Application• Explosionproof control centers are used where hazardous
materials are handled or stored. • Grouping push buttons, switches, pilot devices and glass
lenses in one enclosure will satisfy a wide range of control applications. This is most beneficial when having areas with minimum space or needing to centralize all controls in one area.
Features• Precision machined flame path between body and cover.• Bolt on stainless steel slotted mounting feet. • Flexible hinge mounting on either side, (hinges standard on
121206 and above).• External flange maximizes internal space.• Wall thickness suitable for minimum of five full threads.• Factory assembled and wired to specifications.• Operators are spaced on 2-1/2” centers.• All push buttons and selector switches have stainless steel
shafts.• Push button and selector switches are rated 10 Amp 600 Vac• Pilot lights are rated 6 Vac up to 600 Vac with transformer.• Round windows available in a wide range of sizes.• Provision for mounting pan.• Ground lug package and installation instructions for termination
of ground wires enclosed.• O-ring gasket insures watertight integrity.
Standard Materials• Bodies and covers: sand cast copperfree (4/10 of 1% max.)
aluminum• Cover bolts and mounting feet: stainless steel• O-Ring: neoprene
Standard Finish• Bodies and covers: shot blast finish
Options• Custom drilling and tapping.• Gray epoxy powder coat available to provide NEMA 4X rating.
Add suffix -G2.• ATEX complete product certification add suffix -X. • ATEX U Component certification add suffix -XU.• For window installed option, contact your local representative
for maximum number of operators.
Certifications and Compliances• UL Standards: UL 1203• UL Classified: E77137• UL Listed: Control Operators E87975• CSA Standards: C22.2 No. 14-M, C22.2 No. 24, C22.2 No. 30• CSA Certified: 042130
• Certification Type JBEW U2 — Gas, Zones 1 and 2 – Conforming to ATEX 94/9/CE: CE 0081 II 2 G – ATEX/IEC Protection: Ex d IIB + H2 — Dust, Zones 21 and 22 – Conforming to ATEX 94/9/CE: CE 0081 II2 D – ATEX/IEC Protection: Ex tD A21 — Ambient Temperature: -40 °F/-40 °C to 131 °F/55 °C — CE Declaration of Conformity: 5C239 — ATEX Certificate: LCIE 06 ATEX 0010U — IECEx Certificate: IECEx LCI 08.001X — Internal Volume: > 2dm3 (2 liters)• Ingress Protection (solid and liquid): IP66• Impact Resistance (shock): IK10• Ex Standards: EN/IEC 60079-0; 60079-1; 61241-0; 61241-1• Other Standards: EN/IEC 60529 (IP), 62262 (IK)
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4, 7BCD, 9EFGZone 1 and 2 – 21 and 22
II 2 GD
ATEX / IEC IP66 – IK10
ACSEW Cast Control CentersExplosionproof, Dust-Ignitionproof
ControlsCONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SW
ACSEW303816 (4) 9.00/228.6 130 13 10 1.75/44.5 4.00 800/362.9 AMH6Due to the nature of the sand cast process, external dimensions are subject to vary +/- 0.125”/3.2 mm.‡ With window installed contact your local representative for maximum number of operators.† ATEX complete product certification will bear an X suffix. ATEX U Component certification will bear an XU suffix.
