20
ADVANCED WHEEL ALIGNMENT SYSTEMS
ADVANCED WHEEL ALIGNMENT SYSTEMS
2
Pro
-Align
Pro
du
cts
and
Ser
vice
s
ContentsProducts and Services
Contents Page
WHEEL ALIGNERS 4-10
l Hunter WA Series Alignerl Hunter 100 Alignerl Hunter Alignment Sensors
DSP700 Series - Conventional Sensors
Hunter Elite TD Sensors
HawkEyeTM HD - Imaging Sensors
HawkEye HexTM - 2 Camera ‘Special’
HawkEye HexTM - 4 Camera
l Hunter Homologated and Approved Systemsl Wheel Alignment Software and Accessories
ShopResults.net
WinAlign TunerTM
CodeLinkTM
Hunter Wheel Clamp Options
BALANCERS 11-14
l Hunter Road Force Balancer GSP9700l Balancer Software
Radial Force Measurement and Forcematching
StraightTrakTM - Lateral Force Measurement
SmartWeightTM - Wheel Balancing
l Hunter GSP9200
TYRE CHANGERS 15-16
l Hunter Tyre Changers
Auto34
TCX575
TCX550
TCX525
ALIGNMENT LIFTS 17-18
l Scissor Wheel Alignment Liftsl Four Post Wheel Alignment Lifts
TRAINING AND AFTERSALES SUPPORT 19
l Trainingl Aftersales and Helpline Support
3
VIDEO
Pro
-Alig
nPro
du
cts and
Services
The Company Pro-Align has become ‘the name’ in wheel alignment. As the UK’s leaders andspecialists in the field, we have, over two decades, established and maintained ourreputation through our unrivalled knowledge, quality of equipment and the very highstandard of customer care we provide. All equipment is installed and fully supporteddirectly by Pro-Align.
Our nationwide customer base spans all sectors - small independent garages,bodyshops, tyreshops, major franchise dealerships, motorsport specialists and majormotor manufacturers - proving our extensive range of wheel alignment equipmentoffers something to suit every budget and specification.
Our purpose built premises at Towcester enables us to provide the best all roundsupport for our customers. We have a spacious training room, a double alignment bayand wheel service demonstration area, large warehouse and stock facility plus fullyequipped service workshop.
Welcome to our latest Productsand Services brochure. Our extensive range offersyou the opportunity to reap the rewards fromwheel service. If you are interested in any of themodels, we would recommend liaising andmeeting with our Area Team. They will assess yourrequirements, discuss the equipment and yourneeds in more detail. They would be pleased todemonstrate equipment for you too.
Where you see these symbols,more detailed productinformation is available fromwww.pro-align.co.uk, eitheras a downloadable PDF or asa video infomation clip.
The Equipment RangeBeing independent and not manufacturer owned, we have beenable to select and expand our equipment range to meet thedemands in the market place.
Wheel alignment equipment is constantly developing. By usingthe very latest technology, the measurement process has beenmade much quicker and easier for the operator than ever before.Our premium specification Hunter wheel aligners offer the latesthigh powered, multi-media computer driven software (uniqueand award winning) with online features, choice of sensoroptions including the popular imaging sensors along with the allimportant, customer friendly printout – which still remains proofof a job well done!
Development into Complete Wheel Service Systems - Alignmentlifts, balancers and tyre changers, has been a natural progression.But again the Hunter balancer range stand out from the crowd,with the unique vibration control system, and advanced softwareincluding StraightTrak® and the money saving SmartWeightTM.
To extend our service further, we provide a wide range ofalignment accessories, from vehicle loading weight sets, shimsand adjustment tools.
We also offer AutoCAD alignment bay design and equipmentpackages tailored to your business. Don’t forget the unrivalledwheel alignment training for operators and technicians, too.
Our Service and SupportBy specialising, we ensure that service engineers’ knowledge andservicing skills are unsurpassed. To support our customers weoffer a telephone Helpline to assist with any car adjustment andoperation advice. We even offer customers access to an onlineretail alignment site for motorists at, www.AlignMyCar.co.ukThis helps the motorist to find a well-equipped and professionalworkshop, as well as generating extra work/customers for you!
IntroductionProducts and Services
4
Pro
-Align
Pro
du
cts
and
Ser
vice
sProducts and Services
Wheel Aligners
Hunter WA Series AlignerEvery alignment business is different and it is for this very reasonthat Hunter’s WA console can be tailored to your very own needs.There are many cabinet/monitor configurations, to these you canthen select the software and sensor / measuring heads required.
