Date post: | 04-Jun-2018 |
Category: |
Documents |
Upload: | carlos-anaya-torres |
View: | 221 times |
Download: | 0 times |
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 1/31
Administr ator 's Guide
SAP®Visual Enterpr ise View er 7.1
Target Audience
■ Consultants
■ Administrators
■ Others
Customer
Document version 1.2 18/ 07/ 2013
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 2/31
© Copyright 2012 SAP AG. All rights reserved
No part of this publication may be reproduced or transmitted in
any form or for any purpose without the express permission of
SAP AG. The information contained herein may be changedwithout prior notice.
Some software products marketed by SAP AG and its
distributors contain proprietary software components of othersoftware vendors.
Microsoft, Windows, Excel, Outlook, PowerPoint, Silverlight,and Visual Studio are registered trademarks of Microsoft
Corporation.
IBM, DB2, DB2 Universal Database, System i, System i5,System p, System p5, System x, System z, System z10, z10,z/VM, z/OS, OS/390, zEnterprise, PowerVM, Power
Architecture, Power Systems, POWER7, POWER6+,POWER6, POWER, PowerHA, pureScale, PowerPC,BladeCenter, System Storage, Storwize, XIV, GPFS, HACMP,RETAIN, DB2 Connect, RACF, Redbooks, OS/2, AIX,
Intelligent Miner, WebSphere, Tivoli, Informix, and SmarterPlanet are trademarks or registered trademarks of IBM
Corporation.
Linux is the registered trademark of Linus Torvalds in the
United States and other countries.
Adobe, the Adobe logo, Acrobat, PostScript, and Reader aretrademarks or registered trademarks of Adobe SystemsIncorporated in the United States and other countries.
Oracle and Java are registered trademarks of Oracle and itsaffiliates.
UNIX, X/Open, OSF/1, and Motif are registered trademarks ofthe Open Group.
Citrix, ICA, Program Neighborhood, MetaFrame, WinFrame,
VideoFrame, and MultiWin are trademarks or registeredtrademarks of Citrix Systems Inc.
HTML, XML, XHTML, and W3C are trademarks or registered
trademarks of W3C®, World Wide Web Consortium,
Massachusetts Institute of Technology.
Apple, App Store, iBooks, iPad, iPhone, iPhoto, iPod, iTunes,Multi-Touch, Objective-C, Retina, Safari, Siri, and Xcode aretrademarks or registered trademarks of Apple Inc.
IOS is a registered trademark of Cisco Systems Inc.
RIM, BlackBerry, BBM, BlackBerry Curve, BlackBerry Bold,BlackBerry Pearl, BlackBerry Torch, BlackBerry Storm,BlackBerry Storm2, BlackBerry PlayBook, and BlackBerry
App World are trademarks or registered trademarks of
Research in Motion Limited.Google App Engine, Google Apps, Google Checkout, GoogleData API, Google Maps, Google Mobile Ads, Google Mobile
Updater, Google Mobile, Google Store, Google Sync, GoogleUpdater, Google Voice, Google Mail, Gmail, YouTube, Dalvikand Android are trademarks or registered trademarks ofGoogle Inc.
INTERMEC is a registered trademark of Intermec
Technologies Corporation.
Wi-Fi is a registered trademark of Wi-Fi Alliance.
Bluetooth is a registered trademark of Bluetooth SIG Inc.
Motorola is a registered trademark of Motorola Trademark
Holdings LLC.Computop is a registered trademark of Computop
Wirtschaftsinformatik GmbH.
SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign,
SAP Business Objects Explorer, StreamWork, SAP HANA,and other SAP products and services mentioned herein as well
as their respective logos are trademarks or registeredtrademarks of SAP AG in Germany and other countries.
Business Objects and the Business Objects logo, BusinessObjects, Crystal Reports, Crystal Decisions, Web Intelligence,
Xcelsius, and other Business Objects products and services
mentioned herein as well as their respective logos aretrademarks or registered trademarks of Business ObjectsSoftware Ltd. Business Objects is an
SAP company.
Sybase and Adaptive Server, iAnywhere, Sybase 365, SQLAnywhere, and other Sybase products and services mentionedherein as well as their respective logos are trademarks or
registered trademarks of Sybase Inc. Sybase is an SAP
company.
Crossgate, m@gic EDDY, B2B 360°, and B2B 360° Services
are registered trademarks of Crossgate AG in Germany and
other countries. Crossgate is an SAP company.
All other product and service names mentioned are thetrademarks of their respective companies. Data contained inthis document serves informational purposes only. National
product specifications may vary.
These materials are subject to change without notice. Thesematerials are provided by SAP AG and its affiliated companies
("SAP Group") for informational purposes only, withoutrepresentation or warranty of any kind, and SAP Group shall
not be liable for errors or omissions with respect to thematerials. The only warranties for SAP Group products andservices are those that are set forth in the express warrantystatements accompanying such products and services, if any.
Nothing herein should be construed as constituting anadditional warranty.
Portions of this software are based in part onOpenEXR. © 2002, Industrial Light & Magic, a division ofLucas Digital Ltd. LLC. All rights reserved.
Portions of this software are based in part on theJasPer Software. © 1999-2000, Image Power, Inc. andthe University of British Columbia. © 2001 Michael David
Adams. All rights reserved.
Portions of this software are based in part on theNvidia CG Shader Library. © 2002 NVIDIA Corporation.
All rights reserved.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 3/31
Portions of this software are based in part on theNvidia SDK. Copyright © 2002-2008, NVIDIACorporation. All rights reserved.
Portions of this software are based in part on theTIFF Library. © 1988-1997 Sam Leffler. © 1991-1997
Silicon Graphics, Inc. Portions of this software are based in part onPKWARE. © 1991, 1992, 1994 and 1995 PKWARE Inc.
All rights reserved.
Portions of this software are based in part on TTFFoundations. © 1996-2005 Trade and TechnologiesFrance. All rights reserved.
Portions of this software are based in part on the Autodesk DWF Toolkit. © 1996-2005 Autodesk, Inc. Allrights reserved.
This product includes software developed by theOpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org).
Portions of this software are based in part on3DConnexion. © 1998-2005. All rights reserved.
This product includes software developed byCOLLADA for use with Maya and 3DS Max. Copyright ©2005-2007 Feeling Software Inc. Copyright © 2005-2007Sony Computer Entertainment America.
Portions of this software are based in part on theOpenGLExtension Wrangler Library. Copyright © 2002-2007, Milan Ikits <milan ikits[]ieee org>. Copyright ©2002-2007, Marcelo E. Magallon <mmagallo[]debianorg>. Copyright © 2002, Lev Povalahev. All rights
reserved.
WISE Software Solutions
Portions of the software provided with this product are provided undera license from WISE Software Solutions, Inc. Copyright WISE
Software Solutions, Inc. 2010. All rights reserved.
gSOAP License
Copyright © 2001-2004 Robert A. van Engelen, Genivia inc. Allrights reserved.
Part of the software embedded in this product is gSOAP software.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDEDBY GENIVIA INC AND ANY EXPRESS OR IMPLIEDWARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORYOF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OFSUCH DAMAGE.
OpenEXR License
Copyright © 2002, Industrial Light & Magic, a division of Lucas
Digital Ltd. LLC. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions aremet:
1. Redistributions of source code must retain the above copyrightnotice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the abovecopyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials providedwith the distribution.
