1#PBF LTM8055 / LTM8055IY LTM8055 / LTM8055IY#PBF
LTM8055 / LTM8055IY-1#PBF LTM8055 / LTM8055MPY LTM8055 / LTM8055MPY#PBF LTM8056 / LTM8056EY#PBF LTM8056 / LTM8056IY
LTM8056 / LTM8056IY#PBF LTM8056 / LTM8056MPY LTM8056 / LTM8056MPY#PBF LTM8057 / LTM8057EY#PBF LTM8057 / LTM8057IY
LTM8057 / LTM8057IY#PBF LTM8057 / LTM8057MPY LTM8057 / LTM8057MPY#PBF LTM8058 / LTM8058EY#PBF LTM8058 / LTM8058IY
LTM8058 / LTM8058IY#PBF LTM8058 / LTM8058MPY LTM8058 / LTM8058MPY#PBF LTM8061 / LTM8061EV-4.1#PBF LTM8061 / LTM8061EV-4.2#PBF
LTM8061 / LTM8061EV-8.2#PBF LTM8061 / LTM8061EV-8.4#PBF LTM8061 / LTM8061IV-4.1#2FZPBF LTM8061 / LTM8061IV-4.1#PBF LTM8061 / LTM8061IV-4.2#PBF
LTM8061 / LTM8061IV-8.2#PBF LTM8061 / LTM8061IV-8.4#PBF LTM8062 / LTM8062AEV#PBF LTM8062 / LTM8062AIV#PBF LTM8062 / LTM8062EV#PBF
LTM8062 / LTM8062IV#PBF LTM8063 / LTM8063EY#PBF LTM8063 / LTM8063IY LTM8063 / LTM8063IY#PBF LTM8064 / LTM8064EY#PBF
LTM8064 / LTM8064IY LTM8064 / LTM8064IY#PBF LTM8065 / LTM8065EY#PBF LTM8065 / LTM8065IY#PBF LTM8067 / LTM8067EY#PBF
LTM8067 / LTM8067IY LTM8067 / LTM8067IY#PBF LTM8068 / LTM8068EY#3NNPBF LTM8068 / LTM8068EY#PBF LTM8068 / LTM8068IY
LTM8068 / LTM8068IY#PBF LTM8071 / LTM8071EY#PBF LTM8071 / LTM8071IY LTM8071 / LTM8071IY#PBF LTM8073 / LTM8073EY#PBF
LTM8073 / LTM8073IY LTM8073 / LTM8073IY#PBF LTM8074 / LTM8074EY#PBF LTM8074 / LTM8074IY LTM8074 / LTM8074IY#PBF
LTM8078 / LTM8078EY#PBF LTM8078 / LTM8078IY#3ZZPBF LTM8078 / LTM8078IY#PBF LTM9100 / LTM9100CY#PBF LTM9100 / LTM9100HY#PBF
LTM9100 / LTM9100IY#PBF
Analog Devices, Inc. PCN 20_0123_Rev_- Page 4 of 5
Appendix B - Revision History
Rev Publish Date Effectivity Date Rev Description
Rev. - 28-Feb-2020 01-Jun-2020 Initial Release
Analog Devices, Inc. DocId:8075 Parent DocId:8073 Layout Rev:7
Analog Devices, Inc. PCN 20_0123_Rev_- Page 5 of 5
TITLE:
LTM4620A Test Site Transfer from Analog Devices Singapore to
Analog Devices Penang
PCN Number:
REVISION:
A
DATE:
JANUARY 17, 2020
CONTENTS:
Summary
Table 1 – LTM4620A Test Details
Table 2 - Qualification Activities and Acceptance Criteria
Table 3 – Correlation Device Run Results
Table 4 – Product Site Transfer Correlation
Table 5 – GR&R Result
PROJECT BACKGROUND:
The LTM4620A is currently undergoing production testing at the Analog Devices Singapore (ADSG). It
was a strategic decision from business standpoint to qualify Analog Devices Penang (ADPG) to become
as new test site to ensure a continuity in the supply chain due to ADSG plant shutdown. ADPG is situated
in Bayan Lepas, Penang, Malaysia.
After qualification and replication of necessary test capability, ADPG will serve as the primary test site
facility to serve for micromodule future demands.