WinAlign® EliteFeatures additional to WinAlign® standard:
AVH – Advanced Vehicle Handling
Virtual ViewTM - 3 dimensional modelling
Mulitimedia training/images/adjustments
Tyre inspection & point and clickinspection
Tools & kits underbody adjustmentinformation
OptionsAdd OE software for BMW,Mercedes or VW Group
Remote control & remote controlwith integral ride height
Shop Results – online alignmentresults
WinAlign Tuner – for working onlowered/modified cars
Target ride height kit giving livebump/rebound steer graphs
Wide screen TFT - unlocks newscreen graphics
Numerous other options available– please discuss
SoftwareThe WA uses Hunter’s award winning WinAlign® software.
WinAlign® Standard is an intuitive alignment sequence,providing a smooth and easy path through the alignmentjob, from start to finish. It has been designed to cover awide range of operator skill levels, with on screen helpbeing just a ‘mouse click’ away. Instant access to onlinenew car specifications with WebSpecsTM
Deluxe ‘R’ Cabinet
5
Sensor featuresl The same measurement accuracy as
imaging technology
l Very light weight and robust
l ProComp® for continuous compensation
Optionsl Extend clamp to 28” wheel capability
Available asl DSP706
Wheelbase difference ‘Rangefinder’
Reverse mount sensors to measure rear Set-Back
Short rear sensors for short lift applications
l DSP708
Wheelbase difference ‘Rangefinder’
Cal-check Toe calibration
Rear set back
Pro
-Alig
nPro
du
cts and
ServicesProducts and Services
Wheel Aligners
Hunter Alignment Sensors
DSP700 Series Conventional Sensors These cable free DSP (Digital Signal Processing) Sensors use thelatest integrated microprocessors to measure alignment angles.Unlike many conventional sensors the DSP700 allow the user tocarry out ‘rolling compensation’ as a short rollback, making theprocess quicker and easier than the traditional jackingcompensation method. The new modern design and styling makethem much lighter, without loss of strength or features.
Hunter 100 AlignerAs a quality ‘mid range’ aligner, the Hunter 100 supports many of the same high standardhardware features as the WA model but with its own custom designed software.
The Hunter 100 gives great flexibility with the provision to run DSP700 seriesconventional sensors or the HawkEye™ imaging technology. This system gives‘upgradeability’ ensuring alignment can grow as business grows.
Featuresl 17” TFT flat screen
l Full keyboard and mouse
l Work storage and recall via USB
memory stick
l Full colour printout, two types,
customer or technician friendly
l Will run three sensor groups
- Conventional sensor cabled
- Conventional sensor radio
- HawkEyeTM imaging
l Powerful software incorporating
many features from the WA model
l Patented adjustment bar graphs.
CAMM® – Control Arm Movement
Monitor. Cuts adjustment time in half
for camber/castor adjust on front
axles with shims, dual cam or slot
adjustments
l WinToe® – adjust the individual Toe
without locking the steering wheel
(avoids torsion build up) gives straight
steering wheel every time
l Extensive European vehicle databank
VIDEO
6
Pro
-Align
Pro
du
cts
and
Ser
vice
s
Wheel AlignersProducts and Services
HawkEyeTM Elite TD Taking wheel alignment to a new level, the Hunter HawkEye Elite TD delivers an unrivalledmeasurement time of around 90 seconds, providing unequalled levels of productivity andprofitability.
The most striking and radical change is the new QuickGrip™ integrated wheel target.Made of tough polycarbonate they fit firmly to the face of the wheel using QuickGrip™adaptors. Featuring spring-loaded arms to grip the tyre making them super quick toattach and without fear of damage.
The HawkEye Elite TD’s unique QuickComp™ system has re-written the compensationrule book, by allowing users to perform rolling compensation, with just one simple rollforward.
It is the unique QuickGrip™ and QuickComp™ combination which gives theseextraordinary time savings and efficiencies. With productivity increasing by up to 30%,even on the other HawkEye systems, it is easy to see why Pro-Align customers are seeingimmediate return on investment.