3. Neither the name of Industrial Light & Magic nor the names of its
contributors may be used to endorse or promote products derivedfrom this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTHOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITEDTO, THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, ORCONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANY THEORYOF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
JasPer Software License
Copyright © 1999-2000, Image Power, Inc. and the University of
British Columbia / Copyright (c) 2001 Michael David Adams. Allrights reserved.
IMAGE POWER JPEG-2000 PUBLIC LICENSE
Grant
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 4/31
Permission is hereby granted, free of charge, to any person (the
"User") obtaining a copy of this software and associateddocumentation, to deal in the JasPer Software without restriction,
including without limitation the right to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the JasPerSoftware (in source and binary forms), and to permit persons to whom
the JasPer Software is furnished to do so, provided further that theLicense Conditions below are met.
License Conditions
A. Redistributions of source code must retain the above copyrightnotice, and this list of conditions, and the following disclaimer.
B. Redistributions in binary form must reproduce the above copyrightnotice, and this list of conditions, and the following disclaimer in the
documentation and/or other materials provided with the distribution.
C. Neither the name of Image Power, Inc. nor any other contributor(including, but not limited to, the University of British Columbia andMichael David Adams) may be used to endorse or promote products
derived from this software without specific prior written permission.
D. User agrees that it shall not commence any action against ImagePower, Inc., the University of British Columbia, Michael DavidAdams, or any other contributors (collectively "Licensors") for
infringement of any intellectual property rights ("IPR") held by the
User in respect of any technology that User owns or has a right tolicense or sublicense and which is an element required in order toclaim compliance with ISO/IEC 15444-1 (that is, JPEG-2000 Part 1)."IPR" means all intellectual property rights worldwide arising under
statutory or common law, and whether or not perfected, including,
without limitation, all (i) patents and patent applications owned orlicensable by User; (ii) rights associated with works of authorshipincluding copyrights, copyright applications, copyright registrations,
mask work rights, mask work applications, mask work registrations;
(iii) rights relating to the protection of trade secrets and confidentialinformation; (iv) any right analogous to those set forth in subsections(i), (ii), or (iii) and any other proprietary rights relating to intangible
property (other than trademark, trade dress, or service mark rights);and (v) divisions, continuations, renewals, reissues and extensions ofthe foregoing (as and to the extent applicable) now existing, hereafterfiled, issued or acquired.
E. If User commences an infringement action against any Licensor(s)then such Licensor(s) shall have the right to terminate User's licenseand all sublicenses that have been granted hereunder by User to other
parties.
F. This software is for use only in hardware or software products thatare compliant with ISO/IEC 15444-1 (that is, JPEG-2000 Part 1). No
license or right to this Software is granted for products that do notcomply with ISO/IEC 15444-1. The JPEG-2000 Part 1 standard can be
purchased from the ISO.
THIS DISCLAIMER OF WARRANTY CONSTITUTES AN
ESSENTIAL PART OF THIS LICENSE. NO USE OF THE JASPERSOFTWARE IS AUTHORIZED HEREUNDER EXCEPT UNDERTHIS DISCLAIMER. THE JASPER SOFTWARE IS PROVIDED
BY THE LICENSORS AND CONTRIBUTORS UNDER THIS
LICENSE ON AN ̀ `AS-IS'' BASIS, WITHOUT WARRANTY OFANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
WITHOUT LIMITATION, WARRANTIES THAT THE JASPERSOFTWARE IS FREE OF DEFECTS, IS MERCHANTABLE, IS FITFOR A PARTICULAR PURPOSE OR IS NON-INFRINGING.
THOSE INTENDING TO USE THE JASPER SOFTWARE ORMODIFICATIONS THEREOF FOR USE IN HARDWARE ORSOFTWARE PRODUCTS ARE ADVISED THAT THEIR USEMAY INFRINGE EXISTING PATENTS, COPYRIGHTS,TRADEMARKS, OR OTHER INTELLECTUAL PROPERTY
RIGHTS. THE ENTIRE RISK AS TO THE QUALITY ANDPERFORMANCE OF THE JASPER SOFTWARE IS WITH THE
USER. SHOULD ANY PART OF THE JASPER SOFTWAREPROVE DEFECTIVE IN ANY RESPECT, THE USER (AND NOT
THE INITIAL DEVELOPERS, THE UNIVERSITY OF BRITISHCOLUMBIA, IMAGE POWER, INC., MICHAEL DAVID ADAMS,OR ANY OTHER CONTRIBUTOR) SHALL ASSUME THE COST
OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGALTHEORY, WHETHER TORT (INCLUDING NEGLIGENCE),CONTRACT, OR OTHERWISE, SHALL THE INITIALDEVELOPER, THE UNIVERSITY OF BRITISH COLUMBIA,
IMAGE POWER, INC., MICHAEL DAVID ADAMS, ANY OTHERCONTRIBUTOR, OR ANY DISTRIBUTOR OF THE JASPER
SOFTWARE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES,BE LIABLE TO THE USER OR ANY OTHER PERSON FOR ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIALDAMAGES OF ANY CHARACTER INCLUDING, WITHOUTLIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORKSTOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR
ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES,EVEN IF SUCH PARTY HAD BEEN INFORMED, OR OUGHT TOHAVE KNOWN, OF THE POSSIBILITY OF SUCH DAMAGES.THE JASPER SOFTWARE AND UNDERLYING TECHNOLOGY
ARE NOT FAULT-TOLERANT AND ARE NOT DESIGNED,MANUFACTURED OR INTENDED FOR USE OR RESALE ASON-LINE CONTROL EQUIPMENT IN HAZARDOUSENVIRONMENTS REQUIRING FAIL-SAFE PERFORMANCE,SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES,
AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS,AIR TRAFFIC CONTROL, DIRECT LIFE SUPPORT MACHINES,
OR WEAPONS SYSTEMS, IN WHICH THE FAILURE OF THEJASPER SOFTWARE OR UNDERLYING TECHNOLOGY OR
PRODUCT COULD LEAD DIRECTLY TO DEATH, PERSONALINJURY, OR SEVERE PHYSICAL OR ENVIRONMENTALDAMAGE ("HIGH RISK ACTIVITIES"). LICENSORSPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES. USER
WILL NOT KNOWINGLY USE, DISTRIBUTE OR RESELL THEJASPER SOFTWARE OR UNDERLYING TECHNOLOGY ORPRODUCTS FOR HIGH RISK ACTIVITIES AND WILL ENSURE
THAT ITS CUSTOMERS AND END-USERS OF ITS PRODUCTSARE PROVIDED WITH A COPY OF THE NOTICE SPECIFIED IN
THIS SECTION.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 5/31
NVIDIA CG Shader Library License
Copyright © 2002, NVIDIA Corporation. All rights reserved.
NVIDIA Corporation("NVIDIA") supplies this software to you inconsideration of your agreement to the following terms, and your use,installation, modification or redistribution of this NVIDIA software
constitutes acceptance of these terms. If you do not agree with theseterms, do not use, install, modify or redistribute this NVIDIAsoftware.
In consideration of your agreement to abide by the following terms,
and subject to these terms, NVIDIA grants you a personal, non-exclusive license, under NVIDIA’s copyrights in this original NVIDIA
software (the "NVIDIA Software"), to use, reproduce, modify andredistribute the NVIDIA Software, with or without modifications, in
source and/or binary forms; provided that if you redistribute the NVIDIA Software, you must retain the copyright notice of NVIDIA,this notice and the following text and disclaimers in all suchredistributions of the NVIDIA Software. Neither the name,
trademarks, service marks nor logos of NVIDIA Corporation may be
used to endorse or promote products derived from the NVIDIASoftware without specific prior written permission from NVIDIA.Except as expressly stated in this notice, no other rights or licensesexpress or implied, are granted by NVIDIA herein, including but not
limited to any patent rights that may be infringed by your derivative
works or by other works in which the NVIDIA Software may beincorporated. No hardware is licensed hereunder.
