Advances in Intelligent Systems and Computing

Volume 1202

Series Editor

Janusz Kacprzyk, Systems Research Institute, Polish Academy of Sciences,Warsaw, Poland

Advisory Editors

Nikhil R. Pal, Indian Statistical Institute, Kolkata, India

Rafael Bello Perez, Faculty of Mathematics, Physics and Computing,Universidad Central de Las Villas, Santa Clara, Cuba

Emilio S. Corchado, University of Salamanca, Salamanca, Spain

Hani Hagras, School of Computer Science and Electronic Engineering,University of Essex, Colchester, UK

László T. Kóczy, Department of Automation, Széchenyi István University,Gyor, Hungary

Vladik Kreinovich, Department of Computer Science, University of Texasat El Paso, El Paso, TX, USA

Chin-Teng Lin, Department of Electrical Engineering, National ChiaoTung University, Hsinchu, Taiwan

Jie Lu, Faculty of Engineering and Information Technology,University of Technology Sydney, Sydney, NSW, Australia

Patricia Melin, Graduate Program of Computer Science, Tijuana Instituteof Technology, Tijuana, Mexico

Nadia Nedjah, Department of Electronics Engineering, University of Rio de Janeiro,Rio de Janeiro, Brazil

Ngoc Thanh Nguyen , Faculty of Computer Science and Management,Wrocław University of Technology, Wrocław, Poland

Jun Wang, Department of Mechanical and Automation Engineering,The Chinese University of Hong Kong, Shatin, Hong Kong

The series “Advances in Intelligent Systems and Computing” contains publicationson theory, applications, and design methods of Intelligent Systems and IntelligentComputing. Virtually all disciplines such as engineering, natural sciences, computerand information science, ICT, economics, business, e-commerce, environment,healthcare, life science are covered. The list of topics spans all the areas of modernintelligent systems and computing such as: computational intelligence, soft comput-ing including neural networks, fuzzy systems, evolutionary computing and the fusionof these paradigms, social intelligence, ambient intelligence, computational neuro-science, artificial life, virtual worlds and society, cognitive science and systems,Perception and Vision, DNA and immune based systems, self-organizing andadaptive systems, e-Learning and teaching, human-centered and human-centriccomputing, recommender systems, intelligent control, robotics and mechatronicsincluding human-machine teaming, knowledge-based paradigms, learning para-digms, machine ethics, intelligent data analysis, knowledge management, intelligentagents, intelligent decision making and support, intelligent network security, trustmanagement, interactive entertainment, Web intelligence and multimedia.

The publications within “Advances in Intelligent Systems and Computing” areprimarily proceedings of important conferences, symposia and congresses. Theycover significant recent developments in the field, both of a foundational andapplicable character. An important characteristic feature of the series is the shortpublication time and world-wide distribution. This permits a rapid and broaddissemination of research results.

** Indexing: The books of this series are submitted to ISI Proceedings,EI-Compendex, DBLP, SCOPUS, Google Scholar and Springerlink **

More information about this series at http://www.springer.com/series/11156

Giuseppe Di Bucchianico •

Cliff Sungsoo Shin • Scott Shim •

Shuichi Fukuda • Gianni Montagna •

Cristina CarvalhoEditors

Advances in IndustrialDesignProceedings of the AHFE 2020 VirtualConferences on Design for Inclusion, Affectiveand Pleasurable Design, InterdisciplinaryPractice in Industrial Design, KanseiEngineering, and Human Factors for Appareland Textile Engineering, July 16–20, 2020, USA

123

EditorsGiuseppe Di BucchianicoDipartimento di ArchitetturaUniversità degli Studi “G.d’Annunzio”Pescara, Pescara, Italy

Scott ShimUniversity of Notre DameIndiana, IN, USA

Gianni MontagnaFaculty of ArchitectureUniversity of LisbonLisbon, Portugal

Cliff Sungsoo ShinDepartment of Industrial DesignUniversity of Illinois at Urbana ChampaignChampaign, IL, USA

Shuichi FukudaSystem Design and ManagementKeio UniversityTokyo, Japan

Cristina CarvalhoFaculty of ArchitectureUniversity of LisbonLisbon, Portugal

ISSN 2194-5357 ISSN 2194-5365 (electronic)Advances in Intelligent Systems and ComputingISBN 978-3-030-51193-7 ISBN 978-3-030-51194-4 (eBook)https://doi.org/10.1007/978-3-030-51194-4

© The Editor(s) (if applicable) and The Author(s), under exclusive licenseto Springer Nature Switzerland AG 2020This work is subject to copyright. All rights are solely and exclusively licensed by the Publisher, whetherthe whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse ofillustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, andtransmission or information storage and retrieval, electronic adaptation, computer software, or by similaror dissimilar methodology now known or hereafter developed.The use of general descriptive names, registered names, trademarks, service marks, etc. in thispublication does not imply, even in the absence of a specific statement, that such names are exempt fromthe relevant protective laws and regulations and therefore free for general use.The publisher, the authors and the editors are safe to assume that the advice and information in thisbook are believed to be true and accurate at the date of publication. Neither the publisher nor theauthors or the editors give a warranty, express or implied, with respect to the material contained herein orfor any errors or omissions that may have been made. The publisher remains neutral with regard tojurisdictional claims in published maps and institutional affiliations.