SUMMARY:
The LTM4620A is a complete dual 13A output switching mode DC/DC power supply. Included in the
package are the switching controller, power FETs, inductors, and all supporting components. Operating
from an input voltage range of 4.5V to 16V, the LTM4620A supports two outputs each with an output
voltage range of 0.6V to 2.5V, set by a single external resistor. Its high efficiency design delivers up to 13A
continuous current for each output. Only a few input and output capacitors are needed.
TEST AND PRODUCT INFORMATION:
Device: LTM4620A
Package: BGA
Leads: 144L
FG Part Name: LTM4620AIY#PBF
Tester Platform: ETS-364B
Handler: Multitest MT9510
The LTM4620A is planned to be tested in Analog Devices Penang (ADPG) using the following as shown in
the Table 1 below:
Table 1: LTM4620A Test Details
Parameters ADSG ADPG Remarks Tester Platform ETS364B ETS364B No change
Handler MT9510 MT9510 No Change
Test Flow Tested in FT room and QA room, hot, cold temp per
setup specification.
Tested in FT room and QA room, hot, cold temp per
setup specification.
No Change
Contactor 144 Lds Gemini Kelvin 144 Lds Gemini Kelvin No Change
Performance Board LTM4620 Dualsite LTM4620 Dualsite No change (Apply ADI Hardware naming
standard)
Test Program LTM4620A_06 LTM4620A_06 No change (Apply ADI Program Filename
Standard)
There is no change to the form, fit and function of the product.
This report documents the successful completion of the product test transfer requirements of
LTM4620A at ADPG.
DESCRIPTION AND TEST RESULTS:
Below tables provide description of the qualification tests conducted and corresponding test results for LTM4620A. All the units have undergone electrical tests on both the sending and receiving sites on the same test platform. Any device that will not meet the electrical qualification requirements will mean failure of the qualification and require solid corrective actions and a repeat of the qualification process. Qualification activities performed, and acceptance criteria is shown on Table 2 below:
Table 2: Qualification Activities and Acceptance Criteria
Qualification Activity Sample Quantity Accept Criteria Correlation device run 5 correlation device units *100% Passing correlation devices
Correlation Lot Run
Minimum of 300 known Bin1 units tested in full product test flow (ALL temperature passes). Test lot in Sending site (ADSG) and Receiving site (ADGT).
*CpK≥1.67* For tightened limits, Mean ShiftCriteria and sigma-spread criteriato apply* Mean Shift Criteria(ABS (SS_mean - RS_Mean) /
Limit Range ) x 100 ≤ 5%* Sigma-spread criteria* (RS_Sigma / SS_Sigma ) ≤ 1.3
GR&R 10 Bin 1 units tested on 1 board and 2 testers
R&R % =<10%
• SS = Sending Site
• RS = Receiving Site
To validate full set-up functionality such as hardware, software, test paraphernalia and tester platform, 5
correlation devices of LTM4620A were tested both in ADSG and ADPG. Data between sites were analyzed
and summarized in Table 3.
Table 3: Correlation Device Run result
Generic Package No. of correlation device
ALL correlation devices passed?
LTM4620 BGA 144 Leads 5 units YES
The LTM4620A was qualified by testing a correlation lot with minimum 300 units both in ADSG and ADPG.
This is to capture variation in hardware, tester and set-up condition thru mean shift and sigma spread.
This is to ensure the parameter measurement are still within the accepted range of variations. Data
between sites were analyzed and summarized in Table 4.
Table 4: Product Site Transfer Correlation
Temperature Generic Package Lot Number Lot Size
Sending Site
Receiving Site
Total No. of Correlation Parameters
Result
Ambient LTM4620 BGA 144 Leads
1040166.4 357 ADSG ADPG 328 ALL PASSED
Hot LTM4620 BGA 144 Leads
1040166.4 349 ADSG ADPG 329 ALL PASSED
Cold LTM4620 BGA 144 Leads
1040166.4 352 ADSG ADPG 311 ALL PASSED
To gather test performance data to allow estimation of the overall test repeatability and reproducibility
from the production test solution, GR&R was performed on 10 serialized units tested on 1 test board
and 2 test systems. GR&R result was analyzed and summarized in Table 7.
Table 5: GR&R Result
Generic Package Lot Number No. of Units
No. of Test Boards
No. of Testers All parameters passed R&R % =<10%?
