+ All Categories
Home > Documents > AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries...

AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries...

Date post: 24-Mar-2020
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
15
1 AEM2018 (Advanced Energy Materials) 10-12 September 2018, Lecture Theatre Block, University of Surrey, England https://www.advanced-energymaterials-conference.com/ Program at a glance Hours 10 September 2018 11 September 2018 12 September 2018 8.30-9.45 Registration Lecture Theatre Block Registration Lecture Theatre Block Registration Lecture Theatre Block 9.00-9.45 Coffee session Coffee session Coffee session 10.00-13.00 Inaugural address, Plenary,keynote, Invited & Oral presentations Plenary,keynote, Invited & Oral presentations Invited & Oral presentations 13.00-14.00 Lunch Lunch Lunch 14.00-17.30 Invited, Oral presentations Invited,Oral presentations Invited,Oral presentations 17.00-18.00 Coffee session Poster presentations & Coffee session Coffee Session 18.30 - Banquet at Surrey Sports Park. The bus will leave from Austin Pearce Building at 18.30 hours. - Inaugural Address 10 September 2018, 10.00 AM, Lecture Theatre D Professor G.Q. Max Lu (President and Vice-Chancellor, University of Surrey) Plenary talks- Lecture Theatre D Name Affiliation Country Date Time (Hours) Title Rob van Daalen Elsevier Netherland 10 Sep 10.15-10.45 The role of a reviewer Bradley Ladewig Imperial College London United Kingdom 10 Sep 10.45-11.15 Photo-responsive metal organic frameworks and gas separation membranes - new opportunities for smart separations Nigel Brandon Imperial College London United Kingdom 11 Sep 10.00-10.30 Materials engineering for fuel cells and batteries
Transcript
Page 1: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

1

AEM2018 (Advanced Energy Materials)

10-12 September 2018, Lecture Theatre Block, University of Surrey, England

https://www.advanced-energymaterials-conference.com/

Program at a glance

Hours 10 September 2018 11 September 2018 12 September 2018

8.30-9.45 Registration Lecture Theatre Block

Registration Lecture Theatre Block

Registration Lecture Theatre Block

9.00-9.45 Coffee session Coffee session Coffee session

10.00-13.00 Inaugural address, Plenary,keynote, Invited & Oral presentations

Plenary,keynote, Invited & Oral presentations

Invited & Oral presentations

13.00-14.00 Lunch Lunch Lunch

14.00-17.30 Invited, Oral presentations Invited,Oral presentations Invited,Oral presentations

17.00-18.00 Coffee session Poster presentations & Coffee session

Coffee Session

18.30

- Banquet at Surrey Sports Park. The bus will leave from Austin Pearce Building at 18.30 hours.

-

Inaugural Address 10 September 2018, 10.00 AM, Lecture Theatre D

Professor G.Q. Max Lu

(President and Vice-Chancellor, University of Surrey)

Plenary talks- Lecture Theatre D

Name Affiliation Country Date Time (Hours)

Title

Rob van Daalen Elsevier Netherland 10 Sep

10.15-10.45 The role of a reviewer

Bradley Ladewig

Imperial College London

United Kingdom

10 Sep

10.45-11.15 Photo-responsive metal organic frameworks and gas separation membranes - new opportunities for smart separations

Nigel Brandon Imperial College London

United Kingdom

11 Sep

10.00-10.30 Materials engineering for fuel cells and batteries

Page 2: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

2

Contents

Session Room* Page No.

AEM Lecture Theatre D 2

AGM Lecture Theatre B 4

ANM Lecture Theatre E 4

CEM Lecture Theatre B 6

CPM Lecture Theatre B 7

HE Lecture Theatre D 7

PEM Lecture Theatre E 8

SEM Lecture Theatre E 9

Posters Great Hall 10

Session AEM

10 September 2018, Lecture Theatre D

Session Chairs: Robert Slade, Libu Manjakkal, Daniel S.P. Lau

Time (Hours) Name Affiliation Country Title

11.20-11.40 Robert Slade

University of Surrey

United Kingdom

Revisiting molybdenum oxides for supercapacitive energy storage: persistent high capacitance with nanostructured materials

11.40-12.00 Daniel S.P. Lau

The Hong Kong Polytechnic University

Hongkong A Sodium-Ion Full Battery Based on K0.3MnO2 Nanosheets and KS6 Conductive Carbon

12.00-12.20 Libu Manjakkal

University of Glasgow

United Kingdom

Printable Electrodes for Flexible Supercapacitors

12.20-12.40 Tan Wai Kian

Toyohashi University of Technology

Japan Facile formation of Fe3O4 decorated carbon paper and its application for all solid state Fe-air battery

12.40-13.00 Aleksandar Staykov

Kyushu University

Japan Interaction of O2, H2O, and CO2 with SrO-terminated SrTiO3 Surface

Lunch

Session AEM

10 September 2018, Lecture Theatre D

Session Chairs: John Zhu, Vikram Dalal, Tan Sui

14.00-14.30 John Zhu (Keynote)

The University of Queensland

Australia From Materials Research to Commercialization: Solid Oxide Fuel Cells

14.30-14.50 Hayder A. Dhahad

University of Technology

Japan Experimental study of the effect of flow field design to PEM fuel cells performance