This Springer imprint is published by the registered company Springer Nature Switzerland AGThe registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland

Advances in Human Factorsand Ergonomics 2020

AHFE 2020 Series Editors

Tareq Z. Ahram, Florida, USAWaldemar Karwowski, Florida, USA

11th International Conference on Applied Human Factors and Ergonomics and theAffiliated Conferences

Proceedings of the AHFE 2020 Virtual Conferences on Design for Inclusion,Affective and Pleasurable Design, Interdisciplinary Practice in Industrial Design,Kansei Engineering, and Human Factors for Apparel and Textile Engineering,July 16–20, 2020, USA

Advances in Neuroergonomics and CognitiveEngineering

Hasan Ayaz and Umer Asgher

Advances in Industrial Design Giuseppe Di Bucchianico, Cliff SungsooShin, Scott Shim, Shuichi Fukuda,Gianni Montagna and Cristina Carvalho

Advances in Ergonomics in Design Francisco Rebelo and Marcelo Soares

Advances in Safety Management and HumanPerformance

Pedro M. Arezes and Ronald L. Boring

Advances in Human Factors and Ergonomics inHealthcare and Medical Devices

Jay Kalra and Nancy J. Lightner

Advances in Simulation and Digital HumanModeling

Daniel N Cassenti, Sofia Scataglini,Sudhakar L. Rajulu and Julia L. Wright

Advances in Human Factors and SystemsInteraction

Isabel L. Nunes

Advances in the Human Side of ServiceEngineering

Jim Spohrer and Christine Leitner

Advances in Human Factors, BusinessManagement and Leadership

Jussi Ilari Kantola, Salman Nazir andVesa Salminen

Advances in Human Factors in Robots, Dronesand Unmanned Systems

Matteo Zallio

Advances in Human Factors in Cybersecurity Isabella Corradini, Enrico Nardelli andTareq Ahram

(continued)

v

(continued)

Advances in Human Factors in Training,Education, and Learning Sciences

Salman Nazir, Tareq Ahram andWaldemar Karwowski

Advances in Human Aspects of Transportation Neville Stanton

Advances in Artificial Intelligence, Software andSystems Engineering

Tareq Ahram

Advances in Human Factors in Architecture,Sustainable Urban Planning and Infrastructure

Jerzy Charytonowicz

Advances in Physical, Social & OccupationalErgonomics

Waldemar Karwowski, Ravindra S.Goonetilleke, Shuping Xiong,Richard H.M. Goossens and AtsuoMurata

Advances in Manufacturing, ProductionManagement and Process Control

Beata Mrugalska, Stefan Trzcielinski,Waldemar Karwowski, Massimo DiNicolantonio and Emilio Rossi

Advances in Usability, User Experience, Wearableand Assistive Technology

Tareq Ahram and Christianne Falcão

Advances in Creativity, Innovation,Entrepreneurship and Communication of Design

Evangelos Markopoulos, Ravindra S.Goonetilleke, Amic G. Ho and YanLuximon

vi Advances in Human Factors and Ergonomics 2020

Preface

Industrial design has been one of the fastest growing and demanding areas whichmade significant contributions to our lives and societies. Traditionally, industrialdesigners focus on the aesthetics of products’ form and style as well as ergonomics.This tradition has expanded its boundary to other subject matters such as servicedesign, human–computer interaction and user experience design, sustainable designand virtual & augment reality. This is a strong indication that interdisciplinarycollaboration across disciplines became an essential and critical practice in design.

This book covers five unique but overlapping design topics, namely: design forinclusion, interdisciplinary practice in industrial design, affective and pleasurabledesign, Kansei engineering and human factors for apparel and textile engineering.

This book has two underlying messages, the emerging importance of the socialissue of inclusion and human diversity in contemporary society, and the increasingawareness that there is no such thing as a ‘standard human being.’ The first questionhas to do with inequality and social disparity as a necessary milestone towardeconomic revival, among other things, while a vital role in the strategies adopted bythe European Union’s Horizon 2020 Framework Program is played by the ones thatfocus on strengthening equality, participation and accessibility for all to goods,services and what Dahrendorf called ‘life chances.’ What this means is that theissue of social inclusion of diversity and for equality is firmly on political agendasall over the world, not least because of increasing awareness that new visions, newstrategies, new tools and new approaches are needed, if we are to tackle thechallenges arising from recent phenomena of economic and cultural globalization,demographic change, economic migration from poorer countries and an agingpopulation in wealthier countries, phenomena that are destined to upset the entireplanet’s micro- and macroeconomic and social structures in years to come. Thesecond issue tackled in this book is more technical in nature, since the paradigmchange from ‘designing for standards’ and ‘inclusive products and service design’to the enlightened awareness that there are no such concepts to fit the standardhuman being, this has immediate, direct repercussions on the specialized dimensionof designing. The realization is at last taking hold not only that those individuals arephysically, psychologically and culturally ‘diverse,’ but they also have widely

