Date post: | 28-Dec-2015 |
Category: |
Documents |
Upload: | geovanny-shaggy-quesada |
View: | 437 times |
Download: | 17 times |
Connecting Rod Manual
April 2006
Compiled & edited By
Mike Caruso, Steve Fox, Dave Hagen, Yolanda Carranza & Scott Groves
Copyright AERA 2006
Printed in U.S.A.
AERA - Engine Builders Association 330 Lexington Drive
Buffalo Grove, IL 60089-6998
Tech Support - (888) 324-2372 (847) 541-6550
FAX (857) 541-5808
http://www.aera.org
Note: Do not attempt to use solely as an interchange manual.
This manual contains all information from previous editions and was compiled from the best available sources, and has been edited with the utmost care. Neither the Association nor its staff can assume any responsibility for the accuracy of this data or the consequences of its application.
2
3
Table of Contents
Note: Do not attempt to use as an interchange manual. Section 1. The Connecting Rod Manual Table of Contents 3 Introduction 4 Preliminary Checks 4 Machinists Shop Data 4 - 5 Engine and/or Equipment Specifications 6 Quick Cubic Inch Displacement & Compression 7 Abbreviations & Symbol Marks 8 Modo de Empleo en Espaol 9 - 11 Clculo Rpido del Desplazamiento 12 Abreviaturas y Smbolos 13 Index 14 - 15 Section 2. Specifications by Manufacturers 17 452 Section 3. Connecting Rod Applications by Casting Number 453 - 539
4
Introduction AERA gratefully acknowledges the excellent cooperation and feedback provided by all Past, Active and Associate members who were called upon for assistance in the creation of this manual. This manual is created from latest information contained and maintained in PRO-SIS AERAs Engine Specification Software program. All information contained in the manual is available on a CD-ROM for use in your shop. PRO-SIS also links these specifications with applicable AERA Technical Bulletins for easy review of the latest product updates and revisions. The word PRO-SIS stands for Professional Specification Information Software. PRO-SIS Engine Specifications is a trademark of AERA.
Preliminary Connecting Rod Checks Assuming that the connecting rod is otherwise serviceable, the complete rod should be checked for cracks or flaws through magnetic particle inspection. Furthermore, the connecting rod should be checked for twist and bend. All bolt spot faces should be flat and without visible fretting. The connecting rod bolt and/or nut should be checked for elongation and worn or stripped threads. Torque-to-yield and other fasteners should be replaced in accordance with original manufacturer recommendations. During printing of this manual, AERA listed all known bolts that require replacement, however, OEM manufacturers make changes to bolts often. If you have a question please call the Techline, because we have the latest information from the OEM manufacturers and we update our PROSIS engine specification program daily. Necessary corrections should be made before processing and machining to minimize the danger of costly engine repair, lost machine time and disruption of shop work schedules.
Machinists Shop Data Identifying a Connecting Rod - When the accurate identity of a component is not known it is best to first attempt to locate an identifying number or mark. It is suggested to identify rods before cleaning in an oven because you might bake off any ink or paint makings. A forging number is usually stamped or cast into the connecting rod. All available numbers known to AERA have been listed in this manual. Certain connecting rods do not carry a forging number. Identification may be possible from insignias, paint marks or other markings located on the connecting rod. Reference the comments in the Alphabetical Listing by Manufacturer section of this manual for these marks. Locating Specifications by Casting Number - Find the casting number in the numerical list of casting numbers. The corresponding engine manufacturer, displacement(s), and specifications are detailed in the alphabetical listing section. An asterisk (*) following the engines displacement suggests that additional information about the connecting rod can be found in the alphabetical listing comment section.
5
Locating Specifications by Manufacturer - Each engine make is listed by number of cylinders in the alphabetical listing section (i.e., four cylinder, six cylinder, eight cylinder, etc.). Displacement is listed in liters from smallest to largest. Some heavy-duty engines are listed by model number in place of liter displacement for easier reference. Note that extensive use of VIN codes has been made to insure that the proper specifications are listed. Multiple VIN listings: Vehicle manufacturers use the same VIN designation character for different engines, (i. e. GM uses 1.6L VIN 6) these engines that are manufactured by four different engine companies, Daewoo, Isuzu, Suzuki & Toyota. Others such as the Ford 5.0L VIN F have seven different records according to years used. Those different records are necessary as engine specifications or castings changed significantly enough to warrant a different record. All available connecting rod specification and application data are shown to the right and below the displacement specification. All dimensions are expressed in inches unless otherwise noted.
Note: Do not attempt to use as an interchange manual.
6
Engine And/Or Equipment Specifications
Manufacturer - Listed in alphabetical order. Since many vehicle manufacturers will offer engines of other than their own manufacture, it may be necessary to refer to another section in the manual. Saturn (i.e., see GM, Lincoln, Mercury - see; Ford, AMC, Rambler, Jeep/Eagle - see Chrysler, - International, see Navistar). Liter - The engine's displacement in liters. This information is generally supplied by the engine manufacturer. Model - Heavy duty and industrial engines, such as Caterpillar, are listed by their engine model number rather than Liter displacement. One notable exception is Cummins, where engine model numbers have been replaced by their Liter displacement. VIN/Code - Either the original equipment manufacturer's VIN (Vehicle Identification Number), or a commonly used Code to delineate between engines of like displacement, is listed in this column. Year Produced and/or Used - this data is applicable when the column shows the production year, or years, when the engine is or was made and/or used by the manufacturer. The year(s) data is also used to indicate variations in model years when an engine is, or was, used in differently named vehicles and/or equipment. Cntr-to-Cntr - The center-to-center distance is the length of the connecting rod when measured from the center of the big end bore to the center of the small end bore. Assembly Orientation - The assembly orientation of the piston and connecting rod. Big End Bore - The diameter of the lower or big end bore of the connecting rod. Bolt Dia. - The diameter of the big end bolts. Small End Bore - The diameter of the top or small end of the connecting rod. If a wrist pin bushing is fitted, this will be the inside diameter of the finished bushing. Bore w/Bushing - When a connecting rod is fitted with a wrist pin bushing, this is the diameter of the parent bore. Wrist Pin Dia. - The outside diameter of the wrist pin. Lock/Float - The type of retaining mechanism that is used to maintain the position of the wrist pin. Locked usually refers to the use of a locking ring. Torque - The specified amount of torque for the big end bolts Casting # - The casting numbers found on this connecting rod. Comments - The last line of each listing may contain additional information about this particular engine.
7
Quick Cubic Inch Displacement
.7854 X bore diameter X bore diameter X crankshaft stroke = cubic inches of one cylinder.
.7854 X 4.00 = 3.1416 X 4.00 = 12.57 X 3.484 = 43.79 cubic inches of one cylinder.
One cylinder containing 43.79 cubic inches X number of cylinders 8 = 350.32
Quick Check Engine Compression Ratios
The calculation of an engine's compression ratio (C.R.) is based on the formula:
SV + CV CR = --------------
CV S.V. = Swept Volume for one cylinder in ccs. = Bore X Bore X Stroke X 12.9 C.V. = Clearance Volume for one cylinder in ccs. = H.V. minus E.D.V. plus D.V. plus G.V. H.V. = Head Volume (published or measured in ccs) = Best if measured because head volume varies. E.D.V. = Effective Dome Volume (published or measured in ccs) = Dome Volume minus valve relief and/or dish volume D.V. = Deck Volume clearance (piston to deck) in ccs = Bore X Bore X deck height X 12.9 G.V. = Gasket Volume in ccs = Gasket bore X gasket bore X compressed thickness X 12.9 or enter known gasket volume.
All compression volume measurements are in cubic centimeters. (ccs)
8
Abbreviations & Symbols
AIR air injection/thermactor ports BC barrel carburetor BS balance shaft CC cubic centimeters CFI central fuel injection Cyl. cylinder DEFI dual electronic fuel injection DIA diameter DOHC dual overhead camshaft E external EFI electronic fuel injection EX except EXH exhaust valve FWD front wheel drive HD heavy-duty HP horsepower HYD hydraulic I internal INT intake valve IVSH installed valve stem height LP liquid propane MFI multi-port fuel injection N/ none or not NA not available OHC overhead camshaft OHV overhead valve RWD rear wheel drive SOHC single overhead camshaft TBI throttle body injection VIN vehicle identification number VLV valve V/PRO valve protrusion V/REC valve recession W/ with W/O without
9
Manual de Bielas
Introduccin
AERA reconoce y agradece el excelente apoyo de todos los miembros Activos y Asociados cuya colaboracin se solicit para la elaboracin de este manual. El manual fue preparado con la informacin mas reciente contenida y mantenida en los Programas (Software) de Especificaciones de Motores PRO-SIS de AERA. Toda la informacin contenida en el manual est disponible en un Disco Compacto (CD-ROM) para el uso en su taller. PRO-SIS asimismo vincula estas especificaciones con los Boletines Tcnicos de AERA para as contar con una revisin sencilla de las actualizaciones y modificaciones de los productos y partes mas recientes. La palabra PROSIS significa Professional Specification Information Software. PROSIS Especificaciones de Motores es una marca de AERA.
Revisiones Preliminares de Bielas Asumiendo que la biela puede estar sujeta a reparacin, la biela completa deber ser verificada con el objeto de comprobar si existen fracturas, a travs de una inspeccin magntica de partculas. Adicionalmente, la biela deber ser verificada para el caso de que existan torceduras o que pudiere estar doblada. Todas las caras lisas debern estar planas y sin desgaste visible. El tornillo y la tuerca de la biela debern verificarse para detectar un posible alargamiento y desgaste en las cuerdas. La fuerza de torsin y los sujetadores debern sustituirse de acuerdo con las recomendaciones del fabricante original. Durante la impresin de este manual, AERA enumer todos los tornillos conocidos que requieren reemplazo, sin embargo, la Fabricante de Equipo Original a menudo realiza cambios a los tornillos. Si usted tiene alguna pregunta llame a nuestra lnea tcnica, nosotros tenemos la informacin mas reciente del Fabricante de Equipo Original y actualizamos el programa de PROSIS diariamente. Debern hacerse las correcciones necesarias antes de procesar y rectificar con objeto de minimizar el riesgo de una reparacin costosa al motor, perdida de tiempo de rectificacin e interrupcin de los horarios de trabajo.