14.50-15.10 Pietro Staiti

Istituto di Tecnologie Avanzate per l’Energia

Italy Supercapacitor with AC/MnO2 electrodes supported on cotton fabric and polymer electrolyte membrane

15.10-15.30 Patrick Mensah

University of Maryland

USA Mechanical properties of 3-D printed smart composite mini wind turbines

Page 3: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

3

15.30-16.00 Tan Sui (Keynote)

University of Surrey

United Kingdom

Exploring and modelling chemical-structural relationship of Li-ion battery cathodes during charging and discharging

16.00-16.20 Vikram Dalal

Iowa State University

USA Physics And Modeling Of Photo-Induced Degradation Of Perovskite Solar Cells

Session AEM

11 September 2018, Lecture Theatre D

Session Chairs: Srinivas Gadipelli, Bart Roose, Charles Opoku

10.35-11.05 Emma Kendrick (Keynote)

University of Warwick

United Kingdom

Lithium and sodium ion battery manufacturing

11.05-11.25 Sathish Swaminathan

IIT Madras India Application of rapid impedance spectroscopy using multiple phase shifted chirp signals in diagnosis of electrochemical systems

11.25-11.45 Charles Opoku

University of Southampton

United Kingdom

Novel piezoelectric energy harvesting transducers based on low temperature piezoelectric modules and organic semiconducting materials

11.45-12.05 Bart Roose University of Cambridge

United Kingdom

Hydrogen Desorption Causes Performance Improving Effect in SnO2 Perovskite Solar Cells

12.05-12.25 Samira Kaci CRTSE Algeria Photoelectrical Properties of Single Crystal Silicon Solar Cells coated with porous Silicon Carbide-doped PVA composite as Luminescent Down-Shifting layer

12.25-12.45 Srinivas Gadipelli

UCL United Kingdom

Design of Earth-Abundant Electrocatalysts for Energy Conversion Reactions in Fuel Cells and Metal-Air Batteries

12.45-13.05 Yung-Hao Tsou

National University of Kaohsiung

Taiwan Electrospun Fe-N/C composite electrodes for Li-O2 batteries

13.05-13.20 Shubra Lalwani

Delhi University

India Multifunctional Carbon Aerogel derived from diesel soot

Session AEM

12 September 2018, Lecture Theatre D

Session Chairs: Gareth Hinds, Thirumany Sritharan, Giuseppe Cappelletti, Yongzhu Fu

10.00-10.30 Gareth Hinds (Keynote)

National Physical Laboratory

United Kingdom

Influence of microporous layer on corrosion of PEMFC metallic bipolar plates

10.30-10.45 Yongzhu Fu Zhengzhou University

China Polysulfide Cathode Materials for Rechargeable Lithium Batteries

10.45-11.00 Zheng-Ming Wang

AIST Japan Anchoring titanium dioxide on carbon microspheres for high-performance visible light photocatalysis

11.00-11.15 Thirumany Sritharan

NTU Singapore Developments in Hematite and Bismuth Vanadate Photoanodes for PEC Water Splitting

11.15-11.30 R. Pavul Raj IIT Madras India Surfactant-assisted Synthesis of LiFePO4/Carbon Composite: A Cathode Material for Li-ion Battery Application

11.30-11.45 Giuseppe Cappelletti

Università degli Studi di Milano

Italy Durable Modified Polyacrylic Coatings for Cultural Heritage Protection

Page 4: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

4

11.45-12.00 Surya K. Vatti IIT Madras India Ordered Mesoporous Titania, TMP-123: A New Class of Inorganic Solid and A Novel Photocatalyst for the Degradation of Pharmaceutical Pollutants

12.00-12.15 Alexander Herms

Kurt-Schwabe-Institut

Germany Highly sensitive coulometric titration of oxygen for the characterization of solid materials at elevated temperatures

12.15-12.30 Jingying Yao Kurt-Schwabe-Institut

Germany New composite material based on ceria and magnesia

12.30-12.45 M. S. Abu-Jafar

An-Najah N. University

Palestine Structural, electronic, elastic and optical properties of the SrTMO3 (TM=Rh, Zr) compounds: FP-LAPW study

Session AGM

10 September 2018, Lecture Theatre B

Session Chairs: Somnath C Roy, Ching-Yuan Ho, Eny Kusrini, João Ventura

14.00-14.20 Ching-Yuan Ho

Chung Yuan Christian University

Taiwan Diamine decorated graphene oxide film on quartz crystal microbalance for humidity-sensing analysis

14.20-14.40 Mihaela Kusko IMT-Bucharest

Romania Graphitized porous silicon electrodes for solid state supercapacitors

14.40-15.00 Qinglan Zhao The University of Queensland

Australia Flexible Hybrid Sodium-ion Capacitor Based on Freestanding Self-assembled Polyimide/Graphene Composite as Anode and RGO as Cathode

15.00-15.20 Eny Kusrini Universitas Indonesia

Indonesia Synthesis of Graphene Oxide and Phosphorylated Graphene

15.20-15.40 Amar Merazga

Taif University

Saudi Arabia

A model to account for graphene-induced efficiency enhancement in dye-sensitized solar cells based on graphene/TiO2 photoanodes

