AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478, [email protected]) (Mike Gutridge, +1 740 587 9841, [email protected]) The Aerospace Quality Systems Task Group is conducting audits to demonstrate compliance to the PRI AC7004. This quality system audit is required where no existing quality system approval exists in accordance with the Nadcap Operating Procedure NOP-002. TASK GROUP VOTING MEMBERS Subscriber Voting Members Patrice Bleau Bombardier, Inc. UVM Robert Bodemuller Ball Aerospace & Technologies UVM Robin Borrelli The Boeing Company CHR/UVM (Chair – October 2012) David Day GE Aviation UVM Warren Ferree 309th Maintenance Wing-Hill AFB UVM Harold Finch Spirit AeroSystems, Inc. VCH/UVM M’Hamed El Haouari Bombardier, Inc ALT/UVM Keith Kastner Cessna Aircraft Company UVM Angelina Mendoza Goodrich (UTAS) UVM Earl Pruett Lockheed Martin Corp. UVM Dave Vaughn Spirit AeroSystems Inc ALT/UVM Patricia Wesemann The Boeing Company ALT/UVM George Winchester Northrop Grumman Corporation UVM Supplier Voting Members Mark Brown Kaman Aerospace Corp - Jacksonville SVM Debra Maier Alliant ATK Aerospace SVM Jim Tuminello Tech Met SVM 17
The Aerospace Quality Systems Task Group is conducting audits to demonstrate compliance to the PRI AC7004. This quality system audit is required where no existing quality system approval exists in accordance with the Nadcap Operating Procedure NOP-002.
TASK GROUP VOTING MEMBERS Subscriber Voting Members Patrice Bleau Bombardier, Inc. UVM Robert Bodemuller Ball Aerospace & Technologies UVM Robin Borrelli The Boeing Company CHR/UVM (Chair – October 2012) David Day GE Aviation UVM Warren Ferree 309th Maintenance Wing-Hill AFB UVM
Harold Finch Spirit AeroSystems, Inc. VCH/UVM M’Hamed El Haouari Bombardier, Inc ALT/UVM Keith Kastner Cessna Aircraft Company UVM Angelina Mendoza Goodrich (UTAS) UVM
Earl Pruett Lockheed Martin Corp. UVM Dave Vaughn Spirit AeroSystems Inc ALT/UVM Patricia Wesemann The Boeing Company ALT/UVM George Winchester Northrop Grumman Corporation UVM
Supplier Voting Members Mark Brown Kaman Aerospace Corp - Jacksonville SVM
Robin Borelli The Boeing Company COMP Task Group Bruce Brownfield Lockheed Martin Corp. HT Task Group Mike Coleman The Boeing Company CP Task Group David Day GE Aviation CMSP Task Group
Joel Mohnacky Hamilton Sundstrand (UTAS) CT Task Group Earl Pruett Lockheed Martin WLD Task Group Pete Torelli The Boeing Company NDT Task Group Barbara Waller Raytheon ETG Task Group
The Chemical Processing Task Group is conducting audits to demonstrate compliance to the AC7108 series of documents. These audits address the following types of processes: • Anodizing • Chemical Cleaning • Chemical Milling • Conversion/Phosphate Coating
• Stripping • Surface Prep Prior to Metal Bond • Surface Treatment/Passivation • Vacuum Cadmium & Aluminium IVD
TASK GROUP VOTING MEMBERS
Subscriber Voting Members Hal Abel Raytheon Co. UVM Cary Baker The Boeing Company ALT/UVM Malik Boutoba Eurocopter UVM Craig Bowden BAE Systems – MAI ALT/UVM Bob Cashman Parker Aerospace Group UVM Jim Chan Honeywell Aerospace UVM Michael Coleman The Boeing Company ALT/UVM Terry Curtland Ball Aerospace & Technologies UVM Karyn Deming Goodrich (UTAS) VCH/UVM Bob Denney Honeywell Aerospace ALT/UVM Peter Droste Airbus UVM Robert Faticanti Textron Systems UVM Aleck Featherston Jr. Bell Helicopter Textron UVM Sylvia Franklin The Boeing Company ALT/UVM
Laurent Geerts Sonaca UVM Alan Gilbert Cessna Aircraft Company UVM Greg Haataja Bell Helicopter Textron ALT/UVM Gerald Harvey Triumph AeroStructures - VAD ALT/UVM John Koenig The Boeing Company UVM Bob Koukol Honeywell Aerospace ALT/UVM Serge Labbe Heroux Devtek Inc. UVM Marc-Andre Lefebvre Heroux Devtek Inc. ALT/UVM Nathalie Le Pottier Eurocopter ALT/UVM Susan Lewis Lockheed Martin Corporation UVM Mihaela Lupu SAFRAN Group ALT/UVM Nick Magnapera BAE Systems – E & I ALT/UVM Veronique Marcel SAFRAN Group UVM Angelina Mendoza Goodrich (UTAS) ALT/UVM
Tom Moreland Bombardier Inc. UVM Raj Nagarajan General Dynamics Corp. UVM Jerker Nordh GKN Aerospace Sweden AB UVM Jim O’Shea GE Aviation ALT/UVM Eric T. Oswald Raytheon Co. ALT/UVM Fabrizio Quadrini AgustaWestland UVM Muralikrishnan Ramalingam GE Aviation UVM Richard Shain General Dynamics Corp. ALT/UVM Chris Reilly Hamilton Sundstrand (UTAS) UVM Josefa Rodriguez Baena Airbus Military / EADS CASA UVM Corazon Santos The Boeing Company ALT/UVM Jerry Satchwell Rolls-Royce CHR/UVM (Chair – February 2010) Paul Slater Rockwell Collins Inc. UVM