vii

diversified skills, abilities, aspirations and desires that make each one of us uniqueand not at all replicable. Since the diversity of individuals is the rule, not theexception, it makes sense to consider it as a resource, not as a limiting factor or arestriction on design, while equality between individuals, communities and peoplesshould be treated as fundamental strategic inputs to the sustainable development ofcontemporary society, where everybody should have the same opportunities toexperience places, products and services. Numerous design approaches have beenadopted to facilitate social and cultural inclusion in recent decades: design fordisability, universal design, inclusive design and design for all. All of thesephilosophies, approaches and methodologies aim to build value on all aspects ofhuman diversity, from psychophysical to cultural issues, and to offer equalopportunity to everyone in order to experience places, products, services and sys-tems. With this in mind, this book sets out to forge a climate conducive to dis-cussion and comparison between these approaches, without any prejudice in favoror against any one of them, but attempting to identify the elements they hold incommon and to build each one’s heritage of originality, because we are convincedthat the true resource of design for inclusion may well be found in this verydiversity of opinions.

The Interdisciplinary Practice in Industrial Design (IPID) aims at exploring andbroadening the practice in industrial Interdisciplinary design process. The confer-ence includes discussions on 1) a theoretical investigation as well as professionalpractice to foster interdisciplinary collaboration across disciplines, 2) design pro-jects through interdisciplinary collaboration, 3) design process with external publicand private sector partners with a solid record of interdisciplinary developmentexperience and 4) design methods and techniques to investigate productive andeffective interdisciplinary collaboration in design.

This book also focuses on an apparel and textile engineering along with positiveemotional approach in product, service and system design and emphasizes aes-thetics and enjoyment in user experience. This book provides dissemination andexchange of scientific information on the theoretical and practical areas of affectiveand pleasurable design for research experts and industry practitioners from multi-disciplinary backgrounds, including industrial designers, emotion designers,ethnographers, human–computer interaction researchers, human factors engineers,interaction designers, mobile product designers and vehicle system designers.

A total of seventeen sections are presented in this book:

Section 1 Products and Services for an Inclusive SocietySection 2 Design for Inclusion: Future Strategies and ChallengesSection 3 Design for Disability and Social InclusionSection 4 Designing for Inclusion in the Information SocietySection 5 Design for Inclusion in the Living EnvironmentSection 6 Interdisciplinary Design EducationSection 7 Interdisciplinary Approach to Industrial DesignSection 8 Interdisciplinary Approach to Digital DesignSection 9 Interdisciplinary Approach to Design Innovation

viii Preface

Section 10 Interdisciplinary Approach to Design ManufacturingSection 11 Human Factors Research Methods for Hand and Tool DesignSection 12 Kansei EngineeringSection 13 Human Factors for Textile and SocietySection 14 Apparel Design and Textile EngineeringSection 15 Coordinating for Emotional SatisfactionSection 16 Affective Value and Kawaii EngineeringSection 17 Sensory Engineering and Emotion

Sections 1–5 cover topics in design for inclusion, Sections 6–11 cover topics ininterdisciplinary practice in industrial design, Section 12 covers topics in Kanseiengineering, Sections 13 and 14 cover topics in textile design and engineering, andSections 15–17 cover topics in affective and pleasurable design.

Each section contains research papers that have been reviewed by membersof the International Editorial Board. Our sincere thanks and appreciation go to theBoard Members as listed below:

Design for Inclusion

C. Aceves Gonzales, MexicoA. Accolla, ChinaD. Al Thani, QatarD. Busciantella Ricci, ItalyR. Gheerawo, UKN. Ivanova, UKK. Kawahara, JapanP. Kercher, ItalyT. Liu, USAN. Martins, PortugalG. Mincolelli, ItalyF. Nickpour, UKJ. Rieger, AustraliaM. Zallio, Italy

Interdisciplinary Practice in Industrial Design

Y. Choi, USAK. Kim, KoreaM. Kim, USAY. Kim, USAJ. Park, USAS. Shim, USA

Human Factors for Apparel and Textile Engineering

L. Almeida, PortugalA. Broega, PortugalC. Figueiredo, Portugal

Preface ix

S. Heffernan, New ZealandA. Marr, UKC. Morais, PortugalF. Moreira da Silva, PortugalD. Ramos, PortugalM. Sbordone, Italy

Affective and Pleasurable Design

A. Aoussat, FranceS. Bahn, KoreaL. Chen, TaiwanK. Cho, KoreaS. Choi, USAD. Coelho, PortugalO. Demirbilek, AustraliaM. Feil, USAA. Freivalds, USAQ. Gao, ChinaR. Goonetilleke, Hong KongB. Henson, UKA. Ho, Hong KongW. Hwang, KoreaY. Ji, KoreaE. Jung, KoreaJ. Kim, KoreaK. Kim, KoreaK. Kotani, JapanS. Minel, FranceK. Morimoto, JapanM. Ohkura, JapanT. Park, KoreaP. Rau, ChinaS. Schutte, SwedenD. Shin, USAA. Warell, SwedenM. Yun, Korea