15.40-16.00 Somnath C Roy

IIT Madras India Enhanced Photoelectrochemical Water Splitting by Graphene Wrapped TiO2 Nanotubes

16.00-16.20 Aqsa Arshad International Islamic University

Pakistan Co3O4 decorated graphene for enhanced photocatalytic and antibacterial activity

16.20-16.40 Runcang Sun (Invited)

Beijing Key Laboratory

China Preparation and Characterization of Materials from Industrial Bioethanol by-products

16.40-17.00 Tawatchai Charinpanitkul

Chongqing University

Thailand Effect of structure of liquid hydrocarbons on formation of carbon nanotubes synthesized via co-pyrolysis with ferrocene

Session ANM

10 September 2018, Lecture Theatre E

Session Chairs: Luiz Pereira, João Pedro Araújo, Iñigo Díez-García, Hae Gon Lee

11.20-11.40 Iñigo D. García

University of Basque Country

Spain Nanostructured waterborne poly(urethane-urea) with PEO containing triblock copolymers as polyols

11.40-12.00 Hae Gon Lee

Yonsei University

Republic of Korea

Anisotropic Nanoscale And Sub-nanoscale Friction Behavior of Phosphorene

12.00-12.40 Bhanu B. Upadhyay

IIT Bombay

India Plasma Oxidized Thermally Grown Aluminum film as a Gate Dielectric for AlGaN/GaN MISHEMTs

Page 5: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

5

12.40-13.00 Nur Amalina Sabuan

University Malaysia Pahang

Malaysia Microstructural and process characterization on the Electrical Conductivity and Electrical Discharge Machinability of Al2O3-based ceramic composites

Session ANM

11 September 2018, Lecture Theatre E

Session Chairs: Liqiang Mai, Hui-Ming Cheng, Yongxin Pang

10.35-11.05 Hui-Ming Cheng (Keynote)

Institute of Metal Research

China Graphene Materials: Fabrication and Use in Electrochemical Energy Storage

11.05-11.35 Liqiang Mai (Keynote)

Wuhan University of Technology

China One Dimensional Nanomaterials for Emerging Energy Storage

11.35-11.55 Ishara Dharmasena

University of Surrey

United Kingdom

Power Generation and Output Optimization of Triboelectric Nanogenerators

11.55-12.15 Maxim G. Kozodaev

Moscow Institute of physics & technology

Russia La-doped HZO thin films for high efficiency integrated supercapacitors

12.15-12.35 Yongxin Pang

Teesside University

United Kingdom

Nanocomposite coatings for high temperature insulation of electrical wires

12.35-12.55 Shankar I Patil

Savitribai Phule Pune University

India Effect of sintering temperature on magnetic and electronic properties of nanocrystalline La0.7Sr0.3MnO3

Session ANM

12 September 2018, Lecture Theatre E

Session Chairs: Tawatchai Charinpanitkul, Alvin Orbaek White, Sweety Sarma

10.00-10.20 Fares Almomani

Qatar University

Qatar Photocatalytic conversion of CO2 and H2O to useful fuels by nanostructured composite catalysis

10.20-10.40 Alvin Orbaek White

Swansea University

United Kingdom

Carbon nanotube production and electrical conduction

10.40-11.00 Grace A. Lowe University of Nottingham

United Kingdom

Electrochemistry of Polyoxometalates Confined within Single-Walled Carbon Nanotubes

11.00-11.20 Sweety Sarma University of South Africa

South Africa

Electronic and Magnetic properties of exfoliated Two-dimensional Molybdenum Di-Sulphide

11.20-11.40 Shweta Chaure

COEP- Pune India Self Organized Cadmium Sulphide nanocrystalline schottky diode

11.40-12.00 Tawatchai Charinpanitkul

Chulalongkorn University

Thailand Facile fabrication of WO3/MWCNT hybrid materials for gas sensing application

12.00-12.20 Chandan Dasgupta

IISc Bangalore India Translocation of Bioactive Molecules through Carbon Nanotubes Embedded in a Lipid Membrane

12.20-12.40 Frédéric Dumur

Aix-Marseille Université

France On-surface Synthesis of Aligned Functional Nanoribbons Monitored by Scanning Tunnelling Microscopy and Vibrational Spectroscopy

12.40-13.00 Eleonora Pargoletti

Università degli Milano

Italy Graphene Oxide-Based Hybrids for Chemiresistive VOCs Sensors

13.00-13.15 Akbar Esmaeili

Islamic Azad University

Iran Synthesis of a novel structure for the oral delivery of insulin and the study of its effect on diabetic rats

Page 6: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

6

Session CEM

10 September 2018, Lecture Theatre B

Session Chairs: Akihiko Kudo, Sam Zhang

11.20-11.50 Sam Zhang (Keynote)

Southwest University

China Environmental stability issues of the perovskite photovoltaics

11.50-12.20 Akihiko Kudo (Keynote)

Tokyo University of Science

Japan Photocatalytic and Photoelectrochemical Water Splitting and CO2 Reduction aiming at Artificial Photosynthesis