LTM4620 BGA 144 Leads
1040166.4 10 1 2 Yes – ALL PASSED (Justification provided for the
test exceeding 10%)
APPROVALS:
Technical Review Board No. 62174- ADSG to ADPG Test Transfer
ADDITIONAL INFORMATION:
Homepage: https://www.analog.com/en/index.html
Customer Service: https://www.analog.com/en/support/technical-support.html
TITLE:
LTM4622 Test Site Transfer from Analog Devices Singapore to
Analog Devices Penang
PCN Number:
REVISION:
A
DATE:
JANUARY 17, 2020
CONTENTS:
Summary
Table 1 – LTM4622 Test Details
Table 2 - Qualification Activities and Acceptance Criteria
Table 3 – Correlation Device Run Results
Table 4 – Product Site Transfer Correlation
Table 5 – GR&R Result
PROJECT BACKGROUND:
The LTM4622 is currently undergoing production testing at the Analog Devices Singapore (ADSG). It was
a strategic decision from business standpoint to qualify Analog Devices Penang (ADPG) to become as
new test site to ensure a continuity in the supply chain due to ADSG plant shutdown. ADPG is situated in
Bayan Lepas, Penang, Malaysia.
After qualification and replication of necessary test capability, ADPG will serve as the primary test site
facility to serve for micromodule future demands.
SUMMARY:
The LTM4622 is a complete dual 2.5A step-down switching mode µModule® (power module) regulator
in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA packages.
Included in the package are the switching controller, power FETs, inductor and support components.
Operating over an input voltage range of 3.6V to 20V, the LTM4622 supports an output voltage range of
0.6V to 5.5V, set by a single external resistor. Its high efficiency design delivers dual 2.5A continuous, 3A
peak, output current. Only a few ceramic input and output capacitors are needed.
TEST AND PRODUCT INFORMATION:
Device: LTM4622
Package: BGA
Leads: 25L
FG Partname: LTM4622IY#PBF
Tester Platform: ETS-364B
Handler: Multitest MT9510
The LTM4622 is planned to be tested in Analog Devices Penang (ADPG) using the following as shown in
the Table 1 below:
Table 1: LTM4622 Test Details
Parameters ADSG ADPG Remarks Tester Platform ETS364B ETS364B No change
Handler MT9510 MT9510 No Change
Test Flow Tested in FT room and QA room, hot, cold temp per
setup specification.
Tested in FT room and QA room, hot, cold temp per
setup specification.
No Change
Contactor 25 Lds Gemini Kelvin 25 Lds Gemini Kelvin No Change
Performance Board LTM4622 LTM4622 No change (Apply ADI Hardware naming
standard)
Test Program LTM4622_01 LTM4622_01 No change (Apply ADI Program Filename
Standard)
There is no change to the form, fit and function of the product.
This report documents the successful completion of the product test transfer requirements of LTM4622
at ADPG.
DESCRIPTION AND TEST RESULTS:
Below tables provide description of the qualification tests conducted and corresponding test results for LTM4622. All the units have undergone electrical tests on both the sending and receiving sites on the same test platform. Any device that will not meet the electrical qualification requirements will mean failure of the qualification and require solid corrective actions and a repeat of the qualification process. Qualification activities performed, and acceptance criteria is shown on Table 2 below:
Table 2: Qualification Activities and Acceptance Criteria
Qualification Activity Sample Quantity Accept Criteria Correlation device run 5 correlation device units *100% Passing correlation devices
Correlation Lot Run
Minimum of 300 known Bin1 units tested in full product test flow (ALL temperature passes). Test lot in Sending site (ADSG) and Receiving site (ADGT).
*CpK≥1.67* For tightened limits, Mean ShiftCriteria and sigma-spread criteriato apply* Mean Shift Criteria(ABS (SS_mean - RS_Mean) /
Limit Range ) x 100 ≤ 5%* Sigma-spread criteria* (RS_Sigma / SS_Sigma ) ≤ 1.3
GR&R 10 Bin 1 units tested on 1 board and 2 testers
R&R % =<10%
• SS = Sending Site
• RS = Receiving Site
To validate full set-up functionality such as hardware, software, test paraphernalia and tester platform, 5
correlation devices of LTM4622 were tested both in ADSG and ADPG. Data between sites were analyzed
and summarized in Table 3.
Table 3: Correlation Device Run result
Generic Package No. of correlation device
ALL correlation devices passed?