VIDEO
7
Pro
-Alig
nPro
du
cts and
Services
Wheel AlignersProducts and Services
Alignment as easy as:
1 Fit the targets and roll back and
forth (for compensation)
2 Perform caster swing
3 View live alignment angles
4 Make the adjustments using the
software features to save time
and effort
HawkEyeTM HD available as:l Fixed Column (FC)
l Lift Column (LC)
l Wall Mount (WM)
l Floor Mounted (FM)
HawkEyeTM HD Imaging Sensors HawkEyeTM sensors are Hunter’s third generation of this imaging technology.
The HD version (High Definition) further enhances the alignment process utilising HunterWA aligner console.
Four high resolution digital cameras (in the boom assembly) are able to capture theposition and orientation of the HD targets mounted to the wheel rim. This gives rapid livealignment readings. WinAlign® software leads the operator seamlessly through theadjustment process.
The slightly higher initial cost is more than made up for in the speed and increasedproductivity gained. HawkEyeTM HD greatly reduces the cost of ownership, and will giveone of the highest returns per unit investment within your workshop.
Optional ‘R’cabinet withwide screen
monitor.
Pictured with HunterRX Scissor Lift
Wheel AlignersProducts and Services
VIDEO
8
Pro
-Align
Pro
du
cts
and
Ser
vice
s
HawkEye HexTM Imaging Sensors The HawkEye HexTM imaging system is designed to give all the benefits of imagingalignment, in either a 2 camera or 4 camera option.
HawkEyeTM sensors use multi-dimensional modeling to provide accurate live alignmentmeasurements. These units gives those businesses new to imaging alignment, or thosewhere alignment is a secondary revenue stream, the speed and accuracy ofmeasurement to complete the job in a fast and professional manner.
HawkEye HexTM Featuresl Custom electronics designed for
wheel alignment
l Durable Hex imaging targets
Impact resistant ‘Shatterproof’
aluminium faceplate
l No electronics at wheel
l Powerful 20 years of vehicle
alignment specification
HawkEyeTM Special – 2 CameraThis low cost ‘entry level’ imaging system,opens a unique opportunity of professionalimaging alignment servicing to all!
The two camera, ‘Linux’ based imagingalignment system, is simple anduncomplicated to use, giving live readingsto printout in minutes. The HawkEye™Special offers quality key features andspecialist alignment software, found in thewhole range. These include vehicledatabase and customer data bank, easy-tounderstand ‘before’ and ‘after’ customercolour printouts. The column mount orwall mount console makes it compact anduses the same HEX polycarbonate targetsas the Hunter 100 version.
HawkEyeTM – 4 Camera A step up from the 2 Camera system, the4 camera system caters for that next level.Using the Hunter 100 software, it providesa wider range of software and operatingoptions, all adding to the efficiencies andthroughput of the service offered.Available in column mount or cabinetversions.
9
Pro
-Alig
nPro
du
cts and
ServicesProducts and Services
Wheel Aligners
Hunter Homologated/Approved Alignment SystemsPro-Align supplies a very wide range of homologated aligners. These are modelsspecific to meet (and exceed) standards set by car manufacturers from around theworld. There is no manufacturer who does not endorse, promote or actively useHunter. Often seen at three levels in a car company; i) factory level, used for auditwork on production vehicles, ii) factory level used for research and developmentby engineering, iii) used within the dealer network for aftermarket postservice/repair alignment work and within the bodyshop network.
Stop Press!For independent workshops orbodyshops requiring multi OEapprovals, we can offer a Hunteraligner with a tailored suite of OEsoftware and hardware to meet multiOE standards.
VW Group - VAS6292
Mercedes - HTA-MBR
BMW - KDS II Plus
All motor manufacturersendorse Hunter’s HawkEyeTM
imaging aligners.
Conventional SensorsThese Motor Manufacturer approved DSP500 (Digital Signal Processing)sensors use microprocessors and CCD (Charge Couple Device) to provideprecisely measured alignment angles, to meet OEM requirements.
Plus: Aston Martin, Porsche, Ford,
Toyota GB, Jaguar, Landrover, Fiat,
Citroen, Renault and Peugeot...
to mention a few.
Products and Services
Wheel Alignment Softwareand Accessories
CodeLink™CodeLink recalibrates the vehicle’s steeringangle sensor (SAS), as required by OEM, tomatch the final thrust angle of the vehicle.This ensures the vehicle’s electronicstability control (ESC) functions properly.
Failure to perform the manufacturerrecommended SAS reset procedure maycause several conditions that could resultin comebacks.