THE NVIDIA SOFTWARE IS BEING PROVIDED ON AN "AS IS"
BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUTLIMITATION, WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR ITS USE AND OPERATION
EITHER ALONE OR IN COMBINATION WITH OTHER
PRODUCTS.IN NO EVENT SHALL NVIDIA BE LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL, EXEMPLARY, CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSTPROFITS; PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) OR ARISING IN ANY WAY OUT OF THE USE,REPRODUCTION, MODIFICATION AND/OR DISTRIBUTION OFTHE NVIDIA SOFTWARE, HOWEVER CAUSED AND
WHETHER UNDER THEORY OF CONTRACT, TORT
(INCLUDING NEGLIGENCE), STRICT LIABILITY OROTHERWISE, EVEN IF NVIDIA HAS BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGE.
NVIDIA SDK License
Copyright © 2002-2008, NVIDIA Corporation.
NVIDIA Corporation("NVIDIA") supplies this software to you in
consideration of your agreement to the following terms, and your use,
installation, modification or redistribution of this NVIDIA softwareconstitutes acceptance of these terms. If you do not agree with these
terms, do not use, install, modify or redistribute this NVIDIA
software.
In consideration of your agreement to abide by the following terms,
and subject to these terms, NVIDIA grants you a personal, non-
exclusive license, under NVIDIA's copyrights in this original NVIDIAsoftware (the "NVIDIA Software"), to use, reproduce, modify and
redistribute the NVIDIA Software, with or without modifications, insource and/or binary forms; provided that if you redistribute the NVIDIA Software, you must retain the copyright notice of NVIDIA,this notice and the following text and disclaimers in all such
redistributions of the NVIDIA Software. Neither the name,
trademarks, service marks nor logos of NVIDIA Corporation may beused to endorse or promote products derived from the NVIDIASoftware without specific prior written permission from NVIDIA.Except as expressly stated in this notice, no other rights or licenses
express or implied, are granted by NVIDIA herein, including but not
limited to any patent rights that may be infringed by your derivativeworks or by other works in which the NVIDIA Software may beincorporated. No hardware is licensed hereunder.
THE NVIDIA SOFTWARE IS BEING PROVIDED ON AN "AS IS"BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANYKIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUTLIMITATION, WARRANTIES OR CONDITIONS OF TITLE,
NON-INFRINGEMENT, MERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE, OR ITS USE AND OPERATION
EITHER ALONE OR IN COMBINATION WITH OTHERPRODUCTS.
IN NO EVENT SHALL NVIDIA BE LIABLE FOR ANY SPECIAL,INDIRECT, INCIDENTAL, EXEMPLARY, CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSTPROFITS; PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) OR ARISING IN ANY WAY OUT OF THE USE,
REPRODUCTION, MODIFICATION AND/OR DISTRIBUTION OFTHE NVIDIA SOFTWARE, HOWEVER CAUSED ANDWHETHER UNDER THEORY OF CONTRACT, TORT
(INCLUDING NEGLIGENCE), STRICT LIABILITY OROTHERWISE, EVEN IF NVIDIA HAS BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGE.
TIFF License
Copyright © 1988-1997 Sam Leffler / Copyright © 1991-1997 SiliconGraphics, Inc. All rights reserved.
Permission to use, copy, modify, distribute, and sell this software andits documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission
notice appear in all copies of the software and related documentation,and (ii) the names of Sam Leffler and Silicon Graphics may not be
used in any advertising or publicity relating to the software without thespecific, prior written permission of Sam Leffler and Silicon Graphics.
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT
WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR
OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 6/31
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANYDAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
DATA OR PROFITS, WHETHER OR NOT ADVISED OF THEPOSSIBILITY OF DAMAGE, AND ON ANY THEORY OFLIABILITY, ARISING OUT OF OR IN CONNECTION WITH THEUSE OR PERFORMANCE OF THIS SOFTWARE.
Autodesk FBX
This software contains Autodesk® FBX® code developed byAutodesk, Inc. Copyright 2012 Autodesk, Inc. All rights, reserved.
Such code is provided “as is” and Autodesk, Inc. disclaims any and allwarranties, whether express or implied, including without limitation
the implied warranties of merchantability, fitness for a particular purpose or non-infringement of third party rights. In no event shallAutodesk, Inc. be liable for any direct, indirect, incidental, special,
exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or
profits; or business interruption) however caused and on any theory ofliability, whether in contract, strict liability, or tort (including
negligence or otherwise) arising in any way out of such code.”
Autodesk DWF Toolkit Disclaimer of Warranty
© 1996-2005 Autodesk, Inc. All rights reserved.
The incorporated portions of the Autodesk DWF Toolkit are provided"AS IS" and without any warranty of any kind. AUTODESK DOES NOT MAKE AND HEREBY DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO,THE WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, OR ARISING FROM A COURSE OF DEALING,USAGE, OR TRADE PRACTICE.
3DConnexion License
© 1998-2005 3Dconnexion. All rights reserved.
Permission to use, copy, modify, and distribute this software for all purposes and without fees is hereby granted provided that thiscopyright notice appears in all copies. Permission to modify thissoftware is granted and 3Dconnexion will support such modifications
only is said modifications are approved by 3Dconnexion.
COLLADA for Maya, 3DSMax
Copyright © 2005-2007 Feeling Software Inc.
Copyright © 2005-2007 Sony Computer Entertainment America
Permission is hereby granted, free of charge, to any person obtaining acopy of this software and associated documentation files (the"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the
following conditions:
The above copyright notice and this permission notice shall beincluded in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITED TO THE WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSEAND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANYCLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISINGFROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Adobe Systems Incorporated Open Source License
NOTICE TO USER: Adobe Systems Incorporated is providing the
Software and Documentation for use under the terms of thisAgreement. Any use, reproduction, modification or distribution of theSoftware or Documentation, or any derivatives or portions thereof,constitutes your acceptance of this Agreement.
As used in this Agreement, "Adobe" means Adobe SystemsIncorporated. "Software" means the software code accompanying thisAgreement. "Documentation" means the documents, specificationsand all other items accompanying this Agreement other than the
Software.
1. LICENSE GRANT
Subject to the terms of this Agreement, Adobe hereby grants you a
non-exclusive, worldwide, royalty free license to use, reproduce, prepare derivative works from, publicly display, publicly perform,distribute and sublicense the Software for any purpose, provided thecopyright notice below appears in a conspicuous location within the
source code of the distributed Software and this license is distributedin the supporting documentation of the Software you distribute.
Copyright (2011) Adobe Systems Incorporated and others. All rightsreserved. The original version of this source code may be found at
http://adobe.com.
Subject to the terms of this Agreement, Adobe hereby grants you anon-exclusive, worldwide, royalty free license to use, reproduce, publicly display, publicly perform, distribute and sublicense the
Documentation for any purpose. You may not modify the
Documentation. No title to the intellectual property in the Software or Documentationis transferred to you under the terms of this Agreement. You do not
acquire any rights to the Software or the Documentation except as
expressly set forth in this Agreement.
