+ All Categories
Home > Documents > Adjustable Timing Pointers - Williams Precision Engines · 433 2007-08 DRAG RACING PARTS AND...

Adjustable Timing Pointers - Williams Precision Engines · 433 2007-08 DRAG RACING PARTS AND...

Date post: 10-Jul-2018
Category:
Upload: doannhan
View: 217 times
Download: 0 times
Share this document with a friend
16
433 2007-08 DRAG RACING PARTS AND ACCESSORIES Dual Gauge Leakdown Tester TAV8015 Tester incorporates an adjustable right-hand gauge, an accurate regulator, and a blue anodized main body. Verify cylinder and head assembly conditions and integrity, and flow test fuel injectors and valves. Includes a stainless steel 14mm fitting, hose assembly for use with most popular engines and instructions. Tapered Ring Compressors The fastest, safest way to install pistons. Extra height accommodates a gradual taper to gently ease rings into the bore, preventing ring breakage. Wide range of sizes to cover most engines. Part No. Size TAV104000 ..... 4.000" TAV104030 ..... 4.030" TAV104040 ..... 4.040" TAV104060 ..... 4.060" TAV104125 ..... 4.125" TAV104155 ..... 4.155" TAV104250 ..... 4.250" TAV104280 ..... 4.280" TAV104310 .... 4.310" Adjustable Tapered Ring Compressors Aluminum hard coat anodized adjustable Ring Compres- sors combine the ease of use of a tapered compressor with the capability of handling up to .090" variance of bore diameters. Superior to sheet metal, band type compressors. Part No. Bore Range TAV8970 ......... 4.000"-4.090" TAV8975 ......... 4.125"-4.215" TAV8980 ......... 4.250"-4.340" Piston Ring Squaring Tools Add a new dimension to efficient, ac- curate, engine assembly. Guaranteed to be flat and parallel within .001" of an inch, each Tool is designed for a specific range of bore sizes and is com- pact enough to fit on a block with head studs installed. Hard coat anodized aluminum. Part No. Bore Range TAV8920 ......... 4.235"-4.290" TAV8925 ......... 4.310"-4.390" TAV8930 ......... 4.430"-4.500" TAV8935 ......... 4.530"-4.630" Rod Bolt Stretch Gauge TAV1400 Measure rod bolts accurately for proper stretch. Handy engine builder’s tool. Complete with steel fixture and premium quality dial indicator. Accurate to within .0005". Dial Bore Gauge TAV9250 Check cylinder bore taper and roundness accurately with Tavia’s Dial Bore Gauge. With a range of 2" to 6" it may also be used for checking rod and main journal bores. Accurate within .0005". Set includes dial indica- tor, eleven anvils and storage case. Dial Indicator Stands And Bases A variety of Indicator Stands and Bases to meet the requirements of professional engine builders. TAV8050 and TAV8052 are used to measure piston dome and deck heights. TAV8057 provides a universal, rigid dial indicator mount, particularly useful when de- greeing camshaft, etc. Precision Dial Indicator (TAV8055) is also available. Part No. Description TAV8050 ......... Indicator Stand, Will Span 4-1/2" Bore TAV8052 ........ Magnetic Indicator Stand, Will Span 4-1/2 " Bore TAV8055 ......... Dial Indicator 1" Travel, .001" Increments TAV8057 ........ Magnetic Indicator Base, 100 Lb. Pull TDC Plate And Stops Exactly locate top dead center during short block as- sembly. Features include a fine adjustment, positive stop and lock nut. Plate is CNC machined (not a stamping), with black oxide finish. Will accommodate up to 1/2" bolts and 4.600" bore. 14mm Stops are used as positive stops through spark plug hole with head installed. Part No. Description TAV8060 ......... TDC Plate And Stop TAV8065 ......... 14mm Stop Crankshaft Sockets And Turning Nuts Rotating the crankshaft during engine assembly is easy with Tavia’s 1/2" square drive Crankshaft Sockets. Made from heat-treated alloy steel and gold iridite plated for maximum corrosion resistance, Crank Turning Nuts slip on to the crankshaft snout before degree wheel is installed to provide a convenient grip for rotating the engine assembly. Part No. Description Crank Sockets TAV8600 ......... SB Chevy V8, 90° V6 TAV8605 ......... BB Chevy V8 TAV8610 ......... Ford, Buick, Olds and Pontiac with 3/16" Keyway TAV8615 ......... Mopar-All V8 Crank Turning Nuts TAV8620 ......... SB Chevy V8, 90° V6 TAV8625 ......... BB Chevy Damper Installation Tool Damper Installation Tool features a multi-piece design with a crank stud that’s a full 7/8" diameter and made from 8740 steel. Thrust bearing eases installation. Part No. Description TAV8200 ......... Damper Installation Tool TAV8250 ......... Damper/Gear Puller Bushing-Protects Crankshaft Snout
Transcript

4332007-08 DRAG RACING PARTS AND ACCESSORIES

Dual Gauge Leakdown Tester TAV8015Tester incorporates an adjustable

right-hand gauge, an accurate regulator, and a blue anodized main body. Verify cylinder and head assembly conditions and integrity, and flow test fuel injectors and valves. Includes a stainless steel 14mm fitting, hose assembly for use with most popular engines and instructions.

Tapered Ring CompressorsThe fastest, safest way to install pistons. Extra height

accommodates a gradual taper to gently ease rings into the bore, preventing ring breakage. Wide range of sizes to cover most engines.Part No. SizeTAV104000 .....4.000"TAV104030 .....4.030"TAV104040 .....4.040"TAV104060 .....4.060"TAV104125 .....4.125"TAV104155 .....4.155"TAV104250 .....4.250"TAV104280 .....4.280"TAV104310 ....4.310"

Adjustable Tapered Ring CompressorsAluminum hard coat anodized adjustable Ring Compres-

sors combine the ease of use of a tapered compressor with the capability of handling up to .090" variance of bore diameters. Superior to sheet metal, band type compressors.Part No. Bore RangeTAV8970 .........4.000"-4.090"TAV8975 .........4.125"-4.215"TAV8980 .........4.250"-4.340"

Piston Ring Squaring ToolsAdd a new dimension to efficient, ac-

curate, engine assembly. Guaranteed to be flat and parallel within .001" of an inch, each Tool is designed for a specific range of bore sizes and is com-pact enough to fit on a block with head studs installed. Hard coat anodized aluminum.Part No. Bore RangeTAV8920 .........4.235"-4.290"TAV8925 .........4.310"-4.390"TAV8930 .........4.430"-4.500"TAV8935 .........4.530"-4.630"

Rod Bolt Stretch Gauge TAV1400Measure rod bolts accurately for proper stretch.

Handy engine builder’s tool. Complete with steel fixture and premium quality dial indicator. Accurate to within .0005".

Dial Bore Gauge TAV9250Check cylinder bore taper and roundness accurately

with Tavia’s Dial Bore Gauge. With a range of 2" to 6" it may also be used for checking rod and main journal bores. Accurate within .0005". Set includes dial indica-tor, eleven anvils and storage case.

Dial Indicator Stands And BasesA variety of Indicator Stands and Bases to

meet the requirements of professional engine builders. TAV8050 and TAV8052 are used to measure piston dome and deck heights. TAV8057 provides a universal, rigid dial indicator mount, particularly useful when de-greeing camshaft, etc. Precision Dial Indicator (TAV8055) is also available.Part No. DescriptionTAV8050 ......... Indicator Stand, Will Span 4-1/2" BoreTAV8052 ........ Magnetic Indicator Stand, Will Span 4-1/2 " BoreTAV8055 ......... Dial Indicator 1" Travel, .001" IncrementsTAV8057 ........ Magnetic Indicator Base, 100 Lb. Pull

TDC Plate And Stops Exactly locate top dead center during short block as-

sembly. Features include a fine adjustment, positive stop and lock nut. Plate is CNC machined (not a stamping), with black oxide finish. Will accommodate up to 1/2" bolts and 4.600" bore. 14mm Stops are used as positive stops through spark plug hole with head installed.Part No. DescriptionTAV8060 .........TDC Plate And StopTAV8065 .........14mm Stop

Crankshaft Sockets And Turning NutsRotating the crankshaft during engine assembly is

easy with Tavia’s 1/2" square drive Crankshaft Sockets. Made from heat-treated alloy steel and gold iridite plated for maximum corrosion resistance, Crank Turning Nuts slip on to the crankshaft snout before degree wheel is installed to provide a convenient grip for rotating the engine assembly.Part No. DescriptionCrank SocketsTAV8600 .........SB Chevy V8, 90° V6TAV8605 .........BB Chevy V8TAV8610 ......... Ford, Buick, Olds and Pontiac with 3/16" KeywayTAV8615 .........Mopar-All V8Crank Turning NutsTAV8620 .........SB Chevy V8, 90° V6TAV8625 .........BB Chevy

Damper Installation ToolDamper Installation Tool features

a multi-piece design with a crank stud that’s a full 7/8" diameter and made from 8740 steel. Thrust bearing eases installation.Part No. DescriptionTAV8200 .........Damper Installation ToolTAV8250 .........Damper/Gear Puller Bushing-Protects Crankshaft Snout

434 2007-08 DRAG RACING PARTS AND ACCESSORIES

Adjustable Timing PointersBlack anodized aluminum Pointers have

up to 4° of adjustment for maximum performance (includes mounting hardware).Part No. DescriptionTAV2335 .........SB Chevy, 6-5/8" Dia. Pro Street/Pro Race BalancerTAV2338 .........BB Chevy, 6-5/8" Dia. Pro Street/Pro Race BalancerTAV2339 .........SB Chevy, 6" Dia. BHJ BalancerTAV2340 .........SB Chevy, 6-3/8" Dia. ATI BalancerTAV2344 .........SB Chevy, 7" Dia. ATI BalancerTAV2348 .........BB Chevy, 7" Dia. ATI BalancerTAV2350 .........SB Chevy, 6-1/4" Dia. Fluidampr BalancerTAV2351 .........SB Chevy, 6-3/8" Dia. Fluidampr “Signature Series” BalancerTAV2353 .........SB Chevy, 6-3/4" Dia. Fluidampr Street BalancerTAV2354 .........SB Chevy, 7-1/4" Dia. Fluidampr BalancerTAV2356 .........SB Chevy, 8" Dia. Fluidampr BalancerTAV2357 .........BB Chevy, 6-1/4" Dia. Fluidampr BalancerTAV2358 .........BB Chevy, 7-1/4" Dia. Fluidampr BalancerTAV2360 .........BB Chevy, 8" Dia. Fluidampr BalancerTAV2373 .........BB Chevy, 6-3/8" Dia. Gen. VI Block, Stock CoverTAV2377 .........BB Chevy, 7" Dia. Gen. VI Block, Stock CoverTAV2378 .........BB Chevy, 7-1/4" Dia. Gen. VI Block, Stock CoverTAV2383 .........SB Chevy, 6-3/8" Dia. Balancer, Bo Laws/Comp Cams 2/3-Pc. CoversTAV2387 .........SB Chevy, 6-3/4" Dia. Balancer, Bo Laws/Comp Cams 2/3-Pc. CoversTAV2388 .........SB Chevy, 7" Dia. Balancer, Bo Laws/Comp Cams 2/3-Pc. Covers

Oil Pump PrimersTavia Oil Pump

Primers feature an exclusive triangular non-slip drive tang and a top align-ment collar. The Chevy primer also includes a bushing to pressurize the lifter galley while priming. Black oxide coated for maximum corrosion resistance.Part No. DescriptionTAV8300 .........Chevy V8 With Collar And BushingTAV8302 ......... Ford 260-351W, 1/4" Hex With Collar

Oil Filter Cutter TAV8340Oil Filter Cutter makes inspection easy.