ShopResults.netKeep customers fully informed with theprogress of the alignment, by emailingthe report of the needed service /adjustment work, or of the completedwork directly to them at home, at theoffice or to a smart phone. Direct links tomore comprehensive video explanationsof the service are included.
Alternatively send the report directly tothe reception desk to show to waitingcustomers, or for business partners, thealignment information can be forwardedfor warranty validation, insurance claimsor other business purposes.
Hunter Standard Clamp Set:
Fits to 20” or 24” wheel rims.
Hunter Standard Clamp Set,with optional tyre clamp kit:
This extends the usability forthose very difficult alloywheels. Where no metal tometal contact is required.
Hunter Professional Clamp Set:
Adds further possibilities withthe addition of BMW or MBpin sets.
WinAlign Tuner™ This custom alignment software isdesigned to meet the specific needs forworkshops servicing the rapidly growingand highly profitable custom andmodified car market. The additionalprocedures and tools have beendesigned to align lowered and alteredride height vehicles for desiredperformance or appearance. It includes:
l Performance vs Tyre Life
Selection
l Bump Steer Measurement
l Electronic Vehicle Ride Height
Measurement
l Tyre Temperature Test
10
Pro
-Align
Pro
du
cts
and
Ser
vice
s
Hunter Wheel Clamp Options
VIDEO
11
Pro
-Alig
nPro
du
cts and
ServicesProducts and Services
Balancers
Hunter GSP9700Road Force BalancerSolve some of the most difficult customer complaints, concerning vibration and ridequality, with the award winning Road Force Balancer and benefit from the secondaryrevenue generating opportunity it provides.
The Hunter GSP9700 measures tyre forces that balancers and wheel aligners alonecannot fix. These are known as Radial Force Variation (RFV) and Lateral ForceMeasurement (LFM). In the past they have been extremely hard to accurately identifyand virtually impossible to measure – until now!
The Hunter GSP9700 achieves this in seconds by taking the wheel and tyre for asimulated road test by applying the load roller – up to 700Kg of force. For a 10-second addition to the balance process, it establishes tyre and wheel uniformity orRFV. Where RFV is high, ForceMatching® advises where to match the tyre stiff spotwith the wheel rim low spot - thus giving a smoother rolling ride. Where LFM ishighlighted, follow the steps to reposition the wheels for a straight drive!
This unique system has gained approvals from, and has been purchased by all themain OE’s, as it has been designed to achieve that ‘new car feel’ for the aftermarket.
www.gsp9700.com
Benefits of the GSP9700repair capabilitiesl Solves vibration problems that
balancers alone can’t fix
l Establish your business as the
vibration experts
l Reduce comebacks
l Build customer loyalty
l Increases service revenue
VIDEO
Featuresl ForceMatching® (page 11)
l StraightTrak® (page 11)
l SmartWeightTM (page 12)
l Automatic double dataset arms for
data entry
l Wheel centring check, confirms
adapter fit
l Quick thread auto clamping
l Foot pedal ‘tap and go’ command
l Inflation station
l Servo stop - positions wheel ready
for weight positioning
Optionsl Pneumatic Clamping
l Adapters cones and flange plates
(see page 14)
l Wheel lift
l Colour Printer
GSP9700
BMW GSP97BM
Mercedes Benz GSP97MB
VW Group VAS6230
Hunter HomolgatedApproved Balancer
Balancer approved by motormanufacturers, for use in a dealer network.
Radial ForceMeasurement andForceMatching®
The lack of tyre uniformity is often ahidden source of vibration. As the tyrerolls, it flexes as if it were made ofsprings. Vibration results when the tyrestiffness is not uniform.
The Hunter GSP9700 diagnoses ‘RadialForce Variation’ or differences in tyreuniformity through the use of a ‘RoadRoller’. This provides a road test of thewheel and tyre assembly on theGSP9700, which identifies the stiff/highspot on the tyre. Then using theForceMatching® feature, it matches thestiff/high spot on the tyre with the lowspot on the wheel rim, (followingmeasurement of rim runout), whicheffectively reduces or eliminates thevibration, providing the smoothest ridepossible.
The GSP9700 provides step-by-stepinstructions with easy to follow colourgraphics.
StraightTrak® Lateral Force MeasurementA pull/drift problem is one of the most difficult handling issues to fix. Tyre related pull iscaused by lateral forces in the tyre – the amount of left or right pull force as the tyre rollsalong the road. Tyre conicity is often the cause.