Kansei Engineering

A. Lokman, MalaysiaY. Matsubara, JapanT. Tsuchiya, Japan

Special thanks to Professors Mitsuo Nagamachi and Shigekazu Ishihara for theirvaluable contribution to the research track focusing on Kansei engineering.

x Preface

We hope that this book, which is the international state of the art in the industrialdesign, will be a valuable source of theoretical and applied knowledge enablinghuman-centered design of variety of products, services and systems for globalmarkets.

Giuseppe Di BucchianicoCliff Sungsoo Shin

Scott ShimShuichi Fukuda

Gianni Montagna

July 2020

Cristina Carvalho

Preface xi

Contents

Products and Services for an Inclusive Society

Human Centered Design Methodologies Applied to Complex ResearchProjects: First Results of the PLEINAIR Project . . . . . . . . . . . . . . . . . . 3Giuseppe Mincolelli, Gian Andrea Giacobone, Silvia Imbesi,and Michele Marchi

Envisioning the Future and Going Back: A Human-Centered Strategyto Develop the Styling of a Sports Car . . . . . . . . . . . . . . . . . . . . . . . . . . 10Gian Andrea Giacobone and Giuseppe Mincolelli

The DfA Quality Label: Design for All Practical EvaluationExperiences for Inclusive Design Solutions . . . . . . . . . . . . . . . . . . . . . . . 18Giuseppe Di Bucchianico

Social Innovation in Fashion Design: Can Design ProvideOpportunities of Inclusion to Refugees in Greece? . . . . . . . . . . . . . . . . . 24Giovanni Maria Conti and Maria Angeliki Panagiotidou

Fashion and Inclusive Design: Assistive TechnologiesApplied to Clothing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Grazyella C. O. Aguiar, Leonardo M. Rincon, Miguel A. F. Carvalho,Christian Mailer, Fabieli D. Breier, and Fernando B. Ferreira

Analysis of the Sensorial Characteristics of Materialsfor Inclusive Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Stefania Camplone and Emidio Antonio Villani

User Friendly Eco Bag for Everyday Life . . . . . . . . . . . . . . . . . . . . . . . 45Stefania Camplone, Giuseppe Di Bucchianico, and Grazia Ventrella

xiii

Design for Inclusion: Future Strategies and Challenges

Exploring Boundaries and Synergies Between Inclusive Designand Service Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Daniele Busciantella-Ricci, Libertad Rizo-Corona,and Carlos Aceves-Gonzalez

Evaluating Possibilities in Chinese Market and Media for StrategicDesign for Sustainable Development and Inclusion . . . . . . . . . . . . . . . . 62Avril Accolla, Ziquan Wang, and Huichan Liu

Employing the Inclusive Design Process to Design for All . . . . . . . . . . . 69Jenna Mikus, Victoria Høisæther, Carmen Martens, Ubaldo Spina,and Janice Rieger

Using AI to Enable Design for Diversity: A Perspective . . . . . . . . . . . . . 77Fang Li, Hua Dong, and Long Liu

Design for Inclusion and Diversity: Developing Social Competenciesin Engineering Education . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Claudia Lizette Garay-Rondero, David Ernesto Salinas-Navarro,and Ericka Zulema Rodríguez Calvo

Design for Disability and Social Inclusion

Design for Inclusion in the Nautical Field. DfA Guidelinefor Small Motorboats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Jessica Lagatta

Diary Methods Used in Research on Visually Impaired People . . . . . . . 103Dawoon Jeong and Sung H. Han

Designing Accessible Maps on Mobile Devices for Blindand Visually Impaired Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Tania Calle-Jimenez, Sergio Luján-Mora, Hugo Arias-Flores,Carlos Ramos-Galarza, and Isabel L. Nunes

Balance of Considerations Between Technological and Social Factors:A Case Study on SmartrackTM for the Visually Impaired . . . . . . . . . . . 117Yi Lin Wong, Kin Wai Michael Siu, and Chi Hang Lo

Design and Development of an All-Terrain Wheelchairfor Rural Areas in Mexico: The First Stage of the Project . . . . . . . . . . . 124Alberto Rossa-Sierra, Ana Paula Diaz-Pinal, Fabiola Cortes-Chavez,Felix Maldonado de la Fuente, and Gilberto Carrillo-Alvarado

xiv Contents

Designing for Inclusion in the Information Society

Building Communities Through Digital Data Sharing . . . . . . . . . . . . . . 133Soroosh Nazem, Valeria Bruni, Elena Fabris, Alan Marcus, Barbara Melis,and Graziella Roccella

