www.adira.pt
des
ign
by
alm
ades
ign
TECHNOLOGY AND INNOVATION
ADIRA S.A.
Rua António Bessa Leite, 976/11064150-072 Porto > PORTUGALTelf. + 351 22 619 27 00Fax. + 351 22 619 27 01E-mail: [email protected] > www.adira.pt
FINANCEBeing a family business, ADIRA was awarded with the SME Leader award during 6 consecutive years, given by the national and international banks operating in Portugal. This award distinguishes the financial health of Adira.
HISTORYSince its beginning in 1956, ADIRA’s specialty is to develop innovative technical solutions to cut and bend sheet metal and therefore to manufacture machinery for the metal industry. ADIRA’s portfolio includes press brakes, shears, laser cutting machines, bending robotic cells and automatic systems to cut and bend metal plates.
HUMAN RESOURCESADIRA’s recognition of quality and efficiency is also a result of the top professionals that integrate our teams and that work daily to meet the specific needs of each client. Over 30% of our employees have a university degree.
02 03
INNOVATIONDue to the significant amount of investment made in innovation, ADIRA has been constantly receiving worldwide recognition, having received several awards such as the Cotec for innovation, the Award for Innovation from Tolexpo-Paris and, more recently, the Leonardo Da Vince prize for Innovation.
INTERNATIONALWe operate in 60 markets worldwide, with more than 5000 machines installed in the EUA. Among our clients we have companies in several sectors, aerospace industry, steel industry, automotive industry etc… but, we can also provide simple and start up solutions.
> Service Parts - Direct line
> ADIRA, Porto 1956
sustainable solutions
Performance
With almost 60 years of experience in the design and manufacture of press-brakes, ADIRA, a brand universally known for its reliability and innovation, develops every machine focused on the total satisfaction of each customer. Bending with high performance demanding and precision are possible using the most advanced and innovative engineer solutions, together with a rigid and carefully designed construction of each machine.
Do you need a simple and accurate solution for your bending problems?
04 05
The PM GUIMADIRA, with a Hexa-C frame that ensures a perfect guiding on the upper beam even when under stress, can give you an economic, accurate and simple solution for your bend, with a limited budget!Start with a low automation machine and grow at the same time as your business grows by adding retrofitting options and accessories!
This makes the PM a Perfect solution for a startup business!Available in five standard models ranging from:>> 135 To 220 tons; >> 3 To 4 meters.Pleases check out our list of accessories and options.
Double your profits, cut your costs!
The press-brake line has 6 different ranges of bending machines that fit all the different needs of customers and the best part of them are competitive but sustainable solutions.
> PM GUIMADIRA press brake
> PM GUIMADIRA press brake
SizeFeatures + Performance
Value
A turn of the page!!!With a Hexa-C frame, that ensures the accuracy of the guiding of the upper beam, this full electric machine, with bluedrive system, is able to give you the fastest bends and, simultaneously, the simplicity of the service, with savings on your energy bill.Offered with all options and accessories, this machine is a turn of the page on your bending solutions!
Available in three standard models ranging from: >> 25 To 100 tons;>> 1,2 To 3 meters.Pleases check out our list of accessories and options.
The Bluebender is the solution for you! Do you need a fast, accurate and eco-friendly bend?
06 07
> BLUEBENDER electrical press brake > BLUEBENDER electrical press brake
> PA versatile hidraulic press brake
Equipped with a Hexa-C frame that ensures bending accuracy and with an effectively designed hydraulic circuit. PA is an energy saver when compared to other hydraulic synchronized machines.The PA can be the answer for a wide variety of solutions by adding different options and accessories!
Available in six standard models ranging from: >> 135 To 220 tons; >> 3 To 4 meters. Please check out our list of accessories and options
Do you wish to make an affordable but taylor made solution?Then select a PA machine!
08 09
Do you require a more specific solution for your bendings?
> PA versatile hidraulic press brake
> PF fast hidraulic press brake
Then PF is the machine for you!
The Hexa-C frame ensures the precision on the guiding upper beam and the hybrid hydraulic circuit gives you fast, though ecological, bendings. On top of that, big wide openings allow you to achieve those intricate bendings you have been dreaming of! PF comes with a vast variety of accessories and options to make it the perfect solution for “That Bend”!