ACSEW Cast Control Center Options and AccessoriesExplosionproof, Dust-Ignitionproof
Round Windows Square Windows
Catalog Number Description Contact your local representative
AW5 3” Viewing Area, Round Group BAW6 4” Viewing Area, Round Group B Circuit Breaker Operators
AW7 5” Viewing Area, Round Group B Catalog Number DescriptionAW10 7” Viewing Area, Round Group B AV1W 150AF Circuit Breaker MechanismAW12 9” Viewing Area, Round Group B AV2W 250AF Circuit Breaker Mechanism
Options
FactoryInstalled
Suffix
FieldInstalled
Catalog Number DescriptionAB N/A Set of 4 standoffs 1/2” highBR BRTB4X Breather, NEMA 4X (includes outlet and installation)DN DRNB4X Drain, NEMA 4X (includes outlet and installation)EGS N/A External grounding stud 3/8”-16G1 N/A Gray Powder Coat Epoxy (outside)G2 N/A Gray Powder Coat Epoxy (inside and outside)H Hinges stainless steel
AHOF12SS Hinge Kit, 2 light duty SS hinges AHOF22SS Hinge Kit, 2 heavy duty SS hinges AHOF23SS Hinge Kit, 3 heavy duty SS hingesK * N/A Terminal blocks 600 Vac, 30 Amp (example: 5 points = 5K)NP N/A Plastic nameplate, 2” x 4”, 1/8” black letters on white surface, 3 lines max, specify legend.NPSM75 N/A 3/4” NPSM Drill and Tap
Z See Options and Accessories Mounting pan
Mounting Hardware Drill and Tap Options
Field InstalledCatalog Number Description Symbol
Conduit Size (Inches - NPT)
AMH11/4” - 20 X 1-1/4” Bolt, A 1/21/4” - 20 Hex Nut, 1/4” Washers B 3/4
AMH23/8” - 16 X 1-1/4” Bolt, C 13/8” - 16 Hex Nut, 3/8” Washers D 1-1/4
AMH37/16” - 14 X 1-3/4” Bolt, E 1-1/27/16” - 14 Hex Nut, 7/16” Washers F 2
AMH41/2” - 13 x 1-3/4” Bolt, G 2-1/21/2” - 13 Hex Nut, 1/2” Washers H 3
AMH51/2” - 13 X 2” Bolt, J 3-1/21/2” - 13 Hex Nut, 1/2” Washers K 4
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass III NEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Push Button ComponentsMomentary Contact. Explosionproof
AEPBA AEPDGRA
Single Push Buttons Dual Push Buttons
Contacts †Button Color
Catalog Number
Contacts † Button Color
Catalog Number
Short Barrel Long Barrel Short Barrel Long Barrel
1 NO Black AEPBA AEPBA-L 2 NO Green/Red AEPDGRB AEPDGRB-L
1 NO Red AEPRA AEPRA-L 2 NO Black/Black AEPDBBB AEPDBBB-L
1 NO Green AEPGA AEPGA-L 2 NC Green/Red AEPDGRD AEPDGRD-L
2 NO Black AEPBB AEPBB-L 2 NC Black/Black AEPDBBD AEPDBBD-L
2 NO Red AEPRB AEPRB-L 1 NO and 1 NC Green/Red AEPDGRE AEPDGRE-L
2 NO Green AEPGB AEPGB-L 1 NO and 1 NC Black/Black AEPDBBE AEPDBBE-L
1 NC Black AEPBC AEPBC-L 2 NO and 2 NC Green/Red AEPDGRF AEPDGRF-L
1 NC Red AEPRC AEPRC-L 2 NO and 2 NC Black/Black AEPDBBF AEPDBBF-L
1 NC Green AEPGC AEPGC-L
2 NC Black AEPBD AEPBD-L
2 NC Red AEPRD AEPRD-L
2 NC Green AEPGD AEPGD-L
1 NO and 1 NC Black AEPBE AEPBE-L
1 NO and 1 NC Red AEPRE AEPRE-L
1 NO and 1 NC Green AEPGE AEPGE-L
2 NO and 2 NC Black AEPBF AEPBF-L
2 NO and 2 NC Red AEPRF AEPRF-L
2 NO and 2 NC Green AEPGF AEPGF-L
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.† NO = Normally Open; NC = Normally Closed.