Filter rotates against free rolling bearings as adjustable shaft pushes against a cutting blade. Cuts filters from 2-1/2" thru 5-1/2" in diameter.

Camshaft Installation Handle TAV8010Hex-shaped non-slip handle simplifies camshaft instal-

lation and prevents damage to cam bearings. Mounting hardware stores inside the handle when not in use. Fits Chevrolet camshafts.

Camshaft ButtonsPrevents forward cam movement in small and

big block Chevy and HD 90° V6 engines with roller camshaft. Machined Buttons are available in two lengths to accommodate any timing chain cover with minimal trimming.Part No. DescriptionTAV2001 ........Cam Button .875" Dia. Flange. Tall, Early Ribbed Cover.TAV2002 ........Cam Button. 875" Dia. Flange. Short, Late Model, Flat Cover

Mini Valve Spring TesterHex-shaped Spring Tester is easy to handle,

and can be used in a vise, arbor or a drill press (with optional chuck flange). All surfaces are anodized or plat-ed. Three ranges, 0-300 psi, 0-600 psi, or 0-1000 psi.Part No. Description Part No. DescriptionTAV8000 .........300 PSI Spring Tester TAV8005 .........Drill Press FlangeTAV8001 ........600 PSI Spring Tester TAV8006 .........Calibration SpringTAV8002 ........1000 PSI Spring Tester

Valve Spring Height MicrometersInstalled in place of the spring the Micrometer’s

threaded members exert pressure as a spring would, for accurate measurement of critical installed heights to .001". Will accommodate double and triple spring retainers. Two ranges available.Part No. DescriptionTAV8890 .........Height Micrometer 1.600" To 1.850"TAV8891 .........Height Micrometer 1.750" To 2.100"

BuretsShatterproof acrylic Burets have a 100cc

capacity with .2cc graduations and a replace-able petcock. Inverted scale provides direct reading of fluid poured. Basic stand measures 24 square inches to provide stability, while the magnetic is an extremely rigid support with 100 lbs. of magnetic pull. Magnetic base is ideal for cc’ing piston domes when using an iron engine block.Part No. DescriptionTAV8700 .........Buret, 100cc With .2cc GraduationsTAV8720 .........Buret Kit With Stand And CC Plate

Cylinder Head DowelsMachined for accurate fit.

Packaged four pieces per card. Black oxide coated.Part No. DescriptionTAV2800 ........Small Block ChevyTAV2810 ........Big Block Chevy (Split Rings)

Extra Long Engine Block Bellhousing DowelsDowels are 5/8" diameter and available in both

straight and offset configurations for GM V8 engines. Locking set screws are included with offset dowels. Dow-els are a full .400" longer to accommodate block protec-tors or rear motor plates. Packaged in sets of two.Part No. DescriptionTAV2700 ........Solid StraightTAV2703 ........Solid .021" OffsetTAV2710 ........Hollow Straight

Illuminated Spark Plug Viewer TAV8080Illuminated Spark Plug Viewer provides 10X

magnification to provide engine tuners with a precise method of “reading” the spark plug electrodes. Deeply shrouded lens eliminates unwanted peripheral glare. Requires two “C” batteries.

4352007-08 DRAG RACING PARTS AND ACCESSORIES

8mm Pro Universal Wire SetsFeatures Include:• 8mm wire has 100% pure silicone insulation, fiberglass reinforced jacket• Double spring locking spark plug terminals provide a firm grip on plugs• Resistor core has 40% less resistance (more fire power) than most resistor conductors• TCW (Tinned Copper Weld) wire core is for racing applications where RFI interference is not a concern

TCW Wire Conductor Resistor CoreDescription Cyl. Black Red Yellow Blue Black Red Yellow Blue

90° Plug Boots 8 TAY70050 TAY70250 TAY70450 TAY70650 TAY70051 TAY70251 TAY70451 TAY70651135° Plug Boots 8 TAY70052 TAY70252 TAY70452 TAY70652 TAY70053 TAY70253 TAY70453 TAY70653180° Plug Boots 8 TAY70054 TAY70254 – TAY70654 TAY70055 TAY70255 TAY70455 TAY70655

Vertex Style 90° Plug Boots* 8 – – – TAY70660 – – – –*Vertex style sets have extra long leads for use with OAC/OXC magnetos.

8mm Spiro-Pro Universal Wire SetsFeatures Include:• Applications for small and big block Chevy• Provides up to 10 times less resistance than standard resistor core wire• A must for electronic ignitions, on-board computers and pit radios• 100% silicone inner and outer jacket provides heat protection up to 600°F• Taylor Pro boots feature low profile silicone boots with grips• Double spring locking spark plug terminalsDescription Cyl. Black Purple Red Yellow Blue Hot Teal Hot Orange Hot Lime Hot Pink90° Boots 8 TAY73051 TAY73151 TAY73251 TAY73451 TAY73651 TAY78851 TAY78351 TAY78551 TAY78751135° Boots 8 TAY73053 TAY73153 TAY73253 TAY73453 TAY73653 TAY78853 TAY78353 TAY78553 TAY78753180° Boots 8 TAY73055 TAY73155 TAY73255 TAY73455 TAY73655 TAY78855 TAY78355 TAY78555 –180° Hemi 8 TAY75089 – TAY75289 – TAY75689 – – – –

8mm Spiro-Pro Custom Race-Fit Wire SetsFeatures Include:• Provides up to 10 times less resistance than standard resistor core wire• A must for electronic ignitions, on board computers and pit radios• 100% silicone inner and outer jacket provides heat protection up to 600°F• Taylor Pro boots feature low profile silicone boots with grips• Double spring locking spark plug terminals

TCW Wire Core Spiro-Pro WireApplication Distributor Type Plug Boot Black Red Blue Black Red Blue

SB Chevy, Over Valve Cover Socket 90° TAY76037 – – TAY76027 TAY76227 TAY76627SB Chevy, Over Valve Cover HEI 90° TAY76038 TAY76238 TAY76638 TAY76028 TAY76228 TAY76628SB Chevy, Under Headers Socket 90° TAY76039 – TAY76639 TAY76029 TAY76229 TAY76629SB Chevy, Under Headers HEI 90° TAY76040 TAY76240 TAY76640 TAY76030 TAY76230 TAY76630

BB Chevy, Over Valve Cover HEI 135° – TAY76242 – – – TAY76632

Thundervolt 8.2mm Universal Wire SetsFeatures Include:• Wire measures just 50 ohms per foot of resistance• Ferrite, spiral-wound copper/nickel alloy core• Three-layer Zimplex silicone outer jacket• Tightly woven heat treated fiberglass braid

Description Cyl. Black Red Blue90° Plug Boots 8 TAY83051 TAY83251 TAY83651135° Plug Boots 8 TAY83053 TAY83253 TAY83653180° Plug Boots 8 TAY83055 TAY83255 TAY83655

“409” Pro Race Universal WireFeatures Include:• 3 layers of silicone• .409" (10.4mm) diameter• 600°F of heat protection• No extra sleeving required• Sleeving is extruded directly over 8mm wire• Available in TCW wire core where RFI is not a concern• Also available in Spiro-Wound Conductor for compatibility with multiple-spark ignitions, etc.

TCW Wire Core Spiro-Wound ConductorDescription Cyl. Red Blue Red Blue

90° Plug Boots 8 TAY79250 – TAY79251 TAY79651135° Plug Boots 8 TAY79252 TAY79652 TAY79253 TAY79653180° Plug Boots 8 TAY79254 TAY79654 TAY79255 TAY79655

Vertex Style 90° Plug Boots* 8 – TAY79660 – – *Vertex style sets have extra long leads for use with OAC/OXC magnetos.

436 2007-08 DRAG RACING PARTS AND ACCESSORIES

Clip-On Wire SeparatorsTough nylon Separators withstand tem-

peratures up to 400°F and are available for 7-8mm and 10.4mm spark plug wires. Choice of four colors. Each kit con-tains two 4-wire separators, two 3-wire separators and two 2-wire separators.

Plug Wire Size Black Red Yellow Blue7- 8mm TAY42800 TAY42820 TAY42840 TAY4286010.4mm TAY42809 TAY42829 – TAY42869

Clamp Style Wire SeparatorsSeparates, organizes and supports

ignition wires for a neat, or-ganized job. Molded from non-conductive type 6/6 nylon, Separators will not melt, mar, distort, crack or fade. Available to fit 7-8mm and “409” 10.4mm wire sizes. Choice of three colors. Each kit contains two 4-wire separators, two 3-wire separators and two 2-wire separators.

Plug Wire Size Black Red Blue7-8mm TAY42700 TAY42720 TAY4276010.4mm TAY42709 TAY42729 TAY42769

“T” Clip “409” Wire Separators TAY42609Each Clip separates two “409” Pro

Race Wires in tight-fit areas for neat, tangle-free routing. Four clips per package. Easy installation.