LTM4622 BGA 25 Leads 5 units YES
The LTM4622 was qualified by testing a correlation lot with minimum 300 units both in ADSG and ADPG.
This is to capture variation in hardware, tester and set-up condition thru mean shift and sigma spread.
This is to ensure the parameter measurement are still within the accepted range of variations. Data
between sites were analyzed and summarized in Table 4.
Table 4: Product Site Transfer Correlation
Temperature Generic Package Lot Number Lot Size
Sending Site
Receiving Site
Total No. of Correlation Parameters
Result
Ambient LTM4622 BGA 25 Leads
1040166.4 514 ADSG ADPG 180 ALL PASSED
Hot LTM4622 BGA 25 Leads
1040166.4 507 ADSG ADPG 194 ALL PASSED
Cold LTM4622 BGA 25 Leads
1040166.4 507 ADSG ADPG 185 ALL PASSED
To gather test performance data to allow estimation of the overall test repeatability and reproducibility
from the production test solution, GR&R was performed on 10 serialized units tested on 1 test board
and 2 test systems. GR&R result was analyzed and summarized in Table 7.
Table 5: GR&R Result
Generic Package Lot Number No. of Units
No. of Test Boards
No. of Testers All parameters passed R&R % =<10%?
LTM4622 BGA 25 Leads 1040166.4 10 1 2 Yes – ALL PASSED (Justification provided for the
test exceeding 10%)
APPROVALS:
Technical Review Board No. 62174- ADSG to ADPG Test Transfer
ADDITIONAL INFORMATION:
Homepage: https://www.analog.com/en/index.html
Customer Service: https://www.analog.com/en/support/technical-support.html
TITLE:
LTM4644 Test Site Transfer from Analog Devices Singapore to Analog Devices Penang
PCN Number:
REVISION:
A
DATE:
JAN 17, 2020
CONTENTS:
Summary
Table 1 – LTM4644 Test Details
Table 2 - Qualification Activities and Acceptance Criteria
Table 3 – Correlation Device Run Results
Table 4 – Product Site Transfer Correlation
Table 5 - GR&R Result
PROJECT BACKGROUND:
The LTM4644 is currently undergoing production testing at the Analog Devices Singapore (ADSG). It was
a strategic decision from business standpoint to qualify Analog Devices Penang (ADPG) to become as new
test site to ensure a continuity in the supply chain due to ADSG plant shutdown. ADPG is situated in Bayan
Lepas, Penang, Malaysia.
After qualification of necessary test capability, ADPG will serve as the primary test site facility to serve for
micromodule future demands.
SUMMARY:
The LTM4644/LTM4644-1 is a quad DC/DC step-down µModule (micromodule) regulator with 4A per
output. Outputs can be paralleled in an array for up to 16A capability. Included in the package are the
switching controllers, power FETs, inductors and support components. Operating over an input voltage
range of 4V to 14V or 2.375V to 14V with an external bias supply, the LTM4644/LTM4644-1 supports an
output voltage range of 0.6V to 5.5V
TEST AND PRODUCT INFORMATION:
Device: LTM4644
Package: BGA
Leads: 77 leads
FG Partname: LTM4644IY#PBF
Tester Platform: ETS364B
Handler: Multitest MT9510
The LTM4644 is planned to be tested in Analog Devices Penang (ADPG) using the following as shown in
the Table 1 below:
Table 1: LTM4644 Test Details
Parameters ADSG ADPG Remarks Tester Platform ETS364B ETS364B No change
Handler MT9510 MT9510 No Change
Test Flow Tested in FT room and QA room, hot, cold temp per
setup specification.
Tested in FT room and QA room, hot, cold temp per
setup specification.
No Change
Contactor 77 Lds Gemini Kelvin 77 Lds Gemini Kelvin No Change
Performance Board LTM4644 Test Board
LTM4644 Test Board
No change
Test Program LTM4644_04 LTM4644_04 No change
There is no change to the form, fit and function of the product.
This report documents the successful completion of the product test transfer requirements of LTM4644
at ADPG.