Catalog Numbering Guide
AE P D B A L
Appleton Explosionproof Color:B - BlackR - RedG - Green
Push Button Contact Arrangement:A - 1 NOB - 2 NOC - 1 NCD - 2 NCE - 1 NO and 1 NCF - 2 NO and 2 NC
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass III NEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Pilot Light ComponentsExplosionproof
Standard Guarded
Voltage Lens ColorPilot Light Catalog Number Guarded Pilot Light Catalog Number
Short Barrel Long Barrel Short Barrel Long Barrel
120 Vac/Vdc Pigtail
Amber AEPL1A AEPL1A-L AEPLG1A AEPLG1A-L
Red AEPL1R AEPL1R-L AEPLG1R AEPLG1R-L
Green AEPL1G AEPL1G-L AEPLG1G AEPLG1G-L
Clear AEPL1C AEPL1C-L AEPLG1C AEPLG1C-L
Blue AEPL1B AEPL1B-L AEPLG1B AEPLG1B-L
240 VacTransformerw/120 Vac Lamp
Amber AEPL2A AEPL2A-L AEPLG2A AEPLG2A-L
Red AEPL2R AEPL2R-L AEPLG2R AEPLG2R-L
Green AEPL2G AEPL2G-L AEPLG2G AEPLG2G-L
Clear AEPL2C AEPL2C-L AEPLG2C AEPLG2C-L
Blue AEPL2B AEPL2B-L AEPLG2B AEPLG2B-L
120 VacTransformerw/6 Vac Lamp
Amber AEPL3A AEPL3A-L AEPLG3A AEPLG3A-L
Red AEPL3R AEPL3R-L AEPLG3R AEPLG3R-L
Green AEPL3G AEPL3G-L AEPLG3G AEPLG3G-L
Clear AEPL3C AEPL3C-L AEPLG3C AEPLG3C-L
Blue AEPL3B AEPL3B-L AEPLG3B AEPLG3B-L
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass III NEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Pilot Light ComponentsExplosionproof
Voltage Lens ColorPilot Light Catalog Number Guarded Pilot Light Catalog Number
Short Barrel Long Barrel Short Barrel Long Barrel
480 VacTransformerw/120 Vac Lamp
Amber AEPL4A AEPL4A-L AEPLG4A AEPLG4A-L
Red AEPL4R AEPL4R-L AEPLG4R AEPLG4R-L
Green AEPL4G AEPL4G-L AEPLG4G AEPLG4G-L
Clear AEPL4C AEPL4C-L AEPLG4C AEPLG4C-L
Blue AEPL4B AEPL4B-L AEPLG4B AEPLG4B-L
600 VacTransformerw/120 Vac Lamp
Amber AEPL5A AEPL5A-L AEPLG5A AEPLG5A-L
Red AEPL5R AEPL5R-L AEPLG5R AEPLG5R-L
Green AEPL5G AEPL5G-L AEPLG5G AEPLG5G-L
Clear AEPL5C AEPL5C-L AEPLG5C AEPLG5C-L
Blue AEPL5B AEPL5B-L AEPLG5B AEPLG5B-L
6 Vac/Vdc Pigtail
Amber AEPL6A AEPL6A-L AEPLG6A AEPLG6A-L
Red AEPL6R AEPL6R-L AEPLG6R AEPLG6R-L
Green AEPL6G AEPL6G-L AEPLG6G AEPLG6G-L
Clear AEPL6C AEPL6C-L AEPLG6C AEPLG6C-L
Blue AEPL6B AEPL6B-L AEPLG6B AEPLG6B-L
12 Vac/Vdc Pigtail
Amber AEPL7A AEPL7A-L AEPLG7A AEPLG7A-L
Red AEPL7R AEPL7R-L AEPLG7R AEPLG7R-L
Green AEPL7G AEPL7G-L AEPLG7G AEPLG7G-L
Clear AEPL7C AEPL7C-L AEPLG7C AEPLG7C-L
Blue AEPL7B AEPL7B-L AEPLG7B AEPLG7B-L
24 Vac/Vdc Pigtail
Amber AEPL8A AEPL8A-L AEPLG8A AEPLG8A-L
Red AEPL8R AEPL8R-L AEPLG8R AEPLG8R-L
Green AEPL8G AEPL8G-L AEPLG8G AEPLG8G-L
Clear AEPL8C AEPL8C-L AEPLG8C AEPLG8C-L
Blue AEPL8B AEPL8B-L AEPLG8B AEPLG8B-L
48 Vac/Vdc Pigtail
Amber AEPL9A AEPL9A-L AEPLG9A AEPLG9A-L
Red AEPL9R AEPL9R-L AEPLG9R AEPLG9R-L
Green AEPL9G AEPL9G-L AEPLG9G AEPLG9G-L
Clear AEPL9C AEPL9C-L AEPLG9C AEPLG9C-L
Blue AEPL9B AEPL9B-L AEPLG9B AEPLG9B-L
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass III NEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Lighted Push Button ComponentsMomentary Contact. Explosionproof
Contacts †Lens Color
Catalog Number Contacts †
Lens Color
Catalog Number Short Barrel Long Barrel Short Barrel Long Barrel
1 NO Amber AEPTAA AEPTAA-L 2 NC Amber AEPTAD AEPTAD-L