If you choose to distribute the Software in a commercial product, youdo so with the understanding that you agree to defend, indemnify and
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 7/31
hold harmless Adobe against any losses, damages and costs arising
from the claims, lawsuits or other legal actions arising out of suchdistribution. You may distribute the Software in object code form
under your own license, provided that your license agreement:
(a) complies with the terms and conditions of this license agreement;
(b) effectively disclaims all warranties and conditions, express orimplied, on behalf of Adobe;
(c) effectively excludes all liability for damages on behalf of Adobe;
(d) states that any provisions that differ from this Agreement areoffered by you alone and not Adobe; and
(e) states that the Software is available from you or Adobe and informs
licensees how to obtain it in a reasonable manner on or through amedium customarily used for software exchange.
2. DISCLAIMER OF WARRANTY
ADOBE LICENSES THE SOFTWARE AND DOCUMENTATION
TO YOU ONLY ON AN "AS IS" BASIS WITHOUT WARRANTIES
OR CONDITIONS OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING WITHOUT LIMITATION ANY
WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. ADOBE MAKES NO WARRANTY
THAT THE SOFTWARE OR DOCUMENTATION WILL BE
ERROR-FREE. Each user of the Software or Documentation is solelyresponsible for determining the appropriateness of using anddistributing the Software and Documentation and assumes all risksassociated with its exercise of rights under this Agreement, including
but not limited to the risks and costs of program errors, compliancewith applicable laws, damage to or loss of data, programs, or
equipment, and unavailability or interruption of operations. Use of theSoftware and Documentation is made with the understanding that
Adobe will not provide you with any technical or customer support ormaintenance. Some states or jurisdictions do not allow the exclusion of
implied warranties or limitations on how long an implied warrantymay last, so the above limitations may not apply to you. To the extent
permissible, any implied warranties are limited to ninety (90) days.
3. LIMITATION OF LIABILITY
ADOBE AND ITS SUPPLIERS SHALL NOT BE LIABLE FOR
LOSS OR DAMAGE ARISING OUT OF THIS AGREEMENT ORFROM THE USE OF THE SOFTWARE OR DOCUMENTATION.IN NO EVENT WILL ADOBE BE LIABLE TO YOU OR ANYTHIRD PARTY FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES
INCLUDING LOST PROFITS, LOST SAVINGS, COSTS, FEES,OR EXPENSES OF ANY KIND ARISING OUT OF ANYPROVISION OF THIS AGREEMENT OR THE USE OR THE
INABILITY TO USE THE SOFTWARE OR DOCUMENTATION,HOWEVER CAUSED AND UNDER ANY THEORY OFLIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY ORTORT (INCLUDING NEGLIGENCE OR OTHERWISE), EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
ADOBE'S AGGREGATE LIABILITY AND THAT OF ITS
SUPPLIERS UNDER OR IN CONNECTION WITH THISAGREEMENT SHALL BE LIMITED TO THE AMOUNT PAID BY
YOU FOR THE SOFTWARE AND DOCUMENTATION.
4. TRADEMARK USAGE
Adobe and XMP are the trademarks or registered trademarks of AdobeSystems Incorporated in the United States and other countries. Suchtrademarks may not be used to endorse or promote any product unlessexpressly permitted under separate agreement with Adobe.
5. TERM
Your rights under this Agreement shall terminate if you fail to complywith any of the material terms or conditions of this Agreement and do
not cure such failure in a reasonable period of time after becomingaware of such noncompliance. If all your rights under this Agreementterminate, you agree to cease use and distribution of the Software and
Documentation as soon as reasonably practicable.
6. GOVERNING LAW AND JURISDICTION.
This Agreement is governed by the statutes and laws of the State ofCalifornia, without regard to the conflicts of law principles thereof. If
any part of this Agreement is found void and unenforceable, it will not
affect the validity of the balance of the Agreement, which shall remainvalid and enforceable according to its terms. Any dispute arising out ofor related to this Agreement shall be brought in the courts of Santa
Clara County, California, USA.
7. GENERAL
You acknowledge that you have read this Agreement, understand it,
and that it is the complete and exclusive statement of your agreement
with Adobe which supersedes any prior agreement, oral or written, between Adobe and you with respect to the licensing to you of the
Software and Documentation. No variation of the terms of this
Agreement will be enforceable against Adobe unless Adobe gives itsexpress consent in writing signed by an authorized signatory of Adobe.
Little CMS
Copyright © 1998-2007 Marti Maria
Permission is hereby granted, free of charge, to any person obtaining acopy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, includingwithout limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to permit
persons to whom the Software is furnished to do so, subject to thefollowing conditions:
The above copyright notice and this permission notice shall beincluded in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 8/31
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSEAND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANYCLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN ANACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWAREOR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
OpenSSL Combined License
Copyright © 1995-1998 Eric Young ([email protected]). All rightsreserved.
This package is an SSL implementation written by Eric Young([email protected]).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as
the following conditions are adhered to. The following conditionsapply to all code found in this distribution, be it the RC4, RSA, lhash,
DES, etc., code; not just the SSL code. The SSL documentationincluded with this distribution is covered by the same copyright termsexcept that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Young's, and as such any Copyright notices inthe code are not to be removed. If this package is used in a product,
Eric Young should be given attribution as the author of the parts of thelibrary used. This can be in the form of a textual message at program
startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or withoutmodification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain the copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the abovecopyright notice, this list of conditions and the followingdisclaimer in the documentation and/or other materials provided
with the distribution.
3. All advertising materials mentioning features or use of thissoftware must display the following acknowledgement:
"This product includes cryptographic software written by Eric Young
The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative
thereof) from the apps directory (application code) you mustinclude an acknowledgement:
"This product includes software written by Tim Hudson([email protected])"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' ANDANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULARPURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, ORCONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANY THEORYOF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
The license and distribution terms for any publically available version
or derivative of this code cannot be changed. i.e. this code cannot
simply be copied and put under another distribution license [includingthe GNU Public License.].
OpenGL Extension Wrangler Library License
The OpenGL Extension Wrangler Library.
Copyright © 2002-2007, Milan Ikits <milan ikits[]ieee org>.
Copyright © 2002-2007, Marcelo E. Magallon <mmagallo[]debian
org>.
Copyright © 2002, Lev Povalahev.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions aremet:
Redistributions of source code must retain the above
copyright notice, this list of conditions and the followingdisclaimer.
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the followingdisclaimer in the documentation and/or other materials
provided with the distribution.
The name of the author may be used to endorse or promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESSOR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITEDTO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE AREDISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOTLIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 9/31
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OFSUCH DAMAGE.
Mesa 3-D graphics library
Version: 7.0
Copyright © 1999-2007 Brian Paul. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining acopy of this software and associated documentation files (the"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to thefollowing conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITED TO THE WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NONINFRINGEMENT. IN NO EVENT SHALL BRIANPAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORTOR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHERDEALINGS IN THE SOFTWARE.
Copyright © 2007 The Khronos Group Inc.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and/or associated documentation files (the"Materials"), to deal in the Materials without restriction, includingwithout limitation the rights to use, copy, modify, merge, publish,distribute, sublicense, and/or sell copies of the Materials, and to permit
persons to whom the Materials are furnished to do so, subject to thefollowing conditions:
The above copyright notice and this permission notice shall beincluded in all copies or substantial portions of the Materials.
THE MATERIALS ARE PROVIDED "AS IS", WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSEAND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE MATERIALS
OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
Terms for Included Open
Source SoftwareThis SAP software contains also the third party open source software
products listed below. note that for these third party products the
following special terms and conditions shall apply.