The Hunter GSP9700 diagnoses Lateral Force Measurement using the ‘Road Roller’ andStraightTrak® software. After measurement, when the amount and direction of pull has beenidentified, each wheel is ‘tagged’ and the best tyre arrangement plan for the car is displayed.The pull caused by lateral forces can be systematically, minimised, offset or eliminated.
Balancer SoftwareProducts and Services
12
Pro
-Align
Pro
du
cts
and
Ser
vice
s
Products and Services
Balancer Software
Hunter SmartWeight™ Hunter technology establishes a new era of wheel balancingHunter’s patented SmartWeight™ is a revolutionary wheel balancing method thatminimises correction weight usage and maximises productivity, saving money on bothmaterial and labour costs, without reducing ride quality.
This new method computes correction weights by measuring and evaluating the“absolute” or pure static (shake) and couple (shimmy) forces that cause vibration.Unlike traditional balancing, which judges balance condition based on correctionweight values,
SmartWeight™ balancing uses the actual staticand couple forces, which directly addressesthe source of vibration problems, resulting inthe best possible balance. SmartWeight™applies an independent tolerance for bothstatic and couple forces.
The unique balancing philosophy ofSmartWeight™ presents money-savingadvantages never available before in a wheelbalancer. SmartWeight™ eliminates excessivecorrection weight usage and can actuallyreduce the average shop’s wheel weight andlabour costs by 35% or more. More efficientweight usage means faster service time withmore single-spin balances, no checkspins orweight chasing.
WINNERINNOVATION
TAFF AWARD
13
Pro
-Alig
nPro
du
cts and
Services
SmartWeightTM Balancing
Traditional Balancing
VIDEO
BalancersProducts and Services
14
Pro
-Align
Pro
du
cts
and
Ser
vice
s
Hunter GSP9200A premium feature balancer for theprofessional workshop. Being builtaround a very strong chassis andbalance shaft assembly, this unit isrobust. The direct drive motor controlsthe spin and positions the wheel readyfor weight placement. The software isdesigned to speed up the balanceprocess and includes the award winningSmartWeightTM. The balancer has thefacility to add the optional printer.
Featuresl 17” flat screen monitor
l Hunter computerised software
l SmartWeightTM
l ServoDrive DC motor – Servo
stop automatically positions wheel
to each desired weight location.
Enables motorised tightening and
loosening of spindle wing nut
l Double dataset arms - inside and
outside data set arms, speeds
wheel dimension entries
l Long balance shaft - for wide
wheels with high rim inset
l Laser guided weight positioning
Optionsl HammerHead TDC
l Very wide range of cone and
flange plates
l Closed centre wheel adaptor
l Motorcycle adaptor
l Colour printer
Pictured withoptional HunterHammerhead TDCLaser attachment.l Illuminates the
workstation
l Can be retro fitted
GSP9200
BMW GSP92BMW
Mercedes Benz GSP9200MB
VW Group VAS6533
Hunter Homolgated Approved BalancerBalancer approved bymotor manufacturers,for use in a dealer network.
15
Pro
-Alig
nPro
du
cts and
Services
Tyre ChangersProducts and Services
VIDEOHunter Auto34The effortless operation and motion ofthis most advanced leverless tyrechanger, makes changing the world’stoughest performance tyres and wheelssimple! Its unique features, automatedfunctions and powerful high torquemotor can service wheels up to 34” indiameter safely and easily.
Control at your finger tips – intuitivecontrols deliver quick tyre change times,easy to learn and reduces chance forerror.
Ultra thin Patent tool head – Swiftdown/up motion released bead in onefluid motion.
Hydraulic bead loosening roller system –Precise control and proximity sensorsallows bead to be broken close to rimprotecting tyre side wall and anypressure sensors. The robust rollers arecapable of holding the tyre stationarywhile the rim is rotated to effect match-mounting.
Tool head, bead roller and clampingtable operation use simple controls thatare easy to learn and promote fast,efficient service. Only three switches andone foot pedal control virtually all tyrechanging operations, ensuring the samesimple operation on all wheelsregardless of the size, design or fitment.
Selected for the Nissan GTR equipmentprogram.
Pictured withoptional wheel lift.