1 NO Red AEPTRA AEPTRA-L 2 NC Red AEPTRD AEPTRD-L
1 NO Green AEPTGA AEPTGA-L 2 NC Green AEPTGD AEPTGD-L
1 NO Clear AEPTCA AEPTCA-L 2 NC Clear AEPTCD AEPTCD-L
1 NO Blue AEPTBA AEPTBA-L 2 NC Blue AEPTBD AEPTBD-L
2 NO Amber AEPTAB AEPTAB-L 1 NO and 1 NC Amber AEPTAE AEPTAE-L
2 NO Red AEPTRB AEPTRB-L 1 NO and 1 NC Red AEPTRE AEPTRE-L
2 NO Green AEPTGB AEPTGB-L 1 NO and 1 NC Green AEPTGE AEPTGE-L
2 NO Clear AEPTCB AEPTCB-L 1 NO and 1 NC Clear AEPTCE AEPTCE-L
2 NO Blue AEPTBB AEPTBB-L 1 NO and 1 NC Blue AEPTBE AEPTBE-L
1 NC Amber AEPTAC AEPTAC-L 2 NO and 2 NC Amber AEPTAF AEPTAF-L
1 NC Red AEPTRC AEPTRC-L 2 NO and 2 NC Red AEPTRF AEPTRF-L
1 NC Green AEPTGC AEPTGC-L 2 NO and 2 NC Green AEPTGF AEPTGF-L
1 NC Clear AEPTCC AEPTCC-L 2 NO and 2 NC Clear AEPTCF AEPTCF-L
1 NC Blue AEPTBC AEPTBC-L 2 NO and 2 NC Blue AEPTBF AEPTBF-L
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.† NO = Normally Open; NC = Normally Closed.
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass III NEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Mushroom Head Push Button ComponentsMomentary Contact. Explosionproof
Contacts †Lens Color
Catalog Number Contacts †
Lens Color
Catalog Number Short Barrel Long Barrel Short Barrel Long Barrel
1 NO Black AEPMBA AEPMBA-L 2 NC Black AEPMBD AEPMBD-L
1 NO Red AEPMRA AEPMRA-L 2 NC Red AEPMRD AEPMRD-L
1 NO Green AEPMGA AEPMGA-L 2 NC Green AEPMGD AEPMGD-L
2 NO Black AEPMBB AEPMBB-L 1 NO and 1 NC Black AEPMBE AEPMBE-L
2 NO Red AEPMRB AEPMRB-L 1 NO and 1 NC Red AEPMRE AEPMRE-L
2 NO Green AEPMGB AEPMGB-L 1 NO and 1 NC Green AEPMGE AEPMGE-L
1 NC Black AEPMBC AEPMBC-L 2 NO and 2 NC Black AEPMBF AEPMBF-L
1 NC Red AEPMRC AEPMRC-L 2 NO and 2 NC Red AEPMRF AEPMRF-L
1 NC Green AEPMGC AEPMGC-L 2 NO and 2 NC Green AEPMGF AEPMGF-L
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.† NO = Normally Open; NC = Normally Closed.
Catalog Numbering Guide
AE P M B A L
Appleton Explosionproof Color:B - BlackR - RedG - Green
Push Button Contact Arrangement:A - 1 NOB - 2 NOC - 1 NCD - 2 NCE - 1 NO and 1 NCF - 2 NO and 2 NC
Mushroom Head, Momentary Long Barrel:Omit for Short Barrel
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass III NEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Mushroom Head Push Button ComponentsMaintained Contact. Explosionproof
Contacts †Lens Color
Catalog Number Contacts †
Lens Color
Catalog Number Short Barrel Long Barrel Short Barrel Long Barrel
1 NO Black AEPMCBA AEPMCBA-L 2 NC Black AEPMCBD AEPMCBD-L
1 NO Red AEPMCRA AEPMCRA-L 2 NC Red AEPMCRD AEPMCRD-L
1 NO Green AEPMCGA AEPMCGA-L 2 NC Green AEPMCGD AEPMCGD-L
2 NO Black AEPMCBB AEPMCBB-L 1 NO and 1 NC Black AEPMCBE AEPMCBE-L
2 NO Red AEPMCRB AEPMCRB-L 1 NO and 1 NC Red AEPMCRE AEPMCRE-L
2 NO Green AEPMCGB AEPMCGB-L 1 NO and 1 NC Green AEPMCGE AEPMCGE-L
1 NC Black AEPMCBC AEPMCBC-L 2 NO and 2 NC Black AEPMCBF AEPMCBF-L
1 NC Red AEPMCRC AEPMCRC-L 2 NO and 2 NC Red AEPMCRF AEPMCRF-L
1 NC Green AEPMCGC AEPMCGC-L 2 NO and 2 NC Green AEPMCGF AEPMCGF-L
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.† NO = Normally Open; NC = Normally Closed.