12.20-12.40 Jianjun Ma Sichuan U. of Science and Engineering

China Mechanism of carbon oxidation in a hybrid direct carbon fuel cell

12.40-13.00 Estelle le Sache

University of Surrey

United Kingdom

Design of an intelligent Ni-based catalyst for the dry reforming of methane

13.00-13.10 Eny Kusrini Universitas Indonesia

Indonesia Acid Leaching of Rare Earths from Indonesian Low Grade Bauxite

Session CEM

11 September 2018, Lecture Theatre B

Session Chairs: Guosheng Shao, Parasuraman Selvam, Rahul Bhosale

10.35-11.05 Guosheng Shao (Keynote)

Zhengzhou University

China A designer approach for cost-effective development of advanced energy materials: applications to Li-ion batteries

11.05-11.35 Parasuraman Selvam (Keynote)

IIT Madras India Ordered Nanoporous Materials for Sustainable Catalysis

11.35-11.55 Bushra Ali Dundalk Institute of Technology

Ireland Ni-crown polyoxometalate entrapped into polypyrrole as electrochemical sensor for bromate

11.55-12.15 Rahul Bhosale

Qatar University

Qatar Solar Thermocatalytic Splitting of H2O/CO2 Using NixCo1-xFe2O4 Nanoparticles

12.15-12.35 Cameron-Alexander Price

University of Surrey

United Kingdom

The Successful Application of Nickel/Zinc Oxide Yolk Shell Particles to Prevent Sintering and Coking within the DRM reaction

12.35-12.55 Pascal Nbelayim

Toyohashi University

Japan Effect of Mixing Alkali Metal ions for Proton Conducting Hydrogen SulfatePhosphotungstic acid Composites

Session CEM

12 September 2018, Lecture Theatre B

Session Chairs: Maria A. Goula, Alex Ifeanyi Oje, Carmen M. Rangel

10.00-10.20 Sathish Swaminathan

IIT Madras India Application of feedback control to humidity regulation in PEM fuel cells by mixing dry and humidified gases

10.20-10.40 Maria A. Goula

Western Macedonia University

Greece Renewable (green) diesel production over Ni based on bare and modified alumina catalysts

10.40-11.00 Alex Ifeanyi Oje

University of the West of Scotland

United Kingdom

Silver thin film electrodes for supercapacitor application

Page 7: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

7

11.00-11.20 Nothando C. Shiba

University of South Africa

South Africa

The effect of reducing agents on cobalt-based catalysts for Fischer Tropsch synthesis

11.20-11.40 Somnath C Roy

IIT Madras India Reduced Graphene Oxide-Titanium Oxide Nanocomposites for Photocatalytic CO2 Reductio

11.40-12.00 Shankar S. Kekade

Pune University India The structural phase transition study of BiVO4

12.00-12.20 Olaia Á. Bermúdez

Max Planck Institute

Germany Proline-based polymer/magnetite nanoparticles for asymmetric catalysis

12.20-12.50 Luiz Pereira (Keynote)

University of Aveiro Portugal Organic Solar Cells morphology and related electrical transport: critical post thermal effects

Session CPM

11 September 2018, Lecture Theatre B

Session Chairs: Arun K. Nandi, Alan L. Chaffee

14.00-14.20 Yali Yao University of South Africa

South Africa

Gasification Char as a Potential Substitute of Activated Carbon in Adsorptive Desulphurization of Diesel Fuel

14.20-14.40 Alan L. Chaffee

Monash University

Australia High Dispersion Catalysts for CO2 Conversion from MOF Precursors

14.40-15.00 Kwong-Yu Chan

The University of Hong Kong

Hongkong Scalable Synthesis of Porous Metal Oxides for Energy Applications

15.00-15.20 Nipun Sharma

Univ Lyon France A low-temperature synthesis of crystallized TiO2 mesoporous thin films and application to laser-induced printing

15.20-15.40 Arun K. Nandi

Indian Asso. for the Cultivation of Science

India Modulating Band Positions of Interfacially Engineered Perovskite Solar Cell using Copolymer Hole Transporting Material for Higher Power Conversion Efficiency

15.40-16.00 Dietmar Leinen

University of Malaga

Spain Solar thermal Ag-ZrO2 cermet coatings sprayed onto aluminized steel sheet

Session HE

11 September 2018, Lecture Theatre D

Session Chairs: Gao Yun, Ching-Yuan Ho, Ivan Cabria

14.00-14.20 Gao Yun (Invited)

Hubei University

China Sub-nanometer transition metal clusters anchored on TiO2 nano-sheets for high efficiency H2 Evolution

14.20-14.40 Manmeet Kaur

University of Glasgow

United Kingdom

Nickel-Zirconium Bimetallic Alloy Catalyst Nanoparticles decorated on graphitic carbon nitride for hydrogen storage performance

14.40-15.00 Ivi M. de Carvalho

University of Bath

United Kingdom

Advanced H2 – CO2 Pd and Pd/Alloy Composite Membrane Separations and Process Intensification

15.00-15.20 Wei Jin University of Surrey

United Kingdom

Liquid phase in-situ hydrodeoxygenation of guaiacol over CeO2 supported Ni-based nanocatalysts: understanding the promoting effect of molybdenum