Featuresl Automatic ‘space saving’ swing arm
l Specialist designed thin leverless tool head prevents damage to both rim and beads.
l Patented Bead Press System speeds and eases clamping, lubricating, demounting and mounting.
l Superior Clamping for 12” to 30” rims
Featuresl Push button controls
l Patented tool head – Eases tyre bead over rim without traditional tyre lever
l Mount Demount rollers
l Self centring & quick clamp table. Range 10”– 34”
l High torque motor – over 850ft/lb torque
l Precise control bead loosening roller system
l Blast inflation
A real value for money ‘leverless’ tyrechanger, combines traditional designelements for maximum service strengthand rigidity with advanced capabilities,
to service everything from steel wheelsto challenging low-profile tyres on large-diameter rims.
Hunter TCX575Leverless Tyre Changer
16
Pro
-Align
Pro
du
cts
and
Ser
vice
s
Tyre ChangersProducts and Services
Hunter TCX525Automatic Tilt Column Tyre ChangerA premium quality changer designed specifically forhigh volume work. High quality construction.Pneumatically operated pedal controlled tilt back post.Mounting and demounting of car, van and light trucktyres. Great performance and great reliability.
Featuresl Powerful bi-directional
turntable
l Inside clamping 13”-24”
l Outside clamping 11”-22”
Optionsl ‘GP’ adds Bead blast
inflation from the jaws
l ‘BPS’ Bead Press System
l PAX add on for BPS
l Wheel lift
l Jaw extensions
Hunter TCX550Automatic Swing Arm Tyre ChangerA premium quality changer designed specifically to suitthose difficult low profile rims. High Qualityconstruction (example - nickel plated for long life andmaximum corrosion resistance).
l Table top clamping for 12” to 28” rims
l Interchangeable quick release tool head
l Two speed motor
l Height adjustable table
l Good storage for adapters and accessories
l Auto tool head repositioning
Bead Press SystemSpeeds and eases clamping, lubricating,demounting and mounting on thetoughest wheel and tyre combinations.Tapered rollers and pneumatic control aidsholding tyres in the well. Lower roller discassists in lifting and holding the tyre up onthe wheel for demounting the lower bead.
Optionsl ‘GP’ adds Bead blast
inflation from the jaws
l ‘BPS’ Bead Press System
l PAX add on for BPS
l Wheel lift
Shown withBead Press
System.
LiftLign 6402 and 6502 Manufactured in one of Europe’s largestfacilities, with high investment in roboticautomation and quality control. With righthand control box as standard makes operationquick and easy. Front turnplate recess(turnplates come with wheel aligner) and largeintegral rear slip plates with roller ball bearingswith air locking from the control box.
17
Pro
-Alig
nPro
du
cts and
Services
Alignment LiftsProducts and Services
Featuresl Moveable infill kit to accommodate those
very short or very long wheelbase vehicles for wheel alignment
Optionsl Jacking beams 2000-3000kg manual or pneumatic
l Secondary small inbuilt scissor lift (lifting table) 3500kg
l Play detector (8way)
l Addition of planetary levelling for DC/VW group approval
l Single phase in lieu of 3 phase
l Lighting Kit
Featuresl Automatic locking rear slip plates
l 2 x moveable work steps
l Air Line kit – Integrated (for air tools or air jacks)
l Inflation stations (4 off)
l Control box position in 4 locations
* Requires WinAlign 11 or higher to be driven from the aligner console.
Capacity 4000kg
Platform Length 5000mm
Overall length 6248mm (including run up ramps)
Overall width 2248mm (excluding control box)
Wheelbase Min/Max 2235mm - 4013mm
Capacity 4200kg - 5000kg
Platform Length 4600mm - 5100mm
Hunter RX45This Hunter pedigree premium wheelalignment lift brings wheel alignmentservicing to a new dimension. Patented FullyIntegrated Alignment with PowerBay™ andInflation Stations™ can offer workshopsgreater flexibility and time savingcapabilities, enhancing productivity.*
Scissor Wheel Alignment LiftsHigh accuracy for specialist wheel alignment work.
Scissor wheel alignment lifts are often selected where the bay sizeis limited (in width), or where the modern look is required. Scissorramps are quite deep in their closed position and hence the run upramps can extend some way behind. Recessing ‘in ground’ is ideal.
18
Pro
-Align
Pro
du
cts
and
Ser
vice
s
Alignment LiftsProducts and Services
Four Post WheelAlignment Lifts A wide selection of four post wheelalignment lifts. High levelling accuracy asstandard.
Often selected (over a scissor lift) wherethe bay width is generous or where lowcost is a major factor. The ramps haveintegral level locking for accuratealignment work. Shallow height in closedposition reduces run-up ramp length to aminimum.