Spark Plug Boot ProtectorsUniversal fit Plug Boot Protectors are 6 inches

long and withstand temperatures up to 1200°F.Description 1 Per Pkg. Part No. 8 Per Pkg. Part No.

Silver TAY2523 TAY2524Red – TAY2562

Yellow – TAY2564

Red Heat Sleeving TAY2525Heat Sleeving fits over 7mm and

8mm plug wires for heat and abra-sion protection. Withstands up to 500°F and is packaged in a 25 ft. roll.

Spark Plug Wire Removal Tool TAY43392Tool has insulated handle and will not

damage spark plug wires.

Multi-Purpose Tool TAY43390Multi-Purpose Tool will cut, strip and

crimp all popular primary wire. Made of high-carbon steel, it will crimp both 7mm and 8mm spark plug wire ends. The plastic hand grips are non-conductive/non-slip and the tool is finished in rust-resistant black.

Professional Crimp ToolTool uses a positive ratcheting system to produce fac-

tory quality crimps on spark plug wire terminals. Crimp dies may be purchased separately and used to cut and crimp traditional wire terminals, removing just the right amount of wire insulation without damaging the wire conductor.Part No. DescriptionTAY43400 .......Professional Crimp ToolTAY43401 .......Crimp Die, Cuts 10-22 Gauge Insulated TerminalsTAY43402 .......Crimp Die, Cuts 10-22 Gauge Non-Insulated Terminals

Aluminum Battery BoxA battery box is required by NHRA/IHRA when there

is no firewall between the driver compartment and the battery. This .040" aluminum Box fits most battery sizes, meets SFI 8.1 specs and includes hold down, 3/8" hold down bolts and hardware. Part No. DescriptionTAY48100 .......Battery Box TAY48101 .......Battery Box And 16', 2 Gauge Cable Kit

Trunk Mount Battery KitsA trunk mounted battery will im-

prove weight distribution and trac-tion while reducing front end weight and engine clutter. Kits include pre-terminated ends, 2 gauge, 100% solid copper cable, bat-tery tray(s), 3/8" J-bolt hold downs and hardware. Single or side-by-side, dual battery kits are available.Part No. DescriptionTAY48000 .......Single Battery Kit (16' Cable, Single Battery Tray And Hold Down)TAY48500 .......Side-By-Side Dual Mount Kit (17' Cable, Two Battery Trays And

Hold Downs)

Master Disconnect Switch TAY1032Two-post Switch is rated at 180 amp con-

tinuous capacity and provides a direct power shut-off for entire electrical system. Required by NHRA/IHRA on any car quicker than 9.99 E.T. and all cars with trunk mounted battery.

Professional Racing Overhead Switch Panel Compact, functional Switch

Panel mounts on roll cage. Panel is 8-1/4" long and includes heavy duty switches for ignition, starter and fuel pump; progressive switches for cooling or lights and auxiliary. All circuits are fused. Part No. DescriptionTAY1042 .........Professional Racing Overhead Switch PanelTAY1044 .........Universal Switch Panel Wiring Harness, 20'

TAY48500

4372007-08 DRAG RACING PARTS AND ACCESSORIES

See-Thru Mesh Window NetsDurable, lightweight polyester

Mesh Nets increase vision and stop small debris better than ribbon or string nets. Meet SFI 27.1 specs. 22" x 18"Part No. Color Part No. ColorTEA3000 .........Green TEA3003 .........BlueTEA3001 .........Red TEA3007 .........YellowTEA3002 .........Black

Ribbon Window NetsRibbon-style Window Nets are made

with 1" wide heavy duty polypro web-bing. Nets measure 18" x 24" and meet SFI 27.1 specs.Part No. Color Part No. ColorTEA7001 .........Black TEA7006 .........SilverTEA7002 .........Red TEA7007 .........PurpleTEA7003 .........Blue TEA7008 .........OrangeTEA7004 .........Yellow TEA7009 .........GreenTEA7005 .........White

Ram Pac™ Driver HarnessRotary buckle 5-point bolt-in Harness

combines sternum strap, chest and pelvic pads for decreased lateral and forward movement. Full body padding allows maximum tightness without dis-comfort. Rapidly dissipates high impact energy normally concentrated at the neck, collar bone and pelvic regions. Improves concentration and reduces fatigue. Release tabs and pull loops for easy release and positive adjustments of harness straps are included. Meets SFI 16.1 specifications.Part No. DescriptionTEA6000113 ...Harness With Black Belts, Black Harness and Red TrimTEA6000221 ...Harness With Blue Belts, Blue Harness and Black TrimTEA6000331 ...Harness With Red Belts, Red Harness and Black TrimNote: Custom color options are available on special order basis.

Exhaust Insulating WrapTurn exhaust heat into a winning edge. Exhaust Wrap

reduces under hood temperatures up to 70% by keeping the heat in the exhaust pipes where it can increase scav-enging, horsepower and torque. Choose Standard, Black Graphite or new Generation II Hi-Heat Copper, with up to 30% more heat resistance. Secure with stainless steel Snap Straps (available separately) or hose clamps.

Description Standard Black Graphite Hi-Heat Copper1" x 1/16" x 50' THE11001 THE11021 THE110312" x 1/16" x 50' THE11002 THE11022 THE110322" x 1/16" x 100' THE11003 THE11023 –1" x 1/16" x 15' THE11151 THE11053 –2" x 1/16" x 15' THE11152 THE11054 –

Snap StrapsStraps secure exhaust insulating wrap, but

may be used for other purposes as well. Snap Straps fit in tight spots. Lengths of 9" or 18" with multi-locks attached.Part No. Description THE13101 ......V8 Kit, Includes (8) 9" Straps, (4) 18" StrapsTHE13150 ......12-Pack Kit, Twelve 9" StrapsTHE13160 ......6-Pack Kit, Six 18" Straps

Hi-Heat CoatingSpecially formulated Coating protects and colors

header wrap. Prevents damage from fluids and flying debris. Withstands heat up to 1500°F. Works great on other high temperature applica-tions also.Part No. ColorTHE12001 ......BlackTHE12002 ......AluminumTHE12003 ......Copper New!

Thermo-SleeveThermo-Sleeve protects pipes,

hoses and wires from radiant heat up to 2,000°F. Sold in 3 ft. rolls.Part No. DescriptionTHE14005 ......1/4" to 1/2", 3 Ft. LengthTHE14006 ......1/4" to 1/2", 12 Ft. Length THE14010 ......5/8" to 1", 3 Ft. LengthTHE14011 ......5/8" to 1", 12 Ft. LengthTHE14015 ......1-1/8" to 1-1/2", 3 Ft. LengthTHE14020 ......1-5/8" to 2", 3 Ft. LengthTHE14025 ......2-1/8" to 2-1/2", 3 Ft. Length

Thermo-Shield Tape THE14002Handy, aluminized adhesive Tape has

many uses. Wrap fuel lines to prevent vapor lock. Protect expensive engine parts from damage resulting from radiant heat. Tape forms a firm, neat covering like a bandage, and the bright metallic surface reflects heat. 1-1/2" x 15' long roll.

Starter Heat Shield THE14150Easy to install kit wraps starter

and solenoid to reflect radiant heat. Secures with fasteners provided. Measures 7" x 22".

Ground Shipment

Only

438 2007-08 DRAG RACING PARTS AND ACCESSORIES

Single-Stage “Billet Atomizer” Plate Systems For Holley/Demon 4BBL. Carbureted ApplicationsUp To 400 Horsepower!Completely adjustable Systems

have “freeze-free” spray bars with clustered discharge holes for improved air/fuel atomization and superior distribution. Three Sys-tems with graduated power levels are available and each requires an aftermarket fuel pump. Sys-tems include 1/2" spray plates, solenoids, jets, filters, stainless nitrous lines, 10 lb. bottles, hardware and instructions.Part No. DescriptionTNW10010 .....Adjustable From 75-200 HP, Single-Stage 10000 Series SystemTNW11010 .....Adjustable From 125-300 HP, Single-Stage 11000 Series SystemTNW12010 .....Adjustable From 150-400 HP, Single-Stage 12000 Series System

Ford 4.6/5.0L System TNW13007Up To 100 Horsepower!Power Wing kit for ’94-up Ford

4.6/5.0L Mustangs adds up to 100 horsepower. Adjustable, “wet” system installs in the air inlet to precisely meter fuel and nitrous ahead of the mass air sensor. Compatible with stock engine components and does not require a fuel system upgrade. Kit includes nozzle, calibrated jets, solenoids, filter, stainless steel nitrous line, 10 lb. bottle, instruc-tions and hardware.

Ford EFI Plate SystemsUp To 175 Horsepower!A bolt-on Systems for stock

or mildly modified ’86-93 5.0L Mustangs with original equip-ment fuel injection. Compatible with stock and most aftermar-ket intake and fuel injection upgrades. Choose standard or adjustable power level versions. Standard system provides up to 125 horse-power. Adjustable system delivers from 50-175 horse-power and requires fuel system upgrade. 70mm spray plates, solenoids, filters, stainless steel nitrous lines, 10 lb. bottles and hardware are included. Part No. DescriptionTNW13005 .....Adjustable Plate System, ’86-93 Ford Mustang 5.0L EFI TNW13020 .....Standard Plate System, ’86-93 Ford Mustang 5.0L EFI

GM LT-1 Plate System TNW13070Up To 175 Horsepower!Add up to 175 horsepower to any stock or mildly

modified ’93-97 LT-1 350 “F” body (Camaro/Firebird), Corvette or Impala SS. System includes spray plate, cali-brated jets, solenoids, filter, stainless steel nitrous line, 10 lb. bottle and hardware.

GM LS1 System TNW13075Up To 125 Horsepower!Add up to 125 horsepower to

’97-up Corvette and ’98-up Camaro/Firebird with LS1 engine. Adjustable System uses a single nozzle to inject fuel and nitrous directly into the intake tract. Compatible with stock engine components and does not require a fuel system upgrade. Includes Power Wing nozzle, cali-brated jets, solenoids, filter, stainless steel nitrous line, 10 lb. bottle, instructions and hardware.