15.20-15.40 Gustavo Andreasen

INIFTA Argentina Low equilibrium pressure metal hydride for hydrogen storage in renewable energy systems

15.40-16.00 Ivan Cabria

Universidad de Valladolid

Spain Volumetric and Gravimetric Hydrogen Storage Capacities of Nanoporous Carbons obtained using DFT-based methods that include Dispersion Interactions

Page 8: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

8

16.00-16.20 Ching-Yuan Ho

Chung Yuan Christian University

Taiwan Investigation of the synergistic effect on hydrolytic sodium borohydride mixed with waste Al for hydrogen generation

Session HE

12 September 2018, Lecture Theatre D

Session Chairs: Xin Zhang, Rongheng Lin, Balaji Rengarajan

14.00-14.20 Rongheng Lin Institute of Networking Technology

China The Application of Hydrogen and Photovoltaic for Reactive Power Optimization

14.20-14.40 Suseendiran Ravichandran

IIT Madras India Factors Influencing the Performance of Cylindrical PEM Fuel Cell

14.40-15.00 Maria A. Goula Western Macedonia University of Applied Sciences

Greece Hydrogen production via the glycerol steam reforming reaction over Ni/Αl2O3 and Ni/Attapulgite catalysts

15.00-15.20 S.Dunn University of Bath

United Kingdom

Pyroelectric water splitting: Applications and materials

15.20-15.40 Ivan Cabria Universidad de Valladolid

Spain A Theory to design Nanoporous Materials with given Hydrogen Storage Capacities

15.40-16.00 Balaji Rengarajan IIT Madras India Hydrogen Production by Electrochemical Methanol Reformation using Alkaline Anion exchange Membrane based cell

16.00-16.20 Nisha Kodan IIT-Delhi India Efficient Photoelectrochemical Water Splitting in Band Edge Engineered Metal Oxide Heterostructure Photoanode for Solar Hydrogen Production

16.20-16.40 Rahul Bhosale Qatar University

Qatar Solar H2 Production via Zn-ferrite Based Thermochemical H2O Splitting Cycle

Session PEM

10 September 2018, Lecture Theatre E

Session Chairs: S. Ananda Kumar, Corine Bas, Daniel Herranz

14.00-14.20 S. Ananda Kumar

Anna University India Development and Characterization of Novel Phenolic Resin

14.20-14.40 Daniel Herranz

University Autónoma of Madrid

Spain High performance fuel cells with radiated ETFE membranes and ionomers grafted with VBC and quaternized with aliphatic heterocyclic amines

14.40-15.00 Bruce S. Hudson

Syracuse University

USA Polyacetylene – toward the first synthesis of the genuine material

15.00-15.20 Theresa Schoetz

University of Southampton

United Kingdom

3D Conductive Polymers in Ionic Liquid as Energy Storage Material

15.20-15.40 Corine Bas

University Savoie Mont Blanc

France Localized Chemical degradation of Perfluoro Sulfonic Acid (PFSA) ionomer membrane in Fuel cell

15.40-16.00 Sophie Barrau

Université de Lille

France Piezoelectric properties of PVDF composites based on functionalized BT nanoparticles

Page 9: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

9

Session SEM

11 September 2018, Lecture Theatre E

Session Chairs: Luiz Pereira, Nandu Chaure, Oskar Blaszczyk, Pascal Nbelayim

14.00-14.15 Nandu Chaure (Invited)

Savitribai Phule Pune University

India Superstrate CuInGaSe2 solar cells devices prepared by low-cost wet electrochemical route

14.15-14.30 Pascal Nbelayim

Toyohashi University of Technology

Japan A Panchromatic Absorbing Natural Dye with Potential for High Performance DSSC

14.30-14.45 Oskar Blaszczyk

University of St. Andrews

United Kingdom

Engineered Exciton Diffusion Length Enhances Device Efficiency in Small Molecule Photovoltaics

14.45-15.00 Luís Manuel Fernandes Rebouta

University of Minho

Portugal Multi-layer solar selective absorber coatings based on W/WSiAlNx /WSiAlOyNx/SiAlOx for high temperature applications

15.00-15.15 Mohamad Fariza

Universiti Tun Hussein Onn Malaysia

Malaysia Fabrication of Nanorods-TiO2 for Heterojunction Thin Film Application with Electrodeposit-p-Cu2O Absorbing Layer

15.15-15.30 Nandini Sharma (Invited)

Netaji Subhas Institute of Technology

India Recent developments in Energy Materials for Photocatalysis

15.30-15.45 Abdelali Zaki

CIC energiGune

Spain High-Temperature Thermochemical Energy Storage based on RedOx reactions using Cobalt-Manganese mixed metal oxides

15.45-16.00 Xianyu Deng Harbin Institute of Technology

China Film and Interface Engineering for Efficient Planar Heterojunction Perovskite Solar Cells

16.00-16.15 Iman El Mahallawi

Cairo University

Egypt The Effect of Heat Treatment Parameters on microstructure and Optical Properties of PVD sputtered TiN Thin films