10
Informacin para Talleres de Rectificado
Identificacin de Biela Cuando la identidad exacta de un determinado componente no se conozca, lo mejor es intentar primero ubicar un nmero o marca de identificacin. Se sugiere que identifique las bielas antes de limpiarlas, ya que algunas marcas pintadas pueden borrarse con este proceso. Por lo general aparece un nmero forjado o estampado en la biela. Todos los nmeros de fundicin disponibles conocidos por AERA han quedado listados en este manual. Ciertas bielas no llevan un nmero forjado. En estos casos, su identificacin puede hacerse mediante insignias, marcas pintadas u otros distintivos contenidos en la propia biela. Refirase a los comentarios en la seccin de la Lista Alfabtica por Fabricante de este manual en relacin con dicha identificacin. Localizacin de Especificaciones por Nmero de Fundicin Localice el nmero de identificacin en la lista numrica de nmeros de fundicin. El fabricante de motores, el desplazamiento y las especificaciones correspondientes se detallan en la seccin de Lista Alfabtica. Si aparece un asterisco (*) despus del desplazamiento del motor, esto indica que la informacin adicional sobre la biela puede localizarse en la seccin de comentarios de la lista alfabtica. Localizacin de Especificaciones por Fabricante Cada clase de motor se lista por nmero de cilindros en la seccin de lista alfabtica (p. ej., cuatro cilindros, seis cilindros, ocho cilindros, etc.). Su desplazamiento se indica en litros de menor a mayor. Algunos motores de trabajo pesado se incluyen por nmero de modelo en lugar de desplazamiento por litros; esto es para efectos de referencia. Ntese que el uso extenso de los cdigos VIN (Nmero de Identificacin de Vehculo) se ha hecho con el objeto de asegurar que las especificaciones apropiadas se encuentran listadas. Listados Mltiples de VIN: En algunos casos los fabricantes de vehculos usan la misma carta de designacin de VIN para los diversos motores, es decir los motores de GM 1.6L VIN 6 son fabricados por cuatro diversas compaas, Daewoo, Isuzu, Suzuki y Toyota. En otros casos como la Ford 5.0L VIN F tiene siete diversos registros segn los aos usados. Esos diversos registros son necesarios pues las especificaciones o las forjas del motor cambiaron perceptiblemente lo suficiente para hacer necesario un expediente diferente. Toda la informacin sobre bielas que se tiene disponible y la informacin sobre su aplicacin, se muestra a la derecha y en la parte inferior de la especificacin de desplazamiento. Todas las dimensiones se expresan en pulgadas a menos que se indique otra cosa.
Nota: No intente utilizar como manual de intercambio.
11
Especificaciones de Motores y/o Equipo
Fabricante Listados en Orden Alfabtico En virtud de que muchos fabricantes de vehculos ofrecern motores diversos a los de su propia manufactura, ser necesario referirse a otra seccin en el manual. Saturn (ver GM, Lincoln, Mercury ver Ford, AMC, Rambler, Jeep/Eagle ver Chrysler). Litro El Desplazamiento del Motor en Litros. Esta informacin por lo general es proporcionada por el fabricante del motor. Modelo Los motores de trabajo pesado e industriales, tales como Caterpillar, se mencionan por su nmero del modelo de motor y no por el desplazamiento en Litros. Una excepcin notable es Cummins, en donde los nmeros de modelo se han sustituido por su desplazamiento en litros. VIN-Cdigo En esta columna se seala el Nmero de Identificacin de Vehculo (VIN) del fabricante del equipo original o un cdigo comnmente usado para efectos de delinear entre motores de igual desplazamiento. Ao de Produccin y/o Uso Cuando esta informacin es aplicable, esta columna muestra el ao de produccin, o bien el nmero de aos cuando el motor haya sido hecho y/o usado por el fabricante. La informacin sobre el ao(s) asimismo se utiliza para poder indicar las variaciones en los aos del modelo cuando un motor este siendo o haya sido usado en vehculos y/o equipo de diferente denominacin. Centro a Centro La distancia de centro a centro es la longitud de la biela cuando se mide a partir del centro del dimetro mayor (alojamiento del cojinete) al centro del dimetro menor (alojamiento del perno). Ensamble La orientacin sobre el ensamble del pistn y la biela. Dimetro Mayor (alojamiento del cojinete) El dimetro mayor de la biela o de la parte inferior. Dimetro de los Tornillos Dimetro de los tornillos de la biela. Dimetro Menor (alojamiento del perno) El dimetro menor o alojamiento del perno. Si es un perno que utiliza buje, este ser el dimetro interior del buje ya rectificado. Dimetro Interior con Buje Cuando una biela es ajustada con un buje en el perno del pistn, este ser el dimetro principal. Dimetro del Perno de Pistn El dimetro externo del perno de pistn. Con Seguro / Flotante El tipo de mecanismo de retencin que se utiliza para mantener la posicin del perno del pistn. Seguro por lo general se refiere al uso de arillos para asegurar el perno en el pistn. Torque La cantidad determinada de fuerza con llave de torsin para los tornillos finales mayores. No. de Fundicin Los nmeros de fundicin localizados en la biela. Comentarios Es posible que la lista pueda contener informacin adicional sobre este motor en particular.
12
CLCULO RPIDO DEL DESPLAZAMIENTO EN PULGADAS CBICAS .7854 X dimetro del cilindro X dimetro del cilindro X carrera del cigeal = pulgadas cbicas
de un cilindro.
.7854 X 4.00 = 3.1416 X 4.00 = 12.57 X 3.484 = 43.79 pulgadas cbicas de un cilindro.
Un cilindro con 43.79 pulgadas cbicas X el nmero de cilindros 8 = 350.32
CLCULO RPIDO DE LA RELACIN DE COMPRESIN
El Clculo de la relacin de compresin de un motor se basa en la frmula:
SV + CV CR = --------------
CV S.V. = Volumen de Barrido (cilindrada para un cilindro en c.c. ). = Dimetro X Dimetro X Carrera X 12.9 C.V. = Volumen de la Distancia Libre del cilindro en c.c. = H.V. menos E.D.V. mas D.V. mas G.V. H.V. = Volumen de la Cabeza (publicado o medido en c.c.) = Es mejor medir, porque varia el volumen de la cabeza. E.D.V. = Volumen Efectivo del Domo (publicado o medido en c.c.) = Volumen del Domo menos el relieve de la vlvula y/o el volumen del Plato. D.V . = Volumen del (Techo) Tope, (espacio del pistn al tope en c.c) = Dimetro X Dimetro X Altura del Techo X 12.9 G.V. = Volumen de la Junta (Empaque) en c.c. = Dimetro de la junta X Dimetro de la Junta X el Espesor Comprimido X 12.9 o introducir el volumen conocido de la junta. Todas las medidas de volumen de compresin son en centmetros
cbicos. (c.c.)
13
Abbreviations & Symbols Smbolos y Abreviaciones
AIR Air Injection/Thermactor Parts / Inyeccin de Aire / Entrada del Termactor BC Barrel Carburetor / Garganta del Carburador BS Balance Shaft / Arbol Balanceador CC Cubic Centimeters / Centmetros Cbicos CFI Central Fuel Injection / Inyeccin de Combustible Central Cyl Cylinder / Cilindro DEFI Dual Electronic Fuel Injection / Doble Inyeccin Electrnica de Combustible DIA Diameter / Dimetro DOHC Dual Overhead Camshaft / Doble Arbol de Levas en la Cabeza E External EFI Electronic Fuel Injection / Inyeccin Electrnica de Combustible EX Except / Excepto EXH Exhaust Valve / Vlvula de Escape FWD Front Wheel Drive / Traccin Delantera HD Heavy-Duty / Servicio Pesado HP Horsepower / Caballos de Fuerza HYD Hydraulic / Hidrulico I Internal INT Intake Valve / Vlvula de Admisin IVSH Installed Valve Stem Height / Altura del Vstago con la Vlvula Instalada LP Liquid Propane / Propano Liquido MFI Multi-Port Fuel Injection / Inyeccin Mltiple de Combustible N/ None or Not / Ninguno o No N/A Not Available / No Disponible OHC Overhead Camshaft / Arbol de Levas en la Cabeza OHV Overhead Valve / Vlvulas en la Cabeza RWD Rear Wheel Drive / Traccin Trasera SOHC Single Overhead Camshaft / Un Arbol en la Cabeza TBI Throttle Body Injection / Acelerador de Inyeccin de Combustible VIN Vehicle Identification Number / Nmero de Identificacin Vehicular VLV Valve V/PRO Valve Protrusion / Protuberancia de la Vlvula V/REC Valve Recession / Recesin de la Vlvula W/ With / Con W/O Without / Sin
14
Index Acura .................................................................................................................... 17-18 Alfa Romeo .......................................................................................................... 18-19 Allis Chalmers ...................................................................................................... 19-26 Audi .................................................................................................................... 26-28 Austin .........................................................................................................................29 Bedford .......................................................................................................................30 BMW ..................................................................................................................... 30-32 Buda ..................................................................................................................... 32-35 Case ..................................................................................................................... 35-43 Caterpillar ............................................................................................................. 44-63 Checker ......................................................................................................................64 Chris-Craft In-Line ......................................................................................................64 Chrysler ................................................................................................................ 64-99 Continental ......................................................................................................... 99-108 Crosley .....................................................................................................................108 Cummins .......................................................................................................... 108-117 Cushman ..................................................................................................................117 Daewoo ............................................................................................................ 117-118 Daihatsu ...................................................................................................................118 DDC .................................................................................................................. 118-127 Deutz ................................................................................................................ 127-132 Ferguson ..................................................................................................................132 Ferrari .......................................................................................................................133 FIAT .................................................................................................................. 133-135 Ford .................................................................................................................. 135-174 GM .................................................................................................................... 175-225 Hanomag ..................................................................................................................225 Harley Davidson ............................................................................................... 225-226 Hatz .................................................................................................................. 226-227 Henry ........................................................................................................................227 Hercules ........................................................................................................... 227-236 Hillman .....................................................................................................................236 Hino .................................................................................................................. 236-237 Honda ............................................................................................................... 237-245 Hudson ............................................................................................................. 245-246 Hyundai ............................................................................................................ 246-247 Infiniti ........................................................................................................................248 Isuzu ................................................................................................................. 248-257 Iveco ................................................................................................................. 257-259 Jaguar .............................................................................................................. 259-260 Jeep .................................................................................................................. 260-261 John Deere ....................................................................................................... 261-278 Kaiser .......................................................................................................................278 Kawasaki ..................................................................................................................278 KIA .................................................................................................................... 278-279 Kohler ............................................................................................................... 279-284 Komatsu ........................................................................................................... 284-288 Kubota .............................................................................................................. 288-295 Leroi .........................................................................................................................295 Lexus ................................................................................................................ 295-296 Leyland .....................................................................................................................296 Liebherr ............................................................................................................ 296-297 Lister ................................................................................................................. 297-300 Lombardini ....................................................................................................... 300-302
