Date post: | 25-Apr-2017 |
Category: |
Documents |
Upload: | piyush-singh |
View: | 237 times |
Download: | 4 times |
OPTICAL CABLE
Fiber Optic Breakout Cable ONFR (rated), OFNP (Plenum rated) or LSZH rated
1/2www.opterna.com
Optical Fiber2.0mm Sub-Unit
Central atrengthMemberRipcordPVC Outer jacket
Sub-unit Jacket
Aramid Yarns0.9mm buffered Fiber
Features & Advantages:
Specifications:
Options:
Short and moderate distance links within a building, where multiple termination points are needed
•
OFNR (riser rated), OFNP (plenum rated) or LSZH (low smoke zero halogen rated)
•
Direct Termination on 2.0 mm Sub-Units•
ISO/IEC 11801•
Fiber - Single mode, 50, 62.5µm multi mode available
Subunit Identifications:The identification code & number is printed on the sub-unit jacket every 10 cm (eg. 62.5MM#1, 62.5MM#2)
• Higher fiber counts available upon request• Other Sub-Unit Diameters Available (1.8mm, 2.4 mm, 2.9mm etc.)
•
Buffered fiber : Natural (white)• For Sub-unit & Outer Jacket color- Single Mode 9/125 : Yellow- 62.5/125 OM1 1Gbe : Orange- 50/125 OM2 1Gbe : Orange- 50/125 OM3 10Gbe : Aqua- 50/125 OM4 10Gbe : Heather Violet
•
Telcordia GR-409-CORE• ANSI/ ICEA S-83-596•
Applications:Backbone & Computer Room Cabling• CCTV, Factory automation, Utility segments• Pre-terminated cable assemblies•
RoHS (Restriction of the use of Certain HazardousSubstances Directive) complied
•
Opterna fiber optic breakout cables are rugged, high performance optical communication cables suitable for inside plant installations. Fiber optic breakout cable contains multiple individual fibers each with its own aramid strength member and jacket which makes the cable more reliable and rugged for critical applications.
Breakout Cable is designed for routing cables to different locations and direct termination of fibers in the field. The cable is also suitable for pre-terminated cable assemblies.
OPTICAL CABLE
Fiber Optic Breakout Cable ONFR (rated), OFNP (Plenum rated) or LSZH rated
2/2
To learn more about our comprehensive portfolio, please contact your Opterna Sales Representative or visit our web site at www.opterna.com. This document is for informational or planning purposes only, and is not intended to create, modify or supplement any Opterna specifications or warranties relating to these products or services. Information and/or technical specifications supplied within this document do not waive (directly or indirectly) any rights or licenses including but not limited to patents or other protective rights - of Opterna or others. Specifications are subject to change without notice.
Doc. No. AE-COL-OC-PP-001- Rev00 Copyright © 2013 Opterna International. All rights reserved
FiberCount
[mm] [mm] [mm]
Nominal
Diameter
Nominal Weight[kg/km]
Maximum Tensile LoadShort Term Long Term
[N] [N]
Crush Load
Storage Temperature : -20 to + 70 / Operating Temperature : -10 to +60 °C
Short Term Long Term[N/cm] [N/cm]
Minimum Bend RadiusLoaded Installed
2
4
6
8
12
7.5
7.7
8
9.5
10.5
50
55
65
85
95
660
660
660
660
1320
300
300
300
300
660
35
35
35
35
35
13
13
13
13
13
150
154
160
190
210
75
77
80
95
105
Mechanical Characteristics:
Ordering Information:
FC-XXX-BTC-NA-YYY-NP-ZZ
FC-XXX-BTC-NA-YYY-NR-ZZFC-XXX-BTC-NA-YYY-LZ-ZZ
XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3, 655, OM1, OM2, OM3, OM4YYY : Number of CoresZZ : YL, OR, AQ, HV
Transmission Performance:
Optical Fiber
Attenuation (dB/km) Typical values
Minimum Bandwidth (MHz •km)
Ethernet Link Distance (m)
62.5/125 μm OM1(850/1300)
3.5/1.0
-10Gbps
1Gbps
50/125 μm OM2(850/1300)
3.0/1.0
500/500
-
200/500
50/125 μm OM3(850/1300)
3.0/1.0
300
1500/500
50/125 μm OM4(850/1300)
3.0/1.0
550
3500/500
9/125 μm OS2(1310/1550)
0.40/0.30
-
275/550 550/550 - - -
-