Steve Starr Honeywell Aerospace UVM Mike Stolze Northrop Grumman Corporation UVM Yuhui Sun COMAC UVM Zia Usmani BAE Systems - MAI UVM Shawn Vierthaler Spirit AeroSystems Inc. UVM Debbie Vogel Triumph Aerostructures - VAD ALT/UVM Michael Vosatka Rockwell Collins Inc. ALT/UVM Gene Wallace Triumph Aerostructures – VAD Fort Worth UVM Miao Wang COMAC ALT/UVM Wei Wang COMAC ALT/UVM Sergey Yesilevich Hamilton Sundstrand (UTAS) UVM CHEMICAL PROCESSING continued on next page
TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Mark Airey Robert Stuart Ltd. ALT/SVM Daniel Backus Har-Conn Chrome Co. SVM Phillip Bratton Hohman Plating & Mfg Inc. SVM Lee Bruce Robert Stuart Ltd. SVM Larry Carlson PPI Aerospace SVM John Carpenter U.S. Chrome Corp. of Connecticut SVM Stephane Chaumeil Galion SVM Steve Crest Stabile Plating SVM Jim Cummings Metal Finishing Co. SVM Robert Custer AAA Plating & Inspection Inc. SVM Warren DeCuir Lisi Aerospace Torrance ALT/SVM Jorge DellaCosta Chrome Plus International ALT/SVM Bob Denton B-D Industries Inc. ALT/SVM Jim Denton B-D Industries Inc. SVM Scott Fabiano Imagineering Finishing Technologies SVM
William Ferris TechMetals Inc. SVM Ben Flores Applied Aerospace Structures Corp. SVM Gary Fox Anodyne, Inc. SVM Ron Franklin ChemResearch Co. Inc. SVM Alex French Aerofin Laboratories Ltd. ALT/UVM Paul French Aerofin Laboratories Ltd. SVM Sarah Fuqua Kearfott Corporation – Motion System Division SVM Jonathan Hebben Ducommun Inc. SVM Bill Heeter Skills Inc. SVM Eric Jacklin F.M. Callahan & Son Inc. SVM David Jones Nex-Tech SVM Richard Kline X-R-I Testing SVM Keven Kudelka Westfield Electroplating Co. SVM Jeff Logan Saporito Finishing Company ALT/SVM Julie Mahan Unison Engine Components - Terre Haute SVM
Rosa Martin Superior Plating Inc. SVM David Michaud Fountain Plating Co. SVM William Miller Hohman Plating & Mfg. Inc. ALT/SVM Abdillah Mohamad Lord Corporation SVM Laura Moyer Howmet Castings and Services, Inc. Dover Casting (AHDC) SVM Simone Murphy-Fickenworth Chrome Plus International SVM Abdul Nathani Hi-Tech Metal Finishing ALT/SVM Mike Noettl Magnetic Inspection Laboratory Inc. SVM Patrick O’Leary Nu-Pro Limited SVM Gregory Penny Triumph Processing, Embee Division, Inc. SVM Kim Porter Poly-Metal Finishing SVM Dennis Reidy CIL / Adtec SVM Jim Ringer Tech Met SVM Cynthia Roth Team Industrial Services TCM Division SVM Gardiner Rynne Chem Processing Inc SVM
Guy Saenz Hi-Tech Metal Finishing SVM Tammi Schubert LMI Finishing Inc. SVM David Serbousek Olympic Scientific Inc. SVM Ken Shouse Lord Corporation ALT/SVM Steve Simacek Hytek Finishes Company SVM Greg Smotherman Jr. Ozark Mountain Technologies LLC SVM Vittorio Stana Avcorp Industries Inc. SVM Milt Stevenson Anoplate Corp. SVM Steve Stone Saporito Finishing Company SVM Yoshiomi Sukesada Asahi Kinzoku Kogyo Inc. SVM Mitchell Tanner Triumph Processing, Embee Division, Inc. ALT/UVM Jim Tuminello Tech Met ALT/SVM
The Coatings Task Group is conducting audits to demonstrate compliance to the PRI AC7109 series of standards. These documents contain the Nadcap requirements for the following: • Thermal Spray • Vapor Deposited Coatings • Diffusion Coating Processes • Stripping of Coating Materials
• Coating Evaluation • Plating of Coated Parts • Heat Treating of Coated Parts
TASK GROUP VOTING MEMBERS
Subscriber Voting Members Nicolas Barthelemy Eurocopter UVM Fabrice Crabos SAFRAN Group (Turbomeca) UVM James Dunn GE Aviation ALT/UVM Ben Evans Goodrich (UTAS) UVM Jon Higgins Rolls-Royce ALT/UVM Karen Kim Pratt & Whitney UVM
Erkan Kilic GE Aviation ALT/UVM Dan Loveless Parker Aerospace UVM Joel Mohnacky Hamilton Sunstrand UVM Francis Monerie-Moulin SAFRAN Group ALT/UVM John Nerz GE Aviation UVM Tim Pruitt Rolls-Royce CHR/UVM (Chair – July 2011) +1 317 230 3728
Jack Saunders Honeywell Aerospace ALT/UVM Udo Schuelke Honeywell Aerospace UVM Jan Wigren GKN Aerospace Sweden AB VCH/UVM Deborah Vogel Triumph Aerostructures – VAD UVM
Supplier Voting Members Brent Bartlett Sulzer Metco Canada Inc. SVM Dale Harmon Cincinnati Thermal Spray SEC/SVM
John Passmore St. Louis Metallizing SVM Steve Payne Praxair Surface Technologies SVM
Ronald Stewart Ellison Surface Technologies SVM Vern Talmadge Howmet Thermatech Coatings SVM
The Composites Task Group is conducting audits to demonstrate compliance to the PRI AC7118. These audits address the Nadcap requirements for the following processes: • CMP – Compression Molding • CP – Core Processing • LRP – Liquid Resin Processing
• MB – Metal Bonding • PAR – Prepeg/Adhesive Bonding/Resin Film
Infusion TASK GROUP VOTING MEMBERS