Session SEM

12 September 2018, Lecture Theatre E

Session Chairs: Byeong-Kyu Lee, Shibin Li, Zakir Khan

14.00-14.15 Yong Chan Choi DGIST Republic of Korea

Controlled Growth of Antimony Sulfoiodide Thin Films for Applications to Low-Temperature Chalcohalides Solar Cells

14.15-14.30 Krishna Feron The University of Newcastle

Australia Ternary Organic Solar Cells: Controlling Exciton Migration Using Energy Transfer

14.30-14.45 Shibin Li University of Electronic Science and Technology of China

China Enhanced thermal stability of perovskite film via Ba(OH)2 interfacial engineering for efficient perovskite solar cells without electron transport layer

Page 10: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

10

14.45-15.00 Pavel Dytrych Institute of Chemical Process Fundamentals of the CAS

Czech Republic

Silicon nanowires´ based photoelectrochemical system for efficient hydrogen evolution

15.00-15.15 Xu Qun Zhengzhou University

China Facile Preparation of Porphyrin-MoS2 Nanocomposite for Enhanced Photoelectrochemical Performance

15.15-15.30 Amina Kermad CRTSE Algeria Enhancing anti-reflective and Hydrophobic Properties of Glass Surfaces by Nanostructuration and Grafting of Saturated Carbon Chains

15.30-15.45 Javier Navas University of Cádiz

Spain Towards highly stable nanofluids based on metal sulphide for Concentrating Solar Power

15.45-16.00 Zakir Khan Bournemouth University

United Kingdom

Shell-and-tube based thermal energy system coupled with flat plate solar collector

16.00-16.15 Carina Figueiredo

Universidade NOVA de Lisboa

Portugal New generation of Luminescent Solar Concentrators from photoluminescent inorganic materials

16.15-16.30 Ana Lucia Pinto Universidade NOVA de Lisboa

Portugal New Synthetic Pyranoflavylium salts: a bio-inspired approach for light-harvesting in Dye-Sensitized Solar Cells

16.30-16.45 Byeong-Kyu Lee University of Ulsan

Republic of Korea

W/Mo co-doped BiVO4 as efficient photoanodes for improved photoelectrochemical performance

16.45-17.00 Sanjeev Gupta IIT Madras India Coloured Titania: Promising Photocatalyst for Solar Hydrogen Generation

Poster Presentations

11 September 2018, Great Hall (17.00- 18.00 hours)

Poster Numbers

Name Affilation Country session title

AEM01 Alexandros G. Oikonomou

Lancaster University United Kingdom

AEM Determination of optimum welding parameters for the welding execution of steels used in underwater marine systems (including the submerged parts of Wave Energy Converters)

AEM02 Yerassyl Yerlanuly Al-FarabiKazNU Kazakhstan AEM Synthesis of carbon nanowalls by the PECVD method for creating supercapacitors

AEM03 Souad Abderafi Mohammed V University in Rabat

Morocco AEM Optimal design of off-grid photovoltaic systems for reverse osmosis wastewater treatment

AEM04 Sang Soon Hwang Incheon National University

Republic of Korea

AEM Flat flame synthesis of mixed TiO2- SiO2 nanoparticle

AEM05 Assiya Yermukhambetova

Nazarbayev Unibersity

Kazakhstan AEM Characterization of porous structure of graphite electrode with different packing densities

Page 11: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

11

AEM06 Xiwei Qi Northeastern University at Qinhuangdao

China AEM Synthesis of NiCuZn ferrite nanopowders by sol-gel autocombustion

AEM07 Pavlos Giannakou University of Surrey United Kingdom

AEM Printed Supercapacitors for Energy Harvesting Applications

AEM08 Jun Woo Jeon Incheon National University

Republic of Korea

AEM Pyroprotein-based electronic textiles with high thermal durability for particulate matter filter and energy harvesting materials

AEM09 Zheng-Ming Wang National Institute of Advanced Industrial Science and Technology

Japan AEM P25-Reduced Graphene Oxide Layer-by-Layer Hybrid Films for Efficient Dye Photodegradation

AEM10 João O. Ventura University of Porto Portugal AEM Power-generating footwear based on a Hybrid Nanogenerator

AEM11 Muhammad Ahmad

University of Surrey United Kingdom

AEM Vertically Aligned Silicon Coated Carbon Nanotubes for Use in Li-Ion Cell

AGM01 Junichi Kanasaki Osaka University Japan AGM Optical control of structural transformation to form nano-scaled order phases including sp3-like interlayer bonds in graphite

AGM02 S. Sarma University of South Africa

South Africa

AGM MoS2-GrapheneOxide Composites Materials for Optoelectronics Applications

AGM03 Yung-Hao Tsou National University of Kaohsiung

Taiwan AGM FePc supported by nitrogen-doped graphene aerogel as a catalyst in Li−O2 battery

AGM04 Won Taek Jung Incheon National University

Republic of Korea

AGM Commercial silk-based electronic textiles for gas sensing

ANM01 Krzysztof Lukaszkowicz

Silesian University of Technology

Poland ANM Characteristics of CrAlSiN+MoS2 coating deposited by cathodic arc and PACVD process