15
Long .........................................................................................................................302 Mack ................................................................................................................. 302-305 Maserati ...................................................................................................................305 Massey Ferguson ............................................................................................. 305-307 Mazda ............................................................................................................... 307-312 Mercedes Benz ................................................................................................ 312-317 Mercruiser ........................................................................................................ 317-320 MG .................................................................................................................... 320-321 Military STD ...................................................................................................... 321-322 Mini............................................................................................................................322 Minn Moline ...................................................................................................... 322-324 Mitsubishi ......................................................................................................... 324-335 Murphy ............................................................................................................. 335-336 MWM ................................................................................................................ 336-337 Navistar ............................................................................................................ 337-354 Nissan .............................................................................................................. 354-365 Oliver ................................................................................................................ 365-367 OMC .........................................................................................................................367 Onan ................................................................................................................. 367-372 Opel ..........................................................................................................................372 Packard ............................................................................................................ 372-373 Perkins ............................................................................................................. 373-383 Peugeot ............................................................................................................ 383-384 Porsche ............................................................................................................ 384-388 Renault ............................................................................................................. 388-389 Reo ................................................................................................................... 389-392 Rolls Royce ..............................................................................................................392 Rover ................................................................................................................ 392-393 Saab ................................................................................................................. 393-394 Same ........................................................................................................................395 Satoh ........................................................................................................................396 Scania ......................................................................................................................396 Shibaura ...................................................................................................................397 Slanzi ........................................................................................................................397 Sterling .....................................................................................................................397 Studebaker ....................................................................................................... 397-399 Subaru .............................................................................................................. 399-401 Superior ....................................................................................................................401 Suzuki ............................................................................................................... 401-403 Tecumseh ........................................................................................................ 403-404 Toyota .............................................................................................................. 404-413 Triumph ............................................................................................................ 413-414 Universal .......................................................................................................... 414-416 Volkswagen ...................................................................................................... 416-422 Volvo ................................................................................................................ 422-428 Waukesha ........................................................................................................ 428-440 White ................................................................................................................ 440-442 Wisconsin ......................................................................................................... 442-447 Yanmar ............................................................................................................. 447-452 Zetor .........................................................................................................................452
16
NOTES ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
4ACURA Cylinders
ACURA 1.6 97 D16A1 INTEGRA 86-89 D16A1
1.8899-1.8906" (48.003-48.021 MM) 23 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.415" (137.541 MM)
Pin Type: LOCK
Finish Bushing I.D.: .7462-.7470" (18.953-18.974 MM) *
Pin Diameter: .7478-.7480" (18.994-18.999 MM)
Notes: *.0006-.0016" INTERFERENCE, ROD TOTAL WEIGHT 490G
Comments: DOHC, MPI
ACURA 1.7 104 B17A1 INTEGRA 92-93 B17A1
1.8898-1.8906" (48.001-48.021 MM) 14,23 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.394" (137.000 MM)
Pin Type: LOCK
Finish Bushing I.D.: .8255-.8260" (20.968-20.98 MM)
Pin Diameter: .8265-.8268" (20.993-21.001 MM)
Comments: DOHC, MPI, 1678 CC, 160 HP, ALSO VIGOR
ACURA 1.8 110 B18B1 INTEGRA 94-01 B18B1
1.8900-1.8907" (48.006-48.024 MM) 15,24 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.394" (137.007 MM)
Finish Bushing I.D.: Piston to Rod: CONNECTING ROD OIL HOLE TO.8255-.8260" * (20.968-20.98 MM)
Pin Diameter: .8265-.8268" (20.993-21.001 MM)
Notes: * .0005-.0013 ROD FIT
Comments: DOHC, SFI, USES TIGHTER INTAKE LASH
ACURA 1.8 110 B18C1 INTEGRA 94-00 B18C1
1.8898" (48.001 MM) 15, 33 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.4290 " (137.922 MM)
Finish Bushing I.D.: Piston to Rod: CONNECTING ROD OIL HOLE TO.8254-.8267" * (20.965-20.998 MM)
Pin Diameter: .8265-.8268" (20.993-21.001 MM)
Notes: * .0007-.0014" INTERFERENCE FIT "PRESS"
Comments: DOHC, VTEC, SFI, 1797 CC, GSR, 170 HP
ACURA 1.8 110 B18C5 INTEGRA 97-03 B18C5
1.8900" (48.000 MM) ROD BOLT STRETCH OF .005-.006"
(0.127-0.1524 MM)
Housing Bore Size: Torque:
Center to Center: 5.4290" (137.869 MM)
Finish Bushing I.D.: Piston to Rod: CONNECTING ROD OIL HOLE TO.8254-.8267" (20.965-20.998 MM)
Pin Diameter: .8265-.8268" (20.993-21.000 MM)
Comments: DOHC, VTEC, SPI, INTEGRA
ACURA 1.8 112 B18A1 INTEGRA 90-94 B18A1
1.8900-1.8907" (48.006-48.024 MM) 30 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.394" (137.007 MM)
Pin Bore I.D.: .8255-.8260" * (20.968-20.98 MM) Pin Type: LOCK
Finish Bushing I.D.: Piston to Rod: CONNECTING ROD OIL HOLE TO.8255-.8260" (20.968-20.98 MM)
Pin Diameter: .8265-.8268" (20.993-21.001 MM)
Casting Numbers: C7917, PR4
Notes: * .0005-.0013 PRESS FIT
Comments: DOHC, MPI, 1834 CC, 130 HP
ACURA 2.0 122 RSX 02-03 K20A2
1.8898" (48.000 MM)Housing Bore Size:
Center to Center: 5.4720" (138.988 MM)
Finish Bushing I.D.: .8650-.8652" (21.970-21.976 MM)
Pin Diameter: .8646-.8648" (21.961-21.965 MM)
Comments: DOHC, VTEC, PGM-FI
5ACURA Cylinders
ACURA 2.5 149 G25A4 95-98 G25A4
24 FT/LBSTorque:
Finish Bushing I.D.: 1.8900" (48.006 MM) *
Pin Diameter: .8659-.8661" (21.994-21.999 MM) *
Notes: * .0005-.0013 INTERFERENCE FIT
Comments: PGM-FI, 2.5TL
ACURA 2.5 150 G25A1 VIGOR 92-94 G25A1
1.8898-1.8906" (48.001-48.021 MM) 24 FT/LBS NUTSHousing Bore Size: Torque:
Piston to Rod: SQRT HOLE/LEFT
Comments: SOHC, MFI
17
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
6ACURA Cylinders
ACURA 2.5 151 C25A1 LEGEND 86-87 C25A1
2.1654-2.1663" (55.001-55.024 MM) 33 FT/LBSHousing Bore Size: Torque:
Casting Numbers: PH7
Notes: * MAX SIDE PLAY .016"
Comments: DOHC, MFI, STERLING
ACURA 2.7 163 C27A1 LEGEND 87-90 C27A1
2.1654-2.1663" (55.001-55.024 MM) 33 FT/LBSHousing Bore Size: Torque:
Center to Center: 6.010" (152.654 MM)
Pin Type: LOCK
Finish Bushing I.D.: .8640" (21.946 MM)
Pin Diameter: .8659-.8661" ** (21.994-21.999 MM)
Casting Numbers: PH7
Notes: ** OVERSIZE PIN AVAILABLE .8660-.8663
Comments: DOHC, MFI, 24 VALVE ENGINE
ACURA 3.0 182 C30A1 NSX 91-95 C30A1
2.1855-2.1860" (55.512-55.524 MM) 14 FT/LBS + 95 ADDITIONAL TURNHousing Bore Size: Torque:
Comments: DOHC, MFI
ACURA 3.2 193 V SLX 96-98
2.2434-2.2441" (56.982-57. MM) 40 FT/LBSHousing Bore Size: Torque:
Pin Diameter: .8660-.8663" (21.996-22.004 MM)
Comments: SOHC, SFI
ACURA 3.2 193 W SLX 96-99
2.2434-2.2441" (56.982-57. MM) 40 FT/LBSHousing Bore Size: Torque:
Pin Diameter: .8660-.8663" (21.996-22.004 MM)
Comments: DOHC, SFI
ACURA 3.2 196 C32A1 LEGEND 91-96 C32A1
2.2434-2.2441" (56.982-57.000 MM) 33 FT/LBS FOR NUTSHousing Bore Size: Torque:
Pin Bore I.D.: .8649-.8654" (21.968-21.981 MM) Pin Type: LOCK
Finish Bushing I.D.: .0015-.0013" PRESS (.038-.033 MM)
Pin Diameter: .8659-.8661" (21.994-21.999 MM)
Casting Numbers: PY3
Comments: SOHC, MFI
ACURA 3.2 196 C32A6 96-99 C32A6
33 FT/LBSTorque:
Finish Bushing I.D.: .8649-.8654" (21.968-21.981 MM) *
Pin Diameter: .8659-.8661" (21.994-21.999 MM) *
Notes: * .0005-.00013 INTERFERENCE FIT
Comments: SFI, 3.2TL
ACURA 3.2 196 J32A3 TL 01-05 J32A3
2.2835" (58.000 MM)Housing Bore Size:
Finish Bushing I.D.: .8650-.8652" (21.970-21.976 MM)
Pin Diameter: .8646-.8648" (21.962-21.965 MM)
Comments: SOHC, 60r V6, VTEC
ACURA 3.5 211 C35A1 96-98 C35A1
2.2434-2.2441" (56.982-57.000 MM) 33 FT/LBSHousing Bore Size: Torque:
Finish Bushing I.D.: .8649-.8654" (21.968-21.981 MM)
Pin Diameter: .8646-.8648" (21.961-21.966 MM)
Comments: SFI, 3.5RL
ACURA 3.5 214 X SLX 98-01
2.2434-2.2441" (56.982-57.000 MM) 40 FT/LBSHousing Bore Size: Torque:
Pin Diameter: .8660-.8663" (21.997-22.005 MM)
Comments: DOHC, SFI, SLX
4ALFA ROMEO Cylinders
ALFA ROMEO 1.6 96 62-81
2.1139-2.1145" (53.693-53.708 MM) 67-72 FT/LBSHousing Bore Size: Torque:
Comments: 105 ENGINE, GIULIA, 1600
18
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
4ALFA ROMEO Cylinders (cont.)