Subscriber Voting Members Monica Alcala Honeywell Aerospace UVM Peter Atwell AIRBUS SEC/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group UVM Elmer Cardwell General Dynamics Corp UVM Ping Chen COMAC UVM Claude Chevalier SAFRAN Group ALT/UVM Ray Cleghorn The Boeing Company ALT/UVM David Constable AIRBUS ALT/UVM Lucia Cutillo Alenia Aermacchi S.p.A UVM Laurent DeJaie Sonaca ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM
Patrick Dunleavy SAFRAN Group ALT/UVM Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Eurocopter UVM Olivier Goupillon Eurocopter ALT/UVM Steve Grunshaw BAE Systems – Military & Air Information (MAI) ALT/UVM Richard Hammond The Boeing Company ALT/UVM Brett Hemingway BAE Systems – Military & Air Information (MAI) UVM Mark Jackson Triumph Group, Inc. UVM Mike Kahler Ball Aerospace & Technologies UVM John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace ALT/UVM Eric LeFort Sonaca UVM
Herman Leibovich Israel Aerospace Industries UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM William Macias Goodrich (UTAS) ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Angelina Mendoza Goodrich (UTAS) ALT/UVM Larry Olsen Northrop Grumman Corp. UVM Rick Ouellette The Boeing Company ALT/UVM Keith Panuska Lockheed Martin VCH/UVM Jeremy Phillips Cessna Aircraft Co. UVM Alberto Portal Airbus Military / EADS CASA UVM Ross Smelser General Dynamics Corp ALT/UVM
Sally Spindor Triumph Group Inc. ALT/UVM Kenneth Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier, Inc. UVM Colin Stuart Rolls-Royce UVM Frank Thomas Bombardier, Inc. ALT/UVM Justin Walker Spirit AeroSystems ALT/UVM Yuan Yuhui COMAC ALT/UVM Composites continued on next page
Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Kevin Brennan Swift Engineering, Inc. SVM Jim Brown Hexcel Composites SVM Doyle Butler Albany Engineered Composites Inc. SVM Gordon Cameron Integrated Technologies Inc. SVM Pierangelo Campagna EXOVA (UK) Limited SVM
Patrick Durkin TE Wire Liaison Ben Flores Applied Aerospace Structures ALT/SVM Mike Guthmiller Applied Aerospace Structures SVM Rick Heise Swift Engineering, Inc. ALT/SVM Hubert Kern FACC AG SVM Tommie Lakes GKN Aerospace SVM
Breton Lutz DuPont Vespel Parts & Shapes SVM Debra Maier ATK Space Systems – Clearfield SVM David Scott Hitco Carbon Composites SVM Kevin Snyder Composite Horizons SVM Vitorio Stana Avcorp Industries Inc. SVM Arno Toelkes Euro-Composites SVM
23
CONVENTIONAL MACHINING AS A SPECIAL PROCESS (CMSP)
(Andy Statham +44 133 286 9276, [email protected]) The Conventional Machining as a Special Process (CMSP) Task Group is conducting audits to demonstrate compliance to the AC7126 series of checklists for conventional machining as a special process. These audits address the following types of processes:
• Holemaking • Turning • Grinding
• Broaching • Milling • Edge Treatment
TASK GROUP VOTING MEMBERS Subscriber Voting Members Ken Abram Honeywell Aerospace CHR/UVM (Chair – October 2011) Ertem Aygin GE Aviation ALT/UVM Zeljko Calija Goodrich (UTAS) UVM Marco Cherubini Avio UVM
Philippe Durand Eurocopter UVM Vincent Dutilh SAFRAN Group UVM Wayne Hillstead 309th Maintenance Wing-Hill AFB UVM Scott Maitland Goodrich (UTAS) ALT/UVM
John Pfeiffer GE Aviation SEC/UVM Alex Pohoata Honeywell Aerospace ALT/UVM Douglas Webb Honeywell Aerospace ALT/UVM
Supplier Voting Members Tim Crowe Hunting Dearborn Inc. SVM Brad Gould Hunting Dearborn Inc. ALT/SVM
James Jensen Moeller Manufacturing Co SVM Karsten Riemer Aerotech Peissenberg GmbH SVM
The Elastomer Seals Task Group is conducting product audits to demonstrate compliance to AC7115. Audit elements include: O-rings, plate seals / rubber bonded to substrates, molded shapes, compounding & compression seals.
TASK GROUP VOTING MEMBERS Subscriber Voting Members Michelle Brunet The Boeing Company UVM Brent Clothier Cessna Aircraft Company UVM Kent DeFranco Lockheed Martin Corporation UVM Marc Gage Hamilton Sundstrand (UTAS) UVM David Grulke Hamilton Sundstrand (UTAS) ALT/UVM
Jeffrey Kingsley Air Force UVM/GVT Manuel Koucouthakis Honeywell Aerospace CHR/UVM (Chair – October 2005) Benjamin Shaw Rolls-Royce UVM Bob Teegarden Honeywell Aerospace ALT/UVM Estrella Watson Goodrich (UTAS) VCH/UVM
Supplier Voting Members Peter Holden Precision Polymer Engineering Ltd. SVM John Hudspeth International Seal SVM
The Electronics Task Group is conducting electronics audits to demonstrate compliance to AC7119 Printed Boards, AC7120 Circuit Card Assemblies, and AC7121 Cable and Harness Assemblies.