How to Democratize Internet of Things Devices: A ParticipatoryDesign Study to Improve Digital Literacy . . . . . . . . . . . . . . . . . . . . . . . 139Matteo Zallio, John McGrory, and Damon Berry

Talking About Inclusiveness: How Inclusive Are TransportationApp Services? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Adriana Rodríguez-Villaseñor, Patricia Reyna-López,Alber Duque-Álvarez, Carlos Aceves-González, and Libertad Rizo-Corona

Emotional Design and Human Factors Design as Toolfor Understanding Efficiency in Information Design Processat Medical Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157Mariel Garcia-Hernadez, Fabiola Cortes-Chavez, Marco Marin-Alvarez,Alberto Rossa-Sierra, and Elvia Luz Gonzalez

Design for Inclusion in the Living Environment

Moving Beyond Visitor and Usability Studies: Co-designing Inclusionin Museums and Galleries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167Janice Rieger

Challenges of Universal Design in Coastal Resort Architectureand Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173Agata Bonenberg

Accessibility to Cultural Heritage from the Urban Systemto Museums. Innovative Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182Michela Benente, Valeria Minucciani, and Graziella Roccella

Inclusive Museums: From Physical Accessibilityto Cultural Appropriation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189Michela Benente and Valeria Minucciani

Bathroom Handrail Requirements for Use by the Elderly . . . . . . . . . . . 196Yoshiaki Goto, Satoshi Kose, Shinji Tanaka, and Hajime Yada

Beyond Walking: Improving Urban Mobility Equityin the Age of Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204Dadi An, Jiangchao Wang, Puxian Wang, Yuheng Yang, Yunchen Pu,Haorui Ke, and Yuqin Chen

Acceptable Handrail Diameter for Use by the Elderly . . . . . . . . . . . . . . 210Satoshi Kose, Yoshihide Sugimoto, and Yoshiaki Goto

Contents xv

A Holistic Approach to Inclusive Mobility Under Resilienceand Sustainability Goals: A Pilot Project in Brazil . . . . . . . . . . . . . . . . . 218Magaly Romao and Anabela Simoes

Interdisciplinary Design Education

“Grit” Assessment of First Year Design Students . . . . . . . . . . . . . . . . . . 227Benjamin Bush and Chris Arnold

Identity, Wayfinding and Construction for an Underserved Populationin Ecuador . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234David Smith

ID Case Study: The Value of Intellectual Property in InnovativeProduct Development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240Joyce Thomas

PET: Polyethylene Terephthalate – The Ubiquitous 500 mlWater Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248Clark Lundell and Joyce Thomas

Leveraging Design Competitions to Enhance Learning Goalsand Student Motivation Within a Studio Project . . . . . . . . . . . . . . . . . . 255Wendell Wilson and Young Mi Choi

Strategic Pathways for Interdisciplinary Design Education . . . . . . . . . . 261William Bullock

A Student Driven Model for Creative Pedagogy . . . . . . . . . . . . . . . . . . 268Angie Fahlman and Lois Frankel

Steps to Safer and More Sustainable Industrial Design Studios . . . . . . . 277George K. Chow

Project Pilot Run 2.ZeRo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284Adam Feld

Industrial Design + Horticulture: A Collaborative Approachto Greenhouse Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291Carlton R. Lay

Designer Thinking, A Unique Combination of Cognitive Modes . . . . . . 299Paul Skaggs

Interdisciplinary Approach to Industrial Design

Redefining User Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309James Rudolph

xvi Contents

The Role of Design in Consumer Behaviour: How Design CanInfluence Consumer Decision Making at a Point of Purchase . . . . . . . . 316Ruzbeh Irani and Lois Frankel

Designing an Experience Ecosystem on Campus . . . . . . . . . . . . . . . . . . 323Scott Shim

Ageless Design: A Design Method of Product Longevityfor Cross-Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330Yong-Gyun Ghim and Cliff Shin

Analysis of Design Elements of Automatic Household Food WasteComposting Machine Based on Perceptual Engineering . . . . . . . . . . . . . 338Chuyi Zhao and Huabin Wang

Have the Display Illumination Design Misled Customers on ColorPerception? A Study on Differences of Color Caused by LED Lightingon Leather Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346Cong Xu, Chih-Fu Wu, Dan-Dan Xu, and Ying-Shan Lai

The Development Trend of Personalized Bank Card Designfrom a New Perspective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354Xinxiong Liu and Jingyang Du

A Conceptual Model for Designing Sustainable City Development . . . . . 360Amira Ashraf and Thomas Garvey

The Challenges of Interdisciplinary Participationand Anti-oppressive Principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370Dawson Clark and Lois Frankel

A Dimensional Themes’ Matrix for Identifying Design ProblemStructure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378Dabin Lee, Sangjin Joo, Soyoon Park, Hwang Kim, and KwanMyung Kim