1. This software was developed using ANTLR.
2. gSOAP
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2004 Robert A.
van Engelen, Genivia inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED
BY GENIVIA INC AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
3. SAP License Agreement for STLport SAP License Agreement for
STLPort between SAP Aktiengesellschaft Systems, Applications,
Products in Data Processing Neurottstrasse 16 69190 Walldorf,
Germany (hereinafter: SAP) and you (hereinafter: Customer)a) Subject Matter of the Agreement
A) SAP grants Customer a non-exclusive, non-transferrable, royalty-
free license to use the STLport.org C++ library (STLport) and its
documentation without fee.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 10/31
B) By downloading, using, or copying STLport or any portion thereof
Customer agrees to abide by the intellectual property laws, and to all
of the terms and conditions of this Agreement.
C) The Customer may distribute binaries compiled with STLport
(whether original or modified) without any royalties or restrictions.
D) Customer shall maintain the following copyright and permissions
notices on STLport sources and its documentation unchanged:
Copyright 2001 SAP AG
E) The Customer may distribute original or modified STLport sources,
provided that:
o The conditions indicated in the above permissions notice are met;
o The following copyright notices are retained when present, and
conditions provided in accompanying permission notices are met:
Copyright 1994 Hewlett-Packard
Company
Copyright 1996,97 Silicon Graphics
Computer Systems Inc.
Copyright 1997 Moscow Center for
SPARC Technology.
Copyright 1999,2000 Boris Fomitchev
Copyright 2001 SAP AG
Permission to use, copy, modify, distribute and sell this software and
its documentation for any purposes is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation. Hewlett-Packard Company makes no
representations about the suitability of this software for any purpose.
It is provided “as is” without express or implied warranty.
Permission to use, copy, modify, distribute and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation. Silicon Graphics makes no representations
about the suitability of this software for any purpose. It is provided “as
is” without express or implied warranty.
Permission to use, copy, modify, distribute and sell this software and
its documentation for any purposes is hereby granted without fee, provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation. Moscow Center for SPARC makes no
representations about the suitability of this software for any purpose. It
is provided “as is” without express or implied warranty.
Boris Fomitchev makes no representations about the suitability of this
software for any purpose. This material is provided "as is", with
absolutely no warranty expressed or implied.
Any use is at your own risk. Permission to use or copy this software
for any purpose is hereby granted without fee, provided the above
notices are retained on all copies.
Permission to modify the code and to distribute modified code is
granted, provided the above notices are retained, and a notice that the
code was modified is included with the above copyright notice.
Permission to use, copy, modify, distribute and sell this software and
its documentation for any purposes is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation. SAP makes no representations about the
suitability of this software for any purpose. It is provided with a
limited warranty and liability as set forth in the License Agreement
distributed with this copy.
SAP offers this liability and warranty obligations only towards its
customers and only referring to its modifications.
b) Support and Maintenance SAP does not provide software
maintenance for the STLport. Software maintenance of the STLport
therefore shall be not included.
All other services shall be charged according to the rates for services
quoted in the SAP List of Prices and Conditions and shall be subject to
a separate contract.
c) Exclusion of warranty
As the STLport is transferred to the Customer on a loan basis and free
of charge, SAP cannot guarantee that the STLport is error-free,
without material defects or suitable for a specific application under
third-party rights. Technical data, sales brochures, advertising text and
quality descriptions produced by SAP do not indicate any assurance of
particular attributes.
d) Limited Liability
A) Irrespective of the legal reasons, SAP shall only be liable for
damage, including unauthorized operation, if this (i) can be
compensated under the Product Liability Act or (ii) if caused due to
gross negligence or intent by SAP or (iii) if based on the failure of aguaranteed attribute.
B) If SAP is liable for gross negligence or intent caused by employees
who are neither agents or managerial employees of SAP, the total
liability for such damage and a maximum limit on the scope of any
such damage shall depend on the extent to which its occurrence ought
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 11/31
to have anticipated by SAP when concluding the contract, due to the
circumstances known to it at that point in time representing a typical
transfer of the software.
C) In the case of Art. 4.2 above, SAP shall not be liable for indirect
damage, consequential damage caused by a defect or lost profit.
D) SAP and the Customer agree that the typical foreseeable extent of
damage shall under no circumstances exceed EUR 5,000.
E) The Customer shall take adequate measures for the protection of
data and programs, in particular by making backup copies at the
minimum intervals recommended by SAP. SAP shall not be liable for
the loss of data and its recovery, notwithstanding the other limitations
of the present Art. 4 if this loss could have been avoided by observing
this obligation.
F) The exclusion or the limitation of claims in accordance with the
present Art. 4 includes claims against employees or agents of SAP.
4. Adobe Document Services Adobe, the Adobe logo, Acrobat,
PostScript, and Reader are either registered trademarks or trademarks
of Adobe Systems Incorporated in the United States and / or other
countries. For information on Third Party software delivered with
Adobe document services and Adobe LiveCycle Designer, see SAP
Note 854621.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 12/31
Typographic Conventions
Type Style Description
Example Text Words or characters quoted fromthe screen. These include fieldnames, screen titles,pushbuttons labels, menunames, menu paths, and menuoptions.
Cross-references to otherdocumentation
Example text Emphasized words or phrases inbody text, graphic titles, andtable titles
EXAMPLE TEXT Technical names of systemobjects. These include reportnames, program names,transaction codes, table names,and key concepts of aprogramming language whenthey are surrounded by bodytext, for example, SELECT andINCLUDE.
Example text Output on the screen. Thisincludes file and directory namesand their paths, messages,names of variables andparameters, source text, andnames of installation, upgradeand database tools.
Example text Exact user entry. These arewords or characters that youenter in the system exactly as
they appear in thedocumentation.
<Example text> Variable user entry. Anglebrackets indicate that youreplace these words andcharacters with appropriateentries to make entries in thesystem.
EXAMPLE TEXT Keys on the keyboard, for
example, F2 or ENTER.
Icons
Icon Meaning
Caution
Example
Note
Recommendation
Syntax
Additional icons are used in SAP Librarydocumentation to help you identify differenttypes of information at a glance. For more
information, see Help on Help GeneralInformation Classes and Information Classesfor Business Information Warehouse on thefirst page of any version of SAP Library .
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 13/31
Administrator’s Guide for SAP Visual Enterprise Viewer 7.1
July, 2013 13
History of Changes
Caution
Before you start the implementation, make sure you have the latest version of this document.You can find the latest version at the following location: http://service.sap.com/instguides.
The following table provides an overview of the most important document changes:
Version Description
1.0 (November 2012) First version
1.1 (May 2013) The Security Information section wasupdated.
1.2 (July 2013) The SAP Visual Enterprise ViewerDashboards 4 Add-On v2.0 section wasupdated.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 14/31
Administrator’s Guide for SAP Visual Enterprise Viewer 7.1
14 July, 2013
Contents
1. Getting Started ........................................................................ 15 1.1 About this Document ..................................................................... 15
1.1.1 Purpose .............................................................................................. 15 1.2 SAP Notes for the Installation ....................................................... 16 1.3 Information Available in SAP Service Marketplace .................... 16
2. SAP Visual Enterprise Viewer 7.1 .......................................... 18 2.1 System Landscape......................................................................... 18 2.2 Overall Implementation Sequence ............................................... 18
3. Installation Information .......................................................... 19 3.1 Installing the Software ................................................................... 19 3.2 Optional Modules ........................................................................... 20
3.2.1 ECAD Module ..................................................................................... 20 3.2.2 XMetaL with SAP Visual Enterprise Viewer .................................... 20
3.3 Post-Installation ............................................................................. 21 4. Operation Information ............................................................ 22
4.1 Trace and Log Files ....................................................................... 22 5. Security Information ............................................................... 23
5.1 Sandbox .......................................................................................... 23 5.2 URL Redirect Protection ................................................................ 24
6. Technical System Landscape ................................................ 27 6.1 Supported Operating Systems ..................................................... 27 6.2 Hardware Configuration ................................................................ 27 6.3 Additional Requirements ............................................................... 27
7. Upgrade Information ............................................................... 28 8. SAP Visual Enterprise Viewer Dashboards 4 Add-On v2.0 .. 29
8.1 Introduction .................................................................................... 29 8.2 Installing the Add-on ..................................................................... 31
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 15/31
Getting Started
July, 2013 15
1. Getting Started
1.1 About this Document
1.1.1 PurposeThis Administration Guide is the central source of information for the technical implementation ofSAP Visual Enterprise Viewer. It provides cross-scenario implementation information as well asscenario-specific information.