TASK GROUP VOTING MEMBERS
Subscriber Voting Members Roger Bloomfield Goodrich (UTAS) ALT/UVM William Cardinal Hamilton Sundstrand (UTAS) UVM Frank Cristofol BAE Systems Inc. UVM Roy Garside Rolls-Royce UVM Jerome Hery SAFRAN Group ALT/UVM
Eric Lacourt Thales UVM Philippe Larivee Thales ALT/UVM Nathalie LeFevre SAFRAN Group UVM John Mastorides Honeywell Aerospace ALT/UVM/SEC Scott Meyer Goodrich (UTAS) CHR/UVM (Chair-February 2012)
Norberto Roiz-Lafuente Airbus Military / EADS CASA UVM Richard Rumas Honeywell Aerospace UVM/VCH Magali Vigier Airbus UVM Barbara Waller Raytheon Co UVM
Supplier Voting Members Cristiano Bazzi Somacis SpA SVM Paul Comer Graphic Plc SVM Ian Hopps Ultra Electronics SVM Donna Lopez Cristek Interconnects, Inc SVM Ishwar Mathur IEC Electronics Corp. - Newark SVM
Jeremy Needs Ultra Electronics ALT/SVM Mark Northrup IEC Electronics Corp. – Albuquerque SVM Denise Ryves STS Defence SVM Douglas Schueller AbelConn LLC SVM
Juan Vasquez Viasystems North American Operations SVM Tim Voeller Logic PD, Inc SVM Jennifer Wagner Ducommun LaBarge Tech SVM
26
FLUID DISTRIBUTION SYSTEMS (FLU) (Keith Purnell +1 724 772 8685, [email protected])
The Fluid Distribution Standards Task Group is conducting product audits to demonstrate compliance to AC7112, AC7112/1, AC7112/2, AC7112/3, AC7112/4, AC7112/6 and AC7123. These audits address the following: • Hose Manufacturing • Fittings & Other Machined Components • Couplings
Subscriber Voting Members Keith Allen Rolls-Royce PLC ALT/UVM James Barnett Rolls-Royce Corp ALT/UVM Joe Bebey The Boeing Company ALT/UVM Samuel Buri The Boeing Company VCH/UVM
Terence Chin NAVAIR UVM/GVT Erwin Oman Bombardier UVM Mark Paul Rolls-Royce UVM Robert Schreiber The Boeing Company CHR/UVM (Chair – September 2008) +1 610 591 7660
Mark Scott The Boeing Company UVM Dan Smith GE Aviation UVM
Supplier Voting Members Mark Scatoloni Faber Enterprises Inc SVM Michael Schleckman Voss Industries SVM
Chris Schofield Hydraflow SVM Phillip Wade Smiths Tubular Systems - Laconia SVM
The Heat Treating Task Group has developed AC7102 requirements and checklists that include the following: • Metal Systems – Carbon & Alloy Steels, Stainless Steel, pH Stainless Steels, Cast Iron, Aluminum Alloys, Titanium Alloys, Heat
Resisting Alloys, Magnesium, Other Nonferrous Metals • Heat Treating Process – Normalizing, Annealing, Hardening and Tempering, Solution Heat Treating, Aging, Carburizing, Nitriding,
Stress Relieving, Vacuum Brazing, Induction Hardening • Heat Treating Equipment – Furnace, Pyrometry, Instrumentation, Atmospheric Control System • Brazing
TASK GROUP VOTING MEMBERS Subscriber Voting Members Pedro Aranda Eaton Aerospace UVM Silvia Baeza Triumph Group, Inc. ALT/UVM Shaun Brewin Rolls-Royce ALT/UVM Bruce Brownfield Lockheed Martin Corp. SEC/UVM Frank Brungs MTU Aero Engines GmbH UVM Cedric Colas SAFRAN Group ALT/UVM Michael Corsino Hamilton Sundstrand (UTAS) UVM Bernd Daniels MTU Aero Engines GmbH ALT/UVM Martin Day Honeywell Aerospace UVM Peter Edwards Airbus ALT/UVM Andreas Elbs Liebherr-Aerospace SAS UVM Mark Emerson Rolls-Royce UVM Sergio Esposito Alenia Aermacchi S.p.A UVM
Robert Faticanti Textron Systems UVM Laurent Geerts SONACA UVM Cristina Gonzalez-Perez Airbus Military / EADS CASA UVM Peter Hammarbo GKN Aerospace Sweden AB UVM Gerald Harvey Triumph Group, Inc. UVM Wayne Hillstead 309th Maintenance Wing-Hill AFB ALT/UVM Andrew Hopkins BAE Systems (MAI) UVM Billy Hulse Spirit AeroSystems Inc UVM David Isenberg Parker Aerospace Group UVM Kent Johnson 309th Maintenance Wing-Hill AFB ALT/UVM Jeff Koss The Boeing Company ALT/UVM Serge Labbe Heroux Devtek Inc. ALT/UVM Marc-Andre Lefebvre Heroux Devtek Inc. UVM
Stefan Lemberger Eurocopter ALT/UVM Hongping Li COMAC ALT/UVM Weitao Ma COMAC UVM William Macias Goodrich (UTAS) ALT/UVM Doug Matson The Boeing Company UVM John Merritt Sikorsky Aircraft UVM Thomas Norris Goodrich (UTAS) CHR/UVM (Chair- October 2012) +1 858-436-5443 Eddy Pham Northrop Grumman Corporation UVM Frabrizio Quadrini AgustaWestland UVM Sunder Rajan Raytheon Co UVM Chris Reilly Hamilton Sundstrand (UTAS) ALT/UVM Alex Richez Airbus UVM Simon Scott BAE Systems (MAI) ALT/UVM
Mike Shen Honeywell Aerospace ALT/UVM Gary Sigmon 309th Maintenance Wing-Hill AFB UVM William Stewart Bombardier Inc. UVM Marc Taillandier Eurocopter UVM Jeff Thyssen GE Aviation UVM Louis Tremblay Bombardier Inc. ALT/UVM Cyril Vernault SAFRAN Group VCH/UVM Tom Wilson Bombardier Inc. ALT/UVM Grzegorz Wryk Rolls-Royce (AEC) ALT/UVM Ji Yuan COMAC ALT/UVM HEAT TREATING continued on next page