Reconstructing Social Identity Through Physical Attractiveness . . . . . . 385Young Ae Kim and Qiuwen Li

Happiness Participatory Media: Cultural Differences in Happinesson Instagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394Qiuwen Li and Young Ae Kim

Collaboration to Improve Experience in Hospital Environments . . . . . . 403Kayla Daigle and Lois Frankel

Research on Emotional Interaction Designin Landscape Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410Jiang Yuhao

Contents xvii

Exploring the Potential Uses of Ocean Plastic and Public EngagementActivities for Raising Awareness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418Xingyu Tao

Interdisciplinary Approach to Digital Design

Application of Typical Technical Features in Industry 4.0 for ProductInnovation Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429Huabin Wang and Zhanwen Gan

Effects of Industry 4.0 on Human Factors/Ergonomics Designin 21st Century . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437Manutchanok Jongprasithporn, Nantakrit Yodpijit,Chanakamon Phaisanthanaphark, Yotsuda Buranasing,and Teppakorn Sittiwanchai

Human-Machine Interaction Design Process for Complex ProductSystems as Spacesuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444Gang Liu, Li Huang, Mengyin Jiang, and Yi Su

Integration of Multi-domain-Simulation into the Designof Cyber-Physical Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451Tanja Steinbach, Yübo Wang, Vladimir Kutscher, and Reiner Anderl

Integrated Keyword Mapping Process: Bridging User Researchto Style Concept Development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457Sangjin Joo, Dabin Lee, Soyoon Park, Hwang Kim, and KwanMyung Kim

Emotional Interaction Design for Driverless Food Truck UnderCampus Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464Ming Yan, Jianmin Wang, and Wenjuan Wang

Interdisciplinary Approach to Design Innovation

An Interdisciplinary Approach to Accessible Museum Exhibitions . . . . 475Carla Ayukawa and Lois Frankel

An Interdisciplinary Framework for DesigningAdaptive Snowsports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484Lindsay McCauley and Lois Frankel

Case Study of Cultural Design Innovation Enabling BrandDevelopment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491Huabin Wang and Lei Han

Innovation’s DNA in Postmodern Society Age . . . . . . . . . . . . . . . . . . . . 498Ekaterina Barcellos, Galdenoro Botura Jr., and Lívia Inglesis

xviii Contents

Exploration and Practice of Industry-Education Integrationin Design Schools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506Wei Ding, Xinyao Huang, and Dadi An

Research and Practice of Whole Process Product Design InnovationTheory System Based on Service Design Thinking . . . . . . . . . . . . . . . . . 514Wei Ding, Defang Chen, and Junnan Ye

Product Design Education for Circular Economy . . . . . . . . . . . . . . . . . 519José Vicente

Interdisciplinary Approach to Design Manufacturing

Analysis of the Components of the Scene System and ItsCharacteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529Yan Wang and Jiadong Han

Sound Design for Electric Vehicles: Lessons and RequirementsLearned from a Chinese Automobile Manufacturer . . . . . . . . . . . . . . . . 537Yang Zhao, Hua Dong, and Long Liu

Design of Doll’s Arm Based on Shape Memory Alloy Actuator . . . . . . . 544Danying Liu, Xifan Ding, Mingjiang Jin, and Shanang He

Integration of Consumer Electronics Products Designed in Mexico . . . . 551Carlos Garnier-Ortiz, Alberto Rossa-Sierra, and Fabiola Cortes-Chavez

Extracting Contour Shape of Passenger Car Form in Front QuarterView Based on Form Similarity Judgement by YoungChinese Consumers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 558Chunrong Liu, Yuchun Shi, and Minghua Zhang

Human Factors Research Methods for Hand and Tool Design

Lend a Hand for 3D Scans: Scanning Methodology and DataCollection for Tool and Glove Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 567Bethany Juhnke, Colleen Pokorny, Linsey Griffin, and Susan Sokolowski

Qualitative Survey Methodology and Data Collection for PerformanceGlove Design and Fit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 575Susan L. Sokolowski, Linsey Griffin, Bethany Juhnke, Colleen Pokorny,and Chrissy Bettencourt

How Sport-Specific Hand Positioning Can Inform Gloveand Mitt Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 582Susan L. Sokolowski, Carly Anderson, and Sarah Klecker

A Visible Functional Grasp to Measure the Complete Hand . . . . . . . . . 589Colleen Pokorny, Bethany Juhnke, and Linsey Griffin

Contents xix

Investigation of 3D Functional Grip Shape to Design Products for DogWalking and Hiking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 597Susan L. Sokolowski, Chrissy Bettencourt, and Jennifer Null

Human Factors Design of Digital Information Systems for InspectionBody (IB) in Industry 4.0 Era . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605Manutchanok Jongprasithporn, Nantakrit Yodpijit, Danitar Tontoh,and Teppakorn Sittiwanchai