EFI Power Wing Universal Nozzle Kit TNW13080Up To 100 Horsepower!May be easily adapted to a

wide variety of EFI applications to quickly provide up to 100 horsepower. Single nozzle may be installed anywhere in the intake tract before the plenum chamber. Compatible with natu-rally aspirated or turbocharged vehicles. Kit includes nozzle, jets, solenoids, stainless line, 10 lb. bottle, fittings, hardware and instructions.

Nitrous System AccessoriesPart No. DescriptionTNW16021 ..... IHRA Pop-Off Valve, -8AN FemaleTNW16022 .....Nitrous Safety Vent TubeTNW16024 ..... IHRA Pop-Off Valve, 1/4"NPT MaleTNW19006 ..... -4AN Purge SystemTNW19012 ..... -6AN Purge System

Nitrous Pressure GaugesNitrous Pressure Gauges read 0-1,500 PSI.

DescriptionGauge And

Adapter Gauge Only Adapter OnlyNitrous Pressure, -4AN In-line Adapter TNW16005 TNW16025 TNW22016Nitrous Pressure, -6AN In-line Adapter TNW16013 TNW16025 TNW22017

Replacement Nitrous System Solenoids

Description Nitrous Solenoid Fuel SolenoidSportsman TNW19001 TNW19002

Pro TNW19003 TNW19004

TNW19006

Bob Flowers Photo By Caswell Photography

4392007-08 DRAG RACING PARTS AND ACCESSORIES

Standard And Severe Duty Super Starters

The starter choice of winning racers since 1981. The 3.75:1 gear reduc-tion ratio produces 50% more torque than original equipment units, weighs just 11 pounds, and is 35% smaller for more oil pan and header clear-ance. All electrical connections are siliconed and the armature is epoxy encapsulated. Gaskets and seals are used throughout for corrosion protection. The Severe Duty Super Starter is recommended for 450 cu. in. or larger, high compression engines. Severe Duty starters have 43% more cranking power, are 1" longer and 1 lb. heavier than Standard Duty models.Application Standard Duty Severe DutyChevrolet V8 TIL54-10001 TIL54-20001SB Chrysler 273-360 TIL54-10000 –SB Ford, “FE” TIL54-10013 TIL54-20013SB Ford, Man. Trans.,To ’67, .270" Offset TIL54-10018 –BB Ford 429-460 TIL54-10014 TIL54-20014GM Corporate Big Block, LH Mount – TIL54-20041Oldsmobile 350-455, ’66-Up TIL54-10031 –Pontiac 350-455 TIL54-10021 –

Super Starter Replacement PartsPart No. Description TIL54-021 ......Starter Drive, Most With 9-Tooth 12/14 Pitch Pinion, Most Ford/GMTIL54-022 ......Solenoid, Fits Most Standard Duty StartersTIL54-042 ......Pinion Gear For Starter Drive 54-021, Most Ford/GMTIL54-906 ......Complete Spring KitTIL54-950 ......Starter Accessory Pack, Includes Bolts And ShimsTIL54-952 ......Starter Shim Kit

Chevy XLT Super Starter TIL54-50001Compact XLT Su-

per Starter for small block Chevy 153-tooth flywheel adds header and oil pan clearance and weighs only 7 lbs. - 30% lighter than the original Super Starters. With a 1.6 horsepower motor, it will quickly start a 400 cubic inch engine with 10.5:1 compression ratio.

Electric Fluid Pump TIL40-524Pump is efficient, compact,

and very effective for circulating transmission fluid through a cooler with the engine off. Compatible with most oils, fluids or water, Pump weighs just 3-1/2 lbs., features an internal bypass and two 3/8"NPT ports. Displaces 1-2 gallons per minute.

74-Series Long Master Cylinder KitsUniversal Kits have side or flange mount capability, easy

interchange of remote reservoir, and a mounting bracket that adapts large or small reservoir to remote mount. Each Master Cylinder (5.6" long) Kit includes lightweight alumi-num master cylinder featuring dual fluid outlets and bleed screws, small (4.0 oz.) and large (10.7 oz.) reservoirs, remote reservoir mount kit, 3/16" inverted flare and -3AN adapter fittings. Outlet size is -3AN, 3/8"-24 thread.

DescriptionUniversal

Master Cyl. KitMaster Cylinder

OnlyRebuild

Kit5/8" Bore Master Cylinder TIL74-625U – TIL74-625RK7/10" Bore Master Cylinder TIL74-700U – TIL74-700RK3/4" Bore Master Cylinder TIL74-750U TIL74-750 TIL74-750RK

13/16" Bore Master Cylinder TIL74-812U – TIL74-812RK7/8" Bore Master Cylinder TIL74-875U TIL74-875 TIL74-875RK

15/16" Bore Master Cylinder TIL74-937U – TIL74-937RK1" Bore Master Cylinder TIL74-1000U TIL74-1000 TIL74-1000RK

1-1/8" Bore Master Cylinder TIL74-1125U – TIL74-1125RK

75-Series Short Master Cylinder KitsKits have many of the same features as the 74 series,

but with a shorter body length (3.2") for mounting in tight areas. Each Kit includes a black anodized, light-weight aluminum master cylin-der with -3AN outlet ports, small (4.0 oz.) and me-dium (6.8 oz.) reservoirs, remote reservoir mounting kit and fittings. Outlet size is -3AN, 3/8"-24 thread.

Description Universal Master Cyl. Kit Rebuild Kit5/8" Bore Master Cylinder TIL75-625U TIL75-625RK7/10" Bore Master Cylinder TIL75-700U TIL75-700RK3/4" Bore Master Cylinder TIL75-750U TIL75-750RK

13/16" Bore Master Cylinder TIL75-812U TIL75-812RK7/8" Bore Master Cylinder TIL75-875U TIL75-875RK

15/16" Bore Master Cylinder TIL75-937U TIL75-937RK1" Bore Master Cylinder TIL75-1000U TIL75-1000RK

1-1/8" Bore Master Cylinder TIL75-1125U TIL75-1125RK

Master Cylinder Replacement Parts For 74 And 75 SeriesTilton Brake offers quality replacement

master cylinder components.Part No. DescriptionTIL73-815-3L ......... -3AN Male UnionTIL74-200 .............. Inlet FittingTIL74-202 .............. Small Reservoir (4.0 Oz.)TIL74-204 .............. Large Reservoir (10.7 Oz.) (74 Series Only)TIL74-207 .............. Cap, 4.0, 6.8, And 10.7 Oz. ReservoirTIL74-208 .............. Clamp, EachTIL74-212 .............. Reservoir AdapterTIL74-212-B ........... O-Ring For Master Cylinder (74 Series Only)TIL74-214 .............. 30° Rubber HoseTIL74-400 .............. Push Rod (74 Series Only)TILTE2089-188L ..... 3/16" Inverted Flare To -3AN Male Fitting

Brake Fluid Bleed Kit TIL72-503Kit makes quick work of brake system

bleeding and has two 1/2 Liter bleeding bottles, two lengths of hose, and instruc-tions. “No mess” method allows one person to bleed two calipers at the same time.

440 2007-08 DRAG RACING PARTS AND ACCESSORIES

TR-1 Racing Oils With MPZMPZ Oils reduce friction, wear and deposits for longer

engine life, and are formulated for all 4, 6 and 8 cyl-inder high performance engines. Lightweight 10W40 and 20W50 oils add 8 to 12 more horsepower and up to 40% more wear protection than other oils of equal viscosity. The 50W Oil delivers maximum wear protection for prolonged high temperature operation. Grade 60W provides thicker oil films to seal rings and prevent fuel and compression loss in supercharged engines that burn alcohol and nitromethane. Sold in 1 qt. bottles.Part No. DescriptionTRC141040 ....10W40TRC142050 ....20W50TRC140050 ....50WTRC140060 ....60W

SR-5 Synthetic Racing Oils With MPZSR-5 Racing Oils are formulated with a balanced blend

of high performance additives including liquid moly, phos-phorus and zinc to provide superior protection from friction, wear and extreme pressure. Ex-tends engine life, MPZ Synthetic Racing Oils will withstand tremendous heat and provide a thick protective oil film on bearings, crank-shafts, pistons and valve train parts.Part No. DescriptionTRC150530 ....5W30TRC150540 ....5W40TRC152050 ....20W50

SR-1 Synthetic Blend Motor OilsA selective cross blend of advanced 100% synthetic

base oils incorporating Generation-2 MPZ frictional loss technology and proprietary additives for maximum power, efficiency and wear protection. For stock, tuned or modified street engines, SR-1 delivers increased horsepower and torque, while reducing operating tempera-tures. One liter bottles.Part No. Description Part No. DescriptionTRC160520 ....5W20 TRC161040 ..... 10W40TRC160530 ....5W30 TRC162050 ..... 20W50TRC161030 ....10W30

TR-4 Synthetic Blend Racing Oil With MPZA petroleum base blended with synthetic

bases and special polymers, TR-4 will flow freely in cold engines and maintain a consistent film when hot to improve ring seal, reduce valve spring wear and increase engine life. One liter bottle.Part No. DescriptionTRC172050 ....20W50TRC172560 ....25W60

MPZ Magnetic Friction Reducer TRC010011Magnetic Friction Reducer oil additive with

MPZ provides excellent wear protection and helps increase horsepower and torque.

RTF Racing Transmission Fluid TRC220015Formulated to reduce fluid drag for

increased power without compromising durability. RTF is manufactured from 100% synthetic bases for superior shear resistance and extreme pressure wear protection. Exceeds the load-carrying properties of higher viscosity GL-5 or GL-6 gear oils and is recommended for manual transmissions and transaxles where an SAE 75W90, 80W90 or 90W is specified. One liter bottle.

ATF Synthetic Automatic Transmission Fluid TRC220088A synthetic blend that resists oxidation,

thermal breakdown, foaming, corrosion and wear. ATF is specially formulated for rac-ing and high transmission temperatures. ATF also reduces fluid friction for smoother clutch lock-up, and more power efficiency.

MTF Petroleum Base Manual Transmission Fluid TRC200022A low viscosity petroleum based fluid for

manual transmissions. Recommended for use in Lenco transmissions. Provides reduced gear and bearing wear, reduced frictional drag and smoother shifting.