Supplier Voting Members Griff Braddock Braddock Metallurgical Inc SVM Michael Brandt Alcoa Inc. SVM Mark Brown Kaman Aerospace Corp SVM Robert Cvetichan Paulo Products Company (American Brazing Division) SVM Edward Engelhard Solar Atmospheres, Inc. SVM Dennis Fried Carpenter Technology SVM
Tom Glosser Astro Aluminum Treating SVM Alexander Klyuch Blades Technology Ltd SVM John Kunkle Alcoa Inc. SVM Bob Lehnen Bodycote Thermal Processing SVM Johanna Lisa Valley Metal Treating SVM Vincent Musa Technetics Group Columbia SVM
Michael Niedzinski Constellium France SVM Daniel Reeves Consolidated Foundries Inc SVM Stuart Sherman Metallurgical Processing Inc. SVM Jeffrey Sipf Haynes International SVM
This task group has published the checklists (AC7101, AC7101/1-9, AC7101/11, & AC7006) for Materials Testing Laboratories. Types of activities being accredited: • ISO/IEC 17025 Requirements • Chemical Testing • Mechanical Testing
Subscriber Voting Members Pietro Bonarrigo Bombardier Inc. UVM Thomas Brendel MTU Aero Engines GmbH ALT/UVM Robert Clark Eaton Aerospace UVM Linda Cook Rolls-Royce ALT/UVM George Coste SAFRAN Group ALT/UVM Doug Deaton GE Aviation UVM Uta Dietrich AIRBUS ALT/UVM George Doviak Goodrich (UTAS) UVM Kevin Elston Spirit AeroSystems UVM Colin Fletcher Bell Helicopter Textron UVM
John Haddock BAE Systems Military Air & Information [MAI] UVM Jim Hartman Honeywell Aerospace ALT/UVM Keith Kastner Cessna Aircraft Company ALT/UVM John Knie The Boeing Company ALT/UVM Frank Lennert The Boeing Company UVM Muriel Malhomme Airbus UVM Patricia Matkowski The Boeing Company ALT/UVM Jennifer McKeegan Cessna Aircraft Company UVM Olivier Molinas Eurocopter UVM
Tim Myers Honeywell Aerospace CHR/UVM (Chair – October 2011) +1 602 284 5637 [email protected] Burcu Okur Duransoy GE Aviation ALT/UVM Amanda Rickman Raytheon Co. VCH/SEC/UVM Lindsay Schurle Spirit Aerosystems ALT/UVM Christian Schwaminger MTU Aero Engines GmbH UVM Armen Talverdian The Boeing Company ALT/UVM Gary Winters Northrop Grumman Corporation UVM Verl Wisehart Rolls-Royce UVM MATERIALS TESTING LABORATORIES continued on next page
TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Siobhan Alekna SPS Technologies SVM Frank Anderson The M&P Lab Inc. SVM Corwyn Berger Exova, Inc. SVM Mary Lee Bogensperger PCC Airfoils LLC SVM Wayne Brege Cannon Muskegon SVM Philip Bretz Metcut Research Associates, Inc. ALT/SVM Matthew Chamberlain-Webber Timet UK Limited SVM John Chir Latrobe Specialty Steel SVM Deena Crossmore IMR Test Labs SVM Bryan Engel Consolidated Precision Products CPP - Syracuse SVM Kay Fisher Bohler Edelstahl GmnH & Co KG SVM
Stephan Greimers Outokumpu VDM GmbH SVM Brian Griffin Howmet Research Corp. SVM Bryan Hall NSL Analytical Services Inc. SVM Anil Joshi Praxair Surface Technologies SVM David Luoni Element Materials Technology SVM Bob Olevson Element Materials Technology ALT/SVM Jacob Padrul Constellium France SVM Frank Peszka Laboratory Testing Inc. SVM Annette O’Connell Haynes International Inc. SVM Pierre-Emmanuel Richy Aubert & Duval SVM James D. Rossi Westmoreland Testing SVM Ray Schiltz AADFW SVM
Dave Serbousek Olympic Scientific, Inc. SVM Byron Skillings ATI Ladish Forging SVM T. Rao Tipirneni Long Island Testing Labs. Inc. SVM Simon Tournebize Aubert & Duval ALT/SVM Jennifer Tret Sherry Laboratories of Indiana LLC SVM Jeff Viney Metcut Research Associates, Inc. SVM Kevin VonScio Perryman Company SVM Margaret Willis ATI Allvac Monroe SVM Jason Wright Atlas Testing Laboratories SVM
TASK GROUP VOTING MEMBERS Subscriber Voting Members Phil Bamforth Rolls-Royce ALT/UVM Lance Christie Sikorsky Aircraft UVM Mark Clark The Boeing Company UVM Greg Goldhagen Hamilton Sundstrand (UTAS) UVM Simon Gough-Rundle Rolls-Royce CHR/UVM (Chair- June 2013) +44 1332 291936
Jacques Kerault Airbus UVM Cyril Lerebours SAFRAN Group UVM Mark Rechtsteiner GE Aviation UVM Steve Row Goodrich (UTAS) UVM
Supplier Voting Members Brad Gould Hunting Dearborn SVM
The Nonconventional Machining and Surface Enhancement (NMSE) Task Group is conducting audits to demonstrate compliance to the AC7116 series of checklists for nonconventional machining and the AC7117 checklist for surface enhancement. These audits address the following types of processes: Nonconventional Machining • Electrochemical Machining • Electrochemical Grinding
TASK GROUP VOTING MEMBERS Nonconventional Machining Sub-Task Group
Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM Zeljko Calija Goodrich (UTAS) UVM Tara Campbell Rolls Royce ALT/UVM Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM Peter Edwards Airbus ALT/UVM Simon Long Airbus UVM Dan Loveless Parker Aerospace UVM
David McCallister UTC/Pratt & Whitney SEC/UVM Gudrun Muehlbauer MTU Aero Engines GmbH UVM John Pfeiffer GE Aviation ALT/UVM Jeremy Phillips Cessna Aircraft Co. ALT/UVM Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 231 4134 Holger Polanetzki MTU Aero Engines GmbH ALT/UVM
Jeffrey Robb Cessna Aircraft Co. UVM Mike Schmidt GE Aviation ALT/UVm Greg Syvertson Bell Helicopter Textron UVM Donald Williams GE Aviation UVM Paul Woolley Rolls-Royce VCH/UVM Evren Yuksekkaya GE Aviation ALT/UVM
Supplier Voting Members Jeffrey Kupis Micro-Tronics, Inc. SVM
Tim Scarlett Danville Metal Stamping Co., Inc. SVM
Mark Singer Kessington Machine SVM NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT continued on next page
Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM Silvia Baeza Triumph Group Inc. UVM Zeljko Calija Goodrich (UTAS) UVM Tara Campbell Rolls Royce ALT/UVM Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM Peter Edwards Airbus ALT/UVM Cristina Gonzalez-Perez Airbus Military / EADS CASA UVM Glen Heide The Boeing Company ALT/UVM Serge Labbe Heroux Devtek ALT/UVM
Marc Andre-LeFebvre Heroux Devtek UVM Simon Long Airbus UVM Dan Loveless Parker Aerospace UVM David McCallister UTC/Pratt & Whitney SEC/UVM Gudrun Muehlbauer MTU Aero Engines GmbH UVM John Pfeiffer GE Aviation ALT/UVM Jeremy Phillips Cessna Aircraft Co. ALT/UVM Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 231 4134
Holger Polanetzki MTU Aero Engines GmbH ALT/UVM K. T. Quader The Boeing Company UVM Jeffrey Robb Cessna Aircraft Co. ALT/UVM Mike Schmidt GE Aviation UVM Kenneth Sposato Triumph Aerostructures – VAD ALT/UVM Greg Syvertson Bell Helicopter Textron UVM Donald Williams GE Aviation ALT/UVM Paul Woolley Rolls-Royce VCH/UVM Evren Yuksekkaya GE Aviation ALT/UVM
Supplier Voting Members Steve Connally Curtiss Wright Surface Technologies SVM Dave Jones 3P Processing, Inc. SVM
Dawn Stokes PTI Industries Inc. SVM Yoshiomi Sukesada Asahi Kinzoku Kogyo Inc. SVM
The Nondestructive Testing Task Group is currently reviewing audit reports and making recommendations to Nadcap Council on accreditation for the following tests: • Magnetic Particle • Liquid Penetrant
• Ultrasonic • Radiography
• Eddy Current • Digital Radiography, Digital Detector
Array (DDA) SurveyTASK GROUP VOTING MEMBERS
Subscriber Voting Members Charles Alvarez Goodrich (UTAS) ALT/UVM Steve Bauer Northrop Grumman Corp. UVM Philippe Beck Eurocopter UVM Mitch Birzer General Dynamics Corp UVM Alain Bouchet SAFRAN Group UVM Juergen Burchards MTU Aero Engines GmbH UVM Manuel Cabrera Jr. The Boeing Company ALT/UVM Fangmei Chu Honeywell Aerospace Phoenix ALT/UVM Mike Clark Sikorsky Aircraft UVM Massimo Colombo Avio UVM Richard Costantino Goodrich (UTAS) UVM Michael Daehling Cessna Aircraft Company ALT/UVM Timothy Doane 309th Maintenance Wing – Hill AFB UVM Chris Dootson BAE Systems – Military & Air Information (MAI) UVM
Roger Eckart Hamilton Sundstrand (UTAS) ALT/UVM Jim Fowler Pratt & Whitney ALT/UVM Steven Garner Eaton Aerospace UVM Jim Graves Rolls-Royce ALT/UVM Luis Grijalva Lockheed Martin Corporation UVM Thomas Mike Guinn Bell Helicopter Textron ALT/UVM Robert Hogan Honeywell Aerospace - Phoenix UVM Ed Hohman Bell Helicopter Textron UVM Scott Iby Hamilton Sundstrand (UTAS) ALT/UVM Dr. Hans-Hermann Kopp MTU Aero Engines ALT/UVM Serge Labbe Heroux Devtek Inc ALT/UVM Marc-André Lefebvre Heroux Devtek Inc ALT/UVM Donald MacLean Raytheon Co UVM Steve McCool Honeywell Aerospace South Bend UVM Phoenix ALT/UVM
Luigi Merletti AgustaWestland UVM Michael Mitchell Hamilton Sundstrand (UTAS) UVM Dale Norwood Parker Aerospace Group UVM Gary O’Neill Parker Aerospace Group ALT/UVM Robert Rainone Goodrich (UTAS) ALT/UVM Robert Reynolds The Boeing Company - BDS ALT/UVM David N. Royce Pratt & Whitney VCH/UVM Victor Schonberger Israel Aerospace Industries ALT/UVM Bobby Scott Bombardier, Inc. CHR/UVM (Chair – October 2012) Uri Sol Israel Aerospace Industries UVM Christopher Stevenson Rolls-Royce UVM Terho Sulkupuro GKN Aerospace Sweden AB UVM D. Scott Sullivan Honeywell Aerospace – Tempe UVM Phoenix ALT/UVM
Pat Thompson Honeywell Aerospace – Torrance UVM Phoenix ALT/UVM Dominique Tomasso SAFRAN Group ALT/UVM Walter Tonizzo Heroux Devtek Inc UVM Peter Torelli The Boeing Company UVM Louis Truckley The Boeing Company ALT/UVM David H. Vaughn Spirit AeroSystems Inc UVM Tony Warren Airbus SEC/UVM Frank Whittaker Spirit AeroSystems Inc ALT/UVM Sean Wood Triumph Group UVM Jingiu Zhou Comac UVM NONDESTRUCTIVE TESTING continued on next page