ALFA ROMEO 1.8 110 69-71
2.1139-2.1145" (53.693-53.708 MM) 37 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Finish Bushing I.D.: .8663-.8667" (22.004-22.014 MM) BLACK PIN
Pin Diameter: .8659-.8660" (21.994-21.996 MM) BLACK PIN *
Comments: DOHC
ALFA ROMEO 2.0 119 116 SPIDER 85-88
2.1139-2.1145" (53.693-53.708 MM) 37 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Finish Bushing I.D.: Piston to Rod: ROD #'s TO DRIVER SIDE OF EN.8663-.8667" (22.004-22.014 MM)
Pin Diameter: .8659-.8660" (21.994-21.996 MM) *
Notes: * BLACK PIN DIA.; WHITE PIN DIA. = .8660-.8661"
Comments: DOHC 2000 SPIDER
ALFA ROMEO 2.0 120 SPIDER
32-39 FT/LBSTorque:
Pin Diameter: .7872-.7874" (19.996-20.000 MM)
Comments: DOHC, SPIDER
6ALFA ROMEO Cylinders
ALFA ROMEO 2.5 152 119 MILANO 81-89
2.1854-2.1860" (55.509-55.524 MM) 39-44 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Finish Bushing I.D.: .8663-.8667" (22.004-22.014 MM)
Pin Diameter: .8659-.8660" (21.994-21.996 MM) *
Notes: * BLACK PIN DIA.; WHITE PIN DIA = .8660-.8661"
Comments: MILANO, GT
ALFA ROMEO 3.0 181 164 MILANO 88-89
2.1854-2.1860" (55.509-55.524 MM) 39-44 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Finish Bushing I.D.: .8663-.8667" (22.004-22.014 MM)
Pin Diameter: .8659-.8660" (21.994-21.996 MM) **
Notes: * BLACK PIN DIA.; WHITE PIN DIA = .8660-.8661"
Comments: MILANO, GT
2ALLIS CHALMERS Cylinders
ALLIS CHALMERS 1.3 77 S126 5020 S126
66-73 FT/LBSTorque:
Pin Type: FLOAT
Finish Bushing I.D.: 1.1026-1.1035" (28.006-28.029 MM)
Pin Diameter: 1.1020-1.1022" (27.991-27.996 MM)
Comments: TOYOSHA S126 DIESEL, MODEL 5020
ALLIS CHALMERS 1.5 90 S148 5030 S148
66-73 FT/LBSTorque:
Pin Type: FLOAT
Finish Bushing I.D.: 1.1026-1.1035" (28.006-28.029 MM)
Pin Diameter: 1.1020-1.1022" (27.991-27.996 MM)
Comments: TOYOSHA S148 DIESEL, MODEL 5030
3ALLIS CHALMERS Cylinders
ALLIS CHALMERS 1.0 61 CS100 75-82 CS100
2.0079-2.0086" (51.001-51.018 MM) 32-40 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.7087-5.7106" (145.001-145.049 MM)
Pin Type: LOCK
Finish Bushing I.D.: .9432-.9437" (23.957-23.97 MM)
Pin Diameter: .9445-.9447" (23.99-23.995 MM)
Comments: DIESEL, 5015 TRACTOR, TOYOSHA ENGINE
ALLIS CHALMERS 2.3 142 6140 3S233
2.4023" MAX (81.019 MM) 36-40 FT/LBSHousing Bore Size: Torque:
Center to Center: 6.6102-6.6181" (167.900-168.100 MM)
Pin Bore I.D.: 1.2205-1.2215" (31.000-31.025 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.1026-1.1035" (28.007-28.028 MM)
Pin Diameter: 1.1020-1.1022" (27.992-27.996 MM)
Comments: DIESEL, 6140 TRACTOR, 3S233 ENGINE
19
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
3ALLIS CHALMERS Cylinders (cont.)
ALLIS CHALMERS 2.3 143 5040
2.4628" (62.555 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Pin Bore I.D.: 1.4125-4.4140" (35.878-112.116 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.2600-1.2603" (32.004-32.012 MM)
Pin Diameter: 1.2592-1.2594" (31.984-31.989 MM)
Comments: 5040 TRACTOR, FIAT DIESEL, ALSO MINN MOLINE
ALLIS CHALMERS 2.3 143 D15 82-85 D15
2.4628" (62.555 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Comments: FIAT DIESEL
ALLIS CHALMERS 2.5 152 D 160 152
2.3950-2.3955" (60.833-60.846 MM) 65-70 FT/LBS PLAIN*,
45-50 FT/LBS CADMIUM-PLATED*
Housing Bore Size: Torque:
Center to Center: 8.8110-8.8130" (223.799-223.85 MM) Bore Diameter: .4375" (11.113 MM)
Pin Bore I.D.: 1.3747-1.3762" (34.917-34.955 MM) Pin Type: FLOAT
Pin Diameter: 1.2497-1.2500" (31.742-31.75 MM)
Casting Numbers: 31337140, 31337220
Notes: *EARLY ENGINES USED PLAIN SELF-LOCKING NUTS, LATER ENGINES USED SELF-LOCKING
CADMIUM-PLATED NUTS.
Comments: PERKINS D3.152 DIESEL, 160 TRACTOR
ALLIS CHALMERS 2.6 158 5045
2.4628" (62.555 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Pin Bore I.D.: 1.4125-1.4140" (35.878-35.916 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.2600-1.2603" (32.004-32.012 MM)
Pin Diameter: 1.2592-1.2594" (31.984-31.989 MM)
Comments: 5045 + 5050 TRACTOR, FIAT DIESEL
4ALLIS CHALMERS Cylinders
ALLIS CHALMERS 0.4 25 W 25
2.4995-2.5005" (63.487-63.513 MM) 35-45 FT/LBSHousing Bore Size: Torque:
Casting Numbers: U3988
Notes: NOTE; 2.375" CRANKPIN
ALLIS CHALMERS 1.0 60 H 60 60H
2.0615-2.0620" (52.362-52.375 MM) 35-40 FT/LBS
PIN CLAMPING BOLT 35-40 FT/LBS
Housing Bore Size: Torque:
Casting Numbers: 207459
Comments: 60H DIESEL
ALLIS CHALMERS 1.0 62 N G
1.6240-1.6245" (41.25-41.262 MM) 20-25 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Pin Diameter: .5434" (13.802 MM)
Casting Numbers: N56D-400, N62A400, N62D400, N62D-400
Comments: G GAS TRACTOR, CONTINENTAL
ALLIS CHALMERS 1.9 116 B BE
PIN CLAMPING BOLT 35-40 FT/LBSTorque:
Piston to Rod: 1&3 ROD OFFSET TOWARDS FLY
Casting Numbers: 207459
Notes: * ROD HOUSING BORES -.005" (.127 MM) SMALLER THAN THE CORRECT NUMBER. REPORTED MEMBER
# 26775 08-24-2004 MC
Comments: GAS, B TRACTOR, BE ENGINE
ALLIS CHALMERS 1.9 116 B B BE
2.0615-2.0620" (52.362-52.375 MM) * 35-40 FT/LBS
PIN CLAMPING BOLT 35-40 FT/LBS
Housing Bore Size: Torque:
Pin Type: LOCK
Piston to Rod: 1&3 ROD OFFSET TOWARDS FLY
Pin Diameter: .8131" (20.653 MM)
Casting Numbers: 207459
Notes: * ROD HOUSING BORES -.005" (.127 MM) SMALLER THAN THE CORRECT NUMBER. REPORTED MEMBER
# 26775 08-24-2004 MC
Comments: GAS, B TRACTOR, BE ENGINE
ALLIS CHALMERS 2.0 120 B B & C
Piston to Rod: 1&3 ROD OFFSET TOWARDS FLY
Comments: B & C TRACTORS
20
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
4ALLIS CHALMERS Cylinders (cont.)
ALLIS CHALMERS 2.1 125 B B & C
2.0615-2.0620" (52.362-52.375 MM) 35-40 FT/LBS
PIN CLAMP IN
Housing Bore Size: Torque:
Pin Type: LOCK
Piston to Rod: 1&3 ROD OFFSET TOWARDS FLY,
Pin Diameter: .8131" (20.653 MM)
Casting Numbers: 206975, 207459
Notes: B TRACTOR
Comments: GAS, B, C & CA TRACTOR
ALLIS CHALMERS 2.1 125 RC RC
2.0615-2.0620" (52.362-52.375 MM) 35-40 FT/LBS
PIN CLAMPING BOLT 35-40 FT/LBS
Housing Bore Size: Torque:
Pin Type: LOCK
Pin Diameter: .8131" (20.653 MM)
Casting Numbers: 207459
Comments: GAS, RC TRACTOR
ALLIS CHALMERS 2.2 139 G D10 & D12 D10 & D12
2.0615-2.0620" (52.362-52.375 MM) 35-40 FT/LBS
PIN CLAMPING BOLT 35-40 FT/LBS
Housing Bore Size: Torque:
Pin Type: LOCK
Pin Diameter: .8133-.8135" (20.658-20.663 MM)
Casting Numbers: 207459
Comments: GAS D10 AND D12, PRIOR-SER #D10-3501 & D123001
ALLIS CHALMERS 2.3 142
3.0625-3.0630" (77.788-77.8 MM) 65-75 FT/LBSHousing Bore Size: Torque:
Center to Center: 10.120" (257.048 MM)
Casting Numbers: 5150093, 5154265
ALLIS CHALMERS 2.4 149 D14 D14
2.0615-2.0620" (52.362-52.375 MM) 35-40 FT/LBSHousing Bore Size: Torque:
Pin Diameter: .8133-.8135" (20.658-20.663 MM)
Comments: D-14 GAS TRACTOR
ALLIS CHALMERS 2.4 149 D15 D15 D15
2.0615-2.0620" (52.362-52.375 MM) 35-40 FT/LBSHousing Bore Size: Torque:
Pin Diameter: .8133-.8135" (20.658-20.663 MM)
Comments: D-15 GAS TRACTOR
ALLIS CHALMERS 2.4 149 G D10 & D12 D10 & D12
2.0615-2.0620" (52.362-52.375 MM) 35-40 FT/LBSHousing Bore Size: Torque:
Pin Type: LOCK
Pin Diameter: .8133-.8135" (20.658-20.663 MM)
Comments: SERIES III D10 & D12,AFTER SER# D10-3500 & D123000
ALLIS CHALMERS 2.5 153
2.1600-2.1605" (54.864-54.877 MM) 50-60 FT/LBSHousing Bore Size: Torque:
Center to Center: 7.4375" (188.913 MM) Bore Diameter: .3750" (9.525 MM)
Finish Bushing I.D.: 1.1210-1.1230" (28.473-28.524 MM)
Casting Numbers: 4500141, B5708
Comments: FORKLIFT
ALLIS CHALMERS 2.5 153 D 153 153
2.1600-2.1605" (54.864-54.877 MM) 35-40 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Casting Numbers: 4500141, B-5708
ALLIS CHALMERS 2.5 153 G 153 153
2.1600-2.1605" (54.864-54.877 MM) 40-45 FT/LBSHousing Bore Size: Torque:
Center to Center: 7.373-7.377" (187.274-187.376 MM)
Pin Bore I.D.: 1.240-1.250" (31.496-31.75 MM) Pin Type: FLOAT
Pin Diameter: .9996-.9998" (25.39-25.395 MM)
Casting Numbers: 4500141, 4507347
Comments: FORKLIFT, TRACTOR
ALLIS CHALMERS 2.6 160 G1600 D15 SERIES II
2.0615-2.0620" (52.362-52.375 MM) 35-40 FT/LBSHousing Bore Size: Torque:
Pin Type: LOCK*
Pin Diameter: .8133-.8135" (20.658-20.663 MM)
Casting Numbers: 207459, 237633
Comments: G1600 GAS, D15 SERIES II
21
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
4ALLIS CHALMERS Cylinders (cont.)