Kansei Engineering

Pilot Study of Kansei Human Machine Interface for PreventionSystem of Unintended Acceleration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615Toshio Tsuchiya, Kanon Watanabe, Mizuki Hirano, Kotaro Kuma,and Shintaro Wakamatsu

Meaning and Approach of New Product Designing ThroughKansei Engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621Yuuki Shigemoto

Real, Augmented, Virtual, and Robotic Animals in Smartand Playable Cities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 627Anton Nijholt

On the Role of “Muscle Memory” in Interaction Design . . . . . . . . . . . . 634Miao Liu and Xingchun Yang

UX Design for Mobile Application of E-Commerce Siteby Using Kansei Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 641Yuiko Mimura, Toshio Tsuchiya, Kaho Moriyama, Kanna Murata,and Sana Takasuka

Research on the Color of Physiotherapy Equipment - Exampleof the Lower Limb Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 648Peng Jyun Liu

Young Chinese Consumers’ Perception of Passenger Car Formin Side View Analyzed with Quantitative and Qualitative Methods . . . . 662Chunrong Liu, Kui Gao, and Qichang He

Examining the Incidence of Intuitiveness and Cognitive-AffectiveStates in the Kansei and Rating of Mobile Apps . . . . . . . . . . . . . . . . . . 669Sandrine Fischer

Research on Hospital Self-service Machine Interaction Design Basedon Kansei Engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 676Zhengyu Shi, Huifang Shang, Chuanshun Wang, Zhengyu Wang,and Meiyu Zhou

xx Contents

Kansei Evaluation Based on Quantifying the Identityof Smartphone Shape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 689Koki Chiba, Namgyu Kang, Jiuqiang Fu, Dongjin Seo,Khongthat Thongphun, Liu Jiehong, and Mohd Khairul Hussin

Proposal of System Based on Kansei Evaluation of Influenceof the Margin Ratio of Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 696Shunsuke Ono and Namgyu Kang

Verification of Effectiveness with Sound Using Metaphor for Typingon Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 703Noriki Fukatsu and Namgyu Kang

Proposal of Kansei Communication Tool for SNS Based on CombiningVerbal and Non-verbal Communication . . . . . . . . . . . . . . . . . . . . . . . . . 710Sadahiro Suzuki and Namgyu Kang

Proposal and Kansei Evaluation of a Garbage Can to Change HumanBehaviour Based on Fun Theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 717Masayuki Takahashi and Namgyu Kang

Human Factors for Textile and Society

The Importance of Textiles in the User Experience in Interiorand Furniture Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 727Rui Carreto and Catarina Carreto

The Shape of Desire: Knitwear and the Body . . . . . . . . . . . . . . . . . . . . 733Gianni Montagna, Cristina Carvalho, Carla Morais,and Maria Antonietta Sbordone

Ancient Activities Improved by Design . . . . . . . . . . . . . . . . . . . . . . . . . . 741Isabel Bieger, Cristina Carvalho, and Gianni Montagna

Long-Line Composite Floating Modular System for ControlledGrowth of Mytilus Galloprovincialis Mussels and the Developmentof Crassostrea Gigas Oysters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 748Alexandra Ene and Carmen Mihai

Design Artisan and Art: Development of a Textile Collectionin Contemporary Fashion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 754Ana Margarida Fernandes and Isabele Lavado

Apparel Design and Textile Engineering

Hierarchical Model of “Feeling of Luxury:” Genuineand Artificial Leather Case Study . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 763Shuhei Watanabe and Takahiko Horiuchi

Contents xxi

Innovative Filtering Systems for High TemperatureChemical Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 770Carmen Mihai and Alexandra Ene

Unique Natural Fibers: Physicochemical Characteristicsof Lignin-Cellulosic Fibers from Aechmea Bromeliifolia Leaves . . . . . . . 777Rayana Santiago de Queiroz, Ana Cristina Broega,and António Pedro Garcia Valadares Souto

Underwear in Personal Wardrobe – A Study About Consumptionand Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 785Carla Morais, Gianni Montagna, and Ana Sousa

The Senior Target Audience: When the Body Does Not Keep Upwith the Youthful Spirit, the Clothing Design Gives a ReplyThrough Comfort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 792Mariana Dias de Almeida, Ana Cristina da Luz Broega,and Marizilda dos Santos Menezes

Active Sportswear for Older Consumers . . . . . . . . . . . . . . . . . . . . . . . . 801Laura Piccinini, Gianni Montagna, and Cristina Carvalho

5D Virtual Model for Thermal Comfort and Ergonomics AssessmentApplied in Clothing Industries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 809Consuelo Latorre-Sánchez, Mateo Izquierdo, Alejandro Conde,Eduardo Parrilla, Alfredo Ballester, Jose Laparra-Hernández,Juan Carlos Gonzalez, and Sandra Alemany

The Virtualization of the Fashion Product . . . . . . . . . . . . . . . . . . . . . . . 820Luís Ricardo Santos, Gianni Montagna, and Maria João Pereira Neto