Supplier Voting Members Christopher Andersen PCC Structurals Inc. LPC SVM Mike Ashton Hexcel Kent SVM Andy Bakewell E. M. Inspection Co Ltd SVM Shawn Ballou Wyman SVM Mario Bianchi BYTEST SRL SVM Martyn Bills Exova (UK) Limited ALT/SVM N. David Campbell West Penn Testing Group SVM Massimo Capriolo BYTEST SRL ALT/SVM Claude Chambon Aubert & Duval SVM
Dwayne Cooper Wyman Gordon SVM Robert Custer AAA Plating & Inspection, Inc. SVM Paul Evans James Fisher IMS Ltd. SVM Richard Gasset LISI Aerospace - Torrance SVM David Gray Mitchell Laboratories Inc SVM Robert Henchar Integrity Aerospace Group SVM Helmuth Hoeller FACC SVM Jeff Jones Alloy Processing Inc SVM Richard King New Hampshire Ball Bearings Inc. SVM
Josef Maier Bohler Edelstahl GmbH & Co KG SVM John Massie TurboCombustor Technology SVM Cory McGraw PM Testing Laboratory Inc. SVM William McKessy Alcoa Howmet SVM David Mitchell Composite Inspection Solutions SVM Blair James O’Connell Precision Castparts Corp SVM Patrick O’Leary Nu-Pro Limited SVM Mark Pompe West Penn Testing Group ALT/SVM
Jonathan Pugh Exova (UK) Limited SVM Steve Radelich Jorgensen Forge SVM Cindy Roth TEAM Industrial Services TCM Division-Cincinnati SVM Guy Saenz Hi-Tech Metal Finishing SVM Michael Steele Northstar Aerospace Chicago Inc. SVM Gary White Orbit Industries Inc SVM Rob Yocom Imagineering Finishing Tech SVM
The Non Metallic Materials Manufacturing Task Group is conducting audits to demonstrate compliance to the PRI AC7124. These audits address the Nadcap requirements for the following processes:
TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM Peter Atwell AIRBUS SEC/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group UVM Ping Chen COMAC UVM Claude Chevalier SAFRAN Group ALT/UVM Ray Cleghorn The Boeing Company ALT/UVM David Constable AIRBUS ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM
Kevin Dowling Spirit AeroSystems UVM Patrick Dunleavy SAFRAN Group ALT/UVM Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Eurocopter UVM Olivier Goupillon Eurocopter ALT/UVM Steve Grunshaw BAE Systems-Military Air Solutions ALT/UVM Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM Mark Jackson Triumph Group Inc. UVM
Mike Kahler Ball Aerospace & Technologies UVM John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Muriel Malhomme AIRBUS ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Keith Panuska Lockheed Martin VCH/UVM
Jeremy Phillips Cessna Aircraft Co. UVM Alberto Portal Airbus Military / EADS CASA UVM Sally Spindor Triumph Group Inc. ALT/UVM Ken Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier, Inc. UVM Colin Stuart Rolls-Royce UVM Justin Walker Spirit AeroSystems ALT/UVM Yuan Yuhui COMAC ALT/UVM
Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Jay Berndt Toray Composites America Inc ALT/SVM Jim Brown Hexcel Composites SVM
Jim Ferrel Cytec Engineered Materials ALT/SVM Rick Price Park Aerospace Technologies Corp ALT/SVM Don Russell Toray Composites America Inc ALT/SVM
Colleen Saunders Toray Composites America Inc SVM Steve Schrameyer Cytec Engineered Materials SVM Vitorio Stana Avcorp Industries Inc. SVM Arno Toelkes Euro-Composites SVM
The Non Metallic Materials Testing Task Group is conducting audits to demonstrate compliance to the PRI AC7122-I for Independent Testing Laboratories, PRI AC7122-P for Part Manufacturers Captive Laboratories and PRI AC7122-R for Raw Materials Manufacturers Captive Laboratories. These audits address the Nadcap requirements for the testing of Class A: Composites and Class B: Adhesive/Adhesive Primer
• Mechanical Testing • Physical Testing
• Chemical Testing • Thermal Testing
• Flammability Testing
TASK GROUP VOTING MEMBERS
Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM Peter Atwell AIRBUS. SEC/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group UVM Peter Bonarrigo Bombardier, Inc. ALT/UVM Ping Chen COMAC UVM Claude Chevalier SAFRAN Group ALT/UVM Ray Cleghorn The Boeing Company ALT/UVM David Constable AIRBUS ALT/UVM
Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM Patrick Dunleavy SAFRAN Group ALT/UVM Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Eurocopter UVM Olivier Goupillon Eurocopter ALT/UVM Steve Grunshaw BAE Systems-Military & Air Solutions ALT/UVM Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM Mark Jackson Triumph Group Inc. UVM