DESCRIPTION AND TEST RESULTS:
Below tables provide description of the qualification tests conducted and corresponding test results for LTM4644. All the units have undergone electrical tests on both the sending and receiving sites on the same test platform. Any device that will not meet the electrical qualification requirements will mean failure of the qualification and require solid corrective actions and a repeat of the qualification process. Qualification activities performed, and acceptance criteria is shown on Table 2 below:
Table 2: Qualification Activities and Acceptance Criteria
Qualification Activity Sample Quantity Accept Criteria
Correlation device run 5 correlation device units *100% Passing correlation devices
Correlation Lot Run
Minimum of 300 known Bin1 units tested in full product test flow (ALL temperature passes). Test lot in Sending site (ADSG) and Receiving site (ADPG).
*CpK≥1.67* For tightened limits, MeanShift Criteria and sigma-spreadcriteria to apply* Mean Shift Criteria(ABS (SS_mean - RS_Mean) /
Limit Range ) x 100 ≤ 5%* Sigma-spread criteria* (RS_Sigma / SS_Sigma ) ≤ 1.3
GR&R 10 Bin 1 units tested on 1 board and 2 testers
R&R % =<10%
• SS = Sending Site
• RS = Receiving Site
To validate full set-up functionality such as hardware, software and tester platform, 5 correlation devices
of LTM4644 were tested both in ADSG and ADPG. Data between sites were analyzed and summarized in
Table 3.
Table 3: Correlation Device Run result
Generic Package No. of correlation device
ALL correlation devices passed?
LTM4644 BGA 77 Leads 5 units YES
The LTM4644 was qualified by testing a correlation lot with minimum 300 units both in ADSG and ADPG.
This is to capture variation in hardware, tester and set-up condition thru mean shift and sigma spread.
This is to ensure the parameter measurement are still within the accepted range of variations. Data
between sites were analyzed and summarized in Table 4.
Table 4: Product Site Transfer Correlation
Temperature Generic Package Lot Number Lot Size
Sending Site
Receiving Site
Total No. of Correlation Parameters
Result
Ambient LTM4644 BGA 77 Leads
1039147.7 1151 ADSG ADPG 420 ALL PASSED
Hot LTM4644 BGA 77 Leads
1039147.7 1000 ADSG ADPG 505 ALL PASSED
Cold LTM4644 BGA 77 Leads
1039147.7 1000 ADSG ADPG 466 ALL PASSED
To gather test performance data to allow estimation of the overall test repeatability and reproducibility
from the production test solution, GR&R was performed on 10 serialized units tested on 1 test board
and 2 test systems. GR&R result was analyzed and summarized in Table 5.
Table 5: GR&R Result
Generic Package Lot Number No. of Units
No. of Test Boards
No. of Testers All parameters passed R&R % =<10%?
LTM4644 BGA 77 Leads
1039147.7 10 1 2 Yes – ALL PASSED
(Justification provided for the tests exceeding 10%)
APPROVALS:
Technical Review Board No. 60579 - ADSG to ADPG Test Transfer
ADDITIONAL INFORMATION:
Homepage: https://www.analog.com/en/index.html
Customer Service: https://www.analog.com/en/support/technical-support.html
TITLE:
LTM8008 Test Site Transfer from Analog Devices Singapore to Analog Devices Penang
PCN Number:
REVISION:
A
DATE:
JAN 17, 2020
CONTENTS:
Summary
Table 1 – LTM8008 Test Details
Table 2 - Qualification Activities and Acceptance Criteria
Table 3 – Correlation Device Run Results
Table 4 – Product Site Transfer Correlation
Table 5 - GR&R Result
PROJECT BACKGROUND:
The LTM8008 is currently undergoing production testing at the Analog Devices Singapore (ADSG). It was
a strategic decision from business standpoint to qualify Analog Devices Penang (ADPG) to become as new
test site to ensure a continuity in the supply chain due to ADSG plant shutdown. ADPG is situated in Bayan
Lepas, Penang, Malaysia.
After qualification of necessary test capability, ADPG will serve as the primary test site facility to serve for
micromodule future demands.
SUMMARY:
The LTM8008 is a 72VIN, µModule® SEPIC converter with six post regulators. The SEPIC controller’s fixed
frequency, current-mode architecture results in stable operation over a wide range of supply and output
voltages and features soft-start and frequency foldback functions to limit inductor current during start-up
and output short-circuit.
The LTM8008 also includes six high performance, fixed output LDOs for post-regulation: one 5V at 500mA,
one 3.3V at 300mA, and four 5V at 150mA. The output of the SEPIC controller is internally set to 5.6V for
optimal efficiency. In addition to providing these outputs, the SEPIC converter can supply up to an
additional 500mA to the system load.