ANM02 Wiktor Matysiak Silesian University of Technology

Poland ANM Comparation of optical properties of two types of two-dimension Bi2O3 nanostructures - solid layer and thin fibrous mats otained via spin-coating and electrosinning techniques

ANM03 Tomasz Tański Silesian University of Technology

Poland ANM Structural, compositional, thermal and optical characteristic of one-dimension Bi2O3 + BiO2/TiO2 NPs nanostructures synthesis by electrospinning method

ANM04 Jan Fait The Czech Academy of Sciences

Czech Republic

ANM Diamond Nanocrystals Nucleation Controlled by Amorphous and Microcrystalline Silicon Thin Films

ANM05 Simona Tuckute Lithuanian Energy institute

Lithuania ANM Tailoring of TiO2 film crystal texture for higher photocatalysis efficiency

ANM06 Somnath C Roy IIT Madras India ANM Fabrication and Photoelectrochemical Characteristics of One Dimensional (1D) CuxO (x = 1,2) Nanostructures

ANM07 V. Mikhelashvili Technion Israel ANM Negative Photoconductivity and Non-Volatile Memory Effects in a Metal-

Page 12: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

12

InsulatorSemiconductor Diode with Embedded Co-Co3O4 Nano-particles

ANM08 Ekaterina Fedorovskaya

Novosibirsk State University

Russia ANM Effect of thermal treatment of the reduced graphene oxide on its electrochemical properties

CEM01 Gorakshnath Takalkar

Qatar University Qatar CEM Development of Catalytic La-based Perovskite Redox Materials for Solar Thermochemical Fuel Production

CEM02 Rahul Bhosale Qatar University Qatar CEM Synthesis of Doped Ceria Nano-catalytic Materials Using Co-Precipitation of Hydroxide Method for Solar Thermochemical Conversion of H2O/CO2

CEM03 Anchu Ashok Qatar University Qatar CEM Study the mechanism of ethanol decomposition over bimetallic Cu-Co

CEM04 Vladimir Lomonosov

Semenov Institute of Chemical Physics RAS

Russia CEM NaWMn/SiO2 mixed oxide: a new insight into the nature of the catalytic activity in methane oxidative coupling

CEM05 Md. Abdul Matin Qatar University Qatar CEM PtZn Nanoparticle Electrocatalysts Synthesized by Solution Combustion for Ethanol Oxidation Reaction in an Alkaline Medium

CEM06 Oscar Arturo González Vargas

Instituto Politécnico Nacional

Mexico CEM Effect of Ce3+ and Ce4+ co-doping on the surface acidity of the ordered mesoporous Ce-MCM-41 materials

CEM07 Oscar Arturo González Vargas

Instituto Politécnico Nacional

Mexico CEM FTIR spectroscopic studies of CO adsorption over Rh/Ce-MCM-41 catalysts

CEM08 Cairong Jiang Sichuan University of Science and Engineering

China CEM A symmetric cell with La0.8Sr0.2Co0.2Fe0.8O3 electrode for direct carbon fuel cells

CEM09 Zhenjun Dou Donghua University China CEM Growth of Manganese Dioxide Nanosheet Arrays on the Surface of Activated Carbon Cloth as High–performance Electrode Materials for Supercapacitor

CEM10 Maria A. Goula Western Macedonia University of Applied Sciences

Greece CEM Innovative valorization of biogas for the production of renewable ethylene via oxidative coupling of CH4 and CO2 hydrogenation

CPM01 Chandrababu Putta

IIT Madras India CPM Selective Hydrogenation of Cinnamaldehyde over Pd/TiO2 Catalysts

CPM02 Zheng-Ming Wang National Institute of Advanced Industrial Science and Technology

Japan CPM Cellulose Nanofiber-Mediated Synthesis of Silicalite-Type Molecular Sieve Nanostructure

HE01 Rahul Bhosale Qatar University Qatar HE Thermodynamic Efficiency Analysis of CaSO4/CaO based Thermochemical H2O Splitting Solar Thermochemical Cycle

HE02 Rahul Bhosale Qatar University Qatar HE A Two-Step Solar Thermochemical Chromium Oxide Based CH4 Reforming and H2O Splitting Cycle

Page 13: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

13

HE03 K. Huang Beijing Jiaotong University

China HE Effects of Turbulence on Cellular Instabilities of H2/CH4/Air Premixed Flames

HE04 Jesna Ashraf Qatar University Qatar HE Thermodynamic investigation of butanol steam reforming in presence of hydrazine for hydrogen production and carbon removal

HE05 Dana Stanescu Synchrotron SOLEIL France HE Ti-doped hematite nanorods as photoanodes for solar water splitting

HE06 Yusong Yu Beijing Jiaotong University

China HE Experimental study on effects of ethanol-diesel fuel blended on spray characteristics under ultra-high injection pressure up to 350 MPa

HE07 Yerassyl Yerlanuly Al-FarabiKazNU Kazakhstan HE Synthesis of fullerenes for hydrogen storage

HE08 Yusong Yu Beijing Jiaotong University

China HE Numerical study on the effect of varying H2 concentration on the combustion and exhaust emissions in a heavy duty diesel engine