RGO Racing Gear OilsTorco Racing Gear Oils provide superior

adhesive strength and extreme anti-score protection. Unique additives prevent wear and reduce heat, friction and noise, while providing positive operation of limited slip and positive traction differentials.Part No. Description Part No. DescriptionTRC248090 ....80W90 TRC248514 ..... 85W140

SGO Synthetic Racing Gear OilsTorco Synthetic Hypoid Gear Oils provide

maximum protection and performance under the most demanding conditions. Gear oils exceed all hypoid requirements for wear protection while reducing friction and gear box temperatures.Part No. Description Part No. DescriptionTRC257514 ....75W140 TRC257590 ..... 75W90

MPZ Engine Assembly LubeFormulated to “stay in place” on all engine parts,

MPZ is a concentrate of oil soluble molybdenum, phosphorus and zinc, fortified with polymers and a high polarity phosphorous to create a magnetic attraction to metal. Use MPZ to pre-lube cylinders, pistons, wrist pins, cams, lifters and valvetrain components.Part No. Description Part No. DescriptionTRC550055 ....1 Oz. TRC550055K ... 12 Oz.TRC550055J ...4 Oz.

4412007-08 DRAG RACING PARTS AND ACCESSORIES

Maxseal Gapless Top Ring File-Fit Piston Ring SetsIndependent dyno tests proved that the Total Seal Gap-

less Top Ring Sets can deliver more horsepower and torque than conventional piston rings. Eight cylinder, file-fit ring sets include Max Seal Gapless top rings, conven-tional second rings and standard or special, low tension oil rings. Low tension ring sets deliver a 25% reduction in tension when compared to standard oil rings. Instruc-tions for file-fitting included.

Bore SizeGapless Top Ring

Conventional Second Ring 3-Pc. Oil Ring Ring Set Part No.

3.815" 1/16" 1/16" 3/16" (Low) TOTML7255-354.020" 1/16" 1/16" 3/16" TOTM3690-254.030" 1/16" 1/16" 3/16" TOTM3690-354.030" 1/16" 1/16" 3/16" (Low) TOTML3690-354.030" .043" 1/16" 3/16" TOTM4300-354.040" 1/16" 1/16" 3/16" TOTM3690-454.040" 1/16" 1/16" 3/16" (Low) TOTML3690-454.040" 1/16" 1/16" 3/16" TOTM7590-454.060" .043" 1/16" 3/16" TOTM4300-654.060" 1/16" 1/16" 3/16" TOTM3690-654.125" 1/16" 1/16" 3/16" TOTM0690-54.130" 1/16" 1/16" 3/16" TOTM7560-54.155" 1/16" 1/16" 3/16" TOTM0690-354.155" 1/16" 1/16" 3/16" (Low) TOTML0690-354.165" 1/16" 1/16" 3/16" TOTM0690-454.165" .043" 1/16" 3/16" TOTM4301-454.285" 1/16" 1/16" 3/16" TOTM9190-354.315" 1/16" 1/16" 3/16" TOTM9190-654.315" 1/16" 1/16" 3/16" (Low) TOTML9190-654.355" 1/16" 1/16" 3/16" TOTM9190-1054.380" 1/16" 1/16" 3/16" TOTM9190-1304.505" 1/16" 1/16" 3/16" TOTM9190-2554.505" 1/16" 1/16" 3/16" (Low) TOTML9190-2554.535" 1/16" 1/16" 3/16" TOTM9190-2854.567" 1/16" 1/16" 3/16" TOTM9130-5

Note: Piston ring sets with low tension oil rings are for drag racing only!

Xtreme File-Fit Piston Ring SetsHigh compression ratios, heavy doses of nitrous oxide,

and high supercharger or turbocharger boost pressures place pistons and rings under tremendous loads and intense heat calling for the Xtreme Piston Ring Set. Set includes severe duty top rings, gapless second rings, and three-piece standard tension oil rings. Complete instructions for file-fitting included. All sets listed are for eight cylinder engines.

Bore SizeSevere Duty

Top RingGapless

Second Ring 3-Pc. Oil Ring Ring Set Part No.4.035" 1/16" 1/16" 3/16" TOTTT3690-354.065" 1/16" 1/16" 3/16" TOTTT3690-654.130" 1/16" 1/16" 3/16" TOTTT0690-54.160" 1/16" 1/16" 3/16" TOTTT0690-354.285" 1/16" 1/16" 3/16" TOTTT9190-354.315" 1/16" 1/16" 3/16" TOTTT9190-65

Classic Race Standard Gap And File-Fit Piston Ring SetsInstead of the gap-

less top or second ring, Classic Race Piston Ring Sets include conventional top and second rings. Sets are ideal for naturally aspirated, supercharged, turbocharged or conservative nitrous-assisted engines. Sets include Moly Max ductile iron top rings, conventional second rings, and three-piece, standard tension oil rings. Choose “drop-in”, Standard Gap or File-Fit sets. All sets are for eight cylinders.

Bore SizeDuctile Iron Top Ring

Conventional Second Ring

3-Pc. Oil Ring

Set Type

Ring Set Part No.

4.030" 1/16" 1/16" 3/16" Standard Gap TOTCR3690-304.030" 5/64" 5/64" 3/16" File-Fit TOTCR9090-354.060" 1/16" 1/16" 3/16" Standard Gap TOTCR3690-604.395" 1/16" 1/16" 3/16" File-Fit TOTCR2690-35

Ring Set Description Top Ring Second Ring Oil Ring Typical ApplicationsTS1 Gapless 2nd Rings Ductile Iron Gapless Standard Three-Piece Street, Race, Mild Nitrous/Forced Induction

Maxseal Gapless Top Rings Ductile Iron Gapless Conventional Standard Three-Piece Street, Race, Mild Nitrous/Forced InductionXtreme Gapless 2nd Rings Severe Duty Gapless Standard Three-Piece Street, Race, Nitrous, Forced Induction

Gapless Top or Second Ring?The Maxseal Gapless top ring is a design progression of

the Gapless second ring. Installing a gapless ring in the top rather than the second groove of the piston effectively seals the combustion chamber improving compression and power strokes. The increased amount of force trans-mits a greater amount of energy to the crankshaft.

Low Tension Oil RingsAll Total Seal piston ring sets are available with low ten-

sion oil rings. Low tension oil rings offer approximately a 25% reduction in tension compared to standard oil rings. Gold Power low tension oil rings offer approximately a 40% reduction. While low tension oil rings can translate into a significant increase in horsepower, an oil ring package with insufficient tension for the particular application can result in combustion chamber contamination, spark plug fouling and ultimately, detonation. Low tension oil rings are not recommended for nitrous or supercharged engines and should never be used on street-driven vehicles. Brook Nellis Photo By Caswell Photography

Total Seal Piston Ring SetsTotal Seal Piston Ring Sets

442 2007-08 DRAG RACING PARTS AND ACCESSORIES

TS1 Gapless Second Ring File-Fit Piston Ring Sets TS1, eight cylinder Sets are available with conventional

ductile iron top rings, gapless second rings, and stan-dard, low tension, or Gold Power low tension oil rings. Low tension oil rings have 25% less tension than stan-dard tension rings while Gold power oil rings offer a 40% reduction. Complete instructions for file-fitting included.

Bore SizeDuctile Iron

Top RingGapless

Second Ring 3-Pc. Oil Ring Ring Set Part No.3.815" 1/16" 1/16" 3/16" (Low) TOTTL7255-353.825" 1/16" 1/16" 3/16" (Low) TOTTL7255-454.000" 1/16" 1/16" 1/8" TOTT0390-54.000" 1/16" 1/16" 3/16" TOTT3690-54.000" 1.5mm 1.5mm 4mm TOTT6434-54.020" 1/16" 1/16" 3/16" TOTT3690-254.020" 1/16" 1/16" 3/16" (Gold Power) TOTTG3690-254.030" 5/64" 5/64" 3/16" TOTT9090-354.030" 1/16" 1/16" 3/16" TOTT3690-354.030" 1/16" 1/16" 3/16" (Gold Power) TOTTG3690-354.030" 1/16" 1/16" 1/8" TOTT0390-354.030" 1/16" 1/16" 3mm (Low) TOTT1001-354.030" .043" .043" 3mm (Low) TOTTL0010-354.040" 5/64" 5/64" 3/16" TOTT9090-454.040" 1/16" 1/16" 3/16" TOTT3690-454.040" 1/16" 1/16" 3/16" (Gold Power) TOTTG3690-454.040" .043" .043" 3mm (Low) TOTTL0010-454.060" 1/16" 1/16" 3/16" TOTT3690-654.060" 1/16" 1/16" 3/16" (Gold Power) TOTTG3690-654.125" 1/16" 1/16" 3/16" TOTT0690-54.125" 1/16" 1/16" 3/16" (Gold Power) TOTTG0690-54.125" .043" .043" 3mm (Low) TOTTL0010-1304.135" 1/16" 1/16" 3/16" TOTT0690-154.145" 1/16" 1/16" 3/16" TOTT0690-254.145" 1/16" 1/16" 3/16" (Gold Power) TOTTG0690-254.155" 1/16" 1/16" 3/16" TOTT0690-354.155" 1/16" 1/16" 3/16" (Gold Power) TOTTG0690-354.155" 1/16" 1/16" 1/8" TOTT1003-354.155" .043" .043" 3mm (Low) TOTTL9010-354.165" 1/16" 1/16" 3/16" TOTT0690-454.165" 1/16" 1/16" 3/16" (Gold Power) TOTTG0690-454.165" 1/16" 1/16" 1/8" TOTT1003-454.285" 1/16" 1/16" 3/16" TOTT9190-354.285" 1/16" 1/16" 3/16" (Gold Power) TOTTG9190-354.315" 1/16" 1/16" 3/16" TOTT9190-654.315" 1/16" 1/16" 3/16" (Gold Power) TOTTG9190-654.355" 1/16" 1/16" 3/16" TOTT6490-354.395" 5/64" 5/64" 3/16" TOTT8950-354.425" 1/16" 1/16" 3/16" TOTT2690-654.445" 1/16" 1/16" 3/16" TOTT9190-1954.475" 1/16" 1/16" 3/16" TOTT9190-2254.505" 1/16" 1/16" 3/16" TOTT9190-2554.535" 1/16" 1/16" 3/16" TOTT9190-2854.567" 1/16" 1/16" 3/16" TOTT9130-54.605" 1/16" 1/16" 3/16" (Low) TOTTL9150-54.630" 1/16" 1/16" 3/16" TOTTR3340-5

Note: Sets with low tension or Gold Power low tension oil rings are for drag racing only!