TEST AND PRODUCT INFORMATION:
Device: LTM8008
Package: LGA
Leads: 121 leads
FG Partname: LTM8008HV#3GSPBF
Tester Platform: ETS364B
Handler: Multitest MT9510
The LTM8008 is planned to be tested in Analog Devices Penang (ADPG) using the following as shown in
the Table 1 below:
Table 1: LTM8008 Test Details
Parameters ADSG ADPG Remarks Tester Platform ETS364B ETS364B No change
Handler MT9510 MT9510 No Change
Test Flow Tested in FT room and QA room, hot, cold temp per
setup specification.
Tested in FT room and QA room, hot, cold temp per
setup specification.
No Change
Contactor 121 Lds ECT 77 Lds ECT No Change
Performance Board LTM8008 QUADSITE LTM8008 QUADSITE No change
Test Program LTM8008_00 LTM8008_00 No change
There is no change to the form, fit and function of the product.
This report documents the successful completion of the product test transfer requirements of LTM8008
at ADPG.
DESCRIPTION AND TEST RESULTS:
Below tables provide description of the qualification tests conducted and corresponding test results for LTM8008. All the units have undergone electrical tests on both the sending and receiving sites on the same test platform. Any device that will not meet the electrical qualification requirements will mean failure of the qualification and require solid corrective actions and a repeat of the qualification process. Qualification activities performed, and acceptance criteria is shown on Table 2 below:
Table 2: Qualification Activities and Acceptance Criteria
Qualification Activity Sample Quantity Accept Criteria
Correlation device run 5 correlation device units *100% Passing correlation devices
Correlation Lot Run
Minimum of 300 known Bin1 units tested in full product test flow (ALL temperature passes). Test lot in Sending site (ADSG) and Receiving site (ADPG).
*CpK≥1.67* For tightened limits, MeanShift Criteria and sigma-spreadcriteria to apply* Mean Shift Criteria(ABS (SS_mean - RS_Mean) /
Limit Range ) x 100 ≤ 5%* Sigma-spread criteria* (RS_Sigma / SS_Sigma ) ≤ 1.3
GR&R 10 Bin 1 units tested on 1 board and 2 testers
R&R % =<10%
• SS = Sending Site
• RS = Receiving Site
To validate full set-up functionality such as hardware, software and tester platform, 5 correlation devices
of LTM8008 were tested both in ADSG and ADPG. Data between sites were analyzed and summarized in
Table 3.
Table 3: Correlation Device Run result
Generic Package No. of correlation device
ALL correlation devices passed?
LTM8008 LGA 121 Leads 5 units YES
The LTM8008 was qualified by testing a correlation lot with minimum 300 units both in ADSG and ADPG.
This is to capture variation in hardware, tester and set-up condition thru mean shift and sigma spread.
This is to ensure the parameter measurement are still within the accepted range of variations. Data
between sites were analyzed and summarized in Table 4.
Table 4: Product Site Transfer Correlation
Temperature Generic Package Lot Number Lot Size
Sending Site
Receiving Site
Total No. of Correlation Parameters
Result
Ambient LTM8008 LGA 121 Leads
Z48258.10 1190 ADSG ADPG 97 ALL PASSED
Hot LTM8008 LGA 121 Leads
Z48258.10 1153 ADSG ADPG 104 ALL PASSED
Cold LTM8008 LGA 121 Leads
Z48258.10 1155 ADSG ADPG 98 ALL PASSED
To gather test performance data to allow estimation of the overall test repeatability and reproducibility
from the production test solution, GR&R was performed on 10 serialized units tested on 1 test board
and 2 test systems. GR&R result was analyzed and summarized in Table 5.
Table 5: GR&R Result
Generic Package Lot Number No. of Units
No. of Test Boards
No. of Testers All parameters passed R&R % =<10%?
LTM8008 LGA 121 Leads Z48258.10 10 1 2 Yes – ALL PASSED
(Justification provided for the tests exceeding 10%)
APPROVALS:
Technical Review Board No 62174- ADSG to ADPG Test Transfer
ADDITIONAL INFORMATION:
Homepage: https://www.analog.com/en/index.html
Customer Service: https://www.analog.com/en/support/technical-support.html