ALLIS CHALMERS 2.9 175
2.1600-2.1605" (54.864-54.877 MM) 50-60 FT/LBSHousing Bore Size: Torque:
ALLIS CHALMERS 2.9 175 D D15 D-15 DIESEL
2.1600-2.1605" (54.864-54.877 MM) 40-50 FT/LBS
PIN CLAMPING BOLT 35-40 FT/LBS
Housing Bore Size: Torque:
Pin Type: FLOAT
Pin Diameter: .9995-.9997" (25.387-25.392 MM)
Casting Numbers: 207459, 237633, 4500141
Comments: D-15 DIESEL
ALLIS CHALMERS 3.3 200 443 443T
2.5620-2.5625" (65.075-65.088 MM) SEE TB 2018-RHousing Bore Size: Torque:
Pin Type: FLOAT
Comments: 443T DIESEL
ALLIS CHALMERS 3.3 200 D 6060 433T
2.5620-2.5625" (65.075-65.088 MM) SEE TB 2018-RHousing Bore Size: Torque:
Center to Center: 7.2480-7.2520" (184.099-184.201 MM)
Pin Type: FLOAT
Finish Bushing I.D.: 1.2527-1.2532" (31.819-31.831 MM)
Pin Diameter: 1.2515-1.2517" (31.788-31.793 MM)
Casting Numbers: 4007878, 4020888
Comments: 6060, 6070, & 433I 6080 TRACTOR, F2 COMBINE
ALLIS CHALMERS 3.3 201 WC WC & WF
2.4995-2.5005" (63.487-63.513 MM) 70 FT/LBS CASTELLATED NUTS,
40 FT/LBS LUG LOCK NUTS
Housing Bore Size: Torque:
Pin Type: LOCK
Pin Diameter: .9892" (25.126 MM)
Casting Numbers: U3190, U3988
Comments: GAS, WC & WF TRACTORS
ALLIS CHALMERS 3.3 201 WD WD
2.4995-2.5005" (63.487-63.513 MM) 70 FT/LBS CASTELLATED NUTS,
40 FT/LBS LUG LOCK NUTS
Housing Bore Size: Torque:
Pin Type: LOCK
Pin Diameter: .9892" (25.126 MM)
Casting Numbers: U3190, U3988
Comments: GAS, WD TRACTORS
ALLIS CHALMERS 3.6 220 D346 D346
2.5883-2.5893" (65.743-65.768 MM) 44-46 FT/LBSHousing Bore Size: Torque:
Center to Center: 6.9990-7.0010" (177.775-177.825 MM)
Pin Bore I.D.: 1.3720-1.3730" (34.849-34.874 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.2501-1.2506" (31.753-31.765 MM)
Pin Diameter: 1.2495-1.2497" (31.737-31.742 MM)
Comments: NON-TURBO DIESEL
ALLIS CHALMERS 3.6 220 D346T D346T
2.5883-2.5893" (65.743-65.768 MM) 44-46 FT/LBSHousing Bore Size: Torque:
Center to Center: 6.9990-7.0010" (177.775-177.825 MM)
Pin Bore I.D.: 1.3720-1.3730" (34.849-34.874 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.2501-1.2506" (31.753-31.765 MM)
Pin Diameter: 1.2495-1.2497" (31.737-31.742 MM)
Comments: TURBO DIESEL
ALLIS CHALMERS 3.7 226 170 & 175
2.4995-2.5005" (63.487-63.513 MM) 45-55 FT/LBSHousing Bore Size: Torque:
Pin Type: LOCK
Piston to Rod: PIN C/BOLT-CAM
Pin Diameter: .9893-.9895" (25.128-25.133 MM)
Casting Numbers: U3988
Comments: GAS, MODEL 170 & 175
ALLIS CHALMERS 3.7 226 G D17 54-57 D17 SERIES IV
2.4995-2.5005" (63.487-63.513 MM) 45-55 FT/LBSHousing Bore Size: Torque:
Pin Type: LOCK
Piston to Rod: PIN C/BOLT-CAM
Pin Diameter: .9893-.9895" (25.128-25.133 MM)
Casting Numbers: 232441, 232441, U3988
Comments: GAS, D17 SERIES IV TRACTOR
22
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
4ALLIS CHALMERS Cylinders (cont.)
ALLIS CHALMERS 3.7 226 W WD45 WD45
2.4995-2.5005" (63.487-63.513 MM) 35-45 FT/LB SELF LOCKING NUTS,70
FT/LBS CASTELLATED NUTS
Housing Bore Size: Torque:
Pin Type: LOCK
Piston to Rod: LOCK PIN-CAM
Pin Diameter: .9892" (25.126 MM)
Casting Numbers: 4500141, U3988
Comments: GAS, WD45 TRACTOR
ALLIS CHALMERS 3.9 236 170 & 175
2.6460-2.6465" (67.208-67.221 MM) 65-70 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Pin Diameter: 1.3748-1.3750" (34.92-34.925 MM)
Casting Numbers: 31337180JGSB, 31337310, 59554
Comments: DIESEL, PERKINS, MODEL 170 & 175
ALLIS CHALMERS 5.6 344 6000 HD6
3.0250-3.0255" (76.835-76.848 MM) 120-130 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4349339
Comments: HD-6
ALLIS CHALMERS 5.6 344
3.0250-3.0255" (76.835-76.848 MM) 120-130 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4349339
ALLIS CHALMERS 5.6 344 HD HD6 HD6
3.0250-3.0255" (76.835-76.848 MM) 120-130 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Finish Bushing I.D.: 1.5027-1.5032" (38.169-38.181 MM)
Pin Diameter: 1.5015-1.5017" (38.138-38.143 MM)
Casting Numbers: 4349339
Comments: HD-6 DIESEL
6ALLIS CHALMERS Cylinders
ALLIS CHALMERS 3.8 230 G-230 G-230
2.1600-2.1605" (54.864-54.877 MM) 40-45 FT/LBSHousing Bore Size: Torque:
Center to Center: 7.373-7.377" (187.274-187.376 MM) Bore Diameter: .3750" (9.525 MM)
Pin Bore I.D.: 1.1240-1.1250" (28.55-28.575 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.0001-1.0006" (25.403-25.415 MM)
Pin Diameter: .9995-1.0000" (25.387-25.4 MM)
Casting Numbers: 4500141
Comments: GAS
ALLIS CHALMERS 3.8 230 D D17 D-17
2.1600-2.1605" (54.864-54.877 MM) 40-45 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4500141
Comments: D-17 DIESEL
ALLIS CHALMERS 3.8 230 G 230 230
2.1600-2.1605" (54.864-54.877 MM) 40-45 FT/LBSHousing Bore Size: Torque:
Center to Center: 7.373-7.377" (187.274-187.376 MM)
Pin Bore I.D.: 1.1240-1.1250" (28.55-28.575 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.0001-1.0006" (25.403-25.415 MM)
Pin Diameter: .9995-1.0000" (25.387-25.4 MM)
Casting Numbers: 4500141
Notes: BUSHING CLEARANCE .0003-.0010
Comments: GAS
ALLIS CHALMERS 3.8 230 W WD45 WD45
2.1600-2.1605" (54.864-54.877 MM) 30-40 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Pin Diameter: .9996-.9998" (25.39-25.395 MM)
Casting Numbers: 4500141
Comments: DIESEL, WD45 TRACTOR
23
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
6ALLIS CHALMERS Cylinders (cont.)
ALLIS CHALMERS 4.3 262 D19 D-19 DIESEL
2.1600-2.1605" (54.864-54.877 MM) 40-45 FT/LBSHousing Bore Size: Torque:
Center to Center: 7.373-7.377" (187.274-187.376 MM)
Pin Bore I.D.: 1.1240-1.1250" (28.55-28.575 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.0001-1.0006" (25.403-25.415 MM)
Pin Diameter: .99955-.99975" (25.389-25.394 MM)
Comments: D-19 DIESEL TRACTOR
ALLIS CHALMERS 4.3 262 D D17 D17 & D19
2.1600-2.1605" (54.864-54.877 MM) 40-50 FT/LBSHousing Bore Size: Torque:
Center to Center: 7.3730-7.3770" (187.274-187.376 MM)
Pin Bore I.D.: 1.1240-1.1250" (28.55-28.575 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.0001-1.0006*" (25.403-25.415 MM)
Pin Diameter: .9995-.9997" (25.387-25.392 MM)
Casting Numbers: 4500141
Notes: * .0004-.0010 CLR
Comments: DIESEL, D17 & D19 TRACTOR
ALLIS CHALMERS 4.3 262 G D19 D-19 GAS
2.1600-2.1605" (54.864-54.877 MM) 40-50 FT/LBSHousing Bore Size: Torque:
Center to Center: 7.373-7.377" (187.274-187.376 MM)
Pin Bore I.D.: 1.1240-1.1250" (28.55-28.575 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.1005-1.1006" (27.953-27.955 MM)
Pin Diameter: .9995-.9997" (25.387-25.392 MM)
Casting Numbers: 4500141
Comments: GAS, D-19 TRACTOR
ALLIS CHALMERS 4.3 265 G 2500
2.5620-2.5625" (65.075-65.088 MM) 40-45 FT/LBSHousing Bore Size: Torque:
Pin Diameter: 1.2515-1.2517" (31.788-31.793 MM)
Casting Numbers: 4020888
Comments: GAS, 180, 185, 190 TRACTOR
ALLIS CHALMERS 4.5 273
2.1600-2.1605" (54.864-54.877 MM) 50-60 FT/LBSHousing Bore Size: Torque:
ALLIS CHALMERS 4.5 273 D 273 273
2.1600-2.1605" (54.864-54.877 MM) 35-40 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4500141
ALLIS CHALMERS 4.9 301 D 180 2800
2.5620-2.5625" (65.075-65.088 MM) SEE TB 2018-RHousing Bore Size: Torque:
Center to Center: 7.248-7.252" (184.099-184.201 MM)
Pin Bore I.D.: 1.3750-1.3755" (34.925-34.938 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.2527-1.2532" (31.819-31.831 MM)
Pin Diameter: 1.2515-1.2517" (31.788-31.793 MM)
Casting Numbers: 4007878, 4020888
Comments: 2800 DIESEL, 180, 185, & 190 TRACTORS
ALLIS CHALMERS 4.9 301 D 200 2900
2.5620-2.5625" (65.075-65.088 MM) SEE TB 2018-RHousing Bore Size: Torque:
Center to Center: 7.248-7.252" (184.099-184.201 MM)
Pin Bore I.D.: 1.3750-1.3755" (34.925-34.938 MM) Pin Type: FLOAT
Finish Bushing I.D.: Piston to Rod: #'S TOWARD CAM1.2527-1.2532" (31.819-31.831 MM)
Pin Diameter: 1.2515-1.2517" (31.788-31.793 MM)
Casting Numbers: 4007878, 4020888
Comments: 2900 DIESEL, 200 & 7000 TRACTOR
ALLIS CHALMERS 4.9 301 D 7010 649T
2.5620-2.5625" (65.075-65.088 MM) SEE TB 2018-RHousing Bore Size: Torque:
Center to Center: 7.248-7.252" (184.099-184.201 MM)
Pin Bore I.D.: 1.3750-1.3755" (34.925-34.938 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.2527-1.2532" (31.819-31.831 MM)
Pin Diameter: 1.2515-1.2517" (31.788-31.793 MM)
Casting Numbers: 4007878, 4020888
Comments: TURBO DIESEL,545B LOADER,MODEL 7010,7020,8010,649I
24
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
6ALLIS CHALMERS Cylinders (cont.)