TS1 Gapless Second Ring Standard Gap Piston Ring SetsThe same TS1 piston ring sets, but file-fitting is not

required. Eight cylinder sets include conventional ductile iron top rings, gapless second rings and standard ten-sion oil rings.

Bore SizeDuctile Iron

Top RingGapless

Second Ring 3-Pc. Oil Ring Ring Set Part No.4.000" 1/16" 1/16" 3/16" TOTT3690-54.000" 1.5mm 1.5mm 4mm TOTT6434-54.030" 1/16" 1/16" 3/16" TOTT3690-304.155" 1/16" 1/16" 3/16" TOTT0690-304.165" 1/16" 1/16" 3/16" TOTT0690-404.280" 1/16" 1/16" 3/16" TOTT9190-304.380" 1/16" 1/16" 3/16" TOTT6490-60

TSS Gapless Second Ring Standard Gap Piston Ring SetsEconomically

priced and engineered for mild drag race or street engines with 10.5:1 or lower compression ratios. Eight cylinder Sets include cast iron conventional top rings, Gapless second rings and three-piece, standard tension oil rings. TSS Sets listed do not require file-fitting and should NOT be used with nitrous oxide or forced air induction.

Bore SizeCast Iron Top Ring

Gapless Second Ring 3-Pc. Oil Ring Ring Set Part No.

4.000" 5/64" 5/64" 3/16" TOTS90904.030" 5/64" 5/64" 3/16" TOTS9090-304.040" 5/64" 5/64" 3/16" TOTS9090-404.092" 5/64" 5/64" 3/16" TOTS9360-304.155" 5/64" 5/64" 3/16" TOTS0190-304.280" 5/64" 5/64" 3/16" TOTS2090-30

QuickSeat TOTQSA dry film powder, QuickSeat aids piston

ring seating. Sold in two gram containers.

Assembly Lubricant TOTAL4Engineered by Total Seal to deliver proper lubri-

cation during initial start-up and break-in. AL4 burns off quickly after start-up and leaves no residue. May be used alone or with Quickseat. Sold in 4 oz. bottle.

Dual Gauge Leakdown Tester TOT14MMLDTPeriodically check critical

piston ring, valve and head gasket seal. Dual Gauge Tester includes an ad-justable air pressure regulator and large, easy-to-read gauges. 14mm hose included. Dana Fitzpatrick Photo By Caswell Photography

4432007-08 DRAG RACING PARTS AND ACCESSORIES

Racing And Street/Strip TransmissionsEach TSI Transmission is

thoroughly rebuilt using only the best compo-nents. The Pro-Line 2000 Powerglide is fitted with a stock pan, alloy input shaft, heavy duty clutch hub, and is built for the drag car with a trans-brake and up to 650 horsepower. Street/Strip Turbo 350 Transmissions are remanufactured and modified for durability and quick, crisp shifts, but still retain automatic shifting for street use.Part No. DescriptionTSI2512-2000 ...Pro-Line 2000 Powerglide, Trans-Brake, Stock PanTSI35001 ........Street/Strip TH-350 Chevrolet, 6" Tail Housing

Powerglide ComponentsPart No. DescriptionTSI2518 ..... Uni-Length 4340 Steel Input Shaft, 1.76 Or 1.82 Carrier, Powerglide SplineTSI2519 ..... Uni-Length 4340 Steel Input Shaft, 1.76 Or 1.82 Carrier, Turbo SplineTSI2520 ..... Uni-Length 4340 Steel Input Shaft, 1.76 Or 1.82 Carrier, Turbo Spline,

High FlowTSI2540S ... 1.80 Straight Cut “Shorty” Planetary Gear SetTSI2541A ... Dual Ring Servo Piston, Prevents Rocking During Trans-Brake ApplyTSI2543A ... High Gear Clutch Hub, Lightened, Accommodates Up To (8) Clutches

Big Shot Torque ConvertersHard launches and quicker 60 ft. times can become

reality with a Big Shot Torque Converter. 10HS Series converters work equally well in street/strip, or drag race only cars that run in the 4000-7000 RPM range. 10LS Series converters work best with high torque, large cubic inch engines with a relatively low RPM band. 12HS series are recommended for slightly modified street cars that may see occasional strip duty, while the 12LS is an excellent choice for lightweight vehicles such as street rods demanding a little more stall speed.

Part No. Description Stall SpeedTSI10000HSXHD* TH-350/TH-400 10" Big Shot, XHD 3200-3800

TSI10000HS TH-350/TH-400 10" Big Shot 3200-3800TSI10000LS TH-350/TH-400 10" Big Shot 2600-3200TSI12000HS TH-350/TH-400 12" Big Shot 2400-2800TSI12000LS TH-350/TH-400 12" Big Shot 2000-2400 TSI12010HS TH-700R4 (’84-1/2-Up, 30-Spline) 12" Big Shot 2400-2800TSI12010LS TH-700R4 (’84-1/2-Up, 30-Spline) 12" Big Shot 2000-2400

Notes: TH-350/TH-400 torque converters listed above may also be used with a Powerglide transmission fitted with a Turbo spline input shaft. *XHD (Extra Heavy Duty) converter includes additional ballooning control and a 360° drive flange for applications where horsepower exceeds 650.

Deep Aluminum Transmission PansPans add approximately two quarts

of fluid capacity.Part No. DescriptionTSI2553 ..........PowerglideTSI3510 ..........TH-350TSI4013 ..........TH-400

TKO 500 and 600 Series Manual TransmissionsTKO 500 and 600 Series Transmissions have 4615 alloy steel gears, larger diameter output shafts and one-piece

countershafts to withstand 500-600 ft. lbs. of torque. Available with GM or Ford rear crossmember pattern and 3.27/.68, 2.87/.82 and 2.87/.64 first/fifth gear ratios. Transmissions include neutral safety switches, back-up light sensors, and mechanical and electronic speedometer pick-ups.

Part No. ModelTorque

CapacityInput Spline

Output Spline 1st 2nd 3rd 4th 5th

TRETCET4615 Ford TKO-500 500 ft. lbs. 10 31 3.27 1.97 1.34 1.00 .68TRETCET4616 GM TKO-500 500 ft. lbs. 26 31 3.27 1.97 1.34 1.00 .68TRETCET4617 Ford TKO-600 600 ft. lbs. 26 31 2.87 1.89 1.28 1.00 .82TRETCET4618 GM TKO-600 600 ft. lbs. 26 31 2.87 1.89 1.28 1.00 .82TRETCET5008 Ford TKO-600 600 ft. lbs. 26 31 2.87 1.89 1.28 1.00 .64TRETCET5009 GM TKO-600 600 ft. lbs. 26 31 2.87 1.89 1.28 1.00 .64TRETCET5201 Ford TKO-500 500 ft. lbs. 26 31 3.27 1.97 1.34 1.00 .68

“World Class” T-5 5-Speed Transmission TRE1352-000-251Heavy duty Transmission is built to withstand up to 330 ft. lbs. of torque. Ideal replacement for stock ’79-93 V8

Mustang units. Transmission has 1-1/16" 10-spline input shaft, 2.95 first gear and a .63 fifth gear. Includes short throw shifter.

TKO 500/600 Transmission AccessoriesPart No. DescriptionTRE2-3-6041X ........ Transmission Slip Yoke, TKO 500/600, 31-SplineTRE30-17-2X .......... Offset 5-Speed Shifter, Low Profile, Shaft Shift ThrowTRE30-17-3X .......... Offset 5-Speed Shifter, Standard ProfileTRED9CZ-6392-C† ... Aluminum Bellhousing, TKO 500/600 For SB Ford 289-302TRETCCM-1899† ..... Aluminum Bellhousing, TKO 500/600 For Ford 4.6L†Tremec aluminum bellhousings are NOT SFI-approved.

TSI2553

444 2007-08 DRAG RACING PARTS AND ACCESSORIES

Tow Straps Lightweight heavy duty straps are easily stored.

Ideal for towing cars back to the pits.

Part No. DescriptionTUF18-20 .......2" x 20' - 15,000 Lb.TUF18-30 .......2" x 30' - 15,000 Lb.TUF27-20 .......3" x 20' - 22,500 Lb.TUF27-30 .......3" x 30' - 22,500 Lb.TUF36-20 .......4" x 20' - 30,000 Lb.TUF36-30 .......4" x 30' - 30,000 Lb.TUF54-30 .......6" x 30' - 45,000 Lb.

Cheetah SCS ShifterPopular Cheetah SCS Shifter

offers “touch command” shifting with precision gating for proper en-gagement of each gear. Includes safety park position and reverse lock out. A simple two finger maneuver is all that’s required to move the shifter into reverse or park. Shifter is accepted by NHRA/IHRA and includes a Morse shift cable. A built-in control switch may be used to activate trans-brake, line lock or nitrous.Part No. DescriptionChrysler 1966-Up, Torque Command 727, 904, 998 And 999TUR70001B ....Cheetah SCS Shifter With Black Gate Plate, Control Switch And

Park/Neutral Start Switch, Fwd. Or Reverse PatternTUR70011 ......Cheetah SCS Shifter With Black Gate Plate, Control Switch And

Park/Neutral Start Switch, Reverse Pattern Only With Dual Shift Air Shifter Capabilities

Ford C-4 And C-6TUR70003B ....Cheetah SCS Shifter With Black Gate Plate, Control Switch And

Park/Neutral Start Switch, Fwd. Or Reverse PatternTUR70013 ......Cheetah SCS Shifter With Black Gate Plate, Control Switch And

Park/Neutral Start Switch, Reverse Pattern Only With Dual Shift Air Shifter Capabilities

GM Aluminum Powerglide, TH-200, 250, 350, And 400TUR70002B ....Cheetah SCS Shifter With Black Gate Plate, Control Switch And

Park/Neutral Start Switch, Fwd. Or Reverse PatternTUR70012 ......Cheetah SCS Shifter With Black Gate Plate, Control Switch And

Park/Neutral Start Switch, Reverse Pattern Only With Dual Shift Air Shifter Capabilities