You can use the Administrator’s Guide to get an overview of SAP Visual Enterprise Viewer andits software units from a technical perspective. The Administration Guide is a planning tool thathelps you to design your system landscape and it refers you to the detailed documentation thatis required, mainly:
Installation guides for single software units
SAP Notes
Configuration documentation
SAP Library documentation
This Administration Guide is a single source of information for the documentation that isavailable to support the installation and operation of SAP Visual Enterprise Viewer. Therefore,this Guide contains all of the following:
Installation Information
This chapter gives you an overview of the installation components and the sequence inwhich they are installed.
Security Information
This chapter provides you with the information that you require to operate SAP VisualEnterprise Viewer securely.
Upgrade Information
This chapter provides you with the latest upgrade information.
Note
You can find the most current version of this document on SAPService Marketplace at:
http://service.sap.com/instguides
We strongly recommend that you use the document availablethere. The guide will be updated according to updates of thesoftware.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 16/31
Getting Started
16 July, 2013
1.2 SAP Notes for the InstallationYou must read the following SAP Notes before you start the installation. These SAP Notes
contain the most recent information on the installation, as well as corrections to the installation
documentation.Make sure that you have the up-to-date version of each SAP Note, which you can find in theSAP Service Marketplace at the Internet address:
service.sap.com/notes .
SAP NoteNumber
Title Description
1686138 Customer and Partner License keys forSAP Visual Enterprise
ECAD - process to request apermanent license key
1701382 ECAD Module for Deep View 6.3.14 ECAD - for users with DeepView 6.3.14
1701381 ECAD Module for SAP VisualEnterprise Viewer 7.0
ECAD - for users with SAPVisual Enterprise Viewer 7.0
1787261 SAP Visual Enterprise 7.1: Correctionsto Online Documents
Applicable changes to onlinedocuments post release
1.3 Information Available in SAP ServiceMarketplaceInformation on the following areas is available in the SAP Service Marketplace.
Documentation
Description Internet Address Title
Application Help forSAP VisualEnterprise Viewer
http://help.sap.com/ SAP Business Suite –
Additional Applications – SAP Visual Enterprise – SAP Visual Enterprise Viewer – SAP VisualEnterprise Viewer 7.1
Application Help forSAP VisualEnterprise Viewer
SAP VisualEnterprise Viewerfor iPad
http://service.sap.com/instguides/SAP Mobile Applications/SAP BusinessSuite/SAP Visual Enterprise
SAP VisualEnterprise Viewerfor iPad Administrator’sGuide
SAP Visual
Enterprise Author
http://service.sap.com/instguides /SAP
Business Suite Applications –> SAP VisualEnterprise
SAP Visual
Enterprise Author Administrator’sGuide
SAP VisualEnterpriseGenerator
http://service.sap.com/instguides /SAP
Business Suite Applications –> SAP VisualEnterprise
SAP VisualEnterpriseGenerator Administrator’sGuide
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 17/31
Getting Started
July, 2013 17
General Quick Links
Description Internet Address Title
SAP Notes service.sap.com/notes –
Released platforms service.sap.com/platforms –
System sizing service.sap.com/sizing Quick Sizer tool
Front-end installation service.sap.com/instguides Front End InstallationGuide
Security service.sap.com/security –
Information about creatingerror messages
service.sap.com/messages _
SAP Software DistributionCenter (software downloadand ordering of software)
service.sap.com/swdc _
SAP Product AvailabilityMatrix
service.sap.com/PAM _
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 18/31
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 19/31
Installation Information
July, 2013 19
3. Installation InformationSAP Visual Enterprise Viewer 7.1 is installed directly onto your desktop, with no reliance on anyother software or hardware.
3.1 Installing the Software
Use
This topic describes the process for installing SAP Visual Enterprise Viewer on your computer.
Procedure
1. Close all applications on the computer.
2. Navigate to, and double-click the VisualEnterpriseViewer_xx.exe file (where 'xx’ is
the version number), file in Windows Explorer.
3. Choose Next when the installer starts. The Front-End Installer screen is displayed.
4. Select the SAP Visual Enterprise Viewer 7.1 checkbox to install, and choose Next to selectan install location.
5. Do one of the following:
Accept the default location in which to install SAP Visual Enterprise Viewer.
Click Browse, navigate to and select the installation folder you require.
6. Choose Next to start the installation.
Important Note: The installer firstly performs a check forprevious versions of the software, and if detected, the previousversion of SAP Visual Enterprise Viewer is uninstalled.
7. Choose Close when the installation is complete.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 20/31
Installation Information
20 July, 2013
3.2 Optional Modules
3.2.1 ECAD ModuleThis optional licensed module is an extension to SAP Visual Enterprise Viewer that supports thefollowing ECAD file types:
GenCAD (.cad).
GenCAM (.gcm, .a3p) .
ODB++ (.odb) .
Offspring (.cvg) .
To view these file types, you must download and install the correct version of the ECADextension to match your installed Viewer. The module includes a 30 day temporary licenseduring which full functionality is supported.
NoteRefer to the SAP Product Availability Matrix at
service.sap.com/PAM for the latest supported versions,
and the SAP note that applies to your installation.
3.2.1.1 Installing the ECAD module:Double-click the *.msi to launch the module installer, and choose Next to install the module.
Note
If SAP Visual Enterprise Viewer is not installed, a messagedisplays, and module installation is discontinued.
3.2.1.2 Activating the ECAD module:1. Launch SAP Visual Enterprise Viewer, and choose Help Module Activation to display
the Module Activation window.
2. Copy the Serial Key, and double-click the Serial Key field. Paste the key into the field, thencopy the Authorization Code and double-click the Authorization Code field. Paste the codeinto the field.
3. Choose OK and restart SAP Visual Enterprise Viewer to complete activation.
3.2.2 XMetaL with SAP Visual Enterprise ViewerXMetaL Author Enterprise is an application used to create xml documents. The DITA standard
for xml authoring is implemented, and SAP Visual Enterprise Viewer is embedded into DITAHTML output. This is a technical writer/technical illustrator workflow.
Technical writers using XMetaL can reference 3D content in their DITA compliant output usingSAP Visual Enterprise Viewer. You can create links to model views and steps within SAP VisualEnterprise Viewer.
Once the content is complete, XML can be output from XMetaL to html cross-referenced rh file.
There are two applications that must be installed in order to use this functionality. These are:
XMetaL Author Enterprise Edition.
SAP Visual Enterprise Viewer.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 21/31
Installation Information
July, 2013 21
If SAP Visual Enterprise Viewer was installed prior to installing XMetaL, you need to run SAPVisual Enterprise Viewer and install the DITA authoring plugin. The XMetaL Author InstallationDetected window appears:
Note
The XMetaL DITA authoring plugin is already installed ifXMetaL Author Enterprise was installed before SAP VisualEnterprise Viewer.