ALLIS CHALMERS 4.9 301 G 190XT 2800
2.5620-2.5625" (65.075-65.088 MM) SEE TB 2018-RHousing Bore Size: Torque:
Center to Center: 7.248-7.252" (184.099-184.201 MM)
Pin Bore I.D.: 1.3750-1.3755" (34.925-34.938 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.2527-1.2532" (31.819-31.831 MM)
Pin Diameter: 1.2515-1.2517" (31.788-31.793 MM)
Casting Numbers: 4020888
Comments: G2800XT GAS, 190XT TRACTOR
ALLIS CHALMERS 7.0 426 3400 70-85 D21 SERIES II
2.9700-2.9705" (75.438-75.451 MM) SEE TB 2018-RHousing Bore Size: Torque:
Center to Center: 8.498-8.502" (215.849-215.951 MM)
Pin Bore I.D.: 1.6230" (41.224 MM) Pin Type: FLOAT
Finish Bushing I.D.: Piston to Rod: ROD CYLINDER NUMBERS TOWA1.5010-1.5020" (38.125-38.151 MM)
Pin Diameter: 1.5011-1.5013" (38.128-38.133 MM)
Casting Numbers: 4349339
Comments: 3400, 3500 DIESEL, D21 SERIES II, 210 & 220
ALLIS CHALMERS 7.0 426 D 3400 70-85 670T
2.9700-2.9705" (75.438-75.451 MM) SEE TB 2018-RHousing Bore Size: Torque:
Center to Center: 8.498-8.502" (215.849-215.951 MM)
Pin Bore I.D.: 1.6230" (41.224 MM) Pin Type: FLOAT
Piston to Rod: ROD CYLINDER NUMBERS TOWA
Pin Diameter: 1.5011-1.5013" (38.128-38.133 MM)
Casting Numbers: 4036181, 4349339
Comments: 3400,3500 MARK II,670T,3700,3750 MARKII,7030, 7080
ALLIS CHALMERS 7.0 426 D-21 D21 70-70 D21
2.9700-2.9705" (75.438-75.451 MM) SEE TB 2018-RHousing Bore Size: Torque:
Center to Center: 8.498-8.502" (215.849-215.951 MM)
Pin Bore I.D.: 1.6230" (41.224 MM) Pin Type: FLOAT
Piston to Rod: ROD CYLINDER NUMBERS TOWA
Casting Numbers: 4349339
Comments: D-21 DIESEL
ALLIS CHALMERS 7.0 426 I 8030 670I & 670T
2.9700-2.9705" (75.438-75.451 MM) 80-85 FT/LBS 6 PT BOLTS,
68 FT/LBS 12 PT BOLTS
Housing Bore Size: Torque:
Center to Center: 8.498-8.502" (215.849-215.951 MM)
Pin Bore I.D.: 1.8750-1.8755" (47.625-47.638 MM) Pin Type: FLOAT
Finish Bushing I.D.: Piston to Rod: ROD CYLINDER NUMBERS TOWA1.7527-1.7532" (44.519-44.531 MM)
Pin Diameter: 1.7511-1.7513" (44.478-44.483 MM)
Casting Numbers: 402733, 4036541
Comments: 670I/670T DIESEL, 8030, 8050, 8070 SERIES TRACTORS
ALLIS CHALMERS 8.5 516 10000 10000
3.0250-3.0255" (76.835-76.848 MM) 120-130 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4349339
ALLIS CHALMERS 8.5 516 11000 HD11
3.0250-3.0260" (76.835-76.86 MM) 120-130 FT/LBSHousing Bore Size: Torque:
Center to Center: 10.4980-10.5020" (266.649-266.751 MM)
Pin Bore I.D.: 1.8090" (45.949 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.6277-1.6282" (41.344-41.356 MM)
Pin Diameter: 1.6265-1.6267" (41.313-41.318 MM)
Casting Numbers: 4349339
Comments: HD-11, 11000 DIESEL
ALLIS CHALMERS 8.5 516 11000 11000
3.0250-3.0255" (76.835-76.848 MM) 120-130 FT/LBSHousing Bore Size: Torque:
Center to Center: 10.498-10.502" (266.649-266.751 MM)
Pin Bore I.D.: 1.8155-1.8175" (46.114-46.165 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.6277-1.6282" (41.344-41.356 MM)
Pin Diameter: 1.6265-1.6267" (41.313-41.318 MM)
Casting Numbers: 4349339
Comments: 11000 DIESEL
25
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
6ALLIS CHALMERS Cylinders (cont.)
ALLIS CHALMERS 8.5 516 745HB 685
3.0250-3.0260" (76.835-76.860 MM) 160 FT/LBSHousing Bore Size: Torque:
Center to Center: 10.498-10.502" (266.649-266.751 MM)
Pin Bore I.D.: 2.0600-2.0605" (52.320-52.340 MM) Pin Type: FLOAT
Finish Bushing I.D.: 1.8757-1.8762" (47.640-47.660 MM)
Pin Diameter: 1.8745-1.8747" (47.610-47.620 MM)
Comments: DIESEL, 745HB TRACTOR, HD11EP CRAWLER
ALLIS CHALMERS 12.0 731 6120T 6120T
3.6245-3.6250" (92.062-92.075 MM) 190-200 FT/LBSHousing Bore Size: Torque:
Center to Center: 11.998-12.002" (304.749-304.851 MM)
Pin Bore I.D.: 2.4365-2.4375" (61.887-61.913 MM) Pin Type: FLOAT
Finish Bushing I.D.: Piston to Rod: SQRT/HOLE/CAM2.2527-2.2533" (57.219-57.234 MM)
Pin Diameter: 2.2515-2.2517" (57.188-57.193 MM)
Casting Numbers: 4393053
Comments: MODEL 8550 DIESEL
ALLIS CHALMERS 13.1 799 19000 19000 MKII
3.6245-3.625" (92.062-92.075 MM) 190-200,245 FT/LBSHousing Bore Size: Torque:
Center to Center: 11.998-12.002" (304.749-304.851 MM)
Pin Bore I.D.: 2.249-2.250" (57.125-57.15 MM) Pin Type: FLOAT
Comments: MKII, FIAT ALLIS
ALLIS CHALMERS 13.8 844 16000T 16000T, 17000
3.6245-3.6250" (92.062-92.075 MM) 190-200,245 FT/LBSHousing Bore Size: Torque:
Center to Center: 12.498-12.502" (317.449-317.551 MM) *
Pin Bore I.D.: 2.4365-2.4375" (61.887-61.913 MM) Pin Type: FLOAT
Finish Bushing I.D.: 2.2527-2.2533" (57.219-57.234 MM)
Pin Diameter: 2.2515-2.2517" (57.188-57.193 MM)
Notes: * 3 VALVE ENGINE, 4 VALVE ENGINE IS 11.998-12.002"
Comments: 16000T, 17000 MKII, 4 VALVE HEAD
ALLIS CHALMERS 13.8 844 21000 21000 MKII
3.6245-3.625" (92.062-92.075 MM) 190-200, 245 FT/LBSHousing Bore Size: Torque:
Center to Center: 11.998-12.002" (304.749-304.851 MM)
Pin Bore I.D.: 2.249-2.250" (57.125-57.15 MM) Pin Type: FLOAT
Comments: MKII, FIAT ALLIS
ALLIS CHALMERS 13.8 844 25000 25000 MKII
3.6245-3.6250" (92.062-92.075 MM) 190-200,245 FT/LBSHousing Bore Size: Torque:
Center to Center: 11.998-12.002" (304.749-304.851 MM)
Pin Bore I.D.: 2.2527-2.2533" (57.219-57.234 MM) Pin Type: FLOAT
Finish Bushing I.D.: 2.4365-2.4375" (61.887-61.913 MM)
Pin Diameter: 2.2515-2.2517" (57.188-57.193 MM)
Comments: LARGE DIESEL, MKII, FIAT ALLIS
ALLIS CHALMERS 13.8 844 6138T 262B
3.6245-3.6250" (92.062-92.075 MM) 190-200 FT/LBSHousing Bore Size: Torque:
Center to Center: 11.998-12.002" (304.749-304.851 MM)
Pin Bore I.D.: 2.4365-2.4375" (61.887-61.913 MM) Pin Type: FLOAT
Finish Bushing I.D.: Piston to Rod: SQRT/HOLE/CAM2.2527-2.2533*" (57.219-57.234 MM)
Pin Diameter: 2.2515-2.2517" (57.188-57.193 MM)
Casting Numbers: 4393053
Notes: *PIN CLR .0001-.0007
Comments: 262B SCRAPPER, 21C
ALLIS CHALMERS 34.4 2,100 2100 HD21
3.4995-3.5000" (88.887-88.9 MM) 150-160 FT/LBSHousing Bore Size: Torque:
Comments: HD-21
4AUDI Cylinders
AUDI 1.5 90 XV 73-74
1.9291-1.9298" (48.999-49.017 MM)Housing Bore Size:
Casting Numbers: 056
Comments: EFI, XW, XY, XZ, ZD, ZE
AUDI 1.6 97 CR 82-83
1.9921-1.9929" (50.599-50.62 MM) 22 FT/LBSHousing Bore Size: Torque:
Piston to Rod: TANGS-AUX SH
Casting Numbers: 068
Comments: DIESEL, TURBO, CY, JK
26
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
4AUDI Cylinders (cont.)
AUDI 1.6 97 YG 75-80
1.9291-1.9298" (48.999-49.017 MM)Housing Bore Size:
Comments: EFI, YH, YK, YM
AUDI 1.7 105 81-83
1.9291-1.9298" (48.999-49.017 MM) 33 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.354" (135.992 MM)
Casting Numbers: 056
Comments: EFI, VW ENGINE, WATER COOLED
AUDI 1.8 109 AEB 96-03 AEB
1.9921-1.9929" (50.599-50.620 MM) 22 FT/LBS, +90Housing Bore Size: Torque:
Comments: DOHC, TURBO, 5 VALVE PER CHAMBER
AUDI 1.8 109 JN 4000 SERIES 84
1.9921-1.9929" (50.599-50.62 MM) 22 FT/LBS + 90Housing Bore Size: Torque:
Comments: EFI GAS, 4000S
AUDI 1.8 109 MG 85-87
1.9921-1.9929" (50.599-50.62 MM) 22 FT/LBS + 90Housing Bore Size: Torque:
Comments: MFI, GAS
AUDI 1.8 112 84-87
1.9921-1.9929" (50.599-50.62 MM)Housing Bore Size:
Comments: SOHC
AUDI 1.8 112 DOHC 86-88
1.9921-1.9929" (50.599-50.62 MM) 22 FT/LBS + 90Housing Bore Size: Torque:
Casting Numbers: 411.105.411
Comments: DOHC
AUDI 1.9 114 ZJ 74-77
2.0315-2.0322" (51.6-51.618 MM)Housing Bore Size:
Comments: EFI, ZN, ZU, ZZ
AUDI 1.9 114 ZL 73
2.0315-2.0322" (51.6-51.618 MM)Housing Bore Size:
Comments: 2BC, ZW
AUDI 2.0 121 3A 80 SERIES 88-90
1.9921-1.9929" (50.599-50.62 MM) 22 FT/LBS + 90Housing Bore Size: Torque:
Comments: SOHC, MFI, 80 SERIES CAR
AUDI 2.0 121 A/J 77-79
2.0315-2.0322" (51.6-51.618 MM) 41 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.667-5.671" (143.942-144.043 MM)
Pin Bore I.D.: .9454-.9456" (24.013-24.018 MM) Pin Type: LOCK
Finish Bushing I.D.: .9454-.9456" (24.013-24.018 MM)
Pin Diameter: .9447-.9449" (23.995-24. MM)
Comments: JEEP, OHC
5AUDI Cylinders
AUDI 2.0 121 D 5000 SERIES 80-83
1.9921-1.9929" (50.599-50.62 MM) 33 FT/LBS *Housing Bore Size: Torque:
Center to Center: 5.354" (135.992 MM)
Finish Bushing I.D.: Piston to Rod: * SEE COMMENTS BOX BELOW.9449" (24. MM)
Comments: DIESEL, TURBO & NON-TURBO, 5000
AUDI 2.0 121 DE 82-85
1.9921-1.9929" (50.599-50.62 MM) 33 FT/LBS *Housing Bore Size: Torque:
Center to Center: 5.667-5.671" (143.942-144.043 MM)
Finish Bushing I.D.: Piston to Rod: * SEE COMMENTS BOX BELOW.9449" (24. MM)
Comments: TURBO DIESEL
AUDI 2.1 131 KH 5000 SERIES 84-86
1.9921-1.9929" (50.599-50.62 MM)Housing Bore Size:
Casting Numbers: 056
Comments: EFI, GAS, 5000 TURBO & NON TURBO
AUDI 2.1 131 WD 5000 SERIES 78-83
1.9291-1.9298" (48.999-49.017 MM)Housing Bore Size:
Pin Type: LOCK
Casting Numbers: 056
Comments: GAS, EFI, 5000, TURBO & NON TURBO, WE, WK
27
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
5AUDI Cylinders (cont.)