Available in seven standard models ranging from: >> 60 To 220 tons;>> 2 To 4 meters.Pleases check out our list of accessories and options.
Do you need intricate and fast bendings?
10 11
Do you do heavy duty bends?
ADIRA has a wide and long experience on heavy duty machines, and, so, is able to supply you with a conventional or Taylor made solution for your big bend!A great team of expert engineers is available to study “THE” bend for your case! Not only we have almost 60 years of solutions, but we also have the required resources in house to develop YOUR bending machine!
Available in twenty six standard models ranging from: >> 160 To 2000 tons;>> 4 To 8 meters.Pleases check out our list of accessories and options.
Trust us! We have the experience and the resources YOU need!
> PH Heavy duty press brake
> PH Heavy duty press brake
> PF robotic bending cell
> GREENBENDER press brake
Did you ever dream of an intelligent and soft adjusting machine?
12 13
A H-frame for extra stiffness, a hybrid circuit with Greendynamics system to cut your electricity bills and a capacity to self-adjust in most of the bending parameters, will make the Greenbender the dream solution for your precision bendings!
The GB is available in a standard version with a high degree of automation and accessories, but you will always find some other options to make the GB “Your” bending solution!
Available in three standard models ranging from: >> 135 To 220 tons;>> 3 To 4 meters.Pleases check out our list of accessories and options.
Then GB is your machine!
> GREENBENDER press brake, greendynamic
OPERATIVE TECHNOLOGY
GREENDYNAMICSIt refers to a hybrid hydraulic circuit that by using servo pumps avoids the use of a proportional value, producing a much softer, faster and more accurate movement.
BLUEDRIVEAdira provides 3 operative technologies to bending machines. Bluedrive is a full servo electric drive with one or more motors and balls screws. This concept is used on BB range and provides fast bends with big cuts on costs, because, while is idle, the motors stops and don’t consume energy.
CONVENTIONAL SYNCHRONIZED HYDRAULICIt’s a conventional and well proven hydraulic circuit with pump and proportional value. It is an acknowledged, practical and very reliable solution that ADIRA redesign to improve bending machine’s energy consumption and efficiency.
14 15
HEXA-C STRUCTUREAdira revolutionized the market introducing the Hexa-C structure, concept used in the range of the PM, PA, BB and PF, ensuring more precision in bending.
The Hexa-C structure ensures that beams (movable and fixed) remain aligned in any load condition contrary to what occurs in conventional C-structures. Thus, when the resilient structure deforms, the guiding of the beam maintain the vertical position ensuring precision bending.
Main advantages:1.Improved bending accuracy because movable beam remains perfectly aligned with fixed beam (avoid the effect of movable beam rotation typical on conventional C-frames).
2.Largest immunity to structure torsion effects in case of bending not in the centre of the machine.
3.Eliminate the needs of extra devices for reading correction of the movable beam position encoders.
4.Maintaining throat depth on the frames it’s an advantage comparing with H-frames as this feature is important for many applications since it makes simpler the removal of parts, execution of box type and makes things easier for tooling setup.
5.The Hexa C philosophy presents advantages in terms of sturdiness resulting therefore on a lighter frame and, consequently, lower environmental impact.
FRAME DESIGN
H-FRAME In H-frame philosophy the structure of the machine is closed, avoiding deflections and typical torsions of a conventional C structure. This type of frame is used on GB press brake.The principle of active compensation of the deflection is used simultaneously in the upper beam and crowning table, acting over the variable geometry of the structure controlled by CNC, through a close circuit control system.
The precision is achieved through the efficient management of the movement of the fixed beam and effective management of the deflection of the structural components of the machine during the bending process.
The H structure allows a very accurate definition of the deflection, and ensures the effect of beams indefinitely rigid, i.e., with null deflection. That will allow that the tools will be parallel, without de typical curve deformation, and with well distributed strengths, even with off-center loads: conditions to an excellent bending. It permits to operate with accuracy in any part of the table, which allows sequential operations along the table.