3.2.2.1 Setting the Default Deliverable Type forPreviewing Topics and DITA Maps in XMetaL:1. Launch XMetaL Author, and from the menu, choose Tools Configure Output .
2. Switch to the Preview tab, and assign SAP Visual Enterprise Viewer DITA Output to the twoPreview settings so that previewing will use the correct deliverable type in both previewingtopics and previewing DITA maps.
You can now begin using SAP Visual Enterprise Viewer with XMetaL Author.
3.3 Post-InstallationThese are the post-installation steps that are specific for SAP Visual Enterprise Viewer.
Creating .rh files in SAP Visual Enterprise Author for use with SAP Visual Enterprise Viewer
Load the required files into SAP Visual Enterprise Author, create any required additionalcontent, and use the Save As functionality to save as .rh files.
Creating .rh files in Visual Enterprise Generator for use with SAP Visual Enterprise Viewer
1. If you are using SAP Visual Enterprise Generator, this can be used to produce .rh usingbatch processing. The creation of .rh files is an out-of-the-box workflow that can be
configured to produce .rh derivatives. This can also be configured as an auto translation onchecking into SAP DMS.
2. Configure and run the SAP Visual Enterprise Generator process to produce .rh files. Forfurther information on creating .rh derivatives, refer to the "Configuring Derivatives" sectionof the application help on the SAP Help Portal (http://help.sap.com/) for SAP Visual
Enterprise Generator.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 22/31
Operation Information
22 July, 2013
4. Operation Information
4.1 Trace and Log FilesTrace files and log files are essential for analyzing problems. Log files contain details of errorsthat occur during a working session. These errors can be interrogated with the log viewer.
Important Log and Trace files for component SAP Visual Enterprise Viewer
Component Content File Path
SAP VisualEnterprise Viewer
Systemprocesses,memory state
SAP VisualEnterprise Viewer7.1.log
%Temp%\Low\SAP\SAPVisual Enterprise Viewer7.1
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 23/31
Security Information
July, 2013 23
5. Security Information
5.1 SandboxSome of SAP Visual Enterprise Viewer‘s supported file formats use third party libraries overwhich there is little control in terms of security. This means that vulnerabilities in third partycode, encountered when processing corrupt data from an external, untrusted source, mightpose security issues and compromise SAP products.
Sandboxing provides guarantees about what a piece of code can or cannot do, no matter whatthe inputs. Sandboxing leverages the operating system-provided security to allow codeexecution that cannot make persistent changes to the computer or access information that isconfidential. The architecture and exact assurances that the sandbox provides are dependenton the operating system.
Security through sandboxing is achieved by granting the sandboxed code the least possibleaccess rights and privileges, ensuring that it works in accordance with a predefined set of rules.
The collection of rules that any code running in the Sandbox must obey is called a Policy, andno other system resources beyond those defined in the policy can be accessed or operated onfrom within the sandbox.
Use
The Sandbox for plug-ins feature is found under either the menu Edit Preferences Security Configuration tab, or context menu Preferences Settings SecurityConfiguration tab. Sandboxing leverages the OS-provided security to allow code execution that
cannot make persistent changes to the computer or access information that is confidential. Thearchitecture and exact assurances that the sandbox provides are dependent on the operatingsystem.
The Sandbox for plug-ins feature also supports the Group Policy option. Using this, the network
administrator can set a maximum security level and prevent users from changing it. This feature(sandbox handling) is implemented over registry, and is version dependent. The Group Policywrites to the registry and SAP Visual Enterprise Viewer uses it to enable or disable sandboxsettings.
The adm file is located at:
SAP Visual Enterprise Viewer 7.1\ Group Policies\Sandbox.adm.
Prerequisites
You have:
A Windows Server setup with a domain
Full administrative rights to that server SAP Visual Enterprise Viewer already installed
Procedure
Installing the SAP Visual Enterprise Viewer Group Policy "SandBox.adm"
1. Log into the domain server with full administrative rights.
2. Copy the file Sandbox.adm from the installation folder of SAP Visual Enterprise Viewer,
and paste into a location in the domain server for installation.
3. From the Windows Start Menu, choose Administrative Tools Group PolicyManagement .
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 24/31
Security Information
24 July, 2013
4. In the Group Policy Management tree, right click Group Policy Objects and choose New .
Give the group policy a name; for example, <SAP Group Policy> . The newly added
group policy displays under the group policy objects.
5. Select the newly created policy object, right-click and choose Edit to display the Group
Policy Object Editor window.6. From the User Configuration folder, right-click Administrative Templates, select
Add/Remove Templates, and choose Add .
7. Browse for the file Sandbox.adm that you have transferred across to the domain server,
and open it.
8. Choose Close to apply the changes. A folder entitled "SAP Visual Enterprise" displays in
the administrative templates. In that folder, double click the Sandbox item to display the
sandbox properties.
9. Close the Group Policy Object Editor window to return to the Group Policy Management
window. Right click the domain to which you want to apply the group policy, and chooseLink an Existing GPO.
10. In the Select GPO, under Group Policy Objects, the group policy object is displayed.
11. Login and run SAP Visual Enterprise Viewer. Check whether the changes in group policydisplay in the SAP Visual Enterprise Viewer settings.
Note
You must login again to see the updates. This is based on howgroup policy update is configured.
5.2 URL Redirect Protection
SAP Visual Enterprise Viewer can be embedded in a variety of hosting applications. One of themain usages is web applications using SAP Visual Enterprise Viewer to open online files.
Viewer achieves this by accepting an URL pointing to an online resource, managing thedownloading process and displaying the content to the user. When an application sends rogueURL to SAP Visual Enterprise Viewer, which contains a redirection directive to an unsafedomain, it might pose security issues and compromise SAP products.
The URL Redirect Protection feature provides defence to make sure URLs redirected to anunknown domain will not be loaded. First, redirecting to the same domain as the source URLwill always be allowed. Second, redirecting to a domain that matches an entry in the white listwill also be allowed. All other redirections will be denied. In case of nested redirection, SAPVisual Enterprise Viewer allows up to 8 levels of redirection in one URL access. Any moreredirection request will be denied.
The URL Redirect Protection main switch and the white list can be set by user. However thissetting can be overridden when there is Group Policy applied by administrator.
When the administrator enables URL Redirect Protection, an entry is required in the whitelistbefore the setting can be applied. The entry does not have to be a valid URL. To stop allredirection, administrator chooses Enable Redirect Protection and enters some text in thewhitelist. That allows the administrator to apply the setting.
Use
The URL Redirect Protection settings located under either the menu Edit Preferences
Security Configuration tab, or context menu Preferences Settings SecurityConfiguration tab. The URL Redirect Protection main switch dictates whether SAP Visual
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 25/31
Security Information
July, 2013 25
Enterprise Viewer will apply this protection. The white list is a flat list containing URLs that canbe redirected when the protection is enabled. This white list is user-editable.
The URL Redirect Protection also supports the Group Policy option. Using this, the network
administrator can set a maximum security level and prevent users from changing it. The GroupPolicy script file (.adm) is located at: SAP Visual Enterprise Viewer 7.1\GroupPolicies\URLRedirect.adm
Prerequisities
You have:
A Windows Server setup with a domain
Full administrative rights to that server
SAP Visual Enterprise Viewer already installed
Procedure
Installing the SAP Visual Enterprise Viewer Group Policy “URLRedirect.adm”
1. Log into the domain server with full administrative rights.
2. Copy the file URLRedirect.adm from the installation folder of SAP Visual Enterprise
Viewer, and paste into a location in the domain server for installation.