AUDI 2.2 136 3B 91-92
1.9921-1.9929" (50.599-50.62 MM) 22 FT/LBS, + 90Housing Bore Size: Torque:
Notes: LESS NOTCHES 44 FT.LB
WITH NOTCHES 22 FT.LB, PLUS AN ADDITIONAL 1/4 (90) TURN.
Comments: SOHC, EFI, TURBO, GAS
AUDI 2.2 136 KX 5000 SERIES 83-87
1.9291-1.9298" (48.999-49.017 MM) 22 FT/LBS, + 90Housing Bore Size: Torque:
Comments: MFI, GT COUPE, JT/5000S
AUDI 2.2 136 KZ 5000 SERIES 85-86
1.9921-1.9929" (50.599-50.62 MM) 22 FT/LBS, + 90Housing Bore Size: Torque:
Comments: EFI, 5000S, WAGON
AUDI 2.2 136 MC 5000 SERIES 86-91
1.9921-1.9929" (50.599-50.62 MM) 37 FT/LBSHousing Bore Size: Torque:
Comments: SOHC, MFI, TURBO, 5000CS, 200, QUATTRO
AUDI 2.3 141 7A COUPE 89-91
1.9921-1.9929" (50.599-50.62 MM) 37 FT/LBSHousing Bore Size: Torque:
Comments: EFI, COUPE, QUATTRO
AUDI 2.3 141 NF QUATTRO 87-91
1.9921-1.9929" (50.599-50.62 MM) 37 FT/LBSHousing Bore Size: Torque:
Comments: MFI, QUATTRO, 100
AUDI 2.3 141 NG COUPE 87-92
1.9921-1.9929" (50.599-50.62 MM) 37 FT/LBSHousing Bore Size: Torque:
Comments: MFI, COUPE, 90 QUATTRO
6AUDI Cylinders
AUDI 2.7 163 APB S4 00-02
2.2670-2.2680" (57.559-57.612 MM) M8=22 FT/LBS, +90r,
M8.5=30 FT/LBS, +90r
REPLACE BOLTS
Housing Bore Size: Torque:
Center to Center: 6.022-6.024" (152.958-153.009 MM)
Pin Type: FLOAT
Finish Bushing I.D.: .8270" (21.005 MM)
Pin Diameter: .8267" (21.000 MM)
Comments: S4 TURBO
AUDI 2.8 169 AAH 92-94 AAH
15 FT/LBS, + 90 VERTICAL *,
295 FT/LBS HORIZONTAL *
Torque:
Notes: * USE NEW BOLTS
Comments: SOHC, 12 VALVE, MFI
AUDI 2.8 169 AHA QUATTRO 98-01 AHA
2.2670-2.2680" (57.559-57.612 MM) M8=22 FT/LBS +90, M8.5=30 FT/LBS +90r
REPLACE BOLTS
Housing Bore Size: Torque:
Center to Center: 6.0220-6.0240" (152.958-153.009 MM)
Pin Type: FLOAT
Finish Bushing I.D.: .8270" (21.005 MM)
Pin Diameter: .8267" (21.000 MM)
Casting Numbers: 078J
Comments: DOHC, A6, 30 VALVE, 2000 + 2001 VIN ATQ
AUDI 2.8 170 AFC 90 SERIES 95
22 FT/LBS, +90
USE NEW
Torque:
Comments: SFI, MODEL 90
AUDI 2.8 170 AFC* CABRIOLET 96-98
22 FT/LBS, + 90 USE NEWTorque:
Comments: SOHC, SFI, MODELS A4, A6, CABRIOLET
28
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
4AUSTIN Cylinders
AUSTIN 0.9 58 SPRITE 56-65
1.7705-1.7710" (44.971-44.983 MM) 35 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.750" (146.050 MM)
Pin Type: LOCK
Pin Diameter: .6244-.6246" (15.860-15.865 MM)
Casting Numbers: 17009 EVEN, 17010 ODD
Comments: SPRITE, 948CC
AUSTIN 0.9 58 C 52-62
1.7705-1.7710" (44.971-44.983 MM) 35 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.750" (146.050 MM)
Pin Type: LOCK
Pin Diameter: .6244-.6246" (15.860-15.865 MM)
Casting Numbers: 17009, 17010
Comments: 948CC, SEE MG AS WELL
AUSTIN 1.1 67 62-72
1.7705-1.7710" (44.971-44.983 MM) 35 FT/LBSHousing Bore Size: Torque:
Piston to Rod: Squirt hole away from camshaft
Casting Numbers: G-124 EVEN, G-127 ODD
AUSTIN 1.1 67 C 64
1.7705-1.7710" (44.971-44.983 MM) 35 FT/LBSHousing Bore Size: Torque:
Casting Numbers: G124, G127
Comments: SEE MG AS WELL
AUSTIN 1.2 73 C 54-59
2.0210-2.0215" (51.333-51.346 MM) 23-25 FT/LBSHousing Bore Size: Torque:
Comments: SEE MG AS WELL
AUSTIN 1.2 78 64
1.8955-1.8960" (48.146-48.158 MM)Housing Bore Size:
Casting Numbers: 507, AEG-521
AUSTIN 1.5 91 C 54-61
2.0210-2.0215" (51.333-51.346 MM) 23-25 FT/LBSHousing Bore Size: Torque:
Comments: SEE MG AS WELL
AUSTIN 1.6 99 C 61-72
2.0210-2.0215" (51.333-51.346 MM) 23-25 FT/LBSHousing Bore Size: Torque:
Comments: SEE MG AS WELL
AUSTIN 1.8 110 C 64-80
2.0210-2.0215" (51.333-51.346 MM) 40-45 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 3596, 3597
Comments: SEE MG AS WELL
AUSTIN 1.8 112 73-75
2.0210-2.0215" (51.333-51.346 MM) 40-45 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 3596, 3597
Notes: MARINA - PRESS FIT
6AUSTIN Cylinders
AUSTIN 2.6 159 100-6 56-59
2.1140-2.1145" (53.696-53.708 MM) 60-65 FT/LBSHousing Bore Size: Torque:
Pin Bore I.D.: BOLT TYPE
Pin Diameter: BOLT TYPE PIN
Notes: SEE AUSTIN HEALEY 3000 IF BUSHING IS USED
Comments: INTAKE MANIFOLD CAST AS PART OF HEAD
AUSTIN 3.0 183 3000 59-67
2.1140-2.1145" (53.696-53.708 MM) 50 FT/LBSHousing Bore Size: Torque:
Center to Center: 6.4980-6.5044" (165.049-165.212 MM)
Pin Bore I.D.: .995-1.000" (25.273-25.4 MM)
Finish Bushing I.D.: .8748-.8750" (22.22-22.225 MM)
Pin Diameter: .8748-.8750" (22.22-22.225 MM)
Comments: 3000 CAR, INTAKE CAST SEPARATE FROM HEAD
29
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
4BEDFORD Cylinders
BEDFORD 3.6 220 220
2.5195-2.5200" (63.995-64.008 MM) 55-65 FT/LBS USE NEW BOLTSHousing Bore Size: Torque:
Finish Bushing I.D.: 1.3754-1.3759" (34.935-34.948 MM)
Pin Diameter: 1.3748-1.3750" (34.92-34.925 MM)
Comments: DIESEL
6BEDFORD Cylinders
BEDFORD 5.4 330 330
2.5195-2.5200" (63.995-64.008 MM) 55-65 FT/LBS USE NEW BOLTSHousing Bore Size: Torque:
Finish Bushing I.D.: 1.3754-1.3759" (34.935-34.948 MM)
Pin Diameter: 1.3748-1.3750" (34.92-34.925 MM)
Comments: DIESEL
4BMW Cylinders
BMW 1.8 108 M10B 318I 84-85
2.0472-2.0476" (51.999-52.009 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.311-5.319" (134.899-135.103 MM)
Comments: VIN M10B18, MFI, 318I, 320I
BMW 1.8 108 M10B 320I 80-83
2.0472-2.0476" (51.999-52.009 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.311-5.319" (134.899-135.103 MM)
Comments: VIN M10B18, MFI, 320I
BMW 1.8 110 318I 91-95 M42B18
1.8898-1.8904" (48.001-48.016 MM) 15 FT/LBS + 70Housing Bore Size: Torque:
Pin Bore I.D.: .9472-.9488" (24.059-24.1 MM)
Finish Bushing I.D.: .8663-.8665" (22.004-22.009 MM)
Comments: DOHC, 318 IC & IS SERIES
BMW 1.8 110 M42 318I 93-95
1.8898-1.8904" (48.001-48.016 MM) 17 FT/LBS, + 70Housing Bore Size: Torque:
Center to Center: 5.5120" (140 MM)
Pin Bore I.D.: .9472-.9488" (24.059-24.1 MM)
Finish Bushing I.D.: .8663-.8665" (22.004-22.009 MM)
Comments: DOHC, SFI, 318I
BMW 1.9 116 M44 Z3 92-98 M44
1.8898-1.8904" (48.000-48.016 MM) 15 FT/LBS, +70r (REPLACE, WASH & OIL
SCREWS)
Housing Bore Size: Torque:
Pin Bore I.D.: .9447-.9457" (23.995-24.021 MM)
Finish Bushing I.D.: .8663-.8666" (22.005-22.012 MM)
Comments: DOHC, Z3 ROADSTER (E36/7), M44
BMW 2.0 121 M10 2002 73-76
2.0472-2.0476" (51.999-52.009 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Center to Center: 5.314" (134.976 MM)
Finish Bushing I.D.: .8663" (22.004 MM)
Comments: 2BC, 2002
BMW 2.0 121 M10 320I 77-79
2.0472-2.0476" (51.999-52.009 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Comments: EFI, 320I
BMW 2.3 140 S14 M3 88-91
2.0472-2.0479" (51.999-52.017 MM) 7,22 FT/LBS + 60-62Housing Bore Size: Torque:
Finish Bushing I.D.: .8669-.8671" (22.019-22.024 MM)
Comments: DOHC, M3, MFI
6BMW Cylinders
BMW 2.4 149 M21D 524 85-86
1.8898-1.8904" (48.001-48.016 MM) 14 FT/LBS + 70Housing Bore Size: Torque:
Casting Numbers: 12756921B
Comments: VIN M21D24, TURBO DIESEL, 524 MODEL
BMW 2.5 152 325I 87-90 M20
1.8898-1.8901" (48.001-48.009 MM) 15 FT/LBS + 70 USE NEW BOLTSHousing Bore Size: Torque:
Pin Bore I.D.: .9449-.9461" (24.-24.031 MM)
Finish Bushing I.D.: Piston to Rod: PISTON ARROW TO RIGHT AND R.8663-.8665" (22.004-22.009 MM)
Casting Numbers: 1717085
Comments: SOHC, MFI, 325I, 325IC, 325IS, 525I,M20B25,M20B25M
30
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
6BMW Cylinders (cont.)