Catalog Numbering Guide
AE P MC B A L
Appleton Explosionproof Color:B - BlackR - RedG - Green
Push Button Contact Arrangement:A - 1 NOB - 2 NOC - 1 NCD - 2 NCE - 1 NO and 1 NCF - 2 NO and 2 NC
Mushroom Head, Maintained Long Barrel:Omit for Short Barrel
ControlsCONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SW
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass III NEMA 4, 7BCD, 9EFG
ACSEW Miniature Control OperatorsExplosionproof
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. Miniature operators are NOT 3/4” NPSM.
Features• Installation centers reduced to 1” centers.• Allows selection of smaller enclosures.• 3/8 - 16 thread.• Stainless steel actuator shaft.• Solid silver contacts rated 6 Amps at 125 Vac, 3 Amps at
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass III NEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Selector Switch ComponentsExplosionproof
Two Position — Maintained Contact
Contact
Lever PositionX=Closed, O=Open
Catalog NumberContact Block Position
Cam LocationStandard Bushing
LongBushingLeft Right L R
1 O X AESS22MG AESS22MG-L NO - 2
1 X O AESS22MH AESS22MH-L NC - 2
1 O X AESS22ML AESS22ML-L NC NO 2
2 X O
1 O X AESS22MM AESS22MM-L NC NC 2
2 O X
1 X O AESS22MR AESS22MR-L NOC NOC 2
2 O X
3 X O
4 O X
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.
Catalog Numbering Guide
AE SS 2 1 B A L
Appleton Explosionproof Cam Location:1, 2 or 4
Long Barrel:Omit for Short Barrel
Selector Switch Function Type:M - MaintainedKM - Key MaintainedS - Spring ReturnKS - Keyed Spring Return
Position:2 or 3
Contact Arrangement:A - 1 NOB - 2 NOC - 1 NCD - 2 NCE - 1 NO and 1 NCF - 2 NO and 2 NC
ControlsCONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SW
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Selector Switch ComponentsExplosionproof
Two Position — Spring Return Right to Center
Contact
Lever PositionX=Closed, O=Open
Catalog NumberContact Block Position Cam
LocationStandard Bushing
LongBushingLeft Right L R
1 O X AESS22SG AESS22SG-L NO - 2
1 X O AESS22SH AESS22SH-L - NO 2
1 O X AESS22SL AESS22SL-L NO NO 2
2 X O
1 O X AESS22SM AESS22SM-L NO NC 2
2 O X
1 X O AESS22SR AESS22SR-L 2NC 2NC 2
2 O X
3 X O
4 O X
Three Position — Maintained Contact
Contact
Lever PositionX=Closed, O=Open
Catalog NumberContact Block Position Cam
LocationStandard Bushing
LongBushingLeft Center Right L R
1 O O X AESS31MN AESS31MN-L NO NO 1
2 X O O
1 X O O AESS31MQ AESS31MQ-L NOC NO 1
2 O X X
1 O O X AESS34MN AESS34MN-L NO NC 4
2 O X O
1 X O O AESS32MN AESS32MN-L NC NO 2
2 O X O
1 O O X AESS31MS AESS31MS-L 2NO 2NO 1
2 X O O
3 O O X
4 X O O
1 O O X AESS34MS AESS34MS-L 2NO 2NC 4
2 O X O
3 O O X
4 O X O
1 X O O AESS32MS AESS32MS-L 2NC 2NO 2
2 O X O
3 X O O
4 O X O
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. See options page for legend plates. All Operators are 3/4” NPSM.
