4
DIAPHRAGM PUMPS • Technical-Commercial Training ADVANCED FLUID MANAGEMENT SOLUTIONS ADVANCED FLUID MANAGEMENT SOLUTIONS 5 ANNI DI GARANZIA Made In Italy 5 YEARS WARRANTY Made In Italy
DIAPHRAGM PUMPS • Technical-Commercial Training
ADVANCED FLUIDMANAGEMENT SOLUTIONS
ADVANCED FLUIDMANAGEMENT SOLUTIONS
5 ANNI DIGARANZIA
MadeIn Italy
5YEARSWARRANTY
MadeIn Italy
Complete range of materials suitable for use with very many fluids
Versions available with larger inlet to improve aspiration efficiency
100% maintainable with special kits to last a lifetime
COMMERCIAL ADVANTAGES
1800
1600
1200
1000
800
600
400
1800
1600
1200
1000
800
600
400
1800
1600
1200
1000
800
600
400
Tested one by one to last for decades
Diaphragm pumps
examples of use
Chemicals
Industry
Automotive
Cleaning
sectors of use
TRANFER OF FLUIDS IN LARGE INDUSTRIES AND WORKSHOPS
SLIP PUMPING IN THE CERAMICS INDUSTRY
WATER PUMPING IN THE MARBLE INDUSTRY
LUBRICANT PUMPING IN THE OIL AND MINING INDUSTRIES
5 ANNI DIGARANZIA
MadeIn Italy
5YEARSWARRANTY
MadeIn Italy
+ productive for + time
TECHNICAL ADVANTAGES
Compliant with the standard Atex 94 II 3 GD c T XFor explosive environments
Max pressure 8 bar
Noise 75 dB
Ball valves in aspiration and output
Compression ratio 1:1
• Usable with potentially explosive atmospheres thanks to ATEX certification.• 1/2” pump with AISI 316 stainless steel ring reinforcing the thread.• Seats and balls in AISI 316 stainless steel and polypropylene (depending on the model).
DIAPHRAGM PUMPS made of aluminium and polypropylene
Why choose a pump with polypropylene flange and aluminium motor?The aluminium and polypropylene pumps are indicated for uses with difficult applications such as in environments with high humidity, with potentially explosive atmospheres and with corrosive and aggressive liquids.
Compliant with the standard Atex 94/9 II 2 GD c IIB T4 XFor explosive environments
Max pressure 8 bar
Noise 75÷82 dB
Ball valves in aspiration and output
Compression ratio 1:1
• Usable with potentially explosive atmospheres thanks to ATEX certification.• In the event of running empty they do not suffer damage.• Self-priming capability.
DIAPHRAGM PUMPS made of aluminium
Why choose an aluminium diaphragm pump?These pumps are designed and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension.
Max pressure 8 bar
Noise 75÷78 dB
Ball valves in aspiration and output
Compression ratio 1:1
• Usable in corrosive environments and with corrosive aqueous solutions.• Higher quality thanks to stainless steel screws.• 1/2” pump with AISI 316 stainless steel ring reinforcing the thread.
DIAPHRAGM PUMPS made of polypropylene
Why choose a polypropylene diaphragm pump?The pneumatic pumps made entirely of polypropylene with a double RAASM diaphragm are made to work in particularly aggressive working atmospheres, with a vast range of fluids including corrosive ones, with high viscosity and solid parts in suspension.
strong points
Scan to download the catalogue
Scan to download the catalogue
WR
PB
LPM
WM
2016
-GB
ADVANCED FLUID MANAGEMENT SOLUTIONStechnology, quality, efficiency
CATALOGUES AVAILABLE:
RAASM S.p.A.36022 S. ZENO DI CASSOLA (VI)Via Marangoni, 33 - ITALY
Export departmentTel. +39 0424 571 130 - Fax 0424 571 135
Technical departmentTel. +39 0424 571 150 - Fax 0424 571 155
www.raasm.com
No. 404-M Diaphragm pumps
No. 404-PPB Diaphragm pumps made entirely of polypropylene
RAASM offers a complete range of fluid management solutions
suitable for many different sectors of use. Our success is founded
on the ability to identify and satisfy the specific needs of our
customers.
To offer high-quality products is one of our main objectives.
Specific and rigorous tests accompany every single stage of
the production process.
The stage of researching and developing cutting-edge solutions carried out completely in Italy is the starting point for the entire
production cycle.