3. From the Windows Start Menu, choose Administrative Tools Group Policy
Management .
4. In the Group Policy Management tree, right click Group Policy Objects and chooseNew . Give the group policy a name; for example, SAP Group Policy . The newly added
group policy displays under the group policy objects.
5. Select the newly created policy object, right-click and choose Edit to display the GroupPolicy Object Editor window.
6. From the User Configuration folder, right-click Administrative Templates, select Add/Remove Templates, and choose Add .
7. Browse for the file URLRedirect.adm that you have transferred across to the domain
server, and open it.
8. Choose Close to apply the changes. A folder SAP Visual Enterprise displays in theadministrative templates. In that folder, double click the URL Redirect item to displaythe URL Redirect Protection properties.
9. Close the Group Policy Object Editor window to return to the Group Policy Management
window. Right click the domain to which you want to apply the group policy, and chooseLink an Existing GPO.
10. In the Select GPO, under Group Policy Objects, the group policy object is displayed.
11. Login and run SAP Visual Enterprise Viewer. Check whether the changes in grouppolicy display in the SAP Visual Enterprise Viewer settings.
Note
You must login again to see the updates. This is based on how group policy update isconfigured.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 26/31
Security Information
26 July, 2013
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 27/31
Technical System Landscape
July, 2013 27
6. Technical System Landscape
6.1 Supported Operating SystemsSAP Visual Enterprise Viewer can run on three supported operating systems. These are:
Windows XP (SP3 32) and 64 - note that there is no SP3 for x64 operating system.
Vista (32 and 64).
Windows 7 (32 and 64).
The recommended Operating System is:
Windows 7 (32 and 64).
6.2 Hardware ConfigurationThe minimum configuration for SAP Visual Enterprise Viewer is:
Pentium 4 1Ghz processor or higher
512MB of RAM (more for large model and texture sizes)
Graphics card with the latest drivers,128MB of RAM and support for DirectX or OpenGL.
The recommended configuration for SAP Visual Enterprise Viewer is:
Pentium 4, 2Ghz processor or higher
3GB of RAM (more for large model and texture sizes)
Graphics card with the latest drivers, 512MB of RAM and support for DirectX or OpenGL.
6.3 Additional RequirementsThere are a number of additional requirements, depending on the way in which you use SAPVisual Enterprise Viewer:
Authoring DITA Compliant XML
XMetaL Author 6.0 Enterprise or later
Publishing to Office Documents
Microsoft Office for Windows 2003 or later (32-bit ONLY).
HTML viewing
Internet Explorer 7 and 8
Firefox 3.6 or later
Chrome 4 or later
Important Note relating to Chrome 20: Chrome 20 and Flextemplates will not load files from the local disk because thesecannot be set as a trusted location. File loading needs to takeplace from the URL on the web server.
Visual Compare
Graphics Card which supports Direct X 9 and Shader Model 2
HDR Renderer
Graphics Card which supports OpenGL 2.0 and Shader Model 3.0
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 28/31
Upgrade Information
28 July, 2013
7. Upgrade InformationFor upgrading, when you install SAP Visual Enterprise Viewer 7.1, any previous versions ofViewer are uninstalled.
For regularly updated release and upgrade information, see the SAP Notes atservice.sap.com/notes .
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 29/31
SAP Visual Enterprise Viewer Dashboards 4 Add-On v2.0
July, 2013 29
8. SAP Visual Enterprise ViewerDashboards 4 Add-On v2.0
8.1 Introduction
SAP Visual Enterprise Viewer Dashboards 4 Add-On v2.0 is an Add-On for SAP
Dashboards 4.1 that contains a 3D Viewer2 component. The 3D Viewer2 component
provides 3D model viewing and 3D analytics capabilities using SAP Visual Enterprise
Viewer.
The 3D Viewer2 component allows 3D models to be displayed in HTML output
produced by exporting to HTML (with Flash). Dashboards allow exporting to various
types of output file, but exporting to HTML is the only option that works when a 3DViewer2 component is used in a dashboard.
The 3D Viewer2 component must run inside an HTML page in order to allow an
ActiveX control to be used in a Dashboards application implemented in Adobe Flex.
Note that 3D Viewer2 components do not work in the Dashboards preview.
Caution
Two SAP Visual Enterprise Viewer Add-ons in the same published Dashboard is not asupported configuration. The SAP Visual Enterprise Viewer Dashboards 4 Add-on fullysupports having both v1 and v2 add-ons loaded in the same design session but adesigner is expected to configure a Dashboard using one add-on.
You can use the 3D Viewer2 component to do the following:
Visual Indexing
Selecting objects in a 3D scene in order to view or use business data related to
the selected objects
Painting
Modifying the appearance of objects in a 3D scene using a set of rules that are
applied to business data associated with the objects in the scene
Model Views
Selecting views embedded in 3D models in order to select a particular scene
Steps
Playing step animations embedded in 3D models
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 30/31
SAP Visual Enterprise Viewer Dashboards 4 Add-On v2.0
30 July, 2013
Queries
Running SAP Visual Enterprise queries against the loaded 3D models
For more information, see http://help.sap.com/ SAP Business Suite – Additional
Applications – SAP Visual Enterprise – SAP Visual Enterprise Viewer - Analytics 3D Add-On forDashboards – SAP Visual Enterprise Viewer - Analytics 3D Add-On for Dashboards 7.1
Note
This chapter assumes the user has basic knowledge ofcreating Dashboards and using SAP Visual Enterprise Viewer.
8/13/2019 Admin Guide Ve Viewer
http://slidepdf.com/reader/full/admin-guide-ve-viewer 31/31
SAP Visual Enterprise Viewer Dashboards 4 Add-On v2.0
8.2 Installing the Add-onInstalling SAP Visual Enterprise Viewer Dashboards 4 Add-On v2.0 is done through the file
management option in Dashboards. This installs a further component labeled 3D Viewer, which
allows you to add and configure a 3D viewport.
Prerequisites
As a designer, you have installed the following:
Office 2010
Dashboards 4.1 (version 14.1.0.41 or greater)
SAP Visual Enterprise Viewer Dashboards 4 Add-On v2.0
Internet Explorer 8 or IE 9 or Firefox 4+
Adobe Flash 10 or above
Windows 7
SAP Visual Enterprise Viewer 7.1 (SP 1 or greater) As a runtime user, you have installed the following:
Internet Explorer 8 or IE 9 or Firefox 4+
Adobe Flash 10 or above
Windows 7 or XP
SAP Visual Enterprise Viewer 7.1 (SP 1 or greater)
Procedure
Installing the SAP Visual Enterprise Viewer Dashboards 4 Add-On v2.0
1. Open the Dashboard Designer, and choose Blank Model to open a blank dashboard.
2. From the Dashboard Designer, choose File Manage Add-Ons . The Add-On
Manager window displays.
3. Choose Install Add-On, browse to new SAP Visual Enterprise Viewer Dashboards 4.0 Add-On v2.0 and click Open.
4. Open Dashboards and choose File New New to open a blank dashboard.
5. In Dashboards, choose File Manage Add-Ons .
6. Click Install Add-On, browse to the location of the .xlx file for the SAP VE Viewer
Dashboards 4 Add-On v2.0 and click Open. The Add-On Manager dialog shows that theSAP Visual Enterprise Dashboards 4 Add-On v2.0 has been installed.