BMW 2.5 152 M50 325I 91-95 M50
1.8898-1.8904" (48.001-48.016 MM) 17 FT/LBS, + 70Housing Bore Size: Torque:
Pin Bore I.D.: .9449-.9461" (24.-24.031 MM) Pin Type: LOCK
Finish Bushing I.D.: .8663-.8665" (22.004-22.009 MM)
Casting Numbers: 1717085
Comments: DOHC, MFI, 325I, 325IC, 325IS, 525I
BMW 2.7 164 325E 82-89
1.8898-1.8904" (48.001-48.016 MM) 15 FT/LBS, + 70Housing Bore Size: Torque:
Center to Center: 5.243" (133.172 MM)
Pin Bore I.D.: .9420-.9430" (23.927-23.952 MM) Pin Type: FLOAT
Finish Bushing I.D.: .8660-.8664" (21.996-22.007 MM)
Casting Numbers: 1278848
Comments: MFI, 325E, 528E, M20B77
BMW 2.8 170 M30 528I 79-81
2.0472-2.0478" (51.999-52.014 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Comments: MFI, 528I
BMW 2.8 170 M52 328I 97-00 M52
1.8898-1.8904" (48.001-48.016 MM) 17 FT/LBS, +70 USE NEW BOLTSHousing Bore Size: Torque:
Finish Bushing I.D.: .8663-.8665" (22.004-22.009 MM)
Comments: SFI, M3, Z3,328I,328IS,528I,Z3 M SERIES,323I,323IS
BMW 3.0 182 M3 (E36) 95-05 S50
1.8898-1.8904" (48.000-48.016 MM)Housing Bore Size:
Pin Bore I.D.: .9447-.9457" (23.995-24.021 MM)
Finish Bushing I.D.: .8663-.8665" (22.005-22.010 MM)
Comments: DOHC. M3 (E36). 2990CC, S50
BMW 3.0 182 M30 530I 75-78
2.0472-2.0476" (51.999-52.009 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Comments: 530I, 630CSI, EFI
BMW 3.0 182 M30 530I 77-78
2.0472-2.0476" (51.999-52.009 MM)Housing Bore Size:
Comments: 530I, 630CSI, EFI
BMW 3.2 195 S52 328I 97-02 S52
1.8898-1.8904" (48.001-48.016 MM) 17 FT/LBS, +70, USE NEW BOLTSHousing Bore Size: Torque:
Pin Bore I.D.: .9447-.9457" (23.995-24.021 MM)
Finish Bushing I.D.: .8663-.8665" (22.005-22.010 MM)
Comments: M3, Z3,328I,328IS,528I,Z3 M SERIES,323I,323IS
BMW 3.2 196 M30B 81-84
2.0472-2.0479" (51.999-52.017 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Comments: GAS, M30B32, MFI
BMW 3.2 196 M69 528I 78-80
2.0472-2.0479" (51.999-52.017 MM) 38-42 FT/LBSHousing Bore Size: Torque:
Comments: EFI, 528I
BMW 3.4 209 M30B 535I 87-93
2.0472-2.0479" (51.999-52.017 MM) 38-42 FT/LBSHousing Bore Size: Torque:
Pin Bore I.D.: .9472-.9488" (24.059-24.1 MM)
Finish Bushing I.D.: .8662-.8664" (22.001-22.007 MM)
Comments: SOHC, 535I, 735I, M30B35MZ, MFI
BMW 3.4 209 M30B 735I 85-88
2.0472-2.0479" (51.999-52.017 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Pin Bore I.D.: .9472-.9488" (24.059-24.1 MM)
Finish Bushing I.D.: .8662-.8664" (22.001-22.007 MM)
Comments: 735I, M30B34, MFI
BMW 3.5 211 S38Z 535I 87-88
2.0472-2.0479" (52.000-52.016 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Pin Bore I.D.: .9449-.9457" (24.000-24.021 MM)
Finish Bushing I.D.: .8669-.8671" (22.020-22.024 MM)
Comments: DOHC, MFI, 16 VALVE HEAD, *ALSO 1991, 535I
31
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
6BMW Cylinders (cont.)
BMW 3.5 211 S38Z 89-91
2.0472-2.0479" (51.999-52.017 MM) 38-41 FT/LBSHousing Bore Size: Torque:
Finish Bushing I.D.: .8861-.8862" (22.507-22.509 MM)
Notes: OIL HOLE IN ROD SMALL END ASSEMBLED-FRONT OF ENGINE
Comments: DOHC, MFI, 24 VALVE HEAD
8BMW Cylinders
BMW 3.0 183 M60 530I 94-95
1.8901-1.8904" (48.009-48.016 MM) 45 INCH/LBS, +20, +80Housing Bore Size: Torque:
Pin Bore I.D.: .9449-.9457" (24.-24.021 MM)
Finish Bushing I.D.: .8662-.8664" (22.001-22.007 MM)
Comments: PFI, 530I
BMW 4.0 242 M60 540I 94-95
42 INCH/LBS, + 20, + 80Torque:
Comments: 540I, 740I, 740IL
BMW 4.4 268 M62 540I 97-99
2.0472-2.0477" (52.000-52.013 MM) 15 FT/LBS, +80^ USE NEW BOLTSHousing Bore Size: Torque:
Pin Bore I.D.: .9092-.9457" (23.095-24.021 MM)
Finish Bushing I.D.: .8663-.8666" (22.005-22.012 MM)
Comments: SFI, 540I, 840CI, 740I, 740IL
12BMW Cylinders
BMW 5.0 304 M70 750 88-92
7,22 FT/LBS, + 60Torque:
Comments: MFI, 850I
1BUDA Cylinder
BUDA 0.6 38 1BD38 1BD38
2.1600-2.1605" (54.864-54.877 MM) 50-60 FT/LBSHousing Bore Size: Torque:
Comments: 1BD38
4BUDA Cylinders
BUDA 2.5 153
2.1600-2.1605" (54.864-54.877 MM) * 40-45 FT/LBSHousing Bore Size: Torque:
Center to Center: 7.373-7.377" (187.274-187.376 MM)
Casting Numbers: 4500141, B5708
Notes: * MILITARY STANDARD: 2.2495-2.2500
Comments: DIESEL
BUDA 2.9 175 BD 4BD175 4BD175
2.1600-2.1605" (54.864-54.877 MM) 50-60 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4500141
Notes: ENGINE CODE: 4BD175
Comments: 4BD175
BUDA 2.9 175 D
2.1600-2.1605" (54.864-54.877 MM) 50-60 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4500141
BUDA 3.0 182
2.1600-2.1605" (54.864-54.877 MM) 50-60 FT/LBSHousing Bore Size: Torque:
BUDA 3.0 182 BD 4BD182 4BD182
2.1600-2.1605" (54.864-54.877 MM) 50-60 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4500141, B5708
Comments: 4BD182
BUDA 5.6 344
3.0250-3.0255" (76.835-76.848 MM) 120-130 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4349339
BUDA 5.7 344 HD-6 HD-6
3.0250-3.0255" (76.835-76.848 MM) 120-130 FT/LBSHousing Bore Size: Torque:
Comments: HD-6
32
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
6BUDA Cylinders
BUDA 0.0 0 K
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 0.0 0 KM
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 0.0 0 L
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 0.0 0 LM
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 3.8 230
2.1600-2.1605" (54.864-54.877 MM) 50-65 FT/LBSHousing Bore Size: Torque:
Center to Center: 7.373-7.377" (187.274-187.376 MM)
Pin Bore I.D.: 1.1240-1.1250" (28.55-28.575 MM) Pin Type: FLOAT
Finish Bushing I.D.: .9999-1.0004" (25.397-25.41 MM)
Pin Diameter: .9996-.9998" (25.39-25.395 MM)
Casting Numbers: 4500141
BUDA 4.3 262 D DD262 DD262
2.1600-2.1605" (54.864-54.877 MM) 55 FT/LBSHousing Bore Size: Torque:
Pin Type: FLOAT
Pin Diameter: .9995-.9997" (25.387-25.392 MM)
Comments: DD262, 6DA262
BUDA 4.5 273
2.1600-2.1605" (54.864-54.877 MM) 50-60 FT/LBSHousing Bore Size: Torque:
BUDA 4.6 279
2.2705-2.2710" (57.671-57.683 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Center to Center: 9.500" (241.3 MM)
Casting Numbers: 1251, 1260, 1266
BUDA 4.8 294
3.4368-3.4370" (87.295-87.3 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Center to Center: 9.500" (241.3 MM)
Casting Numbers: 1251, 1260, 1266
BUDA 5.2 317
3.4368-3.4370" (87.295-87.3 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Center to Center: 9.500" (241.3 MM)
Casting Numbers: 1251, 1260, 1266
BUDA 5.3 325
3.4368-3.4370" (87.295-87.3 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Center to Center: 9.500" (241.3 MM)
Casting Numbers: 1251, 1260, 1266
BUDA 5.3 325 K
3.4368-3.4370" (87.295-87.3 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Center to Center: 9.500" (241.3 MM)
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 5.5 336 K
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 5.8 358 K
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 6.0 369 K
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 6.2 381 K
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
33
Connecting Rod Application Section
Make Liter CID Vin Model Year Engine Model
6BUDA Cylinders (cont.)
BUDA 6.4 393 K
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 6.4 393 KM
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 6.6 404 K
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 6.6 404 KM
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 6.8 415 DR
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 6.8 415 LD
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 7.0 428 K
3.4375-3.4382" (87.313-87.33 MM) 75-85 FT/LBSHousing Bore Size: Torque:
Casting Numbers: 4250, 4251, 4260, 4263C, 4379, 5130, 5159, 5160, 5163
BUDA 7.4 451 L
3.4375-3.4382" (87.313-87.33 MM) 75-85 F