Effect of the Size of the Covered Area of the Chest Surfaceon Pressure Sensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 831Tamaki Mitsuno and Tomomi Aruga

Research on the Body Shape of Clothing for Chinese Adult . . . . . . . . . 841Linghua Ran, Chaoyi Zhao, Hong Luo, Xin Zhang, and Taijie Liu

Smart Sportswear Design for Down Syndrome Patients . . . . . . . . . . . . . 847Ying-Chia Huang, Jen-Hau Chen, Guan-Yin Chen, and Kai Fang Tung

Effect of Fatigue of the Protective Clothing Wearer on Body BalancePerformance Caused by Shorten or Prolonged Workloadwith Heat Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 856Suyoung Son and Ken Tokizawa

Textile Historical Sustainability and Innovative Textile Products . . . . . . 862Eleonora Trivellin, Giuseppe Lotti, Marco Marseglia, Elisa Matteucci,Margherita Vacca, Irene Fiesoli, Claudia Morea, Alessio Tanzini,Francesco Cantini, and Lu Ji

xxii Contents

Coordinating for Emotional Satisfaction

From Control to Coordination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 873Shuichi Fukuda

Color in Glossolalia: Green in Western Culture (Part I) . . . . . . . . . . . . 879Leonor Ferrão

Predicting Attitudes Towards Advertisement Strategy Basedon Personality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 885Ezekiel B. Skovron and Kim-Phuong Vu

Research and Practice on the Design Method of Cultural Outputfor Small Commodities Based on “Without Thought Design” . . . . . . . . 892Junnan Ye, Siyao Zhu, Menglan Wang, Jingyang Wang, and Xu Liu

The Creation of Aesthetic Conception on Landscape Space ThroughInformation Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 899Shuwang Zhao

Motor Control of Hand Force for Visual Indicator WithoutHand Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 907Takashi Oyama and Teruaki Ito

Style and Color Design of Technology Packaging . . . . . . . . . . . . . . . . . 913Lung-Wen Kuo, Chih-Chun Lai, and Ming-Chi Hsieh

A Methodology for Designing Meaningful Interactionsin Public Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920Liang Tan

Case Study: How Design Students Tailor Their CrowdfundingPresentation to Different Audiences . . . . . . . . . . . . . . . . . . . . . . . . . . . . 927Jose Rivera-Chang

Research on the Application of Traditional Cultural Elementsin the Design of Bank Card Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 932Yun-chen Xi and Xin-xiong Liu

The Construction of Story-Telling Illustrationin Tea Packaging Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 938Ren Long, Lu Geng, and Chenyue Sun

Affective Value and Kawaii Engineering

Analysis of Factors Affecting Luxury of Images of Cooked Dishes . . . . . 947Yuri Hamada, Yumi Takei, and Hiroko Shoji

Differences of Image Words for Clothes Dependingon Fashion Brands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 953Yuri Hamada, Takahiro Tanaka, and Hiroko Shoji

Contents xxiii

Preliminary Study on Color Therapy Effect Evaluationby the Emotion Estimation Method with Biological Signals . . . . . . . . . . 957Yohei Kawakami, Makoto Komazawa, Chen Feng, and Midori Sugaya

Comparing Subjective and Objective Evaluations of the Ratioof Visible Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 964Momoko Kawakami, Masayoshi Tanishita, and Michiko Ohokura

Color Analysis of Popular Lipstick Brands . . . . . . . . . . . . . . . . . . . . . . 971Peeraya Sripian, Keiko Miyatake, Kejkaew Thanasuan,and Michiko Ohkura

Sensory Engineering and Emotion

Comparison of Object-Based Three-Dimensional Sound and AmbientSound for Straight Walking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 981Keiichi Muramatsu, Shigekimi Tsukada, Kazunori Kaede,and Keiichi Watanuki

Chaotic Analysis of Finger Plethysmogram During AromaExposure for Evaluating Emotions and Examination of OptimalAnalysis Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 987Tomofumi Sakata, Keiichi Watanuki, Kazunori Kaede,and Keiichi Muramatsu

Exploring User Experience of Music Social Mode - Take NetEaseCloud Music as an Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 993Han Wang and RongRong Fu

Evaluation of the Attention Effect of the Fraser-Wilcox Illusionin a Visual Discrimination Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000Kota Tokonabe, Keiichi Watanuki, Kazunori Kaede,and Keiichi Muramatsu

Visualization of Features in Multivariate Gait Data: Use of a DeepLearning for the Visualization of Body Parts and Their Timing DuringGait Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1007Yusuke Osawa, Keiichi Watanuki, Kazunori Kaede,and Keiichi Muramatsu

A Comparative Study on the Communication Effect of StagePerformance Promotion Platforms Based on User Experience . . . . . . . . 1014Jingyi Ji, Rongrong Fu, and Jianxin Cheng

The Influence of Video Barrage on the Emotion of Young Users . . . . . . 1022Shanang He and Fumie Muroi

Author Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1029

xxiv Contents