Front turnplate recesses (turnplates comewith the wheel aligner) with moveableinfill kit to accommodate varied vehiclewheelbases.
Large integral rear slip plates with largeroller ball bearings with rotational andlateral travel.
LiftLign 402 and 406A well established range of 4 postalignment lifts, good capacity range withlarger capacity available by factory order.Front turnplate recesses and largeintegrated rear slip plates, as with theLiftLign 402 and 406. Full mechanicallocking for accurate levelling at variousalignment heights. The LiftLign 402 and406 models are ideal for use with HunterHawkEye™ imaging alignment systems.
LiftLign 40LT51Specifically designed to suit the HunterHawkEye™ imaging alignment systemsLiftLign 40LT51 has an integral liftingtable (with mechanical safety locks) plusthe rear slip plates with automatic lockingcapability, as standard. Air treatmentfilter-regulator/ lubricator to protectpneumatic rams.
Featuresl Lifting table fits flush to inner edge of
the platform
Featuresl Moveable infill kit to accommodate
those very short or very long wheelbasevehicles for wheel alignment
Options l Jacking beams 2000-3000kg manual
or pneumatic
l Secondary small in-built scissor lift
(lifting table) 3500kg
l Play detector (8way)
l Homologated versions MB,
VW group, BMW
l Factory fitted lighting kit
l Single phase in lieu of 3-phase power
Capacity 4000kg - 5000kg
Platform Length 4400mm - 5100mm
Width between posts 2600mm - 3000mm
Overall width3165mm - 3565mm(excluding control box)
Wheelbase Min/Max 2235mm - 4330mm
Capacity Ranges from 4000kg
Platform Length 5100mm
Width between posts 2900mm
Overall width3165 mm - 3565mm(excluding control box)
Lifting table Min/Max 1490mm - 1966mm
TrainingTraining is paramount in gaining the best from all diagnostic equipment. At Pro-Align wepride ourselves in offering quality training either on-site (usually at installation of newequipment – as an entry level of competence) or at our training facility at Towcester.
Our specialist training facility has been set up to ensure the highest standard of trainingis offered; away from noise, interruptions and work pressures associated with on sitetraining. All training sessions commence in the presentation room, where the theory issupported by audio visual presentations, progressing to our fully equipped demonstrationbays in the workshop. This is where trainees convert classroom knowledge into practise,with hands on equipment experience.
All our trainers have extensive experience as field engineers, so have a full understandingof workshop environments and can pass on their valuable knowledge.
Our courses are chargeable (unless using training vouchers supplied with the equipment)covering Hunter models with either conventional or imaging sensor systems;
l Alignment theory and 4 wheel toe adjustment with straight steering wheel
l Alignment theory summary of standard operation and additional alignment
adjustments/advanced understanding and operation.
Further courses:l Alignment Diploma – Advanced alignment techniques
l Wheel balancing (including SmartWeightTM)
l Marketing alignment (add-on module)
l Personalised courses for National Account customers
l Train the Trainer, one-to-one
Aftersales and Helpline SupportHeaded by the Aftersales Manager, Colin Avis, the Aftersales team are professional, andenthusiastic for the important job they do – ensuring the equipment you have investedin gives maximum service performance, with the least amount of downtime.
Our experienced field based regional engineers are fully factory trained on all Pro-Alignand Hunter equipment and offer complete national coverage. All the engineer’s vans arehighly equipped with optimum capacity of spares and tooling to service your needs. Youcall, we respond!
The telephone helpline is your first port of call when backup and support is needed. TheTowcester based team is proficient in the products we sell and are able to liaise andadvise, when equipment appears not to be performing as required.
Alternatively, with complicated alignment sequences on many cars what is sometimesneeded is new alignment data, adjustment instruction or just a guiding hand. You call,we’ll help!
We aim not just to meet your expectations, but to exceed them!
19
Pro
-Alig
nPro
du
cts and
Services
Training and Aftersales SupportProducts and Services
01
12
The Old Orchard Towcester Road Greens Norton Towcester NN12 8AN Telephone 01327 323007 Fax: 01327 354529 Web: www.pro-align.co.uk
Imaging Aligners
Conventional Aligners
Alignment Lifts
Road Force Balancer - SmartWeightTM
Wheel Balancers - SmartWeightTM
Tyre Changers
Alignment Tools and Accessories