Mike Kahler Ball Aerospace & Technologies UVM John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Muriel Malhomme AIRBUS ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Larry Olsen Northrop Grumman Corp. UVM
Keith Panuska Lockheed Martin VCH/UVM Jeremy Phillips Cessna Aircraft Company UVM Alberto Portal Airbus Military / EADS CASA UVM Sally Spindor Triumph Group, Inc. ALT/UVM Kenneth Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier, Inc. UVM Colin Stuart Rolls-Royce UVM Justin Walker Spirit AeroSystems ALT/UVM Yuan Yuhui COMAC ALT/UVM
Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Paul Braun Cincinnati Testing Labs SVM Jim Brown Hexcel Composites SVM Gordon Cameron Integrated Technologies Inc. SVM Pierangelo Campagna EXOVA (UK) Limited SVM
William DeLaurier IMR Test Labs SVM Jim Ferrel Cytec Engineered Materials ALT/SVM Dennis Kidd Cincinnati Testing Labs Inc. ALT/SVM Tommie Lakes GKN Aerospace SVM John Moylan Delsen Testing Labs SVM
Rick Price Park Aerospace Technologies Corp ALT/SVM Jim Rossi Westmoreland Mechanical Testing SVM Don Russell Toray Composites ALT/SVM Colleen Saunders Toray Composites SVM
Steve Schrameyer Cytec Engineered Materials SVM Vitorio Stana Avcorp Industries Inc. SVM Nancy Vancil Toray Carbon Fibers America Inc. SVM Nicolas Vetel Critt-Materiaux MPC SVM
The Nadcap Sealants program consists of two types of audits: (1) Sealant Manufacturers: AC7200/1 - on-site inspection of aerospace sealant manufacturers (2) Value-Added Sealant Distributors: AC7202 Testing and fabrication techniques included in the audit criteria: • Two-Part Polysulfide Sealants • Silicones and Fluorosilicones • Polyurethanes
Subscriber Voting Members Jerry Brown Lockheed Martin Corp. ALT/UVM Brent Clothier Cessna Aircraft Company VCH/UVM Kent DeFranco Lockheed Martin Corp. CHR/UVM (Chair – December 2011) Aleck Featherston Bell Helicopter Textron UVM
Jeffrey Kingsley Air Force UVM/GVT Diane Kleinschmidt NAVAIR UVM/GVT Manuel Koucouthakis Honeywell Aerodapce UVM Angelina Mendoza Goodrich (UTAS) ALT/UVM
Supplier Voting Members Jim Carney National Sealants & Lubricants SVM Suzanna DeMoss 3M Company Aerospace and Aircraft Maintenance Department SVM Derek Hughes PPG Aerospace PRC DeSoto ALT/SVM John Lane Integral Products Inc. SVM
Josh Mazin Flamemaster Corp ASVM Philip Shackley PPG Aerospace/PRC DeSoto Intl. SVM Linda Smith Flamemaster Corporation SVM Jeff Steele D Aircraft Products Inc. SVM Randy Wilt Graco Supply & Integrated Services SVM
Jonathan Zook 3M Company Aerospace and Aircraft Maintenance Department ALT/SVM
Process specific requirements have been developed by the Welding Task Group and are contained in the AC7110 series of checklists. Welding processes covered include: • Diffusion Welding • Electron Beam Welding • Flash Welding • Friction/Inertia Welding • Fusion Welding
TASK GROUP VOTING MEMBERS Subscriber Voting Members Robbie Adams Honeywell ALT/UVM Osawonuyi Agbonkonkon Parker Hannifin Corp ALT/UVM Carlos Alfaro Eaton Aerospace ALT/UVM Gary Coleman The Boeing Company ALT/UVM Caroline DesLandes Bombardier Inc ALT/UVM Andrew Dewhurst BAE Systems Air & Information (MAI) ALT/UVM Chris English GE Aviation SEC/UVM William Fitzgerald Northrop Grumman Corp. UVM Bob Fletcher BAE Systems Air & Information (MAI) UVM Larry Hamanishi The Boeing Company ALT/UVM
Milan Hanyk Honeywell Aerospace UVM Les Hellemann GE Aviation ALT/UVM/ALT/SEC Scott Iby Hamilton Sundstrand (UTAS) ALT/UVM Michael Irvin The Boeing Company UVM Jerry Isoaho GKN Aerospace Sweden AB UVM Günther Jakobi Rolls-Royce ALT/UVM Hugh Jamison Bombardier inc ALT/UVM Keith Kastner Cessna Aircraft Company UVM Ralph Kropp MTU Aero Engines GmbH CHR/UVM (Chair – July 2008) +49 89 1489 4035 Holger Krueger Airbus UVM
Mario Leclerc Bombardier Inc. UVM Donald Lenhart Spirit AeroSystems Inc UVM Dag Lindland Pratt & Whitney UVM Nick Magnapera BAE Systems Inc. UVM Scott Maitland Goodrich (UTAS) UVM Lyle Morris Raytheon Company UVM Rick Peterson Rockwell Collins Inc MBR Jeremy Phillips Cessna Aircraft Company ALT/UVM Marco Luigi Poletto Alenia Aermacchi SpA UVM Earl Pruett Lockheed Martin Corp UVM
Brian Ricks Raytheon Company ALT/UVM John Sanders Hamilton Sundstrand (UTAS) UVM Paul Slater Rockwell Collins Inc MBR Ken Sposato Triumph Group UVM Tim Storm Parker Hannifin Corp UVM David Struckman Eaton Aerospace UVM Steve Tooley Rolls-Royce VCH/UVM Gary Winters Northrop Grumman Corp ALT/UVM
Supplier Voting Members James Ahlemeyer Ducommun AeroStructures SVM Christopher Kielb Advance Welding SVM