HE09 Katarina Lima Polytechnic School - UPE

Brazil HE Dynamic Analysis of the Solar Bi-Reforming of Methane for the Production of Hydrogen in a Fixed-Bed Solar Thermochemical Membrane Reactor

HE10 Budan Wu Beijing University of Posts and Telecommunications

China HE Hydrogen Fuel Cell Diagnostics using Kernel SVM and Enhanced Feature Selection

HE11 T.V.R. Mohan IIT Madras India HE Experimental and Modelling Assessments of Hydrogen in Hexagonal Ordered Mesoporous Carbons

HE12 Hyun-Seok Jang Incheon National University

Republic of Korea

HE Hydrogen Storage using Phyllostachys bambusoides-based Porous Green Carbon

HE13 Salah Tamalouzt University A/Mira of Bejaia

Algeria HE Performance analysis of wind turbine generator for microgrid using hydrogen and hybrid energy storage systems

HE14 Ying Tian Beijing Jiaotong University

China HE A Calculation Model of Hydrogen Consumption of Fuel Cell Vehicles with the Temperature Pressure method

HE15 Ying Tian Beijing Jiaotong University

China HE Research of hydrogen consumption detection flowmeter method for fuel cell vehicles

PEM01 Daru Seto Bagus Anugrah

Pukyong National University

Republic of Korea

PEM Synthesis and Characterization of Poly(styrene-alt-maleic anhydride) Based Injectable Hydrogels via Tetrazine-Norbornene Chemistry for Controlled Drug Delivery

PEM02 Akihiro Hiroki QST Japan PEM Properties of Anion-conducting Electrolyte Membranes Based on ETFE Membrane and Crosslinked Graft Polymers for Fuel Cells

Page 14: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

14

PEM03 Jan Prokes Charles University Czech Republic

PEM Charge Transport in Conducting Polymer-Based Cryogels

PEM04 Kimio Yoshimura QST Japan PEM The Relationship between Membrane Properties and Hierarchical Structure of Radiation Grafted Anion Conducting Membranes

PEM05 Carmen M. Rangel Laboratrio Nacional de Energia e Geologia

Portugal PEM Proton conductivity of Nafion-azolebisphosphonates membranes for PEM fuel cells

PEM06 Sophie Barrau Université de Lille France PEM Thermoelectric properties of PVDF/MWCNT composites

PEM07 Maroua Louati University of Lille France PEM Photoinduced microscopic changes based on supramolecular assembly of functionalized diarylethene

SEM01 Dong In Kim Sungkyunkwan University

Republic of Korea

SEM Al-doped TiO2 as electron transport layer to enhanced performance for Perovskite solar cell

SEM02 Kenji Harafuji Ritsumeikan University

Japan SEM Durability Improvement of Organic Solar Cells with Ultra-thin Ag/Au Layers

SEM03 Kiseok Jeon Korea Institute of Industrial Technology

Republic of Korea

SEM Study of interlayer for carrier-selective contacts Si solar cell with copper iodide hole-selective layer

SEM04 Atsushi Suzuki The University of Shiga Prefecture

Japan SEM First-principles calculation study of electronic structures of alkali metals (Na, K, Li and Rb)-incorporated formamidinium lead halide perovskite compounds

SEM05 Atsushi Suzuki The University of Shiga Prefecture

Japan SEM Fabrication and characterization of perovskite type solar cells using the phthalocyanine as hole-transporting material

SEM06 Sung-Min Youn KITECH Republic of Korea

SEM Defect characteristics of CIGS thin film solar cells in flexible stainless steel with diffusion barrier

SEM07 Bohuslav Rezek Czech Technical University

Czech Republic

SEM Photoelectron emission from diamond enhanced by pyrrole treatment

SEM08 Young Joon Cho Chungnam National University

Republic of Korea

SEM The change of atomic layer deposited (ALD) Al2O3 passivation characteristics by ozone concentration

SEM09 Young Joon Cho Chungnam National University

Republic of Korea

SEM The study of passivation and carrier transporting characteristics for atomic layer deposited (ALD) TiO2 after anneaning

SEM10 Yasir Altowairqi Durham University United Kingdom

SEM The effect of annealing conditions: temperature, time, ramping rate and atmosphere in CZTS thin film solar cells fabrication

SEM11 Marta G. S. Sousa University of Aveiro Portugal SEM Optimization Low Temperature RF-magnetron Sputtering of Indium Tin Oxide Films for Solar Cell Applications

Page 15: AEM2018 (Advanced Energy Materials) · advanced energy materials: applications to Li-ion batteries 11.05-11.35 Parasuraman Selvam (Keynote) IIT Madras India Ordered Nanoporous Materials

15

SEM12 Tugba Haciefendioglu

Middle East Technical University

Turkey SEM Design of PbTe Quantum Dot Surface Passivation Protocols: Aiming to Increase Stability and Efficiency of Photovoltaic Devices

SEM13 Dong In Kim Sungkyunkwan University

Republic of Korea

SEM Hemisphere TiO2 as electron-transport scaffolds in Perovskite solar cell

SEM14 Silva Reis University of Aveiro Portugal SEM On the physical nature underlying post-thermal annealing of P3HT:PCBM bulkheterojunction solar cells: effects on the electric charges transport


Recommended