Cheetah SCS Shifter Accessories

Part No. DescriptionTUR00774 ......Micro Switch With Stretch CordTUR70059A ....Black Plastic Shifter CoverTUR70102 ......Heavy Duty 5' Morse Shifter CableTUR70211 ......Neutral Safety Switch Kit, GM Or FordTUR70212 ......Neutral Safety Switch Kit, ChryslerTUR70250 ......Black Plastic Command Center Cover, Includes Push Button Start

And Three Toggle Switches

Cheetah Manual/Automatic Valve BodiesChoose between full manual

control or automatic operation with positive shifts and stock shift pattern. Retains vacuum modula-tor on transmissions originally equipped with modulator. Includes valve body assembly, spacer plate (if required), gaskets and instructions.Part No. DescriptionTUR17676 ...... ’66-77 Chrysler Torqueflite 727/904TUR23250 ...... ’69-80 GM TH-350, Non Lock-UpTUR24145 ...... ’71-87 GM TH-400TUR36155 ...... ’66-76 Ford C-6TUR36156 ...... ’72-91 Ford C-6

Cheetah Manual Valve BodiesFull manual control only

with no automatic features. Eliminates passing gear linkage and/or vacuum modulator. Posi-tive shifts for maximum performance. Available in standard or reverse shift patterns for most popular transmissions. Includes valve body assembly, spacer plate (if required), gaskets and instructions.Part No. DescriptionTUR17156 ...... ’66-90 Chrysler Torqueflite 727/904, Reversed Shift Pattern

(PRN123)TUR17680 ...... ’66-90 Chrysler Torqueflite 727/904, Standard Shift Pattern

(PRN321)TUR23253 ...... ’69-86 GM TH-350, Standard Shift Pattern (PRN321)TUR24141 ...... ’65-87 GM TH-400, Reversed Shift Pattern (PRN123)TUR34188-1 ... ’70-81 Ford C-4, Reversed Shift Pattern (PRN123)

Cheetah Pro Series Tranz Brake Valve Body For Chrysler 727/904 TUR17999Reverse shift pattern, full

manual shift trans-brake valve body provides instant release for quick reaction times and positive shifts. Eliminates use of stock kickdown linkage. Includes valve body, solenoid, pan gasket, filter, hardware and instructions. Not recommended for street use.

TUR23250

TUR70250TUR70059A

TUR24141

4452007-08 DRAG RACING PARTS AND ACCESSORIES

Turbo SystemsEfficient, bolt-on

Turbochargers deliver the highest possible horsepower for sport compacts and V8 muscle cars. Built with ceramic ball bearings, W.A.V.E. technology, air-to-air intercooler, Evolution external wastegate and the Raptor by-pass/blow-off valve, the turbo is virtu-ally indestructible. Other features include black chrome coated piping, high pressure silicone hose, high carbon, cast steel exhaust manifold, a fuel/timing management system, mandrel-bent downpipe and a closed-loop wa-stegate discharge, intake system. Installation hardware and a case of TS-1 synthetic motor oil are included.

Part No. Description Stock HP Kit HPTBN15134 ’03-Up Nissan 350Z, DOHC VQ35, M/T (w/o Converters) 280 385TBN15136 ’03-Up Nissan 350Z, DOHC VQ35, M/T (w/Converters 280 385TBN15152 ’04-Up Toyota Scion tC DOHC 2AZ-FE 160 240TBN15168 ’05-06 Ford Mustang GT 4.6L (w/OEM Converters) 300 450

GT-K TurbochargersMap Enhancement Porting technology

greatly increases efficiency across a wide RPM range and eliminates surge caused by large turbos on small dis-placement engines. The latest aerody-namic HP compressor and F1 turbine wheels maximize exhaust gas energy and reduce back pressure. Exclusive Black-Chrome Perma-Coating reflects heat away from the compressor to lower inlet temperatures.

Part No. Description Compressor Size Power Range Inlet/Outlet ConnectionsTBN11257 GT-K 325 E50 275-375 3.00"/2.00"TBN11258 GT-K 350 E54 300-400 3.00"/2.00"TBN11259 GT-K 450 E60 375-475 4.00"/2.50"TBN11260 GT-K 500 HP60 450-550 4.00"/2.50"TBN11261 GT-K 550 HP61 500-600 4.00"/2.50"TBN11262 GT-K 650 HP66 575-700 4.00"/2.50"TBN11263 GT-K 850 HP72 700-875 4.00"/2.50"TBN11264 GT-K 1000 HP76 800-1,000 4.00"/2.50"

Wastegate KitsEvolution TBN10780Compact Kit has the latest flow design, fits the tightest

turbo systems. Cast, stainless steel body with polished, billet aluminum cap houses the “Nitronic 60” one-piece, stainless steel valve and a rolling type diaphragm.

Racegate TBN10307A high flow Kit with a Deltagate actuator and a 1.80"

dia. stainless steel valve for engines with over 900 horsepower. The Racegate is adjustable when used with the Variable Boost Control Regulator (TBN10402).

NewGenPatent pending, Inconel swing valves offer virtually unre-

stricted exhaust paths and have the capability to control engines with over 1,000 horsepower. Cast stainless bases, billet caps and V-clamp connections are included.Part No. DescriptionTBN10733 ......NewGen Wastegate KitTBN11105 ......HP NewGen Wastegate Kit, Stronger Components

Variable Boost Control KitsUse to adjust boost pressure right from

the driver’s seat. Kits fit any external wastegate or OEM dual port actuator. Part No. DescriptionTBN10402-10 ......... 0-10 PSITBN10402-25 ......... 0-25 PSITBN10402-50 ......... 0-50 PSI

Intercooler Upgrade KitsMassive Spearco Intercooler Upgrade Kits combine

maximum efficiency, low pressure drop and extremely low temperature charges for up to 15 more horsepower. Clamps and silicone hose are included.Part No. DescriptionTBN2-450 .......Subaru WRXTBN2-451 .......Subaru WRX/STITBN2-470 .......Mitsubishi Evo VIII/LancerTBN2-476* .....Dodge Neon SRT-4*Stock bumper reinforcement bar must be removed for installation.

AGM Series 16 Volt Racing Battery TRBS16VTwo-post group 24 Racing Battery uses Absorptive Glass

Mat dry cell technology to produce 650 cold cranking amps and is totally sealed, valve regulated and maintenance free. Terminal bolts, threaded SAE brass posts and 3/8" accessory hook-ups are included. Battery is 10-3/16" long x 6-3/8" wide x 9-1/8" high and weighs 42 lbs.Note: Requires the use of TRBAGM25A19V 16 volt Batter Charger. Turbo Start 16 volt battery chargers purchased prior to October, 2003 may be used with minor internal adjustments. Detailed instructions for early model char-ger modifications are included with each battery.

Voltage Step-Down Resistor TRB16VRESDrops the battery voltage down from

16 volts to 14 volts, the same range that components would operate at if an alternator were used.

16 Volt Battery Charger For AGM Series Batteries TRBAGM25A19VA fully automatic 16 volt, 25 amp

Battery Charger designed to charge the new AGM Series sealed bat-teries. Prevents overcharging by automatically adjusting the charg-ing current relative to the battery’s state of charge. Shuts off auto-matically when the battery reaches full charge. Charger also features an LED charge status indicator, amp gauge and heavy duty, 500 amp terminal clamps.Note: Specifically designed for use with the AGM series sealed batteries. Older model Turbo Start battery chargers will require a voltage adjustment to properly charge AGM series batteries. Failure to adjust the voltage will result in premature battery failure. Contact Turbo Start for instructions on adjusting the voltage on older chargers.

446 2007-08 DRAG RACING PARTS AND ACCESSORIES

Pinto Control ArmsTubular steel Control Arms fit Pinto/

Mustang II style spindles.Part No. DescriptionUBM19-0805 .......... Upper Control ArmUBM65-0220 .......... Lower Control Arm, RightUBM65-0230 .......... Lower Control Arm, Left

Gas Pedal UBM65-1000-A

Door Hinge Kit UBM65-1800Lightweight Hinge Kit is ideal when

installing lightweight fiberglass doors. Two assemblies per kit.

Track Locator BracketsPart No. DescriptionUBM46-3550 .......... 1/2" HoleUBM46-3555 .......... 5/8" HoleUBM46-3560 .......... 3/4" Hole

Ford Axle Bearing RetainersRetainers are sold individually.

Part No. DescriptionUBM65-2000 .......... Small FordUBM65-2010 .......... Large Ford

F33i Series Billet Aluminum CalipersExclusive Interlock Brake System Technology provides

the ultimate combination of weight, rigidity and perfor-mance. Increased rigidity means less flex and distortion for improved stopping power, decreased pedal effort, maximum stroke and reduced brake pad taper. Calipers are the same as those offered in U.S. Brake drag brake kits and are available to fit 1.25" or .810" thick rotors with 5.25" mount spacing.

Part No. Piston Dia. Disc WidthUSB7241-1203 1.38" 1.25"USB7241-1204 1.28" .810"

Master CylindersAluminum Master Cylinder housings fea-

ture stainless steel bores, external return springs, standard outlet fitting threads and internal sealing bellows. Pur-chase separately or in a kit with cylinder, reservoirs, covers and hardware.

Description Master Cyl. Kit Master Cyl. Only Master Cyl. Rebuild Kit3/4" Bore USB2011-1501 USB2011-1512 USB2012-40617/8" Bore USB2011-1502 USB2011-1514 USB2012-40621" Bore USB2011-1503 USB2011-1516 USB2012-4063

High Temperature Racing Brake FluidPart No. DescriptionUSB9501-6570 ....... 570° Gold Brake Fluid, 570° Dry

Boiling Point, 12 Oz. BottleUSB9501-6600 ....... Ultra HTX Brake Fluid, 618° Dry

Boiling Point, 16.9 Oz. Bottle

5" Pro Recording Xtreme TachometersTach can record an entire

run, from burn-out to shut down. Functions include burn-out RPM, RPM before launch, converter flash stall RPM, shift point RPM, clutch slippage and RPM in traps. The Xtreme may be connected to line lock or trans. brake and offers three shift settings, four stored replays, for-ward or reverse playback, and real time or slow motion playback with 90 or 360 second recording times. Part No. DescriptionVDO333-936D ...Xtreme Tachometer, 9,000 RPM, Black Dial Face VDO333-937D ...Xtreme Tachometer, 11,000 RPM, Black Dial FaceVDO333-938D ...Xtreme Tachometer, 9,000 RPM, White Dial FaceVDO333-939D ...Xtreme Tachometer, 11,000 RPM, White Dial FaceAccessories For 5" Extreme/PRT TachometersVDO240-104D ...In-Dash Mounting Bracket

Mega-Lite Shift Light VDO600-895DBright LED lights illuminate instantly for

timely, consistent shifts. Light intensity may be adjusted for day or nighttime rac-ing, diffuser covers are not necessary.

