Date post: | 26-May-2018 |
Category: |
Documents |
Upload: | nguyenmien |
View: | 217 times |
Download: | 0 times |
Shibuya Dymodrill machines offer you a whole new concept of drilling; from a wide variety of handheld to small, medium and large motor core drills that give you both power and convenience.
High torque force without using much electric power.
Currently the lightest in the market making it easy to handle and carry, some models even come in cases.
High reliability and durability as well as a very low initial breakdown rate makes Shibuya an ideal brand in the coring industry.
A comprehensive ventilation system keeps the noise at a minimum.
The motor ventilation system is designed with superb air cooling capacity that actually prevents water from flowing inside.
The circuit protector is the product of meticulous planning that ensures the motor is protected from an overload.
The water ring and storable spring tension clamps come as a standard accessory for TS 092/132/182/252.
The water inlet swivels at 360 degrees which allows for easy connection to a water hose even in tight areas.
A handle thatʼs easy to maneuver which accommodates greatly in different working conditions without extra tools necessary.
The PRCD is a genius design that automatically cuts off electricity during a surge. (Standard feature for the 220-240V machines).
SPECIFICATIONPower Voltage : 240V
Power Frequncy : 50/60Hz
Rated Input : 40W
Power Amp : 7 - 18A
Weight : 6.9kg
Since 1952
The AFS is a product of diligent research and development from Shibuya; it is able to detect the load of the motor drill and adjust the feeding speed. It also has a smart detection system that automatically shuts off when the core bit penetrates working material.
It has 9 levels of load settings and is mountable on both the right and left side of the carriage block.
SUITABLE USE FOR TS-252 / TS402 SHIBUYA CORE DRILL MACHINE
VMSVACUUM MOUNTING SYSTEM
AFS-VAUTOMATIC FEEDING SYSTEM
Never use vacuum pads for drilling in unstable positions such as vertical walls or ceilings.
Use a vacuum pump and maintain the power to a degree of -0.08 to -0.1 MPa.CAUTION!
Always keep an eye on the machine while it operates and stay at a position where you can immediately stop the machine in case of an emergency.
CAUTION!
VACUUM PAD FOR DRILL STANDCome in many sizes:
STAIRCASE VACUUM PAD 4” Shibuya Dymodrill TS092
XS 4” Shibuya Dymodrill TS092
S 6” & 7” Shibuya Dymodrill TS132 & TS162
L 8” & 10” Shibuya Dymodrill TS182 & TS252
XL 16” Shibuya Dymodrill TS402
XS S
L XL
STAIRCASE VACUUM PAD
HUME PIPE VACUUM PAD
CARELINE 1800-88-8770
Control Panel View
CO
MPL
ETE
EXA
MPL
E
Best matched with Shibuyaʼs vacuum pads.
Maximum Vacuum degree: -0.09 MPa.
Pumping speed : 40-45 L/min.
Size : 202mm x 308mm x 317mm.
Weight : 13.1kg
V300VACUUM PUMP
The vacuum mounting system does not need an anchor, hence removes the worry of damaging the mounting surface and saves the time on anchoring. The pad may be mounted on surfaces like concrete, tiles, marble etc.
SAVE TIMESAVE COST
SAVE ENVIRONMENT
TS092 Height : 805mm
Base : 119 x 154mm
Stand Type : Angle Stand
Rated Input : 1100W
Gear : 1 Speed
Travel Length : 320mm 557.5mm
No. Load Speed : 970rpm 1750rpm
Preferred Core Bit : 20-60mm 60-120mmDiameter
Up To
5”
TS092AS TS092HAS TS092ASC R1011 R1012 R1011 (Case)
TS132 Height : 803 1003 800mm
Base : 146 x 205mm
Stand Type : Fixed Angle Stand
Rated Input : 1500W
Gear : 1 Speed
Travel Length : 548mm 557.5mm
No. Load Speed : 850rpm
Preferred Core Bit : 50 - 160mmDiameter
Up To
6”
TS132FS TS132AS TS132FSC R1511 R1511 R1511 (Case)
TS162 Height : 803 1003 800mm
Base : 146 x 205mm
Stand Type : Fixed Angle Stand
Rated Input : 1500W
Gear : 2 Speed
Travel Length : 548mm 557.5mm
No. Load Speed : 700rpm / 1000rpm
Preferred Core Bit : 50 - 180mmDiameter
Up To
7”
TS162FS TS162AS TS162ASC R1521 R1521 R1521 (Case)
TS252 Height : 803mm 1003mm
Base : 158x217 46x205mm
Stand Type : Fixed Angle Stand
Rated Input : 1700W
Gear : 2 Speed
Travel Length : 488mm 688mm
No. Load Speed : 450rpm / 900rpm
Preferred Core Bit : 50 - 250mmDiameter
Up To
10”
TS252FS TS252AS R1011 R1012
Up To
2.5”
Up To
7”
RH1531 Rated Input : 1500W
Gear : 3 Speed
No. Load Speed : 800 / 2000 / 4150 rpm
Preferred Core Bit : 14.5 - 66mmDiameter
TS402 Height : 1003mm
Base : 176x275 186x250mm
Stand Type : Fixed Angle Stand
Rated Input : 2800W
Gear : 2 Speed
Travel Length : 618mm
No. Load Speed : 300rpm / 700rpm
Preferred Core Bit : 100 - 400mmDiameter
TSH163Mounted Stand For RH1531 Height : 800mm
Base : 146 x 205mm
Stand Type : Angle Stand
Travel Length : 548mm
Preferred Core Bit : 14.5 - 180mmDiameter (Rig Mounted)
Up To
16”
TS402FS TS402AS R2221 R2221
TS603FS Height : 1106mm
Base : 230 x 400mm
Stand Type : Fixed Stand
Rated Input : 2800W
Gear : 3 Speed
Travel Length : 625mm
No. Load Speed : 150 / 300 / 600rpm
Preferred Core Bit Diameter :100 - 600mm
Up To
24”
Able to cut up toan angle of 40°
Water Collection Ring(Vacuum)
Promotes a healthy & clean enviroment for both wet & dry coring as it contains the splash of concrete slurry.
Water Collector FixtureThis fixture is to help the water collection ring hold its position.
Bit OpenerComes as a 2 piece set. A quick & efficient way to dismantle a 3 piece diamond core bit without damaging any part of the body.
Extension RodExtension rods are an excellent accessory for jobs that require deep coring, they are also easy to pick out with a bit removal tool after the job is done.
Quick Release SpacerEnables quick and easy mounting/dismounting of the drill motor especially for the larger models.
Slurry Collector SC-25The SC-25 is a simple sewerage treatment system that keeps the environment cleaner with a special durable filter that separates slurry and water for a more professional job. It can be connected to another SC-25 to collect even more slurry.
Foot BaseIdeal for drilling asphalt and premix. No anchoring is needed, the body weight itself is enough to support the stability of coring.
The Foot Base is applicable to TS092, TS132 and TS162.
Water Collection RingPromotes a healthy & clean enviroment for both wet coring as it contains the splash of concrete slurry.
Come with 2 Size : 4” & 7”
Come with 4” to 24”
Bit Removal