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Selector Switch ComponentsExplosionproof
Three Position — Spring Return — Maintained Contact
Contact
Lever PositionX=Closed, O=Open
Catalog NumberContact Block Position Cam
LocationStandard Bushing
LongBushingLeft Center Right L R
1 O O X AESS31SN AESS31SN-L NC NC 1
2 X O O
1 X O O AESS31SQ AESS31SQ-L - NOC 1
2 O X X
1 O O X AESS34SN AESS34SN-L NC NC 4
2 O X O
1 X O O AESS32SN AESS32SN-L NC NC 2
2 O X O
1 O O X AESS31SS AESS31SS-L 2NC 2NC 1
2 X O O
3 O O X
4 X O O
1 O O X AESS34SS AESS34SS-L 2NC 2NC 4
2 O X O
3 O O X
4 O X O
1 X O O AESS32SS AESS32SS-L 2NC 2NC 2
2 O X O
3 X O O
4 O X O
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.
ControlsCONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SW
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Selector Switch ComponentsExplosionproof
Two Position — Key Operated †‡ — Maintained Contact
Contact
Lever PositionX=Closed, O=Open
Catalog NumberContact Block Position
CamLocation
Standard Bushing
LongBushingLeft Right L R
1 O X AESS22KMG AESS22KMG-L NO — 2
1 X O AESS22KMH AESS22KMH-L — NO 2
1 O X AESS22KML AESS22KML-L NO NO 2
2 X O
1 O X AESS22KMM AESS22KMM-L NO NC 2
2 O X
1 X O AESS22KMR AESS22KMR-L 2NC 2NC 2
2 O X
3 X O
4 O X
Two Position — Key Operated †‡ — Spring Return Right to Center
Contact
Lever PositionX=Closed, O=Open
Catalog NumberContact Block Position
CamLocation
Standard Bushing
LongBushingLeft Right L R
1 O X AESS22KSG AESS22KSG-L NO — 2
1 X O AESS22KSH AESS22KSH-L — NO 2
1 O X AESS22KSL AESS22KSL-L NO NO 2
2 X O
1 O X AESS22KSM AESS22KSM-L NO NC 2
2 O X
1 X O AESS22KSR AESS22KSR-L 2NC 2NC 2
2 O X
3 X O
4 O X
† Locks are normally provided keyed differently. If keyed-alike locks are required, specify suffix KA1 and a standard type of identical locks will be provided. If a unique set of keyed-alike locks is required, specify and contact your local representative for delivery.‡ Key removable from one field selectable position only. Contact your local representative for key removable in two positions.
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Selector Switch ComponentsExplosionproof
Three Position — Key Operated †‡ — Maintained Contact
Contact
Lever PositionX=Closed, O=Open
Catalog Number
Contact Block Position CamLocation
Standard Bushing
LongBushingLeft Center Right L R
1 O O X AESS31KMN AESS31KMN-L NC NC 1
2 X O O
1 X O O AESS31KMQ AESS31KMQ-L — NOC 1
2 O X X
1 O O X AESS34KMN AESS34KMN-L NC NC 4
2 O X O
1 X O O AESS32KMN AESS32KMN-L NC NC 2
2 O X O
1 X O O AESS31KMS AESS31KMS-L 2NC 2NC 1
2 O O X
3 X O O
4 O O X
1 O O X AESS34KMS AESS34KMS-L 2NC 2NC 4
2 O X O
3 O O X
4 O X O
1 X O O AESS32KMS AESS32KMS-L 2NC 2NC 2
2 O X O
3 X O O
4 O X O
† Locks are normally provided keyed differently. If keyed-alike locks are required, specify suffix KA1 and a standard type of identical locks will be provided. If a unique set of keyed-alike locks is required, specify and contact your local representative for delivery.‡ Key removable from one field selectable position only. Contact your local representative for key removable in two positions.
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.
ControlsCONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SW
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4, 7BCD, 9EFG
ACSEW Control Operators: Selector Switch ComponentsExplosionproof
Two Position — Key Operated †‡ — Spring Return
Contact
Lever PositionX=Closed, O=Open
Catalog Number
Contact Block Position CamLocation
Standard Bushing
LongBushingLeft Center Right L R
1 X O O AESS31KSN AESS31KSN-L NC NC 1
2 O O X
1 X O O AESS31KSQ AESS31KSQ-L — NOC 1
2 O X X
1 O O X AESS34KSN AESS34KSN-L NC NC 4
2 O X O
1 X O O AESS32KSN AESS32KSN-L NC NC 2
2 O X O
1 X O O AESS31KSS AESS31KSS-L 2NC 2NC 1
2 O O X
3 X O O
4 O O X
1 O O X AESS34KSS AESS34KSS-L 2NC 2NC 4
2 O X O
3 O O X
4 O X O
1 X O O AESS32KSS AESS32KSS-L 2NC 2NC 2
2 O X O
3 X O O
4 O X O
† Locks are normally provided keyed differently. If keyed-alike locks are required, specify suffix KA1 and a standard type of identical locks will be provided. If a unique set of keyed-alike locks is required, specify and contact your local representative for delivery.‡ Key removable from one field selectable position only. Contact your local representative for key removable in two positions.