Mini Pressure Gauges Direct mount, 1-1/2"

diameter mechanical Gauges are ideal for monitoring fuel pres-sure. Offered in black or chrome, gauges have a 1/8"-27NPT connection.

Description Black Part No. Chrome Part No.Mini Pressure Gauge, 0-15 PSI VDO153-006D VDO153-002DMini Pressure Gauge, 0-60 PSI VDO153-008D VDO153-005DMini Pressure Gauge, 0-100 PSI VDO153-009D VDO153-003D

VDO240-104D

4472007-08 DRAG RACING PARTS AND ACCESSORIES

Flameproof CoatingsDeveloped for the aerospace industry, heat

resistant Coating is ideal for use on headers, exhaust manifolds, etc. Sold in 11 oz. net wt. cans.Part No. Color Part No. ColorVHTSP101 ...Flat White VHTSP109 ... Flat RedVHTSP102 ...Flat Black VHTSP110 ... Flat BlueVHTSP105 ...Flat Gold VHTSP115 ... ClearVHTSP106 ...Flat Silver VHTSP117 ... Flat AluminumVHTSP108 ...Flat Yellow VHTSP118 ... Flat White Primer

Engine EnamelsUrethane resins provide exceptional durability

under the most severe conditions. Paint will withstand spills of the strong solvents and ad-ditives found in racing gasoline blends. Sold in 11 oz. net wt. cans.Part No. Color Part No. ColorVHTSP120 ...Hemi Orange VHTSP132 ... Universal GoldVHTSP121 ...Bright Red VHTSP133 ... Chevy V8 BlueVHTSP122 ...Pontiac Blue VHTSP134 ... Ford Light BlueVHTSP123 ...Chevy Orange VHTSP135 ... GM BlueVHTSP124 ...Gloss Black VHTSP136 ... Late Chrysler BlueVHTSP125 ...Ford Dark Blue VHTSP137 ... Ford GrayVHTSP126 ...Early Chrysler Blue VHTSP138 ... Ford Corporate BlueVHTSP127 ...Aluminum VHTSP139 ... GM Satin BlackVHTSP128 ...Gloss Yellow VHTSP142 ... Pontiac Metallic BlueVHTSP129 ...Gloss White VHTSP758 ... LavenderVHTSP130 ...Flat Black

“Quick Coat” EnamelsDesigned to provide a tough and durable

enamel coating without heat curing or special processing. Ideal for professional or home use. Sold in 11 oz. net wt. cans.Part No. Color Part No. ColorVHTSP501 ...Fire Red VHTSP509 ... Gloss WhiteVHTSP504 ...Gloss Black VHTSP510 ... Flat BlackVHTSP507 ...Bright Aluminum

“Nu-Cast” Cast CoatingsMakes cast iron parts look like new.

Produces an original look and is a “must have” item for any restoration project. Sold in 11 oz. net wt. cans.Part No. ColorVHTSP997 ...Cast Iron PaintVHTSP998 ...Header Paint

Black “Wrinkle Plus” Coating VHTSP201Rich texture adds that extra touch of personal

styling and withstands fading, grease, engine cleaners and severe weather conditions. Mopar restorers: Wrinkle Plus is the paint for black wrinkle air cleaner restoration. 16 oz. Can.

Roll Bar And Chassis PaintOne step epoxy Paint dries to a baked-on,

porcelain-like finish that is chemical, corrosion, rust and salt resistant. 11 oz. net wt. cans.Part No. ColorVHTSP670 ...Gloss Black VHTSP671 ...Satin Black

Epoxy All Weather CoatingsVHT Epoxy Coating produces porcelain-

like finish with a high gloss. Sold in 11 oz. net wt. cans.Part No. Color Part No. ColorVHTSP650 ...Gloss Black VHTSP654 ... Gloss RedVHTSP651 ...Gloss White

Hi-Temp Brake PaintHigh-Temp Paint may be used on aluminum

or other cast metals and is ideal for brake rotors, drums, and calipers. Will not rust, chip or crack. Sold in 11 oz. net wt. cans.Part No. Color Part No. ColorVHTSP731 ...Real Red VHTSP738 ... Bright YellowVHTSP734 ...Gloss Black VHTSP739 ... Satin BlackVHTSP735 ...Cast Aluminum

Engine-Prep Assembly Lube VHTSP701Special blend of protective lubricants

formulated to reduce internal friction. Eliminates damage at initial start-up in new and rebuilt engines. Also great for transmission overhauls and bearing re-placements. Sold in 11 oz. net wt. can.

Wheely Bar Chalk VHTSP168 Spray-on Wheely Bar Chalk for

suspension tuning is easier to clean off than shoe polish style marking. Offered in white only. 11 oz. aerosol can.

PJ1 Fog Blocker VHT25-4Specially formulated to prevent fogging

on face shields, glasses or goggles, even under extreme humidity. 4 oz. pump spray bottle.

Track Bite VHTSP162A special formulation for enhancing

traction. Can be applied to track surface or tires for increased adhesion. Does not soften tires or track surface. Sold in one gallon container.

All Items On This PageGround Shipment Only

All Items On This PageGround Shipment Only

448 2007-08 DRAG RACING PARTS AND ACCESSORIES

All-In-One SiliconeValco has pared down their automotive

silicone line to just one premium grade RTV Silicone that can fill the needs of any racer. All colors of Valco silicone are low volatility, oxygen sensor safe and will withstand high temperatures.Part No. DescriptionVLC71105 .......Clear All-In-One Silicone, 3 Oz. TubeVLC71135 .......Black All-In-One Silicone, 3 Oz. TubeVLC71142 .......Black All-In-One Silicone, 10.3 Oz. CartridgeVLC71195 .......Aluminum All-In-One Silicone, 3 Oz. TubeVLC71202 .......Aluminum All-In-One Silicone, 11.3 Oz. Cartridge

Tube-Grip® With All-In-One Silicone VLC71196An innovative, 14 gauge steel tool

that can easily dispense material from flexible tubes with no waste. Applies 10 times the pressure of squeezing by hand and dispenses up to 35% more material out of each tube. Includes a 3 oz. tube of alumi-num All-In-One silicone.

Hylomar® Gasket MakerNon-hardening, polyure-

thane-based Hylomar is impervious to gasoline, oil and any automotive fluid. Use Hylomar as a gasket maker, gasket dressing or thread sealant.Part No. DescriptionVLC71255 .......Hylomar Blue, Medium, 1.5 Oz. TubeVLC71260 .......Hylomar Blue, Medium, 250ml Brush Top CanVLC71285 .......Hylomar Blue, Medium, 100 Gram TubeVLC71294 .......Hylomar, 360g Aerosol Can

HV-350™ Adhesive/SealantValco’s HV-350’s elasticity and

abrasion resistance make it ideal for high vibration applications. Mate-rial can be sanded and bonds both chemically and mechanically. Can be used on porous and non-porous substrates such as wood, glass, plastic, vinyl, metal, fabric and even concrete. Can be thinned with sol-vents such as Valco Solvent 184 or lacquer thinner and be brushed on as a protective coating.Part No. DescriptionVLC71155 .......HV-350, Non-Slump, 3.35 Oz. TubeVLC71156 .......HV-350, Non-Slump, 3.35 Oz. Tube With Tube Grip

Peeler VLC71688Removes silicone, paper or fiber gasket

material more quickly and eas-ily than a gasket scraper. Short, easy-to-hold Peeler has a unique, self-leveling blade assembly that won’t dig in or gouge surfaces.

Thread LockersAnaerobic compounds developed for locking,

retaining, and sealing fasteners and components will perform in a wide temperature range. Thread Lockers prevent corrosion, lubricate components during assembly and resist water and oils. Avail-able in medium strength for parts that need periodic disassembly, and high strength for parts that will not be disassembled.Part No. DescriptionVLC71620 .......Medium Strength Blue, 10 ml BottleVLC71622 .......High Strength Red, 10 ml Bottle

Gel Lube VLC71756Unique lubricant sprays on as a liquid and

instantly forms into a gel substance. Ideal for use during engine assembly to prevent corro-sion. Blends together with motor oil. Excellent corrosion protection for any engine or trans-mission which will be stored.

White Lithium Grease VLC795903Multi-purpose, 12-hydroxy,

lithium-based Grease has out-standing resistance to water and is perfect for high-speed, heavy load applications. Contains oxidation and corrosion inhibitors. 10 oz. tube.

Epoxi-Putty VLC71636Kneadable, steel reinforced Epoxy-Putty cures rock-

hard within minutes of mixing. Can be drilled, tapped or filed after 1 hour and can withstand temperatures up to 500°F. Packaged in 2 oz. clear cylinder with cap.

Fastshine™ Cleaner/Detailer VLC71603Fastshine gives a quick, professional shine

to a variety of surfaces, including clear coat. Removes fingerprints, bugs, water spots, bird droppings, etc. 32 oz. spray bottle.

Magic Mix®

The “lazy man’s polish,” Magic Mix cleaner and polish shines and protects aluminum, stainless steel, diamond plate, brass, gold, silver, magnesium and copper. Magic Mix removes oxidation, tar and bugs from paint and even removes rust from chrome. For tough stains, clean and prepare metal with Magic Mix Metal Cleaner. Part No. DescriptionVLC71610 .......Magic Mix Cleaner And Polish Set, 8 Oz. Ea.VLC71611 .......Magic Mix Polish, 8 Oz. BottleVLC71640 .......Magic Mix Polish, 16 Oz. BottleVLC71644 .......Magic Mix Speed Wax, 16 Oz. Bottle

VLC71156

Ground Shipment

Only


Recommended