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.
Class I, Division 1 and 2, Groups B, C, DClass II, Division 1 and 2, Groups E, F, GClass III NEMA 4, 7BCD, 9EFG
ACSEW Control Operator AccessoriesExplosionproof
Item DescriptionCatalog Number
360º Rotating Shaft
Manual operated shaft used for devices requiring external adjustment. The shaft is 1/4” diameter and is provided with a coupling to compensate for misalignment.
ARO250C
Standard Reset Button
Six-inch length can be field modified for specific length. Suitable for use in Class I, Groups B, C and D applications. AEPRS
For long barrel AEPRSL
Miniature Reset Button
Six-inch length can be field modified for specific length. Suitable for use in Class I, Groups B, C and D applications. 3/8 - 16 Threads.
AEPRM
Weather Cap For Push Button Devices
Field attachable weather cap snaps on easily without the use of adhesives.
Black PBCAPB
Green PBCAPG
Red PBCAPR
Plug
3/4” NPSM to plug unused openings. AA-9400
APO2
APO1
Potentiometer Operator
Operator for use with potentiometers having a 1/4” diameter by 7/8” long shaft. The operator is furnished with a control knob and dial plate marked 0 to 100.
APO1
Long bushing for applications where enclosure cover thickness is greater than 7/8”. APO2
NOTE: Use long barrel devices on enclosure applications with cover thickness exceeding 7/8 inch. For legend plates, see Options, Accessories and Nameplates. All Operators are 3/4” NPSM.
ControlsCONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SW
ACSEW Series Drill and Tap Schedule and Hinges and Back Pan Requirement FormCustomer's original purchase order must accompany completed form
Company Name
Shipping Address
Account Number Purchase Order Number
Part Number Purchase Order Date
Quantity Internal Order Number
PositionConduit
SizeDimension
"X"Dimension
"K"
12 11131415
4 5321
10
9
8
7
6
16
17
18
19
20
"K"
XX
SIDE "A"
SIDE "C"
SIDE "D" SIDE "B"
ALT HINGE
STD
HIN
GE
12 11131415
4 5321
10
9
8
7
6
16
17
18
19
20
"K"
XX
SIDE "A"
SIDE "C"
SIDE "D" SIDE "B"
ALT HINGES
TD H
ING
E
12 11131415
4 5321
10
9
8
7
6
16
17
18
19
20
"K"
XX
SIDE "A"
SIDE "C"
SIDE "D" SIDE "B"
ALT HINGE
STD
HIN
GE
12 11131415
4 5321
10
9
8
7
6
16
17
18
19
20
"K"
XX
SIDE "A"
SIDE "C"
SIDE "D" SIDE "B"
ALT HINGES
TD H
ING
E
12 11131415
4 5321
10
9
8
7
6
16
17
18
19
20
"K"
XX
SIDE "A"
SIDE "C"
SIDE "D" SIDE "B"
ALT HINGE
STD
HIN
GE
X = distance on center between drilled and tapped holes
K = distance from bottom of enclosure to the center of drilled and tapped holes
1
2
3 CL
4
5
6
7
8 CL
9
10
11
12
13 CL
14
15
16
17
18 CL
19
20
Yes No
Entries Required: Standard Hinges Required: Alternate Hinges Required: Back Pan Required: Factory to locate X and K * * If No is checked, the X and K dimensions must be supplied in Schedule above.
![JUKI £j]shveiprom.com/cats/SCHMETZ/JUKI-KANSAI.pdf · juki £j] aec - 143 \ aec - 155 aec - 275-ss30n-sa42 aec-1500 aec - 2500 aec - 2700 afu - 333 ahc - 142 alh - 252 als 185-a](https://static.documents.pub/doc/80x56/5e8a1bf31f655643d2300f31/juki-j-juki-j-aec-143-aec-155-aec-275-ss30n-sa42-aec-1500-aec-2500.jpg)
